Multi Window Processor

ET-MWP100G

Turnkey Solution for Multi Window Presentations

Unique Layout and Canvas Concept Adds Impact to Multi-Screen Images

— Easy and Flexible Expandability with DIGITAL LINK Compatibility —

The ET-MWP100G Panasonic Multi Window Processor makes it pos-sible to quickly and efficiently combine multiple projectors and flat panel displays into a video wall or a multi vision system. Equipped with 16 slots for input/output terminals, the ET-MWP100G enables a combination of 5 optional interface boards, including a DIGITAL LINK output board, to support a variety of input sources and output devic-es. Interface boards are also easy to add or change, making the system highly flexible even after it has been configured. Images can

be split among multiple projectors or displays, and multi-windows (PinP) can be freely allotted in desired sizes, locations, inclinations and overlapping orders. Display patterns can be registered and switched by control software for Multi Window Processor, which is included with the ET-MWP100G, installed onto a PC. Even with inter-face boards mounted onto all 16 slots, the ET-MWP100G features low power consumption of 160 W*1 or less, helping to lower the total cost of ownership (TCO) in 24/7 continuous operation.

Layout and Canvas Concept

How the Layout and Canvas Work

Output Pattern Examples

A single image can be presented across multiple displays. Window layers can also be displayed.

Flat displays with different screen sizes can be set as a single “canvas,” and the image can be displayed at the same scale throughout.

*1 When using a single power supply unit. The power consumption becomes 180 W when the optional ET-RPS100G power supply unit is added.

An integrated screen can combine projector screens and displays.

LayoutDefines how each output is used. Outputs can be grouped together or used individu-ally, and can be independently rotated through 360° in real-time, without adding additional delay, for use in creative video wall applications. Multiple layouts can be used at the same time or one layout can be designed to tie multiple projectors or displays together as one large image. Up to 4 layouts can be used simultaneously.

Actual display units/projection screens From simple rectangles to complex for-mations, screens or display units can be configured into a variety of combinations.

WindowUp to 36 windows can be used to design a canvas with the capability to resize and rotate each window 360° on the can-vas. The order in which windows overlap can also be set.

Output image Images are displayed in the set windows.

Input sources Output on actual projection screens or display units.

Canvas designates how input images are output to screens or displays. To output the maximum full-screen area, the maximum canvas size is used.

Windows to show input images

Layout simulates the formation of actual projection screens or display units.

CanvasDesignates how input images are output to screens or displays. Multiple canvases can be used at the same time to define multiple lay-outs to aid in choreographing a video design. Up to 4 canvases can be stored to memory and recalled anytime during operation, which enables dynamic and impressive visual design.

Digital Signage Featuring TH-55LFV50 LED LCD DisplaysSOLUTION 1

Incorporating the ET-MWP100G into this system allows a vari-ety of content to be displayed with a highly flexible layout. It brings powerful impact and appeal to digital signage.

TH-55LFV50

Dedicated “Control Software for Multi Window Processor” suppliedSingle or multiple output layouts and multiple canvasesSimultaneous use of multiple layouts and canvases20 presets for canvas settingOne or more windows (PinPs) on each canvas with 360° rotation of each window16 interface board slotsEasy addition and replacement of optional interface boards*2

Low power consumption of max 160 W*3 with 16 interface boards mountedDIGITAL LINK compatibility (when the ET-MCQDL350 DIGITAL LINK board mounted)Capability of up to 28 inputs with the ET-MCYDV100 DVI-U and ET-MCYSD200 3G-SDI boardsUp to 56 inputs with the ET-MCYSD210 HD-SDI boardCapability of up to 28 outputs with the ET-MCQDV150 DVI-U and ET-MCQDL350 DIGITAL LINK boardsBezel area adjustment capable for flat panel displaysEdge Blending function for projectors

Large 55-inch LCD screen and high brightness of 800 cd/m2 makes the TH-55LFV50 ideal for installation in bright indoor placesSuper narrow bezel design for joints of only 5.3 mm (0.21˝ ) allows seamless large-screen layouts

A tough and reliable design meets the demands for multi-screen useSmart daisy-chain connection for easy operation

Major ET-MWP100G Features

TH-55LFV50 Features

Easy to Add or Replace Interface Boards.*2 Lower Power Consumption.

The ET-MWP100G Contributes to a Wide Variety of Multi-Screen Solutions

The ET-MWP100G Multi Window Processor can be used to build a wide range of creative, impressive images that were never before possible, including video walls, digital signage, surveillance systems, TV studio displays, and live stage screens.

*2 Ask a qualified technician or your dealer when installing or removing this product.*3 When using a single power supply unit. The power consumption becomes 180 W when

the optional ET-RPS100G power supply unit is added.NOTE: Photo shows the ET-MWP100G with optional interface boards and an

additional power supply unit mounted.

