ericsson tools catalogue

59
Telecom Global Installation Products

Upload: greg-morris

Post on 22-Jun-2015

496 views

Category:

Documents


34 download

TRANSCRIPT

Page 1: Ericsson Tools Catalogue

Telecom

Global Installation Products

Page 2: Ericsson Tools Catalogue

Global Installation ProductsIntroduction; The intended readers of this catalogue are Product management, Supply management, Key account management, Design organi-sation and personal at the market units within Ericsson companies and their customers.

The catalogue shall also be seen as market material to be presen-ted by Ericsson to customers.

Products are present in the Variant Configuration (VC)and in the Ericsson Configuration Portfolio (ECP).

General quality and durability of the products;All products in the portfolio are selected and handpicked among leading manufacturers or specially produced with the aim to secure a long lasting durability of the installation, the function of the net-work and consequently saving cost for the operator avoiding re-visits to the site.

Installation management;The catalogue displays the products as stand alone units but they are a part of an optimised installation system described in the Stan-dard Module Overview (SMO) that should be consulted for the full context.

Ordering management;The catalogue includes a variety of timesaving pre-assembled kit’s that includes all materials to install a function in one order line. All ordering are handled by Ericsson using the product numbers in the catalogue.

Page 3: Ericsson Tools Catalogue

Telecom 2010

INSTALLATION MATERIAL ....................................................................2Site Installation kit, Outdoor .................................................................2Cable ladders Outdoor .........................................................................3Site Installation kit, Indoor ....................................................................3Cable ladders, Indoor ...........................................................................4Cable Tray Indoor ................................................................................519" Rack frames and accessories .......................................................6Cable duct ............................................................................................7Cable sealing .......................................................................................9Cable Accessories .............................................................................11Grounding material ............................................................................12Grounding material other ...................................................................16Adjustable platform material-civil works .............................................17Antenna support material ...................................................................18Common fastening material ...............................................................22Miscellaneous installation material ....................................................23

OPTICAL INTERFACE LINK, RRU ........................................................26Main-Remote Systems .......................................................................26Fiberoptic Cable Assemblies .............................................................29

TOOLS ....................................................................................................30Tool sets ............................................................................................30Torque wrench tools ..........................................................................33Crimping tools ....................................................................................34Connector and cable tools .................................................................35Power tools ........................................................................................36Special Tools .....................................................................................36Compasses ........................................................................................37RBS Installation and test ....................................................................37Safety Equipment ...............................................................................38Lifting Equipment ...............................................................................39Miscellaneous Equipment ..................................................................40

SITE FEEDER SYSTEM .........................................................................41RFA Feeder system products, Draka .................................................41LDF-AVA Feeder system products, Andrew ......................................421/2" Jumper Cable FSJ4 (Angled), indoor and outdoor use ..............441/2" Jumper Cable FSJ4 (Straight) indoor and outdoor use ..............441/4" Jumper Cable FSJ1 (Angled), indoor and outdoor use ..............45Jumper Cable .....................................................................................45Feeder system accessories ...............................................................46Feeder clamps ...................................................................................47Feeder grounding ...............................................................................48

DISTRIBUTION FRAME .........................................................................49OVP-PCM-module kit for RBS2106 ...................................................49

POWER BACK-UP .................................................................................50Battery 2106I ......................................................................................50Battery 2106V3 ..................................................................................50Battery 6/BKC 901 06/0098 ...............................................................51Battery 6/BKC 901 060/100 ...............................................................53Battery Unit, BU 2U-01 ......................................................................54

11

Page 4: Ericsson Tools Catalogue

INSTALLATION MATERIALstallation material

Site Installation kit, Outdoor

Greenfield site towerThis kit is designed for a Greenfield Tower site. It is a complete solution of installation material for the outdoor site. The cable runs, grounding wire, grounding rods, grounding bar and installation instructions are delivered in a transport optimized export package.

Roof top siteThis cable ladder set total lenght 9 meter is used on a roof top site to carry cables between the antennasupport and the RBS cabinet/shelter. The set is supplied with jointing and fastening material as well as grounding screw.

42Standard Installation Material Overview

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3501/1 2310 480 540 95.23

Consists of:

Description Qty Description QtyCable ladder kit. 2x2.25m AluZinc 1 Basic wire kit, 70m, 35mm² 1Cable ladder cover kit, 2x1.125m, AluZinc 1 Rod kit, 3m 1Wire kit, 40m 35mm² 1 Installation instruction 1Outdoor ground bar 1 Standard site material description 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3606/1 2250 330 220 20.50

Consists of:

Description Qty Description QtyCable ladder, 2.25m (W=300mm), AluZinc 4 Joint 8End stop 4 L-T-X branch 1Universal ladder fixture 4 Screw/plug set (5pcs) 1Angle brackets 10 Grounding screw, M8x16 2Bolt kit, M8x16 (25pcs) 1 Tie strap set, 457x64mm, (50pcs) 1

22

Page 5: Ericsson Tools Catalogue

INSTALLATION MATERIAL

Cable ladders Outdoor

Cable ladder kit, AluZinc coatedThe outdoor Cable Run carries cables between the base station shelter and the tower, mast or antenna sup-port. Used on green field sites each set carries 4,5 meter of cable ladders. The Cable Run set is designed as a modular and flexible cable carrying system and it is designed for free standing.

Cable ladder cover kit, 2x1.125 m, AluZinc coatedThe cover set protects the cable run between the mast and the base station. It avoids falling ice, smaller sto-nes as well as sunlight damaging the feeder cables.

Consists of:

Site Installation kit, Indoor

Basic ladder kit SmallThese kit is designed for a RBS room.Basic Indoor Kits is a complete solution of installation material for theindoor site and can be odered in different sizes.Cable ladders and cable tray, grounding systems, marking and sealing material are delivered in a optimized export package.

Basic ladder kit Medium

Basic ladder kit Large

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3138/1 2250 4150 80 22.00Consists of:

Description Qty Description QtyCable ladder 2.25m (W=400mm) AluZinc 2 Installation bolt set (25pcs) 1Universal ladder fixture 2 Joint 4Angle bracket 6 Screw set with plugs 1End stop 2

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3159/1 1130 390 245 16.60

Description QtyProtection cover (W=400mm) 2bolt set 14 pcs 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3416/1 2300 470 500 33,20

Consist of:

Description Qty Description QtyCable ladder kit, Grey, 2x2,25m (W=300mm) 1 Cable kit2m, 35mm², Yellow/Green 2Cable tray, Grey, 2x0,6m, (W=150mm) 1 Common installation material 1Cable sealing kit for 1/4"-7/8" cable 1 Site material description 1Grounding cable 12m, 35mm², Yellow/Green 1 Indoor cable trunk, 2x2m 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3416/2 2300 470 500 57,15

Consists of:

Description Qty Description QtyCable ladder kit, Grey, 2x2.25m (W=300mm) 2 Cable kit 2m, 35mm², Yellow/Green 3Cable profile, Grey, 2x0.6m 2 Common installation material 1Cable sealing kit, for 1/4" - 7/8" cable 1 Site material description 1Grounding cable 17m, 35mm², Yellow/Green 1 Indoor cable trunk 2x2m 2

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3416/3 2300 470 500 80,25

Consist of:

Description Qty Description QtyCable ladderkit, Grey, 2x2,25m (W=300mm) 3 Cable kit 2m, 35mm², Yellow/Green 4Cable tray, Grey, 2x0,6m, (W=150mm) 2 Common installation material 1Cable sealing kit for 1/4"-7/8" cable 1 Site material description 1Groundingcable 22m, 35mm², Yellow/Green 1 Indoor cable trunk, 2x2m 3

33

Page 6: Ericsson Tools Catalogue

INSTALLATION MATERIAL

Cable ladders, Indoor

Cable ladder kit, sendzimir coated 300 mmThis indoor cable run is designed for mount in ceiling or on wall. The length 2.25 meter, renders possible usage in buildings with narrow entrance, e.g. elevators. To obtain desired cable ladder length; use several NTM 201 3160/1,NTM 201 3160/2 or NTM 201 13745/1.The width of cable ladder is 300 mm.

Cable ladder kit, Paint coated 300 mm

Cable ladder kit, Paint coated 400 mm This indoor cable run is designed for mount in ceiling or on wall. The length, 2.25meter, renders possible usage in buildings with narrow entrance, e.g. elevators. Toobtain desired length of cable ladder: use several NTM 201 3745/1.

AccessoriesT-Bolt kit Spare T-bolt for mounting additional accessories on the pendant/channel rail of the indoor cable ladder sys-tem.

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3160/1 2250 320 120 16

Consists of:

Description Qty Description QtyCable ladder, Length 2250mm Width 300mm 2 Supporting Iron 3Joint 4 T-bolt M10x35 3Universal ladder fixture 4 Pendant bracket 3Angle bracket 6 Bolt set M8x16 25-pack 1Pendant rail 2250mm 1 Grounding screw Ø=9mm, 35mm² 2Ceiling fixing 2 Screw and plug set 5pcs 2Cantilever arm 3

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3160/2 2260 325 85 18.50

Consists of:

Description Qty Description QtyCable ladder, Length 2250mm Width 300mm 2 Supporting Iron 3Joint 4 T-bolt M10x35 3Universal ladder fixture 4 Pendant bracket 3Angle bracket 6 Bolt set M8x16 25-pack 1Pendant rail 2250mm 1 Grounding screw Ø=9mm, 35mm² 2Ceiling fixing 2 Screw set with plugs 5-pack M8x65 mm 2Cantilever arm 3

Product Number Length mm Width mm Height mm Weight kgsNTM 201 37451 2250 425 140 21.50

Consists of:

Description Qty Description QtyCable ladder, Length 2250mm Width 400mm 2 Supporting Iron 3Joint 4 T-bolt M10x35 3Universal ladder fixture 4 Pendant bracket 3Angle bracket 6 Bolt set M8x16 25-pack 1Pendant rail 2250mm 2 Grounding screw Ø=9mm, 35mm² 2Ceiling fixing 3 Screw set with plugs 5-pack M8x65 mm 2Cantilever arm 3L-T-X branch 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3888/1 200 150 50 0,9

Consist of:

Description QtyT-bolt 20

44

Page 7: Ericsson Tools Catalogue

INSTALLATION MATERIAL

5

Cable Tray Indoor

Cable Tray kit 2x2 m, Paint coated, GreyThe cable try carries and covers cable inside a RBS-room or RBS-shelter. widht=0,1 m

Cable Tray, 2x0.6 m, Paint coated, GreyThis product is mounted on the wall and used to lead cables down from the cable run to the RBS cabi-net,widht =0,15m

Consists of:

Cable Tray, 2x2 m, Paint coated, GreyThe Cable Tray kit is a complement to the traditional Cable Ladder kit and is suitable for cable runs in close installation environment. It can be mounted on to vertical walls as well as on to horizontal ceiling. Cables are fixed to the Cable Tray with traditional tie straps. Widht=0,2m

Consists of:

Product Number Length mm Width mm Height mm Weight kgsSXK 107 2023/1 2010 110 70 9.10

Consist of

Description Qty

Cable ladder profile, 2000x100mm 2Cable ladder profile cover, 2000x100mm 2Profile End Piecs 2Assembly Screw, B8 40

Product Number Length mm Width mm Height mm Weight kgsSXK 107 2158/2 620 160 25 2.20

Description QtyFitting profile, 600x150x14 mm 2Screw and plug set, 4,5x50 mm 4-pack 2Grounding screw, M6x12mm, Ø = 9mm 4

Product Number Length mm Width mm Height mm Weight kgsSXK 107 761/2 2002 202 25 8.50

Description QtyFitting profile, 2000x200x14mm 2Screw and plug set, 4,5x50 4-pack 2Grounding Screw, M6x12mm, Ø=9mm 4

5

Page 8: Ericsson Tools Catalogue

INSTALLATION MATERIAL

19" Rack frames and accessories

Battery shelf set, Paint coated, GreyBattery shelf set for floor mounted 19" Rack frame. Two shelves hold totally 300 kg. Note,Rack frame NTM 201 3604/2 must be ordered separately.

Shelf set, Paint coated, GreyShelf set for 19" Rack . Two shelves hold totally 30 Kg.

Consists of:

Rack frame 50U, Paint coated, Grey19" Rack Frame can house RBS equipment such as power, batteries, transmission, MUfor main remote DF-OVP, connection modules etc.The 19" Rack System is applicable on other areas as well, due to flexibility and expandability.The 19" Rack Frame is floor mounted and secured to the wall. The wall distance mounted is 420 mm and height is 2221 mm (50U).

Rack frame 16U, Paintcoated, GreyA 19" standard rack according to IEC 297 intended for mounting on wall, delivered with 4 support bars. Rack height is 714 mm (16U) and wall distance 420 mm.

Cross connection setThe Cross Connection unit is a for indoor 19" rack. It can hold totally 20x10-pair terminal blocks.

Consists of:

Product Number Length mm Width mm Height mm Weight kgsSXK 107 2024/1 720 500 100 10.10

Consist ofDescription Qty19" Batteryshelf, Depth 350mm, u-rights 16 U 2Cross bars 2Assembly screw/nut M6x12mm 20

Product Number Length mm Width mm Height mm Weight kgsSXK 107 2025/1 330 480 90 4.00

Description Qty19" Basic shelf, Depth 350mm 2Rack screw/nut set, M6x12mm (10pcs) 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3604/2 2235 100 100 9.30

Consists of:

Description Qty Description QtyUprights 50 U 2 Assembly screw/nut set, M6x12mm (20pcs) 1Wall brackets 4 Wall screw/plug set (5pcs) 2Cross bars 3 Grounding screw 2Rack screw/nut set, M6x12mm (10pcs) 2

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3605/1 715 105 60 5.10

Consists of:

Description Qty Description QtyUprights 16 Unit 2 Assembly screw/nut set, M6x12mm (20pcs) 1Wall brackets 4 Wall screw/plug set (5pcs) 2Cross bars 2 Grounding screw 1Rack screw/nut set, M6x12mm (10pcs) 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3607/1 600 140 50 0.90

Description Qty19" Mounting frame 1Terminal block (10-pair) Slotted connections 5Rack screw/nut set, M6x12mm (10pcs) 1

66

Page 9: Ericsson Tools Catalogue

INSTALLATION MATERIAL

Cable duct

Basic cable duct kit, 12 mThis cable duct made of recycled rubber can carry up to 4pcs of 7/8 feeder cables and does not require any mechanical fixing to the surface. Each duct is simply laid on a flat surface to be connected to the next one, creating a feeder cable infrastructure on a rooftop site without penetrating the roof surface.

Cable duct 1 m, 4x7/8"The Cable Duct carries RF feeder and grounding wire between the RBS cabinet and the antenna pole. Up to four 7/8" feeders and two grounding wires can be located within the duct. The Cable duct does not need to be secured on a flat roof top site, due to the weight.

Cover kit 10 m, 4x7/8"The duct covers protects the cable against mechanical influence such as water, sunlight snow and sand.

E69 957 80

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3469/1 1020 600 670 206.00

Consists of:

Description Qty Description QtyCable Duct, Straight 10 Grounding bar 1Cable Duct, Straight with grounding space 1 Grounding Bolt Set, (10pcs) 1Cable Duct, Straight with ground bar 1 Jointing Tube Set, (30pcs) 1Cable Duct, Cover 2 Clamp Set, (100 pcs) 1Cover Screw Set (20pcs) 1

Product Number Length mm Width mm Height mm Weight kgsSXK 107 413/1 1000 300 90 17.00

Consists of:

Description QtyCable Duct, Straight 1Jointing Tube Set, (4pcs) 1Clamp set (15pcs) 1

Product Number Length mm Width mm Height mm Weight kgsSXK 107 419/1 1000 320 20 6.00

Consists of:

Description QtyCable Duct, Cover 10Screw Set (100pcs) 1

77

Page 10: Ericsson Tools Catalogue

INSTALLATION MATERIAL

Cable duct 1 m grounding, 4x7/8"Cable Duct with room for grounding equipment and grounding wires, which can be connected to the groun-ding bar.

Cable duct 1 m open, 4x7/8"A Cable Duct with room for feeder grounding and branching of cable. If the long side of the duct is sawed up, it can even be used as T-branch.

Consists of:

Bend duct 90°, 4x7/8"This duct changes the direction of the cable duct on a roof top site.The angle of the bend can either be 45° or 90°.

Consists of:

Cable duct T-junction, 4x7/8"Use the T-Junction cable duct to split feeder cable in different directions on roof top sites.

Consists of:

Keyhole saw, 230 V ACThis power saw uses a double blade system to cut through walls of rubber cable ducts. It is supplied with hard metal blades and the supply voltage is 230 V. Lock off switch and blade brake for added security.

