etc element control console - douglas 50-percent... · eos® series general information designed...
TRANSCRIPT
Element™ Control ConsoleETC®
1 of 4
Eos® Series
G E N E R A L I N F O R M A T I O N
Designed for venues using primarily conventional lighting, the Element control console provides the powerful features of the Eos system in an economical and simplified package. In addition to keypad commands, True LTP Channel Faders provide hands-on control of intensity and can be used to set manual levels and edit recorded cues and submasters. On Demand Moving Light Controls are available to facilitate using conventional accessories like moving mirror heads, color scrollers or gobo rotators, or to make controlling small numbers of moving lights simple and direct.
APPLICATIONS• Theatre• Television Studios• Houses of Worship• Corporate Theatre• Exhibits• Special Events• Touring
FEATURES• 1024 Outputs• 250 or 500 Channels• 40 or 60 Fader versions, pageable as channel or
submaster control• Master Playback pair with 60mm faders, Go, Stop/Back• Intensity, Focus, Color and Beam Palettes• Stepped, Relative and Absolute Effects• Hue+Saturation Color Picker and Gel Picker for LED, CMY
color mixing• ETCNet2™, Net3™/ACN, ArtNet and Avab UDP network protocols• Show import from Obsession®, Express™, Expression®,
Emphasis®, Congo® and Strand 500/300 Series via ASCII• I/O: local DMX512-A (2 output ports), MIDI In/Out, Ethernet• Distributed DMX, MIDI, SMPTE and contact closure via
Net3 Gateways
O R D E R I N G I N F O R M A T I O N
Element
MODEL DESCRIPTION
LMNT-40-250 Element Console, 40 Faders, 250 Channels
LMNT-40-500 Element Console, 40 Faders, 500 Channels
LMNT-60-250 Element Console, 60 Faders, 250 Channels
LMNT-60-500 Element Console, 60 Faders, 500 Channels
ETCNet2 or Net3 are distributed using Net3 Gateways, which provide DMX, MIDI/SMPTE Time Code and switch-closure functionality. MIDI In/Out is also available locally at the console.
Two universes of DMX512-A output are available at the console via 5-pin XLR, or these universes may be distributed with ETCNet2 DMX Nodes or Net3 DMX/RDM Gateways. Gateways and network equipment must be purchased separately.
Element Accessories
MODEL DESCRIPTION
Net3 RFR Net3 Radio Focus Remote
Net3 RVI Net3 Remote Video Interface (Element supports Mirror Mode* operation only)
Net3 RFR-RX Net3 Radio Focus Remote, Receiver Only
Net3 RFR-TX Net3 Radio Focus Remote, Transmitter Only
M231 19” LCD touch screen monitor (1280x1024)
*Mirror Mode provides remote display and paging of the same screens that are displayed on the console itself. There is no additional interaction with the console allowed in Mirror Mode. Computers running Element Offline may be connected to the Element console via Ethernet as a Mirror Mode Client without the need for any additional security hardware keys.
SHIPS WITH:
• Dust Cover• Mouse and Mousepad
Element™ Control ConsoleETC®
2 of 4
Eos® Series
S P E C I F I C A T I O N S
SYSTEM CAPACITY• 1024 Outputs/Parameters• 250 or 500 Channels• 10,000 Cues• 1 Cue List• 4 x 1000 Palettes (Intensity, Focus, Color, Beam)• 1000 Groups• 1000 Effects (relative, absolute or step)• 1000 Macros• Supports two external DVI monitors or one VGA monitor with
a minumum of 1280x1024 resolution, which may also be touch screens
• Hard Disk• USB ports for flash drives, pointing devices, keyboards
DISPLAY FUNCTIONS• All show data may be viewed on one or two external
monitors. Views may be expanded across both from easily accessed front panel controls
• The Central Information Area accesses: - Browser - File Management - System Setup - Network Configuration - Show Data Utilities - Printing - Record Target Lists - Patch functions - Help - Hue and Saturation Color Picker and Gel Picker - On Demand Moving Light Controls - Electronic alpha keyboard - Command Line - Selected Cue - Error messages and advisories
• Channel Displays - Live channel summary or table view - Blind cue, palette and submaster views, in list, channel,
table and spreadsheet formats - Flexi-channel to determine which channels to display - Zoom allows user to define how many channels are viewed - Color coded intensity levels indicate direction of move - Color coded non-intensity levels indicate change from
previous state - Graphic differentiation of moving lights, single parameter
devices, unpatched channels and deleted channels
S P E C I F I C A T I O N S
• Patch Views - Patch by channel - Patch by address - Assign proportional patch value, curve, preheat value
for intensity - Swap pan and tilt - Invert pan and tilt - Custom fixture editor
• Playback Status Display - Graphic representation of cue list status, past and
future cues• Cue List Index• Effect Editor• Group Editor• Park Display• Fader Display
- Isolates display to active output by fader contribution• Dimmer Monitoring
PLAYBACK CONTROLS• Master Playback crossfade pair with two 60mm
potentiometers, Go, Stop/Back and Load buttons• Grand Master with Blackout• Playback fader controls include:
- Timing Disable - Off - Release - Manual Override - Rate
• A maximum of 300 submasters (additive or inhibitive) via integral faders
MOVING LIGHT CONTROLS• On Demand Moving Light controls include labeling and
current parameter value on connected display monitor• Flip and Home functions• Parameters selectable on screen for mouse-based or touch
screen control or command line actions
Element™ Control ConsoleETC®
3 of 4
Eos® Series
S P E C I F I C A T I O N S
MANUAL CONTROL• Channel selection from keypad• Lists constructed with +, -, thru• Intensity set with level wheel, keypad, “full” and “out”• True LTP channel faders for direct hands-on intensity control• Ordered groups• Offset, including even, odd, random, reverse• Sneak• Remainder Dim and restore• Home by parameter, parameter category or all
non-intensity parameters• Park at level• Scaled park for temporary percentage adjustment• Recall from and Copy to commands• About provides detailed view of selected channels or
record targets• Undo manual control, record, update and delete operations• Lamp controls to strike, douse, calibrate fixtures
PROGRAMMING FEATURES• Channel Functions
- Non Intensity parameters set via numeric entry or On Demand Moving Light Controls
- Color matching to gel selector or Hue/Saturation color picker
• Palette Functions - Record and Update functions - Toggle display to absolute data - Up to 99 decimal values may be inserted between any two
whole numbers - Selective store to refine contents of record targets
• Effects - Create live or blind - Pattern based relative dynamic effects - Absolute effects - Step effects - Cycle time, trail and grouping determine channel
distribution and behavior when moving through effect - Duration of infinite, a specific amount of time or number
of passes through pattern - Effect attributes to modify basic behavior - Cue Level Overrides to modify size, rate and form - Multi-part effects easily synchronize parameter activity - Entry mode determines how parameters enter effects - Exit mode determines how parameters depart effects
• Cue Recording - Record tracking or cue-only - Autoplayback recorded cues
S P E C I F I C A T I O N S
- Auto-mark - Block at cue, intensity or parameter level - Follow times - Out of sequence link - Loop functions - Preheat enable - 20 part multi-part cues with default part assignment - Cue level rate override - Up to 99 decimal cues between each two whole
numbered cues - Execute List
· Triggers macros with delay · Show control triggers · Analog triggers
- Update and Update Trace functions - Undo record and delete
• Submasters - Additive, inhibitive or effect submasters - Bump button timing to fade up, dwell and fade out - Exclusive and Shielded modes - Faders as progress controller or intensity master - Bump button to mark NPs - Independent status
• Curves - Assignable in patch to modify dimmer output ramp - Assignable at cue or cue part level to modify intensity
crossfade profle or non-intensity parameter rampingINTERFACES
• 2 DMX-512 Ports (RDM ready)• Ethernet (ETCNet2™, Net3™,Artnet and Avab UDP protocols)• Contact Closure triggers via D-Sub connector• 2 DVI video connectors support two external DVI displays
(1280x1024) with optional touch screen control• 1 - VGA connector• USB Multi-purpose (minimum 5 ports)• Phone Remote• Net 3 Radio Focus Remote• MIDI In/Out (Timecode, Show Control)• Additional MIDI/SMPTE Timecode, Show Control through Net3 Gateway• Additional contact closure (12 analog inputs, 12 SPDT contact
outputs, RS-232) through Net3 GatewayELECTRICAL
• AC input (100-240V at 50/60 Hz)• 2 amps at 120V or 1 amp at 240V maximum power
consumption
Element™ Control ConsoleETC®
4 of 4
Eos® Series
P H Y S I C A L
Element Console Dimensions*
MODEL HEIGHT WIDTH DEPTH
inches mm inches mm inches mm
Element Console
5.1 130 32.9 836 17.9 455
Element Console Weights*
MODEL WEIGHT SHIPPING WEIGHT
lbs kgs lbs kgs
Element Console 30 13.6 37.5 17
*Weights and dimensions typical
Corporate Headquarters•3031PleasantViewRd,POBox620979,MiddletonWI535620979USA•Tel+16088314116•Fax+16088361736London, UK•Unit26-28,VictoriaIndustrialEstate,VictoriaRoad,LondonW36UU,UK•Tel+44(0)2088961000•Fax+44(0)2088962000Rome, IT•ViaPieveTorina,48,00156Rome,Italy•Tel+39(06)32111683•Fax+44(0)2087528486Holzkirchen, DE•Ohmstrasse3,83607Holzkirchen,Germany•Tel+49(8024)4700-0•Fax+49(8024)4700-300Hong Kong•Room1801,18/F,Tower1Phase1,EnterpriseSquare,9SheungYuetRoad,KowloonBay,Kowloon,HongKong•Tel+85227991220•Fax+85227999325Web•www.etcconnect.com•Copyright©2011ETC.AllRightsReserved.Allproductinformationandspecificationssubjecttochange.4330L1003RevFPrintedinUSA04/11
17.9”455 mm
32.9”836 mm
5.1”130 mm
ETC Connector StripsDistribution Series
S P E C I F I C A T I O N S
CONNECTOR 18-gauge steel construction (14 ga. end caps STRIPS and junction brackets for increased strength)
Designed for easy shipment, installation, and serviceAvailable with DMX outlets (for scroller and moving light control)Finished with textured black-powder coat (other colors available)Shipped standard 6’ lengths, completelywired through and folded; splicing hardwareincluded (optional 12’ or 18’ factory assembledsolid lengths are available)Standard and custom lengths and circuitry are availableIndividual circuits can have multiple outletsPanel mount outlets or pigtail connectors
20 amp parallel-blade (Edison)(type A)
20, 50 or 100 amp grounded stage pin (type B)
20 amp Twist-lock® (type C)
Multipin and other connectors available on request (i.e., VSC, Pyle National, 30 amp stage pin, 50 amp twistlock …)
2” high white-on-black circuit labels standard one side (other labeling available: 2 side polycarbonate labels, 1 and 2 side engraved lamicoid labels, or 1 side engraved covers)DIN rail mounted screwless “tension clamp” wire terminals 20 amp circuits, maximum wire size: 8 gauge Screw terminals for 50 and 100 amp circuits.Maximum wire size for 50 amp: 1 gauge.Maximum wire size for 100 amp: 2/0Wide variety of mounting and hanger bracketsavailable — (see Brackets)New packaging protects strips and aids in installation
Prefix + Quantity of Connector Connector Amp Quantity TerminalLength connector Type* Mounting rating of circuit location Hanger
99 + L Q C M @A X T H1,2,3... (A) U-ground (P) Pigtail optional - 1,2,3... (R)ight See
(B) Stage pin (O) Outlet default (L)eft hanger(C) Twistlock 20amp (C)enter page
(D) DMX
* For outlets not listed, use manufacturer's part number (must be UL listed).
O R D E R I N G I N F O R M A T I O N
Basic model numbering99L-QCM/X-T-HThis is the basic form of the model number. It reads: 99 Length; Quantity; ofConnector; Mounting (pigtail or panel); on X number of circuits; Terminal location;Hanger bracket type.Example: 9940-16BP/8-R-21. This is a connector strip (99) forty feet long withsixteen stage pin pigtails wired on eight circuits, terminals located on the right ofthe open side of the connector strip with type 21 hanger brackets.
Additional standard connector types99L-(QCM/X)(QCM/X) -T- H
For additional connector types the form is the same as above except we group allconnector types in parentheses to avoid confusion. You can add as manyconnector types as you need.Example: 9950-(20CP/20)(4AO/1)-L-22. This strip has twenty Twistlock™ pigtailswired on twenty circuits (one to one) and four Edison outlets wired on one circuitfor work lights, terms left and type 22 hangers.
