evinrude e-tec 2008 - vogt · pdf fileevinrude e-tec 2008 spend more time on the water. 3 what...
TRANSCRIPT
spend more time on the water.
EV
INR
UD
E E
-TE
C 2
008
3
WHAT & WHERE
Intro to E-TEC 2-3
New 250 H.O. 4-5
Horsepower & Torque 6-7
Speed 8-9
Weight 10-11
Fuel Efficiency 12-13
Endurance 14-15
Maintenance 16-17
Product Lineup 18-19
Gauges 20-21
Controls & Propellers 22-23
Wearables 24-25
Engine Specs 26-27
Boat Partners 28-34
Warranty 35
BEsT of BoTH WoRlds.For years, two-stroke engines ruled the roost. They had raw muscle but lacked refinement. As boaters demanded cleaner, quieter engines, four-strokes pulled ahead. Then came Evinrude® E-TEC.® A two-stroke with the best qualities of a four-stroke, E-TEC is a category unto itself. Speed. Power. Weight. Noise. Emissions. In every way that matters, Evinrude E-TEC beats the competition. Especially when you consider ease-of-use. All our engines are built to go 3 years or 300 hours without dealer-scheduled maintenance. There’s no break-in period. No oil changes. No belts to replace. Ever. Your hardest decision? Deciding on blue or white.
> PoWER & PERfoRMANCE
Evinrude E-TEC outboards kick butt. Any way you want to do the kicking. Acceleration, top-end speed, any size, any horsepower, across the line. No four-stroke can touch our power-to-weight ratio. No four-stroke comes close to the pure power and torque of the basic two-stroke technology. And when it comes to acceleration, E-TEC beats every outboard on the water, two- stroke or four.
> durability / QUAlITY / RElIABIlITY
Fewer parts. Fewer problems. Every Evinrude E-TEC component is tested and retested for maximum performance and longer life. Parts are bigger and stronger to work harder and last longer. With our S.A.F.E. system you could even run five hours without oil, if you had to.
> Easy to own & operate
With an Evinrude E-TEC, there’s no more time wasted in the shop. You’ve got no dealer-scheduled maintenance for three years or 300 hours. Zero. Of course, zero oil changes, too. No break-in period. And about 200 fewer parts than a four-stroke, which means 200 fewer parts to wear out. When it comes to maintenance, less is more.
> ClEAN & QUIET
You don’t even have to think about emissions. Evinrude E-TEC is the cleanest outboardfamily in the world. Every E-TEC has 3-Star certification from the toughest of the tough – the California Air Resources Board. And thanks to the sophisticated, acoustically tuned air intake and exhaust systems, you won’t be filling the air with a lot of noise either.
Evinrude is a proud sponsor of the FLW Tournament Series. flwoutdoors.com
5
ThE bIggEST, moST poWERFUL E-TECS EVER. ThaT’S SayINg SomEThINg.
> Introducing the evinrude E-TEC 250 H.o.
We couldn’t leave well enough alone. So we did it one better. We took our revolutionary E-TEC® technology and scaled things up as far as they would go. Turns out, that’s pretty far. The result is an engine with a single goal of putting you back in your seat. Hope your neck muscles are strong.
> Bigger is Badder.
With Evinrude E-TEC, bragging rights are inalienable. These are not only the brawniest engines in our line, but among the biggest in anyone else’s. At 3.4 liters, the E-TEC 250 H.O. delivers 3% more displacement than a Yamaha 250 HPDI, 13% more than the Optimax 250XS and a whopping 32% more than the Verado 250. That translates into blistering acceleration and superior torque throughout the RPM cycle.
> Best-in-Class Torque.
No half measures here. Thanks to an increased stroke, the Evinrude E-TEC 250 H.O. delivers more low- and mid-range torque than the competition. Up to 30% more than a Yamaha 4-stoke. That translates to 60 more horsepower in the mid-range. That additional power can mean the difference between being able to plane the boat and not.
> lean Machines.
Big doesn’t have to mean heavy. The E-TEC 250 H.O. weighs 55 pounds less than the Yamaha 250 HPDI, 120 pounds less than Suzuki, and a jaw-dropping 160 pounds less than Mercury Verado. Since you can’t get around Newton’s Laws, that means better hole shots and higher top speeds.
7
More torque.hoRSEpoWER. In head-to-head tests*, the Evinrude E-TEC 150 blew away the Yamaha 150 hp four-stroke. Both horsepower and torque. Maybe it’s because we’re lighter. Maybe it’s because we deliver a power stroke every revolution. Or maybe it’s because we have E-TEC and they don’t.
PoWER & PERfoRMANCE
* Source: Ralph Evinrude Test Center / 2007 150 hp Evinrude E-TEC, 2006 Yamaha 150 hp 4-S. Testing done using dynamometer. §Yamaha is a Registered Trademark of Yamaha Motor Corporation, USA.
ThEy gIVE yoU moRE STRoKES.WE gIVE yoU moRE poWER.
