excavator 1.1 make & model5) exc… · case excavator attachments 2/20/2017. e-95 excavators...

E-95EXCAVATORS#770-817

STATE OF MINNESOTAPRICING PAGES

(Typed responses required)

August, 2017

Titan Machinery Case CX17C

Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:Website: www.titanmachinery.com

2010

1.1 Make & Model CX17COperating Weight 3,910 lbEngine Make & Model Kubota D902Tier (Interim 4 or Final)? Tier 4 FinalHP at rated RPM (specify net or gross) 16.8 Gross HPNumber of speeds Two-speedMax travel speed, MPH 2.5 MPHDrawbar pull, lbs. 3,300 lbShoe width, in. 9" Rubber Track# of rollers on lower track Four per sideGround pressure, PSI 3.98 PSIGround clearance, in. 6.7" minimum

Overall width of excavatorVariable 3' 3" Retracted, 4' 3" Extended

Main pump(s) total flow, GPM 16 GPMSwing speed, RPM 9.5 RPMBoom length, ft-in 5' 11"Arm length, ft-in 3' 2"Arm breakout force, Normal, lb-ft 1,920 lbfMax dig depth, ft-in 7' 3"Reach at ground line, ft-in 12' 6"Dump height, ft-in 8' 5"Lift over end, 10’, lbs. 930 lbLift over end, max reach, lbs. 690 lbLift over side, 10’, lbs. 460 lbLift over side max reach, lbs. 400 lbBucket breakout force, normal lb-ft. 3,490 lbfTail swing radius, ft-in. 3' 3"Does excavator include bucket? NoIf so, descriptionWarranty Terms: hours/months/years 2 Year/3000 hr

Price 22,750$

Furnish separate price quote for: EXCAVATOR

[email protected]

Version of Excel used:

952-445-0365

Titan Machinery IncBrenden Honebrink6340 County Road 101 E

Shakopee, MN 55379

http://www.titanmachinery.com/

mailto:[email protected]




August, 2017

Titan MachineryCase CX17C Options

2.0 OPERATOR ENVIRONMENT OPTIONS2.1 ROPS/FOPS Canopy2.2 Travel alarm

3.0 EXCAVATOR EXTERIOR AND POWERTRAIN OPTIONS3.1 Hydraulically controlled dozer blade - front3.2 Whelen strobe3.3 Rotating Beacon3.4 Additional Countweight

4.0 UNDERCARRIAGE OPTIONS4.1 9" Rubber track4.2 Varible Width Undercarriage

5.0 HYDRAULICS OPTIONS5.1 Control pattern selector valve5.2 Nibbler & breaker auxiliary valve & piping5.3 2 Way Aux Pedal Proportional5.4 2 Way Aux Joystick Proportional

6.0 BOOM AND ARM OPTIONS6.1 5' 11" Boom6.2 3' 2" Arm6.3 3' 8" Arm (option 3.4 required)

7.0 BUCKET/COUPLERS/TOOL OPTIONS7.1 Pin Grabber Coupler7.2 Dead Pin Kit7.3 10" Heavy Duty Bucket (for 7.1)7.4 12" Heavy Duty Bucket (for 7.1)7.5 16" Heavy Duty Bucket (for 7.1)7.6 18" Heavy Duty Bucket (for 7.1)7.7 Klac Manual Coupler7.8 Klac Top Plate7.9 10" Heavy Duty Bucket (for 7.7)7.10 12" Heavy Duty Bucket (for 7.7)7.11 16" Heavy Duty Bucket (for 7.7)7.12 18" Heavy Duty Bucket (for 7.7)

8.0 COMPLETE SET OF OEM AIR AND FLUID FILTERS

9.0 INSTALLATION: HOURLY RATE FOR ATTACHMENT INSTALLATIONS, ETC.:(See Special Terms and Conditions)




August, 2017


10.0 EXTENDED WARRANTY OPTIONSCase standard warranty on Mini Excavators is two years -3000 hours

Case Warranty covers the CASE machine only.Protection Plan must be purchased with-in first 90 days or add 15% additionalduring base warranty.Mfg's standard warranty is applicable to non-CASE equipment.

Case Purchased Protection Plan - Zero deductible

Months/hours Coverage10.1 36/3000 - structural10.2 48/4000 - structural10.3 60/5000 - structural

10.4 36/3000 - power train only10.5 48/4000 - power train only10.6 60/5000 - power train only

10.7 36/3000 - power train plus 10.8 48/4000 - power train plus 10.9 60/5000 - power train plus

10.10 36/3000 - full machine10.11 48/4000 - full machine10.12 60/5000 - full machine

11.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.

11.1 Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate:

Summer Weekly Rental Rate:Summer Monthly Rental Rate:

Percent (%) of Rental Fee applied to purchase price:

If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,state the actual interest rate here: ________________

12.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price




August, 2017


13.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES - (See Special Terms and Conditions)

Price List Date and Number



14.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS

DELIVERY STARTING POINT - City, State, Zip

Price per loaded mile




August, 2017


Standard747453 108$

Standard625$

747070 183$ 747995 95$

9552700 StandardStandard

StandardStandard

747054 Standard747055 Standard

Standard747320 Standard747329 213$

48057609 1,001$ 48057610 103$ 48057605 233$ 48057606 250$ 48057607 285$ 48057608 329$ 48057632 553$ 47422602 155$ 47422586 276$ 47422587 348$ 47422588 383$ 47422599 427$

500$

125$




August, 2017


171$ 210$ 243$

312$ 385$ 859$

513$ 688$

1,406$

688$ 892$

1,937$

N/A670$

1,800$ 80% first 90 days75% thereafter

5$




August, 2017


8% DiscountWerk-Brau 2017 Catalog

10% Discount

25% Discount

NO FLAT RATE ALLOWED

Nearest Titan Machinery Inc. Case CE Location

$4 / $250 Minimum

Woods Exc. Attachments 5/18/2017

Case Excavator Attachments 2/20/2017




August, 2017

Titan Machinery Case CX26C


2010

1.1 Make & Model Case CX26COperating Weight 8,660 lbEngine Make & Model Yanmar 3TNV88F-ESHYBTier (Interim 4 or Final)? Tier 4 FinalHP at rated RPM (specify net or gross) 24.4 Gross HPNumber of speeds Two-speedMax travel speed, MPH 2.6 MPHDrawbar pull, lbs. 3,300 lbShoe width, in. 9.8" Rubber Track# of rollers on lower track Four per sideGround pressure, PSI 4.83 psiGround clearance, in. 11" minimumOverall width of excavator 5' 9"Main pump(s) total flow, GPM 14.6 GPMSwing speed, RPM 9.1 RPMBoom length, ft-in 6' 5"Arm length, ft-in 3' 8"Arm breakout force, Normal, lb-ft 3 280 lbsMax dig depth, ft-in 7' 11"Reach at ground line, ft-in 14' 3"Dump height, ft-in 9' 7"Lift over end, 10’, lbs. 2,340 lbLift over end, max reach, lbs. 1,430 lbLift over side, 10’, lbs. 670 lbLift over side max reach, lbs. 450 lbBucket breakout force, normal lb-ft. 4,740 lbfTail swing radius, ft-in. 2' 10"Does excavator include bucket? NoIf so, descriptionWarranty Terms: hours/months/years 2 Year/3000 hr

Price 30,995$


[email protected]


952-445-0365


Shakopee, MN 55379






August, 2017


2.0 OPERATOR ENVIRONMENT OPTIONS2.1 ROPS/FOPS Canopy (2,783)$ 2.2 Cab with Heater, A/C Standard2.3 Travel alarm 741453 135$ 2.4 Bluetooth Radio Standard2.5 LCD Monitor Standard

3.0 EXCAVATOR EXTERIOR AND POWERTRAIN OPTIONS3.1 Hydraulically controlled dozer blade - front Standard3.2 Whelen strobe 625$ 3.3 Rotating Beacon 747070 183$ 3.4 Additional counterweight 747995 135$

4.0 UNDERCARRIAGE OPTIONS4.1 9.8" Rubber track 747453 Standard

5.0 HYDRAULICS OPTIONS5.1 Control pattern selector valve Standard5.2 Nibbler & breaker auxiliary valve & piping Standard5.3 2 Way Aux Pedal Proportional 747054 Standard5.4 2 Way Aux Joystick Proportional 747055 Standard5.5 2nd Aux 2 Way Proportional 747053 1,065$

6.0 BOOM AND ARM OPTIONS6.1 6' 5" Boom Standard6.2 3' 8" Arm 747320 Standard6.3 4' 5" Arm (option 3.4 required) 747329 213$ 6.4 Thumb Bracket 747058 289$ 6.5 Linkage without Hook 747063 (40)$ 6.6 Hydraulic Quick Coupler Provision (Switch & Hyrdaulics to end of arm) 747064 326$

7.0 BUCKET/COUPLERS/TOOL OPTIONS7.1 Pin Grabber Coupler 48057615 1,003$ 7.2 Hydraulic Pin Grabber Coupler 48094307 2,208$ 7.3 Dead Pin Kit 47457879 116$ 7.4 12" Heavy Duty Bucket (for 7.1 & 7.2) 48057611 340$ 7.5 18" Heavy Duty Bucket (for 7.1 & 7.2) 48057612 406$ 7.6 24" Heavy Duty Bucket (for 7.1 & 7.2) 48057613 520$ 7.7 Klac Manual Coupler 48057633 719$ 7.8 Klac Top Plate 47422632 186$ 7.9 12" Heavy Duty Bucket (for 7.7) 48094116 348$ 7.10 18" Heavy Duty Bucket (for 7.7) 48094117 408$ 7.11 24" Heavy Duty Bucket (for 7.7) 48094118 522$ 7.12 Hydraulic Short Tine Thumb 48058019 1,466$ 7.13 Hydraulic Long Tine Thumb 48094114 1,466$

8.0 COMPLETE SET OF OEM AIR AND FLUID FILTERS 500$

9.0 INSTALLATION: HOURLY RATE FOR ATTACHMENT INSTALLATIONS, ETC.:(See Special Terms and Conditions) 125$







August, 2017


Months/hours Coverage10.1 36/3000 - structural 171$ 10.2 48/4000 - structural 210$ 10.3 60/5000 - structural 243$

10.4 36/3000 - power train only 312$ 10.5 48/4000 - power train only 385$ 10.6 60/5000 - power train only 859$

10.7 36/3000 - power train plus 513$ 10.8 48/4000 - power train plus 688$ 10.9 60/5000 - power train plus 1,406$

10.10 36/3000 - full machine 688$ 10.11 48/4000 - full machine 892$ 10.12 60/5000 - full machine 1,937$


11.1 Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate: N/A

Summer Weekly Rental Rate: 760$ Summer Monthly Rental Rate: 2,025$

Percent (%) of Rental Fee applied to purchase price: 80% first 90 days75% thereafter


12.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price 6$

13.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES - (See Special Terms and Conditions) 8% Discount

Price List Date and Number Werk-Brau 2017 Catalog

10% Discount


25% Discount


14.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED

DELIVERY STARTING POINT - City, State, Zip Nearest Titan Machinery Inc.

Case CE Location

Price per loaded mile $4 / $250 Minimum






August, 2017

Titan MachineryCase CX33C of 116


2010

1.1 Make & Model CX33COperating Weight 7,420 lbEngine Make & Model Yanmar 3TN88F-ESHYBTier (Interim 4 or Final)? Tier 4 FinalHP at rated RPM (specify net or gross) 24.4 Gross HPNumber of speeds Two-speedMax travel speed, MPH 2.6 MPHDrawbar pull, lbs. 6,835 lbShoe width, in. 12" Rubber Track# of rollers on lower track Four per sideGround pressure, PSI 3.98 PSIGround clearance, in. 11" minimumOverall width of excavator 5' 1"Main pump(s) total flow, GPM 19.8 GPMSwing speed, RPM 9.0 RPMBoom length, ft-in 7' 10"Arm length, ft-in 4' 3"Arm breakout force, Normal, lb-ft 4,390 lbfMax dig depth, ft-in 9' 11"Reach at ground line, ft-in 16' 7"Dump height, ft-in 10' 9"Lift over end, 10’, lbs. 2,880 lbLift over end, max reach, lbs. 1,360 lbLift over side, 10’, lbs. 810 lbLift over side max reach, lbs. 420 lbBucket breakout force, normal lb-ft. 6,900 lbfTail swing radius, ft-in. 2' 10"Does excavator include bucket? NoIf so, descriptionWarranty Terms: hours/months/years 2 Year/3000 Hr

Price 31,700$


[email protected]


952-445-0365


Shakopee, MN 55379






August, 2017

Titan MachineryCase CX33C Options of 116

2.0 OPERATOR ENVIRONMENT OPTIONS2.1 ROPS/FOPS Canopy Standard2.2 Travel alarm 747453 135$

3.0 EXCAVATOR EXTERIOR AND POWERTRAIN OPTIONS3.1 Hydraulically controlled dozer blade - front Standard3.2 Whelen strobe 625$ 3.3 Rotating Beacon 747070 183$ 3.4 Additional counter weight 747996 135$

4.0 UNDERCARRIAGE OPTIONS4.1 9.8" Rubber track 9552700 Standard4.2 Steel tracks ILO Rubber 9553700 862$


6.0 BOOM AND ARM OPTIONS6.1 7' 7" Boom Standard6.2 4''3" Arm 747320 Standard6.3 5' 3" Arm (option 3.4 required) 747329 213$ 6.4 Linkage without Hook 747063 (40)$ 6.5 Hydraulic Quick Coupler Provision (Switch & Hyrdaulics to end of arm) 747064 326$

7.0 BUCKET/COUPLERS/TOOL OPTIONS7.1 Pin Grabber Coupler 48057623 1,007$ 7.2 Hydraulic Pin Grabber Coupler 48058013 2,208$ 7.3 Dead Pin Kit 47457880 128$ 7.4 12" Heavy Duty Bucket (for 7.1 & 7.2) 48057617 505$ 7.5 18" Heavy Duty Bucket (for 7.1 & 7.2) 48057619 559$