Consists of:

Product Number Length mm Width mm Height mm Weight kgsSXK 107 420/1 1000 320 110 22.20

Consists of:

Description Qty Description QtyCable Duct, Straight with grounding bar 1 Grounding Bolt Set ( 10pcs) 1Cable Duct Cover 1 Jointing Tube Set (4pcs) 1Cover Screw Set (10pcs) 1 Clamps Set ( 10pcs) 1Grounding Bar 1

Product Number Length mm Width mm Height mm Weight kgsSXK 107 421/1 1000 320 110 19.00

Description QtyCable Duct, Straight with grounding space 1Cable Duct Cover 1Cover Screw Set (10pcs) 1Jointing Tube Set (4pcs) 1Clamps Set (10pcs) 1

Product Number Length mm Width mm Height mm Weight kgsSXK 107 422/1 300 300 220 20.00

Description QtyCable Duct Bend 45° 2Cable Duct Cover 45° 2Cover Screw Set, (10pcs) 1Jointing Tube Set, (4pcs) 1

Product Number Length mm Width mm Height mm Weight kgsSXK 107 423/1 840 580 110 25.00

Description QtyT-Junction Cable Duct 1T-Junction Cover 1Cover Screw Set, (10pcs) 1Jointing Tube Set, (4Pcs) 1

Product Number Length mm Width mm Height mm Weight kgsLTT 601 152/1 380 360 110 4.50

Description QtyPower aligator saw 220 V 1Blade for normal usage 2Blade, thinn edge 2

88

Page 11: Ericsson Tools Catalogue

INSTALLATION MATERIAL

Cable sealing

ComPlus 6x1, 1/4" - 7/8"The Roxtec ComPlus frame is a lightweight composite frame. The frame consists of sections put together as one single frame with 1 opening. The frame has integrated knockout cover that are easily removed before routing cables. The 6 smaller modules fit cables from dimensions from 1/4" up to 1/2". The 12 larger modules fit cables from 3/8" up to 7/8". One single multidiame-ter module can seal cables of several different diameters, simply by peeling layers away from the module halves until a perfect achieved.Fits indoor and outdoor installations. According to IP54/ Firestop.

Consists of:

ComPlus 6x2, 1/4" - 7/8"The Roxtec ComPlus frame is a lightweight composite frame. The frame consists of sections put together as one frame with 2 openings in width. The frame has integrated knock-out covers that are easily removed before routing cables. The 3 smaller module fits cables with dimensions from 1/4" up to 1/2". The larger module fits cables with dimensions from 3/8 " up to 7/8". One single multidiameter module can seal cables of several different diame-ters, simply by peeling layers away from the module halves until a perfect achieved.Fits indoor and outdoor installations. According to IP54/ Firestop.Possible to compliment with two extra module sets if needed.

Consists of:

ComPlus 6x3, 1/4" - 7/8"The Roxtec ComPlus frame is a lightweight composite frame. The frame consists of sections put together as one frame with 3 openings in width. The frame has integrated knock-out covers that are easily removed before routing cables. The 3 smaller modules fits feeder cables with dimensions from 1/4" up to 1/2". The 12 larger module fits with dimensions from 3/8 "up to 7/8". One single multidiameter module can seal cables of several different diame-ters, simply by peeling layers away from the module halves until a perfect achieved. Fits indoor and outdoor installations. According to IP54/Firestop. Possible to compliment with two extra module sets if needed.

Consists of:

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3448/1 380 270 160 5.60

Description QtySide section composite frame 2Module set 1/4" - 7/8" 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3448/2 300 250 250 6.50

Description QtySide section composite frame 2Mid section composite frame 1Module set 1/4" - 7/8" 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3448/3 300 250 250 7.70

Description QtySide section composite frame 2Mid section composite frame 2Module set 1/4 - 7/8" 1

99

Page 12: Ericsson Tools Catalogue

INSTALLATION MATERIALComplus 6x1, 7/8" - 1 5/8"The Roxtec ComPlus frame is a lightweight composite frame. The frame consists of sections put together as one single frame with 1 opening. The frame has integrated knockout covers that are easily removed before routing cables. The 6 modules fits cables with dimensions from 7/8" up to 1 - 5/8". One single multidiameter module can seal cables of several different diameters, simply by peeling layers away from the module halves until a perfect fit is achieved. Fits indoor and outdoor installations. According to IP54/ Firestop.

Consists of:

ComPlus 6x2, 7/8" - 1 5/8"The Roxtec ComPlus frame is a lightweight composite frame. The frame consists of sections put together as one frame with 2 openings in width. The frame has integrated knock-out covers that are easily removed before routing cables. The 6 modules fit cable with dimensions from 7/8" to 1 - 5/8". One single multidiameter module can seal cables of several different diameters, simply by peeling layers away from the module halves until a perfect fit is achieved. Fits indoor and outdoor installations. According to IP54/ Firestop. Possible to compliment with two extra module sets if needed.

Consists of:

ComPlus 6x3, 7/8" - 1 5/8"The Roxtec ComPlus frame is a lightweight composite frame. The frame consists of sections put together as one frame with 3 openings in width. The frame has integrated knock-out covers that are easily removed before routing cables. The 6 modules fits cable with dimensions from 7/8" to 1 5/8". One single multidiameter module can seal cables of several different diameters, simply by peeling layers away from the module halves until a perfect fit is achieved. Fits indoor and outdoor installations. According to IP54/ Firestop. Possible to compliment with two extra module sets if needed.

Consists of:

ComLite composite frame, 1/4" - 7/8"The Roxtec ComLite solution is a lightweight cable entry seal comprised of a compact composite frame and sealing modules. The 6 smaller modules fit cables with dimensions from 1/4" up to 1/2" and the 12 larger modules fit cables from 3/8" up to 7/8". Fits indoor and outdoor installations.

Cable sealing ElektroskandiaCable Sealing Basic -KITBasic cable entry seal for standard applications in Main Remote or/and Macro sites combining Feeder cable, Power cable and/or Fiber cable.6 available entry seals for feeder cable size of 1/2, 1/4 and 7/8. 6 available entry seals for Fiber and/or Power cable 4,5mm – 15mm.IP-55, UV resistant and ROHS compliant

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3449/1 390 260 150 5.30

Description QtySide section composite frame 2Module set 7/8" - 1 5/8" 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3449/2 300 250 250 6.30

Description QtySide section composite frame 2Mid section composite frame 1Module set 7/8" - 1 5/8" 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3449/3 300 250 250 7.40

Description QtySide section composite frame 2Mid section composite frame 2Module set 7/8" - 1 5/8" 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3216/1 326 225 32 1.86

Consists of:

Description QtyComLite Frame 1CML 20W40 3CML 40 10-32 12Stayplate 4Assembly Gel 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3879/1 170 175 20 3

Consist of:

Description Qty Description QtyFrame 1 Compress Unit 17/8’’ Base Clamp 2 Compress Plate 11/2”Jumper Sealing 6 Compress Screw 31/4”Jumper Sealing 6 Washer Φ8 3Φ13.5 Plug 6 Sealing washerΦ8 6Cable Base Clamp 1 Sealing Tape 1Cable Sealing 6 Lubrication oil 1Cable Plug 6 Self-amalgating tape 1

1010

Page 13: Ericsson Tools Catalogue

INSTALLATION MATERIAL

Cable Accessories

Module set 1/4" - 7/8" for 12 feeder cablesProduct is installed in the Complus entry seal. The 6 smaller modules fit cables from 1/4" up to 1/2" and the 12 larger modules fits cables from 3/8" to 7/8".One single multidiameter module can seal cables of several different diameters, simply by peeling layers away from the module halves until a perfect fit is achieved.Installed in a Complus frame IP54/ Fireseal is achieved.

Consists of:

Module set 7/8" - 1 5/8" for 6 feeder cablesProduct is installed in the Complus entry seal.The 6 modules fits cable with dimensions from 7/8" to 1 5/8" . One single multidiameter module can seal cables of several different diameters, simply by peeling layers away from the module halves until a perfect fit is achieved.Installed in a Complus frame IP54/ Fireseal is achieved.

Consists of:

Pre-compression toolThe Roxtec Pre-compression tool is used during installation of Roxtec cable lead-in products. It compress the modules before installing the wedge in a complus frame.

Round frame 1/4" - 7/8" for 1 cableThe Roxtec RS seal is a round seal for single cable or pipe entries in metal sleeves or core drilled holes. The two halves, with multidiameter technology, are adjustable to fit different cable or pipe diameters. The split construction makes it easy to install around existing cables or pipes.The RS sealing can be used for a single grounding wire and optical fiber.

Round frame 3/8"-7/8" for 4 cables The Roxtec R frame is a round frame for installation in pipe sleeves or round holes. The compression is inte-grated in the frame and 4 cables/pipes with dimensions 3/8"-7/8" can be sealed. Supplied with a net installed on the back side for protection during horizontal installation. The frame can be cut open for installation around existing cables or pipes.It can seal power cable, optical fiber, grounding wire as well as RF-cable.

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3211/1 250 180 160 3.30

Description QtyWedge 1Stayplate 5RM 40 10-32 12RM 20W40 3Assembly Gel 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3211/2 250 180 160 3.10

Description QtyWedge 1Stayplate 3RM 60 24-54 6Assembly Gel 1

Product Number Length mm Width mm Height mm Weight kgsLTD 260 154/1 340 80 40 0.7

Product Number Cable/pipe diameter Length mm Width mm Height mm Weight kgsNTM 201 3656/1 1/4"-1/2" 44 37 37 0.06NTM 201 3656/2 3/8"-7/8" 86 50 50 0.30

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3655/1 85 115 115 0.94

Consists of:

Description QtyR-frame 1RM 30 4

1111

Page 14: Ericsson Tools Catalogue

INSTALLATION MATERIAL

Grounding material

Cable kit 12m, 35mm² Yellow/GreenThis kit is part of the Indoor grounding system for the RBS cabinet.Create a line , ring or tree type configura-tion of the grounding system with this kit. It is supplied with Main Earth Terminal (MET), branching and con-nection equipment.

Cable kit 17m, 35mm², Yellow/GreenThis kit is part of the Indoor grounding system for the RBS cabinet.Create a line , ring or tree typeconfiguration of the grounding system with this kit. It is supplied with Main Earth Terminal(MET),branching and connection equipment.

Cable kit 22m, 35mm² Yellow/GreenThis kit is part of thr Indoor grounding system for the RBS cabinet.Create a line, ring or tree typeconfiguration of the grounding system with this kit. It is supplied with Main Earth Terminal(MET),Branching and connection equipment.

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3669/1 330 330 60 4.778

Consist of:

Description Qty Description QtyCable 1x35mm²(2 AWG) CU, Yellow/Green 12 Jointing sleeve C89 4UL 90 degree C.Serrated washer, A2, 8,4x15 6 Insulation cover 4Nut, A2, M8 6 Cable lug, KRF 35-8 4Washer, A2, 8,4x16x1,6 6 Grounding bar, 10x50mm² 1Screw, A2, M8x30 H, St 8.8 6 Screw, 5,5x64mm 2

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3669/2 330 330 70 6,942

Consist of:

Description Qty Description QtyCable 1x35mm²(2 AWG) CU, Yellow/Green 17 Jointing sleeve 6UL 90 degree CSerrated washer, A2, 8,4x15 8 Insulation cover 6Nut, A2, M8 8 Cable lug, KRF 35-8 6Washer, A2, 8,4x16x1,6 8 Grounding bar, 10x50mm² 2Screw, A2, M8x30 H, St 8.8 8 Screw , 5,5x64mm 4

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3669/3 360 360 80 8,800

Consist of:

Description Qty Description QtyCable 1x35mm² (2AWG) CU, Yellow/Green 22 Jointing sleeve 8UL 90 degree CSerrated washer, A2, 8,4x15 10 Insulation cover 8Nut, A2, M8 10 Cable lug, KRF 35-8 8Washer, A2, 8,4x16x1,6 10 Grounding bar, 10x50mm² 2Screw, A2, M8x30 H, St 8.8 10 Screw, 5,5x64mm 4

1212

Page 15: Ericsson Tools Catalogue

INSTALLATION MATERIAL

13

Cable kit 25 m, 35 mm² Yellow/Green This kit is part of the Indoor grounding system for the RBS cabinet. Create a line, ring or tree type configura-tion of the grounding system with this kit. It is supplied with Main Earth Terminal (MET), branching and con-nection equipment.

Cable kit 1 m, 35 mm², Yellow/GreenConnect cabinets and racks to the indoor grounding system.

Cable kit 2 m, 35 mm² Yellow/GreenConnect cabinets and racks to the indoor grounding system.

Cable kit 2 m, 25 mm², black, IndoorConnect cabinets and racks to the indoor grounding system.

Basic wire kit 70 m, 35 mm²Ground the green-field site, roof top site or any outdoor site with a ring conductor arrangement (70m) with this kit. The ring conductor can be bonded with the MET, the Mast leg, the Cu wire and grounding rods with supp-lied parts.

Product Number Length mm Width mm Height mm Weight kgs4/NTM 201 201/3 300 300 80 10.45

Consists of:

Description Qty Description QtyS1Z1-K 1x35 CU yellow/green (2 AWG), UL 90 °C 25m Plug 4Grounding bar, 10x50mm² 2 Contact washer, 8.4 ST A2 10Cable lug, KRF 35-10 8 Nut, M6M M8 ST A2 10Cable lug, KRF 35-8 8 Washer, BRB 8.4x16x1.6 ST A2 10Jointing sleeve, C89 8 Screw, M6S M8x30 HST A2 10Insulating cover 8 Instruction 1Screw, TKS NR 12x64 ST 4

Product Number Length mm Width mm Height mm Weight kgs5/NTM 201 201/3 140 140 35 0.48

Consists of:Description QtyCable 1x35mm² Yellow/Green UL 90° 1Jointing Sleeve, C89 1Cable lug 35mm², ¨ =8 mm 1Insulating Cover 1

Product Number Length mm Width mm Height mm Weight kgs5/NTM 201 201/4 140 130 40 0.84

Consists of:

Description QtyCable, 2m x 35mm² Yellow/Green 1Cable lug, KRF 35-8 1Jointing Sleeve, C89 1Insulating Cover 1

Product Number Length mm Width mm Height mm Weight kgs5/NTM 201 201/2 140 140 40 0.70

Consists of:

Description QtyCable S1Z1-K UL 90°, 25 mm², Black 2mJointing Sleeve C89 1Cable lug 25mm², ¨ =8 mm 1Insulating Cover 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3425/1 420 420 140 22.10

Consists of:

Description Qty Description QtyCu-wire, Annealed 7 stringy, 35 mm² 1 Screw, M6S M8x30H 8Jointing Sleeve, C89 8 Contact Washer, LB-AZ M8 16Cable Lug, KRF 35-10 8 Nut, M6M M8 ST 8

13

Page 16: Ericsson Tools Catalogue

INSTALLATION MATERIALWire kit 40 m, 35 mm²The flexible ring electrode can be used in the grounding network at Green Field site, Container site, roof top site or any outdoor. It serves as ground net in the earthing system and is supplied with jointing sleeves for branching and screws for connection to the MET.

Wire kit 50 m, 50 mm²The flexible ring electrode is buried around the green-field site. It serves as ground net in the earthing system and is supplied with jointing sleeves for branching.

Grounding barThis product is developed to be used as an Ground bar for masts, towers and city sites.Fits round members or diagonals 42 - 76 millimetre in diameter, or on rail anchor.

Rod kit 3 mSystem for deep grounding at Green Field Site, container site or any outdoor site without any central groun-ding system. The rod kit can be used to either achieve a good lightening protection or to balance the electric potential in the outdoor grounding system. Supplied with connectors for 25 - 50 mm² grounding wire.

Consists of:

Common grounding materialUse the spare part set when jointing/branching off/connecting wires in the grounding system of the Radio base station. It can be used outside as well as inside the RBS shelter.

Product Number Length mm Width mm Height mm Weight kgs9/NTM 201 230/1 410 400 100 13.20

Consists of:

Description Qty Description QtyCable Lug 35 mm² , ¨ =10 mm 6 Serrated Washer for M8 6Flexible Conductor, Annealed 7 Stringy, 35mm² 1 Nut, M6M M8 ST 8 6Screw, M6SH M8x30H 6 Jointing Sleeve, C89 6

Product Number Length mm Width mm Height mm Weight kgs9/NTM 201 230/4 450 450 150 23.50

Consists of:

Description QtyFlexible Conductor, Annealed 7-Stringy 50mm² 1Jointing Sleeve, C89 10

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3326/1 350 220 60 0.76

Consists of:

Description Qty Description QtyPlate 1 Screw, MC6S 6x20H 2VU-Bolt, M10 M8 CC-90 1 Washer, AZ 8.4 20Nut, M10 M6M M10 4 Washer, AZ 6.4 2Washer, ¨ = 10.5x20mm 2 Washer, 8.4 10Nut, M6M M8 10 Washer, 6.4 2Screw, MC6S 8x20H 10

Product Number Length mm Width mm Height mm Weight kgs9/NTM 201 230/2 1505 80 35 4.10

Description QtyEarth rod, 1500mm 2Tip 1Coupling 1Driving stud 1Cable clamp 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3335/1 260 210 140 4.90

Consists of:Description Qty Description QtyInsulating Cover 10 Tooth Lock Washer M8 20Cable Lug, KRF 25-10 10 Tooth Lock Washer M10 20Cable Lug, KRF 35-10 10 Nut, M8 20Cable Lug, KRF 50-10 10 Nut, M10 20Cable Lug, KRF 70-10 10 Screw, M8x25mm 20Cable Lug, KRF 95-10 10 Screw, M10x25mm 20Jointing Sleeve 89 20 Instruction 1

1414

Page 17: Ericsson Tools Catalogue

INSTALLATION MATERIALBuilding to earth grounding kit 40mA grounding kit for tower with aluminium wire and grounding rod.The use of aluminium cable instead of copper cable reduces the risk of theft at site.The grounding rod 2,4m according to SS 436 21 10 is used as sacrificial anode and it protects the Cu wire in the ground.

Rooftop grounding, Aluminium 40mA kit for grounding of a rooftop site.The use of aluminium cable instead of copper cable reduces the risk of theft at siteCreate a ring or grid configuration with the AL-wire and the supplied jointing clamps.Connect the supplied AL wire with an external AL grounding wire Ø = 8-10mm in T, X, or parallel joint.

Tower grounding kit 40m

Grounding kit designed for the tower. Al-wire connects tower with the supplied grounding bar.The use of aluminium cable instead of copper cable reduces the risk of theft at site.

Grounding Rod kit 2.4m Al/Cu

A grounding kit designed for deep grounding of a site with aluminium wire Ø = 8-10 mm.The use of aluminium cable instead of copper cable reduces the risk of theft at site.Connect the supplied Cu wire with external AL wire in parallel joint.

