espace u1910 unified gateway v100r001c01spc600 software installation guide 06

eSpace U1910 Unified Gateway V100R001C01SPC600

Software Installation Guide

Issue 06

Date 2013-01-24

HUAWEI TECHNOLOGIES CO., LTD.

Issue 06 (2013-01-24) Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd. i

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and

the customer. All or part of the products, services and features described in this document may not be

within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,

information, and recommendations in this document are provided "AS IS" without warranties, guarantees or

representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: http://enterprise.huawei.com

eSpace U1910 Unified Gateway

Software Installation Guide Contents


Copyright Huawei Technologies Co., Ltd.

ii

Contents

1 Installing the eSpace Local Maintenance Terminal ............................................................... 1

1.1 Installing the LMT ........................................................................................................................................... 1

1.1.1 Installation Preparations .......................................................................................................................... 1

1.1.2 Installing the LMT Server ....................................................................................................................... 8

1.1.3 Installing the LMT Client...................................................................................................................... 13

1.2 Uninstalling the LMT ..................................................................................................................................... 14

2 Installing the File Server ........................................................................................................... 15

2.1 Installing the NFS Server in the Windows Server 2008 Operating System ................................................... 15

2.1.1 Checking the Installation Environment ................................................................................................. 15

2.1.2 Installing the NFS Service .................................................................................................................... 16

2.1.3 Installing and Configuring the AD LDS ............................................................................................... 24

2.1.4 Configuring an NFS Shared Folder ....................................................................................................... 60

2.2 Installing the NFS in the Windows Server 2003 Operating System ............................................................... 63

2.2.1 Installation Preparations ........................................................................................................................ 63

2.2.2 Installation Procedure ........................................................................................................................... 65

2.2.3 Configuring Windows Services for UNIX ............................................................................................ 67

2.2.4 Configuring a Shared Folder ................................................................................................................. 69

2.3 Configuring the NFS in the Linux Operating System .................................................................................... 71

2.3.1 Installing the NFS File Server ............................................................................................................... 71

2.3.2 Enabling an NFS Service ...................................................................................................................... 73

2.3.3 Configuring a Shared Folder ................................................................................................................. 74

2.4 Configuring Data on the eSpace U1900 series ............................................................................................... 74

2.5 Verifying the Configuration............................................................................................................................ 75


Software Installation Guide 1 Installing the eSpace Local Maintenance Terminal



1

1 Installing the eSpace Local Maintenance Terminal

About This Chapter

The LMT (eSpace Local Maintenance Terminal) is a tool used to load, configure, and monitor

the eSpace U1900 series. It supports Suse Linux and Windows operating systems.

1.1 Installing the LMT

The topic describes the installation preparations, the operations of installing and uninstalling

the LMT.

1.2 Uninstalling the LMT

The topic describes the operations of uninstalling the LMT.

1.1 Installing the LMT

The topic describes the installation preparations, the operations of installing and uninstalling

the LMT.

1.1.1 Installation Preparations

Before installing the LMT, check the installation environment and the version.

Checking the Installation Environment

Before installing the LMT, confirm the installation environment.

Before installing the LMT, refer to Table 1-1 to check the installation environment.

Table 1-1 Installation environment

Component Requirement

Server Operating

System

Windows XP, Windows 7, Windows Server 2003, Windows

Server 2008 R2 or SuSE 11 SP1 64-bit

NOTE





2

Component Requirement

You are advised to install the server on a host running the Windows

Server 2008 R2 or Linux SuSE 11 64-bit SP1 operating system.

CPU Dual core 2.0 GHz or above

Memory 2 GB or more

Hard disk 80 GB or more

Client

Operating

System Windows XP or Windows 7

CPU Dual core 2.0 GHz or above

Memory 2 GB or more

Hard disk 80 GB or more

Display Resolution: 1280 x 1024 or above

Others DVD-ROM, USB keyboard and mouse, and standard

extension interfaces

Obtaining the Correct Version

Before installing the LMT, you must obtain the LMT installation package of the correct

version and verify the integrity of the installation package.

Prerequisites

You have learned about the device version. To obtain the device version, connect the device to

the LMT through the serial port (Logging In to the eSpace U1910 Using the CLI) and run the

show version command.

Obtaining the Correct Version

Obtain the official version of the LMT for the corresponding device version from

http://support.huawei.com.

The files to obtain are as follows:

Client: LMTClient.rar

Server

Windows operating system: LMTServerSetUp.exe

SuSE operating system: suse11-LMTServer.zip

Before installing the LMT, refer to Table 1-2 to understand the installation package structure.

Table 1-2 Structure of the installation package

Home Directory Subdirectory Description

Server Server suse Indicates the installation package of the tool server in the SuSE Linux operating





3

Home Directory Subdirectory Description

system.

Currently, only the 64-bit SuSE operating

system is supported.

Server win Indicates the installation package of the

tool server in the Windows operating

system.

Currently, only the 32-bit Windows

operating system is supported.

Client / Indicates the installation package of the

tool client.

Verifying the Integrity of the Installation Package

You must verify the integrity of the installation package before installing the LMT.

The procedure is as follows:

1. Obtain the file signature verification tool.

The file signature verification tool is stored in ..\Software\04 Tools\LMT.

The file signature verification tool can be executed only in Windows Vista and Windows Server

2008 or higher.

The libeay32.dll file delivered with the file signature verification tool is a file required to run the

tool.

2. Double-click FileIntegrityVerify.exe.

The File Integrity Verify Tool window is displayed.

3. Select the path for storing the LMT installation package, and click Verify.

If "Success" is displayed for all items, the integrity of the installation package is

successfully verified.

If "Failure" or "No Sign Data" is displayed for any item, the verification failed.

Obtain the LMT installation package of the correct version again.

If the file to be checked is not in the Windows operating system, copy the file to the Windows

operating system before using the tool to check the integrity of the file.

Planning the Installation

LMT must be installed based on the installation plan.

Before installing the LMT, see Table 1-3 to plan the installation.





4

Windows operating system: You are advised to deploy the LMT server and the LMTclient on the

same PC.

SuSE operating system: You are advised to deploy the LMT server and the LMT client on the same

network segment.

Table 1-3 Installation plan

Item Policy Example

LMT server Ensure that the IP address of the

server is on the same network

segment as the IP address on network

port FE1 of the eSpace U1910.

Windows:

192.169.103.187

SuSE: 192.169.103.92

LMT client The IP addresses of the client and

server are on the same network

segment.