August, 2017


7.6 24" Heavy Duty Bucket (for 7.1 & 7.2) 48057620 651$ 7.7 36" Heavy Duty Bucket (for 7.1 & 7.2) 48057621 828$ 7.8 36" Ditching Bucket (for 7.1 & 7.2) 48057622 687$ 7.9 Ripper Tooth (for 7.1 & 7.2) 48057638 606$ 7.10 Klac Manual Coupler 48057634 808$ 7.11 Klac Top Plate 47422660 227$ 7.12 12" Heavy Duty Bucket (for 7.10) 47422654 657$ 7.13 18" Heavy Duty Bucket (for 7.10) 47422655 712$ 7.14 24" Heavy Duty Bucket (for 7.10) 47422656 804$ 7.15 36" Heavy Duty Bucket (for 7.10) 47422657 982$ 7.16 36" Ditching Bucket (for 7.10) 47422658 743$ 7.17 Ripper Tooth (for 7.10) 47873455 606$ 7.18 Hydraulic Short Tine Thumb 48059646 1,533$ 7.19 Hydraulic Long Tine Thumb 48058020 1,533$










August, 2017













August, 2017





10% Discount


25% Discount




Case CE Location







August, 2017



2010

1.1 Make & Model CX37COperating Weight 8,660 lbEngine Make & Model Yanmar 3TNV88F-ESHYBTier (Interim 4 or Final)? Tier 4 FinalHP at rated RPM (specify net or gross) 24.4 Gross HPNumber of speeds Two-speedMax travel speed, MPH 2.6 MPHDrawbar pull, lbs. 6,835 lbShoe width, in. 12" Rubber Track# of rollers on lower track Four per sideGround pressure, PSI 4.83 PSIGround clearance, in. 11" minimumOverall width of excavator 5' 9"Main pump(s) total flow, GPM 19.8 GPMSwing speed, RPM 9.5 RPMBoom length, ft-in 8' 2" Arm length, ft-in 4' 3"Arm breakout force, Normal, lb-ft 4,390 lbfMax dig depth, ft-in 10' 3"Reach at ground line, ft-in 17' 1"Dump height, ft-in 11' 3"Lift over end, 10’, lbs. 2410 lbLift over end, max reach, lbs. 1,240 lbLift over side, 10’, lbs. 1440 lbLift over side max reach, lbs. 750 lbBucket breakout force, normal lb-ft. 6,900 lbfTail swing radius, ft-in. 3' 3"Does excavator include bucket? NoIf so, descriptionWarranty Terms: hours/months/years 2 Year/3000 hr

Price 39,875$


[email protected]


952-445-0365


Shakopee, MN 55379






August, 2017


2.0 OPERATOR ENVIRONMENT OPTIONS2.1 ROPS/FOPS Canopy (5,593)$ 2.2 Cab with Heater, A/C Standard2.3 Travel alarm 741453 135$ 2.4 Bluetooth Radio Standard2.5 LCD Monitor Standard

3.0 EXCAVATOR EXTERIOR AND POWERTRAIN OPTIONS3.1 Hydraulically controlled dozer blade - front Standard3.2 Whelen strobe 625$ 3.3 Rotating Beacon 747070 183$ 3.4 Additional counterweight 747995 137$

4.0 UNDERCARRIAGE OPTIONS4.1 12" Rubber track 9552700 Standard4.2 Steel tracks ILO Rubber 9553700 1,002$


6.0 BOOM AND ARM OPTIONS6.1 6' 5" Boom Standard6.2 4' 3"Arm 747320 Standard6.3 5' 3" Arm (option 3.4 required) 747329 213$ 6.4 Linkage without Hook 747063 (40)$ 6.5 Hydraulic Quick Coupler Provision (Switch & Hyrdaulics to end of arm) 747064 326$

7.0 BUCKET/COUPLERS/TOOL OPTIONS7.1 Pin Grabber Coupler 48057623 1,007$ 7.2 Hydraulic Pin Grabber Coupler 48058013 2,208$




August, 2017


7.3 Dead Pin Kit 47457880 128$ 7.4 12" Heavy Duty Bucket (for 7.1 & 7.2) 48057617 505$ 7.5 18" Heavy Duty Bucket (for 7.1 & 7.2) 48057619 559$ 7.6 24" Heavy Duty Bucket (for 7.1 & 7.2) 48057620 651$ 7.7 36" Heavy Duty Bucket (for 7.1 & 7.2) 48057621 828$ 7.8 36" Ditching Bucket (for 7.1 & 7.2) 48057622 687$ 7.9 Ripper Tooth (for 7.1 & 7.2) 48057638 606$ 7.10 Klac Manual Coupler 48057634 808$ 7.11 Klac Top Plate 47422660 227$ 7.12 12" Heavy Duty Bucket (for 7.10) 47422654 657$ 7.13 18" Heavy Duty Bucket (for 7.10) 47422655 712$ 7.14 24" Heavy Duty Bucket (for 7.10) 47422656 804$ 7.15 36" Heavy Duty Bucket (for 7.10) 47422657 982$ 7.16 36" Ditching Bucket (for 7.10) 47422658 743$ 7.17 Ripper Tooth (for 7.10) 47873455 606$ 7.18 Hydraulic Short Tine Thumb 48059646 1,533$ 7.19 Hydraulic Long Tine Thumb 48058020 1,533$






Months/hours Coverage10.1 36/3000 - structural 171$




August, 2017


10.2 48/4000 - structural 210$ 10.3 60/5000 - structural 243$













August, 2017




10% Discount


25% Discount




Case CE Location







August, 2017


Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:

2010

1.1 Make & Model Case CX57COperating Weight 12,320 lbEngine Make & Model Yanmar 4TNV98CTier (Interim 4 or Final)? Tier 4 FinalHP at rated RPM (specify net or gross) 66.9 Gross HPNumber of speeds Two-speedMax travel speed, MPH 2.6 MPHDrawbar pull, lbs. 11 680 lbShoe width, in. 15" (400mm) Rubber Track# of rollers on lower track Five per sideGround pressure, PSI 4.8 PSIGround clearance, in. 1' 3" minimumOverall width of excavator 6' 4"Main pump(s) total flow, GPM 30.6 GPMSwing speed, RPM 9.1 RPMBoom length, ft-in 9' 10"Arm length, ft-in 5' 3"Arm breakout force, Normal, lb-ft 7,190 lbfMax dig depth, ft-in 12' 6"Reach at ground line, ft-in 19' 9"Dump height, ft-in 13' 3"Lift over end, 10’, lbs. 5,920 lbLift over end, max reach, lbs. 2,480Lift over side, 10’, lbs. 2,730 lbLift over side max reach, lbs. 1,330 lbBucket breakout force, normal lb-ft. 9,550 lbfTail swing radius, ft-in. 5' 5"Does excavator include bucket? NoIf so, descriptionWarranty Terms: hours/months/years 2 Year/3000 hr

Price 53,400$


[email protected]

952-445-0365



Shakopee, MN 55379





August, 2017


2.0 OPERATOR ENVIRONMENT OPTIONS2.1 Cab with Heater, A/C Standard2.2 Travel alarm 747543 198$ 2.3 Rearview Camera 747090 387$ 2.4 Bluetooth Radio Standard2.5 LCD Monitor Standard

3.0 EXCAVATOR EXTERIOR AND POWERTRAIN OPTIONS3.1 Hydraulically controlled dozer blade - front Standard3.2 Whelen strobe 625$ 3.3 No Rotating Beacon 747087 (30)$ 3.4 Additional Counterweight 747084 441$

4.0 UNDERCARRIAGE OPTIONS4.1 15.7" Rubber tracks 9552711 Standard4.2 17.7" Steel tracks ILO Rubber 9552610 1,513$ 4.3 15" Steel tracks ILO Rubber 9552611 1,232$ 4.4 15.7" Steel Tracks with Pades 9552612 2,766$ 4.5 15.7" Rubber Link Tracks 9552710 7,817$ 4.6 Full Track Guide 747096 441$


6.0 BOOM AND ARM OPTIONS6.1 9' 10" Boom Standard6.2 5' 3" Arm w/ thumb bracket 747078 Standard6.3 6' 3" Arm w/ thumb bracket (option 3.4 required) 747079 595$ 6.4 Linkage without Hook 747063 (91)$ 6.5 Hydraulic Quick Coupler Provision (Switch & Hyrdaulics to end of arm) 747064 418$




August, 2017


7.0 BUCKET/COUPLERS/TOOL OPTIONS7.1 Pin Grabber Coupler 48057630 1,007$ 7.2 Hydraulic Pin Grabber Coupler 48058014 2,120$ 7.3 B/C Series Mechanical Coupler 48082917 537$ 7.4 Dead Pin Kit 48057631 136$ 7.5 12" Heavy Duty Bucket (for 7.1, 7.2 & 7.3) 48057625 607$ 7.6 18" Heavy Duty Bucket (for 7.1, 7.2 & 7.3) 48057626 653$ 7.7 24" Heavy Duty Bucket (for 7.1, 7.2 & 7.3) 48057627 746$ 7.8 36" Heavy Duty Bucket (for 7.1, 7.2 & 7.3) 48057628 918$ 7.9 36" Ditching Bucket (for 7.1, 7.2 & 7.3) 48057629 688$ 7.10 36" Cemetary Bucket (for 7.1, 7.2 & 7.3) 48057637 783$ 7.11 Ripper Tooth (for 7.1, 7.2 & 7.3) 48057639 606$ 7.12 Klac Manual Coupler 48057636 833$ 7.13 Klac Top Plate 47422660 227$ 7.14 12" Heavy Duty Bucket (for 7.12) 47422702 760$ 7.15 18" Heavy Duty Bucket (for 7.12) 47422703 807$ 7.16 24" Heavy Duty Bucket (for 7.12) 47422704 899$ 7.17 36" Heavy Duty Bucket (for 7.12) 47422705 1,071$ 7.18 36" Ditching Bucket (for 7.12) 47422658 743$ 7.19 36" Cemetary Bucket (for 7.12) 47872281 783$ 7.20 Ripper Tooth (for 7.12) 47873455 606$ 7.21 Hydraulic Short Tine Thumb 48058021 1,600$ 7.22 Hydraulic Long Tine Thumb 48059650 1,600$ 7.23 Fx45a QT Quiet Technology Hydraulic Breaker 5,425$ 7.24 Fx55a FSP Hydraulic Breaker 9,575$ 7.25 Fx55a QT Quiet Technology Hydraulic Breaker 10,275$ 7.26 HP65II FT 6,125$






August, 2017











Summer Weekly Rental Rate: 940$




August, 2017


Summer Monthly Rental Rate: 2,520$ Percent (%) of Rental Fee applied to purchase price: 80% first 90 days

75% thereafter





August, 2017





10% Discount


25% Discount


14.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWEDEXTENDED WARRANTY OPTIONS


Case CE Location







August, 2017

Titan MachineryCase CX60C


2010

1.1 Make & Model Case CX60COperating Weight 13,430 lbEngine Make & Model Yanmar 4TNV98CTier (Interim 4 or Final)? Tier 4 FinalHP at rated RPM (specify net or gross) 64.7 Gross HPNumber of speeds Two-speedMax travel speed, MPH 2.5 MPHDrawbar pull, lbs. 11,680 lbsShoe width, in. 15" Rubber Track# of rollers on lower track Five per sideGround pressure, PSI 5.12 PSIGround clearance, in. 1' 3" minimumOverall width of excavator 6' 6"Main pump(s) total flow, GPM 29 GPMSwing speed, RPM 8.8 RPMBoom length, ft-in 9' 6" Arm length, ft-in 4' 10"Arm breakout force, Normal, lb-ft 5,950 lbfMax dig depth, ft-in 11' 9"Reach at ground line, ft-in 19' 9"Dump height, ft-in 12' 11"Lift over end, 10’, lbs. 6,560 lbLift over end, max reach, lbs. 2,210 lbLift over side, 10’, lbs. 2,540 lbLift over side max reach, lbs. 1,060 lbBucket breakout force, normal lb-ft. 9,190 lbfTail swing radius, ft-in. 3' 9"Does excavator include bucket? NoIf so, descriptionWarranty Terms: hours/months/years 2 Year/3000 hr

Price 56,300$


[email protected]


952-445-0365


Shakopee, MN 55379






August, 2017


2.0 OPERATOR ENVIRONMENT OPTIONS2.1 Cab with Heater, A/C2.2 Travel alarm2.3 Rearview Camera2.4 Bluetooth Radio 2.5 LCD Monitor

3.0 EXCAVATOR EXTERIOR AND POWERTRAIN OPTIONS3.1 Hydraulically controlled dozer blade - front3.2 Whelen strobe3.3 No Rotating Beacon3.4 Additional Counterweight

4.0 UNDERCARRIAGE OPTIONS4.1 15.7" Rubber tracks4.2 17.7" Steel tracks ILO Rubber 4.3 15" Steel tracks ILO Rubber4.4 15.7" Steel Tracks with Pades4.5 15.7" Rubber Link Tracks

5.0 HYDRAULICS OPTIONS5.1 Control pattern selector valve5.2 Nibbler & breaker auxiliary valve & piping5.3 2 Way Aux Pedal Proportional5.4 2nd Aux 2 Way Proportional

6.0 BOOM AND ARM OPTIONS6.1 9' 10" Boom6.2 4' 10" Arm w/ thumb bracket6.3 6' 3" Arm w/ thumb bracket (option 3.4 required)6.4 Linkage without Hook6.5 Hydraulic Quick Coupler Provision (Switch & Hyrdaulics to end of arm)

7.0 BUCKET/COUPLERS/TOOL OPTIONS7.1 Pin Grabber Coupler7.2 Hydraulic Pin Grabber Coupler7.3 B/C Series Mechanical Coupler7.4 Dead Pin Kit7.5 12" Heavy Duty Bucket (for 7.1, 7.2 & 7.3)7.6 18" Heavy Duty Bucket (for 7.1, 7.2 & 7.3)7.7 24" Heavy Duty Bucket (for 7.1, 7.2 & 7.3)7.8 36" Heavy Duty Bucket (for 7.1, 7.2 & 7.3)7.9 36" Ditching Bucket (for 7.1, 7.2 & 7.3)7.10 36" Cemetary Bucket (for 7.1, 7.2 & 7.3)




