essentials of landslide

Essentials of Landslidewww.spirentcampus.com

1

Copyright 2011 Spirent Communications

All Rights Reserved.International copyright laws prohibit the copying, reproducing or transmitting of part or all of this document in any form or by any means, electronic or mechanical, including photocopying, facsimile or recording, for any purpose without the express written permission of Spirent Communications.Information in this document is subject to change without notice and does not represent a commitment on the part of Spirent Communications.Spirent Communications makes no warranties with respect to the contents or the use of this documentation and specifically disclaims any expressed or implied warranties of merchantability or fitness for a particular purpose. Further, Spirent Communications reserves the right to revise this publication and to make changes to its contents, at any time, without obligation to notify any person or entity of such revisions or changes. Spirent Communications also assumes no responsibility for any errors that may appear in this document.

2

Table of Contents

Hardware Architecture Capabilities ..................................4

Test Applications .......................................................32

Test Activities ...........................................................52

Test Options .............................................................61

Browser Introduction ...................................................71

Test Administration Server Manager .................................84

System Administration ................................................101

Client Work Environment .............................................122

Test Results .............................................................147

3

Landslide Hardware and Architecturewww.spirentcampus.com

4

Landslide Topics

Landslide Resources

Landslide Platform

Landslide Hardware & Architecture2

5

Spirent Landslide Getting Started

Spirent Customer Service Center Onlinehttp://support.spirentcom.com

Download Software Updates

Review Product Documentation


6

Spirent Landslide Download Software Updates


7

Spirent Landslide Download

Latest releases are listed firstOperating System: Linux


8

Spirent Landslide Download Software

Download Landslide install package (.upg)


9

Spirent Landslide Download Release Notes

Current release information


10

Spirent Landslide User Guide

Standalone Help File compiled for use outside Landslide


11

Spirent Landslide Installation and Automation

All available Landslide documentation, including FAQs


12

Landslide Topics

Landslide Resources

Landslide Platform


13

Landslide 7100B2U, 19 inch rack-mountable

5.40H x 17.44W x 26.80D

35 lb. (16 kg)

115-230 V, 50/60 Hz, 870W

10/100/1000 Base-T Administrative Server Interface

Landslide Hardware Platform

Management Network

LAN Interface (Eth 0)

FRONT VIEW

REAR VIEW

MonitorMouse

Keyboard


14

Client Hardware RequirementsMinimum 400 MHz processor; 3.0 GHz recommended

Minimum 512 MB RAM; 1 GB RAM recommended

Minimum 50 MB available disk space; 100 MB available disk space recommended

Video adapter with at least 16MB RAM, supporting a screen resolution of at least 1024 x 768 or higher

Landslide Hardware Platform / Client Hardware

Management Network

LAN Management Interface 10/100/1000 Base-T

(Eth 0)

FRONT VIEW

REAR VIEW


15

Ethernet test interfaces available:4-Port 10/100/1000 Base-T

4-Port 1000 Base-SX (GigE) Multi-Mode fiber

1-Port 10GigE

Optional IPSec AcceleratorQuad Cavium 1620 card (L-ACC-004).

Landslide Hardware Platform / Interfaces

Test Network

Test Interfaces

FRONT VIEW

REAR VIEW


16

Typical Landslide Deployment


17

Typical Landslide Deployment


18

Landslide Manager

TAS (Test Administration Server)User Accounts

System Configuration

Site Configuration

Test Libraries

Test Results


19

Landslide Manager

Test Administration ServerUser Accounts


Site Configuration

Test Libraries

Test Results

Test ServerTest Logic

Node Emulators

Protocol Stacks

Data Types


20

TAS

Landslide GUI Work Environment18

Test Control

TEST SESSION

21

TAS


ControlMessages

BearerTraffic

Test Control

22

TAS

Test Control


ControlMessages

BearerTraffic

BearerTraffic

ResponseMessages

TEST SESSION

23

Test Control


TAS

ControlMessages

BearerTraffic

BearerTraffic

ResponseMessages

Test Measurements

TEST SESSION

24

Up to 12.8 Million Mobile

Stations

Landslide: Network in a Box

Internet


25

32,000 Base Stations/RNC/SGSNs


Internet


26

12.8 million sessions

32,000 sessions/sec64 Gb/s bidirectional

data


Internet

Device(s)Under Test


27

NetworkHosts


Internet

Up to 5 NHs

ApplicationServers

IPv4

IPv6

1000 Nodesper NH


28

NetworkHosts


Internet

Up to 5 NHs

ApplicationServers

IPv4

IPv6

1000 Nodesper NH



data



StationsDevice(s)