192.169.103.187

Checking Whether the Software Is Installed in the Windows Operating System

Before installing the LMT, check whether it is already installed on the computer.

Context

The LMT client and the LMT server for SuSE do not require installation. Therefore, you only

need to check whether the LMT server is already installed in the Windows operating system.

Procedure

Step 1 Choose Start > All programs to check whether the LMTServer items exist.

If yes, it indicates that the LMT is already installed.

If no, it indicates that the LMT is not installed.

Step 2 Choose Start > All Programs > LMTServer to start the LMT server.

Step 3 View the LMT server title bar . If the version displayed is different from the version that needs to be installed, uninstall the

software. For details, see 1.2 Uninstalling the LMT.

----End

Upload the Installation Package to the Server

Before installing the LMT server in the Linux operating system, upload the installation

package for SuSE to the server.

Prerequisites

The installation package LMTServer_suse11.zip has been obtained and stored in

D:\Server_suse on the local PC.





5

Procedure

Step 1 Log in to the server as the root user.

Step 2 Run the mkdir Server_suse command to create a folder.

Run the ls command. The following information shown in Figure 1-1 is displayed.

Figure 1-1 Creating the Server_suse folder

Step 3 Start the vsftpd service.

If the vsftpd service is not installed in the SuSE operating system, insert the SuSE installation CD-ROM

to install the service.

1. Run the vi /etc/vsftpd.conf command to set the following parameters in the vsftpd configuration file:

anonymous_enable = NO /Disable the function of anonymous access./

local_enable = YES /Enable the service of local user login./

write_enable = YES /Enable the write permissions for all users./

2. Run the service vsftpd status command to check the vsftpd operating status.

linux-w098:/ # service vsftpd status

Checking for service vsftpd running

If running is displayed, the vsftpd service is running.

Run the service vsftpd restart command to restart the vsftpd service.

linux-w098:/ # service vsftpd restart

Shutting down vsftpd done

Starting vsftpd done

If unused is displayed, run the service vsftpd start command to start the vsftpd

service.

linux-w098:/ # service vsftpd start

Starting vsftpd done

Step 4 On the local PC where the installation package is stored, upload the installation package to the Server_suse folder on the server in binary mode.

To use FTP to upload the installation package, proceed as follows:

1. Choose Start > Run and enter cmd.

2. In the command-line interface that is displayed, run the ftp 192.169.103.92 command. The following information is displayed.

C:\Documents and Settings\Administrator>ftp 192.169.103.92 //192.169.103.92 is

the server IP address.





6

Connected to 192.169.103.96.

220 (vsFTPd 2.0.7)

User (192.169.103.92:(none)):

3. Enter the root user name and the corresponding password:

User (192.169.103.92:(none)): root

331 Please specify the password.

Password:

230 Login successful.

If the root user cannot log in to the server, modify the permissions for the root user on the server.

Run the vi /etc/ftpusers command, and delete root in the file or prefix it with a number sign (#).

4. Run the bin command to switch to the binary mode for uploading the installation package.

ftp> bin

200 Switching to Binary mode.

5. Run the cd /Server_suse command to access the destination path for uploading the installation package:

ftp> cd /Server_suse

250 Directory successfully changed.

6. Run the lcd d:\Server_suse command to access the source installation package:

ftp> lcd d:\Server_suse

Local directory now D:\Server_suse.

7. Run the put LMTServer_suse11.zip command to upload the installation package:

ftp> put LMTServer_suse11.zip

200 PORT command successful. Consider using PASV.

150 Ok to send data.

226 File receive OK.

8. Run the bye command to exit the FTP service after the upload is complete.

----End

Checking Whether the Port Is Used

Before installing the LMT, ensure that the ports are not used.

Context

When you install LMT, the following ports need to be used:

Server port: 8877 (by default)

If port 8877 is used by other applications, another idle port can be chosen.

The port number ranges from 1024 to 65534.

Telnet Server port: 23





7

TFTP port: 69

Before you install the LMT, disable the firewall and ensure that the preceding ports are not

used.

The following describes how to check whether the port is used and how to handle the used

situation in Windows and Linux operating systems.

Procedure In the Windows Operating System

1. Choose Start > Run, and enter cmd.

2. In the command-line interface that is displayed, run the netstat -aon | findstr port command to display the port information, as shown in Figure 1-2. If the port is used,

proceed to Step 3. If the port is unused, skip Step 3.

3. If the port is used, run the tasklist | findstr Process ID (PID) command to display the information about the software that is using the port, as shown in Figure 1-2.

Figure 1-2 Port information in the Windows operating system

If the information about the server port, Telnet port or TFTP port is not displayed, it indicates that the

port is not used.

4. Disable the software based on the software information that is displayed.

In the SuSE Linux Operating System

Log in to the server as the root user and run the lsof -i: PortID command.

If the port information is not displayed, it indicates that the port is not occupied.

If the information similar to the following is displayed, disable the related software.

For example, if the port 8877 is used by the LMTServer as shown in Figure 1-3,

disable the LMTServer to release the port.

Figure 1-3 Port information in the Linux operating system

----End





8

1.1.2 Installing the LMT Server

The topic describes the operations of installing the LMT server in the Windows and SuSE

operating systems.

Installing the Tool Server in the Windows Operating System

The topic describes the installation steps and installation verification of the LMT server in the

Windows operating system.

Prerequisites

You have obtained the LMT installation package for Windows at

http://enterprise.huawei.com.

There is at least 3 GB of available disk space.

Procedure

Step 1 Double-click LMTServerSetUp.exe in the LMT server folder.

The dialog box for selecting the installation language is displayed. In the dialog box, select

English.

Step 2 Click OK.

The Welcome to the LMTServer Setup Wizard dialog box is displayed, as shown in Figure

1-4.

Figure 1-4 Welcome to the LMTServer Setup Wizard dialog box





9

Step 3 Click Next.

The Select Destination Location dialog box is displayed, as shown in Figure 1-5.

Figure 1-5 Select Destination Location dialog box

Step 4 You are advised to use the default installation path C:\Program Files\LMTServer. You can click Browse... to choose another installation path, and click Next.

The Select Additional Tasks dialog box is displayed, as shown in Figure 1-6.





10

Figure 1-6 Select Additional Tasks dialog box

Step 5 No shortcut is created by default. You can select any shortcuts as required, and click Next.

The Ready to Install dialog box is displayed, as shown in Figure 1-7.

Figure 1-7 Ready to Install dialog box





11

Step 6 Verify that the installation path is correct, and click Install.