August, 2017


7.11 Ripper Tooth (for 7.1, 7.2 & 7.3)7.12 Klac Manual Coupler7.13 Klac Top Plate7.14 12" Heavy Duty Bucket (for 7.12)7.15 18" Heavy Duty Bucket (for 7.12)7.16 24" Heavy Duty Bucket (for 7.12)7.17 36" Heavy Duty Bucket (for 7.12)7.18 36" Ditching Bucket (for 7.12)7.19 36" Cemetary Bucket (for 7.12)7.20 Ripper Tooth (for 7.12)7.21 Hydraulic Short Tine Thumb7.22 Hydraulic Long Tine Thumb7.23 Fx45a QT Quiet Technology Hydraulic Breaker7.24 Fx55a FSP Hydraulic Breaker7.25 Fx55a QT Quiet Technology Hydraulic Breaker7.26 HP65II FT

8.0 COMPLETE SET OF OEM AIR AND FLUID FILTERS

9.0 INSTALLATION: HOURLY RATE FOR ATTACHMENT INSTALLATIONS, ETC.:(See Special Terms and Conditions)




Months/hours Coverage10.1 36/3000 - structural10.2 48/4000 - structural10.3 60/5000 - structural

10.4 36/3000 - power train only10.5 48/4000 - power train only10.6 60/5000 - power train only

10.7 36/3000 - power train plus 10.8 48/4000 - power train plus 10.9 60/5000 - power train plus




August, 2017


10.10 36/3000 - full machine10.11 48/4000 - full machine10.12 60/5000 - full machine


11.1 Summer Rental Rate - April 1 through Sept 30.Summer Hourly Rental Rate:

Summer Weekly Rental Rate:Summer Monthly Rental Rate:

Percent (%) of Rental Fee applied to purchase price:


12.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price

13.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES - (See Special Terms and Conditions)




14.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONSEXTENDED WARRANTY OPTIONS

DELIVERY STARTING POINT - City, State, Zip

Price per loaded mile




August, 2017


Standard747543 198$ 747090 387$

StandardStandard

Standard625$

747087 (30)$ 747084 867$

9552711 Standard9552610 1,513$ 9552611 1,232$ 9552612 2,885$ 9552710 8,154$

StandardStandard

747122 Standard747053 1,723$

Standard747078 Standard747079 595$ 747063 (91)$ 747064 418$

48057630 1,007$ 48058014 2,120$ 48082917 537$ 48057631 136$ 48057625 607$ 48057626 653$ 48057627 746$ 48057628 918$ 48057629 688$ 48057637 783$




August, 2017


48057639 606$ 48057636 833$ 47422660 227$ 47422702 760$ 47422703 807$ 47422704 899$ 47422705 1,071$ 47422658 743$ 47872281 783$ 47873455 606$ 48058021 1,600$ 48059650 1,600$

5,425$ 9,575$

10,275$ 6,125$

500$

125$

171$ 210$ 243$

312$ 385$ 859$

513$ 688$

1,406$




August, 2017


688$ 892$

1,937$

N/A940$

2,520$ 80% first 90 days75% thereafter

10$

8% DiscountWerk-Brau 2017 Catalog

10% Discount

25% Discount

NO FLAT RATE ALLOWED

Nearest Titan Machinery Inc. Case CE Location

$4 / $250 Minimum






August, 2017



2010

1.1 Make & Model Case CX75COperating Weight 16,380 lbEngine Make & Model Isuzu AP-4LE2XTier (Interim 4 or Final)? Tier 4 FinalHP at rated RPM (specify net or gross) 54 Net HPNumber of speeds Two-speedMax travel speed, MPH 3.2 MPHDrawbar pull, lbs. 13,376 lbShoe width, in. 18" (450 mm)# of rollers on lower track Five per sideGround pressure, PSI 4.8 PSIGround clearance, in. 14" minimumOverall width of excavator 7' 7"Main pump(s) total flow, GPM 39 GPMSwing speed, RPM 10.4 RPMBoom length, ft-in 12' 8" Arm length, ft-in 5' 7"Arm breakout force, Normal, lb-ft 8,880 lbfMax dig depth, ft-in 13' 7"Reach at ground line, ft-in 20' 7"Dump height, ft-in 17' 4"Lift over end, 10’, lbs. 5,850 lbLift over end, max reach, lbs. 1,950 lbLift over side, 10’, lbs. 4,990 lbLift over side max reach, lbs. 1,650 lbBucket breakout force, normal lb-ft. 12,792 lbfTail swing radius, ft-in. 4' 3"Does excavator include bucket? NoIf so, descriptionWarranty Terms: hours/months/years 12 Month/1800 Hours Full Machine

24 Month/2000 Hour Engine

Price 79,375$


[email protected]


952-445-0365


Shakopee, MN 55379






August, 2017


2.0 OPERATOR ENVIRONMENT OPTIONS2.1 Air conditioner Standard2.2 Adjustable deluxe seat w/3" retractable seat belt Standard2.3 One touch accelerator - decelerator Standard2.4 Front window safety glass and sky light Standard2.5 Heater/defroster Standard2.6 Radio - AM-FM Standard2.7 Selector valve for control pattern Standard2.8 Rear View Camera 461504 389$

3.0 EXCAVATOR EXTERIOR AND POWERTRAIN OPTIONS3.1 7' 7" Hydraulically controlled dozer blade - front Standard3.2 Whelen strobe 625$ 3.3 FOPS top guard, level 2 481070 747$ 3.4 Front grill - vertical bars w/6" spacing 461142 1,515$ 3.5 Front screen - 2" by 2" mesh 461024 865$ 3.6 Refuel Pump 481257 845$

4.0 UNDERCARRIAGE OPTIONS4.1 18" shoes (3 bar grouser) 9560017 Standard4.2 24" shoes (3 bar grouser) (Dozer blade will not cover full track width) 9560002 311$ 4.3 18" Full rubber tracks 9560020 2,340$ 4.4 18" Bolt-on Rubber Track (rubber pads bolted on regular 18" track) 9560018 3,836$

5.0 HYDRAULICS OPTIONSPlumbing and actuation for auxiliary hydraulics

5.1 Hammer Circuit Electrical Proportional Control, Joystick activated, single directional flow 461865 2,764$ (recommended for hammer use, not for use with offset boom option)

5.2 Thumb Hydraulic controls, single pump, two-way flow, use for thumb control 461871 3,503$ (not for use with offset boom option)

5.3 Hammer/High Flow Circuit, Electrical Proportional Control, Joystick Activated 461866 4,150$ single or dual directional flow. (not for use with offset boom option)

5.4 Hammer Circuit Electrical Proportional Control, Joystick activated, single directional flow 461866 3,060$ (recommended for hammer use, ONLY for use with offset boom option)




August, 2017


5.5 Thumb Hydraulic controls, single pump, two-way flow, use for thumb control 461873 2,280$ (ONLY for use with offset boom option)

5.6 Secondary Low Flow Electrical Proportional Control, provides low flow for rotation or tilt functions 461863 2,434$ (not for use with offset boom option)

6.0 BOOM AND ARM OPTIONS6.1 12' 4" Boom 481858 Standard6.2 12' 9" Offset boom 461025 5,041$ 6.3 5' 6" Arm (requires 6.1) 781172 Standard6.4 7' 2" Arm (requires 6.1) 481265 1,161$ 6.5 6' 10" Arm (requires 6.2) 481063 968$ 6.6 5' 9" Arm (requires 6.2) 481062 614$ 6.7 Hose Burst Check Valve 461559 1,572$

7.0 BUCKET/COUPLERS/TOOL OPTIONS7.1 Hydraulic Coupler 47603261 4,039$ 7.2 18" Heavy Duty Bucket (for 7.1) 84422902 1,141$ 7.3 24" Heavy Duty Bucket (for 7.1) 84422903 1,348$ 7.4 30" Heavy Duty Bucket (for 7.1) 84422906 1,495$ 7.5 36" Heavy Duty Bucket (for 7.1) 84422909 1,663$ 7.6 42" Heavy Duty Bucket (for 7.1) 84422911 1,825$ 7.7 42" Ditching Pin-on Bucket 84404122 1,220$ 7.8 48" Ditching Pin-on Bucket 84404123 1,270$ 7.10 18" Heavy Duty Pin-on Bucket 84422873 897$ 7.11 24" Heavy Duty Pin-on Bucket 84422885 1,055$ 7.12 30" Heavy Duty Pin-on Bucket 84422889 1,175$ 7.13 36" Heavy Duty Pin-on Bucket 84422894 1,306$ 7.14 42" Heavy Duty Pin-on Bucket 84422897 1,432$ 7.15 2 Tine Hydraulic Thumb Odd Teeth (for 7.7 - 7.14) 47609053 2,637$ 7.16 2 Tine Hydraulic Thumb Odd Teeth (for 7.2 - 7.6) 47609054 2,794$ 7.17 2 Tine Hydraulic Thumb Even Teeth (for 7.7 - 7.14) 47625914 2,637$ 7.18 2 Tine Hydraulic Thumb Even Teeth (for 7.2 - 7.6) 47625915 2,823$ 7.19 Fx55a FSP Hydraulic Breaker 6,575$ 7.20 Fx55a QT Quiet Technology Hydraulic Breaker 10,275$




August, 2017


7.21 F6 FSP Hydraulic Breaker 11,110$ 7.22 F6 QT Quiet Technology Hydraulic Breaker 11,995$ 7.23 F9 FSP Hydraulic Breaker 16,450$ 7.24 F9 QT Quiet Technology Hydraulic Breaker 17,675$ 7.25 HP65II FT 3,125$



10.0 EXTENDED WARRANTY OPTIONSCase standard warranty on Midi Excavators is for one year -1800 hours



Months/hours Coverage10.1 24/2000 - structural 257$ 10.2 36/3000 - structural 330$ 10.3 48/4000 - structural 405$ 10.4 60/5000 - structural 477$

10.5 24/2000 - power train only 199$ 10.6 36/3000 - power train only 532$ 10.7 48/4000 - power train only 867$ 10.8 60/5000 - power train only 1,668$





August, 2017


10.12 60/5000 - power train plus 2,428$

10.13 24/2000 - full machine 532$ 10.14 36/3000 - full machine 1,031$ 10.15 48/4000 - full machine 1,862$ 10.16 60/5000 - full machine 3,033$



Summer Weekly Rental Rate: 1,200$ Summer Monthly Rental Rate: 3,240$





August, 2017


12.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMDEDUCT cost per Used Hour from the original Contract Price 12$



10% Discount


25% Discount


0% DiscountPrice List Date and Number FAE USA Inc Price List 2017

10% Discount




Case CE Location




Atlas Copco Hydraulic Attachments1/1/17




August, 2017





August, 2017



2010

1.1 Make & Model Case CX80COperating Weight 18,938 lbEngine Make & Model Isuzu AP-4LE2XTier (Interim 4 or Final)? Tier 4 FinalHP at rated RPM (specify net or gross) 54 net hpNumber of speeds Two-speedMax travel speed, MPH 3.2 MPHDrawbar pull, lbs. 13,376 lbShoe width, in. 18" (450 mm)# of rollers on lower track Five per sideGround pressure, PSI 5.5 PSIGround clearance, in. 14" minimumOverall width of excavator 7' 7"Main pump(s) total flow, GPM 39 GPMSwing speed, RPM 10.4 RPMBoom length, ft-in 11' 6" Arm length, ft-in 5' 7"Arm breakout force, Normal, lb-ft 8,880 lbfMax dig depth, ft-in 13' 9"Reach at ground line, ft-in 22' 9"Dump height, ft-in 14' 10"Lift over end, 10’, lbs. 8,700 lbLift over end, max reach, lbs. 2,550 lbLift over side, 10’, lbs. 6,500 lbLift over side max reach, lbs. 1,950 lbBucket breakout force, normal lb-ft. 12,800 lbfTail swing radius, ft-in. 5' 6"Does excavator include bucket? NoIf so, descriptionWarranty Terms: hours/months/years 12 Month/1800 Hours Full Machine

24 Month/2000 Hour Engine

Price 82,775$


[email protected]


952-445-0365


Shakopee, MN 55379






August, 2017


2.0 OPERATOR ENVIRONMENT OPTIONS2.1 Air conditioner Standard2.2 Adjustable deluxe seat w/3" retractable seat belt Standard2.3 One touch accelerator - decelerator Standard2.4 Front window safety glass and sky light Standard2.5 Heater/defroster Standard2.6 Radio - AM-FM Standard2.7 Selector valve for control pattern Standard2.8 Rear View Camera 461504 389$

3.0 EXCAVATOR EXTERIOR AND POWERTRAIN OPTIONS3.1 7' 7" Hydraulically controlled dozer blade - front Standard3.2 Whelen strobe 625$ 3.3 FOPS top guard, level 2 481070 1,322$ 3.4 Front grill - vertical bars w/6" spacing 461024 1,515$ 3.5 Front screen - 2" by 2" mesh 161142 865$ 3.6 Refuel Pump 481257 845$

4.0 UNDERCARRIAGE OPTIONS4.1 18" shoes (3 bar grouser) 9560017 Standard4.2 24" shoes (3 bar grouser) (Dozer blade will not cover full track width) 9560002 311$ 4.3 18" Full rubber tracks 9560020 2,340$ 4.4 18" Bolt-on Rubber Track (rubber pads bolted on regular 18" track) 9560018 3,836$

5.0 HYDRAULICS OPTIONSPlumbing and actuation for auxiliary hydraulics

5.1 Hammer Circuit Electrical Proportional Control, Joystick activated, single directional flow 461865 2,764$ (recommended for hammer use)

5.2 Thumb Hydraulic controls, single pump, two-way flow, use for thumb control 461871 1,980$ 5.3 Hammer/High Flow Circuit, Electrical Proportional Control, Joystick Activated 461868 4,150$

single or dual directional flow.5.4 Secondary Low Flow Electrical Proportional Control, provides low flow for rotation or tilt functions 461863 2,434$