Under Test


29

NetworkHosts


Internet

Up to 5 NHs

ApplicationServers

IPv4

IPv6

1000 Nodesper NH



data



StationsDevice(s)

Under Test


GGSN 400,000 per TSUMTS 150,000 per TSIP App Node 400,000 per TSWiMAX 100,000 per TS CDMA 200,000 per TSAAA 400,000 per TS

These numbers can allbe doubled with Performance Accelerator

And extended even more with the Extreme license

30

Thank You

www.spirentcampus.com

31

Landslide Test Applicationswww.spirentcampus.com

32

Landslide Test Packages

3GPP FemtocellAAA RADIUS and AAA DiameterCDMA2000CDMA FemtocellCGF EmulationDCCAeHRPDGPRSIP DataL2TP VPN Gateway

Mobile IPLTEPCRFUbiCellUMTSWiMAX Forum

Landslide Test Applications2

33

3GPP Femtocell

ProtocolsIuh Interface: GMM, SM, RANAP, HNBAP, SCCP

Pi Reference Point: L3-4

EmulatorsMobile Node (MN)

SGSN

Network Host (NH)

Security Gateway


34

AAA RADIUS and AAA Diameter

ProtocolsDiameter Base and the Network Access Server Application

IPSec (optional with Diameter)

RADIUS


Network Access Server (NAS)

AAA Server


35

CDMA2000

ProtocolsOpen RP

MIP

PPP

L2TP

EmulatorsHome Agent (HA)

Mobile Node (MN)

Network Host (NH)

Packet Control Function (PCF)

Packet Data Servicing Node (PDSN) with a Foreign Agent (FA)

Secure Gateway (SG)


36

CDMA Femtocell

ProtocolsRP Femtocell and FGW, PPP/Open RP, RP IPSec

L3-7 Data Traffic, IPSec

EmulatorsUser Equipment (UE)

Femtocell

Network Host (NH)

Security Gateway


37

CGF (Charging Gateway Function) Emulation

ProtocolsGTP (versions 0 2 supported)

Charging Data Records (CDR) Handling

EmulatorsCGF


38

DCCA (Diameter Credit Control Application)

ProtocolsDiameter Base and the Credit Control Application

IPSec (optional)


DCCA Client

DCCA Server


39

eHRPD


ePCF node

PDN GW Emulation

Network Host (NH)

Security Gateway

ProtocolsA10/A11: ePCF and HSGW, PPP/Open RP

S2a: HSGW and PDN GW, PMIPv6



40

GPRS (General Packet Radio Service)

ProtocolsPPP

Gn GTP, PPPoGTP, IPv4, DHCP

Gi IPv4, IPv6, L2TP, RFC 2547bis, RIPv1, RIPv2, BGPv4


SGSN (Serving GPRSSupport Node)

Network Host (NH)

Security Gateway


41

IP Data

ProtocolsIPv4, IPv6

Basic and Advanced data protocols

DHCP (optional)

RADIUS (optional)

Data IPSec


Network Host (NH)

NAS (optional)


42

L2TP VPN Gateway

ProtocolsL2TP

PPP

IPSec


L2TP Access Concentrator (LAC)

Network Host


43

Mobile IP

ProtocolsICMPv4 or ICMPv6

IPv4 or IPv6 with Mobile IP Extensions

IPSec


IPv4 Foreign Agent (FA) Home Agent (HA) Network Host (NH)

IPv6 Correspondent Node (CN) Home Agent (HA)


44

LTEProtocols

S1-MME NAS, S1-AP, SCTP, S6a, S6d


SGi, S11, S1-U


ENodeB (E-UTRAN NodeB) (E-UTRAN Evolved Universal Terrestrial Radio Access Network)

Serving Gateway (SGW)

PDN Gateway (PDN GW)

Network Host (NH)

Security Gateway


45

PCRF (Policy and Charging Rules Function)

ProtocolsDiameter

RADIUS

SIP


Application Function (AF)

Access Gateway (AGW)


