europe headquarters: fax: +44 (0) 1600 551197 email:...

EUROPE HEADQUARTERS: Qlite LimitedWyastone Business ParkMonmouth, NP25 3SRUnited KingdomTel: +44 (0) 1600 772297Fax: +44 (0) 1600 551197Email: [email protected]

ASIA & PACIFIC HEADQUARTERS: Qlite Electronics Controls P. LtdNo. 16, Prestige Elgin25th Main Jayanagar 9th Block, Bangalore, IndiaTel: +91 80 26636611Fax: +91 80 26636611Email: [email protected]

MIDDLE EAST & AFRICAHEADQUARTERS:P.O. Box 1858, Manama Kingdom of BahrainTel: +973 13654045Fax: +973 13654035Email: [email protected]

Dimming & Lighting Control Panels

We offer custom-built cabinets to meet your particular requirement with single & three phase power supplies with and without, I/P & O/P protection devices to comply with the local regulations. All our cabinets are designed to use the same interchangeable dimming modules. All our Dimming & Lighting control systems are manufactured in compliance with all the applicable EC specifications EN5501on EMC and Low Voltage directives. We offer 6,12, 18&24 channel dimming and lighting control panels as part of our standard ex-stock range.

All modules are standardDin rail mountedconstruction

Earth Bus Bars

O/P MCB’s

Input RCCD

Input Isolator

Neutral BusBars

2/4/8 Channel Dimming Module

2/4/8 Channel Switching Module

Dimming & lighting control panel sizes:• 24 Channel Dimming & Lighting Control Panel 890mm Height x 890mm Width x 140mm Depth• 18 Channel Dimming & Lighting Control Panel 650mm Height x 975mm Width x 140mm Depth• 12 Channel Dimming & Lighting control Panel 650mm Height x 660mm Width x 140mm Depth• 6 Channel Dimming & Lighting Control Panel 650mm Height x 345mm Width x 140mm Depth• Metal used : EG Sheet Enclosure Thickness 1mm• Panel IP Rating : IP 20

The metal construction cabinets have been designed and built for: Safety, Reliability & Serviceability. Finished in RAL 7024 Graphite Grey or RAL 7032 Grey, epoxy polyester semi-gloss, with segregated compartments for power and control termination’s. Heat dissipation inside the panel is by natural convection. The Cabinet is not used as a “heat sink”, i.e. there are NO electronic items like chokes or relays fitted to the cabinet.

QL-SW216

QL-SW420

QL SW216 is a Two (2) Channel switching module with current rating of 16A per channel. The Din rail mountable module is totally self contained with its own integral PSU and can be configured as part of a central system or as a standalone system.

This module can be fitted along with protection devices in the distribution board or into a cabinet with any other

QL SW420 is a four (4) Channel switching module with current rating of 20A per channel. The Din rail mountable module is totally self contained with its own integral PSU and can be configured as part of a central system or as a standalone system.

This module can be fitted along with protection devices in the distribution board or into a cabinet with any other modules. The Metal construction has been designed and built for safety, reliability & serviceability with standard din rail mountable fixing arrangement.

The channel numbers for each output can be configured. After power loss, on restoration the system will restore each channel to the status prior to the power loss.

MODULES

Specification:• Power Supply: AC 90—240V

• Output: Maximal output of each channel is 16A

• Protocol: DMX-512/QL-Net

• Dimension: 120(W) x 59(H) x 87.5(D)mm

Specification:• Power Supply: AC 90—240V• Output: Maximal output of each channel is 20A• Protocol: DMX-512/QL-Net• Dimension: 144(W) x 59(H) x 87.5(D)mm• Weight: 500g

Features• Standard DMX-512 signal.• Din rail-mounted. Manual setting available and

easy to operate.• 2 channels dry contact, each can be set as ON/OFF/

AUTO mode individually.• Each channels maximal output can be 16A.• Up to 99 zones synchronization.

(99 devices work together)• Delay time setting (0.1S~10S) for each channel to avoid

current surge.• Connectable to QL series control panels, each of them can

work independently or synchronously.

Features• Standard DMX-512 signal.• Din rail-mounted. Manual setting available and easy to

operate.• 4 channels dry contact, each can be set as ON/OFF/

AUTO mode individually.• Each channels maximal output can be 20A.• Up to 99 zones synchronization.