6.0 BOOM AND ARM OPTIONS




August, 2017


6.1 11' 6" Boom Standard6.2 5' 6" Arm 781172 Standard6.3 7' 2" Arm 481265 1,161$ 6.4 Hose Burst Check Valve 461559 2,782$

7.0 BUCKET/COUPLERS/TOOL OPTIONS7.1 Hydraulic Coupler 47603261 4,039$ 7.2 18" Heavy Duty Bucket (for 7.1) 84422902 1,141$ 7.3 24" Heavy Duty Bucket (for 7.1) 84422903 1,348$ 7.4 30" Heavy Duty Bucket (for 7.1) 84422906 1,495$ 7.5 36" Heavy Duty Bucket (for 7.1) 84422909 1,663$ 7.6 42" Heavy Duty Bucket (for 7.1) 84422911 1,825$ 7.7 42" Ditching Pin-on Bucket 84404122 1,220$ 7.8 48" Ditching Pin-on Bucket 84404123 1,270$ 7.10 18" Heavy Duty Pin-on Bucket 84422873 897$ 7.11 24" Heavy Duty Pin-on Bucket 84422885 1,055$ 7.12 30" Heavy Duty Pin-on Bucket 84422889 1,175$ 7.13 36" Heavy Duty Pin-on Bucket 84422894 1,306$ 7.14 42" Heavy Duty Pin-on Bucket 84422897 1,432$ 7.15 2 Tine Hydraulic Thumb Odd Teeth (for 7.7 - 7.14) 47609053 2,637$ 7.16 2 Tine Hydraulic Thumb Odd Teeth (for 7.2 - 7.6) 47609054 2,794$ 7.17 2 Tine Hydraulic Thumb Even Teeth (for 7.7 - 7.14) 47625914 2,637$ 7.18 2 Tine Hydraulic Thumb Even Teeth (for 7.2 - 7.6) 47625915 2,823$ 7.19 Fx55a FSP Hydraulic Breaker 6,575$ 7.20 Fx55a QT Quiet Technology Hydraulic Breaker 10,275$ 7.21 F6 FSP Hydraulic Breaker 11,110$ 7.22 F6 QT Quiet Technology Hydraulic Breaker 11,995$ 7.23 F9 FSP Hydraulic Breaker 16,450$ 7.24 F9 QT Quiet Technology Hydraulic Breaker 17,675$ 7.25 HP65II FT 3,125$


9.0 INSTALLATION: HOURLY RATE FOR ATTACHMENT INSTALLATIONS, ETC.:




August, 2017


(See Special Terms and Conditions) 125$

10.0 EXTENDED WARRANTY OPTIONSCase standard warranty on Midi Excavators is for one year -1800 hours



Months/hours Coverage10.1 24/2000 - structural 257$ 10.2 36/3000 - structural 330$ 10.3 48/4000 - structural 405$ 10.4 60/5000 - structural 477$

10.5 24/2000 - power train only 199$ 10.6 36/3000 - power train only 532$ 10.7 48/4000 - power train only 867$ 10.8 60/5000 - power train only 1,668$

10.9 24/2000 - power train plus 299$ 10.10 36/3000 - power train plus 800$ 10.11 48/4000 - power train plus 1,310$ 10.12 60/5000 - power train plus 2,428$

10.13 24/2000 - full machine 532$ 10.14 36/3000 - full machine 1,031$ 10.15 48/4000 - full machine 1,862$ 10.16 60/5000 - full machine 3,033$

11.0 NEW EQUIPMENT RENTAL PROGRAM




August, 2017


If rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.




If the new rental equipment is purchased and finance

12.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMDEDUCT cost per Used Hour from the original Contract Price 13$



10% Discount


25% Discount



10% Discount








August, 2017




Case CE Location





August, 2017

Titan MachineryCase CX130D of 116


2010

1.1 Make & Model Case CX130DOperating Weight 30,400 lbEngine Make & Model Isuzu AR-4JJ1XTier (Interim 4 or Final)? Tier 4 FinalHP at rated RPM (specify net or gross) 102 Net HPNumber of speeds Two-speedMax travel speed, MPH 3.5 MPHDrawbar pull, lbs. 26,100 lbfShoe width, in. 24" # of rollers on lower track Seven per sideGround pressure, PSI 5.4 PSIGround clearance, in. 17" minimumOverall width of excavator 8' 6"Main pump(s) total flow, GPM 68.2 GPMSwing speed, RPM 14.3 RPMBoom length, ft-in 15' 2"Arm length, ft-in 8' 2"Arm breakout force, Normal, lb-ft 14,800 lbfMax dig depth, ft-in 18' 3"Reach at ground line, ft-in 25' 10"Dump height, ft-in 21' 0"Lift over end, 10’, lbs. 18,450 lbLift over end, max reach, lbs. 2,700 lbLift over side, 10’, lbs. 11,700 lbLift over side max reach, lbs. 2,600 lbBucket breakout force, normal lb-ft. 21,400 lbfTail swing radius, ft-in. 7' 1"Does excavator include bucket? NoIf so, descriptionWarranty Terms: hours/months/years 3 yr 3,000hr factory warranty

Price 121,325$


[email protected]


952-445-0365


Shakopee, MN 55379






August, 2017

Titan MachineryCase CX130D Options of 116

2.0 OPERATOR ENVIRONMENT OPTIONS2.1 Air Suspension seat Standard2.2 Front window safety glass Standard2.3 Automatic Climate Control System ( heater & A/C ) Standard2.4 Radio - AM-FM w/dual rear mounted speakers Standard2.5 Sliding cockpit & pressurized cab Standard2.6 Selector valve for control pattern Standard2.7 Rain Deflector, not for use with front mesh or rock guards, 3.3, 3.4, 3.5 248$ 2.8 Sun Visor 461554 70$ 2.9 Rear View Camera Standard2.10 Case Max View Monitor 488055 1,243$ 2.11 Side View Camera 461560 456$ 2.12 LED Work Lights Package (2 front, 2 rear, 1 each side, and a sideview camera) 488135 2,800$

3.0 EXCAVATOR EXTERIOR AND POWERTRAIN OPTIONS3.1 Whelen strobe 625$ 3.2 FOPS top guard, level 2 481070 747$ 3.3 Front rock guard - vertical bars, one piece 461024 1,515$ 3.4 Front rock guard - two piece / upper and lower 781986 1,286$ 3.5 Front screen - 2" by 2" mesh 461142 865$ 3.6 Vandal guard 461552 375$ 3.7 Dozer Blade 7,546$ 3.8 Refuel Pump 481257 845$

4.0 UNDERCARRIAGE OPTIONS4.1 24" Shoes, steel, 3-bar 9560013 Standard4.2 28" Shoes, steel , 3-bar 9560003 812$ 4.3 20" Rubber link track (steel base coated with rubber) 9560052 6,590$ 4.4 Double Track Chain Guide 461542 475$

5.0 HYDRAULICS OPTIONS5.1 Automatic Power boost Standard

Plumbing and actuation for auxiliary hydraulics




August, 2017


5.2 Single Acting Aux Hydraulics - For use with hammers or vibratory compaction plate 461865 3,865$

5.3 Double acting, general purpose, trigger switch activated. 461871 3,257$ (Recommended for use with a thumb kit.)

5.4 Double acting, Joystick activated, single or double pump flow 461869 6,086$ (Provides single or dual pump bi-directional flow, Hammer or Thumb option)

5.5 Second Auxiliary Hydraulics, low flow (joystick operated, provides rotation or tilt for hydraulic 461863 3,785$ attachments such as shears and tilt buckets).

5.6 Free Swing (switch activated) 461568 Standard

6.0 BOOM AND ARM OPTIONS6.1 15' 2" Boom 481858 Standard6.2 8' 2" Arm 781174 Standard6.3 9' 10" Arm 781178 480$ 6.4 6' 10" Arm 461574 (283)$ 6.5 Hose Burst Check Valve (boom and arm) 481064 5,160$

7.0 BUCKET/COUPLERS/TOOL OPTIONS7.1 Hydraulic quick coupler ready (req if ordering Hyd Coupler) 781128 1,288$ 7.2 Multi-Fit S coupler Kit 47867959 3,390$ 7.3 24" Heavy Duty Bucket (for 7.1) 84404117 2,658$ 7.4 30" Heavy Duty Bucket (for 7.1) 84404118 2,950$ 7.5 36" Heavy Duty Bucket (for 7.1) 84404119 3,199$ 7.6 42" Heavy Duty Bucket (for 7.1) 84404121 3,348$ 7.7 48" Ditching Pin-on Bucket 84404113 1,950$ 7.8 60" Ditching Pin-on Bucket 84404115 2,213$ 7.9 24" Heavy Duty Pin-on Bucket 84404093 1,923$ 7.10 30" Heavy Duty Pin-on Bucket 84404095 2,005$ 7.11 36" Heavy Duty Pin-on Bucket 84404103 2,170$ 7.12 42" Heavy Duty Pin-on Bucket 84406310 2,440$ 7.13 24" Extra Heavy Duty Pin-on Bucket 84404105 2,060$ 7.14 30" Extra Heavy Duty Pin-on Bucket 84404108 2,286$




August, 2017


7.15 36" Extra Heavy Duty Pin-on Bucket 84404109 2,500$ 7.16 42" Extra Heavy Duty Pin-on Bucket 84404110 2,672$ 7.17 Hydraulic Main Pin Direct Link Thumb (2 Tine, Pin On Bucket) 47609058 4,284$ 7.18 Hydraulic Thumb Kit (4 Tine, Pin on Bucket) 47609059 4,535$ 7.19 Hydraulic Thumb Kit (3 Tine, Bucket & Coupler) 47609060 4,443$ 7.20 Hydraulic Thumb Kit (4 Tine, Bucket & Coupler) 47609061 4,756$ 7.21 Progressive Link Thumb Kit (2 Tine, Pin on Bucket) 47609095 5,384$ 7.22 Progressive Link Thumb Kit (2 Tine, Pin on Bucket) 47609096 5,635$ 7.23 Progressive Link Thumb Kit (3 Tine, Bucket & Coupler) 47609097 5,546$ 7.24 Progressive Link Thumb Kit (2 Tine, Bucket & Coupler) 47609097 5,857$ 7.25 F9 FSP Hydraulic Breaker 16,500$ 7.26 F9 QT Quiet Technology Hydraulic Breaker 17,675$ 7.27 FX125QTv Quiet Technology Hydraulic Breaker 21,600$ 7.28 HP135II FT 6,475$ 7.29 CW18III 4,900$ 7.30 CW24III 6,900$



10.0 EXTENDED WARRANTY OPTIONSCase standard warranty is for 3 years -3000 hours



Months/hours Coverage10.1 48/3000 - Power Train Only 309$ 10.2 48/4000 - Power Train Only 442$




August, 2017


10.3 60/4000 - Power Train Only 597$ 10.4 60/5000 - Power Train Only 778$

10.5 48/3000 - Major Components 594$ 10.6 48/4000 - Major Components 849$ 10.7 60/4000 - Major Components 1,148$ 10.8 60/5000 - Major Components 1,497$

10.9 48/3000 - Premier 793$ 10.10 48/4000 - Premier 1,133$ 10.11 60/4000 - Premier 1,531$ 10.12 60/5000 - Premier 1,995$




Percent (%) of Rental Fee applied to purchase price: 80% first 90 daysEXTENDED WARRANTY OPTIONS 75% thereafter





August, 2017





10% Discount


25% DiscountPrice List Date and Number


10% Discount




Case CE Location








August, 2017



2010

1.1 Make & Model Case CX145DOperating Weight 32,100 lbs.Engine Make & Model Isuzu AM-4JJ1XTier (Interim 4 or Final)? Tier 4 InterimHP at rated RPM (specify net or gross) 102 Net HPNumber of speeds Two-speedMax travel speed, MPH 3.5 MPHDrawbar pull, lbs. 26,100 lbShoe width, in. 24"# of rollers on lower track Seven Per sideGround pressure, PSI 5.2 PSIGround clearance, in. 17" minimumOverall width of excavator 8' 6"Main pump(s) total flow, GPM 68.2 GPMSwing speed, RPM 12.5 RPMBoom length, ft-in 15' 2"Arm length, ft-in 8' 2"Arm breakout force, Normal, lb-ft 14,800 lbfMax dig depth, ft-in 18' 1"Reach at ground line, ft-in 25' 8"Dump height, ft-in 22' 9"Lift over end, 10’, lbs. 19,250 lbLift over end, max reach, lbs. 2,450 lbLift over side, 10’, lbs. 12,200 lbLift over side max reach, lbs. 2,450 lbBucket breakout force, normal lb-ft. 21,400 lbfTail swing radius, ft-in. 5' 0"Does excavator include bucket? NoIf so, descriptionWarranty Terms: hours/months/years 3 yr 3,000hr factory warranty

Price 117,080$


[email protected]


952-445-0365


Shakopee, MN 55379






August, 2017


2.0 OPERATOR ENVIRONMENT OPTIONS2.1 Air Suspension seat Standard2.2 Front window safety glass Standard2.3 Automatic Climate Control System ( heater & A/C ) Standard2.4 Radio - AM-FM w/dual rear mounted speakers Standard2.5 Sliding cockpit & pressurized cab Standard2.6 Additional Hand Rail Standard2.7 Selector valve for control pattern (factory only) 461558 Standard2.8 Rain Deflector, not for use with front mesh or rock guards, 3.3, 3.4, 3.5 248$ 2.9 Sun Visor 461554 70$ 2.10 Rear View Camera Standard2.11 Case Max View Monitor 488055 1,243$ 2.12 Side View Camera 461560 Standard2.13 LED Work Lights Package (2 front, 2 rear, 1 each side, and a sideview camera) 488135 2,800$

3.0 EXCAVATOR EXTERIOR AND POWERTRAIN OPTIONS3.1 Whelen strobe 625$ 3.2 FOPS top guard, level 2 481070 747$ 3.3 Front rock guard - vertical bars, one piece 461024 1,515$ 3.4 Front rock guard - two piece / upper and lower 781986 1,286$ 3.5 Front screen - 2" by 2" mesh 461142 865$ 3.6 Vandal guard 461552 374$ 3.7 Dozer Blade 6,318$

4.0 UNDERCARRIAGE OPTIONS4.1 24" Shoes, steel, 3-bar 9560013 (1,009)$ 4.2 28" Shoes, steel , 3-bar 9560039 Standard4.3 20" Rubber link track 9560052 5,398$ 4.4 Double Track Chain Guide 461542 475$


Plumbing and actuation for auxiliary hydraulics5.2 Single acting, Joystick activated 461865 3,599$

(Provides single pump flow plumbing to end of arm and returnto tank through additional filter. Includes remote adjustable relief valve to match attachment pressure requirements)

5.3 Double acting, Joystick activated, single or double pump flow 461868 5,065$ (Provides single or dual pump bi-directional flow to end of arm. Includes plumbing and valving to operate single direction flow with return to tank through additional filter (included). Includes remoterelief valve for single direction operations. This kit allows the useof two different types of attachments on an excavator, such as a breaker and a grapple

5.4 Double acting, general purpose, trigger switch activated. 461871 3,004$




August, 2017


(Recommended for use with a thumb kit. Plumbing to the end of the boom, no hydraulics provided on the arm. Actuatedby trigger switches in the right and left hand controls. Rightcontrols one-way flow, left controls opposite flow. Righthand switch is the same switch that controls the boost. Switch in left console turns power boost and auxiliary hydraulics on and off.)

