etx-203ax, etx-203am and etx-205a product introduction, ver. 4.03 ga january 2013
DESCRIPTION
ETX-203AX, ETX-203AM and ETX-205A Product Introduction, Ver. 4.03 GA January 2013. Agenda. Introduction Product overview Target customers and Applications Main features Management Ordering information Value proposition. ETX Portfolio. Performance. ETX-5300A. ETX-220A. ETX-205A. - PowerPoint PPT PresentationTRANSCRIPT
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 1
ETX-203AX, ETX-203AM and ETX-205AProduct Introduction, Ver. 4.03 GAJanuary 2013
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 2
Agenda
• Introduction• Product overview• Target customers and Applications • Main features• Management• Ordering information• Value proposition
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 3
ETX PortfolioPerformance
Scale
Ethernet Service Aggregation Platform
1/10GE Interfaces10GE NTU10GE Ring
ETX-220A
ETX-5300A
nxGE nx10GEGE
High End EDDAdvanced TM
HW based OAM
High End MDDAdvanced timing
Circuit emulation Services
ETX-203AX/AM
ETX-205A
ETX-204ABasic NTU
Flow based Service
MiNID
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 4
2G, 3G, 4G LTE eNB
E1
GE
Intelligent Demarcation Solutions
Solution benefits• Increased revenues with differentiated Ethernet services and TDM circuit emulation• Accurate and scalable SLA assurance• Same service offering over multiple access technologies• Painless integration and operation – simple provisioning and network management• Variety of units and ordering options for cost optimization
IP DSLAMCustomer HQ
ServiceProvider Network
FE/GbE
Customer Premises
FE/GbE
RNC/4G Gateway
RADview – EMS & Service Center
ETX-203AX
SLA Assurance, PM management, Resiliency
1/10GbE
GbE
ETX-220A
1/10GbEETX-5300A
SHDSLETX-203AM
ETX-205A
ETX-205A
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 5
Access and Aggregation Network
1/10 GbE G.8032Rings*
10 GbE
IP/MPLS
PE
1 GbE
10 GbE
1 GbE
ETX-2xx
ETX-2xx
ETX-5300A
ETX-220A
ETX-2xx
ETX-203AM
TDM
ETX-5300A
STM-1
Solution’s Benefits:• End to end solution• MEF CE 2.0 certified
– Advanced Traffic Management– Complete Ethernet OAM suite
• Carrier grade protection* Note – Ring in ETX2xxA is part of version 4.5 (SW upgrade from version 4.3)
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 6
Mobile Backhaul solution
IP/MPLS
PEPE10 GbE
ETX-205A
GbEETX-220A
ETX-205A10 GbE10 GbE
RouterMME ETX-5300A
G.8032v2 *
ETX-5300A
RAD Access solution for MobileTiming feeder
ETX-205A
ETX-205AETX-205A
Solution’s Benefits • Accurate and scalable SLA measurement• Seamless migration from TDM to packet
• Grooming and aggregation of Ethernet and TDM circuits
• Hybrid synchronization - SyncE and IEEE1588v2 for best timing performance
* Note – Ring in ETX2xxA is part of version 4.5 (SW upgrade from version 4.3)
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 7
Product Overview
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 9
RAD CPE demarcation devices
• Cost optimized for business Ethernet services
ETX-203AX – 6 port cost effective EDD
• Modular uplink for lower OPEX• Flexible for future technologies
ETX-203AM –6 port “All-In-One” platform
• 6 combo ports • Full Synchronization (19”)• E1/T1 circuit emulation
ETX-205A – high end EDD and MDD
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 10
ETX-203AX Product Introduction
• Fixed Carrier Ethernet Demarcation Device for:
– SLA-based retail and wholesale Ethernet services • Flexible port selections:
– 1 or 2 FE/GE network ports: SFP based– 4 or 5 FE/GE user ports: SFP or UTP
• Carrier grade design– Service and port level redundancy
• Cost effective design– Unique AC and DC PS, reducing inventory
• MEF CE 2.0 compliant EPL and EVPL Ethernet services
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 11
ETX-203AX Physical View
