esd constant monitor system packaging bench set-up
TRANSCRIPT
plastic bag containing:
monitor to mat cord
ground cord for monitor
screws for remote jack and monitor
Monitor box containsMonitor
732 remote jack
manual
power supply
Mounting screws for 732 Remote
Mounting screwsfor monitor
Connector for Monitor to Ground and Monitor to Mat connections
Adhesive backed tie-downs and tie straps to dress wire
Some contents of Monitor box Plastic Bag
6580-01-283-99666580-01-283-9966
This product should be used for cleaning ESD Mat(Reconditions mat staticdisipative surface)
NOT PERMITTED IN STATICNOT PERMITTED IN STATICCONTROL AREASCONTROL AREAS
Styrofoam / Plastic CupsStyrofoam / Plastic Cups Polyethylene Envelopes, Sheets, Bags etc..Polyethylene Envelopes, Sheets, Bags etc.. Common Bubble-Pack and PackagingCommon Bubble-Pack and Packaging
FoamFoam Scotch TapeScotch Tape Rubber PadsRubber Pads Plastic Tote BoxesPlastic Tote Boxes Unnecessary Insulating Materials inUnnecessary Insulating Materials in
GeneralGeneral
1350-01-264-68981350-01-264-6898
Used to wipe down prime generators that must be used in ESD Safe Areas
732 Remote
AC Adapter
Static Dissipative Mat
Ground
Ground
Monitor
Ground
Ground
Monitor
732 Remote
AC Adapter
ESD MatStatic
Dissipative
To prevent a false positive
indication do not connect these grounds
together(use same ground but
different locations)
Hook ESD Constant Monitor as shown in the above block diagram
Remove rubber feet from bottom of mat if the mat bows due to heavy items on mat
Use a non metallic tool such as a Spudger
“WP” Norris 2M Project Offi ce2M Project Offi ce Code 6083 Bldg 3241Code 6083 Bldg 3241
(812) 854- 3192 FAX: 854- 3855(812) 854- 3192 FAX: 854- 3855 [email protected][email protected]