establishment - central institute of hand tools, · web viewproximity sensor that detects the...

NOTICE INVITING TENDERS

Sealed tenders in triplicate (Technical & Commercial separately for Items at Sr. No.01 to 04 and Techno-Commercial combined for remaining items from Sr. No. 05 to 16) are invited from the reputed suppliers /manufacturers for the supply of the following items:

01. Forging Simulation Software with required Hardware - 01 Set02. CAM Software Work NC (Educational Version) - 01 Set03. Auto CAD Inventor Professional Software-2010 (Educational Version) - 01 Set04. Unigraphic NX CAD/CAM Software (Latest Educational Version) - 01 Set05. Basic Pneumatic Training Kit with Compressor & its Accessories - 01 No.06. Customised Hydraulic Training Kit - 01 No.07. PLC Supplimentary for Electro Pneumatic - 01 No.08. Simulation Software for Pneumatic and Hydraulic Kits - 01 No.09. Training Media (Text & Work Book) - 01 No.10. Electro-Pneumatic Supplimentary Training Kit - 01 No.11. Easy Port for Integration of Software & Hardware of Trainer Kit - 01 No.12. (i) PLC Model: CPU-313-C - 01 No.

(ii) 3 Phase 3 H.P. Drive Micro Master - 01 No.13. Digital & Analog Software for CKT Design alongwith Design Kit - 01 No.14. (i) 8051 Compiler Software - 01 No. (ii) USB Data Acquisition - 01 No.

(iii) Biometric Application System - 01 No.(iv) PC Based Digital Experimental Board - 01 No.

(v) Digital Breadboard IC Training - 01 No.15. (i) Proteus Compatible Simulation Software & Hardware - 01 No.

(ii) Zig Bee Wireless Application System - 01 No.16. (i) WI-FI Application Kit - 01 No. (ii) Embedded 8051 TCP/IP Application Board - 01 No. (iii) GPS Development System - 01 No.

The tender documents containing detailed specifications and terms and conditions can be had from the office of the Principal Director, Central Institute of Hand Tools, Jalandhar on payment of Rs.500/- (Non Refundable) in cash. If the tender document is required by post, Rs.550/- be sent through Bank Draft in favour of “Central Institute of Hand Tools” payable at Jalandhar. The tender documents can also be downloaded from our Website: www.ciht.in and the party will have to pay Rs.500/- by means of demand draft at the time of submission of tender documents. The Tenders duly filled in must reach in the Institute on or before 10 th September, 2009 before 11.00 A.M.

The Technical Bids for items at Sr. No.01 to 04 and techno commercial bids for remaining items shall be opened on the same date i.e. 10 th September, 2009 at 2.00 P.M in the presence of the tenderers or their authorised representatives.

Sd/-PRINCIPAL DIRECTOR

No. CIHT:JAL:P:499(Vol.iv): Dated: / / 2009(In reply, please quote this number)

Messers _________________________________________________________________________________________________________

Subject: TENDER DOCUMENTS.

Dear Sir,

Sealed tenders (Technical & Commercial separately) are invited in triplicate from the manufacturers / suppliers for the purchase of following:

01. Forging Simulation Software with required Hardware - 01 Set.

A set of tender documents containing detailed specifications including terms and conditions for the purchase of Forging Simulation Software with required Hardware is attached herewith as Annexure-I.

You are requested to fill up the tender document strictly as per the enclosed format. The specifications of the item offered by you must be indicated against our required specifications.

Last date for receipt of tenders duly complete in all respects is 10 th September, 2009 before 11.00 A.M. The technical bids shall be opened on the same date at 2.00 P.M. in the presence of the tenderers or their authorised representatives.

Thanking you, Yours faithfully,

[M.L. SAHANI]Officer Incharge (Purchase)

For PRINCIPAL DIRECTOREncls.: As above.

ANNEXURE-I

Sr. No.

Desctiption of Item Required by CIHT, Jalandhar

01. TECHNICAL SPECIFICATIONS OF FORGING SIMULATION SOFTWARE WITH REQUIRED HARDWARE:

(i) 15 Pre and 15 Post Processor with Solver

(ii) Software should have the following process:- Hot Forging- Cold Forging- Ring Rolling- Heat Treatment

(iii) Software should have automatic optimization

(iv) Software should be capable to do the following:- The prediction of material flow- Analysis of contact of the dies- Analysis of velocities and displacements- The prediction of defects in the part, folds, cracks & under fills.

(v) The accurate analysis of the final part geometry, spring back, dies deformation.

(vi) Software should be capable to analysis of the part through the whole forming process, temperature distribution, stress and residual stress evolution, strain distribution.

(vii) Software should be help to the optimization of forging sequence: Stage number reduction, reduction of material weight.

(viii)

Software should be capable to optimization of die life, stress prediction, abrasive wear prediction, temperature evolution.

(ix) Software should be capable to do the open die forging calculation like cogging operation.

(x) Software should be capable to do the electrical upsetting for perform.

(xi) Software should be capable to do simulate and Display the defect shape, size and location accurately.

(xii) Quote required Hardware for above said software with specification and lowest price.

Cond. .. 2…

(2)

TERMS & CONDITIONS: 01. The Technical & Commercial tender / quotation should be submitted in triplicate.02. The rates quoted should be F.O.R. destination.03. The tender / quotation should remain valid for 90 days from the date of opening of the tender.04. The tender / quotation should be made in lumpsum price separately for any / each item.05. In case available on DGS&D rate contract, please attach valid Registration Certificate.06. 90% Payment shall be made against delivery at CIHT and remaining in one month after

installation, commissioning, successful trial, functioning & training of the offered item at CIHT, Jalandhar.

07. (a) The tender / quotation must accompany demand draft / pay order amounting Rs.35,000/- (Rupees Thirty Five Thousand only) in the name of the Principal Director, Central Institute of Hand Tools payable at Jalandhar towards lumpsum amount of Earnest Money (Refundable). The Earnest Money must be attached with the Technical Bid. The same will be forfeited, if the execution of the order is not made in time. The offers without Earnest Money Deposit will be considered as unresponsive and will be rejected. (b) Parties registered with DGS&D or NSIC under Government Store purchase programme are exempted from the payment of Earnest Money. A photocopy of the Registration Certificate must be attached with the Technical Bid.

08. The Principal Director, Central Institute of Hand Tools, Jalandhar does not undertake any responsibility for non receipt / loss in transit or late receipt of tenders and also reserves the right to reject any or all the tenders either in part or full without assigning any reason thereof.

09. The tender / quotation should be duly sealed and addressed to The Principal Director, Central Institute of Hand Tools, G.T. Road, Bye Pass, Opp. Shaheed Bhagat Singh Colony, Jalandhar City as “TENDER/ QUOTATION FOR THE SUPPLY OF FORGING SIMULATION SOFTWARE WITH HARDWARE” and should reach this office latest by 10 th September, 2009 before 11.00 a.m. The technical bids shall be opened on the same date at 2.00 p.m. in the presence of the tenderers or their authorised representatives.

10. The Purchase Committee has the right not to accept the lowest rates quoted by the suppliers/ manufacturers without assigning any reason.

11. Non fulfilling of any of the conditions, the tenders / quotations are liable to be rejected.12. The decision of the Purchase Committee shall be final and binding on all the parties.13. Conditional, late, incomplete and telegraphic tenders or tenders without earnest money shall not

be accepted. 14. The tender documents can also be downloaded from our Website: www.ciht.in and the party

will have to pay Rs.500/- by means of demand draft at the time of submission of tender.15. The manufacturers / suppliers should clearly mention about the following points:

(i) Price quoted is on F.O.R. Destination basis or Ex-Works basis(ii) Excise Duty(iii) Custom Duty(iv) Central Sales Tax / V.A.T.(v) Packing & Forwarding Charges(vi) Freight Charges(vii) Transit Insurance(viii) Installation & Commissioning Charges(ix) Place of Inspection(x) Delivery Period(xi) Guarantee / Warrantee / Support(xii) Validity of Offer(xiii) Whether Earnest Money Deposited or Registered with DGS&D / NSIC(xiv) Training to our Personnel(xv) Payment terms

16. All disputes are subject to Jalandhar jurisdiction.


For PRINCIPAL DIRECTOR

http://www.ciht.in/


Messers _________________________________________________________________________________________________________


Dear Sir,


01. CAM Software Work NC (Educational Version) - 01 Set.

A set of tender documents containing detailed specifications including terms and conditions for the purchase of CAM Software Work NC (Educational Version) is attached herewith as Annexure-I.






ANNEXURE-I

Sr. No.


01. TECHNICAL SPECIFICATIONS OF CAM SOFTWARE EDUCATIONAL VERSION (03 SEATS)WORK NC - V 19 Automatic 2, 2.5, 3 & 3+2 Axis Cam SoftwareIncluding the following:

(i) 3D Work NC Cad for Die Design and Analysis

(ii) Tool Path Visualizer and Tool Path Editor

(iii) Standard Translator – IGES, DWG, DXF

(iv) On Site Training for a period of three days

(v) One Year Software Support and Upgradation



07. (a) The tender / quotation must accompany demand draft / pay order amounting Rs.12,000/- (Rupees Twelve Thousand only) in the name of the Principal Director, Central Institute of Hand Tools payable at Jalandhar towards lumpsum amount of Earnest Money (Refundable). The Earnest Money must be attached with the Technical Bid. The same will be forfeited, if the execution of the order is not made in time. The offers without Earnest Money Deposit will be considered as unresponsive and will be rejected. (b) Parties registered with DGS&D or NSIC under Government Store purchase programme are exempted from the payment of Earnest Money. A photocopy of the Registration Certificate must be attached with the Technical Bid.