Network and User Interfaces1 or 2 network SFP interfaces (redundancy) Up to 4 or 5 user ports
ManagementOut of Band FE portLocal RS-232
PowerWide-range AC&DC PS
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 12
ETX-203AM Product Introduction
• Modular Carrier Ethernet Demarcation Device for:
– SLA-based retail and wholesale Ethernetservices
– Uniform service offering over Copper, Fiberand SHDSL access networks
• Flexible port selections: – Modular based network ports
• 2 GbE combo interfaces: SFP/UTP• 4 or 8 wire SHDSL uplink module
– 4 FE/GE user ports: SFP or UTP• Carrier grade design
– Service and port level redundancy• MEF CE 2.0 compliant EPL and EVPL Ethernet services
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 13
ETX-203AM Physical View
FE/GbE Combo port uplink module
2 x 10/100/1000BT 2 x 100/1000Fx (SFP)
SHDSL EFM uplink module
– 4wire – 11.4 Mbps– 8wire – 22.8 Mbps
Ethernet over PDH uplink module*
– 4/8xE1/T1– 1/2xT3
GFP/VCAT/LCAS
* Module available in version 4.5
ManagementOut of Band FE portLocal RS-232
User interfaces: 4 FE/GE interfacesSFP or UTP
Modular UplinkETHSHDSLETH Over PDH/SDH
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 14
• Modular design advantages:– Service uniformity across network technologies– Management integration– Smooth migration from copper for fiber– Reduced inventory for lower OPEX– Shorter training and expertise
ETX-203AM - All-In-One
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 15
ETX-205A Product Introduction
• Advanced Carrier EthernetDemarcation Device for:
– SLA-based retail and wholesale Ethernet services – 2G/3G/4G-LTE Mobile backhauling demarcation– Migration to packet networks with integrated Ethernet and E1/T1 services
• Carrier-grade design– Service and port level redundancy– Redundant power supplies
• SyncToP™ synchronization combining:– Synchronous Ethernet– IEEE-1588v2 PTP Slave and Transparent Clock
• MEF CE 2.0 compliant EPL and EVPL Ethernet services
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 16
ETX-205A Physical View
Management ports•Out of band - Ethernet port•Local craft terminal - RS-232
SyntTop™ synchronization ports:•External in/out (T3/T4)• 1PPS and ToD
6 FE/GE combo interfaces:•2 Network ports•4 User ports
Redundant power supplies:•AC: 100–240VAC, 50-60Hz•DC: 24/48VDC
19”, 1RU shelf, Rack and wall mount
Environmentally Hardened Option: -20 to +65C
4 E1/T1 PWE interfaces:• CESoPSN and SAToP• UPD/IP and MEF8• Flexible and accurate timing
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 17
ETX version 4.3 Main Features
• Unified feature list for ETX-203AX, ETX-203AM and ETX-205A• Enhanced OAM capabilities (MIP on double-tagged traffic,
Classification per “My MAC/IP”, permanent loopbacks)
General features
• Unified Carrier Ethernet services over copper and fiber networks• Lower OPEX reduces total cost of ownership
ETX-203AM platform
• Integrated TDM over Packet - 4 E1/T1 ports (RJ-45)• 1588v2 – frequency, phase and performance analysis• Hybrid Synchronization for best timing accuracy – SyncE for
frequency and 1588v2 for phase
New ETX-205A options
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 18
Target Customers and Applications
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 19
Carrier Ethernet Market Segments
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 20
• Managed CPE with Fiber and copper uplinks• L2 access solution supporting:
– L2 based office interconnections– L2 access to L3 VPN– Access to ISP
• Flow-based differentiated services
– Up to 8 classes of service• SLA assurance with shaping
per EVC and EVC.CoS
Retail Business Services
GbE
Service Provider Network
ISP
Customer Premises
ETX-203AXETX-203AM
ETX-203AM
FE/GbE
EoSHDSLGbE
ETX-205A
Customer HQETX-205A
RADview-EMS & Service Center
IP DSLAM
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 21
