erouting eigrp pt practice sba.docx
TRANSCRIPT
ERouting EIGRP PT Practice SBA
A few things to keep in mind while completing this activity:
1. Do not use the browser Back button or close or reload any Exam windows during the exam.
2. Do not close Packet Tracer when you are done. It will close automatically.
3. Click the Submit Assessment button to submit your work.
IntroductionIn this Packet Tracer Practice Skills-based Assessment, you will:
complete the configuration of a partially configured network
establish connectivity to the West Region and the Internet through the use of static and dynamic routing
verify connectivity
Addressing Table
Device Interface Address Subnet Mask Default Gateway
EastHQ
S0/0/0 192.168.1.249 255.255.255.252 N/A
S0/0/1 192.168.1.253 255.255.255.252 N/A
S0/1/0 209.165.201.6 255.255.255.252 N/A
S0/1/1 192.0.2.2 255.255.255.252 N/A
E-Branch1
Fa0/0 192.168.0.1 255.255.255.128 N/A
Fa0/1 192.168.0.129 255.255.255.128 N/A
S0/0/0 192.168.1.250 255.255.255.252 N/A
S0/0/1 192.168.1.245 255.255.255.252 N/A
E-Branch2 Fa0/0 192.168.1.1 255.255.255.192 N/A
Fa0/1 192.168.1.65 255.255.255.192 N/A
S0/0/0 192.168.1.254 255.255.255.252 N/A
S0/0/1 192.168.1.246 255.255.255.252 N/A
EPC1 NIC 192.168.0.2 255.255.255.128 192.168.0.1
EPC2 NIC 192.168.0.254 255.255.255.128 192.168.0.129
EPC3 NIC 192.168.1.2 255.255.255.192 192.168.1.1
EPC4 NIC 192.168.1.126 255.255.255.192 192.168.1.65
NetAdmin NIC 192.168.1.66 255.255.255.192 192.168.1.65
Note: The password for user EXEC mode is cisco. The password for privileged EXEC mode is class.
Step 1: Configure the Device Basics.
Note: Initially, you can only access router E-Branch2 through the console connection on NetAdmin.
a. Configure the following on E-Branch2:
The router name is EB2.
The privileged EXEC mode uses the following encrypted password: class.
Enable Telnet and console line logins and use the following password: cisco.
Configure the banner message-of-the-day as Authorized access only!
b. Using the Addressing Table, configure and activate all the necessary interfaces on E-Branch2.
c. Configure correct host IP addressing.
Configure EPC2 with the last IP address in the subnet.
Configure EPC4 with the last IP address in the subnet.
Step 2: Discover the Network.
a. Explore the network to determine the IP address of the serial interface that EastHQ uses to connect to E-Branch2.
b. Remotely access EastHQ.
Step 3: Configure Static and Default Routing.
a. Configure connectivity to the West Region.
Configure a static route on EastHQ to the entire West Region. The West Region uses the 172.16.100.0/24 address space. Use the next-hop address argument.
Configure a default route on EastHQ to send to the Internet all other traffic for destinations that are not found in the EastHQ routing table. Use the exit interface argument.
b. Verify static and default routing.
Step 4: Configure EIGRP Routing.
Configure EIGRP on EastHQ, E-Branch1, and E-Branch2.
a. Use AS number 100.
b. Do not advertise the network between EastHQ and the Internet.
c. Do not advertise the network between EastHQ and the West Region.
d. Advertise all other attached networks.
e. Disable automatic summarization.
f. Disable EIGRP updates out interfaces where there are no EIGRP neighbors available.
g. On EastHQ, enter the one command in the EIGRP routing process that will propagate the default and static routes to E-Branch1 and E-Branch2.
Step 5: Modify the default EIGRP operation.
a. Configure the link between EastHQ and E-Branch2 so that the correct bandwidth of 384 k/s is used in EIGRP calculations.
b. Configure E-Branch1 to advertise a summary route for the subnets 192.168.0.0/25 and 192.168.0.128/25 to EastHQ and E-Branch2.
c. Configure E-Branch2 to advertise a summary route for the subnets 192.168.1.0/26 and 192.168.1.64/26 to EastHQ and E-Branch1.
Step 6: Verify Full Connectivity.
Although these are not scored, the following connectivity tests should be successful.
Test connectivity to the West Region.
Test connectivity to the Internet.
