ETP-SM-1 SERIESSURFACE MOUNTACCESSORY

DESIGNED TO MOUNT A

TALKAPHONE CALL STATION

INDOORS OR OUTDOORS AND

IDENTIFY THE LOCATION OF A CALL

STATION WITH HIGH REFLECTIVE

LETTERING ON BOTH SIDES.

THE UNIT IS CONSTRUCTED OF

DURABLE STAINLESS STEEL,

CAPABLE OF WITHSTANDING

HARSH ENVIRONMENTS.

FEATURES

n Durable housing for mounting a call station outdoors on a wall, pole or kiosk

n 16GA stainless steel

n Vandal-resistant stainless steel construction

n Designed to resist extreme weather conditions

n A variety of signage, graphics and color choices are available

SU

RF

AC

E M

OU

NT

S

VO

IP-5

00

SE

RIE

S P

HO

NE

SPECIFICATION S ETP-SM-1 Surface Mount

Construction: Painted: 304 stainless steel

Stainless: 316 stainless steel

Dimensions (W x H x D): 8.87 x 11.87 x 3.37 in. (225 x 301 x 85 mm)

Weight: 4.35 lbs. (1.97 kg)

Lettering A variety of signage, graphics and color choices are available

Mounting: Mounts to a wall or straps to a pole or kiosk

Call Station Options VOIP-500 and 600 Series IP Call Stations, ETP-500 Series Analog Call Stations

TALK-A-PHONE CO. LIMITED WARRANTYTalk-A-Phone Co. warrants Talk-A-Phone Emergency Phone, Wide-Area Emergency Broadcast System (WEBS®), and Area of Rescue equipment against any defects in material and workmanship, under normal use, for a period of twenty-four (24) months from date of installation, provided that Talk-A-Phone receives a completed “Installation Certification” certifying the date on which the system has been installed. An “Installation Certification” card is enclosed with every unit. In the event that no “Installation Certification” is received by Talk-A-Phone, the twenty-four (24) months will commence on the date of ship-

ment by Talk-A-Phone. Warranty period for Models ETP-MT Tower, ETP-MT/R Radius Tower, WEBS-MT/R Radius Tower, WEBS-PM Pedestal Mount, and ETP-PM Pedestal Mount is five (5) years, under the same terms and conditions. Warranty period for Intercommunication Products is three (3) months, under the same terms and conditions. In the event this product is found by Talk-A-Phone to be defective within the warranty period, Talk-A-Phone’s only obligation and your exclusive remedy, shall be the repair and/or replacement of any defective parts, provided the equipment is returned to Talk-A-Phone Co., 7530 N. Natchez Ave., Niles, IL 60714. It is expressly understood that Talk-A-Phone shall have no obligation to furnish labor, nor pay for the labor of any third par-

ties, nor bear the expense of shipping defective products for repair. This warranty shall not apply if Talk-A-Phone determines that the defect was caused by improper use or installation, or damage caused to the equipment by others.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.Copyright 2016 Talk-A-Phone Co. All Rights Reserved

ADDITIONAL FINISH OPTIONS

ETP-SM-1-SS and VOIP-600E

316 Stainless Steel Surface Mount

ETP-SMH-1 and VOIP-500E

Painted 304 Steel Surface Mount

Hooded Surface Mount

Model: ETP-SMH-1: Surface mounted call box with slim faceplate fit and hooded protection

Construction: 16 gauge 316 stainless steel construction

Dimensions (W x H x D): 9.25 x 12.25 x 6.00 in. (234 x 311 x 152 mm)

Weight: 12 lbs (3.6 kg)

Modular By DesignAdditional features and options to consider

7530 North Natchez Avenue Niles, Illinois 60714

Tel: 773-539-1100 Email: info@talkaphone.com Web: www.talkaphone.com

DIMENSIONAL DRAWING

THE LEADERS IN SECURITY AND LIFE SAFETY COMMUNICATIONS

All dimensions are in inches and are provided for reference only.