Joint Clamp Al/CuA grounding clamp kit for jointing wire or round conductor with diameter Ø =8-10 mm.Al / Cu 50mm² Only parallel connection, above ground.Stainless Steel/Stainless SteelT-, X- or parallel connection.

Product Number Length mm Width mm Height mm Weight kgsNTN 201 3753/1 800 400 100 9,9

Description

Consist of: QtyAl-wire 49mm², 40m 1Pipe, 0.8m 1Extension Pipe, 0.8m 2Impact bolt 1Tip, hardened 1Cu-wire 50mm², 3m 1Joint clamp 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3755/1 400 400 100 6.0

Consist of:

Description QtyAl-wire,7-strand, 49 mm² 40mJoint Clamp, Ø = 8-10mm 6

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3754/1 400 400 100 6,6

Description

Consist of: QtyAl-wire, 7 Strand, 49 mm² 40mJoint Clamp, Ø = 8-10mm 6Clamping Bolt, M8 1Grounding bar 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3757/1 800 60 300 4,5

Consist of:

Description QtyPipe, 0.8m 1Extension Pipe, 0.8m 2Impact bolt 1Cu-wire 50mm², 7-Strands, 3m 1Joint clamp Ø = 8-10 mm Al/Cu 1Tip hardened, 16 - 70 mm² 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3756/1 150 120 80 0,95

Consist of:

Description QtyJoint clamp, Al/Cu 10

1515

Page 18: Ericsson Tools Catalogue

INSTALLATION MATERIALGrounding link 0,3m, 16sq/mmThe grounding link to be used when two cable ladders joint together or branched.Designed according to SEN 24510 and BS 4579:1 norm.Supplied with two M8 bolt and nuts.

Grounding material other

Jointing sleeve (cu)The C-formed jointing sleeves (C-clamp) are designed for jointing of standard cu-cables and connection of branch lines.

Indoor grounding 3/8" - 1 5/8"This kit connects 3/8" - 1 5/8" feeder with the indoor grounding system.

Indoor quick grounding 25 - 35 mm²Indoor grounding clamp for insulated multithreaded grounding or power cable with dimeter 9,5 - 11,5 mm (25 - 35 mm²). UL approved .This clamp is quick and easy to use in a narrow space. It does not require any large press tool. It joints 2 cables with cross sections according to table below.

Product Number Length mm Width mm Height mm Weight kgsRPM 119 0597/1 200 200 30 0,3

Consist of:

Description QtyCable 1x16sq/mm, Black, L=0,3m 1Cable lug 16 sq/mm, hole 8,4mm 2Shrinking tube, L=35mm 2Nut M8+ Bolt M8x16mm 2

Product Number

Type Branching size mm²

Length mm Width mm Height mm Weight kgs

SNT 102 26 C 89 25-50/25-50;25/25-16

30 18 16 0.04

Product Number Length mm Width mm Height mm Weight kgsNTM 201 219/1 210 160 30 0.65

Consists of:

Description QtyHose Clip 1Cable, 1x25mm², 2m 1Insulating cover 1Jointing Sleeve C89 1Cable lug, 25mm² 1

Cross section 1 Cross section 225 mm² 25 mm²25 mm² 35 mm²35 mm² 35 mm²

Product Num-ber

Length mm Width mm Height mm Weight kgs Clamps Qty/kit

NTM 201 3657/2 290 160 170 2.08 25NTM 201 3657/1 170 210 90 0.87 10

Consists of:NTM 201 3657/1 NTM 201 3657/2

Description Qty QtyClamps 10 25Tool 1 1

1616

Page 19: Ericsson Tools Catalogue

INSTALLATION MATERIAL

Adjustable platform material-civil works

Free standing plattform on roofThe platform is designed for rooftops where a non-penetrative freestanding solution isrequired. A Platform for outdoor RBS-Cabinets. Adjustable for up to six degrees inclinedroof plane. The platform is easy to assemble and can be carried the site.

Antenna Tube Kits, 2,5m and 5mAntenna Tube kits that is easy to install on the free standing platform. (SMA 901 05/1 )Tube and Support are tiltable so the antenna rigging can be done without climbing.

Product Number Length mm Width mm Height mm Weight kgsSMA 901 05/1 2320 670 445 200.00

Consists of:

Description Qty Description QtyRubber carpet 2 Washer, BRB 20Rubber carpet 5 Bolt, M6S 4I-beam 1 Grating 1I-beam 1 Holder for grating 4U-beam 3 Profile 1U-beam 2 Screw, Washer/Spring 8Bolt, M6S 22 Screw, M6S 2Washer, BRB 22 Washer, BRB 8Nut, M6M 44 Groundbar 1Frame for cabinet 1 Key/Spanner, 30mm 1Whole threaded rod, WTR 2 Key/Spanner, 18/19mm 1Nut, M6M 20

Product Number Length mm Width mm Height mm Weight kgsSXK 107 424/1 2540 290 250 41.00SXK 107 424/2 2540 290 250 51.70

Consists of:SXK 107 424/1 SXK 107 424/2

Description Qty QtyTelescopic strut 2 2Telescopic strut 2 2U-bolt set, CC92 1 1Clamp, CC62-145 1 1Bolt, M6S 9 9Bolt, M6S 3 3Nut, M6M 36 36Washer, BRB 14 14Bolt, M6S 6 6Angle 3 3Plate/Washer 1 1Foot for strut 1 1Tube, 2500mm 1 2Tube, 400mm - 1Bolt, M6S - 4Nut, M6M - 8Washer, BRB - 4

1717

Page 20: Ericsson Tools Catalogue

18

INSTALLATION MATERIALExtension kitExtension kit to 2 SP FRAME for wall mount.

Consists of:

Antenna support material

Tower mountedThis universal antenna support can be used in pairs mounted on tubular max 210 mm or profile antenna tower legs max 150x150 mm. The support can be adjusted to tilt the antenna inclination.

Antenna tube, 1.6m, 2.9 m and 4 m This tube is for mounting antennas.

Product Number Length mm Width mm Height mm Weight kgsSXK 118 0933/1 2400 105 130 16

Description Qty Description QtyPos.1 Aluminium profile, 2 Pos.4 Feeder clamp assembly kit

L=2400mm feeder clamp 40screw bolt, M8x100 4

Pos.2 Joint frame 2 screw bolt, M8x70 4locking nut, M8 8washer, Rb 8,4 8

Pos.3 Joint assembly kit Pos.5 Anntena bolts assembly kitscrew bolt, M12x120 4 Screw bolt, M8x25 4washer Rb 13 8 locking nut, M8 4locking nut, M12 4 washer, Rb 8,4 4tube of Gleitmo 1

Product Number Length mm Width mm Height mm Weight kgsSXK 107 2126/1 290 190 150 8.00

Product Number External diameter Length mm Width mm Height mm Weight kgsSXK 120 729/16 60 1600 60 60 2.3SXA 120 215/29 75 2900 75 75 6.15SXA 120 216/40 90 4000 90 90 14.40

Description QtyAluminium Tube 1

18

Page 21: Ericsson Tools Catalogue

INSTALLATION MATERIAL

19

Antenna support for wall or roof, 6 mThis antenna mounting set is developed for sector- and parabolic antennas.The set can be installed on roof or wall.The footing and guyed support can be wall/roof mounted through hole or with expanding effect.

Antenna support kit for wall, 100 - 490 mmA light none penetrating rooftop mount to install small-, sector-, and parabolic antennas.The mounting set can be mounted on almost any kind of low-walls (parapet) with thickness 100 - 490 mm. The force, the mount creates, is equally distributed, therefore it can be mounted on rather weak walls.

Antenna support kit for wall, 500 - 1000 mmA light non penetrating rooftop mount to install small-, sector-, and parabolic antennas.The mounting set can be mounted on almost any kind of low-walls (parapet) with thickness 500 - 1000 mm. The force, the mount creates, is equally distributed, therefore it can be mounted on rather weak walls.

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3162/1 3000 220 110 64.40

Consists of:

Description Qty Description QtyFoot mount 2 3-sector clamp 3Screw 4 Screw 3U-bolt set M12 4 Shackle-bolt with pin 3Washer 24 Hammer capsules 6Nut 48 Whole threaded rod 3Threaded rod 6 Washer 6Square washer 6 Lifting eye nut 3Hammer capsules 6 Washer 3Tube Ø 75 L=3000mm 2 Nut 6Tube joint 1 Guy wire 3Set screw 4 Tension set 2

Product Number Length mm Width mm Height mm Weight kgsSXK 107 2146/1 1000 300 100 14.00

Consists of:

Description Qty Description QtySquare profile 3 Rubber fender 6U-profile 1 Screw 12U-bolt-set 3 Locking nut 12Nut 4 Washer 12Washer 2 Screw 2Whole threaded rod 1 Washer 12Nut 2 Tube 1Washer, Nord lock 2 Tube 1

Product Number Length mm Width mm Height mm Weight kgsSXK 107 2146/2 1010 200 150 15.50

Consists of:

Description Qty Description QtySquare profile 3 Rubber fender 6U-profile 1 Screw 12U-bolt set 3 Locking nut 12Nut 4 Washer 12Washer 2 Screw 2Whole threaded rod 1 Washer 12Nut 2 Tube 1Washer, Nord lock 2 Tube 1

19

Page 22: Ericsson Tools Catalogue

INSTALLATION MATERIALAntenna support for roof mount system, 3 mThis product is designed to meet the demands for a sturdy roof top mount. The main tube is fixed to the roof and supported with two telescopic supports 1.95 – 3.2 m.The mount is flexible and can be mounted on a slanting roof.

Guyed roof top kit, 3.0 mThe Guyed roof top kit is designed to meet the demands of a sturdy antenna mount for directional antennas and parabolas. Mount it on a roof top site where drilling is not allowed. The construction is balanced with concrete blocks (500x500x50 mm). The blocks are not supplied.

Greenfield tripod, 5.5 mThe 5,5 meter high Greenfield Tripod is designed to carry directional antennas and dish.It can be located on hills tops, parking lots, fields, or even on roof top sites where drilling is not allowed. The construction is preferably balanced with concrete blocks 500x500x50 mm (not supplied).

3-Sector antenna mountThis product is designed to meet the demands of a sturdy clean 3-sector installation.The installation is fast and simple

Product Number Length mm Width mm Height mm Weight kgsSXK 107 2022/1 600 300 70 43.60

Consists of:

Description Qty Description QtyTelescopic strut 2 Washer BRB 4Telescopic strut 2 Foot for strut 2Screw M6S 2 Bolt M6S 1Nut M6M 10 Wall mount/foot 2U-bolt set, 7pcs 1 Washer BRB 1U-Clamp 1 Nut M6M 2Angle 2 Bolt M6M 1Screw M6S 4 Tube 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3164/1 1200 800 340 80.50

Consists of:

Description Qty Description QtyRubber carpet 1 Locking nut 16Cross 1 Angle 4Threaded rod 4 " 1Washer 48 Mount f. Strut 4Nut 50 Screw 12Bottom plate 4 Screw 4Screw 8 Clamp w. Ear 2Foot 1 Tube 1Screw 2

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3167/1 2160 540 250 132.00

Consists of:

Description Qty Description QtyLower foot plate 3 Lower support clamp 3Upper foot plate 3 Lower support clamp w. ear 3Angle 12 3-sector clamp 3Whole threaded rod 12 Centre tube 1Joint piece 3 Leg 3

Product Number Length mm Width mm Height mm Weight kgsSXK 107 2150/1 260 510 110 6.60

Consists of:

Description Qty Description QtyClamp 6 Bracket 6Screw 6 Flat washer 12Screw 6 Screw 6Flat washer 6 Locking nut 6Locking nut 6

2020

Page 23: Ericsson Tools Catalogue

INSTALLATION MATERIALRoof Tube single-basedSelf-supporting roof single-based system is design for small directional antennas andsmaller parabolic dish. The non-penetrating mount is easy and fast to assemble.Mounted height = 2000mm, Mounted floor area, ø = 600 mm.Pole diameter, ø 60 mm

Additional antenna support systemAdditional tube system enables an antenna tube to be mounted next to an existing pole.The tube is adjustable and tiltable.Dimensions:Maximum separation poole = 530 mm.Pole length = 2000 mmPole diameter, ø =60 mm

Wall bracketThis bracket is designed to meet the demands of a sturdy wall mount. The installation is fast and simple. The bracket fits tube with diameter 60-90 mm. (Tube is not included)

Stand-off Wall BracketThis product is designed to meet the demands of a sturdy off set wall mount. Theinstallation is fast and simple. The bracket stands out 400mm. The bracket fits tube with diameter 60-90 mm. (Tube is not included)

Product Number Length mm Width mm Height mm Weight kgsNTM 201 1205/1 625, 2000 625, 60 410, 60 91, 10

Consist of:

Description: QtyBottom plate 1Upper plate 1Rubber duct 1Tube 1Counter weight 3Threaded rod 3Nut, M6M 11Washer, BRB 9Screw, M6S 2

Product Number Length mm Width mm Height mm Weight kgsSXK 107 2151/1 2000 395 150 14

Consist of:Description: QtyL-profile 2Clamp 4U-bolt,M10 2Tube 2000x60mm 1Clamp 4Whole threaded rod M10 4Nut, M6M M10 28Washer 16

Product Number Length mm Width mm Height mm Weight kgsSXK 107 2026/1 346 158 158 4

Consist of:

Description: QtyWall clamp 340x130x50 2U-bolt M12 C-C 130 2Washer 13x24 4Nut M6M M12 8

Product Number Length mm Width mm Height mm Weight kgsSXK 107 2027/1 403 580 22 12

Consist of:

Description: QtyWall clamp 577x400x110 2U-bolt M12, C-C 130 2Washer 13x24 4Nut M6M M12 8

2121

Page 24: Ericsson Tools Catalogue

INSTALLATION MATERIAL

Common fastening material

Common installation materialThe Common Installation materiel is consumable supplies for indoor installations. For example, inside the radio base station room you can fasten the feeder cable to a cable ladder if you use the cable clamp. Tie straps for strapping grounding cable, transmission cable, alarm cable etc. to cable ladders or cable profile.Electro tape of different colours to mark feeder sectors. By that way avoiding mixing up Tx/Rx branch during installation. Label holders for permanent marking of feeder by that way avoiding mixing up co-sited operators equipment.

Additional fastening materialA complete set of mounting/fastening material for the RBS site. Expander screws, screws and plugs for fastening equipment no matter the type of wall. Possible to mount against brick, wood, concrete or plaster partion wall. Cable ties for strapping grounding, power, feeder cable to cable profiles and cable ladders.Pliers/punch bend for potential equalisation of metal objects in the site.

Shield anchor, loose bolt set, M12Shield Anchor set for fastening RBS Installation Frame and Cabinet.

Screw and washer kit, M10x60 mmBolt and washer for mounting the Power Cabinet BBS 2000i to the Base Frame.

Product Number Length mm Width mm Height mm Weight kgs7/NTM 201 201 410 320 105 2.87

Consists of:

Description Qty Description QtyTie Strap, 366x4.7 Black, 100 pcs 2 Screw, 100 pcs, TST 8x1 ½ PH2 1Wall Plug, Red, 100 pcs 1 Electro tape, White 1Tie Strap,141x3.6 Natural, 100 pcs 1 Electro tape, Red 1Tie Strap,290x3.6, 100 pcs 1 Electro tape, Blue 1Tie Strap,112x2.4, 100 pcs 2 Electro tape, Black 1Cable Clip,10-14mm, 100 pcs 1 Label Holder, 100 pcs 1Screw, 100 pcs, TST 8x3/4 PH2 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 1491/1 540 430 130 13.00

Consists of:

Description QtyCable clip TC 7-10mm l=25mm, white, 100 pcs 1Cable clip TC 10-14mm l=30mm, white, 100 pcs 1Tie strap w=3.6mm l=141mm, natural, 100 pcs 2Tie strap w=4.7mm l=366mm, black, 100 pcs 2Fixing band TUB 12, 10m 1Hammer screw fixing 5x50, 100 pcs 1Spring toggle cavity fixing 13xM5S, 25pcs 1Self drill cavity fixing 25Screw plug fixing 6x35, 25 pcs 1Screw anchor cavity fixing TMX-6D, 50pcs 1Screw anchor cavity fixing TMX-6E, 50 pcs 1Pliers/Punch-bend 1Tie strap 10x0.5mm, L=10m 1Set of materials: screw M8x16, nut, clamp, 10 pcs 2Tie strap support, 100 pcs 1Set of materials: screw M5x12, elastic washer, nut, 50 pcs 1Set of materials: screw M5x25, elastic washer, nut, 50 pcs 1Potential grounding kit 1Shield anchor set, 110mm 2Shield anchor set, 90mm 2Compartment box 1

Product Number Qty Length mm Width mm Height mm Weight kgsNTM 201 2977/1 4 110 110 20 0.80NTM 201 2977/2 4 90 110 20 0.80NTM 201 2977/3 4 130 110 20 0.80NTM 201 2977/4 6 110 110 20 1.2

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3444/1 80 30 20 0.17

Consists of:

Description QtyBolt, MC6S 10x60mm D ST 8.8 FZV4 4Washer, BRB 22x11x2mm4 4

2222

Page 25: Ericsson Tools Catalogue

INSTALLATION MATERIALScrew and plug setUsed for fasten equipment to walls.

Cable tie, stainless steel band (Plastic coated)

Flexible tape-shaped tie strap with a disconnected locking device at one end. Use this tie strap to bundle together or fasten cables, lines or components.

Generic marking kitIdentify and separate your indoor equipment, cable or fiber with this label kit.It marks 100 cables with a maximum diameter of 47,5 mm.