Evinrude® E-TEC® outboards use boron-nitrite honed cylinder bores that work to decrease wear, giving you consistent hole shots and better torque and horsepower across the entire power curve. 22% more than Yamaha§, as shown in the chart below.
Four-strokes start out in a hole. It’s their weight problem. The extra parts and pieces they carry around are the basic shortcomings of their power cycle.
With the E-TEC technology, the Engine Management Module (EMM) makes up to 8 million calculations per second. And delivers precisely the right amount of fuel needed directly into the combustion chamber for incredibly smooth, fast response and low fuel consumption.
And the E-Start™ system ensures easy starts every time. No choking. No priming. No swearing.
HP
180
160
140
120
100
80
60
40
2025002000 3000 3500 4000 4500 5000 5500 6000
evinrude e-tec 150 hp yamaha 4s 150 hp
H E-TEC HoRsEPoWER AdVANTAGE H
RPM
GREATER
less
220
200
180
160
140
120
10025002000 3000 3500 4000 4500 5000 5500 6000
evinrude e-tec 150 hp yamaha 4s 150 HP
H E-TEC torque AdVANTAGE H
RPM
cra
nksh
aft
tor
que
GREATER
less
9
Burns water.SpEED. Cover more water, faster. The Evinrude E-TEC 150 gets to the 150 foot‡ mark in just 6.77 seconds*, well over a second faster than a Yamaha 150 hp. Play that out over a 25-mile stretch of water or offshore reef.
PoWER & PERfoRMANCE
WhoEVER SaID SpEED ISN’T EVERyThINg,NEVER oWNED aN EVINRUDE E-TEC.
How fast do you want to go? How about 79.7 mph† with an Evinrude® E-TEC® 150? That’s what it took to set the World Record Kilo Run in a specially formulated racing boat in the Super Sport class.
The same power and torque that set a world speed record is available to you. From family boat to fishing machine. Check out our advantage over Yamaha§ in a typical day on the water.
A combination of less weight and higher torque gives Evinrude E-TEC the edge. From hole-shots to top end. You’ll get there faster. You’ll get there first.
And isn’t that the whole point?
* Source: On water testing at the BRP US Inc. Ralph Ev2Trademark of Yamaha Motor Corporation, USA. †128.26 km/h. ‡45.72 m.
35 40 555045
yamaha 47.2
evinrude 49.5
evinrudE e-tec 150 hp yamaha 4-stroke 150 hp
H E-TEC top speed AdVANTAGE H
MPH
4
yamaha 8.36
evinrude 6.77
98765
H E-TEC Acceleration AdVANTAGE H
evinrude e-tec 150 hp yamaha 4-stroke 150 hp
sECoNds to 150ft.
SomE boaTS CaRRy aN EXTRa aNChoR. IT’S CaLLED ThEIR ENgINE.
The Evinrude® E-TEC® is pure muscle. That’s because a lot of extra thinking went into it. Not a lot of extra stuff.
None of the belts, camshafts, valves, gears, chains and pumps that four-strokes bring along for the ride. All those extra parts really add up, as you can see in the chart, where the Evinrude E-TEC engine takes on Yamaha§ and Mercury∞.
A lighter engine means better acceleration, speed and handling. You’re out of the hole faster and on plane a lot faster, with less bow rise and an earlier look at the water ahead.
And let’s be honest. The leaner profile looks a lot cooler, too.
evinrude e-tec 150 hp yamaha 4-s 150 hp MERCURY 4-s 150 hP
advertised weight actual weight
350
400
450
500
H E-TEC Weight AdVANTAGE H
550
475427
527 504
427
562
lbs
poUNDS. The Verado 150 weighs 38 pounds† more than the Evinrude E-TEC 225. Their middleweight against our heavy-weight. And they still outweigh us. That’s 3.74 pounds per horse vs. our 2.3.‡ Somebody needs to go on a diet.
More horses per pound.
11
* Source: Weights are advertised weights from each manufacturer’s 2006 website or product catalog at time of printing. Testing done at the BRP US Inc. Ralph Evinrude Test Center / 2007 150 hp Evinrude E-TEC, 2006
Mercury 150 hp 4-S, 2006 Yamaha 150 hp 4-S. Weight taken using digital scale with full operating fluids and no props. §Yamaha is a Registered Trademark of Yamaha Motor Corporation, USA. ∞Mercury
is a Registered Trademark of the Brunswick Corporation. †17.2 kg. ‡1.7 kg vs. 1.04 kg. ††61.2 kg.
scales don’t lie.WEIghT. Always travel light. The Evinrude E-TEC 150 weighs an incredible 135 pounds†† less than the Mercury Verado 150*. That’s not a mathematical error. It adds up to more speed and less fuel. And a lot less talk at the dock from your Mercury friends.
PoWER & PERfoRMANCE
13
#1 in toughness. (And #2).