46

UbiCell

The CDMA Ubicell is a base station, providing CDMA call coverage for areas that high capacity CDMA MACRO BTS cannot handle such as dead spots in homes and indoor environments as well as areas where radio waves are weak


47

UMTSProtocols

Iu-PS GMM, SM, RANAP, SCCP ATM: MTP3-B, SSCF-NNI, SSCOP, AAL5 Ethernet: MT3UA, SCTP, IPv4, IPv6

Gb (optional) IPv4, IPv6, UDP, NS, BSSGP, LLC, GMM, SM, SMSGn GTP, UDP, IPv4, IPv6Ga GTP'Gi IPv4, IPv6

EmulatorsMNControl NodeUser NodeGGSN (optional)Network Host (optional)


48

WiMAX (Worldwide Interoperability for Microwave Access)

ProtocolsIPv4

MIP (RFC 3344)

Client MIP (same as MIP)

Proxy MIP

DHCP (RFC 2131)

IPSec

EAP and Double EAP (SIM, AKA, MD5, TLS, GTC, MSCHAPv2, TTLS)


49

WiMAX Emulators

EmulatorsMobile Subscriber Station (MSS)Base Station (BS)Access Service Network Gateway AAA ClientNASForeign Agent (FA)Connectivity Service Network (CSN)AAA ServerHome Agent (HA)Network Host (NH)


50

Thank You


51

Landslide Test Activitieswww.spirentcampus.com

52

Landslide Test Activities

Capacity Test

Handoff Test

MIP Revocation

QoS Update Test

Session Loading

Session Loading with Mobility

Landslide Test Activities & Options2

53

Capacity Test

Simultaneous sessions

Available in all test cases

Establish sessions at a specified rate

When maximum capacity is reached, subsequent sessions will begin to fail

Test system continues to establish sessions until:

The number of sessions you selected has been reached

The test is stopped


54

Handoff Test

Test the SUTs ability toprocess handoffs from onedevice to another

Inter-technology handoffOccurs when MN moves out of coverage of one technology and moves into the coverage area of another technology


55

MIP Revocation

Test the SUT's ability to request or respond to revocations

By running the test at various capacity levels and handoff rates, you can determine the maximum revocation rate that an SUT can support under a particular processing load


56

QoS Update Test

Test an SUTs ability to process Update PDP Context requests thatcontain QoS Profile changes

Available when GTP Version 1 is used:GGSN Nodal

UMTS


57

Session Loading

Test the SUT's ability to process a mix of activities for a long period of time, emulating real-world activity as it would in a commercial network.

Session activationsSession deactivationsData transactions of various typesHandovers

Session Loading Test

0

200

400

600

800

1000

1 3 5 7 9 11 13 15 17 19 21 23

Time

T

o

t

a

l

S

e

s

s

i

o

n

s

Series1


58

Session Loading with Mobility

Test the SUTs ability to process a mix of activities for a long period of time

Emulate a commercial network

MobilityDetermines a DUTs ability to process handoffsbetween itself and other nodes

Supports both intra and inter-DUT handover

By running a handoff test at various capacity levels and various handoff rates:

User can determine the maximum handoffrate supported under various test scenarios


59

Thank You


60

Landslide Test Optionswww.spirentcampus.com

61

Landslide Test Options Topic Overview

Data Traffic

DHCP

EAP

IPSec

SUT Query

Landslide Test Options2

62

Data Traffic

Test SUT bearerplane capabilities

Verify packetdata connectivity

Data Message Flow (DMF)

Contains the data model definition, including the protocol, the rate used for data traffic, and the messages exchanged between the MN and the Network Host


63

Data Test Types

Verification

Continuous

Power User

External


64

Data Traffic Advanced Data Protocols

FTP (Active & Passive)

HTTP 1.1

ICMP

IMAP

IMAP Fetch

MMS

POP3

RTP (TCP & UDP)

RTSP (TCP & UDP)

SIP

SMTP

TFTP

WAP (WSP & WTP)

WV


65

DHCP (Dynamic Host Configuration Protocol)

Allows a client to obtain an IP address and configuration information about the network that it has joined

IPv4

IPv6

By using this information to configure its own parameters, a client can join a network and move between networks without advance knowledge of the configuration required by the network

DHCP client support is available in:GGSN Nodal Test Case

IP Application Test Case


66

EAP (Extensible Authentication Protocol)

Used to authenticate the MN with a AAA Server

EAP Carried on RADIUS or Diameter messages.