Miscellaneous installation material

Tube kit, 2x3 m indoorThe flexible tube kit is used for protection of cables indoor against exterior mechanical influences.

Consistst of:

Tube kit, 3x3 m indoorThe flexible tube kit is used for protection of cables indoor against exterior mechanical influences.

Consists of:

Wall support kit for indoor cabinetMaterial for supporting RBS cabinet to wall.

Product Number Length mm Width mm Height mm Weight kgsNTM 201 257 120 90 30 0.15

Consists of:

Description QtyScrew, T6S 8X65 ST FZV 5Wall Plug, Green 5Washer, BRB 10.5X22X2 ST FZB 5

Product Number Length mm Width mm Weight kgs Max Bundle diameter PcsSET 145 064/230 230 6.4 0.007 55 1SET 145 064/305 305 6.4 0.009 80 1SET 145 095/457 457 9.5 0.020 130 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3887/1 100 100 30 0,250

Consists of:

Description QtyMarking plates (90x19mm) 100Cable tie lenght 150 mm) 200Marking pen 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 218/3 330 330 110 1.13

Description QtyFlexible Tube 25mm, l=3m 2Tube holder 15Jointing sleeve 5Conduit elbow 3

Product Number Length mm Width mm Height mm Weight kgsNTM 201 218/5 400 280 220 1.85

Description QtyFlexible tube 25mm, l=3m 3Tube holder 15Jointing sleeve 3Conduit elbow 5Terminal box 3

Product Number Length mm Width mm Height mm Weight kgsNTM 201 2413/1 300 100 50 0.86

Consists of:

Description Qty Description QtyAngel Bracket 2 Screw, T6S NR 8x65 ST FZV 2Pendant Rail 2 Washer, BRB 10.5x22x2 ST FZV 2Screw Set 1 Screw, M6S M10x25 H ST FZG 2Plug, TP4 2 Washer, BRB 10.5x20x2 ST FZG 2

2323

Page 26: Ericsson Tools Catalogue

INSTALLATION MATERIALJointing sleeve kit (c-clamps)The Jointing Sleeve is used in the bonding point between two Cu wires in the grounding system. One jointing sleeve branch off /splice wire with the cross section according to the table below. The jointing sleeve is tested according toIEC 61 238-1. Use the crimping tool set LTT 601 86 to accomplish a correct crimp.

Cable lug kit, 35 mm²This cable lugs are used for connecting of the power and grounding cables in an RBS site.Use the crimping tool set LTT 601 86/89 to accomplish a correct crimp.

Consists of:

Cable lug kit, 50 mm²This cable lugs are used for connecting of the power and grounding cables in anRBS site. Use the crimping tool set LTT 601 86/89 to accomplish a correct crimp.

Consists of:

Cable lug kit, 50 and 70 mm²Used when connecting the RBS to the earthing system. Use the crimping tool set LTT 601 86/89 to accom-plish a correct crimp.

Consists of:

Cable lug kit, 70 mm²This cable lugs are used for connecting of the power and grounding cables in anRBS site. Use the crimping tool set LTT 601 86 or LTT 601 89 to accomplish a correct crimp.

Consists of:

Cable lug kit, 95 mm²This cable lugs are used for connecting of the power and grounding cables in anRBS site. Use the crimping tool set LTT 601 86 or LTT 601 89 to accomplish a correct crimp.

Consists of:

Cable lug kit, 150 mm²Use these cable lugs to connect the power and grounding cable at the RBS site. Use the crimping tool set LTT 601 86 to accomplish a correct crimp.

Consists of:

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3446/1 310 220 150 3.50

Consists of:

Description QtyJointing sleeve, C89 50Wire 1 (mm²) Wire 2 (mm²)16 3516 5025 2525 5035 3535 5050 50

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3477/1 90 140 80 2.40

Description QtyCable lug, 35mm², hole 10mm 100

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3477/2 180 140 80 2.70

Description QtyCable lug, 50mm², hole 10mm 100

Product Number Length mm Width mm Height mm Weight kgsNTM 202 187/1 60 60 20 0.15

Description QtyCable lug, Ø=50mm² , hole 8mm 2Cable lug, Ø=70mm² , hole 8mm 2

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3477/3 180 140 80 2.10

Description QtyCable lug, 70mm², hole 10mm 50

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3477/4 180 140 80 3.90

Description QtyCable lug, 95mm², hole 10mm 50

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3477/5 180 140 80 3.25

Description QtyCable lug, 150mm², hole 12mm 25

2424

Page 27: Ericsson Tools Catalogue

INSTALLATION MATERIALinstallation material

ESB cableThis cable is used for synchronisation of RBS 2106 cabinets.

Consists of:

Product Number Length mm Weight kgsNTM 201 3072/1 3240 0.18NTM 201 3072/2 7020 0.37NTM 201 3072/3 12420 0.59NTM 201 3072/4 25380 1.06NTM 201 3072/5 75060 3.15

Description Cable 4x2 Label holder Cable clamp Connector Cover shieldESB Cable 3,240 m 2 2 1 1ESB Cable 7,020 m 2 2 1 1ESB Cable 12,420 m 2 2 1 1ESB Cable 25,380 m 2 2 - -ESB Cable 75,060 m 2 2 - -

2525

Page 28: Ericsson Tools Catalogue

OPTICAL INTERFACE LINK, RRUOptical Interface Link, RRU Main-Remote Systems

Overlength Box kitThe box holds up to 30 m OIL cable excess length. It is easy to mount to a wall, tower leg etc and possible to stack on to each other.

Cable Support kitEnd support for three power cables and three OIL cables in the tower and mast, one hoisting grip for each cable. Three hosting grip for each oval quick link. The oval quick link fitted to the wire loop support.

Outdoor Cable Tube kitThe cable tube kit is used outdoor for protection of cables and fiber against exterior mechanical influences. The tube is possible to open for easy installation of preassembled cables and updates. Each tub is 1.7 m long and inner diameter is 35 mm, enough to fit three OIL cables and three power cables.Fastening material for tower/mast mounting and wall mounting included.

Outdoor Slitted Conduit kit 27mmThe tube kit is used for protection of cables and fiber against exterior mechanical influences.The tube is ope-nable for easy installationof preassembled cables.Each tube is 2,1m long and inner diameter is 23.5mm, enough to fit one OIL cable and one power cable.

Outdoor Slitted Conduit kit 48mmThe tube kit is used for protection of cables and fiber against exterior mechanical influences.The tube is openable for easy installation of preassembled cables.Each tube is 2.1m long and innerdiameteris 44.0mm, enough to fit three OIL cables and three power cables.

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3729/1 280 440 42 1.10

Consist of QtyBox 1Box cover 1Cable Tie 457X9,5 2Cable Tie Velcro tape 1Bracket 2Mounting bolt 4Locknut 4Cover bolt 6Wall plugg TP2 red 4Wall screw TGS-C3 4,2X25 4Wall washer 4,3X8 4

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3728/1 350 300 10 0.435

Consists of

Description QtyWire loop support 2Oval quick link 2Hoisting grip 6mm 3Hoisting grip 12mm 3Sewing-thread 700mm 2

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3727/1 1800 300 300 3.50

Consist of

Description QtyCable conduit slitted 5Straight coupler slitted 5Tie strap, 457X9,5mm 15Electrical tape, Black 20MX19MM 1Electrical tape, Black 20MX50MM 1Mounting screw 30Plastic plug, Red 30Conduit clamp 15

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3929/1 2200 90 90 2,0

Consist of:

Description QtyConduit 27mm, L=2100mm 5

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3929/2 2200 160 130 3,5

Consist of:

Description QtyConduit 48mm, L=2100mm 5

2626

Page 29: Ericsson Tools Catalogue

OPTICAL INTERFACE LINK, RRUFlexible Conduit kit 25mThe flexible conduit kit is used for protection of cables against external mechanical influences.Inner diameter 40mm and it fits at least three OIL (optical)cables and three power cables forMain-Remote roof-top sites or or to be used in tower and mast.The flexible tube is 25m long.The kit also includes T-branches, fastener and pull wire for fast and easy installation.

Indoor Cable TrunkThe cable trunk is used indoor for protection of cables and fiber against exterior mechanical influences.Wall mounting or cable ladder mounting.

Labelset WCDMA, RRU

Marking of optical fibre cables and power cables for WCDMA (RRU) systems.

Labelset GSM, RRUMarking of optical fibre cables and power cables for GSM (RRU) systems.

Fiber check toolThe Fiber check tool is an simple way of verifying that the OIL cable is ok, and that it´s not been damaged e.g. during installation. The pen is held in one end of the OIL cable and if the cable is ok a red light from the laser pen is visible in the other end. If no light is visible then is either the cable end dirty, and have to be cleaned, or the cable is damaged, and have to be replaced. The pen can be set to either have flashing or continuous light. It comes in a box with two AAA-batteries included.

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3811/1 950 900 250 11,0

Consist of:

Description QtyFlexible conduit 50/40mm, including pullwire 25Straight coupler for flex.conduit 50mm 5T-branch for flex. conduit 2Conduit clip, pack of 50 1Mounting screw 25x4,2mm, pack of 100 1Plastic plug, Red, 35x6mm, pack of 100 1Tie strap, stainless steel plastic coated, 457x9,5 30Electrical tape, Black 2

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3730/1 2100 200 200 1,10

Consists of:

Description QtyScrew,nut and washer kit 1Cable trunk, 40x25mm L=2m 4Screw 4,2x25mm, TGS-C3 10Plastic wall plug, Red 10

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3767/1 170 120 5 0.04

Consists of:

Description Qty Description QtyLabel sheet (Sector 1) 1 Label sheet (OIL) 1Label sheet (Sector 2) 1 Label sheet (Power) 1Label sheet (Sector 3) 1 Label sheet (A) 1Label sheet (Sector 4) 1 Label sheet (B) 1Label sheet (Sector 5) 1Label sheet (Sector 6) 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3767/2 170 120 5 0.02

Consists of:

Description QtyLabel sheet (Cell A) 1Label sheet (Cell B) 1Label sheet (Cell C) 1Label sheet (DX1) 1Label sheet (DX2) 1Label sheet (Power) 1Label sheet (OIL) 1

Product Number Length mm Width mm Height mm Weight kgsLPB 112 102/1 175 70 22 0.11

2727

Page 30: Ericsson Tools Catalogue

OPTICAL INTERFACE LINK, RRUFerrule end-face cleanerThe cleaning tool can be used in the field or in the factory to effectively clean ferrules within adapters and cable assemblies and restore the fiber optic connectors preformance. It has a polyester static free cloth for optimal cleaning. Includes 350 swipes per cleaner (1 swipe per cleaning).The cleaning tip is adjustable to 45 degrees for angled adapters and the tip is spring-loaded for controlled cleaning pressure. The cleaning tool is applicable for PC and APC type ferrules and ideal for cleaning transci-ver ports.

DC power groundingA grounding kit that is suitable for grounding of 12-30 mm coaxial cables andshielded power cables such as the DC power cable for the RRU. Waterproof sealing.

Outdoor Fiber Connection BoxAn outdoor fiber connection box for Fiber To The Antenna Applications (FTTA) and Radio Remote (RR) installations.The box supports up to 8 RR heads 8 duplex SFF or 8 simplex LFF adapters and it is fitted with bend radius limiting mandrels.Suitable for mount on poles, walls or tower legs with round, L- and V-shape.IP 66/67 EN 60529, NEMA 1,4,4X ,6, 12 and 132 knock-out holes cable gland M162 knock-out holes cable gland M25Operating temperature: -40° to +85°

Surge Protection Power Distribution BoxDC (-48V) Power Distribution panel with Surge protection device and Power Circuit Breakers for three(NCF 901 03/1) and six RRU’s(NCF 901 03/2).Applicable for Main-Remote systems when RRU’s are powered by an indoor DC power system.Ingress Protection according to IP30.

Product Number Length mm Width mm Height mm Weight kgsLTT 601 154/1 280 60 27 0.11

Product Number Length mm Width mm Weight kgsNGT 901 21/1 200 180 0,161Consist of:

Description QtyContact bar ½., 3/8., 5/8. 7/8 1Copper mesh 1Socket head cap 1Self-amalgating tape 2Cable assembly 500mm, 16 mm² 1Cable lug Ø = 8 , 16 mm² 2

Product Number Length mm Width mm Height mm Weight kgsNCD 901 37/1 75 180 255 1Consist of:

Description Qty Description QtyInjection moulded box 1 LC duplex adapter,Single mode 3Cable clamps 4 Cable gland 3-fold 2Adapter plate 8SFF duplex 1 Cable gland single ( Ø=10mm) 2Pole mounting bracket 2 Cable gland blindplug 4Cover with integrated screws 1 Mounting nut 1Quick hose clamps 60-500mm 2

Product Number Length mm Width mm Height mm Weight kgsNCF 901 03/1 97 260 230 1.700NCF 901 03/2 97 260 230 2.450Consist of:

Description / NCF 901 03/1 Qty Description/ NCF 901 03/2 Qty

Distribution board IP30, 13 modules 1 Distribution board IP30, 13 modules 1MCB 1-pole, 16A, S201M-C16 3 MCB 1-pole, 16A, S201M-C16 6Busbar 1-pole, 16A 1 Busbar 1-pole, 16A 2End protection for busbar 2 Endprotection for busbar 4Cover plate for spare space 1 Cover plate for spare space 1Surge protection device(SPD)-48V 1 Surge protection device(SPD)-48V 2Earth cable, 1m, 16mm², Black 1 Earth cable, 1m, 16mm², Black 1Screw and plug fixing kit, 4pcs of each 1 Screw and plug fixing kit, 4pcs of each 1Cable RQ 6mm², Black, L=0,28m 1 Cable RQ 6mm², Black, L=0,28m 2Cable RQ 6mm², Grey, L=0,28m 1 Cable RQ 6mm², Grey, L=0,28m 2

2828

Page 31: Ericsson Tools Catalogue

OPTICAL INTERFACE LINK, RRU

Fiber SealingScrew Cap with PG 16 thread for 1-3 fibersIt seals fibers with diameter 3,5-5,0 mmInstalling temperature: [-30, +100] °C

OTDR InstrumentAn instrument designed to find disruption/reflection in optical cables during installation and maintenance.A kit solution for FTTX drop cables and MDU cables that reduces costly re-visits at site.Features- OTDR measurement up to 10 km ( l = 1550 nm) with supplied components.- Optical power meter (-5 to -45dBm, Accuracy +/-0.5 dB, Max input +10dBm)- Palm Size (7,5"x3,8"x1,9" / 190x96x18 mm)- IP 51, sealed design. - Clear "Pass"/ "Fail" presentation of measurements on display.

Fiber/power clampCombined clamp for power cable Ø = 9-13 mm and fiber cable Ø=4,5mm – 6,5mm.Suitable for main remote installations.

Fiberoptic Cable Assemblies

Fiberoptic Cable Assemblies ODC An extension OIL cable assembly ODC for the RRU site.

Product Number Length mm Width mm Height mm Weight kgsNDM 902 025/1 41 30 41 0,017

Product Number Length mm Width mm Height mm Weight kgsLPK 102 111/1 190 96 45 0.800

Consist of QtyNetwork master 1Drop cable, fault locator module 1Power meter, 1550nm single mode, UPC 1SC Connector 1LC replacement Adaptor 1Soft Case 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3931/1 145 55 1,6 0,180NTM 201 3931/2 180 55 2,1 0,228NTM 201 3931/3 220 55 2,6 0,284

Consist of:

NTM 201 3931/1 NTM 201 3931/2 NTM 201 3931/3Description Qty Description Qty Description QtyClamp, RRU 10 Clamp, RRU 10 Clamp, RRU 10Fiber/Power bushing 10 Fiber/Power bushing 20 Fiber/Power bushing 30

Product Number Description Lenght Cable diameter WeightTSR 899 145/1 R1A 10 m ODC Fiber Assemby 10m 4,8 mm 0,366kgTSR 899 145/2 R1A 25 m ODC Fiber Assebly 25m 4,8 mm 0,750kg

2929

Page 32: Ericsson Tools Catalogue

TOOLSTools Tool sets

Personal tool setThe personal tool set is specially designed for site installation and relevant to all types of RBS cabinets.

Consists of:

Personal tool set lightThe personal tool set is specially designed for site installation and relevant to all types of RBS cabinets.

Maintenance tool setThe maintenance tool set is specially designed to maintain the RBS equipment and relevant to all types of RBS cabinets.