Wholesale Services
• Managed demarcation point at customer premises• Accurate SLA enforcement and measurement with HW based OAM tools• Multiple transport connections with flow-based services
– EPL and EVPL connection models with per flow shaping• Differentiated services for reliable overbooking• E1/T1 Leased line replacement
Service Provider Network
Customer Premises
ETX-203AMSHDSL
GbE
Customer HQ
ETX-205A
ISP
RNC/4GGateway ETX-205A
WholesalePacket
NetworkPE
PE
ETX-203AXETX-203AM
ETX-205AGbE NxE1
NxE1
IP DSLAMWSPTN
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 22
ETH
Mobile Demarcation with ETX-205A
• Mobile Demarcation Device – Timing Gateway & Demarcation• Per-flow SLA measurements• Multiple synchronization over packet standards • Support for legacy Cellular generations
Transport Network:ETH/IP/MPLS
PoP Site
RNC/4G Gateway
Sync-E
IEEE 1588-2008 (1588v2)
Clock recovery based on 1588-2008 or Synchronous Ethernet
External ClockSource
Sync-E ClockSource
IEEE 1588-2008Grandmaster Clock TC
PEPE
ETX
IP Node B
ETH
ETX
IP Node B
ETHIP Node B
BTSNxE1/T1
ETX
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 23
Main Features
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 24
Carrier Ethernet NetworkCECE UNIUNI
CECEUNIUNI
CECE
UNIUNI
UNIUNI
Point-to-Point EVC
Connectivity Options with ETX
• E-Line: point-to-point– Each EVC connects two or more UNIs– Replaces a TDM Private line (EPL)– Replaces ATM and FR (EVPL)
• E-Tree: point-to-multi point– Point to multipoint connectivity -
Internet access and/or IP TV services– No connection between leafs
• E-LAN: any-to-any – Single bridge instance per UNI (EPLAN)– Several (virtual) bridge instances per UNI
(EPLAN)
Carrier Ethernet NetworkCECE
UNIUNIUNIUNI
CECEUNIUNI
CECEPoint-to-Multipoint EVC
Carrier Ethernet NetworkCECE
UNIUNI
UNIUNI
UNIUNI
CECEUNIUNI
CECEAny-to-any EVC
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 25
ETX Traffic Management
• Extremely flexible classification:– Port, VLAN-ID, P-bit, TOS-DSCP, EtherType, MAC SA/DA and IP SA/DA
• Hierarchical-QoS (HQOS) with flow level TM:– CIR/EIR Policing per flow for differentiated services – Assuring SLA in congested links - shaping per EVC or EVC.cos– Up to 8 queues per flow with Strict Priority and WFQ scheduling– Simplifying operation with powerful bandwidth profiles
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 26
The value of advanced TM
• Increased revenues using ‘Intelligent’ over subscription
– Multiple services from same port - EVC– Higher bandwidth utilization - EIR– Better utilization of network resources
allows• Maintain customer satisfaction with
differentiated services– Different Drop probability, delay and
jitter at different cost• Reduce churn by ensuring SLA
– Per service shaping ensures bandwidth per customer (EVC, EVC.CoS)
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 27
Robust Service ManagementEthernet OAM
Summary of available Ethernet OAM mechanismsHardware
OAM
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 28
Hardware OAM vs. Software OAM
Feature Software OAM
Hardware OAM
Benefits of Hardware-Powered OAM
OAM agility X √ OAM rate only limited by line speed
Multi-flow monitoring X √ Monitor multiple concurrent flows simultaneously (large number of MEPs)
Fast detection of connectivity failure X √ Fast failure restoration <50msec
Measurements of real frames as well as synthetic frames
X √ Detects loss of even a single frame
Accurate measurement of delay and delay variation X √
Provides accurate FD/FDV measurements (nano second resolution)
Loopback at line rate X √ Allow line rate loopback for all MTU sizes, plus PRBS support
MIP Support X √Fully participate as a maintenance intermediate point (MIP) between MEPs
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 29
Ethernet OAM features