Connectors other than 20 Amp99L-(QCM/X)(QCM@50/X) -T- H
For all but 20 amp connectors you must specify the amperage they are rated for.The form is the same except you add the current rating like this: @ Amps.Example: 9950-(20BP/20)(4BO@50/4)-L-22. This strip has twenty stage pin pigtailswired on twenty circuits and four stage pin outlets at 50 Amps wired on fourcircuits, terms left and type 22 hangers.
Non-standard connector types99L-(QCM/X) (Q*Mfg. Model #/X) (QCM/X) -T- H
Non-standard connector types must be UL listed to maintain the UL listing of theconnector strip. Their model numbering is similar with two exceptions.1) Use the manufacturers model or part number separated by an asterisk (hyphens
separate electrical from mechanical information)2) Mounting information is unnecessary because it is included in part number. Example: 9950-(20BP/20)(8*HBL2410/4)(4AO/1) -L-22. This strip has twentystage pin pigtails wired on twenty circuits, eight HBL2410’s wired on 4 circuits formoving lights and four Edison outlets wired on one circuit for work lights, termsleft and type 22 hangers.
DMX in Connector Strips99L-(QCM/X) (Q*Mfg. Model #/X) (QCM/X) (8D/2) -T- H
DMX model numbering (DMX rules and details on back page): 1) Show number of DMX panels on number of universes
(maximum of two universes, or call factory)2) Mounting information is unnecessary because it is a panel mount assembly.Example: 9950-(20BP/20)(8*HBL2410/4)(4AO/1)(8D/2) -L-22. This is the sameconnector strip as above with the addition of the DMX pass through panels tocontrol the moving lights.
Cable and Accessory Specifications with ETC Part #'sCable Part # OD LB/FT Kellems® Kellems® Kellems® Standard Cable
Strain Relief Deluxe Cord Support (pickup) CradleGrips Grips Double eye
12/3 W707 .610 .24 HW633 HW6186 Hw6206 N/A12/9 W721 .915 .60 HW634 HW6188 HW6208 PSE880412/14 W718 1.105 .85 HW635 HW6189 HW6209 PSE880412/20 W713 1.315 1.10 HW636 HW6191 HW6210 PSE880412/26 W715 1.453 1.45 HW636 HW6192 HW6210 PSE880412/30 W716 1.535 1.54 HW636 HW6192 HW6211 PSE880412/37 W717 1.653 1.65 HW637 HW6193 HW6211 PSE880410/3 W512 .671 .31 HW633 HW6187 HW6207 PSE880410/4 W516 0.73 0.371 HW633 HW6187 HW6207 PSE880410/5 W517 0.83 0.496 HW634 HW6187 HW6208 PSE880410/10 W513 1.12 0.98 HW635 HW6189 HW6209 PSE880410/16# W514 1.305 1.19 HW636 HW6191 HW6210 PSE880410/20# W515 1.44 1.45 HW636 HW6192 HW6210 PSE88046/3 W814 0.885 0.76 HW634 HW6188 HW6208 PSE88046/5 W815 1.09 1.14 HW635 HW6189 HW6209 PSE8804
# Requires minimum order and extended lead time, call for details.
Strain Relief Grips and Deluxe Cord Grips are not intended to support loads. See Hubbell technical section for Support Grip ratings and safety factors.
M U L T I C O N D U C T O R C A B L E A N D A C C E S S O R I E S
9700 ModelGridiron junction box
ETC recommends using an additionalstrain relief for attaching multicableto fixture pipe (Pipe by others)
Kellems grip™Strain Relief(See table below)
Cable cradle(See table below)
* Hanger brackets should be mounted every five feet.
Rigging (by others)
DMX input cable
Fixture Pipe (by others)
DMX "Pass-Thru"Panel
"Pigtail"Connector
DMX input box
9900 SeriesConnector Strip
DMX GridironJunction Box
Kellems grip™Strain Relief
Mounting Hanger BracketsPanel-Mount
OutletKellems Support Grip™
Connector StripsDistribution Series
Type Usage and Notes11 Mounts strips with the 6.25" dimension parallel to and directly on a
wall or ceiling. No mounting hardware is supplied.12 Mounts strips with the 3.3" dimension parallel to and directly on a
wall or ceiling. No mounting hardware is supplied.13 Mounts strips in a corner. No mounting hardware is supplied.14 Mounts strips to a pipe with the 6.25" dimension parallel to the floor
over a grid. Bracket is attached to the pipe with a U-bolt. Stiffenersshould be bolted between connector strips (not provided).
15 Same as 14 w/vertical segment of hanger bolted together to allowmounting at any angle over pipe
16 Similar to 14 but mounts strips to pipes with the 6.25" dimensionperpendicular to the floor. The u-bolt can be mounted from eitherside making this hanger useful for any application where a connectorstrip is mounted to a pipe
17 Same as 16, but the vertical segment of the hanger is bolted togetherto allow the connector strip to be mounted at any angle to the pipe
18 Use where a connector strip is mounted directly on a pipe at 90 degrees
48.00"
28.00"
25.00"
23.00"
18.00"
16.00"
Type 21
Type 31
(2) Type 35
Type 34**
Type 32
(2) Type 33
Type 22
(2) Type 23
Type 24
(2) Type 25
13.25"
21.25"
22.16"
42.16"
Type 11
Type 12
† Designed for use with Unistrut stiffener for grid applications—these hangersnot intended to support pipe.
Note: Clamps and U-bolts on mounting brackets are designed to be used with1.5" I.D. Schedule 40 steel pipe. (1.9" nominal O.D.)
Type 23, 25, & 33 are automatically supplied for connector strips w/terminal boxes
(2)
(2)
(2)
21.5"
Type 26
14.70"
Type 14 †
9.25"
Type 15 †
9.25"
Type 16 †
12.25"
Type 17 †
12.25"
Type 18
Types 11 through 18 are Mounting Brackets and are intended to support the connector strip only and not intended to support a pipe. No mountinghardware is supplied with type 11, 12, and 13 because it is the installersresponsibility to determine the appropriate mounting hardware.
Type Usage and Notes21 The default hanger, this unit hangs the connector strip and a pipe
to a fly system. The .75" hole in the top of the bracket is for shacklesor thimbles.
22 Designed to hang the connector strip and a pipe from a system pipealready installed.
23 Similar to 22, but designed to support the connector strip and theterm box at the end of the pipe (This unit is automatically substitutedfor one 22 when a strip has a term box; do not order)
24 Hangs the connector strip and a pipe from a system pipe (alreadyinstalled in a fly system) to under hang fixtures from both pipes. The.75" hole in the top of the bracket for shackles or thimbles can beused to hang both pipes.
25 Similar to 24, but designed to support the connector strip and theterm box at the end of the pipe (This unit is automatically substitutedfor one 24 when a strip has a term box; do not order)
26 Similar to 23 but 7" shorter. Use where space is a concern. Cannot beused on connector strips with term boxes. The .75" hole in the top ofthe bracket is for thimbles and wire rope.
Types 21 through 26 are Hanger Brackets and support both the connector stripand 1.5" schedule 40 pipe (1.9" O.D.)
Type Usage and Notes31 Straight version of the 21 hanger. Pipe attached with U-bolts.32 Straight version of the 22 hanger. Pipe attached with U-bolts.33 Straight version of the 23 hanger. Pipe attached with U-bolts.34 Unit is designed to mount a connector strip on catwalk railings.
Place u-bolts from 11.8" to 16.6 inches center to center using fourpositions on the top and slots on the bottom of bracket to cover arange of spacing.
Types 31 through 34 are "flat" Hanger Brackets that support both theconnector strip and 1.5" schedule 40 pipe (1.9" O.D.)(Note: These do not center hang loads).
Type 13
14.5"(2)
DMX Pass Thru
Top View
that deviceterminated with termination switch on Last device on this segment should be
isolated DMX 512 source (opto-splitter)DMX data originates from an optically
same time may yield unpredicable results.Using both jacks and terminating at the
PUSH
ThruPassDMX
OutputTo device
Pass Thru "engaged" when green
DMXInput
From device
Side ViewDMX PassThru Panel
• DMX should originate from an optically isolated source for eachconnector strip.
• This system maintains a linear DMX segment eliminating common DMX wiring problems.
Switch Guard Detail
• Wire from the DMX outputto DMX controlled device(moving light or scroller)with a 5 pin DMX cable.
• Wire from DMX out on device to pass thru panel so DMX isrouted to next location on strip
• Engage the Pass Thru switch (center will turn green) to route DMX past unused locations.
• The last device on aconnector strip should be terminated with thetermination switch on the device.
Fixture Fixture
Connector StripsDistribution Series
D M X C O N N E C T O R S T R I P S
P H Y S I C A L
6.25"/15.9cm
3.3"8.4cm
Cross SectionConnector Types
Connector
type B
20, 50 or
100A pin
connector
(20 AmpShown)
Connector
type A 20A parallel-blade U-Ground
(A.K.A. Edison)
Nema 5•20R
(Hubbell®)
Connector
type C
20A grounded
twist-lock®
Nema L5•20R
(Hubbell®)
DMX barrier as required.
Americas 3031 Pleasant View Rd, PO Box 620979, Middleton WI 53562 0979, USA ■ Tel +1 608 831 4116 ■ Fax +1 608 836 1736 ■ Toll free 800 688 4116 ■ Toll free fax 800 555 8912
Europe Unit 5, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK ■ Tel +44 (0)20 8896 1000 ■ Fax +44 (0)20 8896 2000
Asia Room 605-606, Tower III Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong ■ Tel +852 2799 1220 ■ Fax +852 2799 9325
Web www.etcconnect.com ■ Email (US) [email protected] ■ (UK) [email protected] ■ (Asia) [email protected]
Copyright © 2004 ETC. All Rights Reserved. All product information and specifications subject to change. 7099L1002 Rev. C Printed in USA 12/04
ETC®
1 of 6
Fresnel Series
G E N E R A L I N F O R M A T I O N
ETC combines the efficiency of the HPL lamp with the singular optical qualities of the fresnel optical system to create the truly advanced ETC Source Four Fresnel. Traditional fresnel optics provide a unique quality of blending wash light and beam shaping via barn doors for well-defined, soft-edged area lighting. The Source Four Fresnel combines this classic system with a unique reflector design enabling the HPL 750W-equipped Source Four Fresnel to equal the lumen output of other 1000W fresnel fixtures. Spot-to-flood focus is accomplished by large, easy-to-use knob for quick adjustments in inconvenient positions. The unique Quick Xchange socket design permits re-lamping from underneath the fixture without breaking focus in most situations.
S P E C I F I C A T I O N S
PHYSICAL • Rugged die-cast aluminum construction• Convenient full-size zoom adjustment knob• Unique HPL quick exchange socket enables easy lamp changes• Sliding yoke mount for variable balance point• Fully enclosed accessory slots for no light leak• UL and cUL listed
ELECTRICAL • 100V-240V, 50/60Hz• High temperature three-conductor 36” leads in a glass fiber
outer sleeve• Supports ETC Dimmer Doubling™ technology
OPTICAL • 7”/175mm aperture• 20° - 65° field angle zoom range• True fresnel optical system for good barn-door beam
shaping performance• Glass reflector with dichroic coating optimized for HPL performatnace
S P E C I F I C A T I O N S
LAMP • HPL – compact tungsten filament contained in a krypton/
xenon-filled quartz glass envelope (see table for suitable lamp types)
• Uses same lamp as all Source Four fixtures for common inventory• 750W maximum• Patented filament geometry makes for extremely efficient light collection and transmission• Integral die-cast aluminum heat sink lamp base
O R D E R I N G I N F O R M A T I O N
Source Four FresnelMODEL DESCRIPTION
FRES7 7” Source Four Fresnel (Black)
FRES7-1 7” Source Four Fresnel (White)
Connector DesignationUse suffixes below to specify factory–fitted connector type
MODEL DESCRIPTION
A Parallel-blade U-ground connector (Edison)
B Two-pin and ground, 20A connector
C Grounded 20A twist lock connector
M Dimmer Doubling Connector (NEMA L515P)
See back page for Source Four Fresnel accessories
PRELIMINARY
ETC®
Fresnel Series
P H O T O M E T R I C S
Photometric data below is measured with an HPL 750W/115V 300 hr lamp. To convert data when using any other HPL lamp, use the lumen or candela multiplying factors (Lm MF or Cd MF) for that specific lamp. These multiplying factors are listed in the Lamps table in this datasheet. For lumen data, multiply by the Lm MF. For candela or footcandle data, multiply by the Cd MF.