5.5 Proportional Multi Function w/Pressure Setting 461869 6,459$ (Provides single or dual pump bi-directional flow, Hammer or Thumb option)



6.0 BOOM AND ARM OPTIONS6.1 15' 6" Boom 481858 Standard6.2 8' 2" Arm 781174 Standard6.3 9' 10" Arm 781178 710$ 6.4 6' 10" Arm (for standard boom) 761574 375$ 6.5 Hose Burst Check Valve (boom and arm) 461064 5,650$

7.0 BUCKET/COUPLERS/TOOL OPTIONS7.1 48" Ditching Pin-on Bucket 84404113 1,951$ 7.2 60" Ditching Pin-on Bucket 84404115 2,213$ 7.3 24" Heavy Duty Pin-on Bucket 84404093 1,923$ 7.4 30" Heavy Duty Pin-on Bucket 84404095 2,004$ 7.5 36" Heavy Duty Pin-on Bucket 84404103 2,171$ 7.6 42" Heavy Duty Pin-on Bucket 84406310 2,439$ 7.7 24" Extra Heavy Duty Pin-on Bucket 84404105 2,060$ 7.8 30" Extra Heavy Duty Pin-on Bucket 84404108 2,286$ 7.9 36" Extra Heavy Duty Pin-on Bucket 84404109 2,503$ 7.10 42" Extra Heavy Duty Pin-on Bucket 84404110 2,672$ 7.11 F9 FSP Hydraulic Breaker 16,500$ 7.12 F9 QT Quiet Technology Hydraulic Breaker 17,675$ 7.13 FX125QTv Quiet Technology Hydraulic Breaker 21,600$ 7.14 HP135II FT 6,475$ 7.15 CW18III 4,900$ 7.16 CW24III 6,900$







August, 2017




Months/hours Coverage10.1 48/3000 - Power Train Only 309$ 10.2 48/4000 - Power Train Only 442$ 10.3 60/4000 - Power Train Only 597$ 10.4 60/5000 - Power Train Only 778$

10.5 48/3000 - Major Components 594$ 10.6 48/4000 - Major Components 849$ 10.7 60/4000 - Major Components 1,148$ 10.8 60/5000 - Major Components 1,497$





Percent (%) of Rental Fee applied to purchase price: 75% thereafter





August, 2017





10% Discount


25% Discount



10% Discount



DELIVERY STARTING POINT - City, State, Zip y

Case CE Location








August, 2017



2010

1.1 Make & Model Case CX160DOperating Weight 38,400 lbEngine Make & Model Isuzu AR-4JJ1XTier (Interim 4 or Final)? Tier 4 FinalHP at rated RPM (specify net or gross) 112 Net HPNumber of speeds Two-speedMax travel speed, MPH 3.4 MPHDrawbar pull, lbs. 36,100 lbShoe width, in. 24"# of rollers on lower track Seven per sideGround pressure, PSI 5.9 PSIGround clearance, in. 17" minimumOverall width of excavator 8' 6"Main pump(s) total flow, GPM 75.0 GPMSwing speed, RPM 11.5 RPMBoom length, ft-in 16' 11"Arm length, ft-in 8' 7"Arm breakout force, Normal, lb-ft 18,800 lbfMax dig depth, ft-in 19' 11"Reach at ground line, ft-in 29' 1"Dump height, ft-in 21' 8"Lift over end, 10’, lbs. 17,200 lbLift over end, max reach, lbs. 3,450 lbLift over side, 10’, lbs. 16,250 lbLift over side max reach, lbs. 3,350 lbBucket breakout force, normal lb-ft. 26,500 lbfTail swing radius, ft-in. 8' 1"Does excavator include bucket? NoIf so, descriptionWarranty Terms: hours/months/years 3 yr 3,000hr factory warranty

Price 145,355$


[email protected]


952-445-0365


Shakopee, MN 55379






August, 2017


2.0 OPERATOR ENVIRONMENT OPTIONS2.1 Air Suspension seat Standard2.2 Front window safety glass Standard2.3 Automatic Climate Control System ( heater & A/C ) Standard2.4 Radio - AM-FM w/dual rear mounted speakers Standard2.5 Sliding cockpit & pressurized cab Standard2.6 Selector valve for control pattern Standard2.7 Rain Deflector, not for use with front mesh or rock guards, 3.3, 3.4, 3.5 461555 245$ 2.8 Sun Visor 461554 70$ 2.9 Rear View Camera Standard2.10 Cae Max View Camera 488055 1,230$ 2.11 Side View Camera 461560 448$ 2.12 LED Work Lights Package (2 front, 2 rear, 1 each side, and a sideview camera) 488135 2,771$

3.0 EXCAVATOR EXTERIOR AND POWERTRAIN OPTIONS3.1 Whelen strobe 625$ 3.2 FOPS top guard, level 2 481070 739$ 3.3 Front rock guard - vertical bars, one piece 461024 1,499$ 3.4 Front rock guard - two piece / upper and lower 781986 1,273$ 3.5 Front screen - 2" by 2" mesh 461142 855$ 3.6 Vandal guard 461552 370$ 3.7 Refuel Pump 481257 835$

4.0 UNDERCARRIAGE OPTIONS4.1 24" Shoes, steel, 3-bar 9560013 Standard4.2 28" Shoes, steel , 3-bar 9560003 1,040$ 4.3 Triple Track Chain Guide 461143 725$


Plumbing and actuation for auxiliary hydraulics5.2 Single Acting Aux Hydraulics - For use with hammers or vibratory compaction plate 461865 4,099$




August, 2017






6.0 BOOM AND ARM OPTIONS6.1 16' 11" Boom 481858 Standard6.2 8' 7" Arm 781176 Standard6.3 9' 10" Arm 781178 839$ 6.4 Hose Burst Check Valve (boom and arm) 481064 5,105$

7.0 BUCKET/COUPLERS/TOOL OPTIONS7.1 Hydraulic quick coupler ready (req if ordering Hyd Coupler) 781128 1,274$ 7.2 Multi-Fit S coupler Kit 47867959 3,353$ 7.3 24" Heavy Duty Bucket (for 7.1) 84404117 2,629$ 7.4 30" Heavy Duty Bucket (for 7.1) 84404118 2,918$ 7.5 36" Heavy Duty Bucket (for 7.1) 84404119 3,165$ 7.6 42" Heavy Duty Bucket (for 7.1) 84404121 3,312$ 7.7 48" Ditching Pin-on Bucket 84404113 1,930$ 7.8 60" Ditching Pin-on Bucket 84404115 2,190$ 7.9 24" Heavy Duty Pin-on Bucket 84404093 1,902$ 7.10 30" Heavy Duty Pin-on Bucket 84404095 1,983$ 7.11 36" Heavy Duty Pin-on Bucket 84404103 2,148$ 7.12 42" Heavy Duty Pin-on Bucket 84406310 2,413$ 7.13 24" Extra Heavy Duty Pin-on Bucket 84404105 2,038$ 7.14 30" Extra Heavy Duty Pin-on Bucket 84404108 2,261$ 7.15 36" Extra Heavy Duty Pin-on Bucket 84404109 2,476$ 7.16 42" Extra Heavy Duty Pin-on Bucket 84404110 2,643$ 7.17 Hydraulic Main Pin Direct Link Thumb (2 Tine, Pin On Bucket) 47609058 4,238$




August, 2017


7.18 Hydraulic Thumb Kit (4 Tine, Pin on Bucket) 47609059 4,486$ 7.19 Hydraulic Thumb Kit (3 Tine, Bucket & Coupler) 47609060 4,395$ 7.20 Hydraulic Thumb Kit (4 Tine, Bucket & Coupler) 47609061 4,705$ 7.21 Progressive Link Thumb Kit (2 Tine, Pin on Bucket) 47609095 5,326$ 7.22 Progressive Link Thumb Kit (2 Tine, Pin on Bucket) 47609096 5,574$ 7.23 Progressive Link Thumb Kit (3 Tine, Bucket & Coupler) 47609097 5,486$ 7.24 Progressive Link Thumb Kit (2 Tine, Bucket & Coupler) 47609097 5,794$ 7.25 F9 FSP Hydraulic Breaker 16,500$ 7.26 F9 QT Quiet Technology Hydraulic Breaker 17,675$ 7.27 FX125QTv Quiet Technology Hydraulic Breaker 21,600$ 7.28 HP135II FT 6,475$ 7.29 CW18III 4,900$ 7.30 CW24III 6,900$






Months/hours Coverage10.1 48/3000 - Power Train Only 382$ 10.2 48/4000 - Power Train Only 545$ 10.3 60/4000 - Power Train Only 716$ 10.4 60/5000 - Power Train Only 921$




August, 2017


10.5 48/3000 - Major Components 733$ 10.6 48/4000 - Major Components 1,046$ 10.7 60/4000 - Major Components 1,377$ 10.8 60/5000 - Major Components 1,772$













August, 2017


10% Discount


25% Discount



10% Discount




Case CE Location








August, 2017



2010

1.1 Make & Model Case CX210DOperating Weight 48,900 lbEngine Make & Model Isuzu AR-4HK1XTier (Interim 4 or Final)? Tier 4 InterimHP at rated RPM (specify net or gross) 160 Net HPNumber of speeds Two-speedMax travel speed, MPH 3.5 MPHDrawbar pull, lbs. 42,264 lbShoe width, in. 31.5" # of rollers on lower track Eight per sideGround pressure, PSI 4.9 PSIGround clearance, in. 16"Overall width of excavator 10' 6"Main pump(s) total flow, GPM 111.4 GPMSwing speed, RPM 11.5 RPMBoom length, ft-in 18' 8"Arm length, ft-in 9' 8"Arm breakout force, Normal, lb-ft 25,179 lbfMax dig depth, ft-in 21' 7"Reach at ground line, ft-in 31' 11"Dump height, ft-in 22' 3"Lift over end, 10’, lbs. 18,950 lbLift over end, max reach, lbs. 5,200 lbLift over side, 10’, lbs. 18,950 lbLift over side max reach, lbs. 4,850 lbBucket breakout force, normal lb-ft. 34,621 lbfTail swing radius, ft-in. 9' 1"Does excavator include bucket? NoIf so, descriptionWarranty Terms: hours/months/years 3 yr 3,000hr factory warranty

Price 167,375$


[email protected]


952-445-0365


Shakopee, MN 55379






August, 2017


2.0 OPERATOR ENVIRONMENT OPTIONS2.1 Air Suspension seat Standard2.2 Front window safety glass Standard2.3 Automatic Climate Control System ( heater & A/C ) Standard2.4 Radio - AM-FM w/dual rear mounted speakers Standard2.5 Sliding cockpit & pressurized cab Standard2.6 Selector valve for control pattern Standard2.7 Rain Deflector, not for use with front mesh or rock guards, 3.3, 3.4, 3.5 461555 248$ 2.8 Sun Visor 461554 71$ 2.9 Rear View Camera Standard2.10 Case Max View Monitor 488055 1,243$ 2.11 Side View Camera 461560 453$ 2.12 LED Work Lights Package (2 front, 2 rear, 1 each side, and a sideview camera) 488135 2,801$

3.0 EXCAVATOR EXTERIOR AND POWERTRAIN OPTIONS3.1 Whelen strobe 625$ 3.2 FOPS top guard, level 2 481070 747$ 3.3 Front rock guard - vertical bars, one piece 461024 1,515$ 3.4 Front rock guard - two piece / upper and lower 781986 1,286$ 3.5 Front screen - 2" by 2" mesh 461142 865$ 3.6 Vandal guard 461552 374$ 3.7 High Ambient Cooling Package 481027 329$ 3.8 Refuel Pump 481257 845$ 3.9 Pre-Cleaner Cyclone 488031 306$

4.0 UNDERCARRIAGE OPTIONS4.1 32" Shoes (800 mm), steel, 3-bar 9560005 Standard4.2 28" Shoes (700 mm), steel, 3-bar 9560003 (229)$ 4.3 24" Shoes (600 mm), steel, 3-bar 9560013 565$ 4.4 36" Shoes (900 mm), steel, 3-bar 9560007 950$ 4.5 24" Rubber link track (steel base coated with rubber) 9560055 7,913$ 4.6 Triple Track Chain Guide 461143 733$

5.0 HYDRAULICS OPTIONS




August, 2017


5.1 Automatic Power boost Standard






6.0 BOOM AND ARM OPTIONS6.1 18' 8" Boom 481858 Standard6.2 9' 8" Arm 481268 Standard6.3 7' 10" Arm 461501 (353)$ 6.4 Hose Burst Check Valve (boom and arm) 481064 5,160$