Product Number Length mm Width mm Height mm Weight kgsLTT 601 135/1 230 500 400 13.40

Description Qty Description QtyTool case 1 Saw blade, 12" 24tpi (10pcs) 1First Aid Kit 1 Socket set 3/8" 10-19mm, incl bits 1Static control wrist strap 1 Socket 16 mm 1Ear muffs 1 Socket 18 mm 1Eye protectors 1 Hexagon socket 8 mm for 3/8" wrench 1Gloves, size L 1 Hexagon socket 4 mm for 3/8" wrench 1Gloves, size XL 1 Screwdriver for Bits 1Cable cutter < 95mm² 1 Screwdriver TORX no. 10 1Side cutting plier 8160 1 Screwdriver TORX no. 15 1Slip joint plier 1 Screwdriver TORX no. 20 1Plate shears, straight 1 Screwdriver TORX no. 25 1Knife 1 Screwdriver TORX no. 30 1Wire stripper 0,2-6,0 mm 1 Screwdriver, 0.4x2,5x60 1Cable sheild cutter, 25-150 sq.mm 1 Screwdriver, PZ 2 1Pen hammer 1 Slotted socket 27 / 32mm 1Spirit level 200mm, magnetic 1 Extension bar 3/8" x 250 mm 1Termination tool, Krone 1 Set of U-wrench 1Tool for cable ties 1 U-wrench, 21-23 mm 1Measuring tape, 6 m 1 U-wrench 24-27mm 1File 6" ,flat 1 Multimeter kit 1File, half-round 1 Torx bit, TT30 1File, round 1 QMA Extractor 1Hack saw 1

Product Number Length mm Width mm Height mm Weight kgsLTT 601 156/1 430 160 300 8,4

Consist of:

Description Qty DescriptionTool case 1 Screwdriver for bits 1First aid kit 1 Screwdriver TORX no.10 1Cable cutter <95mm² 1 Screwdriver TORX no.15 1Side cutting plier 8160 1 Screwdriver TORX no.20 1Slip joint plier 1 Screwdriver TORX no.25 1Knife 1 Screwdriver TORX no.30 1Wire stripper 0,2-6,0mm 1 Screwdriver, 0.4x2.5x60 1Cable shield cutter 25-150mm² 1 Screwdriver, PZ2 1Spirit level 200mm, magnetic 1 Screwdriver, 5.5x150mm 1Tool for cable ties 1 Slotted socket 27/32mm 1Measuring tape, 6m 1 Extension bar 3/8"x250mm 1Socket set 3/8", 10-19mm, incl. bits 1 Set of U-wrench 1Socket, 16mm 1 U-wrench, 21-23mm 1Socket, 18mm 1 U-wrench, 24-27mm 1Spanner for 7/16 connector 1 Multimeter, kit 1Hexagon socket 8mm, 3/8" wrench 1 Torx bit, TT30 1Hexagon socket 4mm, 3/8" wrench 1 Static control wrist strap 1

Product Number Length mm Width mm Height mm Weight kgsLTT 601 137/1 430 150 320 6.70

Consists of:

Description Qty Description QtyTool case 1 Double flex wrench, 6 - 7mm 1First aid kit 1 Hexagon socket 8mm for 3/8" wrench 1Static control wrist strap 1 Hexagon socket 4mm for 3/8" wrench 1Penlight, mini with head band for lamp holding 1 Screwdriver for Bits 1Side cutting plier 8160 1 Screwdriver TORX no. 5 1

Screwdriver TORX no. 8 1Snip noce pliers 1 Screwdriver TORX no. 10 1Adjustable spanner l= 220mm 1 Screwdriver TORX no. 15 1Wire stripper 0,2-6,0mm 1 Screwdriver TORX no. 20 1RU-extractor handle, RU-extractor button 35mm 1 Screwdriver TORX no. 25 1Termination tool, Krone 1 Screwdriver TORX no. 30 1Tool for cable ties 1 Screwdriver, 0.4x2,5x60 1Slip joint plier 1 Slotted socket 27 / 32mm 1Extractor tool for QMA-connectors 1 Nutdriver 5mm ( L=150mm) 1Multimeter 1 Pen hammer 1Powercable tool (WCDMA) 1 Torx bit TT 30 1Socket set 3/8" 8-19mm, incl bits 1 Clutching tongs 1Socket 16mm for 3/8" wrench 1 Screwdriver TORX no.40 1Socket 18mm for 3/8" wrench 1

3030

Page 33: Ericsson Tools Catalogue

TOOLSQuality audit tool kitThe quality audit tool kit is especially designed to check the quality of the installation work at the site. Audits in an earthquake zone also requires Torque wrench LTT 601 141/1.

Special tool kitThis kit contains special tools for Ericsson RBS cabinets, designed to make it easier to install and maintain RBSs and avoid damaging parts.

1/2" - 7/8" Feeder preparation tool kit AndrewUsed to prepare feeder cable (Andrew) with sizes 1/2" and 7/8". The tools are required to obtain a quality installation of the connector and grounding. It includes tools to remove insulation, cut and polish the feeder end, spare blades and tape for temporary marking. The kit contains both hand tools and alternative machine driven tools that requires a power tool e.g. Screwdriver machine LTT 129 09/2.

1 1/4" Feeder preparation tool kit AndrewUsed to prepare feeder cable (Andrew) with sizes 1/2" and 7/8". The tools are required to obtain a quality installation of the connector and grounding. It includes tools to remove insulation, cut and polish the feeder end, spare blades and tape for temporary marking. The kit contains both hand tools and alternative machine driven tools that requires a power tool e.g. Screwdriver machine LTT 129 09/2.

Product Number Length mm Width mm Height mm Weight kgsLTT 601 150 600 200 150 6.10

Consists of:

Description Qty Description QtyBack pack, XL 38L 1 Torque wrench, Range 5-25 Nm 1First-aid kit 1 Socket 10mm 1Compass, 3 different magn. Zones MN, ME and MS.

1 Bit cassette, with different bits and holders 1

Binocular 8x21 1 Side cutting plier 1ESD Wrist-Strap 1 Electro tape L=20m, Black 1Measuring tape, L-3m 1 Self using tape 9m 1Electric-torch, Maglite mini 1 Adjustable spanner 1Spirit level, Length incl. Extension 700mm 1 Socket 13mm 1Screw driver 1

Product Number Length mm Width mm Height mm Weight kgsLTT 601 151/1 330 240 55 1.30

Consists of:

Description Qty Description QtyExtractor tool EMILY Shield 1 Extractor tool for IDM Connector 1Slotted Socket 27/32mm 1 Extractor Tool for QMA Connector 1Wrist strap Kit 1 Power Cable Tool 1RU-Extract Handle button 1 Instruction 1Spanner for angle connector 7/8", 32mm 1

Product Number Length mm Width mm Height mm Weight kgsLTT 601 143/1 450 300 110 6.60

Consists of:

Description Qty Description QtyTool Box 1 U-wrench 32mm 1Feeder preparation tool ½", hand operated 1 Hack-saw 1Feeder preparation tool 7/8", hand operated 1 Spare blade kit for hacksaw 10pcs 1Feeder trimming tool ½" machine operated 1 File, flat 1Feeder trimming tool 7/8", machine operated 1 Spare blade kit for feeder preparation tool 7/

8", hand operated2

Jacket removal tool for ½", feeder 1 Spare blade kit for feeder preparation tool ½" hand operated

1

Jacket removal tool for 7/8" feeder 1 Spare blade kit for feeder trimming tool ½" machine operated

1

Slip joint pliers 1 Spare blade kit for feeder trimming tool 7/8" machine operated

1

Cable knife 1 Marking tape, White 1Brass and fiber brush 1 Marking tape, Black 2U-wrench 19mm 1 Spare blade kit for jacket removal tools ½"

and 7/8"2

Product Number Length mm Width mm Height mm Weight kgsLTT 601 143/2 450 300 110 5.40

Consists of:

Description Qty Description QtyTool Box 1 Cable knife 1Feeder trimming tool 1 1/4", machine operated 1 Brass and fiber brush 1Spare blade kit for feeder trimmning tool 1 1/4" 1 Hack-saw 1Spare blade kit for jackjet removal tool 1 1/4" 1 Spare blade kit for hacksaw 10pcs 1Jacket removal tool for 1 1/4" feeder 1 File, flat 1U-wrench 48mm 1 Marking tape, White 1Slip joint pliers 1 Marking tape, Black 2

3131

Page 34: Ericsson Tools Catalogue

TOOLS1 5/8" Feeder preparation tool kit AndrewUsed to prepare feeder cable (Andrew) with sizes 1/2" and 7/8". The tools are required to obtain a quality installation of the connector and grounding. It includes tools to remove insulation, cut and polish the feeder end, spare blades and tape for temporary marking. The kit contains both hand tools and alternative machine driven tools that requires a power tool e.g. Screwdriver machine LTT 129 09/2.

1/2" - 7/8" Feeder preparation tool kit DrakaUsed to prepare feeder cable (Draka) with sizes 1/2" and 7/8".The tools are required to obtain a quality instal-lation of the connectorand grounding.It includes tools to remove insulation, cut and polish the feeder end, spare blades and tape for temporary marking.The kit containsboth hand tools and alternative machine driven tools that requires a power tool e.g. Screwdriver machine LTT 129 09/2.

1 1/4" Feeder preparation tool kit DrakaUsed toprepare feeder cable (Draka) with size 1 1/4" .Tools are required to obtain a quality installation of the connector and grounding.It includes tools to remove insulation, cut and polish the feeder end, spare blades, tape for temporary marking and saw guide for cutting the feeder in correct length. The kit contains machine driven tools that requires a power tool e.g. LTT 129 09/2.

1 5/8" Feeder preparation tool kit DrakaUsed to prepare feeder cable (Draka) with sizes 1/2" and 7/8".The tools are required to obtain a quality instal-lation of the connectorand grounding.It includes tools to remove insulation, cut and polish the feeder end, spare blades and tape for temporary marking.The kit containsboth hand tools and alternative machine driven tools that requires a power tool e.g. Screwdriver machine LTT 129 09/2.

Product Number Length mm Width mm Weight kgsLTT 601 143/3 515 390 6.60

Consists of:

Description Qty Description QtyTool Box 1 Cable knife 1Feeder trimming tool 1 5/8", machine operated 1 Brass and fiber brush 1Spare blade kit for feeder trimmning tool 1 5/8" 1 Hack-saw 1Jacket removal tool for 1 5/8" 1 Spare blade kit for hacksaw 10pcs 1Spare blade kit for jacket removal tool 1 5/8" 1 File, flat 1U-wrench 57mm 1 Marking tape, White 1Slip joint pliers 1 Marking tape, Black 2

Product Number Length mm Width mm Height mm Weight kgsLTT 601 155/1 450 300 110 5,900

Consist of:

Description Qty Description QtyTool Box 1 Grounding tool 1/2" 1Manual cutting tool 1/2", hand operated 1 Grounding tool 7/8" 3Manual cutting tool 7/8", hand operated 1 Slip joint plier 1Multi drilling tool 1/2", machine operated 1 Cable knife 1Multi drilling tool 7/8", machine operated 1 Brass and fiber brush 1Spare blade set 1/2", manual tool 1 U-wrench 19mm 1Spare blade set 7/8", manual tool 3 U-wrench 22-24mm 1Spare blade set 1/2", machine tool 1 U-wrench 30-32mm 1Spare blade set 7/8", machine tool 3 Hack saw 1

Product Number Length mm Width mm Height mm Weight kgsLTT 601 155/2 450 300 110 4.650

Consist of:

Description Qty Description QtyTool Box 1 Slip joint plier 1Multi Drilling tool 1 1/4" , machine operated 1 Cable knife 1Spare blade set 1 1/4", machine operated 1 Brass and fiber brush 1Grounding tool 1 1/4" 1 Hack saw 1Hock wrench 1 1/4" 1 Spare blade kit, hacksaw 10pcs 1Hock wrench for torque wrench 1 Saw guide for 1 1/4" connector 1

Product Number Length mm Width mm Height mm Weight kgsLTT 601 155/3 515 390 120 5,390

Consist of:

Description Qty Description QtyTool Box 1 Slip joint plier 1Multi drilling tool 1 5/8" machine operated 1 Cable knife 1Spare blade set 1 5/8" machine operated 1 Brass and fiber brush 1Grounding tool 1 5/8" 1 Hack saw 1Hook wrench 1 5/8" 1 Spare blade kitfor hack saw 10pcs 1Hook wrench 1 5/8" for torque wrench 1 Saw guide for 1 5/8" connector 1

3232

Page 35: Ericsson Tools Catalogue

TOOLS

Torque wrench tools

Torque wrench, 2.7 Nm for N-ConnectionWrench 13/16" with fixed torque.2,7 Nm

Torque wrench, 5 - 25 NmThe tool set is suitable for installations at RBS sites. The torque driver fixes equipment with the torque range 5 - 25 Nm.

Torque wrench, 0.5 - 4.0 NmThe Torque Wrench kit is suitable to tighten connectors, bolts and screws with the torque range 0.4 - 4.0 Nm.

Torque wrench, 0 - 10 Nm (WCDMA)A multi purpose tool suitable for tightening nuts or screws e.g. mounting the cabinet.The handle is equipped with a scale over the torque. 0 - 10 Nm

Torque wrench, 20 - 100 Nm (Basic)The torque wrench fixes equipment with the torque range 20 - 100 Nm.Easy to handle during to the installation work of the RBS site..

Battery torque wrench, 5 - 25 NmThe torque wrench fixes equipment with the torque range 20 - 100 Nm.

Product Number Length mm Width mm Height mm Weight kgsLSS 103 25/1 240 190 40 0.53

Product Number Length mm Width mm Height mm Weight kgsLTT 601 140/1 310 75 65 0.80

Consists of:

Description QtyTorque wrench, 5-25 Nm 1Bits head ¼" bits 1Socket adaptor ¼" to 3/8" 1Socket head ¼" - 13mm 1

Product Number Length mm Width mm Height mm Weight kgsLTT 601 145/1 250 100 40 0.70

Consists of:

Description Qty Description QtyTorque-driver, 0.5 - 4 Nm 1 U-key, 8 mm for SMA-connector 1Bits Torx, T8 x 50 mm 1 U-key, 14 mm for TNC-connector 1Bits Torx, T25 x 50mm 1 U-key, 18 mm for N-connector 1Socket set, 7 Sockets and 1socket adapter Bits to ¼" , L= 50 mm 4.0, 4.5, 5.0, 5.5, 6.0,7.0 and 8.0 mm

1

Product Number Length mm Width mm Height mm Weight kgsLTT 601 148/1 250 100 40 0.40

Consists of:

Description QtyTorque-wrench, 1/4", 0-10 Nm 1Bits head,1/4"-bits 1Socket, 7 mm 1Bits Torx, T30 x 75 mm 1

Product Number Length mm Width mm Height mm Weight kgsLTT 601 141/1 470 170 60 2.70

Consists of:

Description Qty Description QtyTorque wrench, 20 - 100 Nm 1 Socket, 16mm 1Ratchet head, 3/8" 1 Socket, 19mm 1Socket adaptor, 3/8" to ½" 1 Extension bar 1Socket, 24mm 1

Product Number Length mm Width mm Height mm Weight kgsLTT 601 157/1 275 35 35 0.400

Consists of:

Description QtyInsulated torque wrench, 5 - 25Nm with rectangular drive 9x12 for direct insertion of sockets

1

Insertion socket, 10mm 1Insertion socket, 13mm 1

3333

Page 36: Ericsson Tools Catalogue

TOOLSU-key set 27/32 mmTo avoid any damage to the antenna interfaces the U-key is used for installing the feederline connectors (7 - 16) together with a torque wrench. No torque wrench is included.Recommended tool: LTT 601 141/1 Torque Wrench, 20 - 100 Nm.

Consists of:

Open jaw wrenchFor tightening with socket tools, e.g. Torque wrench LTT 601 141/1.

Crimping tools

Grounding and Lightning protectionHydraulic Press tool with 60 kN press power for Cu connections. Use it to crimp cable lugs and C-clamps in the grounding and lightning system of the radio base station (RBS). If the tool is used correctly withEricsson supplied C-clamps, Cable Lugs or Jointing Sleeves an electrical connectionaccording to SEN 24510 or BS 4579:1 is achieved.Press tool for Cu connections. Use it to crimp cable lugs and C-clamps in thegrounding and lightning system of the radio base station (RBS). If the tool is usedcorrectly with Ericsson supplied C-clamps, Cable Lugs or jointing sleeves anelectrical connection according to SEN 24510 or BS 4579:1 is achieved.

Grounding and Lightning protection

Coaxial connectors, 50 and 70 ohmThis flexible hand tool connects BNC and TNC connectors to coaxial cable.

Product Number Length mm Width mm Height mm Weight kgsLTT 601 153/1 250 95 16 0.30

Description QtyU-key, 27mm 1U-key, 32mm 1

Product Number Description Weight kgsLSB 107 12/1 13mm 0.12LSB 107 12/2 19mm 0.16LSB 107 12/3 24mm 0.21LSB 107 12/4 27mm 0.23LSB 107 12/5 32mm 0.24

LSB 107 12/6 16mm 0.16LSB 107 12/7 17mm 0.16

Product Number Length mm Width mm Height mm Weight kgsLTT 601 89 460 190 60 4,30

Description för LTT 601 89 Qty

Crimping Tool Mechanical 10-95mm² for CU, 16-25mm² for stranded AL,and 35mm² for solid AL. C-clamps up to 50mm². 1Press Die TB 9-13 for conductor area 16mm² and 35mm² 1Press Die TB 11-C89 for conductor area 25mm² and C-clamp C89 1Pres Die TB 14.5-17 for conductor area 50mm² and 70mm² 1

Product Number Length mm Width mm Height mm Weight kgsLTT 601 86 550 200 45 5,60

Description för LTT 601 86 Qty

Crimping Tool Hydralic, 10-150mm² for CU, 16-25mm² for stranded AL,and 35mm² for solid AL. C-clamps up to 50mm². 1Press Die for C-clamp C4, C8, C9 and C89 1Press Die TB 8-17 for conductor area 10mm² and 70mm² 1Press Die TB 11-14.5 for conductor area 25mm² and 50mm² 1Press Die TB 9-13 for conductor area 16mm² and 35mm² 1Press Die TB 7-20 for conductor area 10mm² and 95mm² 1Press Die KB25for conductor area 150mm² 1

Product Number Length mm Width mm Height mm Weight kgsLTT 601 87 475 180 55 1.50

Consists of:

Description Qty Description QtyCrimping tool 1 Press die, red, size 1/2A 1Allen key 1 Press die, yellow, size 2C 1Press die, orange, size 2B 1 Press die, no colour, size >1/2A 1Press die, violet, size 3D 1

3434

Page 37: Ericsson Tools Catalogue

TOOLSOpto cable connectorsUsed when applying connectors to an optical cable.