This video wall uses crisp, bright 55-inch LCD displays. The narrow bezel makes the displayed images easy to see and understand.

Optional interface board with 16 slots

ET-RPS100G Optional Power Supply Unit

Network/serial control interface for the ET-MWP100G

Rear panel

Built-in power supply unit

55

2

The ET-MWP100G’s optional interface boards support a wide variety of input sources. This makes it possible to connect to media servers, professional video cameras, and other devic-es. DIGTAL LINK compatibility also allows the input signals from these devices to be output to the PT-DZ870 over a single LAN cable*6.

The low power consumption of the ET-MWP100G helps to reduce the total cost of ownership (TCO). Reliability is also increased by mounting the optional ET-RPS100G power supply unit as a power backup. Combining this with the PT-RZ475 for 24/7 operation is recommended for surveillance or observation use where high reliability is demanded.

PT-RZ475

PT-DZ870

Control Room Featuring PT-RZ475 SOLID SHINE Projectors

Broadcast Studio Featuring PT-DZ870 DLP™ Projectors

SOLUTION 2

SOLUTION 3

This rear projection system uses projectors with an LED/Laser- combined light source to provide up to 10 years*4 of continuous operation.

This integrated system incorporates bright, high-quality edge blended projection screens. Various image sources allow flexible changes and display methods to match programming content.

Up to 10 years*4 (approximately 87,600 hours*5) of continuous operation24/7 operationDIGITAL LINK transmits digital signals up to 100 m (328 ft) with a single CAT5e (STP) cable or higher

3D projection and portrait mode capabilityPowered-focus, short-throw lens

Bright 8,500 lm and high 10,000:1*7 contrast ratio Dynamic RGB Booster strikes a balance between brightness and color reproductionDetail Clarity Processor 3 gives natural clarity to the finest detailsEdge blending, color matching and built-in multi-screen processor for seamless mutli-screen projection

Geometric Adjustment and optional Geometry Manager Pro for specially shaped screensDIGITAL LINK transmits digital signals up to 100 m (328 ft) with a single CAT5e (STP) cable or higher

PT-RZ475 Features

PT-DZ870 Features

*4 With LIGHT POWER set to Eco2. Parts other than the light source may require replacement in a shorter period.

*5 24 hours (1 day) × 365 days (1 Year) × 10 Years = 87,600 hours.

*6 CAT5e (STP) cable or higher. *7 Full on/off, with dynamic iris on.

3

Staging and Events Featuring High-Brightness Projectors and Flat Panel Displays

Configuring a system with the ET-MWP100G enables flexible combinations with a host of input devices and displays to match applications like exhibitions, live staging, and video conferences.

OTHER SOLUTIONS

Fashion show

System Connection Example

Video OutputVideo InputL AN

Multi Window ProcessorET-MWP100G

Rear projection multi-screen Integrated projection / display systemVideo wall

PC PC PC PC Camera

*8*8

*8 *8

Camera Camera Camera

Control PC

Teleconferencesystem

Professionalvideo camera

Blu-ray discplayer

Multi-screen projection system

* 8 Required to connect each output terminal of the ET-MWP100G with each projector or flat panel display. Up to 28 projectors can be simultaneously output via DIGITAL LINK. This illustration is intended only to show display patterns. These patterns cannot all be simultaneously output.

ET-MWP100G1 Printed in Japan.

All information included here is valid as of July 2013.

For more information about Panasonic projectors, please visit:Projector Global Web Site – panasonic.net/avc/projector

Facebook – www.facebook.com/panasonicprojectorYouTube – www.youtube.com/user/PanasonicProjector

Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. Product availability differs depending on region and country. This product may be subject to export control regulations. DLP is a trademark or a registered trademark of Texas Instruments. For more detailed information, please consult the dealer from whom you are purchasing the product. All other trademarks are the property of their respective trademark owners. Projection images simulated. © 2013 Panasonic Corporation. All rights reserved.

Specifications

100−240 V AC, 50/60 Hz

160 W max. (180 W with the ET-RPS100G)

16 slots (including two dedicated input slots and two dedicated output slots)

[Level A YPBPR 4:2:2 10-bit] SMPTE ST 424 compliant: 1125 (1080)/60p, 1125 (1080)/50p