7.0 BUCKET/COUPLERS/TOOL OPTIONS7.1 Hydraulic quick coupler ready (req if ordering Hyd Coupler) 781128 1,427$ 7.2 Multi-Fit S coupler Kit 47855901 3,836$ 7.3 24" Heavy Duty Bucket (for 7.1) 84404187 3,534$ 7.4 30" Heavy Duty Bucket (for 7.1) 84404188 3,886$ 7.5 36" Heavy Duty Bucket (for 7.1) 84404189 4,276$ 7.6 42" Heavy Duty Bucket (for 7.1) 84404190 4,704$ 7.7 48" Heavy Duty Bucket (for 7.1) 84404191 4,971$ 7.8 60" Ditching Pin-on Bucket 84404185 2,330$ 7.9 72" Ditching Pin-on Bucket 84404186 2,525$ 7.10 24" Heavy Duty Pin-on Bucket 84404166 2,575$ 7.11 30" Heavy Duty Pin-on Bucket 84404167 2,882$ 7.12 36" Heavy Duty Pin-on Bucket 84404168 3,145$




August, 2017


7.13 42" Heavy Duty Pin-on Bucket 84404169 3,390$ 7.14 24" Heavy Duty High Capacity Bucket 84404170 2,785$ 7.15 30" Heavy Duty High Capacity Bucket 84404175 3,075$ 7.16 36" Heavy Duty High Capacity Bucket 84404178 3,400$ 7.17 42" Heavy Duty High Capacity Bucket 84404179 3,570$ 7.18 48" Heavy Duty High Capacity Bucket 84404180 3,900$ 7.19 24" Severe Duty Bucket 84404181 3,480$ 7.20 30" Severe Duty Bucket 84404182 3,900$ 7.21 36" Severe Duty Bucket 84404183 4,366$ 7.22 42" Severe Duty Bucket 84404184 4,518$ 7.23 Hydraulic Main Pin Direct Link Thumb (3 Tine, Pin On Bucket) 47609071 5,611$ 7.24 Hydraulic Thumb Kit (4 Tine, Pin on Bucket) 47609072 5,927$ 7.25 Hydraulic Thumb Kit (3 Tine, Bucket & Coupler) 47609073 5,851$ 7.26 Hydraulic Thumb Kit (4 Tine, Bucket & Coupler) 47609074 6,243$ 7.27 Progressive Link Thumb Kit (3 Tine, Pin on Bucket) 47609109 7,288$ 7.28 Progressive Link Thumb Kit (4 Tine, Pin on Bucket) 47609110 7,288$ 7.29 Progressive Link Thumb Kit (4 Tine, Bucket & Coupler) 47609111 7,212$ 7.30 Progressive Link Thumb Kit (3 Tine, Bucket & Coupler) 47609112 7,604$ 7.31 FX175 QTv Hydraulic Breaker 31,500$ 7.32 FX275 QTv Hydraulic Breaker 46,775$ 7.33 HP210II FT 13,450$ 7.34 CW24III 6,900$ 7.35 CW36III 9,995$




Case Warranty covers the CASE machine only.Protection Plan must be purchased with-in first 90 days or add 15% additional




August, 2017


during base warranty.Mfg's standard warranty is applicable to non-CASE equipment.


Months/hours Coverage10.1 48/3000 - Power Train Only 530$ 10.2 48/4000 - Power Train Only 756$ 10.3 60/4000 - Power Train Only 913$ 10.4 60/5000 - Power Train Only 1,335$

10.5 48/3000 - Major Components 1,018$ 10.6 48/4000 - Major Components 1,453$ 10.7 60/4000 - Major Components 1,755$ 10.8 60/5000 - Major Components 2,567$

10.9 48/3000 - Premier 1,356$ 10.10 48/4000 - Premier 1,937$ 10.11 60/4000 - Premier 2,340$ 10.12 60/5000 - Premier 3,423$





If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,




August, 2017


state the actual interest rate here: ________________




10% Discount


25% Discount



10% Discount




Case CE Location








August, 2017





August, 2017

Titan MachineryCase CX210D Narrow of 116


2010

1.1 Make & Model Case CX210D NarrowOperating Weight 48,100 lbEngine Make & Model Isuzu AR-4HK1XTier (Interim 4 or Final)? Tier 4 InterimHP at rated RPM (specify net or gross) 160 Net HPNumber of speeds Two-speedMax travel speed, MPH 3.5 MPHDrawbar pull, lbs. 42,264 lbShoe width, in. 24" # of rollers on lower track Eight per sideGround pressure, PSI 4.9 PSIGround clearance, in. 16"Overall width of excavator 8' 6"Main pump(s) total flow, GPM 111.4 GPMSwing speed, RPM 11.5 RPMBoom length, ft-in 18' 8"Arm length, ft-in 9' 8" Arm breakout force, Normal, lb-ft 25,100 lbfMax dig depth, ft-in 21' 2"Reach at ground line, ft-in 31' 11"Dump height, ft-in 22' 5"Lift over end, 10’, lbs. 18,409 lbLift over end, max reach, lbs. 5,181 lbLift over side, 10’, lbs. 18,409 lbLift over side max reach, lbs. 4,057 lbBucket breakout force, normal lb-ft. 34,600 lbfTail swing radius, ft-in. 9' 1"Does excavator include bucket? NoIf so, descriptionWarranty Terms: hours/months/years 3 yr 3,000hr factory warranty

Price 166,120$


[email protected]


952-445-0365


Shakopee, MN 55379






August, 2017

Titan MachineryCase CX210D Narrow Options of 116



4.0 UNDERCARRIAGE OPTIONS4.1 24" Shoes (600 mm), steel, 3-bar 9560013 565$ 4.2 24" Rubber link track (steel base coated with rubber) 9560055 7,913$ 4.3 Triple Track Chain Guide 461143 733$


Plumbing and actuation for auxiliary hydraulics




August, 2017


5.2 Single Acting Aux Hydraulics - For use with hammers or vibratory compaction plate 461865 4,843$





6.0 BOOM AND ARM OPTIONS6.1 18' 8" Boom 481858 Standard6.2 9' 8" Arm 481268 Standard6.3 7' 10" Arm 461501 (353)$ 6.4 Hose Burst Check Valve (boom and arm) 481064 5,160$

7.0 BUCKET/COUPLERS/TOOL OPTIONS7.1 Hydraulic quick coupler ready (req if ordering Hyd Coupler) 781128 1,427$ 7.2 Multi-Fit S coupler Kit 47855901 3,836$ 7.3 24" Heavy Duty Bucket (for 7.1) 84404187 3,534$ 7.4 30" Heavy Duty Bucket (for 7.1) 84404188 3,886$ 7.5 36" Heavy Duty Bucket (for 7.1) 84404189 4,276$ 7.6 42" Heavy Duty Bucket (for 7.1) 84404190 4,704$ 7.7 48" Heavy Duty Bucket (for 7.1) 84404191 4,971$ 7.8 60" Ditching Pin-on Bucket 84404185 2,361$ 7.9 72" Ditching Pin-on Bucket 84404186 2,557$ 7.10 24" Heavy Duty Pin-on Bucket 84404166 2,607$ 7.11 30" Heavy Duty Pin-on Bucket 84404167 2,919$ 7.12 36" Heavy Duty Pin-on Bucket 84404168 3,185$ 7.13 42" Heavy Duty Pin-on Bucket 84404169 3,434$ 7.14 24" Heavy Duty High Capacity Bucket 84404170 2,819$




August, 2017


7.15 30" Heavy Duty High Capacity Bucket 84404175 3,114$ 7.16 36" Heavy Duty High Capacity Bucket 84404178 3,442$ 7.17 42" Heavy Duty High Capacity Bucket 84404179 3,615$ 7.18 48" Heavy Duty High Capacity Bucket 84404180 3,950$ 7.19 24" Severe Duty Bucket 84404181 3,524$ 7.20 30" Severe Duty Bucket 84404182 3,948$ 7.21 36" Severe Duty Bucket 84404183 4,422$ 7.22 42" Severe Duty Bucket 84404184 4,575$ 7.23 Hydraulic Main Pin Direct Link Thumb (3 Tine, Pin On Bucket) 47609071 5,611$ 7.24 Hydraulic Thumb Kit (4 Tine, Pin on Bucket) 47609072 5,927$ 7.25 Hydraulic Thumb Kit (3 Tine, Bucket & Coupler) 47609073 5,851$ 7.26 Hydraulic Thumb Kit (4 Tine, Bucket & Coupler) 47609074 6,243$ 7.27 Progressive Link Thumb Kit (3 Tine, Pin on Bucket) 47609109 7,288$ 7.28 Progressive Link Thumb Kit (4 Tine, Pin on Bucket) 47609110 7,288$ 7.29 Progressive Link Thumb Kit (4 Tine, Bucket & Coupler) 47609111 7,212$ 7.30 Progressive Link Thumb Kit (3 Tine, Bucket & Coupler) 47609112 7,604$ 7.31 FX175 QTv Hydraulic Breaker 31,500$ 7.32 FX275 QTv Hydraulic Breaker 46,775$ 7.33 HP210II FT 13,450$ 7.34 CW24III 6,900$ 7.35 CW36III 9,995$








August, 2017














August, 2017





10% Discount


25% Discount



10% Discount




Case CE Location








August, 2017

Titan MachineryCase CX210D Long Reach of 116


2010

1.1 Make & Model Case CX210D Long ReachOperating Weight 51,900 lbEngine Make & Model Isuzu AR-4HK1XTier (Interim 4 or Final)? Tier 4 InterimHP at rated RPM (specify net or gross) 160 Net HPNumber of speeds Two-speedMax travel speed, MPH 3.5 MPHDrawbar pull, lbs. 42,300 lbShoe width, in. 31.5" # of rollers on lower track Eight per sideGround pressure, PSI 4.9 PSIGround clearance, in. 16"Overall width of excavator 8' 6"Main pump(s) total flow, GPM 111.4 GPMSwing speed, RPM 11.5 RPMBoom length, ft-in 28' 5"Arm length, ft-in 21'Arm breakout force, Normal, lb-ft 10,300 lbMax dig depth, ft-in 39' 4"Reach at ground line, ft-in 50' 9"Dump height, ft-in 35' 2"Lift over end, 10’, lbs. 5,115 lbLift over end, max reach, lbs. 2,205 lbLift over side, 10’, lbs. 5,115 lbLift over side max reach, lbs. 2,205 lbBucket breakout force, normal lb-ft. 14,600 lbTail swing radius, ft-in. 9' 1"Does excavator include bucket? NoIf so, descriptionWarranty Terms: hours/months/years 3 yr 3,000hr factory warranty

Price 183,165$


[email protected]


952-445-0365


Shakopee, MN 55379






August, 2017

Titan MachineryCase CX210D Long Reach Options of 116



4.0 UNDERCARRIAGE OPTIONS4.1 31.5" Shoes (800 mm), steel, 3-bar 9560005 Standard4.2 35.4" Shoes (900 mm), steel, 3-bar 9560007 950$ 4.3 Triple Track Chain Guide 461143 733$






August, 2017



6.0 BOOM AND ARM OPTIONS6.1 28' 7" Boom 461029 Standard6.2 21'0" Arm 481248 Standard6.3 Hose Burst Check Valve (boom and arm) 481064 5,160$

7.0 BUCKET/COUPLERS/TOOL OPTIONS7.1 48" Ditching Bucket 84404113 1,951$ 7.2 60" Ditching Bucket 84404115 2,213$ 7.3 Hydraulic Main Pin Direct Link Thumb (2 Tine, Pin On Bucket) 47609058 4,284$ 7.4 Hydraulic Thumb Kit (3 Tine, Pin on Bucket) 47609059 4,535$ 7.5 Hydraulic Thumb Kit (3 Tine, Bucket & Coupler) 47609060 4,443$ 7.6 Hydraulic Thumb Kit (4 Tine, Bucket & Coupler) 47609061 4,756$










August, 2017



10.9 48/3000 - Premier 1,356$




August, 2017


10.10 48/4000 - Premier 1,937$ 10.11 60/4000 - Premier 2,340$ 10.12 60/5000 - Premier 3,423$









10% Discount


25% Discount


Case Excavator Attachments




August, 2017





Case CE Location


2/20/2017




August, 2017



2010

1.1 Make & Model Case CX245DOperating Weight 56,900 lbEngine Make & Model Isuzu 4HK1XTier (Interim 4 or Final)? Tier 4 InterimHP at rated RPM (specify net or gross) 160 Net HPNumber of speeds Two-speedMax travel speed, MPH 3.1 MPHDrawbar pull, lbs. 45,000 lbShoe width, in. 32" # of rollers on lower track Eight per sideGround pressure, PSI 5.8 PSIGround clearance, in. 17"Overall width of excavator 10' 6"Main pump(s) total flow, GPM 110.4 GPMSwing speed, RPM 11.5 RPMBoom length, ft-in 18' 8"Arm length, ft-in 7' 10"Arm breakout force, Normal, lb-ft 30 ,000 lbfMax dig depth, ft-in 20' 1"Reach at ground line, ft-in 30' 9"Dump height, ft-in 25' 0"Lift over end, 10’, lbs. 17,750 lbLift over end, max reach, lbs. 7,550 lbLift over side, 10’, lbs. 17,750 lbLift over side max reach, lbs. 5,650 lbBucket breakout force, normal lb-ft. 34,600 lbfTail swing radius, ft-in. 5' 8"Does excavator include bucket? NoIf so, descriptionWarranty Terms: hours/months/years 3 yr 3,000hr factory warranty

Price 176,380$


[email protected]


952-445-0365


Shakopee, MN 55379






August, 2017


2.0 OPERATOR ENVIRONMENT OPTIONS2.1 Air Suspension seat Standard2.2 Front window safety glass Standard2.3 Automatic Climate Control System ( heater & A/C ) Standard2.4 Radio - AM-FM w/dual rear mounted speakers Standard2.5 Sliding cockpit & pressurized cab Standard2.6 Selector valve for control pattern (factory only) 537$ 2.7 Rain Deflector, not for use with front mesh or rock guards, 3.3, 3.4, 3.5 248$ 2.8 Sun Visor 461554 71$ 2.9 Rear View Camera Standard2.10 Cae Max View Monitor 488055 1,243$ 2.11 Side View Camera 453$ 2.12 Additional Hand Rail Standard2.13 LED Work Lights Package (2 front, 2 rear, 1 each side, and a sideview camera) 488135 2,801$