• Standard CFM OAM per 802.1ag-D8: – End-to-end OAM for Continuity Check
• Continuous; 3 msec to 10 sec intervals– Loopback (non intrusive) – On demand/permanaet
• Simplified configuration per “My MAC” and “My IP”– Link Trace – On demand– Fault propagation based on CFM OAM Messages
• 802.3ah Active mode– Recognize and propagate “Dying gasp” messages from remote device notifying the operator of
CPE failure– Allows remote devices to be managed through user port
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 30
Ethernet OAM – PM
• Performance Monitoring defined per service (EVC+CoS)• Allows for in-service, end-to-end SLA monitoring of:
– Frame Delay– Frame Delay Variation– Frame Loss– Availability
• Configurable performance objectives inline with SLA for:– Proactive end-to-end SLA monitoring– On going statistics– Traps upon SLA objectives crossing
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 31
One-way delay measurement
• One way delay measurement based on 1588v2– Accurate and reliable results
• Carriers can assure their committed KPI• Customers can measure conformance to carrier KPI
WholesalePacket Network
Service Provider L2/L3/MPLS
Network
ETX-205A/PTP
ETX-205A/PTP
Customer Premises
CO
PE
ETX-205A/PTP
Accurate one-way delay measurement based on 1588v2 time stamping
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 32
Fault management - Loopback Options for Service Verification
• Network troubleshooting and throughput testing:– Simultaneous loopbacks of many flows on both network and user sides– Flexible criteria, per service and CoS (EVC.cos)– Non-Intrusive “always on” operation with no need to configure the remote
end– Line rate performance
• L2 and L3 loopbacks– MAC & IP Address swapping– Multiple independent SLA monitoring and test instances per unit
Network
“Loopback packets which have VID 100 & IP SA 117.155.160.13 + perform IP & MAC swap”
“Send a packet with VID 100 and IP SA 117.155.160.13 12 and wait for a reply
TesterTester
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 33
PEEVC
Real Time
Best Effort
UNI
PSNEVC 1
EVC 2
Branch A
Headquarters Real Time
Priority Data
Best Effort
UNI
PE
EVC
Branch B
Real Time
Priority Data
Best Effort
Priority Data
Real Time
Priority Data
Best Effort
ETX
IP DSLAM
Traffic Generation and loopback per RFC-2544
RFC-2544 Measurements to Ensure Service Parameters
• Used before service is commissioned to ensure service parameters• Measures Latency, Loss and Throughput• Up to 8 sessions simultaneously
ETX
ETX
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 34
RFC-2544 standard enhancements
• Configurable test duration - from 2 to 60 minutes • Binding tests to flows for service oriented bandwidth configuration• Combination of standard and user configurable frame size to verify data
integrity• Text and graphical result views
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 35
RFC-2544 CLI reportsTest ID : <ID> Tested by : User NameProduct Name : <HW product name and version>Version Number : <firmware name and version>Serial Number : <serial number here >Date & Time : <Test time, format: day, dd/mm/yy hh:mm:sec>Profile Name : <e.g. - RFC 2544 Throughput Test - Per Port Binary Search>Number of Trials : < number of trials> Test Duration : <hh:mm:ss>
Test Parameters------------------------------------------------------------------------------------------------------------- Bind: MD:<MD id>, MA <MA id>, MEP <MEP id>, p-bit <pbit>, VLAN <vlan> Maximum Theoretical Rate: <Maximal defined Rate> [FPS] Duration: <Duration> Pattern: <Frame Pattern>, Frame Type <frame type> Opcode <Opcode>, mode <mode>Search resolution <Search resolution>, Tolerance <tolerance>, Trials <Number of trials>Learning Frames: Number of frames <number of frames>, Frequency <Frequency>
Throughput Report< Trial #>:========