09. The tender / quotation should be duly sealed and addressed to The Principal Director, Central Institute of Hand Tools, G.T. Road, Bye Pass, Opp. Shaheed Bhagat Singh Colony, Jalandhar City as “TENDER / QUOTATION FOR THE SUPPLY OF CAM SOFTWARE WORK-NC (EDUCATIONAL VERSION)” and should reach this office latest by 10 th September, 2009 before 11.00 a.m. The technical bids shall be opened on the same date at 2.00 p.m. in the presence of the tenderers or their authorised representatives.



be accepted.

Contd…2…

(2)

14. The tender documents can also be downloaded from our Website: www.ciht.in and the party will have to pay Rs.500/- by means of demand draft at the time of submission of tender.

15. The manufacturers / suppliers should clearly mention about the following points:(i) Price quoted is on F.O.R. Destination basis or Ex-Works basis(ii) Excise Duty(iii) Custom Duty(iv) Central Sales Tax / V.A.T.(v) Packing & Forwarding Charges(vi) Freight Charges(vii) Transit Insurance(viii) Installation & Commissioning Charges(ix) Place of Inspection(x) Delivery Period(xi) Guarantee / Warrantee / Support(xii) Validity of Offer(xiii) Whether Earnest Money Deposited or Registered with DGS&D / NSIC(xiv) Training to our Personnel(xv) Payment terms




http://www.ciht.in/


Messers _________________________________________________________________________________________________________


Dear Sir,


01. Auto Cad Inventor Professional – 2010 (Educational Version) - 01 Set.

A set of tender documents containing detailed specifications including terms and conditions for the purchase of Auto Cad Inventor Professional-2010 is attached herewith as Annexure-I.






ANNEXURE-I

Sr. No.


01. TECHNICAL SPECIFICATIONS OF AUTO CAD INVENTOR PROFESSIONAL-2010 (30 SEATS)30 User Pack, Educational Version,With Two Years Subscription 2011 & 2012.



07. (a) The tender / quotation must accompany demand draft / pay order amounting Rs.15,000/- (Rupees Fifteen Thousand only) in the name of the Principal Director, Central Institute of Hand Tools payable at Jalandhar towards lumpsum amount of Earnest Money (Refundable). The Earnest Money must be attached with the Technical Bid. The same will be forfeited, if the execution of the order is not made in time. The offers without Earnest Money Deposit will be considered as unresponsive and will be rejected. (b) Parties registered with DGS&D or NSIC under Government Store purchase programme are exempted from the payment of Earnest Money. A photocopy of the Registration Certificate must be attached with the Technical Bid.


09. The tender / quotation should be duly sealed and addressed to The Principal Director, Central Institute of Hand Tools, G.T. Road, Bye Pass, Opp. Shaheed Bhagat Singh Colony, Jalandhar City as “TENDER / QUOTATION FOR THE SUPPLY OF AUTO CAD INVENTOR PROFESSIONAL - 2010” and should reach this office latest by 10 th September, 2009 before 11.00 a.m. The technical bids shall be opened on the same date at 2.00 p.m. in the presence of the tenderers or their authorised representatives.





(i) Price quoted is on F.O.R. Destination basis or Ex-Works basis(ii) Excise Duty(iii) Custom Duty(iv) Central Sales Tax / V.A.T.(v) Packing & Forwarding Charges(vi) Freight Charges(vii) Transit Insurance

Contd..2…

http://www.ciht.in/

(2)

(viii) Installation & Commissioning Charges(ix) Place of Inspection(x) Delivery Period(xi) Guarantee / Warrantee / Support(xii) Validity of Offer(xiii) Whether Earnest Money Deposited or Registered with DGS&D / NSIC(xiv) Training to our Personnel(xv) Payment terms





Messers _________________________________________________________________________________________________________


Dear Sir,


01. Unigraphics NX Cad/Cam Software (Latest Educational Version) - 01 Set.

A set of tender documents containing detailed specifications including terms and conditions for the purchase of Unigraphics NX Cad/Cam Software (Latest Educational Version) is attached herewith as Annexure-I.






ANNEXURE-I

Sr. No.


01. TECHNICAL SPECIFICATIONS OF UNIGRAPHICS NX CAD/CAM SOFTWARE (10 SEATS)Latest Educational Version which includes:

Gateways, Freedom Modeling, Drafting, Solid Modeling, Surface Modeling, Assembly, Feature Modeling, IGES Translator, Step AP203 Translator, Step AP204 Translator, Manufacturing 3 Axis, 4th & 5th Axis with Sheet Metal etc.



07. (a) The tender / quotation must accompany demand draft / pay order amounting Rs.18,000/- (Rupees Eighteen Thousand only) in the name of the Principal Director, Central Institute of Hand Tools payable at Jalandhar towards lumpsum amount of Earnest Money (Refundable). The Earnest Money must be attached with the Technical Bid. The same will be forfeited, if the execution of the order is not made in time. The offers without Earnest Money Deposit will be considered as unresponsive and will be rejected. (b) Parties registered with DGS&D or NSIC under Government Store purchase programme are exempted from the payment of Earnest Money. A photocopy of the Registration Certificate must be attached with the Technical Bid.


09. The tender / quotation should be duly sealed and addressed to The Principal Director, Central Institute of Hand Tools, G.T. Road, Bye Pass, Opp. Shaheed Bhagat Singh Colony, Jalandhar City as “TENDER / QUOTATION FOR THE SUPPLY OF UNIGRAPHICS NX CAD/CAM SOFTWARE” and should reach this office latest by 10 th September, 2009 before 11.00 a.m. The technical bids shall be opened on the same date at 2.00 p.m. in the presence of the tenderers or their authorised representatives.




will have to pay Rs.500/- by means of demand draft at the time of submission of tender.

Contd..2…

http://www.ciht.in/

(2)






Messers _________________________________________________________________________________________________________


Dear Sir,

Sealed Techno-Commercial tenders are invited in triplicate from the manufacturers /suppliers for the purchase of following:

01. Basic Pneumatic Training Kit with Compressor & its Accessories - 01 No.

A set of tender documents containing detailed specifications including terms and conditions for the purchase of Basic Pneumatic Training Kit with Compressor & its Accessories is attached herewith as Annexure-I.


Last date for receipt of tenders duly complete in all respects is 10 th September, 2009 before 11.00 A.M. The techno commercial bids shall be opened on the same date at 2.00 P.M. in the presence of the tenderers or their authorised representatives.




ANNEXURE-I

SPECIFICATIONS OFPNEUMATICS TRAINER KIT (BASIC LEVEL):

The Pneumatic Training Kit (Basic Level) shall be capable of being used to demonstrate the design, construction and application of pneumatic components and circuits.

The kit shall be capable of being used to demonstrate the following:

Design and function of a pneumatic system – Basic Function and identification of pneumatic components and their symbols Direct and indirect manual controls, stroke dependant controls, time

dependant with time delay valves and pressure dependant controls with pressure sequence valves.

Logic AND / OR function to start signals Application and fault findings of pneumatic controls Functional diagrams Sequence Controls Methods for the drafting of circuit diagrams for pneumatic controls

The components shall be capable of being mounted on an aluminum profile plate of size 1100mm X 700mm with grooves for secure and flexible positioning so that the components should be clamped firmly, quickly & safely through quick fix adapters. This should ensure flexibility in conducting experiments through varies exercises.

Pneumatic Plug in type flexible connectors shall be safe & airtight, usage for multiple applications. These shall be with precision quick connector for plastic tubing 4 mm x 0.75 and for internal or external diameter calibrated tubes. (unless specified against individual item).

Good quality tubing in different colors for greater clarity in training.

Industrial components shall be used in the kit so that the students get hands on practical training in using Industrial components.

The kit shall be modular and upgradable so that future investments to higher levels of training are reduced.

The Basic Pneumatic kit shall contain components as per the attached list.

Contd…2…

(2)

1. Profile plates & stand:All the components should fit securely and safely onto the anodized aluminum profile plate. Both sides have grooves and, if required, both sides can be equipped. The grooves are compatible with the ITEM profile system. Side caps included.Grid dimensions 50 mmSize 1100 x 700 mmFor installation should be on tables with appropriate rubber feet.

2. 3/2-way valve with pushbutton actuator N.C. assy.:Design directly actuated, one side, with return springPressure range (-0.9 – 8 bar)Nominal flow rate 1...2 60 l/min`

3. 3/2-way valve with pushbutton actuator N.O. assy.:Design – directly actuated, one side, with return springPressure range (3.5 – 8 bar)Nominal flow rate 1…2 120 l/min

4. 5/2-way panel mounted valve assy.:The valves should be actuated by rotating the selector switch. When the selector switch is released, the current circuit state is retained.