3.0 EXCAVATOR EXTERIOR AND POWERTRAIN OPTIONS3.1 Whelen strobe 590$ 3.2 FOPS top guard, level 2 481070 747$ 3.3 Front rock guard - vertical bars, one piece 461024 1,515$ 3.4 Front rock guard - two piece / upper and lower 781986 1,286$ 3.5 Front screen - 2" by 2" mesh 461142 865$ 3.6 Vandal guard 461552 375$ 3.7 Dozer Blade 16,416$ 3.8 Refuel Pump 845$

4.0 UNDERCARRIAGE OPTIONS4.1 24" Shoes, steel, 3-bar 9560013 (1,009)$ 4.2 28" Shoes, steel, 3-bar 9560039 (116)$ 4.3 32" Shoes, steel, 3-bar 9560046 Standard4.4 36" Shoes, steel, 3-bar 9560007 950$ 4.5 24" Rubber link track 9560055 7,903$ 4.6 Triple Track Chain Guide 461143 1,380$

5.0 HYDRAULICS OPTIONS




August, 2017


5.1 Automatic Power boost Standard

Plumbing and actuation for auxiliary hydraulics5.2 Hammer Circuit, Joystick activated 461865 4,408$

(Provides single pump flow plumbing to end of arm and returnto tank through additional filter. Includes remote adjustable relief valve to match attachment pressure requirements)

5.3 Double acting, Joystick activated, single or double pump flow 461869 6,715$ (Provides single or dual pump bi-directional flow to end of arm. Includes plumbing and valving to operate single direction flow with return to tank through additional filter (included). Includes remoterelief valve for single direction operations. This kit allows the useof two different types of attachments on an excavator, such as a breaker and a grapple

5.4 Double acting, general purpose, trigger switch activated. 461871 3,442$ (Recommended for use with a thumb kit. Plumbing to the end of the boom, no hydraulics provided on the arm. Actuatedby trigger switches in the right and left hand controls. Rightcontrols one-way flow, left controls opposite flow. Righthand switch is the same switch that controls the boost. Switch in left console turns power boost and auxiliary hydraulics on and off.)

5.5 Second Auxiliary Hydraulics, low flow (joystick operated, provides rotation or tilt for hydraulic 461863 3,640$ attachments such as shears and tilt buckets).attachments such as shears and tilt buckets).

5.6 Hydraulic Quick Coupler Ready 781128 1,502$


6.0 BOOM AND ARM OPTIONS6.1 18' 8" Boom 481858 Standard6.2 9' 8" Arm 481268 Standard




August, 2017


6.3 7' 10" Arm 461501 (178)$ 6.4 Hose Burst Check Valve (boom and arm) 481064 5,652$

7.0 BUCKET/COUPLERS/TOOL OPTIONS7.1 Hydraulic Coupler 5,622$ 7.2 24" Heavy Duty Bucket (for 7.1) 84404187 3,534$ 7.3 30" Heavy Duty Bucket (for 7.1) 84404188 3,886$ 7.4 36" Heavy Duty Bucket (for 7.1) 84404189 4,276$ 7.5 42" Heavy Duty Bucket (for 7.1) 84404190 4,704$ 7.6 48" Heavy Duty Bucket (for 7.1) 84404191 4,971$ 7.7 60" Ditching Pin-on Bucket 84404185 2,361$ 7.8 72" Ditching Pin-on Bucket 84404186 2,557$ 7.9 24" Heavy Duty Pin-on Bucket 84404166 2,607$ 7.10 30" Heavy Duty Pin-on Bucket 84404167 2,919$ 7.11 36" Heavy Duty Pin-on Bucket 84404168 3,185$ 7.12 42" Heavy Duty Pin-on Bucket 84404169 3,434$ 7.13 24" Heavy Duty High Capacity Bucket 84404170 2,819$ 7.14 30" Heavy Duty High Capacity Bucket 84404175 3,114$ 7.15 36" Heavy Duty High Capacity Bucket 84404178 3,442$ 7.16 42" Heavy Duty High Capacity Bucket 84404179 3,615$ 7.17 48" Heavy Duty High Capacity Bucket 84404180 3,950$ 7.18 24" Severe Duty Bucket 84404181 3,524$ 7.19 30" Severe Duty Bucket 84404182 3,948$ 7.20 36" Severe Duty Bucket 84404183 4,422$ 7.21 42" Severe Duty Bucket 84404184 4,575$ 7.22 Hydraulic Main Pin Direct Link Thumb (3 Tine, Pin On Bucket) 47609071 5,611$ 7.23 Hydraulic Thumb Kit (4 Tine, Pin on Bucket) 47609072 5,927$ 7.24 Hydraulic Thumb Kit (3 Tine, Bucket & Coupler) 47609073 5,851$ 7.25 Hydraulic Thumb Kit (4 Tine, Bucket & Coupler) 47609074 6,243$ 7.26 FX175 QTv Hydraulic Breaker 31,500$ 7.27 FX275 QTv Hydraulic Breaker 46,775$ 7.28 HP210II FT 13,450$ 7.29 CW24III 6,900$ 7.30 CW36III 9,995$




August, 2017


8.0 COMPLETE SET OF OEM AIR AND FLUID FILTERS 1,000$







10.9 48/3000 - Premier 1,356$




August, 2017











10% Discount


25% Discount






August, 2017




10% Discount




Case CE Location


2/20/2017





August, 2017



2010

1.1 Make & Model Case CX250DOperating Weight 56,909 lbEngine Make & Model Isuzu AZ-4H51XTier (Interim 4 or Final)? Tier 4 FinalHP at rated RPM (specify net or gross) 177 Net HPNumber of speeds Two-speedMax travel speed, MPH 3.4 MPHDrawbar pull, lbs. 44,962 lbfShoe width, in. 32" # of rollers on lower track Nine per sideGround pressure, PSI 5.5 PSIGround clearance, in. 17"Overall width of excavator 11' 1"Main pump(s) total flow, GPM 123.6 GPMSwing speed, RPM 10.6 RPMBoom length, ft-in 19' 2"Arm length, ft-in 9' 10"Arm breakout force, Normal, lb-ft 29,225 lbfMax dig depth, ft-in 22' 8"Reach at ground line, ft-in 33' 2"Dump height, ft-in 22' 2"Lift over end, 10’, lbs. 21,350 lbLift over end, max reach, lbs. 5,200 lbLift over side, 10’, lbs. 21,350 lbLift over side max reach, lbs. 5,200 lbBucket breakout force, normal lb-ft. 39,566 lbfTail swing radius, ft-in. 9' 8"Does excavator include bucket? NoIf so, descriptionWarranty Terms: hours/months/years 3 yr 3,000hr factory warranty

Price 217,410$


[email protected]


952-445-0365


Shakopee, MN 55379






August, 2017




4.0 UNDERCARRIAGE OPTIONS4.1 32" Shoes (800 mm), steel, 3-bar 9560005 Standard4.2 28" Shoes (700 mm), steel, 3-bar 9560003 (370)$ 4.3 24" Shoes (600 mm), steel, 3-bar 9560013 (752)$ 4.4 35.4" Shoes (900 mm), steel, 3-bar 9560007 898$ 4.5 Triple Track Chain Guide 461143 733$





August, 2017







6.0 BOOM AND ARM OPTIONS6.1 19' 2" Boom 481858 Standard6.2 9' 10" Arm 781178 Standard6.3 11' 6" Arm 781149 848$ 6.4 8' 2" Arm 461548 150$ 6.5 Hose Burst Check Valve (boom and arm) 481064 5,160$

7.0 BUCKET/COUPLERS/TOOL OPTIONS7.1 Hydraulic quick coupler ready (req if ordering Hyd Coupler) 781127 1,484$ 7.2 Multi-Fit S coupler Kit 47848464 5,420$ 7.3 36" Heavy Duty Bucket (for 7.1) 84404245 4,640$ 7.4 42" Heavy Duty Bucket (for 7.1) 84404246 4,950$ 7.5 48" Heavy Duty Bucket (for 7.1) 84404249 5,423$ 7.6 54" Heavy Duty Bucket (for 7.1) 84404251 5,869$ 7.7 60" Ditching Pin-on Bucket 84404242 3,300$ 7.8 72" Ditching Pin-on Bucket 84404244 3,520$ 7.9 36" Heavy Duty Pin-on Bucket 84404217 3,690$ 7.10 42" Heavy Duty Pin-on Bucket 84404219 4,060$ 7.11 48" Heavy Duty Pin-on Bucket 84404220 4,246$ 7.12 36" Extra Heavy Duty Bucket 84404224 3,980$




August, 2017


7.13 42" Extra Heavy Duty Bucket 84404228 4,378$ 7.14 48" Extra Heavy Duty Bucket 84404230 4,633$ 7.15 54" Extra Heavy Duty Bucket 84404232 4,850$ 7.16 36" Severe Duty Bucket 84404234 4,755$ 7.17 42" Severe Duty Bucket 84404237 5,232$ 7.18 48" Severe Duty Bucket 84404240 5,754$ 7.19 Hydraulic Main Pin Direct Link Thumb (3 Tine, Pin On Bucket) 47609075 5,959$ 7.20 Hydraulic Thumb Kit (4 Tine, Pin on Bucket) 47609076 6,274$ 7.21 Hydraulic Thumb Kit (3 Tine, Bucket & Coupler) 47609077 6,221$ 7.22 Hydraulic Thumb Kit (4 Tine, Bucket & Coupler) 47609078 6,623$ 7.23 Progressive Link Thumb Kit (3 Tine, Pin on Bucket) 47609115 7,680$ 7.24 Progressive Link Thumb Kit (4 Tine, Pin on Bucket) 47609116 7,996$ 7.25 Progressive Link Thumb Kit (3 Tine, Bucket & Coupler) 47609117 7,943$ 7.26 Progressive Link Thumb Kit (4 Tine, Bucket & Coupler) 47609118 8,339$ 7.27 FX275 QT Hydraulic Breaker 46,775$ 7.28 HP210II FT 13,450$ 7.29 CW36III 9,995$






Months/hours Coverage




August, 2017


10.1 48/3000 - Power Train Only 530$ 10.2 48/4000 - Power Train Only 756$ 10.3 60/4000 - Power Train Only 913$ 10.4 60/5000 - Power Train Only 1,335$







If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,




August, 2017


state the actual interest rate here: ________________




10% Discount


25% Discount



10% Discount




Case CE Location








August, 2017

Titan MachineryCase CX250D Long Reach of 116


2010

1.1 Make & Model Case CX250D Long ReachOperating Weight 63,523 lbEngine Make & Model Isuzu AQ-4HK1XTier (Interim 4 or Final)? Tier 4 FinalHP at rated RPM (specify net or gross) 177 Net HPNumber of speeds Two-speedMax travel speed, MPH 3.4 MPHDrawbar pull, lbs. 44,962 lbfShoe width, in. 32" # of rollers on lower track Nine per sideGround pressure, PSI 6.2 PSIGround clearance, in. 17"Overall width of excavator 11' 1"Main pump(s) total flow, GPM 123.6 GPMSwing speed, RPM 10.6 RPMBoom length, ft-in 33' 10"Arm length, ft-in 26' 3"Arm breakout force, Normal, lb-ft 9,060 lbMax dig depth, ft-in 47' 9"Reach at ground line, ft-in 49' 9"Dump height, ft-in 38' 8"Lift over end, 10’, lbs. 3,400 lbLift over end, max reach, lbs. 2,850 lbLift over side, 10’, lbs. 3,400 lbLift over side max reach, lbs. 2,850 lbBucket breakout force, normal lb-ft. 17,310 lbTail swing radius, ft-in. 9' 8"Does excavator include bucket? NoIf so, descriptionWarranty Terms: hours/months/years 3 yr 3,000hr factory warranty

Price 242,250$


[email protected]


952-445-0365


Shakopee, MN 55379






August, 2017




4.0 UNDERCARRIAGE OPTIONS4.1 31.5" Shoes (800 mm), steel, 3-bar 9560005 Standard4.2 Triple Track Chain Guide 488031 733$






August, 2017


5.3 Free Swing (switch activated) Standard

6.0 BOOM AND ARM OPTIONS6.1 33' 10" Boom 461029 Standard6.2 26' 3" Arm 481238 Standard6.3 Hose Burst Check Valve (boom and arm) 481064 5,160$

7.0 BUCKET/COUPLERS/TOOL OPTIONS7.1 48" Ditching Bucket 84404113 1,950$ 7.2 60" Ditching Bucket 84404115 2,215$ 7.3 Hydraulic Main Pin Direct Link Thumb (2 Tine, Pin On Bucket) 47609058 4,284$ 7.4 Hydraulic Thumb Kit (3 Tine, Pin on Bucket) 47609059 4,535$ 7.5 Hydraulic Thumb Kit (3 Tine, Bucket & Coupler) 47609060 4,443$ 7.6 Hydraulic Thumb Kit (4 Tine, Bucket & Coupler) 47609061 4,756$






Months/hours Coverage10.1 48/3000 - Power Train Only 530$ 10.2 48/4000 - Power Train Only 756$ 10.3 60/4000 - Power Train Only 913$




August, 2017


10.4 60/5000 - Power Train Only 1,335$


10.9 48/3000 - Premier 1,356$




August, 2017











10% Discount


25% Discount






August, 2017





Case CE Location


2/20/2017




August, 2017



2010

1.1 Make & Model Case CX300DOperating Weight 67,271 lbEngine Make & Model Isuzu AQ-6HK1XTier (Interim 4 or Final)? Tier 4 FinalHP at rated RPM (specify net or gross) 207 Net HPNumber of speeds Two-speedMax travel speed, MPH 3.4 MPHDrawbar pull, lbs. 52,380 lbfShoe width, in. 32"# of rollers on lower track Nine per SideGround pressure, PSI 6.4 PSIGround clearance, in. 18"Overall width of excavator 11' 2"Main pump(s) total flow, GPM 128.4 GPMSwing speed, RPM 10 RPMBoom length, ft-in 20' 2"Arm length, ft-in 10' 5"Arm breakout force, Normal, lb-ft 31,383 lbfMax dig depth, ft-in 23' 4"Reach at ground line, ft-in 34' 5"Dump height, ft-in 23' 3"Lift over end, 10’, lbs. 19,900 lbLift over end, max reach, lbs. 9,350 lbLift over side, 10’, lbs. 19,900 lbLift over side max reach, lbs. 7,000 lbBucket breakout force, normal lb-ft. 42,781 lbfTail swing radius, ft-in. 10' 4"Does excavator include bucket? NoIf so, descriptionWarranty Terms: hours/months/years 3 yr 3,000hr factory warranty