Consists of:

Tool set for PCM cable, 75 ohmsCrimping tol set for PCM cables, consists of LTT 601 108 and LTT 601 16.

Consists of:

Plier set, DC cable, +24 VCrimping, DC Cable 24 V for Transmission

Consists of:

Connector and cable tools

Termination toolA tool commonly used within the public access net to create or remove cross connections in phone cabinets. The tool is fast to use if the trademark of the connection box is "Krone".

Extractor toolThe tool removes QMA-connections.

Clutching tongThis hand tool removes the power cable from the power magazine of the RBS. It is feasible for the models RBS 3202, RBS 3101, RBS 3402, RBS 3104, RBS 1130, RBS 1127 and RNC 3810.

Power-cable toolThe cable tool is suitable for releasing the cable from the connection /connector.

Product Number Length mm Width mm Height mm Weight kgsLTT 601 88 270 230 50 0.80

Description QtyStripping tool 1Pressing tool 1Polishing set 5

Product Number Length mm Width mm Height mm Weight kgsNTM 201 291 480 170 50 1.60

Description QtyCrimping, PCM Cable, 75 ¥ , inner conductor 1Crimping, PCM Cable, 75 ¥ , outer conductor 1

Product Number Length mm Width mm Height mm Weight kgsLTT 601 99/1 470 175 50 1.10

Description QtyCrimping tool 1Press die 1

Product Number Length mm Width mm Height mm Weight kgsLSH 901 45/1 200 52 35 0.10

Product Number Length mm Width mm Height mm Weight kgsLSY 901 38/1 113 19 40 0.08

Product Number Length mm Width mm Height mm Weight kgsLSY 901 48/1 200 20 20 0.18

Product Number Length mm Width mm Height mm Weight kgsLSY 901 42/1 150 20 5 0.03

3535

Page 38: Ericsson Tools Catalogue

TOOLS

Power tools

Hammer drill machine, 230 V ACThe hammer drill machine drills through, plastics, wood, plaster or even through concrete during the construc-tion work at the RBS site.

Hammer drill machine, cordless, 24 V DCThe hammer drill machine drills through, plastics, wood, plaster or even through concrete during the construc-tion work at the RBS site. This cordless hammer drill is delivered with one extra battery.

Screwdriver machine, 12 V DCFor common use when screwing and drilling. This cordless screwdriver is delivered with one extra battery.

Consists of:

Special Tools

Slotted socket, 27/32 mmUsed when connecting jumpers in the RBS cabinet.

Extractor tool for AIUThis hand tool will be used for extraction of an Antenna Interface Unit (AIU) in the WCDMA RBS cabinet.

Product Number Length mm Width mm Height mm Weight kgsLTT 601 146/1 450 250 190 8.50

Consists of:

Description Qty Description QtyTool box 1 Hammer Drill 5,5mm L=120mm, (60mm*) 2Hammer drill machine 230V AC 1 Hammer Drill 6mm L=120mm, (60mm*) 2Chuck holder 1 Hammer Drill 8mm L=160mm(100mm*) 2Chuck 2 - 13mm 1 Hammer Drill 10mm L=160mm(100mm*) 2Key 1 Hammer Drill 12mm L=160mm(100mm*) 2

Hammer Drill 20mm L=200mm(150mm*) 2* Max. drilling depth

Product Number Length mm Width mm Height mm Weight kgsLTT 601 147/1 500 140 390 10.90

Consists of:

Description Qty Description QtyTool Box 1 Hammer drill 5.5mm L=120mm, (60mm*) 2Hammer drill machine 1 Hammer drill 6mm L=120mm, (60mm*) 2Extra Battery, 3.0Ah 1 Hammer drill 8 mm L=160mm, (100mm*) 2Charger, 230V, AC 1 Hammer drill 10 mm L=160mm, (100mm*) 2Chuck 2-13 mm 1 Hammer drill 12mm L=160mm, (100mm*) 2Chuck Holder 1 Hammer drill 20mm L= 200mm, (150mm*) 2Key 1 Maintenance set 1

* Max. drilling depth

Product Number Length mm Width mm Height mm Weight kgsLTT 129 09/2 420 340 100 5.10

Description QtyScrewdriver machine cordless 12V DC 1Extra Battery, 2.8 Ah 1Charger, 230V, AC 1Drill set, D=1.5mm - 6.5mm 1

Product Number Length mm Width mm Height mm Weight kgsLSB 107 05/1 75 27 32 0.14

Product Number Length mm Width mm Height mm Weight kgsLSY 901 45/1 247 67 20 0.40

3636

Page 39: Ericsson Tools Catalogue

TOOLSRu-extractor handleTool used for removing ESD-sensitive printed board assembly from the cabinet.

Wrist strap kit, ESD protectionWrist strap to connect user with ground during work with ESD sensitive equipment.

Pre-compression toolThe Roxtec pre-compression tool is used during installation of Roxtec cable lead-in productsto compress the modules before installing the wedge. Stainless Steel

Spanner for angle connectors 7/16, 32 mmUse this hand tool to tighten 7/8". DIN 7/16 connectors in the Feeder system where the connector has a 90° angle and where the space is limited. Stainless Steel, SS2377.

Plate shareSelf opening non-slip, jaws for rapid cutting.Compound lever action handles heavy stock, even when cutting tight curves.Convenient, protective safety latch.Cuts straight up to 1.2mm mild steel.

Cable Tie TensionerTensioning BAND-IT Ties (steel) and Multi-Look.

Compasses

CompassCompass with Clinometer, type Northern Hemisphere (MN), type Equatorial (ME), type Southern Hemisphere (MS) .

RBS Installation and test

MultimeterInstrument for measurement of Voltage, Current and Resistance

Consists of:

Product Number Length mm Width mm Height mm Weight kgsLTD 901 43/1 100 100 20 0.03

Product Number Length mm Width mm Height mm Weight kgsLTT 601 136/1 100 100 30 0.04

Product Number Length mm Width mm Height mm Weight kgsLTD 260 154/1 340 80 40 0.7

Product Number Length mm Width mm Height mm Weight kgsLSB 107 30/1 75 55 45 0.07

Product Number Length mm Width mm Height mm Weight kgsLDK 3016 250 60 30 0.43

Product Number Length mm Width mm Height mm Weight kgsLSD 901 52/1 240 75 50 0.39

Product Number Length mm Width mm Height mm Weight kgsZTY 203 26/5, MN 155 110 50 0.14ZTY 203 26/6, ME 155 110 50 0.14ZTY 203 26/7, MS 155 110 50 0.14

Product Number Length mm Width mm Height mm Weight kgsLPK 102 024/3 185 90 43 0.42

Description QtyInstrument 1Test Leads 1Instruction Sheet 1Soft Case 1

3737

Page 40: Ericsson Tools Catalogue

TOOLSAntenna tester set, Bird Site analyzerThe Site Analyzer combines ease-of-use with powerful measurement and data analysis to help perform pre-dictive maintenance. Suitable to use in worldwide cellular and PCS/DCS systems, supporting measurements of CDMA, GSM, TDMA and AMPS modulation schemes. Other applications include 3G, broadcast, govern-ment, tactical military, microwave, paging, public safety, trunking, WLAN and WLL, and TETRA.Frequency Range: 25 MHz to 6 GHzRejects "On-Frequency" interference up to +13 dBmMaximum Input: +22 dBmPC software allows download to PC to analyze data for long-term assessment of system trends, problems, and performance.Trace overlays to track performance over timeSaves 15 Calibrated SetupsStores 500 traces at 238 pts of resolutionAlphanumeric labeling of saved tracesColor display is viewable in direct sunlight

Antenna tester set, accessoriesAccessories to Bird Site analyzer when measuring on antenna systems for Micro RBSs.

Consists of:

Antenna adjustment toolUse this tool to adjust the Azimuth angle of a panel antenna or sector antenna during installation.

Safety Equipment

Full Body Harness, Size S - XLThe full Body Harnesses is used to secure the worker during installation and maintenance on high altitude e.g. upon radio towers and roofs. The body harness is equipped with fixed D-ring to avoid neck damage by fall.

Tower work SetThis work set is intended for work in tower, mast and poles.

Product Number Length mm Width mm Height mm Weight kgsLPK 102 101/9 460 530 220 11.00

Consists of:

Description Qty Description QtyCalibration unit 7/16, open, short, load 1 Cord Europe 1Site Analyzer 25-6000MHz 1 Test cable (Nm-Nm) 1Calibration certificate 1 Case 1AC-charger 1 Precision Load 1CD- software 1 Adapter (Nf-Nf) 1Instruction Manual 1 Adapter 7/16female-7/16female 1Cable 9 pin 1 Adapter N female-7/16 male 1Automotive power adapter 1 Adapter N female-7/16 female 1

Product Number Length mm Width mm Height mm Weight kgsLPK 102 107/1 250 330 120 0.80

Description QtyTest Port Ext. Cable, N(m)-N(f), 3 m 1Standard N Type Load (f) 1Precision N(m) Open/Short/Load 1

Product Number Length mm Width mm Height mm Weight kgsLPB 112 101/1 452 327 100 3.00

Consist of:

Description QtyMain bracket 1Telescope 1Clamping device 1

Product Number Description Weight kgsLYB 921 53/1 Size, S-M 1.60LYB 921 53/2 Size, L-XL 1.70

Product Number Length mm Width mm Height mm Weight kgsLYA 175 115/1 570 350 250 5.60

Consists of:

Description Qty Description QtySupport line, white 2 Protection gloves, inner size L 2 pairTool/bolt bag 1 Protection gloves, outer size L 2 pairHelmet 1 Protection gloves, outer size XL 2 pairProtection goggles 1 Protection gloves, inner size XL 2 pairBag, 27L 1Blood stopper 1Fall arrester device and energy absorber 1

3838

Page 41: Ericsson Tools Catalogue

TOOLSWork line SetThis work line set is used for work in tower, mast, poles, roof and wall.

Safety line SetThis Safety Line Set is used as fall protection when permanent fall protection equipment is missing in the towwer, mast and roof.

Rescue line setThis kit is a rescue and evacuation set.

Lifting Equipment

Carrying bag for indoor RBSCarrying bag for RBS 2206 and RBS 3202

Lifting handle, PCB 02For Micro RBSs 2301, 2302, PBC-02

Carry to site

Product Number Length mm Width mm Height mm Weight kgsLYA 175 117/1 300 300 530 11.50

Consists of:

Description Qty Description QtySupport line, white 2 Protection gloves, inner size L 2 pairTool/bolt bag 1 Protection gloves, outer size L 2 pairHelmet 1 Protection gloves, outer size XL 2 pairProtection goggles 1 Protection gloves, inner size XL 2 pairBag, 27L 1Blood stopper 1Fall arrester device and energy absorber 1

Product Number Length mm Width mm Height mm Weight kgsLYA 175 118/1 570 350 250 9.00

Consists of:

Description QtyBag, volume 40L, orange 1Core-mantle rope 100 mFall arrester device 1Carabiner, big 1Lifting sling 1.5m 1

Product Number Length mm Width mm Height mm Weight kgsLYA 175 119/1 300 300 500 10.30

Consists of:

Description Qty Description QtyAntipodes rope, Red, 11.5mm 100m Shrinking Tube 2Express 25cm 1 Grillonrope,3m 1Lifting sling, 80cm 1 AMD Triact Autolock 1I’D 10-11,5mm 1 Mini Traxion 1Ball lock 1 G.O. No.7 carabiner 1AMD Tract Autolock 2 Block,Mini 2Rope Bag,Red 1

Product Number Length mm Width mm Height mm Weight kgsLYA 175 104/3 1900 480 630 10.00

Product Number Length mm Width mm Height mm Weight kgsSXK 107 5775/1 250 42 46 0.50

Product Number Length mm Width mm Height mm Weight kgsNTM 101 1055/1 400 300 300 1.00

3939

Page 42: Ericsson Tools Catalogue

40

TOOLS

Miscellaneous Equipment

Antenna system installation equipmentThe Basic Tool Antenna system installation is a kit mandatory by antenna installations onhigh elevation. The kit contains tools as well as basic climbing equipment.

Feeder jack standThe feeder jack stand to be used when winding off feeder cables from a cable drum, capacity up to 5 tons.

Step ladder, Combiflex 3.6 mFor multi purpose use.

Product Number Length mm Width mm Height mm Weight kgsLTT 601 142/1 820 375 340 23.00

Consists of:

Description Qty Description QtyBox 800 1 Self-Breaking descend device 1Pad lock 1 Rope lock 1Shackle M16-1, 5 tons FZ 3 Block 2Sling 0.6m, for feeder lifting 3 Cabiner, big 1Working Gloves L 2 Rope lock, left 1Working Gloves XL 2 Rope lock, right 1Tool for band-it cable ties 1 Adjustable Webbing foot loop 1String Diam 2.8mm L=10m 1 Connecting sling 0.6m, green 2Ring Key 13mm 3 Connecting sling 0.8m, green 2Socket (long) 13mm 1 Connecting sling 1.5m, red 2Socket (long) 16mm 1 Carbiners, screw lock 10Socket (long) 17mm 1 Bag 360x280 2Adaptor ¼" - 3/8" 1 Lifting line 125m, Ø10mm 1

Product Number Length mm Width mm Height mm Weight kgsLTT 601 97/2 2000 650 300 39.00

Consists of:

Description QtyStand, 5 tons hydraulic jack for handling heavy cable drums 2Tubular axle, L=2 m 1Stop collar 2

Product Number Length mm Width mm Height mm Weight kgsLYA 175 122/1 1000 360 260 8.00

40

Page 43: Ericsson Tools Catalogue

SITE FEEDER SYSTEMSite feeder systemRFA Feeder system products, Draka

RFA 1/2" Feeder Cable

RFA 7/8" Feeder Cable

RFA 1 1/4" Feeder Cable

RFA 1 5/8" Feeder Cable

RFA 7/8" Alu Feeder Cable

RFA 1 5/8" Alu Feeder Cable

Connectors for 1/2" RFA Cable

Connectors for 7/8" RFA Cable

Connectors for 1 1/4" RFA Cable

Connectors for 1 5/8" RFA Cable

Product Number Description Qty Tot Weight (kgs)

Bending radius (mm)

900 MHz

1800 MHz

2000 MHz

2200MHz

2600 MHz

FAB1022176/1 RFA 1/2" Fee-der Cable

500 176 120 6,85 10,0 10,7 11,3 12,4

Product Number Description Qty Tot Weight (kgs)

Bending radius (mm)

900 MHz

1800 MHz

2000 MHz

2200MHz

2600 MHz

FAB1022173/1 RFA 7/8" Fee-der cable

500 343 240 3,54 5,17 5,48 5,78 6,35

Product Number Description Qty Tot Weight (kgs)

Bending radius (mm)

900 MHz

1800 MHz

2000 MHz

2200MHz

2600 MHz

FAB1022175/1 RFA 1 1/4" Feeder Cable

600 735 350 2,70 4,03 4,29 5,54 5,03

Product Number Description Qty Tot Weight (kgs)

Bending radius (mm)

900 MHz

1800 MHz

2000 MHz

2200MHz

2600 MHz

FAB1022174/1 RFA 1 5/8" Feeder Cable

400 667 400 2,14 3,21 3,42 3,63 4,02

Product Number Description Qty Bending radius (mm)

900 MHz 1800 MHz

2000 MHz

2200MHz

2600 MHz

FAB 102 2513/1 RFA 7/8" Alu Feeder Cable

500 240 3,88 5,67 6,01 6,34 6,96

Product Number Description Qty Tot Weight (kgs)

Bending radius (mm)

900 MHz

1800 MHz

2000 MHz

2200MHz

2600 MHz

FAB 102 2514/1 RFA 1 5/8" Alu Feeder Cable

400 551 380 2,31 3,46 3,68 3,90 4,31

Product Number Description Weight (g)

Lenght (mm)

Widht (mm)

RPT899085/1 1/2" Connector 7/16 male for RFA cable 120 52 22RPT899104/1 1/2" Connector 7/16 male right angle for RFA cable 236 72 47RNT899091/1 1/2" Connector 7/16 female for RFA cable 120 54 26

Product Number Description Weight (g) Lenght (mm) Widht (mm)RNT899088/1 7/8" Connector 7/16 female for RFA cable 120 54 26RPT98730/1 7/8" Connector 7/16 male for RFA cable 174 53 35

Product Number Description Weight (g) Lenght (mm) Widht (mm)RNT899090/1 1 1/4" Connector 7/16 female for RFA cable 391 80 49RPT98732/1 1 1/4" Connector 7/16 male for RFA cable 403 80 49

Product Number Description Lenght(mm)

Widht (mm)

Weight (g)

RNT899089/1 1 5/8" Connector 7/16 female for RFA cable 79 59 563RPT98731/1 1 5/8" Connector 7/16 male for RFA cable 79 59 589

4141

Page 44: Ericsson Tools Catalogue

SITE FEEDER SYSTEMGrounding kitsGrounding kit for use with RFA feeder cables. IP 68 with a 0,6m grounding cable.