Design – Directly actuated, one side, with return spring

Pressure range (0 – 8 bar)Nominal flow rate 1...2 95 l/min

5. Pressure gauge assy.:The pressure gauge shows the pressure in pneumatic control circuits.Design Bourdon tube pressure gaugeDisplay range (0 – 16 bar)

6. Quick-exhaust valve assy.:Quick-exhaust valve with built-in silencer.Design Poppet valvePressure range (0.5 – 10 bar)Nominal flow rate 1...2 960 l/minNominal flow rate 2...3 1100 l/min

7. 3/2-way roller lever valve, idle return N.C. assy.:The roller lever valve with idle return should be actuated when the roller lever is traversed by the cam of a cylinder in a certain direction. After release of the roller lever, the valve is returned to its initial position by a return spring. When traversed in the reverse direction, the roller lever has an idle return and the valve is not actuated.Design Poppet valve, directly actuated, one side, with return spring Pressure range (-0.9 – 8 bar)Nominal flow rate 1...2 80 l/min

Contd…3…

(3)

8. 3/2-way roller lever dir. Act. N.C. assy.:The roller lever valve should be actuated when the roller lever is pressed, for example by the cam of a cylinder. After release of the roller lever, the valve is returned to its initial position by a return spring.Design Poppet valve, directly actuated, one side,

with return springPressure range (-0.9 - 8 bar)Nominal flow rate 1...2 80 l/min

9. 5/2-way valve, pneumatically actuated, single sided assy.:The pneumatic single piloted valve should be actuated by pneumatic signals, and following removal of the signal is returned to its initial position by a return spring.Design Directly actuated one side, with return springPressure range (0 – 10 bar)Nominal flow rate 1...2 500 l/minNominal flow rate 1...4 500 l/minResponse time Optimum

10. 5/2-way valve, pneumatically actuated, dbl. sided, assy.:The pneumatic double pilot valve should be reversed by pneumatic signals from alternate sides. The circuit state is retained after removal of the signal until the next counteracting signal.Design Directly actuated, both sidesPressure range (0 – 10 bar)Nominal flow rate 1...2 500 l/minNominal flow rate 1...4 500 l/minResponse time - Optimum

11. Shuttle valve (OR) assy.:The shuttle valve should be switched through to the output by applying compressed air to one of the inputs (OR function).Design OR gate (shuttle valve)Pressure range (1 – 10 bar)Nominal flow rate 500 l/min

12. Dual-pressure valve (AND):The dual-pressure valve should be switched through to the output by applying compressed air to both of the inputs (AND function).Design AND gate (dual-pressure valve)Pressure range (1 – 10 bar)Nominal flow rate 550 l/min

13. Time-delay valve / adjust N.C. assy.:The time delay should be set with an adjusting screw (infinitely variable).Design Return springPressure range (2.5 – 8 bar)

Nominal flow rate 1...2 92 l/minDelay 5 s

Contd…4…

(4)

14. One-way flow control valve assy.:The one-way flow control valve should be a combination of flow control valve and a non-return valve. The cross-section of the restrictor can be set by means of a knurled screw.Design Combined flow control valvePressure range (0.5 – 10 bar)Nominal flow rate - 0 – 220 LPM

15. Pressure sequence valve assy.:The pressure of the control signal should be set by means of the pressure setting screw (infinitely variable).Design Poppet valve with return springOperating pressure range (1.8 – 8 bar)Control pressure range (1 – 8 bar)Nominal flow rate 1...2 100 l/min

16. Single-acting cylinder assy.:Design Piston cylinderOperating pressure 10 barStroke length Maximum 50 mmThrust at (6 bar) 169 NSpring return force minimal 13.65 N

17. Double-acting cylinder assy.:Design Piston cylinderOperating pressure (10 bar)Stroke length Maximum 100 mmThrust at (6 bar) 188.5 NReturn thrust at (6 bar) 158.3 N

18. Manifold assy.:Manifold with six ( 2 x 3)self-closing non-return valves. A common manifold (QS-6) for plastic tubing allows supply of compressed air to the control via six Individual ports (QS-4 for plastic tubing PUN 4 x 0.75).

19. Filter regulator with gauge assy.Filter control valve with pressure gauge, start-up valve, quick push-pull connectors and quick couplings, mounted on a swivel support.The filter with water separator removes dirt, pipe sinter, rust and

condensed water.The pressure control valve regulates the supply air pressure to the set operating pressure and compensates pressure fluctuations. The filter bowl has a condensate drain valve.

The start-up valve/shutoff valve ventilates and vents the entire control. The 3/2 way valve is actuated by a rotary button.Design Sintered filter Nominal flow rate 750 l/minInput pressure Maximum (16 bar)Output pressure Maximum (12 bar)Grade of filtration 40 µmCondensate quantity 22 cm3Connector G 1/8,

Contd…5….

(5)

20. Pressure regulator valve with gauge assy.The pressure regulator valve with gauge regulates the supply air pressure to the set operating pressure and compensates pressure fluctuations.Design Diaphragm regulator valveNominal flow rate 800 l/minInput pressure (16 bar)Working pressure (12 bar)

Connection Component Set, various quick push-pull connectors- Connectors

21. Plastic tubing:PUN 4 x 0.75Exterior diameter 4 mmInterior diameter 2.8 mmMetallic silver 10 m

22. T-connectors:These shall be for branching of the tubes for making circuitry.

23. Connection component Set:Spare sets of these connection components shall be supplied

SPECIFICATIONS OF COMPRESSOR:

Compressor:

Noise level 40 dBPressure maximum 800 kPa(8 bar)Free air delivery 50 l/minReservoir capacity 25 lElectric motor 230 V/50 Hz, 0.34 kw

Accessories:Quick coupling socketQuick coupling plug, tubing

Contd…6…

(6)

TERMS & CONDITIONS: 01. The Techno Commercial tender / quotation should be submitted in triplicate.02. The rates quoted should be F.O.R. destination.03. The tender / quotation should remain valid for 90 days from the date of opening of the tender.04. The tender / quotation should be made in lumpsum price separately for any / each item.05. In case available on DGS&D rate contract, please attach valid Registration Certificate.06. 90% Payment shall be made against delivery at CIHT and remaining in one month after


07. (a) The tender / quotation must accompany demand draft / pay order amounting Rs.3,500/- (Rupees Three Thousand & Five Hundred only) in the name of the Principal Director, Central Institute of Hand Tools payable at Jalandhar towards lumpsum amount of Earnest Money (Refundable). The Earnest Money must be attached with the Techno Commercial Bid. The same will be forfeited, if the execution of the order is not made in time. The offers without Earnest Money Deposit will be considered as unresponsive and will be rejected. (b) Parties registered with DGS&D or NSIC under Government Store purchase programme are exempted from the payment of Earnest Money. A photocopy of the Registration Certificate must be attached with the Technical Bid.


09. The tender / quotation should be duly sealed and addressed to The Principal Director, Central Institute of Hand Tools, G.T. Road, Bye Pass, Opp. Shaheed Bhagat Singh Colony, Jalandhar City as “TENDER/ QUOTATION FOR THE SUPPLY OF BASIC PNEUMATIC TRAINING KIT WITH COMPRESSOR & ITS ACCESSORIES” and should reach this office latest by 10 th September, 2009 before 11.00 a.m. The Techno Commercial bids shall be opened on the same date at 2.00 p.m. in the presence of tenderers or authorised representatives.





(i) Price quoted is on F.O.R. Destination basis or Ex-Works basis(ii) Excise Duty(iii) Custom Duty

http://www.ciht.in/

(iv) Central Sales Tax / V.A.T.(v) Packing & Forwarding Charges(vi) Freight Charges(vii) Transit Insurance(viii) Installation & Commissioning Charges(ix) Place of Inspection(x) Delivery Period(xi) Guarantee / Warrantee / Support(xii) Validity of Offer(xiii) Whether Earnest Money Deposited or Registered with DGS&D / NSIC(xiv) Training to our Personnel(xv) Payment terms





Messers _________________________________________________________________________________________________________


Dear Sir,


01. Customised Hydraulic Training Kit - 01 No.

A set of tender documents containing detailed specifications including terms and conditions for the purchase of Customised Hydraulic Training Kit is attached herewith as Annexure-I.






ANNEXURE-I

SPECIFICATIONS OFCUSTOMISED HYDRAULIC TRAINER KIT:

The Hydraulic Training Kit (Customised) shall be capable of being used to demonstrate the design, construction and application of Hydraulic components and circuits.

The kit should be capable of being used to demonstrate the following: Design and function of a Hydraulic System – Basic Design and Function of Valves Symbols in accordance to ISO 1219 Basic Circuit Diagrams on practical applications Hydraulic controls with pilot operated valves Hydraulic reservoirs, flow distributors etc

The components shall be capable of being mounted on an appropriate profile plate with grooves for secure and flexible positioning so that the components can be clamped firmly, quickly & safely through quick fix adapters. This should ensure flexibility in conducting experiments through varies exercises.

All Hydraulic connections shall be with self-closing, quick connector, safety clamping and quick plug in locking system for profile panels (unless specified against individual item). The couplings should be leak proof, which is self-sealing when decoupled and when coupled, should ensure a tight hydraulic connection. During the coupling process only the face of the coupling should be coated with oil.


The kit shall be modular and upgradeable so that future investments to higher levels of training are reduced.

The operating pressures in general shall be as given below unless otherwise specified against individual item:

1. Operation Pressure P : 6 MPa ( 60 Bar)2. Max. Permissible pressure Pmax : 12 Mpa (120 Bar)

The kit shall contain components as per the attached list.