A dialog box shown in Figure 1-8 is displayed after the installation is complete.

Figure 1-8 Completing the LMTServer Setup Wizard dialog box

Step 7 Click Finish.

The Launch LMTServer check box is selected by default. In this way, the LMT server

automatically starts after the installation is finished. You can deselect the Launch

LMTServer check box, and choose Start > All program > LMTServer to start the LMT

server later. If the page shown in Figure 1-9 is displayed, the LMTServer is installed

successfully.

Figure 1-9 Running the LMTServer

Step 8 If you need to customize the server port, proceed as follows:

The default server port is 8877.





12

Before using the port, verify that the port is not used. For details, see Checking Whether the Port Is

Used.

1. Open the Configuration folder in the LMT server installation path.

2. Use the Notepad to open the configuration.properties file, and locate the following information: channel.client.bin.port = 8877.

3. Change 8877 to the customized port in the preceding information, and save the settings.

4. Restart the LMT server.

----End

Installing the Tool Server in the Linux Operating System

The topic describes the installation steps and installation verification of the LMT server in the

Linux operating system.

Prerequisites

You have obtained the LMT installation package for SuSE at http://enterprise.huawei.com.

There is at least 3 GB of available disk space.

Procedure

Step 1 Log in to the server as the root user.

The topic assumes that the installation package is stored in Server_suse, for example,

Server_suse/LMTServer_suse11.zip.

Step 2 Run the cd /Server_suse command to access the Server_suse folder.

Step 3 Run the unzip LMTServer_suse11.zip command to decompress the installation package. After decompression, a folder named LMTServer_suse11 is generated, where the

LMTServer is stored. The installation is complete.

If the LMTServer_suse11 folder already exists before decompression, run the rm -rf

LMTServer_suse11 command to delete the folder before running the unzip

LMTServer_suse11.zip command.


For details about how to customize the server port, see Step 8.

----End

Follow-up Procedure

After the installation is complete, perform the following steps to start the LMT server.

1. Run the chmod -R 777 LMTServer_suse11 command to change the permissions of the LMTServer_suse11 folder for the root user.

Run the ls -al command to view the changed permissions. If drwxrwxrwx is displayed,

the change is successful, as shown in Figure 1-10.





13

Figure 1-10 Changing permissions

2. Run the cd LMTServer_suse11 command to access the installation path.

3. Run the ./LMTServer.sh command to start the LMT server.

If the page shown in Figure 1-11 is displayed, the LMTServer is installed successfully.

Figure 1-11 Running the LMTServer

1.1.3 Installing the LMT Client

The topic describes the installation steps and installation verification of the LMT client.

Installation Steps

This topic describes the installation steps of the LMT client.

Context

The LMT client does not require installation. Double-click LMTClient.exe in the

LMTClient folder to start the LMT client.


If a customized port is set when installing the LMT server, modify the connection port for the LMT

client. For details, see Procedure.

Procedure

Step 1 Open the LMTClient\Config folder.

Step 2 Use the Notepad to open the loginConfig.cfg file.

Step 3 Change the port in bold in the following information to the customized server port.

{'pwd': '', 'user_name': u'admin', 'port': u'8877', 'server_ip': u'192.169.103.187'}

Step 4 Save the settings and double-click LMTClient.exe to start the LMT client.

----End





14

Installation Verification

If the LMT client can connect to the LMT server, the LMT installation is successful.

Result

If the workspace page shown in Figure 1-12 is displayed after the LMT client starts, the LMT

client connects to the server successfully.

Figure 1-12 LMT workspace page

The default user name and password for login are admin and huawei123.


The topic describes the operations of uninstalling the LMT.

Context

The LMT client and the LMT server for SuSE do not require installation. To uninstall the

software, you only need to delete software directories.

To uninstall the LMT server in the Windows operating system, proceed as follows:

Procedure

Step 1 Choose Start > All programs > LMTServer > Uninstall LMTServer. The Uninstall dialog box is displayed.

Step 2 Click Yes to start the uninstallation. The LMTServer Uninstall dialog box is displayed.

Step 3 Click Yes to confirm the uninstallation.

Step 4 After the uninstallation is complete, the message is displayed, indicating that the LMT server is uninstalled successfully.

----End


Software Installation Guide 2 Installing the File Server



15

2 Installing the File Server About This Chapter

Install the NFS file sever for storing recording files before you configure the voice mailbox

service.

2.1 Installing the NFS Server in the Windows Server 2008 Operating System

This topic describes how to install and configure the NFS server in the Windows Server 2008

operating system.

2.2 Installing the NFS in the Windows Server 2003 Operating System

This topic describes how to install and configure the NFS in the Windows operating system.

2.3 Configuring the NFS in the Linux Operating System

This topic describes how to configure the NFS in the Linux operating system.

2.4 Configuring Data on the eSpace U1900 series

This topic describes how to configure data on the eSpace U1910.

2.5 Verifying the Configuration

This topic describes how to verify the configuration of the NFS server after it is installed.

2.1 Installing the NFS Server in the Windows Server 2008 Operating System

This topic describes how to install and configure the NFS server in the Windows Server 2008

operating system.

2.1.1 Checking the Installation Environment

This topic describes how to verify that the installation environment is appropriate before

installing the NFS server.





16

Procedure

Step 1 Choose Start > Computer.

Step 2 Right-click the disk where the NFS server is to be installed (for example, disk E). Choose Properties from the shortcut menu that is displayed.

Step 3 In the Properties dialog box that is displayed, check the disk's file system, as shown in Figure 2-1.

To ensure that Universal Access Platform can normally record and play voices, New

Technology File System (NTFS) must be used. If the file system is not NTFS, reinstall the

operating system.

Figure 2-1 Properties dialog box

----End

2.1.2 Installing the NFS Service

This topic describes how to install the NFS service.

Procedure

Step 1 Log in to the file server as the administrator user.

Step 2 Choose Start > Administrative Tools > Server Manager.

The Server Manager window is displayed.

Step 3 Add the Services for Network File System Tools feature.

1. In the Server Manager window, select Features from the navigation tree.

Details about features are displayed in the right area, as shown in Figure 2-2.





17

Figure 2-2 Details about features

2. Click Add Features.

The Add Features Wizard dialog box is displayed.

3. Choose Remote Server Administration Tools > Role Administration Tools > File Services Tools, and select the Services for Network File System Tools check box, as

shown in Figure 2-3.

Figure 2-3 Selecting a feature

4. Click Next.

The Confirm Installation Selections dialog box is displayed.

