8/6/2019 Eurotech Rapido

http://slidepdf.com/reader/full/eurotech-rapido 1/1

Some of the savings and com-pe��ve advantages of a Euro-tech Rapido over a Swiss stylemachine are:

Save material because bar rem-nants are less than half the length

of machines with guide bushings

Easily run non-round bar, including

hex and extruded stock.

Load chucked parts, blanks, forg-

ings and casngs.

Hold ght roundness toleranceswith ease.

Reduce cycle mes by running at

higher RPM.

  Turn parts using mulple passes.

Drill deep holes with ease.

Eliminate most chip control issues.

Take heavy cuts with 15 HP.

Great access for setup and operator.

 Runs Faster, Sleeps Less 

In a nutshell ; Faster cycle �mes, Faster setup �mes with more flexibility.

tel: 352-799-5223 | sales@eurotechelite.com | fax: 352-799-5446

Its Faster.......  ‘Triplo’ sub-spindle and so�ware - delivers3- tools in the cut

  Eurotech gap eliminaon  7000 rpm on the main spindle  7000 rpm on the sub-spindle  Index me 0.1 - bidireconal servo turrets

Its Powerful..  15 Horsepower on the main and sub-spindle

  Rigid fixed head stock design

Its Compact..  Minimal Floor Space - 149” x 55”  Great access for fast, easy setup

Great chip flow with no shelves

T U R N / M I L L M A C H I N I N G C E N T E R

Eurotech Rapido 10-Axis Manufacturing Cell

Programmable

Parts Catcher and

Parts Conveyor

System

(2) 12 sta�on

Turrets with

1.97” of Y-AxisStroke

Great

Ergonomics

Compact footprint: 149” x 55”