Contd…2…

(2)

1. Profile PlateAll the components fit securely and safely onto the profile plate.The grooves are compatible with the ITEM profile system. Side caps are included.Grid dimensions 50 mmSize 1100 x 700 mm

2. Profile plate frame for inclined profile plate mount:Profile plate should be supplied & shall be with mounting parts

3. Hydraulic Power PackThe power pack should be of the external gear pump type with a single pump. The motor with the hydraulic power pack is AC, single phase, 230 V, 0.65 W power rating, frequency 50 Hz, actuation should be manual via ON/OFF switch, the delivery rate at nominal speed is 2.2 lpm at 1320 min-1, operating pressure is 6 Mpa (60 Bar), oil tank capacity is 5 liters, duty cycle is 50%, dimensions are 580 x 300 x 180 mm, weight should be around 20 kg.

4. Hydraulic Oil (HLP 22):Hydraulic Oil should be as per DIN 51524 standards. This shall be supplied in a 10 liters

can.

5. Standard hoses with quick connectors:The high-pressure hose should be made of three layers. The innermost layer is of Synthetic rubber, followed by a wire mesh and sheath of abrasion-resistant synthetic rubber. The two coupling sockets are self-sealing when decoupled. When used with a coupling nipple, the coupling sockets form a highly sealed connection. The arrangement should be such that only when the hoses are unpressurised, coupling and decoupling is possible.Nominal size 6 mmOperating pressure p 6 MPa (60 bar)Max. permissible pressure pmax 12 MPa (120 bar)Temperature range -40 – +125 °CBending radius, minimal 100 mmHose length 600 mmHose length 1000 mmHose length 1500 mmThe appropriate no. of hoses/hose lengths as per the above specifications are quoted.

6. Double-acting cylinderDouble-acting cylinder should be with control cam and two barbed fittingsPiston diameter 16 mmPiston rod diameter 10 mm, with M8 threadStroke 200 mmOperating pressure p 6 MPa (60 bar)Max. permissible pressure pmax 12 MPa (120 bar)

7. 4/2-way hand lever valveOperating pressure p 6 MPa (60 bar)Max. permissible pressure pmax 12 MPa (120 bar)Actuation Manual

Contd..3…

(3)

8. Pressure sequence valve, pressure relief valveThe valve should be capable of being used as a pressure relief valve if port T is connected to the tank and as a pressure sequence valve if port T is connected to another power component, such as a cylinder.Operating pressure p 6 MPa (60 bar)Max. permissible pressure pmax 12 MPa (120 bar)Adjustment ManualActuation Hydraulic

9. Check valve:Operating pressure p 6 MPa (60 bar)Max. permissible pressure pmax 12 MPa (120 bar)Actuation Hydraulic

10. Shut-off valveShut-off valve should be with two ports. The valve should be capable of being inserted at any point to enable shutoff of flow.Operating pressure p 6 MPa (60 bar)Max. permissible pressure pmax 12 MPa (120 bar)Actuation Manual

11. One-way flow control valveNominal flow rate 9 l/minOpening pressure 70 kPa (0.7 bar)Operating pressure p 6 MPa (60 bar)Max. permissible pressure pmax 12 MPa (120 bar)Actuation Manual

12. Tee Connector:Branch Tee with three connections (1 socket, 2 nipples).The branch tee can be inserted at any point to create a branch.Operating pressure : 6 MPa (60 bar)Max.permissible pressure Pmax: 12 MPa (120 bar)

13. Two way flow control valveNominal Flow rate 9 l/minOperating pressure 6 MPa (60 bar)Max permissible pressure 12 MPa (120 bar)Actuation Manual

14. Pressure gaugeThe pressure gauge should be protected by a glycerin filling against pressure peaks, condensed water and the ingress of water during cleaning.Measurement range 0 – 10 MPa (0 – 100 bar)Accuracy 1.6 % of full-scale valueOperating pressure, static 3/4 of full-scale valueOperating pressure, dynamic 2/3 of full-scale valueActuation Hydraulic

Contd...4….

(4)

15. Hydraulic distributor plate:The hydraulic distributor plate accommodates 5 P or T outlets. The distributor plate should be equipped with a pressure gauge. The distributor plate is firmly mounted on the profile plate.Measurement range 0-10 MPa (0-100 bar)Accuracy 1.6% of full-scale valueOperating pressure, static ¾ of full-scale valueOperating pressure, dynamic 2/3 of full-scale valueActuation Hydraulic

16. Drip Tray:The drip tray shall be made of steel.

17. Pressure Relief Unit:The pressure relief unit should remove hydraulic clamping pressures without great expenditure of force.



07. (a) The tender / quotation must accompany demand draft / pay order amounting Rs.12,000/- (Rupees Twelve Thousand only) in the name of the Principal Director, Central Institute of Hand Tools payable at Jalandhar towards lumpsum amount of Earnest Money (Refundable). The Earnest Money must be attached with the Techno Commercial Bid. The same will be forfeited, if the execution of the order is not made in time. The offers without Earnest Money Deposit will be considered as unresponsive and will be rejected. (b) Parties registered with DGS&D or NSIC under Government Store purchase programme are exempted from the payment of Earnest Money. A photocopy of the Registration Certificate must be attached with the Technical Bid.


09. The tender / quotation should be duly sealed and addressed to The Principal Director, Central Institute of Hand Tools, G.T. Road, Bye Pass, Opp. Shaheed Bhagat Singh Colony, Jalandhar City as “TENDER/ QUOTATION FOR THE SUPPLY OF CUSTOMISED HYDRAULIC TRAINING KIT” and should reach this office latest by 10 th September, 2009 before 11.00 a.m. The Techno Commercial bids shall be opened on the same date at 2.00 p.m. in the presence of the tenderers or their authorised representatives.





Contd…5…

(5)





http://www.ciht.in/


Messers _________________________________________________________________________________________________________


Dear Sir,


01. PLC Supplimentary for Electro Pneumatic Trainer Kit - 01 No.

A set of tender documents containing detailed specifications including terms and conditions for the purchase of PLC Supplimentary for Electro Pneumatic Trainer Kit is attached herewith as Annexure-I.






ANNEXURE-A

SPECIFICATIONS OFPLC SUPPLEMENTARY FOR ELECTRO PNEUMATIC TRAINER KIT:

The Electro Pneumatic PLC Training Kit (Basic Level) Trainer Kit shall be capable of being used to demonstrate the design, construction and application of Electro Pneumatic components and circuits.


Design and function of a Electro Pneumatic PLC system – Basic Function and identification of Electropneumatic components and their symbols Direct and indirect manual controls, stroke dependant controls, time


Logic AND / OR function to start signals Application and fault findings of Electro Pneumatic controls with PLC Functional diagrams Systematic design of Electro Pneumatic with PLC Sequence Controls Methods for the drafting of circuit diagrams for Electro Pneumatic with PLC

controls Pneumatic Power Section – Electric Control Section

The components shall be capable of being mounted on an appropriate profile plate with grooves for secure and flexible positioning so that the components can be clamped firmly, quickly & safely through quick fix adapters. This shall ensure flexibility in conducting experiments through varies exercises.

Pneumatic Plug in type flexible connectors should be safe & airtight, usage for multiple applications. These should be with precision quick connector for plastic tubing 4 mm x 0.75 and for internal or external diameter calibrated tubes (unless specified against individual item)

Voltage 24 V DC

Multifunctional Electro – connectors for 4 mm laboratory plugs and jack plugs


The kit shall contain components as per the attached list.

Contd….2…

(2)

1. Proximity Sensor, Inductive:Proximity switch that detects the proximity of electrically conducting objects through a change in inductance and emits a signal. The proximity switch has a PNP output and is designed as a normally-open contact. A yellow LED indicates the status. The switch should be protected against polarity reversal, overload and short-circuit.Switching voltage 10 – 30 V DCNominal switching distance 4 mm (material S 235 JR)Switching frequency Maximum 800 HzOutput function Normally open contact, positive

switchingOutput current Maximum 400 mA

2. Proximity Sensor, Capacitive:Proximity sensor that detects the presence of any object by a change in capacitance and emits a signal. The proximity switch has a PNP output and is designed as a normally-open contact. A yellow LED indicates the status. The switch should be protected against polarity reversal, overload and short-circuit.Switching voltage 10 – 30 V DCNominal switching distance 4 mmSwitching frequency Maximum 100 HzOutput function Normally open contact, positive switchingOutput current Maximum 200 mA

3. Proximity Sensors, Optical:Proximity switch that responds to light signals and delivers an electrical signal. The switching distance can be adjusted by means of a potentiometer. The proximity switch has a PNP output and is designed as a normally-open contact. A yellow LED indicates the status. The switch should be protected against polarity reversal, overload and short-circuit.Switching voltage 10 – 30 V DCNominal switching distance 0 – 100 mm (adjustable)Switching frequency Maximum 200 HzOutput function Normally open contact, positive switchingOutput current Maximum 100 mA

3. Interfaces:

4 mm safety sockets Inputs: 12 (digital) Outputs: 8 (digital) SysLink (8 inputs/8 outputs, digital) RS232 programming interface 4 mm safety sockets for 24 V DC operating voltage Ethernet connection

5. Programming Cable between PLC & PC:PC to FEC – FC – 20- FST (RS 232)

6. Software (CD) for programming PLC:For programming ladder & statement list.

7. Plug in adapter:For securing components with plug-in feet to the aluminium profile plate.

Contd…3…

(3)



07. (a) The tender / quotation must accompany demand draft / pay order amounting Rs.2,000/- (Rupees Two Thousand only) in the name of the Principal Director, Central Institute of Hand Tools payable at Jalandhar towards lumpsum amount of Earnest Money (Refundable). The Earnest Money must be attached with the Techno Commercial Bid. The same will be forfeited, if the execution of the order is not made in time. The offers without Earnest Money Deposit will be considered as unresponsive and will be rejected. (b) Parties registered with DGS&D or NSIC under Government Store purchase programme are exempted from the payment of Earnest Money. A photocopy of the Registration Certificate must be attached with the Technical Bid.