5. Confirm the installation information, and click Install.

The Installation Progress dialog box is displayed. When the installation is complete, the

message "Installation succeeded" is displayed on the page shown in Figure 2-4.





18

Figure 2-4 Installation succeeded

6. Click Close.

Step 4 Verify that File Services has been installed.

In the Server Manager window, select Roles from the navigation tree. Details about roles are

displayed in the right area, as shown in Figure 2-5.





19

Figure 2-5 Details about roles

If File Services is not displayed in the Roles Summary area, File Services is not

installed. Go to Step 5.

If File Services is displayed in the Roles Summary area, File Services is installed. Go

to Step 6.

Step 5 Install File Services and Services for Network File System.

1. Click Add Roles.

The Before You Begin dialog box is displayed.

2. Click Next.

The Select Server Roles dialog box is displayed.

3. Select File Services, as shown in Figure 2-6.





20

Figure 2-6 Select Server Roles dialog box

4. Click Next.

The File Services dialog box is displayed.

5. Click Next.

The Select Role Services dialog box is displayed.

6. In the Role Services list box, select the File Server and Services for Network File System check boxes, as shown in Figure 2-7.





21

Figure 2-7 Select Role Services dialog box

7. Click Next.









22


9. Click Close.

Step 6 Perform the following operations if File Server is installed:

1. In the File Services area, click Add Role Services.

The Add Role Services dialog box is displayed.

2. In the Role Services list box, select the Services for Network File System check box, as shown in Figure 2-9.





23

Figure 2-9 Select Role Services dialog box

3. Click Next.









24


5. Click Close.

----End

2.1.3 Installing and Configuring the AD LDS

The Active Directory Lightweight Directory Services (AD LDS) is an independent mode of

Active Directory that provides dedicated directory services for applications. It provides a data

store and services for accessing the data store. You can configure and manage the AD LDS.

Installing the AD LDS

This topic describes how to install the AD LDS.

Procedure

Step 1 Choose Start > Administrative Tools > Server Manager.


Step 2 In the Server Manager window, select Roles from the navigation tree.

Details about roles are displayed in the right area, as shown in Figure 2-11.





25

Figure 2-11 Server Manager window

Step 3 Click Add Roles.

The Before You Begin dialog box is displayed.

Step 4 Click Next.

The Select Server Roles dialog box is displayed, as shown in Figure 2-12.





26

Figure 2-12 Select Server Roles dialog box

Step 5 Select the Active Directory Lightweight Directory Services check box.

The message "Add features required for Active Directory Lightweight Directory Services?" is

displayed, as shown in Figure 2-13.

Figure 2-13 Adding a feature

Step 6 Click Add Required Features. The Select Server Roles dialog box is displayed.

In the Select Server Roles dialog box, the Active Directory Lightweight Directory Services

check box is selected.

Step 7 Click Next.

The Active Directory Lightweight Directory Services dialog box is displayed.

Step 8 Click Next.





27


Step 9 Click Install.

The Installation Progress dialog box is displayed. The installation takes several minutes.

When the installation is complete, the Installation Results dialog box is displayed, as shown

in Figure 2-14.

Figure 2-14 Installation Results dialog box

Step 10 Click Close.


Step 11 Click . The Server Manager window is closed.

----End

Installing AD LDS Instances

Multiple AD LDS instances can be installed on a computer. During installation, each instance

is assigned an independent folder, a unique service name, and unique service description.

Prerequisites

The name of the computer where the file server is installed has been obtained. To obtain the

computer name, proceed as follows: Right-click Computer on the desktop, or choose Start >

Computer and right-click in the blank area. Choose Properties from the shortcut menu.





28

Click the Computer Name tab in the System Properties dialog box and find the computer

name. Assume that the computer name is Win-DRTVNVDH67M.

Procedure

Step 1 Choose Start > Administrative Tools > Active Directory Lightweight Directory Services Setup Wizard.

The Welcome to the Active Directory Lightweight Directory Services Setup Wizard

dialog box is displayed.

Step 2 Click Next.

The Setup Options dialog box is displayed, as shown in Figure 2-15.

Figure 2-15 Setup Options dialog box

Step 3 Click A unique instance, and click Next.

The Instance Name dialog box is displayed, as shown in Figure 2-16.





29

Figure 2-16 Instance Name dialog box

Step 4 Enter the instance name (for example, nfsinstance) in the Instance name text box, and click Next.

The Ports dialog box is displayed, as shown in Figure 2-17.





30

Figure 2-17 Ports dialog box

Step 5 Retain the default values for LDAP port number and SSL port number. Click Next.

The Application Directory Partition dialog box is displayed, as shown in Figure 2-18.





31

Figure 2-18 Application Directory Partition dialog box

Record the setting of LDAP port number, which will be used for subsequent configuration tasks (for

example, Extending the AD LDS Schema).

Step 6 Configure the application partition.

1. Click Yes, create an application directory partition.

2. Set Partition name.

The Partition name value is in the CN=Partition,DC=Computer name format. Generally, the Partition

parameter is set to the instance name. For example, if the instance name is nfsinstance and the computer

name is Win-DRTVNVDH67M, set Partition name to CN=nfsinstance,DC=Win-DRTVNVDH67M.

Step 7 Click Next.

The File Locations dialog box is displayed, as shown in Figure 2-19.





32

Figure 2-19 File Locations dialog box

Step 8 Set Data files and Data recovery files to a folder where you want to store the AD LDS-related files, and click Next.

The Service Account Selection dialog box is displayed, as shown in Figure 2-20.





33

Figure 2-20 Service Account Selection dialog box

Step 9 Click Network service account, and click Next.

If this computer is not in a domain, a warning message is displayed, as shown in Figure 2-21.

Figure 2-21 Warning message

Step 10 Click Yes.

The AD LDS Administrators dialog box is displayed, as shown in Figure 2-22.





34

Figure 2-22 AD LDS Administrators dialog box

Step 11 Click Currently logged on user, and click Next.

The Importing LDIF Files dialog box is displayed, as shown in Figure 2-23.





35

Figure 2-23 Importing LDIF Files dialog box

Step 12 Select the MS-InetOrgPerson.LDF and MS-User.LDF check boxes, and click Next.

The Ready to Install dialog box is displayed.

Step 13 Click Next to install the AD LDS instance.

When the installation is complete, the Installing AD LDS dialog box is displayed.


Step 15 Verify that the new AD LDS instance nfsinstance exists.

1. Choose Start > Run.

The Run dialog box is displayed.