2 of 6
Source Four Fresnel - Medium Focus (115V)
Degree CandelaField
LumensBeam
LumensLumens per
Watt
40° 51,500 7,390 3,580 9.9
For field diameter at any distance, multiply distance by 0.716
For beam diameter at any distance, multiply distance by 0.367
Throw Distance (d)10.0’3.0m
15.0’4.6m
20.0’6.1m
25.0’7.6m
Field Diameter7.2’2.2m
10.7’3.3m
14.3’4.4m
17.9’5.5m
Illuminance (fc) 515 229 129 82
Illuminance (lux) 5,543 2,464 1,386 887
Bea
m A
ng
le
Fiel
d A
ng
le
21˚ 40˚
X
Y
Iso-Illuminance Diagram(Flat Surface Distribution)
Degrees
Can
del
a
Candela Plot60000
50000
40000
30000
20000
00 10 20-10-20
10000
-5 5 15 25-15-25
X
Y
10%
50%
.059 .118 .176 .235
Source Four Fresnel - Flood Focus (115V)
Degree CandelaField
LumensBeam
LumensLumens per
Watt
65° 17,600 10,690 7,590 14.3
For field diameter at any distance, multiply distance by 1.262
For beam diameter at any distance, multiply distance by .978
Throw Distance (d)10.0’3.0m
15.0’4.6m
20.0’6.1m
25.0’7.6m
Field Diameter12.6’3.8m
18.9’5.8m
25.2’7.7m
31.5’9.6m
Illuminance (fc) 176 78 44 28
Illuminance (lux) 1,894 842 474 303
Bea
m A
ng
le
Fiel
d A
ng
le
52˚ 65˚
X
Y
Iso-Illuminance Diagram(Flat Surface Distribution)
Degrees
Can
del
a
Candela Plot1800016000140001200010000800060004000
00 10 20 35-10-20-30
2000
-5 5 15 25-15-25-35 30
X
Y
10%
50%
.059 .118 .176 .235
ETC®
Fresnel Series
P H O T O M E T R I C S
3 of 6
Source Four Fresnel - Narrow Focus (115V)
Degree CandelaField
LumensBeam
LumensLumens per
Watt
20° 124,300 3,.990 1,930 5.3
For field diameter at any distance, multiply distance by 0.42
For beam diameter at any distance, multiply distance by 0.21
Throw Distance (d)10.0’3.0m
15.0’4.6m
20.0’6.1m
25.07.6m
Field Diameter3.5’1.1m
5.2’1.6m
6.9’2.1m
8.6’2.6m
Illuminance (fc) 1,243 552 311 199
Illuminance (lux) 13,380 5,946 3,345 2,141
Bea
m A
ng
le
Fiel
d A
ng
le
9˚ 20˚
X
Y
Iso-Illuminance Diagram(Flat Surface Distribution)
Degrees
Can
del
a
Candela Plot140000
120000
100000
80000
60000
40000
20000
0
X
Y
0 10-10 -5 5 15-15
10%
50%
.059 .118 .176 .235
ETC®
Fresnel Series
4 of 6
L A M P S
To determine Candela (Cd) or Lumens (Lm) for any other HPL lamp, multiply the Candela or Lumen value by the appropriate multiplying factor (CdMF or LmMF) shown for that lamp in the table below.
ETC
Part # Lamp Code Watts VoltsInitial
LumensColor
Temp. KAvg.
Rated Life
Spot
Cd MF
Spot
Lm MF
Flood
Cd MF
Flood
Lm MFRT116 HPL 750/115** 750 115 21,900 3,250 300 1.00 1.00 1.00 1.00
RT196 HPL 750/115X 750 115 16,400 3,050 1,500
RT113 HPL 575/115** 575 115 16,520 3,250 300
RT114 HPL 575/115X 575 115 12,360 3,050 2,000
RT142 HPL 375/115 375 115 10,540 3,250 300
RT143 HPL 375/115X 375 115 8,500 3,050 1,000
N/A HPL 750/120 750 120 21,900 3,250 300
N/A HPL 750/120X 750 120 16,400 3,050 1,500
RT115 HPL 575/120 575 120 16,520 3,250 300
RT171 HPL 575/120X 575 120 12,360 3,050 2,000
RT112 HPL 550/77* 550 77 16,170 3,250 300
RT117 HPL 550/77X* 550 77 12,160 3,050 2,000
RT160 HPL 750/230** 750 230 19,750 3,200 300 .78 .86 .81 .84
N/A HPL 750/230X 750 230 15,600 3,050 1,500
RT129 HPL 575/230** 575 230 14,900 3,200 400
RT138 HPL 575/230X 575 230 11,780 3,050 1,500
RT154 HPL 375/230X 375 230 7,800 3,050 1,000
N/A HPL 750/240 750 240 19,750 3,200 300
N/A HPL 750/240X 750 240 15,600 3,050 1,500
RT130 HPL 575/240 575 240 14,900 3,200 400
RT139 HPL 575/240X 575 240 11,780 3,050 1,500
RT155 HPL 375/240X 375 240 7,800 3,050 1,000
Source Four Fresnels rated for 750W maximum.
*77 Volt HPL lamps are for use with ETC Dimmer Doubling™ technlology only.
**Photometric data was prepared using a production fixture and the Prometric CCD measurement system. Fixture adjusted for cosine distribution and tested with calibrated lamp at rated voltage. All data normalized to nominal lamp lumens in accordance with IES LM-73-04. Testing performed at ETC West, Hollywood, CA. All other multiplying factors extrapolated from primary test data.
For links to photometry file downloads (IES LM-63-02 format) go to www.etcconnect.com.
HPL Specified Tolerances: Watts +/- 5%, Lumens +/-7%, Average life +/-10%, Color Temperature +/- 50K
“N/A” lamps are not available for purchase from ETC. Contact your dealer for purchase.
COMING SOON
COMING SOON
5 of 6
ETC®
Fresnel Series
P H Y S I C A L
19.6”497mm
15.0”381mm
12.8”325.6mm
6.9”176mm
6.5”165mm
10.9”278.4mm
9.43”239.5mm
8.6”218.9mm
13.5”341.6mm
9.1”229.9mm5.64”
143.3mm
12.4”315mm
7.32”186mm
Source Four Fresnel Weights*
MODEL WEIGHT SHIPPING WEIGHT
lbs kgs lbs kgs
Fresnel 13.3 6.1 17.5 8.0
*Add 2.3 lbs for C-clamp
O R D E R I N G I N F O R M A T I O NContinued from front page...
Source Four Fresnel Accessories
MODEL DESCRIPTION
407CF Color frame (7.5”) (included)
400SC Safety Cable
400CC C-Clamp
400BD Barn Door
400PTH3 Top hat, 3”
400PTH6 Top hat, 6”
400PHH Half hat
400PGE3 Gel extender, 3”
400PGE6 Gel extender, 6”
400WB Weighted base
400XBTH Cross baffle top hat
400L Egg crate louver
Note: For colors other than black and white, please call ETC.
Source Four products are protected by one or more of the following patents:
U.S. USRE36,3316, US5,345,371, US6,092,914and US5,775,799
U.K. GB0592589, GB0673488, 99930527.9*
Germany DE0592589, GB0673488, 99930527.9*
Japan JP2,501,772
* European patent application number
6 of 6
Corporate Headquarters•3031PleasantViewRd,POBox620979,MiddletonWI535620979USA•Tel+16088314116•Fax+16088361736London, UK•Unit26-28,VictoriaIndustrialEstate,VictoriaRoad,LondonW36UU,UK•Tel+44(0)2088961000•Fax+44(0)2088962000Rome, IT•ViaPieveTorina,48,00156Rome,Italy•Tel+39(06)32111683•Fax+44(0)2087528486Holzkirchen, DE•Ohmstrasse3,83607Holzkirchen,Germany•Tel+49(8024)4700-0•Fax+49(8024)4700-300Hong Kong•Room1801,18/F,Tower1Phase1,EnterpriseSquare,9SheungYuetRoad,KowloonBay,Kowloon,HongKong•Tel+85227991220•Fax+85227999325Web•www.etcconnect.com•Copyright©2011ETC.AllRightsReserved.Allproductinformationandspecificationssubjecttochange.7064L1001Rev.APrintedinUSA3/11
ETC®
Fresnel Series
Source Four® jr 26°ETC®
1 of 4
Ellipsoidal Series
S p e c i f i c a t i o n S
PHYSICAL • Ruggeddiecastaluminumconstruction• 20gaugestainlesssteelshuttersinabi-planeassembly• interchangeablelenstubeswithsmooth–runningteflon
guidesprovidethreeuser-fitfieldangleoptions• Highimpact,thermallyinsulatedknobsandshutterhandles• twoaccessoryslots,andatopmounted,gelframeretainer• Steelyokewithtwomountingpositions• positivelocking,hand-operatedyokeclutch• Slotforstainlesssteelpatterns• Slotwithslidingcoverformotorizedpatterndevicesor
optionaliris• ULandcULListed
ELECTRICAL• 115-240V,50/60Hz• Hightemperature3–conductor36”leadsinaglassfiber
outersleeve• SupportsetcDimmerDoubling™technology
LAMP • HpL—compacttungstenfilamentcontainedinakrypton-
filledquartzenvelope(seetableforsuitablelamptypes)• 575WMaximum• integraldiecastaluminumheatsinklampbase
S p e c i f i c a t i o n S
OPTICAL • optimizedopticalsystemforefficient
photometricperformance• projector-quality,highcontrastasphericlens• facetedborosilicatereflectorwithdichroiccoldmirrorcoating
removesgreaterthan90%infraredradiation(heat)andreflectsgreaterthan95%ofvisiblelight
• Reflectorsecuredwithanti-vibrationshockmounts• toolfree,positivelockingX,YandZlampcentering
adjustments,unaffectedbyrelamping• Beamedgecontinuallyadjustablehard-to-soft• interchangeablelensassemblykitspermitselectionof26°,
36°,and50°fieldangles,and25°-50°zoomrange
o R D e R i n g i n f o R M a t i o n
Source Four jr
MOdEL dESCRIPTIOn
426J 26˚Sourcefourjrellipsoidal(black)
426J-1 26˚Sourcefourjrellipsoidal(white)
etcSourcefourjrsaresuppliedwithc-clamp,colorframeand3’(96cm)leadsasstandard
Connector designationUseSuffixesbelowtospecifyfactory–fittedconnectortype
MOdEL dESCRIPTIOn
a parallel-bladeU-groundconnector
B two-pinandground,20ampconnector
c grounded,20amp,twistlockconnector
M DimmerDoublingconnector(neMaL515p)
SeebackpageforSourcefourjraccessories
p H o t o M e t R i c S
photometricdatabelowismeasuredwithanHpL575W/115V300hrlamp.toconvertdatawhenusinganyotherHpLlamp,usethelumenorcandelamultiplyingfactors(LmMforcdMf)forthatspecificlamp.thesemultiplyingfactorsarelistedintheLampstableinthisdatasheet.forlumendata,multiplybytheLmMf.forcandelaorfootcandledata,multiplybythecdMf.
ETC® Source Four® jr 26°
Ellipsoidal Series
completeieSphotometrydatafiles(LM-63-02format)maybedownloadedfromtheetcwebsite.
gotohttp://www.etcconnect.com/downloads.asp
2 of 4
Throw distance (d)20’
6.1m30’
9.1m35’
10.7m45’
13.7m
Field diameter8.9’2.7m
13.3’4.1m
15.5’4.7m
20’6.1m
Illuminance (fc) 229 102 75 45
Illuminance (lux) 2,462 1,094 804 486
forilluminationwithanylamp,multiplythecandlepowerofabeamspreadbythemultiplyingfactor(mf)shownforthatlamp.
todetermineilluminationinfootcandlesorluxatanythrowdistance,dividecandlepowerbydistancesquared.
forfielddiameteratanydistance,multiplydistanceby0.44
forBeamdiameteratanydistance,multiplydistanceby0.35
Source Four jr 26˚(cosine)
degree CandelaField
LumensBeam
LumensEfficiency
Lumens per
watt
26˚ 91,480 7,795 5,913 47.2% 13.6
Metricconversions:forMetersmultiplyfeetby.3048forLuxmultiplyfootcandlesby10.76
degrees
Can
del
a
Cosine Candela Plot
0
20000
40000
60000
80000
100000
120000
-15 -12 -9 -6 -3 0 3 6 9 12 15
XYX
Y
Iso-Illuminance diagram
10%
50%
20˚ 25˚
Bea
m A
ng
le
Fiel
d A
ng
le
L a M p S
todeterminecandela(cd)orLumens(Lm)foranyotherHpLlamp,multiplythecandelaorLumenvaluebytheappropriatemultiplyingfactor(cdMforLmMf)shownforthatlampinthetablebelow.