09. The tender / quotation should be duly sealed and addressed to The Principal Director, Central Institute of Hand Tools, G.T. Road, Bye Pass, Opp. Shaheed Bhagat Singh Colony, Jalandhar City as “TENDER/ QUOTATION FOR THE SUPPLY OF PLC SUPPLIMENTARY FOR ELECTRO PNEUMATIC TRAINER KIT” and should reach this office latest by 10 th September, 2009 before 11.00 a.m. The Techno Commercial bids shall be opened on the same date at 2.00 p.m. in the presence of tenderers or their authorised representatives.







http://www.ciht.in/




Messers _________________________________________________________________________________________________________


Dear Sir,


01. Simulation Software for Pneumatic and Hydraulic Kits - 01 No.

A set of tender documents containing detailed specifications including terms and conditions for the purchase of Simulation Software for Pneumatic and Hydraulic Kits is attached herewith as Annexure-I.






ANNEXURE-I

SPECIFICATIONS OF SIMULATION SOFTWARE FOR PNEUMATIC AND HYDRAULIC KITS:

Simulation Software for Pneumatics and HydraulicsRealistic simulations in real time

- Calculation of pressure and flow rate, current and voltage- Calculation of piston speed taking into consideration all friction losses- Calculation of actual pressure drops at throttle points for example- Error messages for open circuits and drawing errors- Variable cylinder design and simulation for pulling and pushing loads

Learn – simulate – apply:Simulation Software in blended learning concepts

- Convenient project administration- Detailed description of all components, in some cases with colour

illustrations- Application examples in video CD format- Standard-compliant symbol libraries according to DIN ISO 1219- Ideal complement to learning programs- Variable network licences,software registration via Internet

The versatile software packageSimulation Software should be used to perform experiments, carry out simulations in real time and prepare lessons. It should also be used as a virtual modular control system and integrated into blended learning concepts. Version 3.6 now with many new functions and languages.

The lesson preparation tool- Windows functionality:drag and drop, copy and paste,context-sensitive

menus- Copying of text and graphics to Word and Powerpoint- Print preview, scaling and printing in all formats- Integrated slide show: basic circuits, animated sectional views, lesson units,

support for many Windows-compatible data formats (doc, ppt, avi, etc.)- Integrated fundamentals for pneumatics and hydraulics on video CD

Virtual modular control system- The Simulation Software should have Virtual modular control system.

Digital technology- 30 new symbols. Detailed descriptions of all new symbols in accordance

with Siemens LOGO! Soft.

Minicontroller with 8 I/OComplete minicontroller as a logic module with 8 inputs and 8 outputs that can access the EasyPort directly.

New convenient tools for electrical techniciansAutomatic current path numbering and logic element tables in the electrical circuits. Option to display terminal designations beside the electrical terminals.

Contd…2…

(2)

System requirements- PC with Win 95/98/2000/ME/XP/NT- At least Pentium II 133 MHz- 64 MB RAM- Sound card- 4-speed CD-ROM drive

New degrees of detail for simulationNew component: the easy throttle.Display of counter readings or time for all counter and time delay

components.

OPC and EasyPort –the gateway to the world of 24 volts

Simulation Software should also communicate with other applications for process simulation.

Network licence: mobile and flexibleOne individual network licence to install and use on any number of computers.



07. (a) The tender / quotation must accompany demand draft / pay order amounting Rs.2,000/- (Rupees Two Thousand only) in the name of the Principal Director, Central Institute of Hand Tools payable at Jalandhar towards lumpsum amount of Earnest Money (Refundable). The Earnest Money must be attached with the Techno Commercial Bid. The same will be forfeited, if the execution of the order is not made in time. The offers without Earnest Money Deposit will be considered as unresponsive and will be rejected. (b) Parties registered with DGS&D or NSIC under Government Store purchase programme are exempted from the payment of Earnest Money. A photocopy of the Registration Certificate must be attached with the Technical Bid.


09. The tender / quotation should be duly sealed and addressed to The Principal Director, Central Institute of Hand Tools, G.T. Road, Bye Pass, Opp. Shaheed Bhagat Singh Colony, Jalandhar City as “TENDER/ QUOTATION FOR THE SUPPLY OF SIMULATION SOFTWARE FOR PNEUMATIC & HYDRAULIC KITS” and should reach this office latest by 10 th September, 2009 before 11.00 a.m. The Techno Commercial bids shall be opened on the same date at 2.00 p.m. in the presence of tenderers or their authorised representatives.





Contd…3…

(3)





http://www.ciht.in/


Messers _________________________________________________________________________________________________________


Dear Sir,


01. Training Media (Text & Work Book) - 01 No.

A set of tender documents containing detailed specifications including terms and conditions for the purchase of Training Media (Text & Work Book) is attached herewith as Annexure-I.






ANNEXURE-I

SPECIFICATIONS OF TRAINING MEDIA (TEXT & WORK BOOK):

Sr. No. Description 01. TP 101 Basic Pneumatic Text Book.02. TP 101 Basic Pneumatic Work Book.03. TP 102 Advance Pneumatic Text Book.04. TP 102 Advance Pneumatic Work Book.05. TP 201 Basic Electropneumatic Text Book.06. TP 201 Basic Electropneumatic Work Book.07. TP 202 Advance Electropnuematic Work Book.08. TP 301 PLC Text Book.09. TP 301 PLC Work Book.10. TP 111 Closed Loop Pneumatic Work Book.11. TP 501 Basic Hydraulic Text Book.12. TP 501 Basic Hydraulic Work Book.13. TP 502 Advance Hydraulic Work Book.14. TP 511 Closed Loop Hydraulic Work Book.15. TP 601 Basic Electro hydraulic Text Book.16. TP 601 Basic Electro hydraulic Work Book.17. TP 602 Advance Electro Hydraulic Work Book.18. TP 701 Proportional Hydraulic Text Book.19. TP 701 Proportional Hydraulic Work Book.20. Work Book Servo Pneumatic Posiotioning.21. Manual Pneumatic Positioning.22. Text Book – Proximity Sensor.23. Work Book – Proximity Sensor.24. Work Book, Sensor & Displacement.25. Work Book, Force & Pressure.26. Gripper and their application.27. Clamping with Compressed Air and Vacuum.28. Modular Pick and Place Devices.29. Rationalization of small Workpiece feeding.30. Sensor application.31. Compressed Air as an Energy Carrier.32. Amazing world of Pneumatic.



07. (a) The tender / quotation must accompany demand draft / pay order amounting Rs.2,000/- (Rupees Two Thousand only) in the name of the Principal Director, Central Institute of Hand Tools payable at Jalandhar towards lumpsum amount of Earnest Money (Refundable). The Earnest Money must be attached with the Techno Commercial Bid. The same will be forfeited, if the execution of the order is not made in time. The offers without Earnest Money Deposit will be considered as unresponsive and will be rejected.

(b) Parties registered with DGS&D or NSIC under Government Store purchase programme are exempted from the payment of Earnest Money. A photocopy of the Registration Certificate must be attached with the Technical Bid.

Contd ..2…(2)


09. The tender / quotation should be duly sealed and addressed to The Principal Director, Central Institute of Hand Tools, G.T. Road, Bye Pass, Opp. Shaheed Bhagat Singh Colony, Jalandhar City as “TENDER/ QUOTATION FOR THE SUPPLY OF TRAINING MEDIA (TEXT & WORK BOOK” and should reach this office latest by 10 th September, 2009 before 11.00 a.m. The Techno Commercial bids shall be opened on the same date at 2.00 p.m. in the presence of tenderers or their authorised representatives.









http://www.ciht.in/


Messers _________________________________________________________________________________________________________


Dear Sir,


01. Electro Pneumatic Supplimentary Training Kit - 01 No.

A set of tender documents containing detailed specifications including terms and conditions for the purchase of Electro Pneumatic SupplimentaryTraining Kit is attached herewith as Annexure-I.






ANNEXURE-I

SPECIFICATIONS OF ELECTRO PNEUMATIC SUPPLIMENTARY TRAINER KIT:

The Electro Pneumatic Supplimentary Training Kit shall be capable of being used to demonstrate the design, construction and application of electro pneumatic components and circuits.


Design and function of a electro pneumatic system – Basic Function and identification of electro pneumatic components and their symbols Direct and indirect manual controls, stroke dependant controls, time


Logic AND / OR function to start signals Application and fault findings of electro pneumatic controls Functional diagrams Sequence Controls Methods for the drafting of circuit diagrams for electro pneumatic controls

The components shall be capable of being mounted on an aluminum profile plate of size 1100mm X 700mm with grooves for secure and flexible positioning so that the components can be clamped firmly, quickly & safely through quick fix adapters. This should ensure flexibility in conducting experiments through varies exercises.

Electro Pneumatic Plug in type flexible connectors shall be safe & airtight, usage for multiple applications. These shall be with precision quick connector for plastic tubing 4 mm x 0.75 and for internal or external diameter calibrated tubes. (unless specified against individual item).

Good quality tubing in different colors for greater clarity in training.


The kit shall be modular and upgradable so that future investments to higher levels of training are reduced.

The Electro Pneumatic kit shall contain components as per the attached list.