2. Enter services.msc in Open, and click OK.

The Services window is displayed, as shown in Figure 2-24.





36

Figure 2-24 Services window

If the AD LDS instance nfsinstance exists, the installation is successful. If the instance

does not exist, reinstall the AD LDS instance.

3. Click . The Services window is closed.

To delete an AD LDS instance, do as follows:

On the Control Panel page, click Uninstall a program under Programs.

On the displayed Uninstall or change a program page, double-click the AD LDS instance to be

deleted and perform operations as prompted.

----End

Extending the AD LDS Schema

This topic describes how to extend the AD LDS schema.

Procedure

Step 1 Click Start, right-click Command Prompt, and choose Run as administrator from the shortcut menu.

The Administrator: Command Prompt window is displayed.

Step 2 Run the following commands to import the MS-AdamSchemaW2K8.LDF file:

cd C:\WINDOWS\ADAM

ldifde -i -u -f MS-AdamSchemaW2K8.LDF -s localhost:389 -c "CN=Configuration,DC=X"

#configurationNamingContext





37

In this example, the AD LDS instance uses the default LDAP port number 389. This port number is set

in Figure 2-17 in Installing AD LDS Instances. Except port number 389, you are not allowed to modify

"CN=Configuration,DC=X" or #configurationNamingContext in the command.

Figure 2-25 shows the command output.

Figure 2-25 Administrator: Command Prompt window

Step 3 Enter exit to exit the Administrator: Command Prompt window.

----End

Configuring a Default Naming Context

By default, an AD LDS instance does not provide a naming default context. You can, however,

configure the AD LDS to provide a default naming context by specifying a value for the

msDS-defaultNamingContext attribute on the NT Directory Service Agent (NTDSA) object.

Procedure

Step 1 Choose Start > Administrative Tools > ADSI Edit.

The ADSI Edit window is displayed, as shown in Figure 2-26.

Figure 2-26 ADSI Edit window





38

Step 2 In the navigation tree, right-click ADSI Edit, and choose Connect to from the shortcut menu.

The Connection Settings dialog box is displayed.

1. In the Connection Point area, click Select a well known Naming Context, and select Configuration from the drop-down list box.

2. In the Computer area, click Select or type a domain or server: (Server | Domain [:port]), and enter localhost:389 in the text box, as shown in Figure 2-27.


in Figure 2-17 in Installing AD LDS Instances.

Figure 2-27 Connection Settings dialog box

3. Click OK. The ADSI Edit window is displayed.

Step 3 In the navigation tree, choose Configuration > CN=Configuration > CN=Sites > CN=Default-First-Site-Name > CN=Servers > CN=Computer name $ AD LDS instance

name > CN=NTDS Settings, as shown in Figure 2-28.





39

Figure 2-28 Navigation tree

Step 4 Right-click CN=NTDS Settings, and choose Properties from the shortcut menu.

The CN=NTDS Settings Properties dialog box is displayed, as shown in Figure 2-29.

Figure 2-29 CN=NTDS Settings Properties dialog box

Step 5 Click msDs-DefaultNamingContext, and click Edit.

The String Attribute Editor dialog box is displayed, as shown in Figure 2-30.





40

Figure 2-30 String Attribute Editor dialog box

Step 6 Enter CN=nfsinstance,DC=Win-DRTVNVDH67M in the text box, and click OK.

nfsinstance: AD LDS instance name.

Win-DRTVNVDH67M: computer name.

Step 7 Click OK. The ADSI Edit window is displayed.

Step 8 Click . The ADSI Edit window is closed.

----End

Updating the Active Directory Schema

To update the Active Directory schema, you must change the directory server and add

gidNumber and uidNumber schema objects.

Procedure



Step 2 Run the following commands to enable the Active Directory plug-in schmmgmt.dll:

cd C:\WINDOWS\ADAM

regsvr32 schmmgmt.dll //The message DllRegisterServer in schmmgmt.dll succeeded. is

displayed. Click OK.

exit //Exit the CLI.

Step 3 Choose Start > Run.

The Run dialog box is displayed.

Step 4 Enter mmc in Open, and click OK.

The Console1 window is displayed, as shown in Figure 2-31.





41

Figure 2-31 Console1 window

Step 5 Choose File > Add/Remove Snap-in.

The Add or Remove Snap-ins dialog box is displayed.

Step 6 In the Available snap-ins list box, select Active Directory Schema, and click Add.

The Active Directory Schema item is moved from Available snap-ins to Selected snap-ins,

as shown in Figure 2-32.

Figure 2-32 Add or Remove Snap-ins dialog box

Step 7 Click OK. The Console1 window is displayed, as shown in Figure 2-33.





42

Figure 2-33 Console 1 after the Active Directory schema is added

Step 8 Right-click Active Directory Schema, and choose Change Active Directory Domain Controller from the shortcut menu.

The Change Directory Server dialog box is displayed, as shown in Figure 2-34.

Figure 2-34 Change Directory Server dialog box

Step 9 In the Change to area, modify to the server name and port number, such as localhost:389.

Step 10 Select localhost:389, and click OK.

In this example, the AD LDS instance uses the default LDAP port number 389. This port

number is set in Figure 2-17 in Installing AD LDS Instances.

Step 11 (Optional) Perform the following operations if Active Directory Schema fails to be expanded in the Console1 window:

1. Choose File > Save.

The Save As dialog box is displayed, as shown in Figure 2-35.





43

Figure 2-35 Save As dialog box

2. Set File Name to the name of the management console file, such as nfsmmc, and click Save.

3. Click . The Console1 window is closed.

4. Choose Start > Run, enter mmc in Open, and click OK.

5. Choose File > Open.

The Open dialog box is displayed, as shown in Figure 2-36.

Figure 2-36 Open dialog box

6. Select the nfsmmc file, and click Open.

Step 12 Add the gidNumber and uidNumber schema objects to the user class.

1. Choose Active Directory Schema > Classes, right-click user, and choose Properties from the shortcut menu.

The User Properties dialog box is displayed, as shown in Figure 2-37.





44

Figure 2-37 User Properties dialog box

2. Click the Attributes tab, and click Add on the Attributes tab page.

The Select Schema Object dialog box is displayed, as shown in Figure 2-38.





45

Figure 2-38 Select Schema Object dialog box

3. Select gidNumber, and click OK.

4. Repeat the preceding steps to add the uidNumber schema object.

5. In the User Properties dialog box, click OK.

The Active Directory Schema dialog box is displayed, as shown in Figure 2-39.