Price 254,500$


[email protected]


952-445-0365


Shakopee, MN 55379






August, 2017


2.0 OPERATOR ENVIRONMENT OPTIONS2.1 Air Suspension seat Standard2.2 Front window safety glass Standard2.3 Automatic Climate Control System ( heater & A/C ) Standard2.4 Radio - AM-FM w/dual rear mounted speakers Standard2.5 Sliding cockpit & pressurized cab Standard2.6 Fire Extinguisher Standard2.7 Selector valve for control pattern Standard2.8 Rain Deflector, not for use with front mesh or rock guards, 3.3, 3.4, 3.5 461555 248$ 2.9 Sun Visor 461554 70$ 2.10 Rear View Camera Standard2.11 Case Max View Monitor 488055 1,243$ 2.12 Side View Camera 461560 453$ 2.13 LED Work Lights Package (2 front, 2 rear, 1 each side, and a sideview camera) 488135 2,800$

3.0 EXCAVATOR EXTERIOR AND POWERTRAIN OPTIONS3.1 Whelen strobe 625$ 3.2 FOPS top guard, level 2 481070 747$ 3.3 Front rock guard - vertical bars, one piece 461024 1,515$ 3.4 Front rock guard - two piece / upper and lower 781986 1,286$ 3.5 Front screen - 2" by 2" mesh 461142 865$ 3.6 Vandal guard 461552 375$ 3.7 High Ambient Cooling Package 481027 330$ 3.8 Refuel Pump 481257 845$

3.9 Pre-Cleaner Cyclone 488031 305$

4.0 UNDERCARRIAGE OPTIONS4.1 32" Shoes (800 mm), steel, 3-bar 9560005 Standard4.2 28" Shoes (700 mm), steel, 3-bar 9560003 (438)$ 4.3 24" Shoes (600 mm), steel, 3-bar 9560013 (568)$ 4.4 Triple Track Chain Guide 461143 1,302$





August, 2017







6.0 BOOM AND ARM OPTIONS6.1 20' 2" Boom 481858 Standard6.2 10' 5" Arm 781180 Standard6.3 12' Arm 481850 735$ 6.4 8' 8" Arm 481243 (283)$ 6.5 Hose Burst Check Valve (boom and arm) 481064 5,160$

7.0 BUCKET/COUPLERS/TOOL OPTIONS7.1 Hydraulic quick coupler ready (req if ordering Hyd Coupler) 781128 1,802$ 7.2 Multi-Fit S coupler Kit 47848465 5,488$ 7.3 36" Heavy Duty Bucket (for 7.1) 84404268 4,966$ 7.4 42" Heavy Duty Bucket (for 7.1) 84404269 5,462$ 7.5 48" Heavy Duty Bucket (for 7.1) 84404270 6,008$ 7.6 54" Heavy Duty Bucket (for 7.1) 84404272 6,609$ 7.7 60" Ditching Pin-on Bucket 84404266 3,713$ 7.8 72" Ditching Pin-on Bucket 84404267 3,958$ 7.9 36" Heavy Duty Pin-on Bucket 84404254 4,146$ 7.10 42" Heavy Duty Pin-on Bucket 84404255 4,451$ 7.11 48" Heavy Duty Pin-on Bucket 84404256 4,895$ 7.12 36" Extra Heavy Duty Bucket 84404257 4,701$




August, 2017


7.13 42" Extra Heavy Duty Bucket 84404258 4,984$ 7.14 48" Extra Heavy Duty Bucket 84404259 5,481$ 7.15 54" Extra Heavy Duty Bucket 84404260 6,030$ 7.16 36" Severe Duty Bucket 84404261 4,855$ 7.17 42" Severe Duty Bucket 84404266 5,216$ 7.18 48" Severe Duty Bucket 84404265 5,738$ 7.19 Hydraulic Main Pin Direct Link Thumb (3 Tine, Pin On Bucket) 47609082 7,106$ 7.20 Hydraulic Thumb Kit (4 Tine, Pin on Bucket) 47609084 7,526$ 7.21 Hydraulic Thumb Kit (3 Tine, Bucket & Coupler) 47609085 7,304$ 7.22 Hydraulic Thumb Kit (4 Tine, Bucket & Coupler) 47609085 7,656$ 7.23 Progressive Link Thumb Kit (3 Tine, Pin on Bucket) 47609119 8,567$ 7.24 Progressive Link Thumb Kit (4 Tine, Pin on Bucket) 47609120 8,726$ 7.25 Progressive Link Thumb Kit (3 Tine, Bucket & Coupler) 47609121 8,765$ 7.26 Progressive Link Thumb Kit (4 Tine, Bucket & Coupler) 47609122 9,064$ 7.19 FX275 QT Hydraulic Breaker 46,775$ 7.20 FX375 QT Hydraulic Breaker 60,900$ 7.21 HP210II FT 13,450$ 7.22 CW36III 9,995$









August, 2017


Months/hours Coverage10.1 48/3000 - Power Train Only 582$ 10.2 48/4000 - Power Train Only 832$ 10.3 60/4000 - Power Train Only 1,003$ 10.4 60/5000 - Power Train Only 1,469$


10.9 48/3000 - Premier 1,493$




August, 2017











10% Discount


25% Discount






August, 2017




10% Discount




Case CE Location


2/20/2017





August, 2017



2010

1.1 Make & Model Case CX350DOperating Weight 82,483 lbEngine Make & Model Isuzu AQ-6HK1XTier (Interim 4 or Final)? Tier 4 FinalHP at rated RPM (specify net or gross) 266 Net HPNumber of speeds Two SpeedsMax travel speed, MPH 3.4 MPHDrawbar pull, lbs. 61,373 lbfShoe width, in. 32" Shoes# of rollers on lower track Eight Per SideGround pressure, PSI 7.5 PSIGround clearance, in. 19"Overall width of excavator 11' 2"Main pump(s) total flow, GPM 158.6 GPMSwing speed, RPM 9.7 RPMBoom length, ft-in 21' 2"Arm length, ft-in 10' 8"Arm breakout force, Normal, lb-ft 40,196 lbfMax dig depth, ft-in 24' 1"Reach at ground line, ft-in 35' 0"Dump height, ft-in 23' 9"Lift over end, 10’, lbs. 23,350 lbLift over end, max reach, lbs. 8,450 lbLift over side, 10’, lbs. 23,350 lbLift over side max reach, lbs. 8,350 lbBucket breakout force, normal lb-ft. 56,157 lbfTail swing radius, ft-in. 11' 8"Does excavator include bucket? NoIf so, descriptionWarranty Terms: hours/months/years 3 yr 3,000hr factory warranty

Price 282,680$


[email protected]


952-445-0365


Shakopee, MN 55379






August, 2017


2.0 OPERATOR ENVIRONMENT OPTIONS2.1 Air Suspension seat Standard2.2 Front window safety glass Standard2.3 Automatic Climate Control System ( heater & A/C ) Standard2.4 Radio - AM-FM w/dual rear mounted speakers Standard2.5 Sliding cockpit & pressurized cab Standard2.6 Fire Extinguisher Standard2.7 Selector valve for control pattern Standard2.8 Rain Deflector, not for use with front mesh or rock guards, 3.3, 3.4, 3.5 461555 248$ 2.9 Sun Visor 461554 70$ 2.10 Rear View Camera Standard2.11 Case Max View Monitor 488055 1,243$ 2.12 Side View Camera 461560 453$ 2.13 LED Work Lights Package (2 front, 2 rear, 1 each side, and a sideview camera) 488135 2,800$

3.0 EXCAVATOR EXTERIOR AND POWERTRAIN OPTIONS3.1 Whelen strobe 625$ 3.2 FOPS top guard, level 2 481070 747$ 3.3 Front rock guard - vertical bars, one piece 461024 1,515$ 3.4 Front rock guard - two piece / upper and lower 781986 1,286$ 3.5 Front screen - 2" by 2" mesh 461142 865$ 3.6 Vandal guard 461552 375$ 3.7 High Ambient Cooling Package 481027 330$ 3.8 Refuel Pump 481257 845$ 3.9 Pre-Cleaner Cyclone 488031 305$ 3.1 Catwalk 461553 1,376$

4.0 UNDERCARRIAGE OPTIONS4.1 32" Shoes (800 mm), steel, 3-bar 9560005 Standard4.2 28" Shoes (700 mm), steel, 3-bar 9560003 (509)$ 4.3 33.4" Shoes (850 mm), steel, 3-bar 9560006 444$





August, 2017







6.0 BOOM AND ARM OPTIONS6.1 21' 2" Boom 481858 Standard6.2 21' 2" Heavy Duty Boom 461543 1,720$ 6.3 10' 8" Arm (for option 6.1) 481245 Standard6.4 13' 3" Arm (for option 6.1) 781184 1,806$ 6.5 8' 8" Heavy Duty Arm (for option 6.2) 461546 90$ 6.6 10' 8" Heavy Duty Arm (for option 6.2) 461545 1,487$ 6.7 Hose Burst Check Valve (boom and arm) 481064 5,160$

7.0 BUCKET/COUPLERS/TOOL OPTIONS7.1 Hydraulic quick coupler ready (req if ordering Hyd Coupler) 781128 1,897$ 7.2 Multi-Fit S coupler Kit 47848466 6,239$ 7.3 42" Heavy Duty Bucket (for 7.1) 84404288 6,124$ 7.4 48" Heavy Duty Bucket (for 7.1) 84404289 6,572$ 7.5 54" Heavy Duty Bucket (for 7.1) 84404290 7,142$ 7.6 36" Heavy Duty Pin-on Bucket 84404275 4,774$ 7.7 42" Heavy Duty Pin-on Bucket 84404276 5,136$ 7.8 48" Heavy Duty Pin-on Bucket 84404277 5,318$ 7.9 60" Heavy Duty Pin-on Bucket 84405399 7,031$

7.10 42" Extra Heavy Duty Bucket 84404278 5,979$




August, 2017


7.11 48" Extra Heavy Duty Bucket 84404279 6,381$ 7.12 54" Extra Heavy Duty Bucket 84404280 6,822$ 7.13 36" Severe Duty Bucket 84404282 5,370$ 7.14 42" Severe Duty Bucket 84404284 6,004$ 7.15 48" Severe Duty Bucket 84404289 6,544$ 7.16 Hydraulic Main Pin Direct Link Thumb (3 Tine, Pin On Bucket) 47609087 7,722$ 7.17 Hydraulic Thumb Kit (4 Tine, Pin on Bucket) 47609088 8,371$ 7.18 Hydraulic Thumb Kit (3 Tine, Bucket & Coupler) 47609089 8,009$ 7.19 Hydraulic Thumb Kit (4 Tine, Bucket & Coupler) 47609090 8,689$ 7.20 Progressive Link Thumb Kit (3 Tine, Pin on Bucket) 47609123 9,835$ 7.21 Progressive Link Thumb Kit (4 Tine, Pin on Bucket) 47609124 10,028$ 7.22 Progressive Link Thumb Kit (3 Tine, Bucket & Coupler) 47609125 9,991$ 7.23 Progressive Link Thumb Kit (4 Tine, Bucket & Coupler) 47609126 10,411$ 7.24 FX375 QT Hydraulic Breaker 60,900$ 7.25 HP210II FT 13,450$ 7.26 CW36III 9,995$






Months/hours Coverage10.1 48/3000 - Power Train Only 728$




August, 2017


10.2 48/4000 - Power Train Only 1,040$ 10.3 60/4000 - Power Train Only 1,254$ 10.4 60/5000 - Power Train Only 1,835$


10.9 48/3000 - Premier 1,866$




August, 2017











10% Discount


25% Discount






August, 2017




10% Discount




Case CE Location


2/20/2017


SWIFT EVENT TITLE: Excavators and Attachments, 2017

** Following is a list of all distributors that are authorized to sell the equipment listed above.

** The Swift Vendor Number (SWIFT UD) must be complete, including the vendor Swift ID and Location Code (LOC CODE).

** All distributors MUST provide the required insurance certificates to the State as outline in the Swift Event Special Terms and Conditions before any State Contract may be executed.

COMPANY NAME SWIFT ID LOC CODE COMPANY ADDRESS ST /ZIP PHONE CONTACT NAMETitan Machinery Inc. 251892 18 6340 County Road 101 E Shakopee, MN, 55379 952-445-5400 Brenden HonebrinkTitan Machinery Inc. 251892 6 4001 38th Street SW Fargo ND, 54108 701-237-3333 Mary AureTitan Machinery Inc. 251892 10 500 Ingersoll Ave Crookston, MN, 56716 218-281-4668 Mike KolstoeTitan Machinery Inc. 251892 19 4311 Haines Road Hermantown, MN, 55811 218-727-3038 Ryan SchallTitan Machinery Inc. 251892 17 14375 James Road Rogers, MN, 55374 763-428-5099 Brenden HonebrinkTitan Machinery Inc. 251892 2 1201 North Hwy 59 Marshall, MN, 56258 507-532-5783 Lucas HilgemannTitan Machinery Inc. 251892 5 4400 W 62nd St North Sioux Falls, SD, 57107 605-336-3434 Matt LeightonTitan Machinery Inc. 251892 20 N 1626 Wuensch Road La Crosse, WI, 54601 608-788-1025 Ryan Schall

excavator 1.1 make & model5) exc… · case excavator attachments 2/20/2017. e-95 excavators...

Documents