et1 practical final examination
TRANSCRIPT
![Page 1: Et1 practical final examination](https://reader036.vdocuments.us/reader036/viewer/2022082810/557e5b6bd8b42a15738b52a4/html5/thumbnails/1.jpg)
Question 1a. What is the most widely used semiconductor material? b. Which electrons are responsible for current in a material? c. Define doping? d. What is a pn junction? e. In a pn junction, briefly explain what the barrier potential is and how it is created? f. Briefly explain how to forward-bias a pn junction. g. Which bias condition produces majority carrier current?
Question 2a. What causes the ripple voltage on the output of a capacitor filter?b. Define ripple factor.c. The two diodes shown in Figure 2 can be assumed to have zero forward resistance and
infinite reverse resistance. Calculate the currents in each branch of the circuit.
d. If a sinusoidal waveform with a peak secondary voltage value of 20 V and frequency 100
Hz were to be applied to the inputs of a bridge rectifier circuit, sketch the output waveform that you would obtain from this circuit. Label the values for the peak voltages of the input and output waveform.
Question 3a. Determine the output voltage waveform.
b. Briefly discuss how diode clippers and diode clampers differ in their function.c. Briefly explain the terms line regulation. d. In what condition is an LED normally operated? e. Calculate the value of the current flowing through the Zener diode.
50
100
VZ = 2.1 VPZM = 0.5 W
+Vin = 10 VDC
![Page 2: Et1 practical final examination](https://reader036.vdocuments.us/reader036/viewer/2022082810/557e5b6bd8b42a15738b52a4/html5/thumbnails/2.jpg)
Question 4
a. Derive the relationship between and . b. Calculate and .
c. The transistor has the following parameters: Forward current transfer function, ,
Input impedance, , and Output admittance,
By neglecting reverse voltage transfer function, , calculate the voltage and current gain.
d. Determine the ID and VDS.
VVCC 15
kΩ5.1BR