Figure 2-39 Active Directory Schema dialog box

6. Click Continue running and ignore errors with this snap-in for the rest of the session., and click OK.





46

7. Verify that the gidNumber and uidNumber schema objects are added to the user class successfully.

Before viewing the result, you are advised to click or drag the scroll bars in the navigation

tree and the right pane. If you do not do this, the console window may exit abnormally.

When you click user in the navigation tree, gidNumber and uidNumber are displayed in the

right pane, as shown in Figure 2-40, which indicates that the schema objects are added

successfully. If they do not exist, add them again.

Figure 2-40 Verifying the result

Step 13 Add the gidNumber schema object to the group class.

1. Choose Active Directory Schema > Classes, right-click group, and choose Properties from the shortcut menu.

The Group Properties dialog box is displayed, as shown in Figure 2-41.





47

Figure 2-41 Group Properties dialog box

2. Click the Attributes tab, and click Add on the Attributes tab page.

The Select Schema Object dialog box is displayed, as shown in Figure 2-42.





48

Figure 2-42 Select Schema Object dialog box

3. Select gidNumber, and click OK.

4. Click OK.

5. Verify that the gidNumber schema object is added to the group class successfully.

When you click group in the navigation tree, gidNumber is displayed in the right pane,

as shown in Figure 2-43, which indicates that the schema object is added successfully. If

the schema object does not exist, add it again.

Figure 2-43 Verifying the result

Step 14 Choose File > Save.

Step 15 Click . The Console1 window is closed.





49

----End

Configuring User and User Group Account Mappings

This topic describes how to add user and user group account mappings from a UNIX-based

computer to a Windows-based computer.

Connecting to a Distinguished Name or Naming Context

To configure a default naming context and create a container to hold the account mappings

from Unix to Windows, proceed as follows:

Step 1 Choose Start > Administrative Tools > ADSI Edit.

The ADSI Edit window is displayed, as shown in Figure 2-44.

Figure 2-44 ADSI Edit window (1)

Step 2 In the navigation tree, right-click ADSI Edit, and choose Connect to from the shortcut menu.

The Connection Settings dialog box is displayed.

1. In the Connection Point area, click Select a well known Naming Context, and select Default naming context from the drop-down list box.

2. In the Computer area, click Select or type a domain or server: (Server | Domain [:port]), and enter localhost:389 in the text box, as shown in Figure 2-45.







50

Figure 2-45 Connection Settings dialog box

3. Click OK. The ADSI Edit window is displayed.

Step 3 In the navigation tree, click Default naming context and click to expand lower-level nodes, as shown in Figure 2-46.

Figure 2-46 ADSI Edit window (2)

Step 4 Right-click CN=nfsinstance,DC=Win-DRTVNVDH67M, and choose New > Object from the shortcut menu.

nfsinstance: AD LDS instance name.

Win-DRTVNVDH67M: computer name.





51

The Create Object dialog box is displayed, as shown in Figure 2-47.

Figure 2-47 Create Object dialog box

Step 5 In the Select a class list box, select container, and click Next.

The dialog box for setting the attribute value is displayed, as shown in Figure 2-48.





52

Figure 2-48 Setting the attribute value

Step 6 In the Value text box, enter Users, and click Next.

The value is the name of the container that stores user account mappings.


----End

Adding User Account Mappings

To create a user-class object in the CN=Users container to map the uidNumber, gidNumber,

and sAMAccountName attributes, proceed as follows:

Step 1 In the ADSI Edit window, choose Default naming context > CN=nfsinstance,DC=WIN-DRTVNVDH67M.

Step 2 Right-click CN=Users, and choose New > Object from the shortcut menu.






53


Step 3 In the Create Object dialog box, select user, and click Next.






54


Step 4 In the Value text box, enter the user name administrator, and click Next.

The user name is not associated with the Windows or UNIX user, and can be a random entry.

Step 5 Click More Attributes, and set uidNumber, gidNumber, sAMAccountName for this user account.

The uidNumber and gidNumber attributes indicate the user ID (UID) and group ID (GID) of the UNIX

user who is being mapped. The sAMAccountName value must match the name of a local user on the

Windows-based computer that is running Server for NFS. If uidNumber and gidNumber are not

displayed after you click More Attributes, restart the ADSI editor.

1. In the Select a property to view drop-down list box, select uidNumber. In the Attribute Values area, set Edit Attribute to 65534, as shown in Figure 2-51.





55

Figure 2-51 cn=uapnfs

If gidNumber and uidNumber are not displayed in the Select a property to view drop-down list box,

delete the CN=Users container and delete the default naming context that is created. Then refer to

Updating the Active Directory Schema to verify that the gidNumber and uidNumber schema objects

are added.

If the schema objects do not exist, add them again.

If the schema objects exist, repeat the preceding steps.

2. Click Set.

3. Set gidNumber and sAMAccountName in the same way as uidNumber.

Set the parameters as follows:

gidNumber: 65533

sAMAccountName: Administrator

4. Click OK. The Create Object dialog box is displayed.


----End





56

Adding Group Account Mappings

To create a group-class object in the CN=Users container to map the gidNumber and

sAMAccountName attributes, proceed as follows:

Step 1 In the ADSI Edit window, choose Default naming context > CN=nfsinstance,DC=WIN-DRTVNVDH67M.

Step 2 Right-click CN=Users, and choose New > Object from the shortcut menu.



Step 3 In the Select a class list box, select group, and click Next.






57


Step 4 In the Value text box, enter the group object name Administrators, and click Next.

Ensure that the group object name matches the name of the group account for which group account

mapping is desired.

Step 5 Click More Attributes, and set gidNumber and sAMAccountName for the group object Administrators.

The gidNumber attribute is the GID of the UNIX group that is being mapped. The sAMAccountName

value must match the name of a local group on the Windows-based computer that is running Server for

NFS. If gidNumber and sAMAccountName are not displayed after you click More Attributes, restart

the ADSI editor.

1. In the Select a property to view drop-down list box, select gidNumber. In the Attribute Values area, set Edit Attribute to 65533, as shown in Figure 2-54.





58

Figure 2-54 cn=Administrators

2. Click Set.

3. Set sAMAccountName to Administrators in the same way as gidNumber.

4. Click OK. The Create Object dialog box is displayed.


----End

Configuring AD LDS Object Properties

This topic describes how to grant read permission on AD LDS objects.