(99 devices work together)• Delay time setting (0.1S~10S) for each channel to avoid

current surge.• Connectable to QL series control panels, each of them can

work independently or synchronously.

modules. The Metal construction has been designed and built for safety, reliability & serviceability with standard din rail mountable fixing arrangement. The channel numbers for each output can be configured. After power loss, on restoration the system will restore each channel to the status prior to the power loss.

1. LED Screen2. [DMX], [FCN], , , , Buttons3. On/Off/Auto Switch4. Ac Input5. Output6. DMX-512/QL-NET Input

3


3

QL-SW216

3

QL-SW810

QL 405

QL SW810 is an eight (8) Channel switching module with current rating of 10A per channel. The Din rail mountable module is totally self contained with its own integral PSU and can be configured as part of a central system or as a standalone system.

This module can be fitted along with protection devices in the distribution board or into a cabinet with any other modules. The Metal construction has been designed and built for safety, reliability & serviceability with standard

Specification:• Power Supply: AC 90—240V• Output: Maximal output of each channel is 10A• Protocol: DMX-512/QL-Net• Dimension:215 (W) x 59(H) x 87.5(D)mm• Weight: 800g

Features• Standard DMX-512 signal.• Din rail-mounted. Manual setting available and easy

to operate.• 8 channels dry contact, each can be set as ON/OFF/

AUTO mode individually.• Each channels maximal output can be 10A.• Up to 99 zones synchronization. (99 devices work

together)• Delay time setting (0.1S~10S) for each channel to

avoid current surge.• Connectable to QL series control panels, each of

them can work independently or synchronously.

din rail mountable fixing arrangement. The channel numbers for each output can be configured. After power loss, on restoration the system will restore each channel to the status prior to the power loss.



1 2

46 5

3 Any output of this 4 Channel module can be programmed for “switched mode” or “Phase Dimming” or “Fluorescent Dimming”. The Din rail mountable module is totally self-contained with its own integral PSU and can be configured as part of a central system or as a standalone system. This module can be fitted along with protection devices in the distribution board or into a cabinet with any other modules. The Metal construction has been designed and built for safety, reliability & serviceability with standard din rail mountable fixing arrangement. The channel numbers for each output can be configured.After power loss, on restoration the system will restore each channel to the “last scene selected” prior to the power loss.

Specification:• Power Supply: 90 - 240V AC• Protocol: DMX-512, QL-Net• Output 5A per channel max. Total 12A max.• DMX signal connector: 6P 6C PHONEJACK x 2,

4-pin terminal x 1.• Dimension: 190mm(W) x 88mm(H) x 57mm(D)• Weight: 500g

Features•4 channels output. Each channel includes one

AC OUT power supply for fluorescent lamp and one DC 0-10V for fluorescent lamp dimming. It also can be the dimmer pack for conventional (incandescent) lamps.

•Accept standard DMX-512 signal.•Can set the OFF time for AC OUT power from

1 second to 99 seconds.•Can set the fade time for each scene.•Up to 99 zones setting.•Dinrail Mountable.

1. 0 – 10V DC Output x 6

2. 0 – 10V DC Output Ground x 6

3. 4-pin Pluggable Terminal (external controller)

4. AC Output to Lamps x 4

Bottom view

4 Pin PluggableTerminal

RJ 111. V+ 12V2. Data +3. Data -4. GND

QL 8012

QL 610

Any output of this 8 Channel module can be programmed for “switched mode” or “Phase Dimming”. The Din rail mountable module is totally self contained with its own integral PSU and can be configured as part of a central system or as a standalone system.

This module can be fitted along with protection devices in the distribution board or into a cabinet with any other modules. The Metal construction has been designed and built for safety, reliability & serviceability with standard din rail mountable fixing arrangement. The channel numbers for each output can be configured. After power loss, on restoration the system will restore each channel to the “last scene selected” prior to the power loss.

Any output of this six channel module can be programmed for “switched mode” or “Phase Dimming” or “Fluorescent Dimming”. The module is totally self contained with its own integral PSU and can be configured as part of a central system or as a standalone system.

The module can be fitted with protection devices as required into its own standalone case or into a cabinet with any other modules. The Metal construction has been designed and built for safety, reliability & serviceability with top and bottom keyhole fixing.