ENDURaNCE. Two. That’s the number of Evinrude E-TEC engines racing Class S3000 in the legendary 24-hour Rouen endurance race.** Both Evinrude E-TEC 225 hp engines ran out of the box with no special race tuning or factory support. Not only did they both place – they took 1st and 2nd. That’s got to be a tough pill to swallow for Mercury, which had 12 entrants total.
durability / quality / reliability
* Source: Features taken from each manufacturer’s 2006 product catalog at
time of printing. **Evinrude racing results taken from 24 Hour Rouen Powerboat race.
†2,888 kilometers. §Yamaha is a Registered Trademark of Yamaha Motor Corporation, USA.
∞Mercury is a Registered Trademark of the Brunswick Corporation. Ω Honda is a registered trademark of
American Honda Motor Co., Inc. π Suzuki is a registered trademark of American Suzuki Motor Corp.
EVINRUDE E-TEC LEaVES CompETIToRS IN ThEIR WaKE. RIghT oUT oF ThE boX. Not even 24 hours of continual rain could dampen the spirits of the two Evinrude® E-TEC® powered teams in this year’s Rouen marathon. 24 hours and 1,795 miles† of non-stop racing on the Seine River in France. Two average guys out for a good time, who could’ve chosen any engine out there. They chose Evinrude E-TEC. And they won.
The engines they used to win in Rouen are the same ones you can buy. Evinrude E-TEC 225 hp engines, right out of the box. Nothing fine-tuned for the race, and no extra factory support. A statement none of our competitors can make.
As you can see in the chart, the Evinrude outboard with E-TEC technology is more dependable, more reliable, and offers the highest quality of any engine in the world. You get more features with an Evinrude E-TEC than you would with any of our competitors out there.
Evinrude E-TEC offers better endurance than any competitor, hands down. Why would you even consider another engine?
e-tec
H E-TEC standard feature advantage* H
NO DEALER SCHEDULED MAINTENANCE 3 years / 300 hours
NO BREAK-IN PERIOD Vitrified honing of cylinder bores, NASA developed piston alloy
TRUE MARINE GRADE GEAR LUBE Moisture absorbing, synthetic blend, ultra high viscosity
SEALED FUEL SYSTEM Minimizes oxidation to prevent damage during off-season storage
SELF WINTERIZATION/STORAGE
SELF FLUSHING COOLING SYSTEM
NO BELTS, CHAINS, LIFTERS OR VALVES Lower cost to own
250 hp engines Yamaha§mercury∞ sUZUKIπ
YEs
YEs
YEs
YEs
YEs
YEs
YEs
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
HoNdAΩ
15
EUROPEAN UNION 2006 All Evinrude outboard technology has been designed to meet the stringent European Union standards well into the future. Evinrude® E-TEC® meets and exceeds the EU emissions standards that went into effect January 1, 2007.
CARB RATING SYSTEM The symbol for cleaner marine engines. Clean Air and Water – For a healthier lifestyle and environment. Better Fuel Economy – Burns 30-40% less gas and oil than conventional carbureted two-stroke engines, saving money and resources. Longer Emissions Warranty – Protects consumers while delivering worry-free operation.
The 3-Star designation is the best in the outboard industry, signifying ultra low emissions. Three stars mean you can use it anywhere, without restrictions.
No outboard is cleaner.oIL. You have none to get rid of with an Evinrude E-TEC outboard. With a Yamaha 150, you’ve got 11 quarts† in the first year and 5.5‡ per year after that.** And you’re never totally sure where that oil will end up. With Evinrude E-TEC outboards, you know where every single drop is going. Into powering your boat.
Clean & Quiet
* Source: US Oil statistics for this report and the chart is a compilation of information from the American Petroleum Institute (API), “Used Oil Collecting and Recycling”, Washington, D.C., and the United States Environmental Protection Agency (EPA), “Collecting Used Oil for Recycling/Reuse”, Report EPA530-f-94-008. **Information obtained from the 2006 Yamaha Owner’s Manual. §Yamaha is a Registered Trademark of Yamaha Motor Corporation, USA. †10.4 liters. ‡5.2 liters.
ThE oIL goES INTo ThE ENgINE,NoT ThE ENVIRoNmENT.
Every drop of oil entering the Evinrude® E-TEC® combustion chamber is turned into power. We’re talking complete and total combustion. No waste. Nothing escaping into the air or the water. It’s one of the big reasons we’ve got a consistent, across the board 3-Star rating. There are no oil changes either. So, unlike four strokes, there’s no oil sitting around in collection buckets looking for a new home. Sure, some of it’s recycled. And that’s good. But according to the American Petroleum Institute*, over 17%, or 200 million gallons, is improperly disposed of. And that’s not good. The idea is to use oil. Not abuse it. And make boating better for yourself. And your children. The Evinrude E-TEC is also quieter than a four-stroke. That’s right, a two-stroke that’s quieter than a four-stroke. E-TEC outboards are quieter than Yamaha§ all the way through the ICOMIA Duty Cycle. Don’t believe us? Start one up.
H where used oil ends up H
Asphalt plants
industrial boilers
steel mills
utility boilers refining
spaceheaters
other
improperlydisposed
25
8.2
8.68.6 9.32
11.1
11.68
17.5
DECIbELS. Evinrude E-TEC simply doesn’t have many. We’re a two-stroke and we’re quieter than a Yamaha 4-stroke. Silencing our motors and all of the critics.