Landslide Authentication MethodsMD5

EAP-SIM

EAP-AKA

EAP-MSCHAPv2

EAP-TLS

EAP-GTC


67

IPSec (Internet Protocol Security)

Used to protect traffic between two peersAuthenticating the sender, ensuring packet integrity, encrypting packets

Two peers negotiate one or more Security Agreements (SA) comprised of keys that allow the peers to tunnel traffic over IPv4 or IPv6

IPSec can be configured for:IPv6 HA Nodal

LNS Nodal and LNS Node

FA Nodal and HA Nodal

Data IPSec: Available in all data-capable test cases

AAA Server Nodal and AAA Node

DCCA Server Nodal and DCCA Node

PDG Micro-Mobility


68

SUT Query

Enabled within some nodal test cases

Used as a standalone test case in any test session

Collect information from an SUT while the test is runningSample the SUT's CPU utilization

Automatically send a query command via a telnet interface

Define dynamic rate adjustments to be triggered when CPU usage is above or below a specified target


69

Thank You


70

Landslide Browser Introductionwww.spirentcampus.com

71

Landslide GUI Access through Web Browser

Landslide web pages are best viewed with:Internet Explorer 7.0+

Firefox 3.0+

Netscape 7.1+.

JavaScript must be enabled

Popup blockers should be disabled

Cookies should be allowed

Java 6 (1.6.0) or later is required for TAS Manager and Landslide Client

Landslide Browser Introduction2

72

Landslide GUI


73

Landslide GUI Links / Test Results

Test ResultsOpens a directory of results by user


74

Landslide GUI Links / User Guide

User GuideOpens in webbrowser

Also available as a standalone help file from Spirent CSC Onlinehttp://support.spirentcom.com


75

Landslide GUI Links / Troubleshoot Java

Help for commonProblems

Java Plug-in Download links

Reminder: Java 6 (1.6.0) or later is required for TAS Manager and Landslide Client


76

Landslide GUI Links / Support/Downloads

Direct link to the SPIRENT Customer Service Center (CSC) online

Must be connected to the internet


77

Landslide GUI Tools / TAS Manager Application

Test Administration Server (TAS) isthe Landslide Manager

System maintenance tasks

The TAS Manager runs in a separate application from the Landslide Client

cfguser password is required for login to the TAS

Note: TAS Manager is covered in a separate course module


78

Landslide GUI Tools / +Tcl API

Linux Tcl Base Install

Windows Tcl Base Install

Landslide Tcl API Package

Install/Upgrade Instructions


79

Landslide GUI Tools / LandslideGlobal.xls

Global hidden workbookMacros for generating custom reports

TAS generated Excel reports include functions that assist with report analysis and setting up customized reports

Features developed with Microsoft Excel 2003, Visual Basic 6.5

Available to be used in custom functionsCustom report macrosThis example file contains the Visual Basic modules and forms that can be modified


80

Landslide GUI RESULTS MANAGER

A tool for analyzing and presenting test dataAllows you to read end of test results generated on TASSet up templates and rules for graphs and tables

Automatically load these templates when you open test resultsEasily analyze future runs of the same test

Save graph imagesExport as html report


81

Landslide GUI LANDSLIDE CLIENT

Opens the Landslide ApplicationDefault Administrator login

User Name: sms Password: a1b2c3d4


82

Thank You


83

Landslide TAS Manager(Test Administration Server)


84

Landslide TAS Manager Topic Overview

TAS Manager

Login / Logout

Run

System

Change cfguser password

Landslide TAS Manager2

85

Landslide Manager Overview

Test Administration ServerUser Accounts


Site Configuration

Test Libraries

Test Results

Client Platform

Test Definition

Test Reports

System Management

System Status

System Config

Site Config

Test Results

User Accounts

Landslide Manager Test Administration

Server

Test Libraries


86

Access TAS Manager


87

TAS Manager

LoginTAS Manager Version

Connection Status

TAS Status

Running Stopped

Hard Drive Status


88

Run Menu

Start: Start the TAS user interface and test control processes after a Stop or a Terminate

Stop: Terminate the TAS user interface and test control processes in an orderly fashion

Disconnect all client sessions with the TAS and all communication with the test servers. A message is broadcast to any other users on the system that the TAS is immediately shutting down.