Specification:• Power Supply: 90 - 240V AC• Protocol: DMX-512, QL-Net• Output: 5A per channel, total 12A.• Dimension: 215mm(W) x 88mm(H) x 57mm(D)• Weight: 720g

Specification:• Input: AC 90 –240V• Output: Maximum output of each channel is 10A. Total output is 60A.• Protocol: DMX-512, QL-Net• Transmission Rate: 250K BITS / S• DMX Signal Connector: 6P 4C phone jack (external),

4-PIN connector (internal)• Dimension: 300(W) x 340(H) x 120(D) mm

Features• DMX-512/QL-NET(RS-485)• Din-rail mounted.• 8 channels leading-edge (forward phase control)

output.• Each channel can be set as dimming/switch mode.• Up to 99 zones setting.• Connectable to QLCP series control panel.

Features• 5 channels. Maximum output of each channel is 10A•DMX-512/RS-485 interface•C3 dimming curve•30 scenes•Adjustable fade-in/out time•Build-in timer.•Each channel can be set as dimming /non-

dimming/fluorescent•LCD display•Button lock/unlock function•Up to 99 zones.•Can be recalled scene by external controllers or

scene control panels.•Auto current detection.


The channel numbers for each output can be configured manually or by using the central software. After power loss, on restoration the system will restore each channel to the “last scene selected” prior to the power loss.

QL-Scene set

QL- Scene set is a compact six channel dimming module, ideal for conference room/living room in standalone applications.

Specification:• Power Supply: AC 90—240V• Output: 10A per channel, Total 16A• Protocol: DMX-512, QL-Net• Dimension: 212 (W) x 114 (H) x 60 (D)mm• Weight: 800g

Features• 6 channels, total current 16A. maximum output of each

channel can be upto 10A.• The master panel can store 12 groups of scenes, each

scene can store 12 channels, display 12 channels dimming value, and transmit 12 channels data

• Scene Set can recall 6 scenes, change any channel dimming level, and edit 6 scenes directly. You can also view current zone number and set fade in/fade out time.

• C1, C2, C3 liner dimming curve.• Fade-in/fade-out time setting.• Timer control can execute preset lighting scenes

periodically and automatically (24hours).• Each channel can be set as dimming or non-dimming.• Display system temperature and detect temperature

automatically. When the internal temperature is over 62°C, it will alert and limit the output to 50%. Over 65°C it will stop output automatically.

• Temperature display• Display total current. If total current is over 25A, it will

switch off automatically, press any button to restart the system.

• Can be controlled and monitored by PC through QL-NE100 Ethernet interface

• Can be connected to QL-Net series control panels.• Button lock/unlock.

QL-NE100

QL NE100 is an Ethernet to QL-Net Interface. The Din rail mountable module is totally self-contained with its own integral PSU. This module can be fitted along with any other modules.

The Metal construction has been designed and built for safety, reliability and serviceability with standard din rail mountable fixing arrangement. After power loss, on restoration the system will restore each channel to the status prior to the power loss.Up to 128 zones can be controlled by QL-NE100. In scene edit function, there are 7 scenes (scene 1-6 and off) can be programmed for each

Specification:• AC Input: 90 - 240V AC• Protocol: QL-Net (for QLCP panels), DMX-512 (for QL modules)• Dimension: 215mm (W) x 88mm (H) x 57mm (D)• Weight: 600g

Features• QL-Net and DMX-512 compatible.•Up to 128 zones.•QLCP panels compatible.•Built-in timer and astronomical timer.•Programmable by web-based applications.

zone. Each channel in a scene can be set from 0% to 100% or No Control(NC). By setting the level as NC, QL-NE100 is able to make each zone independent from each other zones.

7

QL PCA-1 QL PCA-1 is a HVAC control module. The Din rail mountable module is totally self-contained with its own integral PSU and can be configured as part of a central system or as a standalone system. The Metal construction has been designed and built for safety, reliability and serviceability with standard din rail mountable fixing arrangement. The channel numbers for each output can be configured. After power loss, on restoration the system will restore each channel to the status prior to the power loss.

Specification:• Power Input: AC 100-240V / 50Hz-60Hz• Digital Signal InputDMX-512/QL-NET(RS-485)• Digital Signal Connector: 4Pin green terminal• Installation: Din-rail mounted• Dimension 144 (W) x 88 (H) x 57 (D) mm• Weight: 400g

Features• Control HVAC device.• QL AC4 compatible.• 6 scenes and 1 off scene.

QL-CC01

QL CC01 is a curtain control module. The Din rail mountable module is totally self-contained with its own integral PSU and can be configured as part of a central system or as a standalone system. The Metal construction has been designed and built for safety, reliability & serviceability with standard din rail mountable fixing arrangement. The channel numbers for each output can be configured. After power loss, on restoration the system will restore each channel to the status prior to the power loss.