Quiet riot.
IT’S haRD To CaTCh FIShIN a SERVICE bay.
But it’s where an awful lot of four-strokes spend way too much of their time. We’ve got the best, most knowledgeable dealers in the business. But they’d rather see you out on a river or the ocean than in the shop.
An Evinrude® E-TEC® outboard needs no maintenance for three years or three hundred hours. Not even gearcase lube. Of course, no oil changes and no belts to adjust. And if you’re boating in the North, you won’t even have to worry about winterizing. You can do it yourself in the driveway in minutes.
A four-stroke spends more time at the dealer for maintenance. That’s a lot of missed weekends. And fish.
All Evinrude E-TEC outboards feature the S.A.F.E. (Speed Adjusting Failsafe Electronics) information and alarm system. It reduces engine rpm in an emergency to prevent damage to your engine and your investment.
A NASA-developed alloy makes our pistons 2 ½ times stronger than the competition’s pistons at operating temperatures.
timing belt
valve cleaning
spark plugs
lube engine oil
oil filter
water pump
ignition timing
H competitive maintenance AdVANTAGE H
evin
rud
eM
ercu
ry∞
yam
ah
a§
3 years 3 years 3 years
1 year 1 year 1 year 1 year 1 year 1 year 1 year 1 year
6 months 2 years 50 hours 6 months 6 months 1 year 1 year 1 year 1 year 1 year
1 year 1 year
valveadjust
thermo-stat
3 years
17
3 years. 0 visits.maINTENaNCE. By the time you take a two-stroke Evinrude E-TEC in for its very first scheduled dealer service, you’ll take a comparable Yamaha four-stroke in seven times.* Seven times. That’s seven weekends lost. Maybe it’s just us, but we’d rather go fishing than go to the mechanic.
EAsY To oWN & oPERATE
* Source: Suggested maintenance schedules are advertised recommendations from
manufacturer’s 2006 owner’s manuals at time of printing. §Yamaha is a Registered
Trademark of Yamaha Motor Corporation, USA. ∞Mercury is a Registered Trademark of
the Brunswick Corporation.
19
Hassle-free. No maintenance for three years or 300 hours of normal recreational use. Not even gearcase lube. Automatic off-season storage, no Spring tune-ups. No belts to replace or valves to adjust. And you’ll never have to change the oil.
No mixing of oil & gas. Evinrude E-TEC® has auto-lube mixing. Plus, complete combustion in the chamber prevents any oil from escaping into the environment.
No oil, no problem. If you should ever run out of oil out on the water, the S.A.F.E. (Speed Adjusting Failsafe Electronics) system kicks in. It limits rpm, giving you up to five hours to motor in without engine damage.
Starts every time. The E-Start™ system provides instantaneous starting, with no choking and no priming, ever. And we mean EVER.
Clean. The entire E-TEC line is CARB 3-Star certified. This is the cleanest engine in the world.
less FUEL. Under any load or condition. Thanks to a fully stratified combustion system coupled with our Engine Management Module.
LESS NOISE. “Hey, is this thing running?” Our exclusive idle air bypass circuit, acoustically tuned intakes, exhaust silencers, and 3-dimensional foam lining add up to major sound reduction.
No break-in. Thanks to boron- nitrite honed cylinder bores that make a layer of oil cling to the cylinder walls, you can run your engine full-throttle from day one. For increased engine life, our pistons use a NASA developed alloy, making them 21/2 times stronger than the competition.
Long Lasting Components. Stainless steel steering tube, pivot shaft, drive shaft, prop shaft, and fasteners.
SHAKES SALT. Electro deposition paint creates an extremely durable barrier for added protection in salt water.
Less Corrosion. Split-line gear case and low-copper aluminum alloy castings reduce corrosion.
THE ULTIMATE OUTBOARD.
SEE OUR FULL LINE-UP
Page 20 Page 21
The 1.7L V4s. The 3.3L V6s. The 2.6L V6s.
~ 200 ~ ~ 175 ~ ~ 150 ~~ 150 h.o. ~ ~ 115 ~~ 250 ~ ~ 225 ~ ~ 200 H.O. ~~ 225 h.o. ~
The 3.4L V6.
~ 250 h.o. ~
~ 90 ~ ~ 75 ~ ~ 60 ~ ~ 50 ~ ~ 40 ~
The inlinES.
~ 90 ~ ~ 65 ~
COMMERCIAL.
40 hp–60 hp engines now available in blue with factory installed Tiller Handle.
yoU’VE goT ThE LEaD.hERE’S hoW To maINTaIN IT.
You’ve got the best outboard on the water today. And with Genuine Evinrude® Parts, Controls and Accessories – made tough, smart and specifi-c a l l y for your E-TEC® outboard – it’ll stay that way for a whole lot of tomorrows.
H I-CoMMANd™ dIGITAl* H
More ways to communicate with your engine than ever before. Too much information? Never.