Contd…2…

(2)

1. Relay, three fold:The element contains a release-delay and a pickup-delay time relay. Both relays should be infinitely variable, using the rotary knob of the potentiometer.Contact set 2 makes, 2 breaksContact load Maximum 5 ACut-off load Maximum 100 WDelay 0.5 – 10 s adjustable

2. Signal Input, electrical:The device contains an illuminated pushbutton switch (control switch) and two illuminated pushbuttons (momentary contact switches) with terminals and two buses for power supply.Contact set 2 makes, 2 breaksContact load Maximum 1 APower consumption (Miniature bulb) 0.48 W

3. Proximity Switch Reed contact, electronic with cylinder attachment:

The proximity switch consists of a sensor, the mounting kit, and the cable. This proximity switch should a signal when it detects a magnetic field. The status is indicated by an LED.Switching voltage 10 – 30 V DCSwitching current Maximum 200 mASwitching power 6 WSwitch accuracy ±0.1 mm

4. 5/2 way Single solenoid valve with LEDThe status should indicated by an LED on the housing. The valve should equipped with a manual override. The electrical connections feature polarity-reversal protection for the LED and the suppressor circuit.Pneumatic technical data:Design Spool valve, pilot controlled, with

return springPressure range 250 – 800 kPa (2.5 – 8 bar)Response time at 600 kPa (6 bar) On: 20 ms, Off: 30 msNominal flow rate 1...2 and 1...4 500 l/minElectrical technical data:Power consumption 1.5 WDuty cycle 100 %

5. 5/2 Solenoid valve, double, with LED:The statuses should be indicated by LEDs on the housings. The valve should be equipped with two manual overrides. The electrical connections feature polarity-reversal protection for the LEDs and the suppressor circuits.Pneumatic technical data:Design Spool valve, with pilot controlPressure range 150 – 800 kPa (1.5 – 8 bar)Response time at 600 kPa (6 bar) 10 ms

Nominal flow rate 1...2 and 1...4 500 l/minElectrical technical data:Power consumption 1.5 WDuty cycle 100 %

Contd..3…

(3)

6. Pneumatic - electrical converter:The pneumatic-electrical converter should fulfill 3 functions:Pressure switch, vacuum switch, and differential pressure switch.Pneumatic technical data:Design Prestressed metal bellows initiatorPressure ranges:Pressure switch, connector P1 25 – 800 kPa (0.25 – 8 bar)Vacuum switch, connector P2 -20 – -80 kPa (-0.2 – -0,8 bar)Differential pressure switch:connectors P1...P2 -95 – 800 kPa (-0.95 – 8 bar)Hysteresis Maximum 25 kPa (0.25 bar)Electrical technical data:Switching current 400 mA

7. Limit Switch, left actuated:The electrical limit switch should comprise a mechanically operated microswitch. When the roller lever is pressed, for example by the control cam of a cylinder, the microswitch is actuated. The circuit should be closed or opened via the contacts. The microswitch should be wired as a normally-open, normally-closed or changeover contact.Contact load Maximum 5 ASwitching frequency Maximum 200 HzReproducible accuracy 0.2 mmSwitch travel 2.7 mmActuator force 5 N

8. Limit Switch, right actuated:The electrical limit switch should comprise a mechanically operated microswitch. When the roller lever is pressed, for example by the control cam of a cylinder, the microswitch is actuated. The circuit should be closed or opened via the contacts. The microswitch should be wired as a normally-open, normally-closed or changeover contact.Contact load Maximum 5 ASwitching frequency Maximum 200 HzReproducible accuracy 0.2 mmSwitch travel 2.7 mmActuator force 5 N

9. Power Supply Unit:Input voltage 230/115 V AC (47 – 63 Hz)Output voltage 24 V DC, short-circuit-proofOutput current Maximum 4.5 AConnection cable 1.3 m

Dimensions 115 x 155 x 200 mmWithout mains cableWith mains cable, suitable for:DE, FR, NO, SE, FI, PT, ES, AT, NL, BE, GR, TR, IT, DK, IR, IDUS, CA, Central America, BR, CO, YU, EC, KR, TW, TH, PH, JPGB, IE, MY, SG, UA, HKAU, NZ, CN, ARCHZA, IN, and in some cases for GB, PT, SG, AE, HK

Contd..4….

(4)

10. Plug in adapter:For securing components with plug-in feet to the aluminium profile plate.

11. Set of Cables: Flexible measuring lines, order individually or in a set.Color Quantity Length [mm] With 4 mm safety plugs With 4 mm jack-plugsRed 1 1500 376 941 258 252Red 3 1000 376 939 226 400Red 21 500 376 937 226 402Red 26 300 376 935 227 239Red 10 50 376 932 331 713Blue 1 1500 376 940 258 253Blue 3 1000 376 938 226 401Blue 12 500 376 936 226 403Blue 11 300 376 934 227 245Blue 10 50 376 931 331 714



07. (a) The tender / quotation must accompany demand draft / pay order amounting Rs.3,500/- (Rupees Three Thousand & Five Hundred only) in the name of the Principal Director, Central Institute of Hand Tools payable at Jalandhar towards lumpsum amount of Earnest Money (Refundable). The Earnest Money must be attached with the Techno Commercial Bid. The same will be forfeited, if the execution of the order is not made in time. The offers without Earnest Money Deposit will be considered as unresponsive and will be rejected. (b) Parties registered with DGS&D or NSIC under Government Store purchase programme are exempted from the payment of Earnest Money. A photocopy of the Registration Certificate must be attached with the Technical Bid.


09. The tender / quotation should be duly sealed and addressed to The Principal Director, Central Institute of Hand Tools, G.T. Road, Bye Pass, Opp. Shaheed Bhagat Singh Colony, Jalandhar City as “TENDER/ QUOTATION FOR THE SUPPLY OF ELECTRO PNEUMATIC SUPPLIMENTARY TRAINING KITS” and should reach this office latest by 10 th September, 2009 before 11.00 a.m. The Techno Commercial bids shall be opened on the same date at 2.00 p.m. in the presence of tenderers or their authorised representatives.





Contd...5…

(5)





http://www.ciht.in/


Messers _________________________________________________________________________________________________________


Dear Sir,


01. Easy Port for Integration of Software & Hardware of Trainer Kit - 01 No.

A set of tender documents containing detailed specifications including terms and conditions for the purchase of Easy Port for Integration of Software & Hardware of Trainer Kit is attached herewith as Annexure-I.






ANNEXURE-I

SPECIFICATIONS OF EASY PORT FOR INTEGRATION OF SOFTWARE & HARDWARE OF TRAINER KIT:

1. Easy port USB: 24 V power supply via separate screw terminals or via SysLink connectors Interface to PC (galvanically isolated): USB 2.0, RS 232. Up to 4 modules

should be connected via a USB hub. Transmission speed: 115 kbaud Analogue interface: sub-D 15-pin socket, 12 bit resolution, 4 analogue

inputs, 2 analogue outputs, sample frequency 0.5 kHz Digital interface: 16 digital inputs, 16 digital outputs on 2 x 24-pin

Centronics sockets with 8 digital inputs each (24 V), 8 digital outputs (24 V). 24 V power supply. Digital signals represented by LEDs

Large LCD display, display of channel, unit, trend and measured value (4 digits). Selection of the channel to be displayed and the units via keys.

Controllable via Activ-X control from Labview, C++ or Visual Basic

Scope of delivery EasyPort USB 24 V connecting cable on 4 mm safety plugs USB cable CD-ROM: EasyVeep®, EasyOPC driver, datasheet, Activ-X control, examples

of control using Labview

2. Syslink Box I/O:

The universal connection unit should connect all 4 mm safety plugs with the 24-pin system connector as per IEEE 488 (SysLink). So that, it should become a universal interface between units with 4 mm connection technology and devices equipped with SysLink connectors as per IEEE488:

Connection to an I/O terminal of an MPS® station via an I/O cable with SysLink connectors at both ends, order no. 034031

I/O coupling via the 4 mm laboratory connectors of a PLC using an open I/O cable (IEEE488 connector – bare wires), order no. 167122

Simple connection of actuators and sensors via 4 mm laboratory connectors with the EasyPort interface unit for ®

Inputs: 3 safety sockets each for 8 three-wire sensorsOutputs: 2 safety sockets each for 8 actuatorsConnections: 4 mm safety sockets for 24 V DC, SysLink connector (IEEE488) I/O status display: Via LED

TERMS & CONDITIONS: 01. The Techno-Commercial tender / quotation should be submitted in triplicate.

02. The rates quoted should be F.O.R. destination.03. The tender / quotation should remain valid for 90 days from the date of opening of the tender.04. The tender / quotation should be made in lumpsum price separately for any/each item.05. In case available on DGS&D rate contract, please attach valid Registration Certificate.06. 90% Payment shall be made against delivery at CIHT and remaining in one month after

installation, commissioning, successful trial, functioning & training of the item at CIHT, Jalandhar.

Contd…2…

(2)

07. (a) The tender / quotation must accompany demand draft/pay order amounting Rs.1,500/- (Rupees One Thousand & Five Hundred only) in the name of the Principal Director, Central Institute of Hand Tools payable at Jalandhar towards lumpsum amount of Earnest Money (Refundable). The Earnest Money must be attached with the Techno Commercial Bid. The same will be forfeited, if the execution of the order is not made in time. The offers without Earnest Money Deposit will be considered as unresponsive and will be rejected. (b) Parties registered with DGS&D or NSIC under Government Store purchase programme are exempted from the payment of Earnest Money. A photocopy of the Registration Certificate must be attached with the Techno Commercial Bid.