Specification:• Power Input: AC 100-240V / 50Hz-60Hz• Digital Signal InputDMX-512/QL-NET(RS-485)• Installation: Din-rail mounted• Dimension108 (W) x 88 (H) x 57 (D) mm• Weight: 300g

Features• DMX-512/QL-NET(RS-485)• QLCP panels compatible.• 6 scenes and 1 off scene.

1

2

3

4 6

7

8

9

5

2. LED Screen1. AC Input

3. [DMX], [FCN], , ,

4, 5, 6 : DMX/QL-NET Connectors7, 8 : Curtain up/down indicators9. Curtain Output

, , Buttons

2. LED Screen1. AC Input

3. [DMX], [FCN], , ,

5. Fan: off/low/medium/high buttons6 DMX/QL-NET Connectors

4, Cool/Heat buttons

7. Cool/heat Output8. Fan off/low/medium/high output

, , ButtonsH C

OFF , LOW , MED , HIGH,

ACCESSORIES

QL-105 R

QL 102 E

QL 105 R is an RS485 signal Isolator. The module is totally self-contained with its own integral PSU and can be configured as part of a central system. The Metal construction has been designed and built for safety, reliability and serviceability with top and bottom key hole fixing.

QL102E Provides RS232 Interface between the various QL series dimming/switching modules and third party systems like BMS, A/V etc, The metal construction has been designed and built for safety, reliablity and serviceablity with top and bottom keyhole fixing.

Specification:• Power supply:DC 12V ( the power is taken from QL-Net bus)• Protocol: RS-485• Signal connector:4 pin green terminal x 2• Dimension: 66( W ) x 54( H ) x 23( D ) mm• Weight:128 g

Specification:• Power Supply:DC 12V• Signal Input RS-232 (DB9 connector, the package includes one

connect wire )• Signal Output QDX 4pin green terminal , RJ11*2• Dimension 132W;76H;36.2(D)mm• Weight ; 0.22Kg

Features• Isolate RS-485 signal.• Extend signal transmission distance.

(1000m, in theory )

Features• Exchange the data between PC and

Dimming system.• Compatible with standalone system or centralized

control system. It can control the dimming system through standard RS232 interface.

• Connectable to PC by RS-232 cable.

1. 4pin green terminalRS-485 port (supply the power to QL-105R, DC 12V)

2. 4pin green terminalRS-485 port

12

9

QL PS 1202

QL 305A

QL PS 1202 is a Power supply module for powering the QL-Net control bus.

Specification:• AC Input: 90 – 240V• DC Output: 12V, 2A Max• Dimension: 90(W) x 88 (H) x 57 (D) mm• Weight: 310g

QL 305A is a 3 channel DMX LED dimmer pack. The module is totally self contained with its own integral PSU and can be configured as part of a central system. The Metal construction has been designed and built for safety, reliability & serviceability with top and bottom key hole fixing.

Specification:• Power Supply: 12-36V DC • Output: 5A, each channel • Protocol: DMX-512/RS-485 • Transmission Rate: 250K bps • Signal connector: 3PIN green terminal • Dimension: 228(W) X 60(H) X 40 (D) mm • Weight: 300 g

Features• 3 channels. • Module design. • Accept standard DMX512 control. • LED screen for easy operation. • Accept IR remote control. • Accept QL Net series control panel

Our Products are robust in design ensuring your peace of mind

11

QL 1025

QL S8

QL 1025 is LED Dimmable driver, Most LED dimmers are subject to flicker when output level is under 10%. Therefore, the dimmable inputs of most LED dimmers are 1 – 10V DC rather than 0 – 10V DC, or LEDs will be flickering when dimmable input is under 1V (10%). QL-1025 is a constant voltage LED dimmable driver with adjustable voltage output from 9V to 28V and with current limit functionality from 100mA to 2000mA , making it suitable for most LED applications. Controlling by an external 0 – 10 V analog signal, QL-1025’s PWM control is the key of its precise dimming output. The most distinct advantage is that the output to LEDs is filtered as DC, which ensures no flickering even at the lowest dimming level.

Specification:• Power: 90 - 240V AC • Output: 9 - 28V DC, 2.0A max • Control input : 0—10 V DC ( Analog )

Features• High flexibility by adjustable DC output (9V - 28V). • Precise 0 - 100% dimming effect, no flickering even

in the lowest dimming level. • Current limit adjustable (100mA – 2000mA).