You decide how to view THE dIGITAl displays
Analog View Digital ViewoR
Single, Dual, or Quad
yoU’VE goT ThE LEaD.hERE’S hoW To maINTaIN IT.
You’ve got the best outboard on the water today. And with Genuine Evinrude® Parts, Controls and Accessories – made tough, smart and specifically for your Evinrude E-TEC® outboard – it’ll stay that way for a whole lot of tomorrows.
EVINRUdE E-TEC ACCEssoRIEs:GAUGEsCoNTRolsPRoPEllERsWEARABlEs
AVAIlABlE IN BlACK, CHRome, white, or gold
21
GAUGEsH I-CoMMANd ClAssIC* H
You go with what works. And nothing works better. Same great look and feel as your existing gauges. Easily scrollable LCD screen. Features include at-a-glance functionality, simplicity and analog displays.
CHRoME / WHITE fACE CHRoME / TAN fACE BlACK CHRoME / sIlVER fACE
*I-Command gauges are compatible with 2008 Evinrude E-TEC 40 hp and above.
23
CoNTRols & PRoPEllERs
H PRoPEllERs H
Binnacle
Binnacle with Key
sURfACE sIdE MoUNT
dual Binnacle
WhERE maN mEETS maChINE.
Presenting the new Throttle Lever Controls. Beautifully designed to complement your new engine, their perfect ergonomics make the hours on the water fly by even faster. Their unmatched precision gives you smooth and easy control at any speed.
H THRoTTlE lEVER CoNTRols H
FoR ThoSE Who NEED a LITTLE moRE CoNTRoL, ThERE’S ThE TILLER KIT.
Easy, comfortable operation. Convenient, forward mounted shift lever and trim switch offer better accessibility and increased control for maneuvering. Built in key-switch and end of handle push button cranking provides added security and ease of starting. Horizontal and vertical adjustments make for a perfect fit to any application or driver. Available in blue or white.
Quick, convenient push button starting.
Added security of a built-in key switch.
Easy horizontal and vertical adjustments for ultimate control and comfort.
Optional gauge harness for those wanting instrumentation.
Thumb control trim and tilt right where your thumb naturally rests.
H TIllER KIT H
H
H
H
H
H
H
H
H
H H
H
H
H
H
H
H
*90 and 115 hp models with 25" gearcases use V6 150-250 hp props. **Applies to new props purchased after July 1, 2006.
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H H
H
H
H
H
H
H
H
H
H
HH
H
H
H
H
H
H
H
poWER, mEET WaTER. WaTER, mEET poWER.
The Evinrude® E-TEC® TBX™ propeller hub system adds a new level of durability and reliability to Raker II® V6, Renegade® Bass V6, Viper™ V6, Rebel™ and Cyclone™ propellers.
• TBX(TorsionBushingExtreme)isdesignedtoflexandcushionshockloadstohelpprotect the lower unit drive train
• Patentedtorsionsleeveanddrivesplinewithstandextremetemperaturesespeciallyin high performance applications
• TBX prop hub system is standard in Raker II® V6, Renegade® Bass V6, Viper™ V6, Rebel™ and Cyclone™ props
• ATBXprophubkitcomeswitheachpropellerandthemulti-piecedesignslipstogether keeping installation easy and simple
raker ii tbx
cyclone tbx renegade tbxDRIVE SPLINE
TORSIONSLEEVE
TBX PROPELLER HUB KIT
(Raker)
(Raker)
(Raker)
(non TBX™)
(non TBX™)
(non TBX™)
H
All Evinrude E-TEC propellers feature
a 3-year limited warranty.**
H H H
H
H
H
H
H
H
H
H
H
rebel tbx
Viper tbx
bass boat
deck boat
performance
utility
fishing
runabout
offshore
cruiser
pontoon
bay/flats
I2 40-60 hp
I3 75-90 hp*
V4 115 hp*
v6 150-250 hp
Mustang® Inflatable Pfd
25
wearablesCLoThINg aND aCCESSoRIES aS STyLISh aS oUR oUTboaRDS.
Our new line of Evinrude® apparel features cutting-edge designs and fabric so comfortable, you won’t want to wear anything else.