General Information
Assessment = ERouting PT Practice SBA EIGRPForm = FormB ERouting EIGRP PT Practice SBA User ID = 8066865Scored Date = Sun Feb 10 18:34:35 GMT+00:00 2013
The time shown is Greenwich Mean Time (GMT). Subtract or add the appropriate number of hours to adjust to your local time. If you do not know the correct number of hours to adjust to GMT, visit http://www.timeanddate.com/worldclock/search.html.
Feedback
Based on your performance on this assessment, this table reports your preparedness for taking a hands-on skills exam covering similar networking skills. The estimates are based on expert opinion of the knowledge and skills needed to successfully perform these networking tasks on a repeatable basis.
Performance Components
Proficiency Estimates
None
Novice Partial Proficient
Basic Device Configuration
IP Address Configuration
Static and Default Route Configuration
Basic EIGRP Configuration
EIGRP Modification
Default Route Propagation
See Terminology section for an explanation of terms.
The following feedback summarizes why you received less than proficient on any of the estimates:
Although you correctly configured both routers with summary routes, you did not correctly modify the default bandwidth.
Scoring
Total Points Possible = 100 Total Earned Points = 96
Performance Component: Basic Device Configuration
Description: The student can perform host and basic IOS device configurations including naming, security (passwords and banner motd), and interface addressing and activation.Maximum Points = 20 Earned Points = 20
Work Product Feature Student Result Points
Basic Device Configuration 20
E-Branch2 Hostname 1
Network:E-Branch2:Host Name Correct
E-Branch2 Banner 2
Network:E-Branch2:Banner motd Correct
E-Branch2 Enable Secret 2
Network:E-Branch2:Enable Secret Correct
E-Branch2 Console Password 2
Network:E-Branch2:Console Line:Password Correct
Network:E-Branch2:Console Line:Login Correct
E-Branch2 VTY Password 1
Network:E-Branch2:VTY Lines:0:Password Correct
E-Branch2 Fa0/0 Addressing 3
Network:E-Branch2:Ports:FastEthernet0/0:IP Address Correct
Network:E-Branch2:Ports:FastEthernet0/0:Subnet Mask Correct
Network:E-Branch2:Ports:FastEthernet0/0:Power Correct
E-Branch2 Fa0/1 Addressing 3
Network:E-Branch2:Ports:FastEthernet0/1:IP Address Correct
Network:E-Branch2:Ports:FastEthernet0/1:Subnet Mask Correct
Network:E-Branch2:Ports:FastEthernet0/1:Power Correct
E-Branch2 S0/0/0 Addressing 3
Network:E-Branch2:Ports:Serial0/0/0:IP Address Correct
Network:E-Branch2:Ports:Serial0/0/0:Subnet Mask Correct
Network:E-Branch2:Ports:Serial0/0/0:Power Correct
E-Branch2 S0/0/1 Addressing 3
Network:E-Branch2:Ports:Serial0/0/1:IP Address Correct
Network:E-Branch2:Ports:Serial0/0/1:Subnet Mask Correct
Network:E-Branch2:Ports:Serial0/0/1:Power Correct
Performance Component: IP Address Configuration
Description: The student can assign valid IP addresses from his or her subnetting scheme to hosts and networking devices.Maximum Points = 10 Earned Points = 10
Work Product Feature Student Result Points
IP Address Configuration 10
EPC2 Addressing 5
Network:EPC2:Ports:FastEthernet:IP Address Correct
Network:EPC2:Ports:FastEthernet:Subnet Mask Correct
Network:EPC2:Default Gateway Correct
EPC4 Addressing 5
Network:EPC4:Ports:FastEthernet:IP Address Correct
Network:EPC4:Ports:FastEthernet:Subnet Mask Correct
Network:EPC4:Default Gateway Correct
Performance Component: Static and Default Route Configuration
Description: The student can configure static and default routes. Maximum Points = 20 Earned Points = 20
Work Product Feature Student Result Points
Static and Default Route Configuration 20
Static Route on EastHQ to West Region 12
Network:EastHQ:Routes:Static RoutesV2:172.16.100.0-24-192.0.2.1-0-1 Correct
Default Route on EastHQ to Internet 8
Network:EastHQ:Routes:Static RoutesV2:0.0.0.0-0-Serial0/1/0-0-1 Correct
Performance Component: Basic EIGRP Configuration