QL S8 Provides Programmable switch Interface between the various QL series dimming / switching modules, The metal construction has been designed and built for safety, reliablity & serviceablity, Dinrail mountable module.

Specification:• Power supply: DC-12V 200mA (supply by QL-net 4pin green

terminal)• Protocol:RS-485 • Signal input connector :4 PIN green terminal /PHONE JACK • Signal output connector:18PIN green terminal • Signal output channel8 channels • Dimension100(W)*76(H)*35 (D)mm • Weight220g

Features• 8 channels. Can connect to 8 dry contacts. • Each dry contact has two modes: scene

or channel mode. • Can set dry contact’s working period.

(The dry contact works only within this period.)• Can set dry contact’s delay time. In scene mode,

after a scene was call out it will automatically call out another scene or the OFF scene after delay time; in channel mode, after a channel was switch on, it will automatically switch on another channel or switch the channel off after delay time.

• LCD display and easy operation• Portable and user-friendly.

We help in creating the perfect mood

13

USER INTERFACE

QL-CP 106

QLCP-G201

QL-CP 106 is a Push Button control plate, which is available in a wide range of finishes with either 6 scenes plus off , raise and lower selection with LED indicators or 1 upto 4 On/Off selection switching. Push button plates are available in a screw less clip-on construction with

06 Scene Glass control plates Touch type are available in a white and black finishes with a 6 scenes plus off , raise & lower selection with LED indicators. All plates flush mount into a standard MK891 back box, The control plates can receive infrared signals from remote controller to recall the scenes and adjust dimming level.

Specification:• IR receiver.» Protocol : QL-NET (RS-485)» Connector : 4 pin green terminal» Dimension : 86(W) X 86(H) X 34.6(D)mm» Weight : 100 g

Specification:• Protocol : QL-NET (RS-485)• Connector : 4 pin green terminal• Dimension : 86(W) X 86(H) X 34.6(D)mm• Weight : 100 g

Features• In multi-zone mode, one QL-CP106 can

control 8 zones.• In single zone mode, one QL-CP106 can set up to

255 zones by the DIP switch.• Press [1.....6] number key buttons from control panel

to directly recall 6 scenes.• Press or to raise and lower the dimming level.• In curtain control mode,[5&6] number key button

can be used for open and close control of the curtains/blinds.

• 256 level dimming resolutions.• Key Lock /unlock function.

Features• In multi-zone mode, one QLCP-G201 can

control 8 zones.• In single zone mode, one QLCP-G201 can set up to

255 zones by the DIP switch.• Press [1.....6] of number key from control panel to

directly recall 6 scenes.• Press or to fine adjust the dimming level.• 256 level dimming resolutions.• Key Lock /unlock function.• IR receiver.• The built-in photo sensor can automatically

adjust the backlight of QLCP-G201 by the level of ambient light.

• Can connect to 2 dry contacts. (I/O)

Silver, Gold, White face plate finishes. All plates flush mount into a standard MK891 back box. The control plates can receive infrared signals from remote controller to recall the scenes adjust dimming level or switch circuits.

QLCP-T301

QL AC4

QL AC-4 is a HVAC control device (Digital Thermostat). The wall mountable module is totally self contained with its own integral PSU. The construction has been designed and built for safety, reliability and serviceability with standard single gang plate arrangement. The channel numbers for each output can be configured. After power loss, on restoration the system will restore each channel to the status prior to the power loss.

Specification:• Power supply DC 12V• QL-Net (RS-485) & QL-net

Terminal - 4 pin green terminal• QL-Net Terminal - 4 pin green terminal• Connection Port - USB/LAN• RAM Memory - 256MB• Screen Size - 5.7inch• Resolution - 324 x 240 PX• Colour - 262K Colours• Screen - 4 wire resistive touch panel• Size 215(W)x140(H)x 39(D)cm

Specification:• ProtocolQL-NET (RS-485)• Connector4 pin green terminal• Dimension86(W) X 86(H) X 34.6(D)mm• Weight: 110g

Features• Programming software to realize customized

operation interface.• USB port for LAN connection, data download and

remote monitoring.• Build-in function include backlight setting, sound

setting, clock setting, digital photoframe and password protection.

• Build-in loudspeaker.• Accept IR remote controller control.

Features• Control HVAC devices through QL-NE100

and QL-PCA1.