ETC Part # Lamp Code Watts VoltsInitial
LumensColor
Temp. KAverage
Rated Life
26°
Cd MF
26°
Lm MF
Rt113 HpL575/115** 575 115 16,520 3,250 300 1.00 1.00
Rt114 HpL575/115X 575 115 12,360 3,050 2,000 .64 .71
Rt142 HpL375/115 375 115 10,540 3,250 300 .84 .64
Rt143 HpL375/115X 375 115 8,500 3,050 1,000 .58 .48
Rt115 HpL575/120 575 120 16,520 3,250 300 1.00 1.00
Rt171 HpL575/120X 575 120 12,360 3,050 2,000 .64 .71
Rt112 HpL550/77* 550 77 16,170 3,250 300 1.02 .98
Rt117 HpL550/77X* 550 77 12,160 3,050 2,000 .66 .73
Rt129 HpL575/230** 575 230 14,900 3,200 400 .68 .63
Rt138 HpL575/230X 575 230 11,780 3,050 1,500 .44 .45
Rt154 HpL375/230X 375 230 7,800 3,050 1,000 .38 .33
Rt130 HpL575/240 575 240 14,900 3,200 400 .65 .63
Rt139 HpL575/240X 575 240 11,780 3,050 1,500 .41 .44
Rt155 HpL375/240X 375 240 7,800 3,050 1,000 .38 .33
Sourcefourjrisratedfor575Wmaximum.
*77VoltHpLlampsareforusewithetcDimmerDoublingtechnlologyonly.
**photometricdatawaspreparedusingaproductionfixtureandtheprometricccDmeasurementsystem.fixtureadjustedforcosinedistributionandtestedwithcalibratedlampatratedvoltage.alldatanormalizedtonominallamplumensinaccordancewithieSLM-73-04.testingperformedatetcWest,Hollywood,ca.allothermultiplyingfactorsextrapolatedfromprimarytestdata.
forlinkstophotometryfiledownloads(ieSLM-63-02format)gotowww.etcconnect.com.
HpLSpecifiedtolerances:Watts+/-5%,Lumens+/-7%,averagelife+/-10%,colortemperature+/-50K
Source Four® jr 26°ETC®
3 of 4
Ellipsoidal Series
p H Y S i c a L
Source Four® jr 26°ETC®
4 of 4
Ellipsoidal Series
Corporate Headquarters•3031pleasantViewRd,poBox620979,MiddletonWi535620979USa•tel+16088314116•fax+16088361736London, UK•Unit26-28,Victoriaindustrialestate,VictoriaRoad,LondonW36UU,UK•tel+44(0)2088961000•fax+44(0)2088962000Rome, IT•Viapievetorina,48,00156Rome,italy•tel+39(06)32111683•fax+44(0)2087528486Holzkirchen, dE•ohmstrasse3,83607Holzkirchen,germany•tel+49(8024)4700-0•fax+49(8024)4700-300Hong Kong•Room1801,18/f,tower1phase1,enterpriseSquare,9SheungYuetRoad,KowloonBay,Kowloon,HongKong•tel+85227991220•fax+85227999325Web•www.etcconnect.com•copyright©2010etc.allRightsReserved.allproductinformationandspecificationssubjecttochange.7062L1007Rev.fprintedinUSa12/10
Source Four jr Weights*
MOdEL WEIgHT SHIPPIng WEIgHT
lbs kgs lbs kgs
426j 10 4.5 16.5 7.5
*includes2.3lbsforc-clamp
o R D e R i n g i n f o R M a t i o ncontinuedfromfrontpage...
Source Four jr Accessories
MOdEL dESCRIPTIOn
450JL 50˚jrlensassembly
436JL 36˚jrlensassembly
426JL 26˚jrlensassembly
400JZK SourcefourjrZoomupgradekit*
400cc c–clamp(included)
400Sc Safetycable
400JRS Drop-iniris
400cf colorframe(6.25”)(included)
400Dn Donut(6.25”)
400tH tophat
400HH Halfhat
400ge gelextender
400pH-M patternHolder(Msize)
note:forcolorsotherthanblackandwhite,pleasecalletc.
*convertsanySourcefourjrtoaSourcefourjrZoom
Sourcefourproductsareprotectedbyoneormoreofthefollowingpatents:
U.S. USRe36,3316,US5,345,371,US6,092,914andUS5,775,799
U.K. gB0592589,gB0673488,99930527.9*
germany De0592589,gB0673488,99930527.9*
Japan Jp2,501,772
*europeanpatentapplicationnumber
7.0”178mm
18.5”470mm
9.7”246mm
8.8”/ 224mm max6.1”/155 mm min
13.7”/ 348mm max10.6”/ 269mm min
6.9”175mm
19.3”490mm
Source Four® 26˚ETC®
1 of 4
Ellipsoidal Series
S P E C I F I C A T I O N S
physical• Rugged,diecastaluminumconstruction• Rotatingshutterassembly±25˚• 20gaugestainlesssteelshuttersinatri-planeassembly• Interchangeablelenstubeswithsmooth-runningteflon
guidesprovidenineuser-fitfieldangleoptions• Thermallyinsulatedrearhandle• Highimpact,thermallyinsulatedknobsandshutterhandles• Twoaccessoryslotsandatopmounted,gelframeretainer• Steelyokewithtwomountingpositions• Positivelockingsingle-clutchfixturebody• Slotforglassorstainlesssteelpatterns• Wideaccessoryslotwithslidingcoverformotorizedpattern
devicesoroptionaliris• ULandcULListed
ElEcTRical• 115-240V,50/60Hz• Hightemperature3-conductor36”leadsinaglassfiber
outersleeve• SupportsETCDimmerDoubling™technology
laMp • 750Wmaximum• HPL–compacttungstenfilamentcontainedinakrypton-
filledquartzenvelope(seetableforavailablelampoptions)• Patentedfilamentgeometrymakesforextremelyefficient
lightcollectionandtransmission• Integraldiecastaluminumheatsinklampbase
O R D E R I N g I N F O R m A T I O N
source Four
ModEl dEscRipTion
426 26˚ellipsoidal(black)
426-1 26˚ellipsoidal(white)
ETCSourceFouraresuppliedwithC-clamp,colorframeand3’(96cm)leadsasstandard
connector designationUseSuffixesbelowtospecifyFactory–FittedConnectortype
ModEl dEscRipTion
-A Parallel-bladeU-groundconnector
-B Two-pinandground,20ampconnector
-C grounded,20amp,twistlockconnector
-m DimmerDoublingConnector(NEmAL515P)
SeebackpageforSourceFourAccessories
S P E C I F I C A T I O N S
opTical • Re-optimizedopticalsystemforimprovedphotometric
performanceandfielduniformity• Projector-quality,highcontrastasphericlens• Optionalenhanceddefinitionlenstubeavailableforeven
higherimagequality• Facetedborosilicatereflectorwithdichroiccoldmirrorcoating
removesgreaterthan90%infraredradiation(heat)andreflectsgreaterthan95%ofvisiblelight
• Reflectorsecuredwithanti-vibrationshockmounts• Lens(es)securedwithanti-vibrationshockmounts• Toolfree,positivelockingX,YandZlampcentering
adjustments,unaffectedbyrelamping• Beamedgecontinuallyadjustablehard-to-soft• Interchangeablelensbarrelspermitselectionof5˚,10˚,14°,
19˚,26˚,36˚,50˚,70°,and90°fieldanglesaswellas19˚,26˚,36˚,and50˚EDLTlenses
P H O T O m E T R I C S
PhotometricdatabelowismeasuredwithanHPL750W/115V300hrlamp.ToconvertdatawhenusinganyotherHPLlamp,usethelumenorcandelamultiplyingfactors(LmmForCdmF)forthatspecificlamp,listedintheLampstableinthisdatasheet.Forlumendata,multiplybytheLmmF.Forcandelaorfootcandledata,multiplybytheCdmF.
ETC® Source Four® 26˚
Ellipsoidal Series
CompleteIESphotometrydatafiles(Lm-63-02format)maybedownloadedfromtheETCwebsite.
gotohttp://www.etcconnect.com/downloads.asp
2 of 4
Throw distance (d)15’
4.6m30’
9.1m45’
13.7m60’
18.1m
Field diameter6.7’2.0m
13.4’4.1m
20.1’6.1m
26.8’8.2m
illuminance (fc) 783 196 87 49
illuminance (lux) 8,432 2,108 937 527
Todeterminecenterbeamilluminationinfootcandlesatanythrowdistance,dividecandelabythethrowdistancesquared.
ForFielddiameteratanythrowdistance,multiplythethrowdistanceby.45
ForBeamdiameteratanythrowdistance,multiplythethrowdistanceby.32
source Four 26˚(cosine)
degree candelaField
lumensBeam
lumensEfficiency
lumens per watt
26˚ 176,255 13,690 9,040 62.5% 18.3
metricConversions:Formeters,multiplyfeetby.3048ForLuxmultiplyfootcandlesby10.76
Bea
m A
ng
le
Fiel
d A
ng
le
18˚ 25˚
degrees
can
del
a
cosine candela plot
0
20000
40000
60000
80000
100000
120000
140000
160000
180000
200000
-15 -12 -9 -6 -3 0 3 6 9 12 15Degrees
XYX
Y
iso-illuminance diagram(Flat surface distribution)
10%
50%
%illuminancefootcandleorlux
L A m P S
TodetermineCandela(Cd)orLumens(Lm)foranyotherHPLlamp,multiplytheCandelaorLumenvaluebytheappropriatemultiplyingfactor(CdmForLmmF)shownforthatlampinthetablebelow.
ETc part # lamp code Watts Voltsinitial
lumenscolor
Temp. Kaverage
Rated life
26°
cd MF
26°
lm MFRT116 HPL750/115** 750 115 21,900 3,250 300 1.00 1.00
RT196 HPL750/115X 750 115 16,400 3,050 1,500 .64 .74
RT113 HPL575/115** 575 115 16,520 3,250 300 .78 .82
RT114 HPL575/115X 575 115 12,360 3,050 2,000 .56 .56
RT142 HPL375/115 375 115 10,540 3,250 300 .66 .52
RT143 HPL375/115X 375 115 8,500 3,050 1,000 .45 .40
N/A HPL750/120 750 120 21,900 3,250 300 1.00 1.00
N/A HPL750/120X 750 120 16,400 3,050 1,500 .64 .74
RT115 HPL575/120 575 120 16,520 3,250 300 .78 .82
RT171 HPL575/120X 575 120 12,360 3,050 2,000 .56 .56
RT112 HPL550/77* 550 77 16,170 3,250 300 .77 .77
RT117 HPL550/77X* 550 77 12,160 3,050 2,000 .59 .56
RT160 HPL750/230** 750 230 19,750 3,200 300 .64 .75
N/A HPL750/230X 750 230 15,600 3,050 1,500 .40 .59
RT129 HPL575/230** 575 230 14,900 3,200 400 .53 .61
RT138 HPL575/230X 575 230 11,780 3,050 1,500 .38 .45
RT154 HPL375/230X 375 230 7,800 3,050 1,000 .29 .32
N/A HPL750/240 750 240 19,750 3,200 300 .64 .75
N/A HPL750/240X 750 240 15,600 3,050 1,500 .40 .59
RT130 HPL575/240 575 240 14,900 3,200 400 .50 .61
RT139 HPL575/240X 575 240 11,780 3,050 1,500 .36 .45
RT155 HPL375/240X 375 240 7,800 3,050 1,000 .29 .32
SourceFourisratedfor750Wmaximum
*77VoltHPLlampsareforusewithETCDimmerDoublingtechnologyonly
**PhotometricdatawaspreparedusingaproductionfixtureandthePrometricCCDmeasurementsystem.Fixtureadjustedforcosinedistributionandtestedwithcalibratedlampatratedvoltage.AlldatanormalizedtonominallamplumensinaccordancewithIESLm-73-04.TestingperformedatETCWest,Hollywood,CA.Allothermultiplyingfactorsextrapolatedfromprimarytestdata.
Forlinkstophotometryfiledownloads(IESLm-63-02format)gotowww.etcconnect.com
HPLSpecifiedTolerances:Watts+/-5%,Lumens+/-7%,Averagelife+/-10%,ColorTemperature+/-50K
“N/A”lampsarenotavailableforpurchasefromETC.ContactyourDealerforpurchase.
Source Four® 26˚ETC®
3 of 4
Ellipsoidal Series
P H Y S I C A LC
TE
14.9”/ 378mm max.11.8”/ 300mm min.
