ICS 17.040.10; 77.140.85

Gesenkschmiedeteile aus Stahl – Maßtoleranzen – Teil 2: Warmhergestellt in Waagerecht-Stauchmaschinen

European Standard EN 10243-2 : 1999 has the status of a DIN Standard.

A comma is used as the decimal marker.

National forewordThis standard has been prepared by ECISS/TC 28.The responsible German body involved in its preparation was the Normenausschuss Eisen und Stahl (Steeland Iron Standards Committee).

AmendmentsDIN 7526, January 1969 edition, has been superseded by the specifications of EN 10243-1 and EN 10243-2.

Previous editionDIN 7526: 1969-01.

Ref. No. DIN EN 10243-2 : 2000-06English price group 12 Sales No. 1112

10.00

DEUTSCHE NORM June 2000

EN 10243-2{

Continued overleaf.EN comprises 33 pages.

© No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut für Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).

Steel die forgings – Tolerances on dimensionsPart 2: Upset forgings made on horizontal forging machines

English version of DIN EN 10243-2

This standard, together withDIN EN 10243-1, June 2000edition, supersedes DIN 7526,January 1969 edition.

English version

ICS 77.140.85

Descriptors:

Steel die forgings – Tolerances on dimensionsPart 2: Upset forgings made on horizontal forging machines

© 1999. CEN – All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.

Ref. No. EN 10243-2 : 1999 E

Gesenkschmiedeteile aus Stahl –Maßtoleranzen – Teil 2: Warmhergestellt in Waagerecht-Stauch-maschinen

This European Standard was approved by CEN on 1999-08-22.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Central Secretariat or to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Central Secretariat has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,and the United Kingdom.

EN 10243-2

September 1999

Central Secretariat: rue de Stassart 36, B-1050 Brussels

European Committee for StandardizationComité Européen de NormalisationEuropäisches Komitee für Normung

ÈÉË

Pièces forgées par estampage enacier – Tolérances dimensionnelles –Partie 2: Pièces exécutées à chaudsur machines horizontales à forger

Page 2EN 10243-2 : 1999

2

3

3

4

4

6667

889

20

20

2023

23

23

232323242424

28

Page 3EN 10243-2 : 1999

Page 4EN 10243-2 : 1999

Page 5EN 10243-2 : 1999

Direction of heading

tool to form upset portion

Unforged bar stock

Upset portion

Page 6EN 10243-2 : 1999

Page 7EN 10243-2 : 1999

Enveloping shape

Page 8EN 10243-2 : 1999

Page 9EN 10243-2 : 1999

Page 10EN 10243-2 : 1999

Page 11EN 10243-2 : 1999

Page 12EN 10243-2 : 1999

Page 13EN 10243-2 : 1999

Page 14EN 10243-2 : 1999

Page 15EN 10243-2 : 1999

Page 16EN 10243-2 : 1999

Cen

tres

Page 17EN 10243-2 : 1999

Page 18EN 10243-2 : 1999

Page 19EN 10243-2 : 1999

Page 20EN 10243-2 : 1999

Page 21EN 10243-2 : 1999

Page 22EN 10243-2 : 1999

Page 23EN 10243-2 : 1999

Page 24EN 10243-2 : 1999

Page 25EN 10243-2 : 1999

Page 26EN 10243-2 : 1999

Page 27EN 10243-2 : 1999

Page 28EN 10243-2 : 1999

Page 29EN 10243-2 : 1999

Page 30EN 10243-2 : 1999

Page 31EN 10243-2 : 1999

Page 32EN 10243-2 : 1999

Page 33EN 10243-2 : 1999

Beuth Verlag GmbH2001-12-18T10:15:14+010012163 BerlinDIN Deutsches Institut fuer Normung e. V.Dokument ist zertifiziert