Restart: This will cycle the TAS through a stop and a start. A message is broadcast to any other users that the TAS is shutting down.


89

More Run Menu Options

TerminateThis will immediately terminate the TAS user interface and test control processes

No warning to system users, regardless of test activity

RebootImmediately reboot the TAS platform

No warning to system users, regardless of test activity

RefreshRefresh the console to display the current TAS status


90

System Menu / Backup and Restore

BackupAvailable when TAS is STOPPED

Save copy on TAS Save to local file

RestoreIf it becomes necessary to repair the TAS database


91


System Menu / Upgrade Steps

Step 1: Stop TAS

Step 2: Backup

Step 3: Upgrade TAS file

Step 4: Restart

Step 5: Install License

Step 6: Start TAS

92

System Menu / Install License

Customer Service will provide a license file *.sql

Save it to your PC and browse to it when prompted

TAS must be in Stopped State toinstall License


93

System Menu / Show License Info

Each license is uniquely keyed to a particular test system through the TAS ID

You must have the TAS ID for anySpirent support assistance andlicensing

You can obtain the TAS ID for your system and view a summary of the current license using the Systemmenu


94

System Menu / Cleanup Files

The TAS Manager recommends cleaning up files older than twelve months

If files older than one year exists on the TAS, when you login to the TAS Manager, a message displays recommending cleanup: Files older than 1 year found, System. File Cleanup Recommended

Download files fromthe TAS

Cleanup files on theTAS


95

System Menu / Get Debug Logs

Technical support may instruct you on how to capture debug logs

To save the debug logs:Select the name and location for the log file.

Click OK to save the file


96

System Menu / Show Admin Log

Admin log is shown in the TAS Manager Console

Contains information on:Backups

Upgrades

Licenses


97

System Menu / NTP Status and Resync

View current synchronization status

NTP status indicators used on LandslideIn-sync

In-sync-locally

Not-in-sync

N/A

Manually synchronize the TAS with its assigned NTP Server

NTP Server is assigned using the Test Server Configuration window (covered in later training topic)


98

System Menu / Change Passwords

cfguser is the default TASManager Administrationaccount

Default password: cfguser

Use the TAS Manager Console to change the password for the TAS cfguser account at any time

Note: Passwords for user accounts are changed using the main menu or the User Account Administration window, covered in a later training topic.


99

Thank You


100

Landslide System Administration


101

Landslide System Administration Topic Overview

Landslide Client

User Account Administration

System Under Test Administration

Test Server Administration

Test Suite Importer / Exporter

Test Data Files

Custom Libraries

Client Settings

System Shutdown

Landslide System Administration2

102

Landslide Client / Login

Browse to Landslide Client IP Address

Click LAUNCH under Landslide Client

Default Username sms

Default Passworda1b2c3d4


103

System Administration

LandslideAdministration

ADMIN MenuAll Global parameters

System User Test Configuration


104

User Account Administration

User Account AdministrationAdd

Modify

Delete

REFRESH: Restoresthe form to its original or defaultvalues

Clicking REFRESH before MODIFY orADD will cause all changes to be lost


105

User Account Permissions

Test Operator Privilege Level may only: Configure and Execute Tests

Manage their own individual libraries

View logs and reports

Test Administrator Privileges:Define SUTs

Full control over user Libraries

System Administrator Privileges:Full control over Landslide system configuration

May assign lower level user accounts


106

Test Administrator User Account Privileges

Primary Administrator Account: SMS

Only SMS may:Assign System Administrators

Manage Test Libraries

Perform System Shutdown


107

SUT (System Under Test)


108

SUT Administration


109

Test Server Administration

Test servers perform the tests

The number of test servers that the TAS will recognize is governed by your test system's licensed capacity

Add:Name

Management IP Address


110

Test Server Administration Window

Available TestServers

Management IPAddress

AcceleratorData

Performance

Information Tabs

Test ServerManagement


111

Test Server Administration Upgrade

After upgrading the TAS, its necessary to upgrade test servers


112

Configure Test Servers

Select a test serverfrom the configuredlist

Login with cfgusercredentials

Rememberpassword: Optional


113

Admin: Test Suite Exporter

Export Landslide Test Suite files for backup or sharing:

Test Sessions

Test Cases

DMFs: Data Message Flows

TDFs: Test Data Files

Message Editors

VSAs: RADIUS specific attributes

AVPs: Diameter specific attributes


114

Test Suite Exporter

Enter the file name

Add files from any library

Add test files to the export list using the right arrow


115

Test Suite Importer

Installed: Lists all files installed on the Landslide System

Browse: Find previously exported test suites

Select the target library and import


116

Test Data Files

Test Data Files can be used to provision test case parameters with multiple, non-sequential values or to provision the Filler Data for a DMF message.