10.0”/ 254mm max.7.3”/ 185mm min.
22.8”579mm
8.5”216mm
20.1”511mm
source Four Weights*
ModEl WEighT shipping WEighT
lbs kgs lbs kgs
26˚ 14 6.4 20 9.1
*Includes2.3lbsforC-clamp
Source Four® 26˚ETC®
4 of 4
Ellipsoidal Series
corporate headquarters•3031PleasantViewRd,POBox620979,middletonWI535620979USA•Tel+16088314116•Fax+16088361736london, UK•Unit26-28,VictoriaIndustrialEstate,VictoriaRoad,LondonW36UU,UK•Tel+44(0)2088961000•Fax+44(0)2088962000Rome, iT•ViaPieveTorina,48,00156Rome,Italy•Tel+39(06)32111683•Fax+44(0)2087528486holzkirchen, dE•Ohmstrasse3,83607Holzkirchen,germany•Tel+49(8024)4700-0•Fax+49(8024)4700-300hong Kong•Room1801,18/F,Tower1Phase1,EnterpriseSquare,9SheungYuetRoad,KowloonBay,Kowloon,HongKong•Tel+85227991220•Fax+85227999325Web•www.etcconnect.com•Copyright©2010ETC.AllRightsReserved.Allproductinformationandspecificationssubjecttochange.7060L1008Rev.gPrintedinUSA12/10
6.8”173mm
13.3”338mm
21.3”541mm
O R D E R I N g I N F O R m A T I O NContinuedfromfrontpage...
source Four accessories
ModEl dEscRipTion
426LT 26˚lenstubecomplete(black)
426LT-1 26˚lenstubecomplete(white)
426EDLT 26°EnhancedDefinitionLensTubecomplete(black)
426EDLT-1 26°EnhancedDefinitionLensTubecomplete(white)
400CC C–clamp(included)
400PH-A Patternholder(Asize)
400PH-B Patternholder(Bsize)
400PH-g glasspatternholder
400SC Safetycable
400RS Drop-iniris
400CF Colorframe(6.25”)(included)
400DN Donut(6.25”)
400TH Tophat
400HH Halfhat
400gE gelextender(Recommendedfor19°and26°only)
407gE Conicalgelextender(requires407CFbelow)
407CF 7.5”Squarecolorframe(requiredfor14°,70°,90°and407gE)
400FB SourceFourfixturebody,singleclutch
Note:Forcolorsotherthanblackorwhite,pleasecallETC.
SourceFourproductsareprotectedbyoneormoreofthefollowingpatents:
U.S. USRE36,3316,US5,345,371,US6,092,914andUS5,775,799
U.K. gB0592589,gB0673488,99930527.9*
germany DE0592589,gB0673488,99930527.9*
Japan JP2,501,772
*Europeanpatentapplicationnumber
Sensor®+ RacksETC®
1 of 4
Sensor+ Series
G e n e r a l I n f o r m a t I o n
Sensor+ dimming systems provide high density, professional features and exceptional reliability for lighting applications that require the best the entertainment industry can offer.
APPLICATIONS• Professional and educational theatre• Production studios• Concert and performance halls• themed retail and dining• multi-use Convention Centers• Houses of Worship
FEATURES• High dimmer density• Up to two 2.4kW dimmers per module• 6, 12, 24, and 48 module racks available• rugged industrial construction• Installation flexibility• adaptable modular design• 100,000a Short Circuit Current rating (SCCr)• advanced configuration editing built into rack• Stores up to 128 Presets in memory• Direct ethernet control signal input• two DmX512 inputs• Standard system and rack monitoring with
diagnostic reporting• Supports etC Dimmer Doubling™
• all racks Ul and cUl lISteDACCESSORIES
• Smartlink® Button Stations and Smartlink timeClock• Dimmer Doubler• Sound Suppression Hood• floor pedestal for 24-module rack• Document holder
o r D e r I n G I n f o r m a t I o n
Installation Racks
MOdEL dESCRIPTION
Sr48+ Sensor+ 48 module rack
Sr24+ Sensor+ 24 module rack
Sr12+ Sensor+ 12 module rack
Sr6+ Sensor+ 6 module rack
Sr24+1P Sensor+ 24 module Single Phase rack
Sr12+1P Sensor+ 12 module Single Phase rack
Sr6+1P Sensor+ 6 module Single Phase rack
Rack Options*
MOdEL dESCRIPTION
at48 amp-trap fuse option for 48-module rack
at24 amp-trap fuse option for 24-module rack
at12 amp-trap fuse option for 12-module rack
BK48 Bussing kit for 2 – 48-module racks
BK24 Bussing kit for 2 – 24-module racks
BK12 Bussing kit for 2 – 12-module racks
aUX30-48 30” auxiliary rack(s) for 48-module rack
aUX19-48 19” auxiliary rack(s) for 48-module rack
aUX19-24 19” auxiliary rack(s) for 24-module rack
aUX19-12 19” auxiliary rack(s) for 12-module rack*Vibration reduction mounts available for all Sensor+ racks. Contact etC for details
note: Power feeds above 800a up to 2000a require addition of a 30” auxiliary rack.
Rack Accessories
MOdEL dESCRIPTION
SSSh24-48 Sensor+ Sound Suppression Hood – large
SSSh6-12 Sensor+ Sound Suppression Hood – small
Pedestal floor pedestal for 24-module rack
DH Document Holder
SmartLink Accessories
MOdEL dESCRIPTION
S-lPB Smartlink Power Board for Sensor+ racks*
S-10005 Smartlink 5-Button Station*
S-10010 Smartlink 10-Button Station*
* one Smartlink Power Board required for station support.
S-lPB supports up to four stations.
only one S-lPB may be enabled in a system.
Sensor®+ RacksETC®
2 of 4
Sensor+ Series
S P e C I f I C a t I o n S
GENERAL • racks available in four sizes
- Sr6+ 6 modules, 12 dimmers maximum - Sr12+ 12 modules, 24 dimmers maximum - Sr24+ 24 modules, 48 dimmers maximum - Sr48+ 48 modules, 96 dimmers maximum
• Dual density (two dimmers per module), single density and half density dimmer modules available
• operating temperature: 0-40°C / 32-104°f - Dimmer room HVaC systems must at all times maintain
the specified ambient temperature at the dimmer rack. Dimming systems operating within 10 degrees f of the upper or lower temperature limits must strictly follow installation and operation guidelines to operate reliably.
• relative humidity: 30-90% non-condensing• all racks Ul and cUl lISteD• Ul924 lISteD for Bypass operation
MECHANICAL • rugged 16-gauge steel construction• fine-textured, scratch-resistant, epoxy paint• Sr6+ and Sr12+ uses wall mount installation• Sr24+ can be wall or pedestal mounted• Sr48+ is floor mounted• top and bottom conduit access through removable panels
(Sr48+) or knockouts (Sr6+, Sr12+, and Sr24+)• no tools required for module removal or installation• Keyed module slots prevent insertion of inappropriate
module types• front access to all wiring and terminations• full height locking door• electrostatic air filter easily removed from door for
periodic cleaning• High efficiency cooling system with airflow sensor• High visibility leD status beacon
ELECTRICAL • Sr6+, Sr12+ and Sr24+ accept:
- three phase 120/208 VaC - Single phase 120/240 VaC
• Sr48+ accepts - three phase 120/208 VaC
• line feed frequencies from 47-63Hz• line feed voltage range is 91-139 VaC*• load terminals accept up to #4 aWG (16mm2) wire (see chart)• Short Circuit Current rating: 100.000a rmS symmetrical
@ 240VaC• auxiliary equipment racks and custom switchgear/distribution
available (Call etC for details)*note:Suggested max main transformer tap 135V to allow for line fluxuation.
CONTROL ELECTRONICS• Sensor+ Control electronics module (Cem+)• Single ethernet control signal input• two DmX512 inputs• Standard diagnostic reporting via browser-based interface or
DimStat software• Supports Dimmer Doubling™
• Supports Smartlink® control of presetsOPTIONS
• advanced features™ dimmer-specific load and diagnostic reporting
• amp-trap® fuses to allow feeding individual racks from oversize mains
• Bus kits available• Vibration reduction kits available for all racks• Smartlink Power Board • Smartlink timeClock
a D D I t I o n a l I n f o r m a t I o n
Compatible dimmer Modules
SENSOR STANdARd MOdULES
MOdEL dESCRIPTION
D15/D20 Dual 15a/20a Dimmer module – 350μS
D15e/D20e Dual 15a/20a Dimmer module – 500μS
D50af Single 50a Dimmer module – 500μS – af
D100af* Half 100a Dimmer module – 500μS – af
SENSOR SPECIAL PURPOSE MOdULES
l10 Dual 10a low Wattage Dimmer module
l10f Single 10a low Wattage fluorescentDimmer module
D15f/D20f Single 15a/20a fluorescent Dimmer module
r15/r20 Dual 15a/20a relay module
CC15/CC20 Dual 15a/20a Constant Circuit Breaker module
afm air flow module
*Half-density modules use two module slots
Control Modules
MOdEL dESCRIPTION
Cem+ Control electronics module +
Load Wiring Lug Capacity
CONNECTION WIRE SIzE
10a, 15a, 20a, and 50a lugs 4 aWG max. (16mm2)
100a lugs 2/0 max.
Primary Feed Lug Capacity
CONNECTION WIRE SIzE
Sr48+ Dual 600 kcmil – 2 aWG
Sr24+ Dual 350 kcmil – 4 aWG
Sr12+ Dual 250 kcmil – 6 aWG
Sr6+ Single 2/0 – 14 aWG
Sound Pressure Level (dBA)
MOdEL dBA @ 1000Hz (1kHz)*
WITHOUT WITH SSSh**
Sr48+ 37.0 30.9
Sr24+ 40.2 34.0
Sr12+ 41.8 33.8
Sr6+ 26.0 21.4
* dBa values for each Sensor rack measured at 1 meter. Visit www.etcconnect.com for full spectrum dBa ratings.
**Sensor Sound Supression Hood (SSSh)
Sensor®+ RacksETC®
3 of 4
Sensor+ Series
Sensor+ Dimming System
Congo jr Console
DMX Plug-inDMX DMX
DMX Plug-in
Booth Stage
Switch
SmartLink
Preset 10
Preset 6
Preset 7
Preset 9
Preset 8
Preset 5
Preset 1
Preset 2
Preset 4
Preset 3
Preset 5
Preset 1
Preset 2
Preset 4
Preset 3
Preset 10
Preset 6
Preset 7
Preset 9
Preset 8
Preset 5
Preset 1
Preset 2
Preset 4
Preset 3
Preset 5
Preset 1
Preset 2
Preset 4
Preset 3
t y P I C a l S y S t e m r I S e r
t y P I C a l n e t W o r K r I S e r
Eos Console
Radio FocusRemote
(Receiver)
Radio FocusRemote
(Transmitter)
Eos Remote Video Interface
To moving lights or any DMX device
Sensor+ Dimming System
Net3 DMX Gateway
DMX
CMEi inER4 Rack
Unison Control Stations
Link Power
Link Power
Aux Power
Switch
Net3 DMX GatewayDMX from
external source
PC for ETC software
Sensor®+ RacksETC®
4 of 4
Sensor+ Series
P H y S I C a l
Empty dimmer Rack Weights Installation Rack dimensions
MOdEL WEIGHT SHIPPING WEIGHT MOdEL HEIGHT WIdTH dEPTH
lbs kgs lbs kgs inches mm inches mm inches mm
Sr48+ 188 86 198 90 Sr48+ 83.1 2110 14.6 370 22.8 580
Sr48+ Door* 31 14 35 16 Sr24+ 45.8 1160 14.6 370 16.8 430
Sr24+ 107 49 115 53 Sr12+ 25.8 660 14.6 370 13.3 340
Sr24+ Door* 17 8 20 9 Sr6+ 16.4 420 14.6 370 13.3 340
Sr12+ 45 21 50 23
Sr12+ Door* 11 5 14 6.5
Sr6+ with Door 36 16 45 21*rack doors ship separately
Full dimmer Rack Weights
MOdEL MAx. WEIGHT TyPICAL WEIGHT
lbs kgs lbs kgs
Sr48+ 493 224 459 209
Sr24+ 261 119 244 111
Sr12+ 115 53 105 48
Sr6+ 71 33 66 30* maximum – D100af modules (11.7lbs/slot) typical – D20 modules (5lbs/slot)
refer to module datasheets to calculate rack weight for other module types
Corporate Headquarters • 3031 Pleasant View rd, Po Box 620979, middleton WI 53562 0979 USa • tel +1 608 831 4116 • fax +1 608 836 1736London, UK • Unit 26-28, Victoria Industrial estate, Victoria road, london W3 6UU, UK • tel +44 (0)20 8896 1000 • fax +44 (0)20 8896 2000Rome, IT • Via Pieve torina, 48, 00156 rome, Italy • tel +39 (06) 32 111 683 • fax +44 (0) 20 8752 8486Holzkirchen, dE • ohmstrasse 3, 83607 Holzkirchen, Germany • tel +49 (80 24) 47 00-0 • fax +49 (80 24) 47 00-3 00Hong Kong • room 1801, 18/f, tower 1 Phase 1, enterprise Square, 9 Sheung yuet road, Kowloon Bay, Kowloon, Hong Kong • tel +852 2799 1220 • fax +852 2799 9325Web • www.etcconnect.com • Copyright©2010 etC. all rights reserved. all product information and specifications subject to change. 7151l1001 rev. G Printed in USa 10/10 Sensor® products protected by one or more of the following U.S. Patent numbers 5,323,088, 5,352,088, 7,233,112, 7,019,469, 6,849,943, and 6,002,563; european number 0603333t2; German 69203609.