Find all of this and more at www.evinrude.com.ladies’ crew tee short sleeve crew tee
long sleeve contrast stitch tee White long sleeve tee
ladies’ cap sleeve tee
H WEARABlEs H
Hooded sweatshirt
White cap
ladies’ hoodie
jacket
Girls’ 3/4 sleeve tee
White visor
Navy cap
Camo cap
Men’s Ringer Tee Youth tee
a. 20" (508) Blue b./c. 25" (635) White d./e. 30" (762) White
a. 20" (508) Blue b. 20" (635) White c. 25" (635) Blue
a. E250DPL b. E250DPXc. E250DCXd. E250DPZe. E250DCZ
250HV6
a. E225DHLb. E225HSLc. E225DHX
225H.o.HV6
a. E225DPLb. E225DPXc. E225DCXd. E225DPZe. E225DCZ
225HV6
a. E200DHLb. E200HSLc. E200HVLd. E200DHXe. E200HCX
200H.o.HV6
Shaft Length in (mm) Color
a. E175DPLb. E175DSLc. E175DPXd. E175DCX
175HV6
a. E150DHLb. E150HSL
150H.o.HV6
a. E150DPLb. E150DSLc. E150DBXd. E150DPXe. E150DCX
150HV6
a. 20" (508) Blue b. 20" (508) White c./d. 25" (635) White
a. 20" (508) Blue b. 20" (508) White
a. 20" (508) Blue b. 20" (508) White c. 25" (635) Blue d./e. 25" (635) White
a. 20" (508) Blue b./c. 25" (635) White d./e. 30" (762) White
a. 20" (508) Blue b./c. 20" (508) White d./e. 25" (635) White
a. E200DPLb. E200DSLc. E200DPXd. E200DCX
200HV6
a. 20" (508) Blue b. 20" (508) White c./d. 25" (635) White
Evinrude® 2008Model Letter Designations
C = Counter Rotation GearcaseD = E-TEC®
E = Electric StartH = H.O. VersionL = 20" ShaftP = Power Trim & TiltR = Rope Start w/ Tiller Steering
S = Power Trim & Tilt, White 20"T = Accessory Tiller IncludedV = Standard GearcaseW = CommercialX = 25" ShaftZ = 30" Shaft
a. 516 (234) b./c. 524 (238) d./e. 530 (240)
a./b. 509 (231) c. 517 (233)
Electric
FasTrak™ Power Trim and Tilt
250 HP (187 kw) @ 5150 RPM
4500-5800 RPM
1.85:1
E-TEC Direct Fuel Injection with stratified low RPM combustion mode
Variable Voltage Computer Controlled 133 Amp* / 1800 watt output with Regulator
Pressure and Temperature Controlled Water Cooled
Remote
3 Years Non-Declining
Factory Tuned for High Performance
Factory Tuned for High Performance
1.86:1 High Speed
225 HP (168 kw) @ 5150 RPM
1.85:1 a./b. 1.86:1 High Speed c./d./e. 1.85:1
Weight lbs (kg)
Engine Type
Bore x Stroke in (mm) Displacement cu in (cc)
Starting
Trim Method
Propshaft HP ***(kilowatts)
Full ThrottleOperating Range
Fuel Induction
Alternator
Cooling
Steering
Limited Warranty
a./b. 419 (190) c./d. 427 (194)
3.600 x 2.588 (91 x 66)158 (2589)
175 HP (131 kw) @ 5350 RPM
a./b. 1.86:1 c./d. 1.85:1
a./b. 419 (190)
Factory Tuned for High Performance
a./b. 1.86:1 High Speed
a./b. 419 (190) c./d./e. 427 (194)
150 HP (112 kw) @ 5350 RPM
a./b. 1.86:1 c./d./e. 1.85:1
Loop Charged V6 90˚ E-TEC Direct Injection (D.I.)
a. 516 (234) b./c. 524 (238) d./e. 530 (240)
a./b. 509 (231) c. 516 (234) d./e. 524 (238)
3.854 x 2.858 (98 x 73)200 (3279)
3.854 x 3.000 (98 x 76)210 (3441)
Gear Ratio
a./b. 419 (190) c./d. 427 (194)
Loop Charged V6 60˚ E-TEC D.I.
200 HP (149 kw) @ 5350 RPM
4850-5850 RPM
a./b. 1.86:1 c./d. 1.85:1
Emissions Compliance
*133 Amp current calculated at 13.5 V. Net dedicated battery charging power output is 50 Amp. **75 Amp current calculated at 13.5 V. Net dedicated battery charging power output is 25 Amp.
27
a./b. 320 (167) c. 326 (170)
a. 20" (508) Blue b. 20" (508) White c. 25" (635) White
a. E90DPL b. E90DSLc. E90DPX
90HINLINE 3
a. E65WDRL
65HCOMMERCIAL
a. E50DPLb. E50DSLc. E50DTL
50HINLINE 2
FasTrak™ Power Trim and Tilt Power Trim and Tilt a./b./c. Power Trim and Tilt
d. Manual Tilt
a./b./c. Electric d. Rope
90 HP (67 kw) @ 5000 RPM
5500-6000 RPM
a./b. 2.0:1 c. 2.25:1
E-TEC Direct Fuel Injection with stratified low RPM combustion mode
Variable Voltage Computer Controlled 75 Amp** / 1100 watt output with Regulator
Pressure and Temperature Controlled Water Cooled
3 Years Non-Declining
60 HP (45 kw) @ 5750 RPM
2.67:1
50 HP (37 kw) @ 5750 RPM
a./b. 240 (109) c. 251 (113) d. 232 (105)
40 HP (30 kw) @ 5500 RPM
5000-6000 RPM
Inline 3-cylinder E-TEC D.I.
a./b. 240 (109) c. 251 (113)
a./c./d. 20" (508) Blue b. 20" (508) White
a./c. 20" (508) Blue b. 20" (508) White
a./c. 20" (508) Blue b. 20" (508) White
79 (1295) 52.7 (863)
a./b. Remote or Acc. Tiller c./d. Tiller Standard
a. E115DPLb. E115DSLc. E115DBXd. E115DPXe. E115DCX
115HV4
a./b. 369 (167) c./d./e. 375 (170)
a. 20" (508) Blue b. 20" (508) White c. 25" (635) Blue d./e. 25" (635) White
3.600 x 2.588 (91 x 66)105.4 (1726)
115 HP (86 kw) @ 5750 RPM
4500-5500 RPM
a./b. 2.0:1 c./d./e. 2.25:1
Loop Charged V4 60˚ E-TEC D.I.