09. The tender/quotation should be duly sealed and addressed to The Principal Director, Central Institute of Hand Tools, G.T. Road, Bye Pass, Opp. Shaheed Bhagat Singh Colony, Jalandhar City as “TENDER/QUOTATION FOR THE SUPPLY OF EASY PORT FOR INTEGRATION OF SOFTWARE & HARDWARE OF TRAINER KIT” and should reach this office latest by 10 th September, 2009 before 11.00 a.m. The Techno Commercial bids shall be opened on the same date at 2.00 p.m. in the presence of tenderers or authorised representatives.







http://www.ciht.in/




Messers _________________________________________________________________________________________________________


Dear Sir,


01. PLC Model: CPU-313-C - 01 No. Annexure-I02. 3 Phase 3 H.P. Drive Micro Master -01 No. Annexure-II

A set of tender documents containing detailed specifications including terms and conditions for the purchase of PLC Model: CPU-313-C and 3 Phase 3 H.P. Drive Micro Master is attached herewith as Annexure-I & II.






ANNEXURE-I

TECHNICAL SPECIFICATIONS OFPLC Model: CPU-313-C

- 64 KB RAM- 24 DIO / 16 DO- 4 AL Input- 2 Output- 1 PT 100- Input Supply 24 Volts.

ANNEXURE-II

TECHNICAL SPECIFICATIONS OF3 Phase 3 H.P. Drive Micro Master

- Input 3 Phase 440 Volts- With Basic Operating Panel- 3 Phase 3 H.P. / 2.2 KW.

TERMS & CONDITIONS: 01. The Techno-Commercial tender / quotation should be submitted in triplicate.02. The rates quoted should be F.O.R. destination.03. The tender / quotation should remain valid for 90 days from the date of opening of the tender.04. The tender / quotation should be made in lumpsum price separately for any/each item.05. In case available on DGS&D rate contract, please attach valid Registration Certificate.06. 90% Payment shall be made against delivery at CIHT and remaining in one month after


07. (a) The tender / quotation must accompany demand draft/pay order amounting Rs.2,000/- (Rupees Two Thousand only) in the name of the Principal Director, Central Institute of Hand Tools payable at Jalandhar towards lumpsum amount of Earnest Money (Refundable). The Earnest Money must be attached with the Techno Commercial Bid. The same will be forfeited, if the execution of the order is not made in time. The offers without Earnest Money Deposit will be considered as unresponsive and will be rejected. (b) Parties registered with DGS&D or NSIC under Government Store purchase programme are exempted from the payment of Earnest Money. A photocopy of the Registration Certificate must be attached with the Techno Commercial Bid.


09. The tender/quotation should be duly sealed and addressed to The Principal Director, Central Institute of Hand Tools, G.T. Road, Bye Pass, Opp. Shaheed Bhagat Singh Colony, Jalandhar City as “TENDER/QUOTATION FOR THE SUPPLY OF PLC Model: CPU-313-C & 3 Phase 3 H.P. Drive Micro Master” and should reach this office latest by 10 th September, 2009 before 11.00 a.m. The Techno Commercial bids shall be opened on the same date at 2.00 p.m. in the presence of the tenderers or their authorised representatives.


11. Non fulfilling of any of the conditions, the tenders / quotations are liable to be rejected.12. The decision of the Purchase Committee shall be final and binding on all the parties.

Contd…2…

(2)

13. Conditional, late, incomplete and telegraphic tenders or tenders without earnest money shall not be accepted.

14. The tender documents can also be downloaded from our Website: www.ciht.in and the party will have to pay Rs.500/- by means of demand draft at the time of submission of tender.





http://www.ciht.in/


Messers _________________________________________________________________________________________________________


Dear Sir,


01. Digital & Analog Software for CKT Design alongwith Design Kit – 01 No.

A set of tender documents containing detailed specifications including terms and conditions for the purchase of Digital & Analog Software for CKT Design alongwith Design Kit is attached herewith as Annexure-I.






ANNEXURE-I

TECHNICAL SPECIFICATIONS OFDIGITAL & ANALOG SOFTWARE FOR CKT DESIGN ALONGWITH DESIGN KIT:

Digital and Analog Circuit DesignModel CM 2000Circuit maker software with PCBDesigning, Simulation for Analog & Digigal circuit with design entry.(University package, Educational)“Multi-Loadable Single License Software.



07. (a) The tender / quotation must accompany demand draft/pay order amounting Rs.3,000/- (Rupees Three Thousand only) in the name of the Principal Director, Central Institute of Hand Tools payable at Jalandhar towards lumpsum amount of Earnest Money (Refundable). The Earnest Money must be attached with the Techno Commercial Bid. The same will be forfeited, if the execution of the order is not made in time. The offers without Earnest Money Deposit will be considered as unresponsive and will be rejected. (b) Parties registered with DGS&D or NSIC under Government Store purchase programme are exempted from the payment of Earnest Money. A photocopy of the Registration Certificate must be attached with the Techno Commercial Bid.


09. The tender/quotation should be duly sealed and addressed to The Principal Director, Central Institute of Hand Tools, G.T. Road, Bye Pass, Opp. Shaheed Bhagat Singh Colony, Jalandhar City as “TENDER/QUOTATION FOR THE SUPPLY OF DIGITAL & ANALOG SOFTWARE FOR CKT DESIGN ALONGWITH DESIGN KIT” and should reach this office latest by 10 th September, 2009 before 11.00 a.m. The Techno Commercial bids shall be opened on the same date at 2.00 p.m. in the presence of tenderers or authorised representatives.





(i) Price quoted is on F.O.R. Destination basis or Ex-Works basis(ii) Excise Duty(iii) Custom Duty(iv) Central Sales Tax / V.A.T.(v) Packing & Forwarding Charges

Contd..2…

http://www.ciht.in/

(2)

(vi) Freight Charges(vii) Transit Insurance(viii) Installation & Commissioning Charges(ix) Place of Inspection(x) Delivery Period(xi) Guarantee / Warrantee / Support(xii) Validity of Offer(xiii) Whether Earnest Money Deposited or Registered with DGS&D / NSIC(xiv) Training to our Personnel(xv) Payment terms





Messers _________________________________________________________________________________________________________


Dear Sir,


01. 8051 Compiler Software for 5 User Licences – 01 No. Annexure-I02. USB Data Acquisition – 01 No. Annexure-II03. Biometric Application System – 01 No. Annexure-

III04. PC Based Digital Experimental Board – 01 No. Annexure-IV05. Digital Breadboard IC Trainer – 01 No. Annexure-V

A set of tender documents containing detailed specifications including terms and conditions for the purchase of 8051 Compiler Software for 5 User Licences, USB Data Acquision, Biometric Application System, PC Based Digital Experimental Board and Digital Breadboard IC Trainer is attached herewith as Annexure-I, II, III, IV & V.






ANNEXURE-I

TECHNICAL SPECIFICATIONS OF8051 Compiler Software for 5 user licences:

Ansi c compiler supporting over 800 different microcontrollerList of Experiments for 8051 compiler software:1. ANSI C – full featured and portable 2. Library Source- for standerd libraries and sample code for i/o drivers3. Complete-includes macro assembler, preprocessor and one-step driver

ANNEXURE-II

TECHNICAL SPECIFICATIONS OF USB Data Acquisition:

PC Interface thru bus with data acquisition systemHaving 8 channel 12-Bit Analog Inputs,2 analog outputs20 Digital Input output lines with 2 no of relay.Complete Software Control Must Support LAbview Software,Along with Drivers with experimental user manual with exampleCodes for the above mentioned sensor. On board 8 digital output(LED’s) & with on board 8 digital input (8 pin dip switch)On board buzzer for indicationFacility for External signal interface, with Potentiometer,PGA with Gains of 1,2,4,5,8,10,16,or 20 v/vUp to 8 kSamples/Sec (Burst) or 1.2 kSamples/Seconds (Stream)Supports Software or Hardware Timed Acquisition2 Analog Output, 20 Digital I/O (Up to 50 Hz per I/O)32-Bit Counter , with Watchdog Timer FunctionUSB 2.0/1.1 Low Speed Interface

ANNEXURE-III

TECHNICAL SPECIFICATIONS OFBiometric Application System:

The System should have a biometric Finger recognition module with a processor basid system, 5v DC + 200m V Supply Voltage, Communication speed 9600 to 115200 bps, Capture speed 1.2 sec (Capture + Extract + Match)Boot up time 0.34 Sec. Facility of 100 Fingers Data base can be stored Special Function:Fast Identification Cancel, Adaptive Capture for Dry, Wet, Small Finger based on MCS51 processor at 11.0592 MHz clock, 64k Flash memory, 32 Digital I/O with real time clockE2PROM 4K (support I²C bus) sample programs and experimentalManual must be provider serial port On board stepper motor interface, On board LCD display,On board (LM35) temp sensor with ADC 804 provisionOn board relay & buzzer interface for switching devices.