Wall or other
barrier(all racks)
17”460mm
17”460mm
17”460mm
17”460mm
14.6”370mm
14.6”370mm
14.6”370mm
14.6”370mm
13.3”340mm
13.3”340mm 16.8”
430mm
16.4”420mm
25.8”660mm
45.8”1160mm
83.1”2110mm
22.8”580mm
All racksrequire minimum
clearanceabove fan
10.0”250mm
SR24+
SR12+
SR6+
SR48+
6”150mm
6”150mm
6”150mm
6”150mm
Standard Dimmer ModuleETC
1 of 2
Signal
Signal
D20
Standard Series
G e n e r a l I n f o r m a t I o n
the Standard Dimmer module is designed for use in both Sensor®+ and Unison® Dimming Series modular rack enclosures. Standard Dimmer modules provide cost-effective digital forward phase angle dimming for standard loads such as incandescent, low voltage, quartz, neon, cold-cathode and 2 and 4-wire fluorescent ballasts. the patented, high-density, dual modules feature modular installation and removal, fully magnetic circuit breakers and standard or enhanced risetime toroidal filters.
APPLICATIONSIncandescent lighting•low voltage lighting•Quartz lighting•neon lighting•Cold Cathode lighting•2-wire fluorescent ballast•4-wire fluorescent ballast•
FEATUREStwo 1.8 or 2.4kW dimmers per module•Standard or enhanced risetime toroidal filters •High-density modular assembly•Die-cast aluminum chassis•fully magnetic circuit breakers•
GENERAL100,000a Short Circuit Current rating (SCCr)•Ul and cUl lISteD•
o r D e r I n G I n f o r m a t I o n
100-120V Standard Dimmer Modules
MODEL DESCRIPTION
D15 Dual 15a Dimmer module, 350μS
D15e Dual 15a Dimmer module, 500μS
D20 Dual 20a Dimmer module, 350μS
D20e Dual 20a Dimmer module, 500μS
afm air flow module
Compatible Systems
MODEL DESCRIPTION
SENSOR+ INSTALLATION RACkS*
Sr6+ Sensor+ 6 module rack
Sr12+ Sensor+ 12 module rack
Sr24+ Sensor+ 24 module rack
Sr48+ Sensor+ 48 module rack
Sr6af+ Sensor+ 6 module advanced features rack
Sr12af+ Sensor+ 12 module advanced features rack
Sr24af+ Sensor+ 24 module advanced features rack
Sr48af+ Sensor+ 48 module advanced features rack
Srafn+ Sensor+ GfCI racks
SENSOR+ TOURING RACkS
SP4820+ Sensor+ 24 module touring rack (48-20a dimmers)
SP9620+ Sensor+ 48 module touring rack (96-20a dimmers)
SENSOR+ PORTAbLE PACkS
SP1220+ Sensor+ 6 module Portable Pack (12-20a dimmers)
SP1215+ Sensor+ 6 module Portable Pack (12-15a dimmers)
SP2420+ Sensor+ 12 module Portable Pack (24-20a dimmers)
SP2415+ Sensor+ 12 module Portable Pack (24-15a dimmers)
*rack enclosures also available for 230Ce and 240 Volt applications
Standard Dimmer ModuleETC
2 of 2
Standard Series
Corporate Headquarters•3031PleasantViewRd,POBox620979,MiddletonWI535620979USA•Tel+16088314116•Fax+16088361736London, Uk•Unit26-28,VictoriaIndustrialEstate,VictoriaRoad,LondonW36UU,UK•Tel+44(0)2088961000•Fax+44(0)2088962000Rome, IT•ViaEnnioQuirinoVisconti,11,00193Rome,Italy•Tel+39(06)32111683•Fax+44(0)2087528486Holzkirchen, DE•Ohmstrasse3,83607Holzkirchen,Germany•Tel+49(8024)4700-0•Fax+49(8024)4700-300Hong kong•Room1801,18/F,Tower1Phase1,EnterpriseSquare,9SheungYuetRoad,KowloonBay,Kowloon,HongKong•Tel+85227991220•Fax+85227999325Web•www.etcconnect.com•Copyright©2008ETC.AllRightsReserved.Allproductinformationandspecificationssubjecttochange.7050L1028Rev.DPrintedinUSA10/08Sensor®productsprotectedbyoneormoreofthefollowingU.S.PatentNumbers5,323,088,5,352,088,7,233,112,7,019,469,6,849,943,and6,002,563;EuropeanNumber0603333;German69203609.
P H Y S I C A L
Module Dimensions
MODEL HEIGHT WIDTH DEPTH
inches mm inches mm inches mm
D15 1.5 38. 11.8 300 4.9 127
D15e 1.5 38 11.8 300 4.9 127
D20 1.5 38 11.8 300 4.9 127
D20e 1.5 38 11.8 300 4.9 127
Module Weights
MODEL WEIGHT SHIPPING WEIGHT
lbs kgs lbs kgs
D15/D20 5.0 2.3 6.9 3.1
D15E/D20E 5.5 2.5 6.9 3.1
Maximum bTU Production per module
MODEL bTUS WATTS EFFICIENCy
D15 380 112 96.9%
D15e 474 140 96.1%
D20 522 154 96.8%
D20e 810 238 95.0%
these values should be provided to a qualified HVaC design engineer, along with dimmer quantities, types and dimmer room dimensions, to calculate dimmer room air handling requirements.
Dimmer room HVaC systems must at all times maintain the specified ambient temperature at the dimmer rack. Dimming systems operating within 10°f of the upper or lower temperature limits must strictly follow installation and operation guidelines to operate reliably.
SCR Rating
MODULE D15/D20
Single cycle peak surge current 625a
Half cycle peak surge current 1620a
transient over voltage 600V
S P e C I f I C a t I o n S
GENERALUl and cUl listed for continuous duty at 100% of rated load•
D15/D15E–1.8kW -D20/D20E–2.4kW -
PHySICAL modular plug-in assemblies•Castaluminumchassis,finishedwithtexturedepoxypaint•Keyedtopreventinsertionininappropriatelyratedrack•positions
CIRCUIT bREAkERSfully magnetic to eliminate nuisance tripping•20xinrushcurrentrating•125%, 10-120 seconds, must-trip rating •rated for 100% switching duty applications•
RATINGS100,000a Short Circuit Current rating rating (SCCr) • modules withstand hot-patching of cold loads up to full •ratingUl and cUl lISteD•
POWER DEVICESealed, patented assembly•field replaceable with screwdriver•two back-to-back SCrs per circuit•one control leD per circuit•4000V isolation between control and power components•Integral bonded heatsink•Integral temperature sensor•
FILTERING High quality toroidal filters•
350μS risetime - Standard 100-120V modules - *
500μS risetime - enhanced 100-120V modules - *
* risetime measured at full load, at worst case firing angle (90 degrees), from 10-90% of output wave form
DIMMER RANGEIncandescent, low voltage dimming range 100-0%• Dimming range of 2 and 4-wire fluorescent ballast is •dependent on lamp ballast combination. Contact etC for range verification Sizing of neon transformer used in dimming applications •shouldbe1.5xgreaterthansizeusedinnon-dimmingapplication
Unison® Heritage™ Button StationETC
1 of 2
Unison Control Series
G e n e r a l I n f o r m a t I o n
elegant and clean-lined, Unison Heritage controls are designed to complement – not to compete with – the aesthetics of any interior environment, while being easy to install using linkConnect. artful but durable, Heritage stations are engineered to stand up to the daily abuse of busy public areas. the Unison Heritage series of button control stations can be customized to suit any décor and application – available in a wide range of sizes, colors and configurations. Choose from pre-configured button combinations or put stations together to create endless combinations of controls.
APPLICATIONS Churches•Hotels•Convention Centers•meeting rooms•Schools•restaurants•
FEATURES linkConnect – using echelon’s lontalk• ® protocol with linkPower, the two wire topology-free system gives you the freedom to put stations where you need them fastener free faceplate System – no visible means •of attachment ColorCondition – rGB leD’s allow for customized control •indication on a per button basis, unlocking the conditional logic capabilities of a Paradigm control system forever legend System – complimentary colored standard •or custom legend options using an indelible, laser-marking method remoteDirect – a built in Infrared (Ir) receiver on every •station allows for optional Ir remote control at every station lockout – configurable control lockout from the push of •a button take Control – set the faders on a Heritage fader station and •then choose when to gain control of the lighting in a room, at exactly the right moment
o r D e r I n G I n f o r m a t I o n
Button Stations
mOdEL dESCRIPTION LEgENd
UH00001- __1f 1/2 gang, 1 button on/off
UH00002- __1f 1/2 gang, 2 button on, off
UH00005- __1f 1/2 gang, 5 button Preset 1-4, off
UH10001- __1f 1 gang, 1 button on/off
UH10001- __2f 1 gang, 1 button entry
UH10001- __3f 1 gang, 1 button Panic
UH10002- __1f 1 gang, 2 button on, off
UH10002- __2f 1 gang, 2 button open, Close
UH10005- __1f 1 gang, 5 button Preset 1-4, off
UH10007- __1f 1 gang, 7 button raise, lower, Preset 1-4, off
UH10010- __1f 1 gang, 10 button Preset 1-9, off
UH11K00- __1f 1 gang, 1 keyswitch (maintained*)
lockout
UH11K01- __1f 1 gang, 1 keyswitch (maintained*), 1 button
lockout, on/off
UH11K01- __2f 1 gang, 1 keyswitch (maintained*), 1 button
lockout, entry
UH11K01- __2f 1 gang, 1 keyswitch (maintained*), 1 button
lockout, Panic
UH11K02- __1f 1 gang, 1 keyswitch (maintained*), 2 button
lockout, on, off
UH11K02- __2f 1 gang, 1 keyswitch (maintained*), 2 button
lockout, open, Close
UH11K05- __1f 1 gang, 1 keyswitch (maintained*), 5 button
lockout, Preset 1-4, off
*Keyswitch stations available in momentary configurations.