Status: SUCCESS { or FAIL – Link down, OAM connectivity failure } Duration: <HH:MM:SS>
Frame Size [bytes] | 64 | 128 | 256 | 512 | 1024 | 1280 | 1518 | Theoretical maximum [fps] |10000 | 5000 | 2500 | 1250 | - | - | 500 |Throughput [fps] |9500 | 4900 | 2490 | 1250 | - | - | 500 | success [%] | 95 | 98 | 99.6 | 100 | - | - | 100 |
Packet Loss report:<Trial #>=============Status: SUCCESSFrame Size <64>Maximum theoretical rate <10000>Throughput of max | 100% | 90% | 80% | 70% | 60% |%success | 80% | 87% | 93% | 99% | 100% |
Latency Report< Trial #>:========Status: SUCCESS { or FAIL – Link down, OAM connectivity failure } Duration: <HH:MM:SS>Frame Size [bytes] | 64 | 128 | 256 | 512 | 1024 | 1280 | 1518 | Latency [ms] |50 | 45 | 42 | 37 | - | - | 24 |
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 36
RFC-2544 Reports on RADview
Frame loss
DelayMeasurementThroughput
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 37
Service Management Summary: Managing the Service Lifecycle
Connectivity Verification
• Ethernet OAM - 802.1ag • Continuity Check• MAC Ping
Diagnostic Loopbacks
• Loopbacks• L1 physical interface loopback• L2/L3 Loopback per flow with
MAC/IP swap (up to line rate)
SLA VerificationTesting
• RFC-2544 based tests• Throughput, Loss and Delay
tests• Data integrity tests (BERT)• Delay Measurement
Performance Monitoring
• Ethernet OAM – Y.1731• Frame Delay, Frame Delay,
Frame Loss• Service availability (G.826)
SLA Threshold Reporting
• Defining SLA objectives and proactively notified when crossed
• Alarms and traps on management system
Statistics Collection Reporting
• Collecting SLA statistics • Statistics collection via SNMP or
FTP• Statistics can be used to
generate SLA reports
Fault Detection & Isolation
• Ethernet OAM – 802.1ag• Continuity Check• Loopback• Link Trace
Fault Propagation & Notification
• Ethernet OAM – Y.1731• Per EVC ‘Forward’ and ‘Backward ’
Alarm Propagation (AIS and RDI) • Dying Gasp indication to active - 802.3ah • Per port Alarm Propagation
Resiliency & Repair
• Linear Protection ( “EVC Protection”) -G.8031
• Ethernet Ring Protection - G.8032• port protection based on Link Aggregation -
802.3 (formerly 802.3ad)
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 38
Link Protection
• Link Aggregation Redundancy (802.3ad based)– Redundant connection to a single upstream device via two ports which
form a singe logical port– Link Aggregation Control protocol used to sync LAG members and identify
failures
• Dual homing – 1:1 connectivity to two different upstream devices for node redundancy
• Switch criteria:– Loss Of Signal (LOS) indication– Manual commands
CPE
PSN
Dual homing
PSN
Single homing
CPE
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 39
Ethernet Linear Protection based on G.8031
• Protection as per ITU-T G.8031– Bidirectional 1:1 mode using APS messages
• Triggers - Port Signal loss, CCM LOC, ETH-AIS • Protection time
– Under 50ms protection time for a single protection group (multiple EVC per group)
– Up to 200ms protection time for 4 protection groups
Remote Customer Premises
Local Customer Premises
NTUCPEEthernet
RDI on CC message1 CC OAMCC OAM
CC OAMCC OAM
Automatic Protection Switching (APS)
PE NTU
2
CPEPE
Automatic Protection Switching (APS)
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 40
Fault PropagationBased on OAM Loss Of Connectivity
• Network failure propagation to user ports– User ports are turned off upon Loss-of Connectivity (LOC) or Remote
Defect Indication (RDI)• Customer equipment senses the failure and immediately reroutes to
alternative path– Shortens restoration time by triggering restoration much faster
than native routing protocols
Remote Customer Premises
Local Customer Premises
NTUCPEEthernet
RDI on CC message1 CC OAMCC OAM
CC OAMCC OAM
State LOCReceive RDI