Front View Rear View

15

1 USB port 3 QL-Net port

2 LAN port 4 Spare port

QL-DMX Console

QL TABLET PC

QL DMX Console is designed for dimming control of Colour Changing LED Lights, especially for Stage/Theatre/Auditorium lighting applications, having a 96 set of scenes preset . The construction has been designed and built for safety, reliability & serviceability with Table top arrangements. The channel numbers for each output can be configured. After power loss, on restoration the system will restore each channel to the status prior to the power loss.

Qlite offers latest state of the art Tablet PC with 7 inch touchscreen, powered by Android 2.2 OS. It comes pre-loaded with Control app providing you complete control of the installed system in your hands.

The tablet PC communicates with the system ethernet interface unit QL NE100 via a wifi router to provide complete system control and monitoring facility to the user. Introduction: Qlite offers latest state of the art Tablet PC with 7 inch touchscreen, powered by Android 2.2 OS. It comes pre-loaded with Control app providing you complete control of the installed system in your hands.

Specification:• Input: AC 90 –240V,45-63Hz• Digital control signal input / output - DMX512 / 1990• Digital control channel - 512channel by PATCH able to control

CH 97 – CH 512• Digital control connector - XLR 5-pin, XLR 3-pin, RJ11• Audio input - Internal microphone MAX 120dB output max. value

:AC 100mV• Gooseneck connector stand - XLR 3 -pin, DC +12V 250mA• Memory card - 64K*2• Dimension - 19” 8U standard rack 482(w) x 352(h)x125(d)mm• Weight - 5Kg

Features• Digital signal output• 96 control channel, and able to control up to

CH97 – CH512 by patch• 4 set of PATCH editing function• 96 set of scenes pre-set (24 set of scenes able to save

on every single page function)• 24 set of chase preset• Up to 64 scene step on each chase setting• 2 set of individual control stick for scenes change

(CROSS FADE)• Audio control available• output external memory card saving / loading

(option )

CPU : iMAOx210 800MHz (ARM11)OS : Android 2.2RAM : 256MB DDR2Display Type : 7.0” Touch screen TFT LCDDisplay Resolution : 800 x 480 (WVGA-16:9 wide screen)Touch : ResistiveLAN : n/aWLAN : WiFi 802.11 b/gUSB Port : USB 2.0Power : AC 100-240VAC INPUT, DC 9V/1.5A Adapter

Dimming & Lighting Control System Overview

In Standalone configuration, typically for restaurants, conference rooms, ball romms etc, the dimming/lighting control system shall have the dimming and/or lighting control modules, directly connected to the user interface i.e., control plate, touch screen, as per requirement.

In centralised configuration, typically for Hotels, large commercial complex etc, the Dimming/Lighting control system covers a number of floors/areas which are linked together and can be controlled from a central location.

In this configuration, the dimming and/or lighting control modules as well as the control devices in each floor/area are separately looped to a common ethernet interface module. This ethernet interface module provides ethernet LAN connectivity to the nearest available ethernet switch, which is typically part of ethernet backbone of the building. The central PC connects to the nearest eternet LAN switch and can be used for centralised control, monitoring and configuration of the entire dimming & lighting system.

Control Devices as per system requirement ProgrammableSwitch Interface(For 3rd Party

Devices)

Dimming/LightingControl Panel




Shielded two pair twisted cable

Control Devices as per system requirement




EthernetInterface

EthernetInterface

EthernetInterface

Ethe

rnet

LAN

Ethe

rnet

LAN

ProgrammableSwitch Interface(For 3rd Party

Devices)


Devices)


Devices)


RS232 A/VInterface

Standalone configuration

Centralised configuration

EUROPE HEADQUARTERS: Qlite LimitedWyastone Business ParkMonmouth, NP25 3SRUnited KingdomTel: +44 (0) 1600 772297Fax: +44 (0) 1600 551197Email: [email protected]

ASIA & PACIFIC HEADQUARTERS: Qlite Electronics Controls P. LtdNo. 16, Prestige Elgin25th Main Jayanagar 9th Block, Bangalore, IndiaTel: +91 80 26636611Fax: +91 80 26636611Email: [email protected]

MIDDLE EAST & AFRICAHEADQUARTERS:P.O. Box 1858, Manama Kingdom of BahrainTel: +973 13654045Fax: +973 13654035Email: [email protected]

europe headquarters: fax: +44 (0) 1600 551197 email:...

Documents