notes:
enter station color code in __ space provided:
1 = Cream (ral 9001)
2 = Ivory (ral 1015)
3 = Gray (ral 7001)
4 = Black (ral 9004)
5 = Signal White (ral 9003)
above stations flush mount (f) in industry standard gang boxes. (By others)
also available in surface mount (S) and portable (P) configurations. (Contact etC)
Unison® Heritage™ Button StationETC
2 of 2
Unison Control Series
Corporate Headquarters•3031PleasantViewRd,POBox620979,MiddletonWI535620979USA•Tel+16088314116•Fax+16088361736London, UK•Unit26-28,VictoriaIndustrialEstate,VictoriaRoad,LondonW36UU,UK•Tel+44(0)2088961000•Fax+44(0)2088962000Rome, IT•ViaEnnioQuirinoVisconti,11,00193Rome,Italy•Tel+39(06)32111683•Fax+44(0)2087528486Holzkirchen, dE•Ohmstrasse3,83607Holzkirchen,Germany•Tel+49(8024)4700-0•Fax+49(8024)4700-300Hong Kong•Room1801,18/F,Tower1Phase1,EnterpriseSquare,9SheungYuetRoad,KowloonBay,Kowloon,HongKong•Tel+85227991220•Fax+85227999325Web•www.etcconnect.com•Copyright©2008ETC.AllRightsReserved.Allproductinformationandspecificationssubjecttochange.7181L1002Rev.APrintedinUSA09/08
Unison®productsprotectedbyoneormoreofthefollowingU.S.PatentenNumbers5,323,088,5,352,958and6,849,943;EuropeanPatetenNumber0603333;GermanPatentNumber69203609;USandInternationalpatentspending
P H Y S I C A L
Flush Backbox dimensions*
gANg HEIgHT WIdTH dEPTH
inches mm inches mm inches mm
1/2 3.75 95.3 1.3 33 3.25 82.6
1 3.75 95.3 2.0 50.8 2.5 63.5
1GangflushmountbackboxRACO690
1/2 Gang flush mount back box provided by etC
Surface Backbox dimensions*
gANg HEIgHT WIdTH dEPTH
inches mm inches mm inches mm
1/2 3.75 95.3 1.75 44.5 3.25 82.6
1 3.75 95.3 2.0 50.8 2.5 63.5
Surface mount back boxes provided by etC
Faceplate dimensions*
gANg HEIgHT WIdTH
inches mm inches mm
1/2 4.5 114.3 1.75 44.5
1 4.5 114.3 2.8 71*Dimensions typical
S P e C I f I C a t I o n S
gENERALUl and cUl lISteD•Ce marked•
FUNCTIONAL Button and keyswitch functions include: preset selection, •record mode activation, station lockout, raise, lower, macro activation, zone on/off control, timed event override and wall open/close or toggle Custom button functionality programmable via lightDesigner •configuration software Programmable electronic lockout levels•allows for programming of individual lockout levels•
mECHANICAL Standard configurations with 1, 2, 5, 7 and 10 buttons •or 0,1,2,and 5 buttons with a maintained or momentary keyswitchCustom button stations available, contact etC•Gangable for custom applications•enclosed electronics assembly and faceplate included•Cantilevered switch arrays with removable caps•no visible means of attachment •Flushmountinindustrystandardbackbox,RACO690 •orequivalent Surface mount back-boxes available from manufacturer•Constructedofinjectionmolded,ABSplasticinfivestandard•colors, matched to ral standard colorsCustom colors available with sample•Indelibly marked legends in a contrasting color•Integral rGB leD response indicator for each button•Integrated Ir receiver•
ELECTRICAL Connect via echelon• ® linkPower control network utilizing low voltage Class II wiring topology free and polarity independent wiring over Belden •8471orequivalentand(1)#14ESDdrainwire Wiring may be bus, loop, home-run or any combination •of theseall station terminations are connectorized•Ul and cUl lISteD, Ce marked•
THERmAL ambient room temperature: 0-40°C / 32-104°f•ambient humidity: 30-90% non-condensing•
Unison® Heritage™ Fader StationsETC
1 of 2
Unison Control Series
G e n e r a l I n f o r m a t I o n
elegant and clean-lined, Unison Heritage controls are designed to complement – not to compete with – the aesthetics of any interior environment, while being easy to install using linkConnect. artful but durable, Heritage stations are engineered to stand up to the daily abuse of busy public areas. the Unison Heritage series of button/fader control stations can be customized to suit any décor and application – available in a wide range of sizes, colors and configurations. Choose from pre-configured button/fader combinations or put stations together to create endless combinations of controls.
APPLICATIONSChurches•Hotels•Convention Centers•meeting rooms•Schools•restaurants•
FEATURES linkConnect – using echelon• ® lontalk® protocol with linkPower, the two wire topology-free system gives you the freedom to put stations where you need them fastener free faceplate System – no visible means •of attachment ColorCondition – rGB leD’s allow for customized control •indication on a per button or fader basis, unlocking the conditional logic capabilities of a Unison control system forever legend System – complimentary colored standard •or custom legend options using an indelible, laser-marking method remoteDirect – built in Infrared (Ir) receivers on every station •allow for optional Ir remote control at every station location realfade – physical slider controls for groups or zones with 1 •to 16 faders per station, paired with up to 12 buttons lockout – configurable control lockout from the push of •a button take Control – preset the faders on a Heritage fader station •and then choose when to gain control of the lighting in a room, at exactly the right moment
o r D e r I n G I n f o r m a t I o n
Heritage Fader Stations
MOdEL dESCRIPTION LEgENd
UH10100- __1f 1 gang, 1 fader master
UH10101- __1f 1 gang, 1 fader, 1 button
master, on/off
UH10101- __2f 1 gang, 1 fader, 1 button
master, entry
UH10101- __3f 1 gang, 1 fader, 1 button
master, Panic
UH10102- __1f 1 gang, 1 fader, 2 buttons
master, open, Close
UH10102- __2f 1 gang, 1 fader, 2 buttons
master, on, off
UH10105- __1f 1 gang, 1 fader, 5 buttons
master, Preset 1-4, off
UH30407- __1f 3 gang, 4 fader, 7 buttons
manual, record, master, Zone 1-3, Preset 1-4, off
UH30412- __1f 3 gang, 4 fader, 12 buttons
manual, record, master, Zone 1-3, Preset 1-9, off
UH40707- __1f 4 gang, 7 fader, 7 buttons
manual, record, master, Zone 1-6, Preset 1-4, off
UH40712- __1f 4 gang, 7 fader, 12 buttons
manual, record, master, Zone 1-6, Preset 1-9, off
UH51007- __1f 5 gang, 10 fader, 7 buttons
manual, record, master, Zone 1-9, Preset 1-4, off
UH51012- __1f 5 gang, 10 fader, 12 buttons
manual, record, master, Zone 1-9, Preset 1-9, off
UH61307- __1f 6 gang, 13 fader, 7 buttons
manual, record, master, Zone 1-12, Preset 1-4, off
UH61312- __1f 6 gang, 13 fader, 12 buttons
manual, record, master, Zone 1-12, Preset 1-9, off
UH71607- __1f 7 gang, 16 fader, 7 buttons
manual, record, master, Zone 1-15, Preset 1-4, off
UH71612- __1f 7 gang, 16 fader, 12 buttons
manual, record, master, Zone 1-15, Preset 1-9, off
enter station color code in __ space provided.
1 = Cream (ral 9001)
2 = Ivory (ral 1015)
3 = Gray (ral 7001)
4 = Black (ral 9004)
5 = Signal White (ral 9003)
above stations flush mount (f) in industry standard gang boxes. (By others)
also available in surface mount (S) and portable (P) configurations. (Contact etC)
Unison® Heritage™ Fader StationsETC
2 of 2
Unison Control Series
Corporate Headquarters•3031PleasantViewRd,POBox620979,MiddletonWI535620979USA•Tel+16088314116•Fax+16088361736London, UK•Unit26-28,VictoriaIndustrialEstate,VictoriaRoad,LondonW36UU,UK•Tel+44(0)2088961000•Fax+44(0)2088962000Rome, IT•ViaEnnioQuirinoVisconti,11,00193Rome,Italy•Tel+39(06)32111683•Fax+44(0)2087528486Holzkirchen, dE•Ohmstrasse3,83607Holzkirchen,Germany•Tel+49(8024)4700-0•Fax+49(8024)4700-300Hong Kong•Room1801,18/F,Tower1Phase1,EnterpriseSquare,9SheungYuetRoad,KowloonBay,Kowloon,HongKong•Tel+85227991220•Fax+85227999325Web•www.etcconnect.com•Copyright©2008ETC.AllRightsReserved.Allproductinformationandspecificationssubjecttochange.7181L1001Rev.APrintedinUSA09/08
Unison®productsprotectedbyoneormoreofthefollowingU.S.PatentenNumbers5,323,088,5,352,958and6,849,943;EuropeanPatetenNumber0603333;GermanPatentNumber69203609;USandInternationalpatentspending
P H Y S I C A L
Flush Backbox dimensions*
gANg HEIgHT WIdTH dEPTH
inches mm inches mm inches mm
1 (raCo 690*) 3.75 95.3 2.0 50.8 2.5 63.5
3 (raCo 692*) 3.75 95.3 6.4 162.6 2.5 63.5
4 (raCo 693*) 3.75 95.3 8.2 208.3 2.5 63.5
5 (raCo 694*) 3.75 95.3 10.0 254.0 2.5 63.5
6 (raCo 695*) 3.75 95.3 11.8 299.7 2.5 63.5
7 (by etC) 3.75 95.3 13.6 345.4 2.5 63.5*Orequivalent
Surface Backbox dimensions*
gANg HEIgHT WIdTH dEPTH
inches mm inches mm inches mm
1 4.6 116.8 2.9 73.7 2.5 63.5
3 4.6 116.8 6.9 175.3 2.5 63.5
4 4.6 116.8 8.7 221.0 2.5 63.5
5 4.6 116.8 10.5 266.7 2.5 63.5
6 4.6 116.8 12.3 312.4 2.5 63.5
7 (by etC) 4.6 116.8 14.1 358.1 2.5 63.5*Surface mount back boxes provided by etC
Faceplate dimensions*
gANg HEIgHT WIdTH
inches mm inches mm
1 4.5 114.3 2.8 71.1
3 4.5 114.3 6.7 170.2
4 4.5 114.3 8.6 218.4
5 4.5 114.3 10.4 264.2
6 4.5 114.3 12.2 309.9
7 4.5 114.3 14.0 355.9*Weights and dimensions typical
S P e C I f I C a t I o n S
FUNCTIONAL Ul and cUl lISteD•Ce marked•
FUNCTIONAL operate default or custom system functions including preset •selection, manual mode activation, record mode activation, stationlockout,raise,lower,sequencecontrol,zoneon/off,room combine, macro activation and timed event override fader functions include master, zone, fade rate, or preset• Custom button and fader functionality programmable via •lightDesigner configuration softwareProgrammable electronic lockout levels•Buttons allow programming of individual lockout levels.•
MECHANICAL Standard configurations with 7 or 12 buttons and 4, 7, 10, •13 or 16 faders Support for 1-12 buttons and 1-16 faders for custom •applications, contact etC enclosed electronics assembly•faceplate with no visible means of attachment• 45mm slide potentiometer faders and cantilevered switch •arrays with removable capsflush mount in industry standard back boxes •Surface mount back boxes available from manufacturer•Constructedofinjectionmolded,ABSplasticinfivestandard•colors, matched to ral standard colorsCustom colors available with sample•Indelibly marked legends in a contrasting color• Integral rGB leD response indicator for each •button and faderIntegrated Ir receiver•
ELECTRICAL Connect via echelon• ® linkPower® control network utilizing low voltage Class II wiring topology free and polarity independent wiring over Belden •8471orequivalent,and(1)#14ESDdrainwire Wiring may be bus, loop, home-run or any combination •of theseall station terminations are connectorized.•Ul and cUl lISteD, Ce marked•
THERMAL ambient room temperature: 0-40°C / 32-104°f•ambient humidity: 30-90% non-condensing•
Unison® Paradigm® ControlDesigner™ETC®
1 of 2
Unison Software Series
G e n e r a l I n f o r m a t I o n
Companion to lightDesigner™, ControlDesigner software gives you the tools to create the look of your touchscreen pages and other user interfaces, pre-visualizing your control interface. free for download from etC’s Web site www.etcconnect.com, ControlDesigner lets you choose from built-in graphics or build your own as you develop unique interfaces ahead of time and load them when you are ready. Change the look of the graphics by selecting from a variety of convenient ready-made themes, or easily design your own.