PE NTU
2
CPEPE
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 41
Fault Propagation Based on OAM Remote User Failure
Remote Customer Premises
Local Customer Premises
NTUCPEEthernet
1 CC OAMCC OAM
CC OAMCC OAMPE NTU
2
CPEPE
• User port failure propagation to remote end:– Remote end port is turned off upon alarm indication from local end
• Customer equipment senses the failure and immediately reroutes to alternative path– Shortens restoration time by triggering restoration much
faster than native routing protocols
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 42
Layer 2 Protocol Tunneling (L2PT)
• Allowing full transparency to L2 control Protocols using different configurations:– Peer-supported L2 Protocols Data Units (PDU) frames– Discard the L2 control protocol frames– Tunnel: Pass through Layer-2 control frames– Including Vendor Specific L2CP frames
Remote Customer Premises
Local Customer Premises
NTUCPE Ethernet
1
PE NTU
2
CPEPEL2 PDUL2 PDU L2 PDUL2 PDU
[Eran:]
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 43
Integrated E1/T1 Circuit Emulation
Legacy Service Pseudowire Circuit Emulation Legacy Service
ETX-205A
Carrier Ethernet and IP/MPLS
PW Tunnel
NxE1/T1
NxE1/T1
• 4 Framed or unframed E1/T1:– Unframed E1/T1 with SATOP– nxDS0 circuits with CESoPSN
• 16 PWE per port (for CESoPSN)
• Traverses IP-MPLS and Carrier Ethernet networks:
– UDP/IP encapsulation– MEF8 (CESoETH) encapsulation
• Clock performance– Jitter and wander per G.823/G.824– Frequency accuracy better than 16 PPB
• Diverse clocking options– Adaptive Clock Recovery (ACR) independent
of network timing– Loopback Timing – transmit by Rx timing– System clock: derived from SyncE,
IEEE1588v2 and BITS-IN interface
ETX-205APW Tunnel
NxE1/T1
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 44
Zero-Touch Provisioning
• Simplifies installation and device replacement:– DHCP Client acquires address from centrally-managed server– Automatic association with FTP server
• Central configuration management via TFTP/SFTP– Automatic association with network management
• Enables Auto-discovery by NMS
CPE
PSN
DHCPServer
NMS and FTP Server
ETX w/DHCPClient
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 45
Synchronization in ETX-205A
Physical Interface Functionality
RJ-45 (EXT-CLK) T3/T4 Clock E1 or T1 or 2 Mhz
Mini-BNC (EXT-CLK) Clock out 2 MHz and 2Mbps
Mini-BNC (1 PPS) 1 PPS output or input configurable
RJ-45 (ToD/1PPS) 1PPS in or out configurableTOD Rx & Tx (HW ready)
• Simultaneous support of Synchronous Ethernet (SyncE) and IEEE-1588v2 Precision Time Protocol
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 46
Synchronous Ethernet (Sync-E)
• Synchronization derived from physical layer – best performance• Supported on all Ethernet ports:
– GbE and FE rates– Optical and Copper interfaces
• Full support as per G.8261 and G.8262 • Clock redundancy via clock selection mechanism (primary and secondary) as per
G.871– Stratum 3 or 3E holdover – allows up to 4 ppb per day
• Support of ESSM messages – To choose in case of more than one clock source
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 47
IEEE 1588v2 Support
• 1588v2 provides clock distribution over any packet network
– Accurate timing - frequency lock ±16ppb
• 1588v2 slave for phase and frequency • 1588v2 encapsulation over IP\UDP with telecom profile
ETX
ETH
Transport Network:
ETH/IP/MPLS
PoP Site
RNC/4G GW
Sync-E
IEEE 1588-2008 (1588v2)
PE PE
Clock recovery based on 1588-2008 or Synchronous Ethernet
IP NodeB
IEEE 1588-2008Grandmaster Clock
TC
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 48
Management
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 49
RADview-EMS Key Features & Benefits
GUI vs CLI Network Inventory and Discovery
Performance Management and SLA