Contd….2…

(2)

ANNEXURE-IV

TECHNICAL SPECIFICATIONS OFPC Based Digital experimental board :

The system should be based around FGPAs with a graphical LCD display.28 pin TTL in and TTL out emulationsFunctional control keypadsOn board signal generator from 1hz to 1 Mhz with 100 ms pulseSolderless IC devices for experimentation8 LED output display8 x 8 dotmatrix LEDsOn board buzzerOnboard 8 bit ADc/DAC boardUSB interface with softwareOn board 555, monostable/non stable multivibrator etc.Software facility for editing and reversing experimental circuitsFacility for pin measurement points for various test point measurementVH, L, common point x4Various list of digital experiments must be performed

ANNEXURE-V

TECHNICAL SPECIFICATIONS OFDigital Breadboard IC Trainer:

Componenet Development SystemOn Board Function Generator: 1Hz to 200 KHzVariable Power Supply :+ 5V , + 12vOn Board potentiometer Logical Input, Output Switches with indicator : 8Seven Segment : 1, Load Speaker :1Pulsar circuitInput : 8 Logic , SwitchesOutput : 8 LED’s to observe logic output StatusTwo Breadbords to conduct experiments Power Requirements: 230 V/50 Hz



Contd…3…

(3)

07. (a) The tender / quotation must accompany demand draft/pay order amounting Rs.2,500/- (Rupees Two Thousand & Five Hundred only) in the name of the Principal Director, Central Institute of Hand Tools payable at Jalandhar towards lumpsum amount of Earnest Money (Refundable). The Earnest Money must be attached with the Techno Commercial Bid. The same will be forfeited, if the execution of the order is not made in time. The offers without Earnest Money Deposit will be considered as unresponsive and will be rejected. (b) Parties registered with DGS&D or NSIC under Government Store purchase programme are exempted from the payment of Earnest Money. A photocopy of the Registration Certificate must be attached with the Techno Commercial Bid.


09. The tender/quotation should be duly sealed and addressed to The Principal Director, Central Institute of Hand Tools, G.T. Road, Bye Pass, Opp. Shaheed Bhagat Singh Colony, Jalandhar City as “Tender/Quotation for the supply of 8051 Compiler Software for 5 User Licences, USB Data Acquision, Biometric Application System, PC Based Digital Experimental Board and Digital Breadboard IC Trainer” and should reach this office latest by 10 th September, 2009 before 11.00 a.m. The Techno Commercial bids shall be opened on the same date at 2.00 p.m. in the presence of the tenderers or their authorised representatives.









http://www.ciht.in/

No. CIHT:JAL:P:499(Vol.iv): Dated: / / 2009

(In reply, please quote this number)

Messers _________________________________________________________________________________________________________


Dear Sir,


01. Proteus Compatible Simulation Software & Hardware.02. Zig Bee Wireless Application System.

A set of tender documents containing detailed specifications including terms and conditions for the purchase of Proteus compatible Simulation Software & Hardware and Zig Bee Wireless Application System is attached herewith as Annexure-I & II.






ANNEXURE-I

TECHNICAL SPECIFICATIONS OFPROTEUS COMPATIBLE SIMULATION SOFTWARE & HARDWARE:

(i) It should support for 8051, PIC, AVR (Proteus VSM Software 5 User License)(ii) It should support Proteus Compatible Hardware comprise of 8051, PIC, AVR set of

5 modules.(iii) It should be supplied with Manual and Training to our personnel for 3 days.

ANNEXURE-II

TECHNICAL SPECIFICATIONS OFZig Bee Wireless Application System:

The system should be IEEE 802.15.14 with ISM2 with one master coordinator and 4 End devices (Zig Bee configured as per bellow specifications).With indoor and outdoor range 100-300.(a) Zig Bee Coordinator:

The coordinator (based on 8051)With max. stream Zig Bee modelZig Bee based ISM-2.4 GHz with integrated chip antennaSupporting various Network Topology with RF data rate 250 KBPSWith software selectable data rate, with input/output range 100 Ft / 300 Ft.With power supply 2.8 V8 Channel A/D8 Digital input/output2-PWM output89C51RD2 uC with ISP features4K E2PROM on chip RTCRTC with battery back-upTwo 12V relays with isolated O/PsDevelopment 16 x 2 LCD display & seven segment display8 I/Ps from DIP switches8 O/Ps Available on LED’s

(b) Zig Bee End Devices:Zig Bee End devices based on SI8051F005Zig Bee based ISM-2.4 GHz with integrated chip antennaSupporting various Network Topology with RF data rate 250 KBPSWith software selectable data rate with input / output range 100 Ft/ 300 Ft.With power supply 2.8 V8 Channel A/D8 Digital input / output2-PWM outputWith Zig Bee modules configured for End Devices SlavesWith 4 Dip switches, 1 relay and buzzer output, battery operated2 complete port for output connections, 16 character LCD displays etc.

Contd…2…

(2)



07. (a) The tender / quotation must accompany demand draft/pay order amounting Rs.3,500/- (Rupees Three Thousand & Five Hundred only) in the name of the Principal Director, Central Institute of Hand Tools payable at Jalandhar towards lumpsum amount of Earnest Money (Refundable). The Earnest Money must be attached with the Techno Commercial Bid. The same will be forfeited, if the execution of the order is not made in time. The offers without Earnest Money Deposit will be considered as unresponsive and will be rejected. (b) Parties registered with DGS&D or NSIC under Government Store purchase programme are exempted from the payment of Earnest Money. A photocopy of the Registration Certificate must be attached with the Techno Commercial Bid.


09. The tender/quotation should be duly sealed and addressed to The Principal Director, Central Institute of Hand Tools, G.T. Road, Bye Pass, Opp. Shaheed Bhagat Singh Colony, Jalandhar City as “TENDER/QUOTATION FOR THE SUPPLY OF PROTEUS COMPATIBLE SIMULATION SOFTWARE & HARDWARE AND ZIG BEE WIRELESS APPLICATION SYSTEM” and should reach this office latest by 10 th September, 2009 before 11.00 a.m. The Techno Commercial bids shall be opened on the same date at 2.00 p.m. in the presence of the tenderers or their authorised representatives.









http://www.ciht.in/

No. CIHT:JAL:P:499(Vol.iv): Dated: / / 2009

(In reply, please quote this number)

Messers _________________________________________________________________________________________________________


Dear Sir,


01. WI-FI Application Kit.02. Embedded 8051 TCP/IP Application Board.03. GPS Development System.

A set of tender documents containing detailed specifications including terms and conditions for the purchase of WI-FI Application Kit, Embedded 8051 TCP/IP Application Board and GPS Development System is attached herewith as Annexure-I, II & III.






ANNEXURE-I

TECHNICAL SPECIFICATIONS OFWI-FI (IEEE 802.11b) Application Kit :

PCMCIA Wireless LAN card (IEEE 802.11b)16 bit socket for infrastructure and adhoc.Facility for RS 232, 422, 8452 Ethernet conversion

Configuration monitoring tools through EthernetConfiguration tools through serialAT command set-protocol support RFC2217, telnet com port control protocolWi-Fi development board with access pointCompact Flash Wi-Fi card, libraries, etc.RS-232 to Wi-Fi conversion, Wi-Fi scannerBased on MCS51 Processor at 11.0592 mhz clock64k Flash memory, 32 Digital i/oWith real-time clock, E2PROM 4k (support 12c bus)Sample programs and experimental manual serial port.

ANNEXURE-II

TECHNICAL SPECIFICATIONS OFEmbedded 8051 TCP/IP Application Board :

89C51RD2 MCU with on chip 64 kbytes ISP flash Program memory512 K of EEPROM with RTC, etc.Network module supporting TCP/IP16 x 2 LCD interface to MCU2 relays interface for remote control128 x 64 Graphical LCD DisplayLED & switch interfaces40 pin FRC connector with address, data and control signals

ANNEXURE-III

TECHNICAL SPECIFICATIONS OFGPS Development System :

Falcom JP13, 20 Channels GPS Receiver based on SiRF GSC3 chipARM 7 based band CPU with 8Mbits Flash memory200.000+ effective correlators and integrated TCXOProtocol support for NMEA & SiFRPosition accuracy<10m (without DGPS)Extremely fast TIFF at low signal levelsGSW3 software support and SiRFLoc multi-mode GPS supportPosition accuracy<10m, (without DGPS)P89C51RD2/P89C668 microcontroller prototyping module64 KB on-chip FLASH 512 KB external serial 12C-EEPROM

Contd…2…

(2)



07. (a) The tender / quotation must accompany demand draft/pay order amounting Rs.2,000/- (Rupees Two Thousand only) in the name of the Principal Director, Central Institute of Hand Tools payable at Jalandhar towards lumpsum amount of Earnest Money (Refundable). The Earnest Money must be attached with the Techno Commercial Bid. The same will be forfeited, if the execution of the order is not made in time. The offers without Earnest Money Deposit will be considered as unresponsive and will be rejected. (b) Parties registered with DGS&D or NSIC under Government Store purchase programme are exempted from the payment of Earnest Money. A photocopy of the Registration Certificate must be attached with the Techno Commercial Bid.


09. The tender/quotation should be duly sealed and addressed to The Principal Director, Central Institute of Hand Tools, G.T. Road, Bye Pass, Opp. Shaheed Bhagat Singh Colony, Jalandhar City as “TENDER/QUOTATION FOR THE SUPPLY OF WI-FI APPLICATION KIT, EMBEDDED 8051 TCP/IP APPLICATION BOARD & GPS DEVELOPMENT SYSTEM” and should reach this office latest by 10 th September, 2009 before 11.00 a.m. The Techno Commercial bids shall be opened on the same date at 2.00 p.m. in the presence of the tenderers or their authorised representatives.









http://www.ciht.in/

establishment - central institute of hand tools, · web viewproximity sensor that detects the...

Documents