LDF-AVA Feeder system products, Andrew

LDF4 1/2" Feeder CableThe Feeder cable is halogen free according to IEC 754-2 and UV-resistant. Minimum bending radius data refers to repeated bending (guaranteed number of bends, minimum 15)Connector data: Connector insertion loss for mated connector pair, IL=0,1*üf(Ghz)Attenuation xxx MHz (dB/100m)

AVA5 7/8" Feeder Cable

AVA6 1 1/4" Feeder Cable

AVA7 1 5/8" Feeder Cable

3/8" LDF2 Fire Retardant Feeder Cable on drumThe feeder cable is UV-resistant, halogen free according to IEC 754-2 and fire retardant according to CATVR/UL 1666 (rise cable test) CATV/UL 1581 (vertical tray flame test), IEC 60 332-3 (vertical bunched cable), IEEE 383 (vertical tray flame test) CATVX/UL VW-1 (vertical wire flame test), IEC 60 332-1 (vertical single cable).The feeder cable is suitable for indoor and outdoor use.Minimum bending radius data refers to repeated bending (guaranteed minimum number of bends: 15)

1/2" LDF4 Fire Retardant Feeder Cable on drum Halogen free and fire retardent 1/2" corrugated copper cable with solid inneconductor.Cable is used as feeder cable for antennas.This article forms a part of a product with special approval. Changes may not beintroduced without previous confirmation by design responsible. Following requirementsmust fullfilled.1. UL approved according to 16662. Flame retardent according to: UL 1581.1080 VW1 and IEC 332-1

7/8" AVA5 Fire Retardant Feeder Cable on drumThe feeder cable is UV-resistant, halogen free according to IEC 754-2 and fire retardant according to CATVR/UL 1666 (rise cable test)CATV/UL 1581 (vertical tray flame test), IEC 60 332-3 (vertical bunched cable), IEEE 383 (vertical tray flame test) CATVX/UL VW-1 (verical wire flame test), IEC 60 332-1 (verical single cable).The feeder cable is suitable for indoor and outdoor use.Minimum bending radius data refers to repeated bending (guaranteed minimum number of bends: 15)

Product Number Description Weight (g)NGT90116/1 1/2" Grounding kit for RFA cable 222NGT90116/2 7/8" Grounding kit for RFA cable 237NGT90116/3 1 1/4" Grounding kit for RFA cable 247NGT90116/4 1 5/8" Grounding kit for RFA cable 267

Product Number Description Qty Weight kgs

Bending radius (mm)

900 Mhz

1800MHz

2000 MHZ

2200 MHz

2600 MHZ

FAB 102 579/01 LDF4 1/2" Feeder Cable 500 110 127 6,90 10,10 10,70 11,20 12,35

Product Number Description Qty Weight kgs

Bending radius (mm)

900 Mhz

1800MHz

2000 MHZ

2200 MHz

2600 MHz

FAB 102 943/1 AVA5 7/8" Feeder Cable 500 225 254 3,6 5,2 5,55 5,83 6,41

Product Number Description Qty Weight kgs

Bending radius mm

900 Mhz

1800MHz

2000 MHZ

2200 MHz

2600 MHz

FAB 102 2512/1 AVA6 1 1/4" Feeder Cable 400 272 254 2,70 3,96 4,21 4,45 4,90

Product Number Description Qty Weight kgs

Bending radius mm

900 Mhz

1800MHz

2000 MHZ

2200 MHz

2600 MHZ

FAB 102 990/1 AVA7 1 5/8" Feeder Cable 300m 300 381 2,15 3,2 3,4 3,6 3,92

Product Number Description Qty Weight kgsFAB 102 1044/02 Fire retardant 500m 60.00FAB 102 1044/05 Fire retardant 300m 36.00

Product Number Description Qty Weight kgsFAB 102 1044/01 1/2" Feeder cable UL/IEC 500m 110.00FAB 102 1044/04 1/2" Feeder cable 300m 72.00

Product Number Description Qty Weight kgsFAB 102 1943/1 Fire retardant 7/8" 500m 265FAB 102 1943/2 Fire retardant 7/8" 300m 157

4242

Page 45: Ericsson Tools Catalogue

SITE FEEDER SYSTEM1 5/8" AVA7 Fire Retardant Feeder Cable on drumThe feeder cable is UV-resistant, halogen free according to IEC 754-2 and fire retardant according to CATVR/UL 1666 (rise cable test)CATV/UL 1581 (vertical flame test), IEC 60 332-3 (vertical bunched cable), IEEE 383 (vertical tray flame test)CATVX/UL VW-1 (verical wire flame test), IEC 60 332-1 (vertical single cable).The feeder cable is suitable for indoor and outdoor use.Minimum bending radius data refers to repeated bending (guaranteed minimum number of bends: 15)

Connectors for feeder cable LDF2 3/8"Coaxial connectors male, type N, self flaring. The contact face dimentions are in accordence with N type in IEC 169-16. The O-ring make the connector waterproof when it is mounted to the cable. The inner contact has spring fingers and outer contact is self clamped.

Connectors for feeder cable LDF4 1/2"

Connectors for feeder cable AVA5 7/8"

Connectors for feeder cable AVA6 1 1/4"

Connectors for feeder cable AVA7 1 5/8"

AdaptersCoaxial adapters of N and 7/16. The contact face dimension are in accordance with N type in IEC 169-16 and 7/16 type in IEC 169-4.Environmental protection class IP68. The 7/16 type has an O-ring sealing and the N type has a gasket sealing.

Product Number Description Qty Weight kgsFAB 102 1944/1 Fire retardant 300m 360

Product Number Description Weight g Length mm Width mmRPT 403 179/01 N (m) Connector for 3/8" LDF2 feeder cable 90 55 24

Product Number Description Weight g Length mm Width mmRPT 899 078/1 7/16 (m) Connector R/A for 1/2" LDF4 167 83 42RPT 899 023/1 7/16 (m) Connector for 1/2" LDF4 feeder cable 175 68 36RPT 899 024/1 N (m) Connector for 1/2" LDF4 feeder cable 93 78 23RNT 980 02/1 7/16 (f) Connector for 1/2" LDF4 feeder cable 137 76 29RNT 899 065/1 N (f) Connector for 1/2" LDF4 feeder cable 117 111 23

Product Number Description Weight g Length mm Width mmRNT 899 101/1 7/16 (f) Connector for 7/8" AVA5 feeder cable 175 55 38RPT 987 33/1 7/16 (m) Connector for 7/8" AVA5 feeder cable 198 53 38RPT 987 35/1 N (m) Connector for 7/8" AVA5 feeder cable 180 64 38RNT 899 066/1 N (f) Connector for 7/8" AVA5 feeder cable 165 59 38

Product Number Description Weight g Length mm Width mmRNT 899 119/1 7/16(f) Connector for 1 1/4" AVA6 feeder cable 362 66 52RPT 987 37/1 7/16 (m) Connector for 1 1/4" AVA6 feeder cable 40 91 52

Product Number Description Weight g Length mm Width mmRNT 899 068/1 7/16 (f) Connector for 1 5/8" AVA7 feeder cable 772 98 63RPT 980 06/1 7/16 (m) Connector for 1 5/8" AVA7 feeder cable 775 98 63RNT 899 067/1 N (f) Connector for 1 5/8" AVA7 feeder cable 753 108 63RPT 987 25/1 N (m) Connector for 1 5/8" AVA7 feeder cable 768 115 63

Product Number Description Weight g Length mm Width mmRPT 403 180/01 Adapter N (f) - TNC (m). 41 39 17RPT 403 181/01 Adapter N (f) - 7/16 (m). 74 48 23RPT 403 182/01 Adapter N (m) - 7/16 (m) 116 43 35RPT 403 183/01 Adapter N (m) - N (m). 48 41 21RPT 899 89/1 Adapter N (m) - N (f), right angle. 74 38 33

4343

Page 46: Ericsson Tools Catalogue

SITE FEEDER SYSTEMGrounding kits 1/2"Grounding kit intended for grounding, shielding, shielding and sealing of coaxial feeder cables.Use toolkit LTT 601 143/1 for 1/2" and 7/8". LTT 601 143/2 for 1 1/4". LTT 601 143/3 for 1 5/8".

Grounding kits 7/8"

Grounding kits 1 1/4"

Grounding kits 1 5/8"

1/2" Jumper Cable FSJ4 (Angled), indoor and outdoor use

1/2" Jumper Cable 1.5 - 3.5 m (Angle) with 7/16 connectorsFSJ4RN-50B-S1, UV-resistant, fire retardant according to CATVR, (wiring in vertical runs), IEC 60 332-3-24C and recognised according to UL 1666, halogen free according to IEC 754-2.Diameter: 13,5 mmMinimum bending radius, repeted bending: 32 mmNumber of bends, minimum (typical): 20 (50).Attenuation, max value at 20í (dB) (including connector pair insertion loss, IL = 0.1*üf (GHzNote:For RBS 2250 and RBS 3106/3206 the jumper cables at the RBS shall have an angled 7-16(m) connector in one end. This also means that the standard 1/2" feeder cables with stright 7/16(m) connectors (without jum-per cables) cannot be used together with RBS 2250 and RBS 3106/3206.Use RPT 899 078/1 straight length.

1/2" Jumper Cable FSJ4 (Straight) indoor and outdoor use

1/2" Jumper Cable 1.0 - 10.0 m (Straight) with 7/16 connectorsFSJ4RN-50B-S1, UV-resistant, fire retardant according to CATVR, (wiring in vertical runs), IEC 60 332-3-24C and recognised according to UL 1666, halogen free according to IEC 754-2.Diameter: 13,5 mmMinimum bending radius, repeted bending: 32mmNumber of bends, minimum (typical): 20 (50).Note: For RBS 2250 and RBS 3106/3206 the jumper cables at the RBS shall have an angled 7/16 (m) connector in one end.This also means that standard 1/2" feeder cables with straight 7/16 (m) connectors (without jumper cables) cannot be used together with TBS 2250 and RBS 3106/3206. Use RPT 899 078/1.

Product Number Description Weight gNGT 901 09/1 1/2" Grounding kit for LDF4 cable 290

Product Number Description Weight gNGT 901 17/2 7/8" Grounding kit for AVA5 cable 360

Product Number Description Weight gNGT 901 09/3 1 1/4" Grounding kit for AVA6 cable 410

Product Number Description Weight gNGT 901 17/4 1 5/8" Grounding kit for AVA7 cable 500

Product Number Description Length m Weight kgsTSR 951 322/1 Coaxial jumper cable 1,5 0.50TSR 951 322/2 Coaxial jumper cable 2,5 0.70TSR 951 322/3 Coaxial jumper cable 3,5 1.00

Product Number Length m Weight kgsTSR 951 70/1 1 0.30TSR 951 70/2 2 0.50TSR 951 70/3 3 0.70TSR 951 70/10 10 2.30TSR 951 70/5 5 1.20

TSR 951 70/75 7,5 1.75

4444

Page 47: Ericsson Tools Catalogue

SITE FEEDER SYSTEM

1/4" Jumper Cable FSJ1 (Angled), indoor and outdoor use

1/4" Jumper Cable 1.5 - 3.5 m with 7/16 connectorsCable data:FSJ1RN-50B-S1, UV-resistant, fire retardant according to CATVR, (wiring in verical runs), IEC 60 332-3-24C and recognised according to UL 1666, halogen free according to IEC 754-2.Diameter: 7,4 mmMinimum bending radius repeted bending: 25mmNumber of bends, minimum (typical): 15 (20).Note:The 1/4" jumper cables will give reduced RF performance compared to the corresponding 1/2" jumper cable. For RBS 3116 it is recommended to choose the 1/4" jumper when optional Transmission are planned to be installed in the Cabinet. The 1/2" jumpers will give limited access to the Transmisson equipment if not the jumpers are disconnected from Filter unit first.For the RBS 3216 it is tecommended to choose 1/4" jumper when a second Cabinet is stacked on top of the first Cabinet and more than six jumper cables are exiting from the topmost Cabinet.

1/4" Jumper Cables with N connectorsCable data:1/4" FSJ1 is UV-resistant, halogen free according to IEC 754-2 and have fire retardant jacketing according to:CATVR/UL 1666 (riser cable test) Therefore, cables meeting this requirement can also be used in the folo-wing lower level catagories:CATV/UL 1581 (vertical tray flame test), IEC 60 332-3 (vertical bunched wires or cable), IEEE 383 (vertical tray flame test).CATVX/UL VW-1 (verical wire flame test), IEC 60 332-1 (vertical single wire or cable).The jumpers are suitable for indoor and outdoor use.Diameter: 7,4 mmMinimum bending radius: 25 mm (repeated bending, guaranteed minimum number of bends: 15).

Jumper Cable

1/2" Jumper Cables (Rosenberger)

Product Number Description Qty Length mTSR 951 1193/1 Coaxial jumper cable 1 1.5TSR 951 1193/2 Coaxial jumper cable 1 2.5TSR 951 1193/3 Coaxial jumper cable 1 3.5

Product Number Description Length m Weight kgsTSR 951 103/1 Jumper N male - N male 1,5 0.17TSR 951 103/2 Jumper N male - N male 2.5 0.20TSR 951 103/3 Jumper N male - N male 3.5 0.27TSR 951 101/01 Jumper N maile - N female 0.5 0.22TSR 951 101/02 Jumper N maile - N female 1.0 0.25

TSR 951 101/03 Jumper N maile - N female 2.0 0.27

Product Number Typbeteckn. Description Length m

Cable dia-meter

Weight

TSR951332/2 LC08-201-2000 ½“ jumper cable, 7-16 female / 7-16 male

2 13,5mm 0,56kg

TSR951332/3 LC08-201-3000 ½“ jumper cable, 7-16 female / 7-16 male

3 13,5mm 0,76kg

TSR951331/1 LC08-198-1000 ½“ jumper cable, 7-16 male / 7-16 male

1 13,5mm 0,36kg

TSR951331/2 LC08-198-1000 ½“ jumper cable, 7-16 male / 7-16 male

2 13,5mm 0,56kg

TSR951331/3 LC08-198-3000 ½“ jumper cable, 7-16 male / 7-16 male

3 13,5mm 1,15kg

TSR951333/1 LC08-199-1500 ½” jumper cable, 7-16 male/7-16 right angle male

1,5 13,5mm 0,49kg

TSR951333/2 LC08-199-2500 ½” jumper cable, 7-16 male/7-16 right angle male

2,5 13,5mm 0,67kg

TSR951333/3 LC08-199-3500 ½” jumper cable, 7-16 male/7-16 right angle male

3,5 13,5mm 0,86kg

TSR951334/2 - Jumper 7/16 female - 7/16 male RA 2.5 - 0,40TSR951334/3 - Jumper 7/16 female - 7/16 male RA 3.5 - 0,48

TSR951331/5 LC08-198-5000 ½“ jumper cable, 7-16 male / 7-16 male

5 13,5mm 1,15kg

4545

Page 48: Ericsson Tools Catalogue

SITE FEEDER SYSTEM

Feeder system accessories

Shrink sleeve, 1/2", 13.5 mm - 39 mm Lenght 150mmCoaxial connector sealing kit. Cold shrink termination for sealing of N-connectors or7-16 DIN connectors to ½” or 7/8” jumper cable.The termination outer layer tube provides weather-resistance and sealing over the cable and connector.The termination inner layer tube provides reinforced mechanical protection during handling of the prepared cable over the connector area. The installation shall be done in one single operation without the utilization of additional tools and/or components for the weather-resistance and sealing over the cable and connector. The space, around the connection axis, needed for installation shall be within the value indicated on table below. The sealing outer surface shall be continuing without interruptions or overlapping.

Shrink sleeve, 1/2", 7/8" 13.5 - 39 mm Lenght 300 mmCoaxial connector sealing kit. Cold shrink splice for sealing of N-connectors or 7-16 DINconnectors for junc-tion between ½. to ½. or ½. to 7/8. coaxial cables.The splice outer layer tube provides weather-resistance and sealing over the cable and connector. The splice inner layer tube provides reinforced mechanical protection during handling of the prepared cable over the connector area.The installation shall be done in one single operation without the utilization of additional tools and/or compo-nents for the weather-resistance and sealing over the cable and connector. The space, around the connec-tion axis, needed for installation shall be within the value indicated on table below. The sealing outer surface shall be continuing without interruptions or overlapping.

Feeder system marking for GSMLabel blocks packed in a plastic bag marked NTM 201 207/1

Feeder system marking for WCDMA, LTEMarking of antenna system för WCDMA/LTE system.

Generic marking kitIdentify and separate your indoor equipment, cable or fiber with this label kit.It marks 100 cables with a maximum diameter of 47,5 mm.

Sealing Set Use this sealing set to seal a splice in the RF system on a Telecom site. It protects the splice against vibra-tions, moisture and dust. Designed for feeder sizes 1/2", 7/8", 1-5/8", 1-1/4". This kit can be used to seal already installed equipment.

Product Number Length mm Width mm Height mm Weight kgsMPB 134 01/1 150 43 56 0.08

Product Number Length mm Width mm Height mm Weight kgsMPB 134 02/1 300 43 56 0.18

Product Number Length mm Width mm Height mm Weight kgsNTM 201 207/1 100 100 4 0.10

Consists of:

Description Qty Description QtyLabel sheet (Cell A:) 2 Label sheet (TX1) 1Label sheet (Cell B:) 2 Label sheet (TX2) 1Label sheet (Cell C:) 2 Label sheet (TX3) 1Label sheet (Cell O:) 2 Label sheet (RXA) 1Label sheet (DX1) 1 Label sheet (RXB) 1Label sheet (DX2) 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 2964/1 135 130 20 0.05

Consists of:

Description Qty Description QtyLabel sheet (Sector 1:) 1 Label sheet (A:) 1Label sheet (Sector 2:) 1 Label sheet (B:) 1Label sheet (Sector 3:) 1 Label sheet (C:) 1Label sheet (Sector 4:) 1 Label sheet (D:) 1Label sheet (Sector 5:) 1Label sheet (Sector 6:) 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 3887/1 100 100 30 0,250

Consists of:

Description QtyMarking plates (90x19mm) 100Cable tie lenght 150 mm) 200Marking pen 1

Product Number Length mm Width mm Height mm Weight kgsNTM 201 2426 310 220 150 0,30

Consists of:

Description QtyTape, self-fusing, l=9.15 m; w=19 mm 1Electrotape PVC, l=20.1 m; w=19 mm 1

4646

Page 49: Ericsson Tools Catalogue

SITE FEEDER SYSTEM

Feeder clampsFeeder clamp Clamp for securing feeder cableIncludes cable socket, adapter, screw, threaded rod M8, nut and washer.