Inline 2-cylinder E-TEC D.I.
a./b. 320 (145)
a. 20" (508) Blue b. 20" (508) White
a. E75DPL b. E75DSL
75HINLINE 3
75 HP (56 kw) @ 5000 RPM
a./b. 2.0:1
Remote or Accessory Tiller
5500-6000 RPM
a./b. Remote or Acc. Tiller c. Tiller Standard
Electric
a. E90WDELb. E90WDEX
90HCOMMERCIAL
a. E40DPLb. E40DSLc. E40DTLd. E40DRL
40HINLINE 2
a. E60DPLb. E60DSLc. E60DTL
60HINLINE 2
a. 20" (508) Blue b. 25" (635) White
a. 20" (508) Blue
a. 320 (145) b. 326 (148) a. 235 (107)
Electrica. Rope
Manual Tilt w/ assist cylinder
FasTrak™ Power Trim and TiltManual Tilt w/ assist cylinder
90 HP (67 kw) @ 5000 RPM
65 HP (48.5 kw) @ 5750 RPM
a./b. 2.0:1
a. Tiller Standard
a. E250DHLb. E250DHX
250H.o.HV6
Factory Tuned for High Performance
4500-6000 RPM
1.71:1 High Speed
a. 20" (508) Blue b. 25" (635) Blue
a. 507 (230) b. 515 (234)
CAMPIoN CAPE HoRN CARolINA sKIff
CHAMPIoN checkmate marine CREsT
29
BlUE WAVEBENNINGToN
AQUA PATIo
AlUMACRAfT
AVAloN/tahoe
BoAT PARTNERs
We don’t build boats for outboards. We concentrate on building the best engine any boater
out there would want: So when you see an Evinrude® E-TEC® on a boat’s transom, it’s
because the builder wanted to put it there. Not because he had to.
ANGlER
paRTNERS. Our OEMs don’t choose us because we’re family. They choose us because we’re good. Brunswick owns 20, we own none. And that works just fine.
Chosen. Not imposed.
BAss CAT
bluewater
MANIToU
marlowmaritime skiff MCKEE CRAfT
31
lARsoN MAKo
GodfREY
HYdRA-sPoRTs INTREPId
HURRICANE
KEY WEsTdUBAWNT
dUsKY
dARGEl
fisher beavertail
GlAsTRoN
dAKoTA BoATs
forest river
33
PREMIER
SEA ARK
PRO-LINE
sheaffer boats
shallow sport boats
SMOKER CRAFT
RANGER
SEA SWIRL
shoalwater boatsPOLAR KRAFTPANGA
MISTY HARBOR PALM BEACH
STANLEY STRATOS SUNDANCEprogator boats
MIRROCRAFT
short gatepage 35
WEllCRAfTWEld-CRAfT
woolridge
WAR EAGlEtwin vee
WEEREs
ZodIAC
Evinrude would also like to recognize the following boat partners:
•All Craft Marine•HunterMarine•Lake&Bay•Eastern•LegendCraft
•Phoenix•Pioneer•StarcraftMarine•Ultracraft•Warrior
TRIUMPH
Fuel economy: Fuel economy claims are based on laboratory tests utilizing ISO 8178-4 and boat tests performed at BRP facilities. Actual fuel usage will vary depending on the boat, payload, operating conditions, propeller, and driving habits. ***Power Ratings: Evinrude® outboards are power rated in accordance with NMMA procedure using the International Council of Marine Industry Associates (ICOMIA) standard 28/83. Remote Control: Not supplied with engine.
For all models, a wide variety of props are available at extra cost. A full line of Hydrus™, SST®, Raker® II, Viper,™ and Renegade™ propellers are available for standard and counter-rotation models. Maximum Boat Horsepower: By law, most outboard boats up to 20 feet in length must carry a plate certifying the maximum horsepower permitted under U.S. Coast Guard regulations. Do not exceed boat’s horsepower rating or tamper with engine’s emission levels or components.
Warranty: The Evinrude Limited Warranty has been furnished to Evinrude dealers for inspection at the point of sale and is included with the Operator’s Guide furnished with each motor. Three year Evinrude warranties apply to new 2004, 2005, 2006, 2007, and 2008 engines sold by authorized dealers in North America for recreational use only. Contact the company for information on government, commercial, and promotional engine warranties. See limited warranty statement for full details.