[YPBPR 4:2:2 10-bit] SMPTE ST 292 compliant: 750 (720)/60p, 750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p, 1125 (1080)/24p, 1125 (1080)/30p[YCBCR 4:2:2 10-bit] SMPTE ST 259 compliant: 525i (480i), 625i (576i)

fH 15 .6 – 82.2 kHz, fV 24.0 – 85.1 Hz, dot clock: 25 .2 –162 MHzfH 15 .6 – 82.2 kHz, fV 24 – 85.1 Hz, dot clock: 162 MHz or lower525i (480i): fH 15.75 kHz; fV 60 Hz,625i (576i): fH 15.63 kHz; fV 50 Hz,525p (480p): fH 31.50 kHz; fV 60 Hz,625p (576p): fH 31.25 kHz; fV 50 Hz,750 (720)/60p: fH 45.00 kHz; fV 60 Hz,750 (720)/50p: fH 37.50 kHz; fV 50 Hz,1125 (1080)/60i: fH 33.75 kHz; fV 60 Hz,1125 (1080)/50i: fH 28.13 kHz; fV 50 Hz,1125 (1080)/25p: fH 28.13 kHz; fV 25 Hz,1125 (1080)/24p: fH 27.00 kHz; fV 24 Hz,1125 (1080)/30p: fH 33.75 kHz; fV 30 Hz,1125 (1080)/60p: fH 67.50 kHz; fV 60 Hz,1125 (1080)/50p: fH 56.25 kHz; fV 50 HzfH 15.75 kHz, fV 60 Hz [NTSC], fH 15.63 kHz, fV 50 Hz [PAL]

D-sub 9-pin (female) × 1 for external control (RS-232C compliant)RJ-45 × 1 for external control, 100Base-TX/10Base-TType A × 1 (front), Type B × 1 (rear), for service

482 × 177 × 313 mm (18-31/32 × 6-31/32 × 12-5/16 in)

Approx. 9.6 kg (21.16 lbs) (when optional devices are mounted)

Operating temperature: 0– 40 °C (32–104 °F)*4, operating humidity: 10% – 85% (no condensation)

Power cord (× 3), software CD-ROM (Control Software for Multi Window Processor)

With the ET-MCYSD200 SDI 3G-SDI signal

With the ET-MCYSD200/MCYSD210 SDI HD-SDI signal

SD-SDI signal

With the ET-MCYDV100 DVI-U (digital)

DVI-U (analog)/RGB

YPBPR (YCBCR)

Video/S-Video

SERIAL IN

LAN USB

Power supply

Power consumption

Board mounting slots

Scanning frequency

Terminals

Dimensions (W × H × D)

Weight*3

Operating environment

Supplied accessories

DVI-U 29-pin × 2DVI 1.0 compliant, compatible with HDCP, for single link only525i (480i),*1 625i (576i),*1 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p, 1125 (1080)/24p, 1125 (1080)/30p, 1125 (1080)/60p, 1125 (1080)/50p,VGA (640 × 480)–WUXGA*2 (1,920 × 1,200), compatible with non-interlaced signals only, dot clock: 25 –162 MHzR, B: 0.7 Vp-p, G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohmsHD, VD/SYNC: TTL, high impedance, positive/negative automaticY: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohmsY: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohmsY: 1.0 Vp-p, 75 ohms

BNC × 2SMPTE ST 424 compliantSMPTE ST 292 compliantSMPTE ST 259 compliant

BNC × 4SMPTE ST 292 compliantSMPTE ST 259 compliant

DVI-U 29-pin × 2DVI 1.0 compliant, compatible with HDCP

RJ-45 × 2RJ-45 × 1 for network connection, 100Base-TX/10Base-T

DVI-U IN Digital

RGB

YPBPR (YCBCR)

S-Video Video

SDI IN 3G-SDI HD-SDI SD-SDI

SDI IN HD-SDI SD-SDI

DVI-U OUT Digital RGB/YPBPR (YCBCR)

DIGITAL LINK OUT LAN

ET-MCYDV100

ET-MCYSD200

ET-MCYSD210

ET-MCQDV150

ET-MCQDL350

*1 Only compatible with dot clock frequency of 27 MHz (pixel repeti t ion signal)*2 Compatible with VESA CVT-RB (Reduced Blanking) signals only*3 Average value. May dif fer depending on models.*4 At alt i tudes of 1,400 m (4,593 ft ) or more, the operat ing temperature range is 0°C to

35°C (32°F to 95°F).

ET-MWP100G Optional Interface Boards

313

(12-

5/16

)

177

(6-3

1/32

)

436 (17-5 /32 )

482 (18-31/32 )

294

(11-

9/1

6)

ET-MWP100G Dimensions un i t : mm ( inches )

1. Do not install the ET-MWP100G in locations that are subject to excessive water, humidity, steam, or oily smoke. Doing so may result in f ire, malfunction, or electric shock.

2. Never place objects on top of the ET-MWP100G while it is operation.

NOTES ON USE

ET-MCYDV100 DVI-U Board

ET-MCQDV150 DVI-U Board

ET-MCYSD200 3G-SDI Board

ET-MCQDL350 DIGITAL LINK Board

control and network connection

ET-MCYSD210 HD-SDI Interface Board

ET-RPS100G Power Supply Unit

Options