Procedure



Step 2 Run the following commands to grant read permission on AD LDS objects to the everyone user group:

cd C:\WINDOWS\ADAM

dsacls "\\localhost:389\CN=nfsinstance,DC=Win-DRTVNVDH67M" /G everyone:GR /I:T





59

//Note: (1) nfsinstance: AD LDS instance name. (2) Win-DRTVNVDH67M: computer name. (3)

389: LDAP port number, which is set in Figure 2-17 during the AD LDS instance installation.

For details about the AD LDS instance installation, see Installing AD LDS Instances.

The information shown in Figure 2-55 indicates that read permission is successfully granted.

Figure 2-55 Granting read permission

Step 3 Run the exit command to exit the CLI.

----End

Configuring the Mapping Source

This topic describes how to configure the mapping source. If the mapping source is not

configured, the NFS client fails to connect to the file server.

Procedure



Step 2 Run the nfsadmin mapping config adlookup=yes addomain=localhost:389 command to configure the mapping source.

The configuration result is displayed, as shown in Figure 2-56.





60

Figure 2-56 Configuring the mapping source

If the message "Failed to update the settings." is displayed, install Windows patches and run this

command again. For details on how to install Windows patches, see

http://support.microsoft.com/kb/2222746.



Step 3 Run the exit command to exit the CLI.

----End

2.1.4 Configuring an NFS Shared Folder

This topic describes how to configure an NFS shared folder on the file server.

Context

Performing NFS sharing for D:\fileserver on the NFS server is used as an example in this

topic.

Procedure

Step 1 Choose Start > Computer.

The Computer window is displayed.

Step 2 Create a fileserver folder in Local Disk (D:).

Step 3 Right-click fileserver, and choose Properties from the shortcut menu.

The fileserver Properties dialog box is displayed, as shown in Figure 2-57.





61

Figure 2-57 fileserver Properties dialog box

Step 4 Click the NFS Sharing tab, and click Manage NFS Sharing on the NFS Sharing tab page.

The NFS Advanced Sharing dialog box is displayed.

Step 5 Set NFS sharing parameters and permissions.

1. Set parameters based on Figure 2-58.

Figure 2-58 NFS Advanced Sharing dialog box

2. Click Permissions.

The NFS Share Permissions dialog box is displayed, as shown in Figure 2-59.





62

Figure 2-59 NFS Share Permissions dialog box

a. Select Read-Write from the Type of access drop-down list box.

b. Select the Allow root access check box.

c. Click OK. The NFS Advanced Sharing dialog box is displayed.

3. Click Apply, and click OK. The fileserver Properties dialog box is displayed.

4. Click Close.

Step 6 Right-click fileserver, and choose Share with > Specific people from the shortcut menu.

The File Sharing dialog box is displayed, as shown in Figure 2-60.

Figure 2-60 File Sharing dialog box

Step 7 In Choose people to share with, enter Everyone, and click Add.

Step 8 In the list box, click Everyone, and choose Read/Write from the shortcut menu.





63

Step 9 Click Share.

The message "Your folder is shared." is displayed.

Step 10 Click Done.

----End

2.2 Installing the NFS in the Windows Server 2003 Operating System

This topic describes how to install and configure the NFS in the Windows operating system.

2.2.1 Installation Preparations

You need to determine the installation environment and prepare files for the installation.

Procedure Installation Environment Requirements

1. Double-click My Computer.

2. Select the drive to be checked, right-click the selected drive, and choose Properties from the shortcut menu.

In the displayed Properties dialog box, check the file type of the drive, as shown

inFigure 2-61.





64

Figure 2-61 Properties dialog box

If the file system is not NTFS, reinstall the operating system.

Preparing Password and Group Files

1. Decompress software package. The Application Program package is obtained.

2. Decompress the Application Program package. The Linux_nfs_for_win2003 package is obtained.

3. Decompress the package to any path of the local disk. After decompression, passwd and group files are generated.

To prevent that the passwd and group files from being accidentally deleted, create a new

folder, for example, D:\passwd_group to save the files.

----End





65

2.2.2 Installation Procedure

This topic describes how to install the Windows Services for UNIX.

Procedure

Step 1 Download Windows Services for UNIX Version 3.5 on the official network of Microsoft to the local disk, for example, D:\.

Step 2 Double-click Windows Service for UNIX 3.5_en.exe. The dialog box shown in Figure 2-62 is displayed. Click Unzip to extract files.

Figure 2-62 Winzip Self-Extractor-Windows Service for UNIX 3.5_en.exe dialog box

Step 3 Click Close after decompression.

Step 4 Access the decompression folder and click setup.exe. The installation wizard dialog box is displayed.

Step 5 Click Next. The Customer Information dialog box is displayed.

Step 6 Enter the values in the user name (for example, aa) and Organization (for example, bb) text boxes. The License and Support Information page is displayed.

Step 7 Click I accept the agreement, as shown inFigure 2-63.





66

Figure 2-63 License and Support Information

Step 8 Click Next. The Setup dialog box is displayed.

Step 9 Select an installation mode. You are advised to use the customized installation mode.

Click Custom Installation, and then click Next.

Step 10 Select the items to be installed: Server for NFS and Server for NFS Authentication, as shown in Figure 2-64 and Figure 2-65 respectively.

Figure 2-64 Server for NFS

Figure 2-65 Server for NFS Authentication

The method of selecting the installation item is as follows: click the option and choose Entire feature

(including all subfeatures if any) will be installed on local hard drive from the shortcut menu.





67

The method of unselecting the installation item is as follows: click the option and choose Entire feature

will not be available from the shortcut menu.

Step 11 Click Next until the User Name Mapping page is displayed.

Step 12 Click Local User Name Mapping Server, and then click Password and group files. Click Next.

Step 13 Enter the paths where the passwd and group files are located in the Password file path and name and Group file path and name text boxes, as shown in Figure 2-66. Then click Next.

Figure 2-66 User Name Mapping

Step 14 Select the installation path. The default path is C:\SFU. Click Next to wait for the installation.


----End

2.2.3 Configuring Windows Services for UNIX

This topic describes how to configure the Windows Services for UNIX.

Procedure

Step 1 Choose Start > Programs > Services for UNIX Administration. The Services for UNIX Administration page is displayed.

Step 2 Double-click User Name Mapping, as shown in Figure 2-67.





68

Figure 2-67 User Name Mapping

Step 3 Click Maps. The Maps page is displayed, as shown in Figure 2-68.

Figure 2-68 Maps

Step 4 Configure the UID.