Specifications: In furtherance of our policy of continual product improvement, we reserve the right to discontinue, substitute, change, or improve the design of any outboard motor at any time, without assuming obligation to modify motors previously manufactured. We reserve the right, at any time, to discontinue or change specifications, price, designs, features, models, or equipment without incurring obligation. The information in this brochure is based on the latest specifications available at the time of printing. See your Evinrude/Johnson dealer for the latest product information.
Some models depicted herein may contain accessories or be shown with options which are available at an extra cost from your Evinrude/Johnson® dealer. Engine performance may vary depending on, among other things, general conditions, ambient temperature, ability, options, modifications, and driver and passenger payload weight, engine type, and optional equipment. Information contained in this publication reflects domestic U.S. and Canadian product availability. Product availability and warranty may vary outside the U.S. and Canada.
For advertising purposes, some pictures in this brochure include professional drivers executing maneuvers under ideal and/or controlled conditions. Do not attempt any of these, or any other risky maneuvers, if they’re beyond your level of driving ability. Always consult your local dealer when selecting an outboard for your particular needs and carefully heed and pay special attention to your Operator’s Guide, and the on-product labeling. Always drive responsibly and safely. Severe injury can result from ignoring warnings, not following the instructions, or improper use of boats and engines. Use common sense and courtesy. Always observe applicable local laws and regulations. Respect the rights of, and keep a safe distance from, other recreationists, bystanders, and the shoreline.
Always wear the appropriate clothing, including a Coast Guard-approved P.F.D. as dictated by the circumstances including, but not limited to, the weather, boating conditions, and age and abilities of the occupants. Don’t drink and drive.
Evinrude would like to thank All Craft Marine, Alumacraft, Angler, Aqua Patio, Avalon/Tahoe, Bass Cat, Bennington, Bluewater, Blue Wave, Campion, Cape Horn, Carolina Skiff, Champion, Checkmate Marine, Crest, Dakota Boats, Dargel, DuBawnt, Dusky, Fisher Beavertail, Forest River, Glastron, Godfrey, Hurricane, Hydra-Sports, Intrepid, Key West, Larson, Mako, Manitou, Maritime Skiff, Marlow, McKee Craft, Mirrocraft, Misty Harbor, Palm Beach, Panga, Polar Kraft, Premier, ProGator Boats, Pro-Line, Ranger, Sea Ark, Sea Swirl, Shallow Sport Boats, Sheaffer Boats, Shoalwater Boats, Smoker Craft, Stanley, Stratos, Sundance, Triumph, Twin Vee, War Eagle, Weeres, Weld-Craft, Wellcraft, Woolridge and Zodiac, who provided boats for this brochure‡.
BRP US Inc. 10101 Science Drive, Sturtevant, Wisconsin 53177.
© 2008 Bombardier Recreational Products Inc. All rights reserved. ®, TM and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates.
*** Power Ratings: Evinrude outboards are power rated in accordance with NMMA procedure using the International Council of Marine Industry Associates (ICOMIA) standard 28/83.
‡ All other trademarks are the property of their respective owners.WARRANTY. What’s the difference between our three-year warranty and their three-year warranty?
Ours is non-declining. Which means that everything that was covered on Day 1 is still covered on Day 1,095. Not many manufacturers stand behind their engines the way we do. And the ones that do only do it because we did it first.
Stronger warranty.
35
EVINRUDE E-TEC ADVANTAGEPO Box 308Budd Lake, NJ 07828
Evinrude E-TEC AdvantagePO Box 308Budd Lake, NJ 07828
STANDARD POSTAGE
RATES APPLY*.
* Standard postage rates apply. US postcard rate is $0.26. Canadian rate is $0.93.
★Get the FREE DVD and SEE Evinrude E-TEC in ACTION.
★
Want to know more about how the two-stroke Evinrude E-TEC knocks other engines out of the water?
★ We’ll gladly send you a free DVD. ★
CONTACT US:
BY WEB:
Visit www.evinrude.com
BY TELEPHONE:
Call us at 1-866-EVINRUDE
BY MAIL:
Complete the card below, add postage, and drop in the mail.
NameAddress
Telephone No.
YE
P, T
EL
L M
E M
OR
EA
BO
UT
EV
INR
UD
E E
-TE
C
©2008 Bombardier Recreational Products Inc. All rights reserved. ® TM and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates. Printed in Canada P/N: 764700
SKI-DOO® LYNX™ SEA-DOO® EVINRUDE® JOHNSON® ROTAX® CAN-AM™
Nothing is more valuable than your playtime. That is why BRP is dedicated to continuously finding new and better ways to help you enjoy your favorite powersports. From snow to water to both on and off-road fun, our passion for adventure fuels the innovations that result in the ultimate powersports experience for our customers. We value
the land and water we play on and are committed to protecting it. Our desire to thrill is paired
with an emphasis on rider responsibi l i ty, placing personal safety above al l else. So that each outing can be the most
enjoyable, memorable and thrilling experience possible. Because your free time should a lways be your best t ime .
www.brp.com
THE WORLD IS OUR PLAYGROUND