Like other library elements, Test Data Files can also be imported or exported as part of a Test Suite


117

Custom Libraries

Define up to 50 new libraries

All test elements can be saved to custom libraries

a custom library can be exported to a Test Suite

Users with write access can import Test Suites into a custom library


118

Client Administration

Define global Landslide application settings


119

System Shutdown

This method of stopping the TAS is used when you want to warn other users on the system that a shut down is pending and give them time to save their work and log out gracefully. You must be logged in to the test system as the Super User to initiate a shut down


120

Thank You


121

Landslide Client Work Environmentwww.spirentcampus.com

122

Landslide Work Area: Navigation Bar

Navigation Bar

Landslide Client Work Environment2

123

Landslide Work Area: Main Menu

Navigation Bar

Main Menu


124

Landslide Work Area: Title Bar

Navigation Bar

Main Menu

Release Version, TAS Connection, User Name, and Login Time


125

Landslide Work Area: Window Tree

Navigation Bar

Main Menu


Window Tree Pane (Open Test Sessions)


126

Landslide Work Area: Connection Status

Navigation Bar

Main Menu



Connection Status


127

Landslide Work Area: Client Resource Monitor

Navigation Bar

Main Menu



Connection Status

Client Resource Monitor


128

Landslide Work Area: Work Area

Navigation Bar

Main Menu



Connection Status

Client Resource Monitor

Work Area


129


Network Browser Tab

130

Session Builder

Add TestCases

Report Settings

Iterations

Test Duration

Reserve physicalresources


131

Test Session: Automation Control

Automate a complex sequence of test case eventsOrder events sequentially

Trigger one event from another event

Execute a test case more than once

Program delays between events.


132

Test Session: Pass/Fail Tab

Pass/Fail Criteria provides an accurate pass or fail statusDuring a test

At the end of a test


133

Set Pass/Fail Criteria

Condition:Test State or Step

Measurement

Test Case State

Compare Two Measurements

Result Type:Pass or Fail


134

Test Session / Reports Tab


135

Test Session Builder Menu

File MenuClose the Test Session window

Save As Tcl

Logs MenuClear Display Clears the test log

Save the displayed log

Open TAS Log: Retrieves the test log when you reconnect to a test session


136

Reports Menu

Reports MenuSave:

Retrieve All test Results:

View Local Results Directory: Only after you have retrieved the test results to a local directory

Generate TAC Report: Technical Assistance Center

Generate a per-session report


137

Test Architecture

TEST SESSION TAS

LIBRARIES

AUTOMATIONCONTROL

USERACCOUNTS

TESTRESULTS

SITECONFIG


138

Test Architecture

TEST SESSION

Test Case

Test Case

EMBEDDED

TAS

LIBRARIES

AUTOMATIONCONTROL

USERACCOUNTS

TESTRESULTS

SITECONFIG


139

Test Architecture

TEST SESSION

LINKED

Test Case

Test Case

TAS

LIBRARIES

AUTOMATIONCONTROL

USERACCOUNTS

TESTRESULTS

SITECONFIG


140

Test Architecture

TEST SESSION

Test Case

LINKED

Test CaseTest Case

Test Case

EMBEDDED

TAS

LIBRARIES

AUTOMATIONCONTROL

USERACCOUNTS

TESTRESULTS

SITECONFIG


141

Network Browser: Add a Test Case


142


New Test Case

Network Browser

143

Test Case Diagram

SUTs are green

Emulated nodes are blue

Active traffic paths are black

Grouped tabs for Test Case Configuration parameters

Unused devices and unused

traffic paths are in gray

CollapsibleFrames


144

Test Case Settings


145

Thank You


146

Landslide Test Resultswww.spirentcampus.com

147

Landslide Test Results2

Test Result Topic Overview

Landslide Real-Time Results

Landslide User Guide Measurement Reference

Ethernet Capture

Saved Test Results and .PCAPs

Reports

Results Manager

148


Test Log

The test log contains:Detailed progress messages, Warnings Errors, and operational messages