Description: The student can configure EIGRP. Maximum Points = 20 Earned Points = 20
Work Product Feature Student Result Points
Basic EIGRP Configuration 20
EIGRP Routing Network Statements 9
Network:EastHQ:EIGRP:100:Networks:192.168.1.248 0.0.0.3 Correct
Network:EastHQ:EIGRP:100:Networks:192.168.1.252 0.0.0.3 Correct
Network:E-Branch1:EIGRP:100:Networks:192.168.0.0 0.0.0.127 Correct
Network:E-Branch1:EIGRP:100:Networks:192.168.0.128 0.0.0.127 Correct
Network:E-Branch1:EIGRP:100:Networks:192.168.1.248 0.0.0.3 Correct
Network:E-Branch1:EIGRP:100:Networks:192.168.1.244 0.0.0.3 Correct
Network:E-Branch2:EIGRP:100:Networks:192.168.1.0 0.0.0.63 Correct
Network:E-Branch2:EIGRP:100:Networks:192.168.1.64 0.0.0.63 Correct
Network:E-Branch2:EIGRP:100:Networks:192.168.1.252 0.0.0.3 Correct
Network:E-Branch2:EIGRP:100:Networks:192.168.1.244 0.0.0.3 Correct
EIGRP Routing Autosummarization Statements 7
Network:EastHQ:EIGRP:100:Auto Summary Correct
Network:E-Branch1:EIGRP:100:Auto Summary Correct
Network:E-Branch2:EIGRP:100:Auto Summary Correct
EIGRP Routing Passive Interface Statements 4
Network:E-Branch1:EIGRP:100:Passive Interface:FastEthernet0/0 Correct
Network:E-Branch1:EIGRP:100:Passive Interface:FastEthernet0/1 Correct
Network:E-Branch2:EIGRP:100:Passive Interface:FastEthernet0/0 Correct
Network:E-Branch2:EIGRP:100:Passive Interface:FastEthernet0/1 Correct
Performance Component: EIGRP Modification
Description: The student can modify the default bandwidth that is used by EIGRP in route calculation. The student can manually summarize EIGRP routes to reduce the size of routing tables. Maximum Points = 24 Earned Points = 20
Work Product Feature Student Result Points
EIGRP Modification 20
Bandwidth Configuration 0
Network:EastHQ:Ports:Serial0/0/1:Bandwidth Info Correct
Network:E-Branch2:Ports:Serial0/0/0:Bandwidth Info Incorrect
E-Branch1 Summary Routes 10
Network:E-Branch1:Ports:Serial0/0/0:EIGRP Summary Addresses:100:192.168.0.0 255.255.255.0 5 Correct
Network:E-Branch1:Ports:Serial0/0/1:EIGRP Summary Addresses:100:192.168.0.0 255.255.255.0 5 Correct
E-Branch2 Summary Routes 10
Network:E-Branch2:Ports:Serial0/0/0:EIGRP Summary Addresses:100:192.168.1.0 255.255.255.128 5 Correct
Network:E-Branch2:Ports:Serial0/0/1:EIGRP Summary Addresses:100:192.168.1.0 255.255.255.128 5 Correct
Performance Component: Default Route Propagation
Description: The student can propagate a default route in EIGRP.Maximum Points = 6 Earned Points = 6
Work Product Feature Student Result Points
Default Route Propagation 6
EastHQ redistribute static Command 6
Network:EastHQ:EIGRP:100:Redistribution:Static Correct
Terminology
Performance Component - a description of what the student knows and can do about a coherent set of networking knowledge and skills; the level at which the student's work product can be assigned a proficiency estimate.
Proficiency Estimate - a description of a student's level of mastery of the performance component. The proficiency estimate is not meant to be a comprehensive statement of what the student knows and can do.
Work Product - student performance recorded during this assessment. For example, the submitted activity file, timing statistics, and final running configurations.
Work Product Feature - An aspect of the student's work product. The feature can have a name and a value. For example, Name = FastEthernet0/0:IP Address; Value = 192.168.1.1
Individual work product features are combined into performance components and scored based on the complexity of the performance observed. Because the construction of performance components is based on the underlying work product features as well as the unique design of each scenario, strict boundaries for determining a proficiency rating are not possible. In general:
None - 0% to 25% of possible points Novice - 26% to 50% of possible points Partial - 51% to 85% of possible points Proficient - 86% to 100% of possible points