1. Click Show User Maps and expand User Maps.

2. Click List Windows Users and select Administrator in Windows Users, as shown in Figure 2-69.

Figure 2-69 Configuring User Maps





69

3. Click List UNIX Users and select nobody for Administrator in UNIX Users.

4. Click Add.

5. In the dialog box that is displayed, click OK.

Step 5 Configure the GID.

1. Click Show Group Maps and expand Group Maps.

2. Click List Windows Groups and select Administrator in Windows Groups, as shown in Figure 2-70.

Figure 2-70 Configuring Group Maps

3. Click List UNIX Groups and select nobody for Administrator in UNIX Groups.

4. Click Add.

5. In the dialog box that is displayed, click OK.

Step 6 Click Apply at the upper right corner of the page.

----End

2.2.4 Configuring a Shared Folder

This topic describes how to configure a shared folder.

Procedure

Step 1 Create a shared folder. The shared folder name is fileserver.

Step 2 Right-click fileserver and choose Properties from the shortcut menu that is displayed.

Step 3 Click the NFS Sharing tab in the displayed dialog box.

Step 4 Set parameters on the NFS Sharing tab page, as shown in Figure 2-71.





70

Figure 2-71 NFS Sharing

The parameters on the NFS Sharing tab page are described as follows:

Share name: indicates the shared folder name.

Anonymous UID/GID: indicates the anonymous UID or GID, which is used for NFS

connection authentication.

When the NFS is used for voice recording and playing services, setting the value of Anonymous

UID/GID is optional. By default, the system sets the values of Anonymous UID and Anonymous GID

to 65534 and 65533.

Step 5 Click Permissions and grant read and write permissions to the shared folder, as shown in Figure 2-72.





71

Figure 2-72 NFS Share Permissions

Step 6 Click OK and return to the Properties dialog box.

Step 7 Click OK.

----End

2.3 Configuring the NFS in the Linux Operating System

This topic describes how to configure the NFS in the Linux operating system.

2.3.1 Installing the NFS File Server

This topic describes how to install the NFS file server in the SuSE Linux 11 SP1 operating

system.

Procedure

Step 1 Insert the installation CD-ROM of the operating system into the CD-ROM drive.

Step 2 Enter yast2 in the command line window to enter the YaST control center.

Step 3 Click Network Services and double-click NFS Server on the displayed page.

A dialog box shown in Figure 2-73 is displayed.





72

Figure 2-73 Installing the NFS software

Step 4 Click Install.

After the installation is completed, the system displays the NFS Server Configuration dialog

box.

Step 5 In the NFS Server area, select Start, as shown in Figure 2-74.

Figure 2-74 NFS server settings

Step 6 Click Next.

The system displays the Directories to Export dialog box.





73


----End

2.3.2 Enabling an NFS Service

This topic describes how to enable an NFS service.

Procedure

Step 1 Log in as the root user.

Step 2 Disable the firewall.

1. Access the YaST control center.

2. Select Security and Users in the left area. Click the Firewal in the right area.

3. Select the Start-Up. Select the When Booting and Stop Firewall Now.

4. Save the configuration.

Step 3 Create a shared folder.

Assume that the shared folder fileserver is created in the root directory. Run the following

commands:

# cd /

# mkdir fileserver

Step 4 Grant the access permission to the shared folder.

1. Grant read and write permissions to the shared folder.

# chmod 777 /fileserver

2. Edit the exports file in /etc.

# vi /etc/exports //Open the exports file in /etc and make the file editable.

Run the following content in the exports file:

/fileserver 192.168.3.0/255.255.255.0(rw, all_squash, async, anonuid=65534,

anongid=65533)

According to the preceding information, 192.168.3.0/255.255.255.0 indicates that all

computers in the network segment 192.168.3. xxx are allowed to access fileserver.

3. Save the exports file and exit.

Press ESC and enter: wq to save the file and exit.

Step 5 Run the following commands to start the NFS service:

# cd /etc/init.d/

# ./nfsserver start

Figure 2-75describes the command output.

Figure 2-75 Starting the NFS service





74

Step 6 Check the NFS service status.

# ./nfsserver status

If the NFS service is in running state, it indicates that the NFS service is started normally, as

shown in Figure 2-76.

Figure 2-76 Checking the NFS service status

----End

2.3.3 Configuring a Shared Folder

This topic describes how to configure a shared folder.

Grant the read and write permissions on the note folder.

# chmod R 766 /fileserver

2.4 Configuring Data on the eSpace U1900 series

This topic describes how to configure data on the eSpace U1910.

Procedure Windows operating system

1. Log in to the LMT configuration guide.

For details, see LMT-based Login and Configuration.

2. Choose Service.

3. Click NFS Server.

The NFS Server page is displayed.

4. Set the parameters according to Figure 2-77.





75

Figure 2-77 Configuration result of the NFS board

5. Click Save.

6. Click Load Configuration.

Linux operating system

See LMT-based Login and Configuration to run the config add nfs type nfsno

nfsip remotedir / localdir [backupip ] command.

----End

2.5 Verifying the Configuration

This topic describes how to verify the configuration of the NFS server after it is installed.

Procedure Verify the NFS server configuration by using the LMT.

1. Run the show nfs type mrs command on the U1910 to view the NFS status. For details on how to run the command, see LMT-based Login and Configuration.

If STATUS is Connect as shown in Figure 2-78, the NFS is installed successfully.





76

Figure 2-78 NFS information

----End

1 Installing the eSpace Local Maintenance Terminal1.1 Installing the LMT1.1.1 Installation Preparations1.1.2 Installing the LMT Server1.1.3 Installing the LMT Client


2 Installing the File Server2.1 Installing the NFS Server in the Windows Server 2008 Operating System2.1.1 Checking the Installation Environment2.1.2 Installing the NFS Service2.1.3 Installing and Configuring the AD LDS2.1.4 Configuring an NFS Shared Folder

2.2 Installing the NFS in the Windows Server 2003 Operating System2.2.1 Installation Preparations2.2.2 Installation Procedure2.2.3 Configuring Windows Services for UNIX2.2.4 Configuring a Shared Folder

2.3 Configuring the NFS in the Linux Operating System2.3.1 Installing the NFS File Server2.3.2 Enabling an NFS Service2.3.3 Configuring a Shared Folder

2.4 Configuring Data on the eSpace U1900 series2.5 Verifying the Configuration

espace u1910 unified gateway v100r001c01spc600 software installation guide 06

Documents

huawei trademarks

huawei proprietary

lmt server

huawei industrial base

nfs server

installation environment

installation preparations

windows server