A valuable aid in troubleshootingconfigurationproblems

Automatically saved when a test is complete

149


Reports Tab

Real-Time Results

Displayed until the next test is run

150


Reports Intervals

Real-Time Results


Displayed in 15 Second Intervals

151


Reports View

Real-Time Results



View a summary of results or per Test Case

152


Reports Measurement Display

Real-Time Results




Each measurement can be displayed per-interval or cumulative

153


Reports Tabs

Real-Time Results




Each measurement can be displayed per-interval or cumulative

Measurement types are grouped by functionality in tabs

154

Graphing Real-Time Results

Ability to create 2 graphs8 measurements each

Right mouse-click on a resultrow header

Add to graph #

New tab is createdGraph 1 or 2


155

Real-Time Results Graph Tab

Change position of Y-Axis to make reading results easier

10 Landslide Test Results

156



Turn Interval Markers on and off

11

ON

OFF

Landslide Test Results

157




Display Delta (measurement x measurement y)

12

DELTA


158





Customize the graph display: Grids and 0 value display


159





Customize the graph display: Grids and 0 value display

Copy thegraph to theclipboard,or save it asa .jpg


160

Session Builder TabReport Filters

Change the measurements and tabs that are displayed on the Reports tab

Once configured, filterscan be turned on and off

Report Filters


161

Landslide Measurement Reference

Landslide User GuideLandslide Home Page

GUI Navigation Bar

F1 from the GUI

Measurements are listed by tab

Measurements anderrors are defined

and explained


162

.PCAP Ethernet Port Capture

Open Test Server Administration WindowAdmin Menu

Navigation Bar

Select Test Server

Select Eth Interfaceto capture by clickingCapture checkbox

Capture is activeanytime checkbox isenabled

Capture Files are stored on the TAS


163


Test Results Page

Test results and saved logfiles are archived on the TAS

Accessible from:Landslide Home Page:Opens a list of userlibraries

View Menu

NavigationBar

164

Test Results

Files saved for each testLog Files

.xls Results Spreadsheet

.PCAP Ethernet capture files

.DB Results database files if applicable


165

Click on filename.xls to open a results fileNaming Convention for test results: date_time_test session-name_Run-Iteration-Number.xls

Worksheet tabs are the same as real-time results tabs

Test Results: .xls


166

Test Results: .log.txt

Naming Convention for log files are the same as for .xls results

Log files from the real-time LOGS tab are archived for each test


167

Naming convention for .pcap results is:Test-Server_Ethernet-Interface_Capture.pcap

Test Results: .pcap


168

Report Options

Session BuilderTab

Report Options

Configure customreporting views and includedstatistics

Select report format andtiming

Generate End-of-Testdatabase file

Creates a meas.db reportto open in Results Manager


169

Test Session Reports Menu

Reports MenuSave: Allows you to save the current results to a local directory

Retrieve all Results Files: Saves .xls,.log.txt, and meas.db files locally

Allows you the opportunity to openresults from once retrieved

Meas.db will open Results ManagerView Local Results Directory: Onlyavailable after results areretrieved

Generate TAC Report:For use by Spirent Technical Support


170

Results Manager

Separate program

Display and customize results using meas.db or .csv

Launch from Reports menu / Retrieve All Results

Launch from Landslide browser home page


171

Results Manager Elements


Contents Tree Display Area

26

172

Results Manager File Name


Result file name: Landslide Test Information


173

Results Manager Time Stamp



Date and time test completed


174

Results Manager Test Session Name




Test Session Name


175

Results Manager Measurements




Test Session Name


Measurements: All test result data by test case and tab

176

Results Manager Configuration




Test Session Name



Configuration: Complete test configuration information

177

Results Manager Template




Test Session Name



Configuration: Complete test configuration information

Template: Up to 4 custom graphs and tables

178

Thank You


179

Essentials of LandslideTable of ContentsLandslide Hardware and ArchitectureLandslide Test ApplicationsLandslide Test ActivitiesLandslide Test OptionsLandslide Browser IntroductionLandslide TAS ManagerLandslide System AdministrationLandslide Client Work EnvironmentLandslide Test Results

essentials of landslide

Documents

test applications

test activities

test results

system administration

firstoperating system

particular purpose

inch rackmountable5

international copyright