Intuitive GUI, visual Topology, Visual status indication , data validation.Saves 50% time in configurations
Real time device inventory, location, port count.CAPEX saving and capacity planning
SLA Assurance SystemReal time PM, utilization and threshold management.Premium services , trending and analysis
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 50
RADview-EMS Key Features & Benefits
Fault Management Zero-touch Job Automation
Active and History alarms, correlation to customer and services. Easy fault localization, cuts network troubleshooting to half
Automatic device configuration upon its connection to the network. OPEX savings
Automation of network backup, mass configuration update and software update for easy network maintenance
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 51
ETX Management Capabilities
• Local management via management interfaces:– RS-232 DCE– Dedicated out-of-band (OOB) management port
• Remote management via network or user port using:– Telnet SSH – SNMPv3 based management system
• RADView NMS (version 3.10)• Command Line Interface (CLI)
– Easily apply scripts of commonly used commands – Easily apply them to multiple units
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 52
ETX Management Features
• Trap Synchronization preventing loss of traps• Security ensuring communication privacy user authentication
– SNMPv3– RADIUS (client authentication)– TACACS+ (client authentication)– SSH for Secure Shell communication session
• Syslog used for logging system events• SFTP and TFTP for enabling different levels of file transfer security
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 53
Ordering Information
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 54
ETX-203AX Ordering Information
Model Description
ETX-203AX/2SFP/4UTP 6 FE ports (2 SFP network ports, 4 copper user ports), 2 shaped services, AC/DC power supply in ½ 19” plastic enclosure
ETX-203AX/2SFP/2UTP2SFP 6 FE ports (2 SFP network ports, 2 UTP and 2 SFP user ports), 2 shaped services, AC/DC power supply in ½ 19” plastic enclosure
SW options Description
ETX-203AX-SW/GE Upgrade all ports to GbE
ETX-203AX-SW/GE30 Upgrade all ports to GbE, allow 30 shaped services
Notes: Complete list of ordering options available in RAD catalog
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 55
ETX-203AM Ordering Information
Model Description
ETX-203AM/AC/2ETH/4SFP ETX-203AM with AC PS, 2xGbE combo uplink module, 4 FE/GbE SFP user ports, 2 shaped services
ETX-203AM/AC/SH8W/4UTP ETX-203AM AC, 8W SHDSL uplink module, 4 copper user ports (FE/GE, per software license), 2 shaped services
ETX-203AM/DC/SH4W/2SFP2UTP ETX-203AM DC, 4W SHDSL uplink module, 2 copper user ports, 2 SFP user ports (FE/GE, per SW license), 2 shaped services
SW options Description
ETX-203AM-SW/GE Upgrade all ports to GbE
ETX-203AM-SW/GE30 Upgrade all ports to GbE, allow 30 shaped services
Notes: Complete list of ordering options available in RAD catalog
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 56
ETX-205A Ordering Information
Model Description
ETX-205A/AC/19 6 combo GE ports, single AC power supply, 19” metal enclosure
ETX-205A/AC/19/SYE 6 combo GE ports, single AC power supply, 19” metal enclosure, Sync-E support.
ETX-205A/DCR/19/PTP 6 combo GE ports, 2 DC power supply (redundant), 19” metal enclosure, Sync-E and 1588v2 support.
ETX-205A/AC/19/4E1T1/PTP 6 combo GE ports, single AC power supply, 19” metal enclosure, 4 E1/T1 ports, Sync-E and 1588v2 support.
Notes: Can be ordered with one or two, AC or DC power suppliesCan be ordered with different combinations of E1/T1 and SyncE/PTPComplete list of ordering options available in RAD catalog
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 57
ETX Value Proposition
ETX-203AX/ETX-203AM/ETX-205A Version 4.30 Slide 58
Thank You For Your Attention
www.rad.com