2.24

.81

11.87

8.87

FRONT VIEW

SHOWN WITH VOIP-600 SERIES CALL STATIONFOR ILLUSTRATION PURPOSES ONLY

3.52

3.37

SIDE VIEW

STANDARD SIGNAGE: 0.75 IN. HIGH REFLECTIVE BLACK “EMERGENCY” LETTERING WITH WIDE-ANGLE VISIBILITY IS STANDARD. OPTIONAL SIGNAGE: AVAILABLE IS “ASSISTANCE”, “INFORMATION”, OR CUSTOM LETTERING, COLORS AND GRAPHICS.SIGNAGE IS ON TWO SIDES

STANDARD FINISH:PAINTED IN SAFETY YELLOWOPTIONAL FINISH:AVAILABLE PAINTED IN CUSTOM COLORS#4 VERTICAL BRUSHED STAINLESS STEEL

6.00

9.00

.25 THRU (4X)

0.5" AND 0.75"KNOCKOUTS

REAR VIEW

1.50

CL

0.5" AND 0.75" KNOCKOUTS

BOTTOM VIEW

CL

CL

REV. DESCRIPTION DATE APPROVED

REVISIONS

1.0 MARKETING RELEASE 05/03/2016 K PATEL

D

C

B

A

B

C

D

12345678

8 7 6 5 4 3 2 1

E

F

E

F

ETP-SM SERIES

SHEET 1 OF 1

05/03/2016

05/03/2016K PATEL

M OBAL

1.0SCALE: 1:4 WEIGHT:

REVPART NO.

CSIZE

TALK-A-PHONE CO.7530 N. NATCHEZ AVE. NILES, IL 60714

WWW.TALKAPHONE.COM

NAME DATE

COMMENTS:

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN

PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFTALK-A-PHONE COMPANY. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFTALK-A-PHONE COMPANY IS PROHIBITED.

A

DWG. TITLE:

FINISHDWG. NO.

ETP-SM-1

Custom Signage:Custom signage is available in a variety of languages.

Colors

Safety yellow painted stainless steel is standard. Available in custom colors or brushed stainless steel.

9.25

12.25

1.00

2.24

SHOWN WITH VOIP-600 SERIES CALL STATIONFOR ILLUSTRATION PURPOSES ONLY

FRONT VIEW

4.50

5.99

STANDARD FINISH:PAINTED IN SAFETY YELLOWOPTIONAL FINISH:AVAILABLE PAINTED IN CUSTOM COLORS#4 VERTICAL BRUSHED STAINLESS STEEL

STANDARD SIGNAGE:SIGNAGE ON TWO SIDES:0.75" HIGH REFLECTIVE BLACK “EMERGENCY”LETTERING WITH WIDE ANGLEVISIBILITY IS STANDARDALSO AVAILABLE WITH“ASSISTANCE”, “INFORMATION”,OR CUSTOM LETTERING AND COLORS.

SIDE VIEW

6.00

9.00

3.00

4.50

4X .343 THRU

.875 THRU

CL

REAR VIEW

.875

1.55

BOTTOM VIEW

CL

CL

REV. DESCRIPTION DATE APPROVED

REVISIONS

1.0 MARKETING RELEASE 4/13/2016 M. OBAL

D

C

B

A

B

C

D

12345678

8 7 6 5 4 3 2 1

E

F

E

ETP-SMH SERIES

SHEET 1 OF 2

4/8/2016

4/13/2016

M OBAL

1.0

UNLESS OTHERWISE SPECIFIED:

SCALE: 1:2 WEIGHT:

REVPART NO.

CSIZE

TALK-A-PHONE CO.7530 N. NATCHEZ AVE. NILES, IL 60714

WWW.TALKAPHONE.COM

NAME DATE

COMMENTS:

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN

FINISH

MATERIAL

INTERPRET GEOMETRICTOLERANCING PER: ASME Y14.5M-1994

DIMENSIONS ARE IN INCHESTOLERANCES:DRILL HOLE -0.00 / +0.003 ANGULAR: MACH BEND 1TWO PLACE DECIMAL 0.01THREE PLACE DECIMAL 0.005

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFTALK-A-PHONE COMPANY. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFTALK-A-PHONE COMPANY IS PROHIBITED.

A

DO NOT SCALE DRAWING

ETP-SMH-1_ASSY

DWG. TITLE:

DWG. NO.

K PATEL

ETP-SM-1

ETP-SMH-1