ApplicAtions• Churches• Schools• restaurants• Hotels• museums• Casinos• Ballrooms
MiniMuM coMputer requireMents• Windows 7 (Home Premium) or XP (Pro SP2) or better• 2 GHz Pentium 4 processor or better (Dual or Quad core
recommended)• 1 GB of available hard drive space• 1 GB of ram or better (2GB recommended)• Video Card capable of 1024x768 resolution
(1280x1024 recommended)• open Gl Graphics acceleration• ethernet Port• USB Port or SD card slot• Keyboard and mouse
G e n e r a l I n f o r m a t I o n
FeAtures• DesignView – create and edit control pages using buttons,
faders, custom pages, pop-up windows, background images, animated clocks, transparent buttons, and navigation controls with animated page transitions, add pages to create and edit timed events within your system
• ControlView – simulate each page, and the page transitions before uploading to the system
• themeBuilder – design pages using standard graphics, then change the “skin” using built-in or custom graphics
• Secure-It touch – automatically create numeric password-entry pages, protecting any page or control from access
Unison® Paradigm® ControlDesigner™ETC
2 of 2
Unison Software Series
corporate Headquarters • 3031 Pleasant View rd, Po Box 620979, middleton WI 53562 0979 USa • tel +1 608 831 4116 • fax +1 608 836 1736london, uK • Unit 26-28, Victoria Industrial estate, Victoria road, london W3 6UU, UK • tel +44 (0)20 8896 1000 • fax +44 (0)20 8896 2000rome, it • Via ennio Quirino Visconti, 11, 00193 rome, Italy • tel +39 (06) 32 111 683 • fax +44 (0) 20 8752 8486Holzkirchen, De • ohmstrasse 3, 83607 Holzkirchen, Germany • tel +49 (80 24) 47 00-0 • fax +49 (80 24) 47 00-3 00Hong Kong • room 1801, 18/f, tower 1 Phase 1, enterprise Square, 9 Sheung Yuet road, Kowloon Bay, Kowloon, Hong Kong • tel +852 2799 1220 • fax +852 2799 9325Web • www.etcconnect.com • Copyright©2010 etC. all rights reserved. all product information and specifications subject to change. 7180l1006 rev. C Printed in USa 06/10 Unison® products protected by one or more of the following: U.S. Patent no. 5,323,088, 6,849,943, and 5,352,958; european Patent no. 0603333; German Patent no. 69203609; US and International patents pending
S P e C I f I C a t I o n S
the Unison Paradigm ControlDesigner software program shall be an application software package that facilitates off-line Unison Paradigm touchscreen station configuration
• Software setup shall include Configuration and Design Wizards, to create a graphical representation of a control environment
• the software program shall be downloadable from the manufacturer’s website free of charge
Functions• Provides functionality to create and modify Pages for display
on a specific type of touchscreen Station• there shall be a wizard to assist with the creation of Pages• a single configuration for an touchscreen Station shall be
defined as a set of one or more Pages• each Page shall have a background that may incorporate
multiple images or animations• Pop-ups can be shown/hidden over any Page in a
Configuration and more than one Popup can be shown at once
• Pages may have multiple design elements that may be Controls, Indicators or both
• Design elements shall have a user-defined size, position and z-order that cannot be changed from within the System
• each design element shall have between 1 and 256 states, each of which can have a distinct appearance
• the appearance of a state can be taken from a theme or imported image file
• there shall be support for import of JPeG and PnG image formats
• transparency shall be supported• animated images shall be supported• transitions between states of design elements can
be animated• Page transitions can be animated• Design elements shall have a visibility group and threshold• Design elements that are Controls shall have a lockout group
and threshold• all text shall have a user-definable font family, size, color
and alignment
S P e C I f I C a t I o n S
• there shall be at least the following types of design elements - label - level Indicator - Button - fader (straight and curved) - Clock (analog and digital) - numeric Keypad - tab - Pages - Pop-ups - frames
• Pop-ups can be any fixed size up to the Page size• Pop-ups will have a fixed position on screen (but may move
when being shown/hidden)• themes shall define a collection of consistent appearances
and sounds for design elements• It shall be possible to change the theme used for a particular
Station without modifying the underlying design elements• there shall be tools to assist with the creation of new themes• Shall allow sounds to be associated with a particular Page• Shall allow sounds to be associated with state transitions of
particular design elements• Sounds may be used to provide touchscreen
interaction feedback• a Page can be designated as the Station inactivity Page• a Page can have a lockout group and threshold• a tab can have a visibility group and threshold• there shall be a visualization interface for Page creation
and editing• Standard graphical interaction methods (drag-and-drop) shall
be used to arrange design elements on Pages• there shall be a layout grid with user-defined spacing and
color with associated snap-to-grid functionality• It shall be possible to reuse the graphical layout of a
configuration independent of any assigned functionality• the touchscreen design functionality shall be part of a
separate application that can be used alongside lightDesigner
ETC Outlet BoxesDistribution Series
G E N E R A L I N F O R M A T I O N
Outlet boxes are designed for surface or recess mountingin theatres, television studios and other spaces fordistribution of lighting circuits.
FEATURES Surface and recess mounting available1, 2, 3, 4, 5, 6, and 8 connectorsPanel mount connector Options:
Edison (20A)Stage Pin (20, 60 and 100 amp)Grounded Twist-Lock (20A)
Over- and Under-hung U-bolt and C-clamp pipemount options availableUL and cUL Listed
PHYSICAL Fabricated from 18-gauge steel with 16-gaugecovers and 14-gauge end capsFinished with fine-textured, scratch-resistant,black powder coat 2” or 3/4” labels with white numbers on blackbackground (sized to match product) Pin outlets spaced on 1.25” or 3” centersEdison or Twist-Lock outlets spaced on 3” centers only
Standard Surface Mount Outlet BoxesOutlet Qty Edison Pin 3” Pin 1.25” Twistlock
1 9101A 9101B 9101BD 9101C2 9102A 9102B 9102BD 9102C3 9103A 9103B 9103BD 9103C4 9104A 9104B 9104BD 9104C5 9105A 9105B 9105BD 9105C6 9106A 9106B 9106BD 9106C8 9108A 9108B 9108BD 9108C
O R D E R I N G I N F O R M A T I O N
Standard Recessed Mount Outlet BoxesOutlet Qty Edison Pin 3” Pin 1.25” Twistlock
1 9201A 9201B 9201BD 9201C2 9202A 9202B 9202BD 9202C3 9203A 9203B 9203BD 9203C4 9204A 9204B 9204BD 9204C5 9205A 9205B 9205BD 9205C6 9206A 9206B 9206BD 9206C8 9208A 9208B 9208BD 9208C
To any 9100 series box, add “-U” (U-Bolt) or “-C” (C-clamp) after the connectortype to indicate pipe mount option. For example, 9104B-U indicates surface mount,4-outlet box with stage pin connectors and U-bolt pipe mounting kit.
# of Back box 9100 Panel 9200 PanelOutlets Dimensions Widths Widths
PIN 1 3” W x 6.25” H x 3.25” D 3” 4”1.25” 2,3,4 6” W x 6.25” H x 3.25” D 6” 7”
5,6 9” W x 6.25” H x 3.25” D 9” 10”8 12” W x 6.25” H x 3.25” D 12” 13”
Other 1,2 6” W x 6.25” H x 3.25” D 6” 7”3.00” 3,4 12” W x 6.25” H x 3.25” D 12” 13”
5,6 18” W x 6.25” H x 3.25” D 18” 19”8 24” W x 6.25” H x 3.25” D 24” 25”
Pigtail BoxesDistribution Series
G E N E R A L I N F O R M A T I O N
Pigtail boxes are designed for surface or recess mountingin theatres, television studios and other spaces fordistribution of lighting circuits.
FEATURES Surface and recess mounting available1, 2, 3, 4, 5, 6, and 8 connectors18”, 24” and 36” pigtails standard Connector Options:
Edison (20A)Stage Pin (20, 60 and 100 amp)Grounded Twist-Lock (20A)
Over- and Under-hung U-bolt and C-clamp pipemount options availableUL and cUL Listed
PHYSICAL Fabricated from 18-gauge steel with 16-gaugecovers and 14-gauge end capsFinished with fine-textured, scratch-resistant,black powder coat2” or 3/4” labels with white numbers on blackbackground (sized to match product) Pin pigtails spaced on 1.25” or 3” centersEdison or Twist-Lock pigtails spaced on 3” centers only
O R D E R I N G I N F O R M A T I O N
# of Back box 9300 Panel 9400 PanelPigtails Dimensions Widths Widths
PIN 1 3” W x 6.25” H x 3.25” D 3” 4”1.25” 2,3,4 6” W x 6.25” H x 3.25” D 6” 7”
5,6 9” W x 6.25” H x 3.25” D 9” 10”8 12” W x 6.25” H x 3.25” D 12” 13”
Other 1,2 6” W x 6.25” H x 3.25” D 6” 7”3.00” 3,4 12” W x 6.25” H x 3.25” D 12” 13”
5,6 18” W x 6.25” H x 3.25” D 18” 19”8 24” W x 6.25” H x 3.25” D 24” 25”
Standard Surface Mount Pigtail BoxesOutlet Qty Edison Pin 3” Pin 1.25” Twistlock
1 9301A 9301B 9301BD 9301C2 9302A 9302B 9302BD 9302C3 9303A 9303B 9303BD 9303C4 9304A 9304B 9304BD 9304C5 9305A 9305B 9305BD 9305C6 9306A 9306B 9306BD 9306C8 9308A 9308B 9308BD 9308C
Standard Recessed Mount Pigtail BoxesOutlet Qty Edison Pin 3” Pin 1.25” Twistlock
1 9401A 9401B 9401BD 9401C2 9402A 9402B 9402BD 9402C3 9403A 9403B 9403BD 9403C4 9404A 9404B 9404BD 9404C5 9405A 9405B 9405BD 9405C6 9406A 9406B 9406BD 9406C8 9408A 9408B 9408BD 9408C
To any 9300 series box, add “-U” (U-Bolt) or “-C” (C-clamp) after the connectortype to indicate pipe mount option. For example, 9304B-U indicates a surfacemount box with 4-18” pigtails and stage pin connectors plus a U-bolt pipemounting kit.
Floor/Wall PocketsDistribution Series
G E N E R A L I N F O R M A T I O N
Floor and Wall Pockets are designed for recess mountingin floors and walls of theatres, television studios andother spaces for distribution of lighting circuits.
FEATURES 1, 2, 3, 4, 5, and 6 connectorsConnector Options:
Edison (20A)Stage Pin (20, 60 and 100 amp)Grounded Twist-Lock (20A)
UL and cUL Listed enclosureFLOOR 3/8” cast iron hinged cover with a non-skidPOCKET tread pattern and cable notches
3/4” labels with white numbers on blackbackground
WALL Fabricated from 18-gauge steel POCKET with 16 gauge covers
Finished with fine-textured, scratch-resistant,black powder coat3/4” reverse-screened white-on-blackpolycarbonate adhesive labels
Standard Floor PocketsModel# Description8501 Floor pocket, 1 outlet 8502 Floor pocket, 2 outlets 8503 Floor pocket, 3 outlets 8504 Floor pocket, 4 outlets 8505 Floor pocket, 5 outlets – Pin & Edison only 8506 Floor pocket, 6 outlets – Pin only
O R D E R I N G I N F O R M A T I O N
Standard Wall PocketsModel# Description9601 Recess Wall pocket, 1 outlet 9602 Recess Wall pocket, 2 outlets 9603 Recess Wall pocket, 3 outlets 9604 Recess Wall pocket, 4 outlets 9605 Recess Wall pocket, 5 outlets – Pin only9606 Recess Wall pocket, 6 outlets – Pin only
Add A (Edison), B (Stage Pin) or C (Twist lock) to part number to indicate connectortype. For example, 9504B indicates a floor pocket with 4 stage pin connectors.Part numbers refer to 20A outlets; consult factory for alternate configurations.
NEMA PanelsDistribution Series
Americas ■ 3030 Laura Lane, P.O. Box 620979, Middleton, WI 53562-0979 USA ■ Tel: +1 608 831 4116 ■ Fax: +1 608 836 1736 ■ Toll free: 800 688 4116 ■ Toll free fax: 800 555 8912
Europe ■ Unit 5, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK ■ Tel: +44 (0)20 8896 1000 ■ Fax: +44 (0)20 8896 2000
Asia ■ Room 605-606, Tower III Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong ■ Tel: +852 2799 1220 ■ Fax: +852 2799 9325
Web: www.etcconnect.com ■ Email: (US) [email protected] ■ (UK) [email protected] ■ (Asia) [email protected]
Copyright © 2003 ETC. All Rights Reserved. All product information and specifications subject to change. 7099L1004 Rev. A Printed in USA 04/03
G E N E R A L I N F O R M A T I O N
An alternative to surface and recessed outlet boxes, NEMA Panels are designed for recessed mounting indiscreet small spaces or existing back boxes – balcony rails and orchestra pits.
NEMA panels are designed for use with customer-suppliedindustry standard electrical back boxes.
FEATURES 1, 2, 3, and 4 connectors20A Connector Options:
EdisonStage Pin Grounded Twist-Lock
UL and cUL ListedPHYSICAL Fabricated of .125 aluminum
Finished with fine-textured, scratch-resistant,black powder coatCustom finishes available 3/4” labels with white numbers on blackbackground Surface mount back box available (3.5” deep)
O R D E R I N G I N F O R M A T I O N
Standard NEMA Outlet PanelsModel# Description RACO Back
Box Part #
9801B Stage Pin Panel, 1 outlet 6959802B Stage Pin Panel, 2 outlets 6969803B Stage Pin Panel, 3 outlets 6979804B Stage Pin Panel, 4 outlets 6989801C Twist-Lock Panel, 1 outlet 6959802C Twist-Lock Panel, 2 outlets 6979803C Twist-Lock Panel, 3 outlets 6999801A Edison Panel, 1 outlet 6959802A Edison Panel, 2 outlets 6969803A Edison Panel, 3 outlets 6979804A Edison Panel, 4 outlets 698