Feeder Clamps for 1/2" Cable

Feeder Clamps for 7/8" Cable

Feeder Clamps for 1 1/4" Cable

Feeder Clamps for 1 5/8" Cable

Cable Clamps for 7,2mm, 10mm, 14mmCable

3 Sector Clamp 1/2"The 1/2" (16 +/-1mm) clamp is designed to secure 1 to 6 feeder cables at any telecomsite. Clamp it up on cable ladder, rung, bracket, I-beam, profile lattice mast etc.Requires only standard tools and is easy to mount and handle. It withstands windspeeds up to 60 m/s. The protected design prevents damage of feeder even if over-torqueat assembly is used. Recommended clamping distance is max 0.8 meter. TheU-bar has a width of opening of 20 +/-0.5 mm. ROHS compliant.

Product Number Description Qty Weight kgsNTM 201 215/1 Feeder clamp 1/2 "x 1 1 0.17NTM 201 215/2 Feeder clamp 1/2 "x 2 1 0.20NTM 201 215/3 Feeder clamp 1/2 "x 3 1 0.23NTM 201 215/4 Feeder clamp 1/2 "x 4 1 0.27

Product Number Description Qty Weight kgs6/NTM 201 230/1 Feeder clamp 7/8 "x 1 1 0.196/NTM 201 230/2 Feeder clamp 7/8 "x 2 1 0.246/NTM 201 230/3 Feeder clamp 7/8 "x 3 1 0.296/NTM 201 230/4 Feeder clamp 7/8 "x 4 1 0.36

Product Number Description Qty Weight kgs6/NTM 201 230/13 Feeder clamp 1-1/4"x1 1 0.226/NTM 201 230/14 Feeder clamp 1-1/4"X2 1 0.30

Product Number Description Qty Weight kgs6/NTM 201 230/11 Feeder clamp 1 5/8"X1 1 0.226/NTM 201 230/12 Feeder clamp 1 5/8"X2 1 0.33

Product Number Cable clamp type Cable For cable6/NTM 201 230/51 7,2mmx1 ¨ 7,2mm 16/NTM 201 230/52 7,2mmx2 ¨ 7,2mm 26/NTM 201 230/53 7,2mmx3 ¨ 7,2mm 36/NTM 201 230/54 7,2mmx4 ¨ 7,2mm 46/NTM 201 230/41 10mmx1 ¨ 10mm 1

6/NTM 201 230/42 10mmx2 ¨ 10mm 26/NTM 201 230/43 10mmx3 ¨ 10mm 36/NTM 201 230/44 10mmx4 ¨ 10mm 46/NTM 201 230/61 14mmx1 ¨ 14mm 16/NTM 201 230/62 14mmx2 ¨ 14mm 2

6/NTM 201 230/63 14mmx3 ¨ 14mm 36/NTM 201 230/64 14mmx4 ¨ 14mm 4

Product NumberNTM 201 1210/1

Consist of

Description QtyPlastic clamp 2 x ½” 3U-bar ,t=5mm 1Threaded rod M6 1Hex cap screw 1Flange nut 2

4747

Page 50: Ericsson Tools Catalogue

SITE FEEDER SYSTEM3 Sector Clamp 7/8"The 7/8" (28 +/-1mm) clamp is designed to secure 1 to 6 feeder cables at any telecomsite. Clamp it up on cable ladder, rung, bracket, I-beam, profile lattice mast etc.Requires only standard tools and is easy to mount and handle. It withstands wind speeds up to 60 m/s. The protected design prevents damage of feeder even if overtorque at assembly is used. Recommended clam-ping distance is max 0.8 meter. The U-bar has a width of opening of 20 +/-0.5 mm. ROHS compliant.

Feeder clamps with holderStackable feeder clamp for 7/8" feeder cable.

Feeder grounding

DC power cable groundingA grounding kit that is suitable for grounding of 12-30 mm coaxial cables andshielded power cables such as the DC power cable for the RRU. Waterproof sealing.

Grounding for CU feeder Feeder cable Grounding KIT 7/8 Cu – QuickGripSelf connected Grounding kit where no tool is needed for the assembly. The Quickgrip knife design of the clamp-to-the-cable connection cuts into the feeder cable without affecting its performance. IP-67 In / outdoor environments. (not approed for aluminum feeder).

Product Number Length mm Width mm Higth mm Weight kgsNTM 201 1211/1 185 85 50 0,310

Consist of:

Description QtyPlastic clamp 2x7/8” 3U-bar ,t=5mm 1Threaded rod M6 1Hex cap screw M8x30 1Hex flange nut M6 2

Product Number Description QtyNTM 201 1212/1 - -NTM 201 1212/2 - -

Consist of:

NTM 201 1212/1 NTM 201 1212/2Description Qty Description QtyC-Holder 1 Holder 1Nut M8 2 Cable clamp 7/8" 4Screw M8 1Screw M8 1Cable clamp 7/8" 4

Product Number Length mm Width mm Higth mm Weight kgsNGT 901 21/1 200 180 30 0,161

Consist of:

Description QtyContact bar ½., 3/8., 5/8. 7/8 1Copper mesh 1Socket head cap 1Self-amalgating tape 2Cable assembly 500mm, 16 mm² 1Cable lug Ø = 8 , 16 mm² 2

Product NumberNGT 901 20/2

Consist of:

Description Qty7/8. Universal Feeder Grounding 1Hexagon bolt M8x25 2Hexagon nut M8 2Spring washer M8 4Knife feeder clamp 16mm² cable 0,6M 1Cable lug 1

4848

Page 51: Ericsson Tools Catalogue

DISTRIBUTION FRAMEDistribution frame OVP-PCM-module kit for RBS2106

DF-OVP for GSM RBSThe over voltage protection distribution frame (DF-OVP) is an interface foralarm, PCM, ESB and GPS cables at the Radio Base station Site (RBS).It is designed for indoor mount on wall or in a 19" rack. The transparent cover enables inspection.One of the two or both configurations are possible-2 DIN-rail mounted transmission OVP:s of type NCD 901 26-6 Din-rail mounted alarm OVP:s of type NFD 302 34/08Product Number DescriptionNBA 101 22/1 16 external alarmsNBA 101 22/2 16 external alarms, 4 PCM systems 100/12 ohmNBA 101 22/3 16 external alarms, 4 PCM systems 75 ohmNBA 101 22/4 8 external alarms, 2 PCM systems 100/120 ohmNBA 101 22/5 8 external alarms, 2 PCM systems 75 ohm

Product Number Length mm Width mm Height mm Weight kgsNBA 101 22/1 540 280 260 5.29NBA 101 22/2 540 280 260 7.86NBA 101 22/3 540 280 260 7.99NBA 101 22/4 540 280 190 6.058NBA 101 22/5 540 280 260 5.996

5049

Page 52: Ericsson Tools Catalogue

POWER BACK-UPPower Back-upBattery 2106I

Battery 2106I 100 AhBattery set for RBS 2016iUse the batteries as backup power for GSM RBS 2106 . The battery has a nominal output voltage of +24 V DC and 100 Ah.

Battery 2106I 200 AhBattery set for RBS 2016iUse the batteries as backup power for the GSM RBS 2106i. The battery has a nominal output voltage of +24 V DC and 200 Ah.

Battery 2106I 300 AhBattery set for RBS 2016iUse the batteries as backup power for the GSM RBS 2106. The battery has a nominal output voltage of +24 V DC and 300 Ah.

Battery 2106V3

Battery 2106V3 100 AhBattery Set for RBS 2106V3The batteries are to be used for the GSM RBS 2106V3 as backup power. The battery has a nominal output voltage of +24 V DC and 100 Ah.

Battery 2106V3 200 AhBattery Set for RBS 2106V3The batteries are to be used for the GSM RBS 2106V3 as backup power. The battery has a nominal output voltage of +24 V DC and 200 Ah.

Battery 2106V3 300 AhBattery Set for RBS 2106V3The batteries are to be used for the GSM RBS 2106V3 as backup power. The battery has a nominal output voltage of +24 V DC and 300 Ah.

Product Number Length mm Width mm Height mm Weight kgsBKC 901 06/037 380 210 390 70.50

Consists of:

Description QtyBattery 12V 2Battery Accessory kit 1

Product Number Length mm Width mm Height mm Weight kgsBKC 901 06/038 380 416 390 139.50

Consists of:

Description QtyBattery 12V 4Battery Accessory kit 1

Product Number Length mm Width mm Height mm Weight kgsBKC 901 06/039 380 629 390 207.00

Consists of:

Description QtyBattery 12V 6Battery Accessory kit 1

Product Number Length mm Width mm Height mm Weight kgsBKC 901 06/035 380 208 390 103.50

Consists of:

Description QtyBattery 12V 2Battery Accessory kit 1

Product Number Length mm Width mm Height mm Weight kgsBKC 901 06/034 380 208 390 139.50

Consists of:

Description QtyBattery 12V 4Battery Accessory kit 1

Product Number Length mm Width mm Height mm Weight kgsBKC 901 06/036 380 629 390 208.50

Consists of:

Description QtyBattery 12V 6Battery Accessory kit 1

5150

Page 53: Ericsson Tools Catalogue

POWER BACK-UPBattery Accessory set, OtherSpare parts Accessory kits

Battery 6/BKC 901 06/0098

Battery Kit 48V/98AhBattery Kit for PBC 6500

Battery Kit 24V/196AhBattery Kit for PBC 6500

Battery Kit 48V/98AhBattery Kit for BBS4500

Battery Kit 24V/196AhBattery Kit for BBS4500

Battery Kit 24V/98AhBattery Kit for BBS2x16

Battery Kit 48V/98AhBattery Kit for BBS2x16

Product Number Length mm Width mm Height mm Weight kgsBKY 901 13/16 450 405 75 1.00BKY 901 13/17 450 405 75 1.00BKY 901 13/18 450 405 75 1.00

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/041 800 300 500 155,154

Consist of:

Description QtyBattery Block 98 Ah 4Accessory kit 48V/98Ah 1

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/043 800 300 500 155,414

Consist of:

Description QtyBattery Block 98Ah 4Accessory kit 24V/196Ah 1

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/053 800 300 500 155,381

Consist of:

Description QtyBattery Block 98Ah 4Asseccory kit 48V/98Ah 1

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/054 800 300 500 155,641

Consist of:

Description QtyBattery Block 98Ah 4Accessory kit 24V/196Ah 1

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/069 800 300 500 84,036

Consist of:

Description QtyBattery Block 98Ah 2Accessory kit 24v/98Ah 1

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/070 800 300 500 152,843

Consist of:

Description QtyBattry Block 98Ah 4Accessory kit 48v/98Ah 1

5251

Page 54: Ericsson Tools Catalogue

POWER BACK-UPBattery Kit 24V/196AhBattery Kit for BBS2x16

Battery Kit 48V/98AhBattery Kit for BBS8500

Battery Kit 24V/196AhBattery Kit for BBS8500

Battery Kit 48V/98AhBattery Kit for BBS8500

Battery Kit 24V/196AhBattery Kit for BBS8500

Battery Kit 48V/98AhBattery Kit for BBS6201/PBC6200

Front connector adaptor kitThis adapter kit is used for front connection of battery blocks.All connections are dimensioned to withstand normal operating currents as well as possible battery short circuit currents. Minimum approval for electrical insulation is 500 VAC RMS.

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/071 800 300 500 155,583

Consist of:

Description QtyBattery Block 98Ah 4Accessory kit 24V/196Ah 1

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/072 800 300 500 152,478

Consist of:

Description QtyBattery Block 98Ah 4Accessory kit 48V/98Ah 1Gas collecting kit 1

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/073 800 300 500 152,602

Consist of:

Description QtyBattery Block 98Ah 4Accessory kit 24V/196Ah 1Gas collecting kit 1

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/095 800 300 500 151.025

Consist of:

Description QtyBattery Block 98Ah 4Accessory kit 48V/98Ah 1Gas colleting kit 1

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/096 800 300 500 154.367

Consist of:

Description QtyBattery Block 98Ah 4Accessory kit 24V/196Ah 1Gas collecting kit 1

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 61/2 800 300 500 155.200

Consist of:

Description QtyBattery Block 98Ah 4Accessory kit 48V/98Ah 1

Product number Length/mm Width/mm Height/mm Weight/kgsNTM 101 1779/1 150 100 50 0,2

Consist of:

Description QtyTerminal adapter 2M8 Nut, 2Washer M8 2Insulation cover 2

5352

Page 55: Ericsson Tools Catalogue

POWER BACK-UP

Battery 6/BKC 901 060/100Battery set 24V/200AhBattery Set for PBC 6500.

Battery set 24V/200AhBattery Set for BBS 8500 (New sale)

Battery Set 48V/100AhBattery Set forPBC 6500.

Battery Set 48V/100AhBattery Set for BBS 8500 (Upgrade)

Battery Set 48V/100AhBattery Set for BBS 8500 (Upgrade)

Battery Set 48V/100AhBattery Set for PBC 6200, BBS 6201, BBS6102 and BBU 6102

Battery Set 24V/100AhBattery Set for BBS 2216, V2

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/102 800 500 500 144,4

Consist of:

Description BKC 901 06/106 QtyBattery Block 6/BKC 901 06/0101 4Accessory kit BKY 901 13/101 1

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/106 800 500 500 144,4

Description BKC 901 06/102 QtyBattery Block 16/BKC 901 06/0101 4Accessory kit 24V/200Ah BKY 901 13/107 1Gas collection kit BKY 901 44/1 1

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/101 800 300 500 144,4

Consist of:Description QtyBattry Block 6/BKC 901 06/0101 4Accessory kit BKY 901 12/101 1Gas collection kit BKY 901 44/1 1

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/105 800 300 500 144,4

Consist of:Description QtyBattry Block 6/BKC 901 06/105 4Accessory kit BKY 901 12/106 1Gas collection kit BKY 901 44/1 1

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/103 800 300 500 144,4

Consist of:Description QtyBattery Block 6/BKC 901 06/101 4Accessory kit BKY 901 12/102 1Gas collection kit BKY 901 44/1 1

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/121 800 300 500 144,4

Consist of:Description QtyBattery Block 6BKC 901 06/121 4Accessory kit BKY 901 12/120 1

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/111 800 300 500 79,2

Consist of:

Description QtyBattery Block 6/BKC 901 06/0101 2Accessory kit BKY 901 13/103 1

5453

Page 56: Ericsson Tools Catalogue

POWER BACK-UPBattery Set 24V/200AhBattery Set for BBS 2216, V2

Battery Set 24V/380Ah 48V/190AhBattery Set for BBU 9500i

Battery Set 48V/190AhBattery Set for PBC 6200, BBS 6201, BBS 6102 and BBU 6102

Battery Set 48V/100AhBattery Set for BBS 2216, V2

Battery Set 24V/200AhBattery Set for BBS 8500 (Upgrade)

Battery Unit, BU 2U-01

Battery Unit 48V/175Ah

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/113 800 300 500 144,4

Consist of:

Description QtyBattery Block 6/BKC 901 06/0101 4Accessory kit BKY 901 13/104 1

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/115 800 300 500 260,5

Consist of:

Description QtyBattery block 6/901 06/0190 4Accessory kit BKY 901 12/105 1Gas collection kit BKY 901 44/2 1

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/123 800 300 500 260,5

Consist of:

Description QtyBattery Block 6/BKC 901 06/0190 4Accessory kit BKY 901 12/100 1

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/112 800 300 500 144,4

Consist of:

Description QtyBattery Block 6/BKC 901 06/0101 4Accessory kit BKY 901 12/103 1

Product number Length/mm Width/mm Height/mm Weight/kgsBKC 901 06/104 800 300 5002 144,4

Consist of:

Description QtyBattery Block 6/BKC 901 06/0101 4Accessory kit BKY 901 13/102 1Gas collection kit BKY 901 44/1 1

Product number Length/mm Width/mm Height/mm Weight/kgsBKB 902 57/2 510 660 290 33.000

5554

Page 57: Ericsson Tools Catalogue

ERICSSON NUMBER REGISTER

Numeric4/NTM 201 201/3 ...... 135/NTM 201 201/2 ...... 135/NTM 201 201/3 ...... 135/NTM 201 201/4 ...... 136/NTM 201 230/1 ...... 476/NTM 201 230/11 .... 476/NTM 201 230/12 .... 476/NTM 201 230/13 .... 476/NTM 201 230/14 .... 476/NTM 201 230/2 ...... 476/NTM 201 230/3 ...... 476/NTM 201 230/4 ...... 476/NTM 201 230/41 .... 486/NTM 201 230/42 .... 486/NTM 201 230/43 .... 486/NTM 201 230/44 .... 486/NTM 201 230/51 .... 486/NTM 201 230/52 .... 486/NTM 201 230/53 .... 486/NTM 201 230/54 .... 486/NTM 201 230/61 .... 486/NTM 201 230/62 .... 486/NTM 201 230/63 .... 486/NTM 201 230/64 .... 487/NTM 201 201 ......... 229/NTM 201 230/1 ...... 149/NTM 201 230/2 ...... 149/NTM 201 230/4 ...... 14BBKB 902 57/2............ 55BKC 901 06/034........ 51BKC 901 06/035........ 51BKC 901 06/036........ 51BKC 901 06/037........ 51BKC 901 06/038........ 51BKC 901 06/039........ 51BKC 901 06/041........ 52BKC 901 06/043........ 52BKC 901 06/053........ 52BKC 901 06/054........ 52BKC 901 06/069........ 52BKC 901 06/070........ 52BKC 901 06/071........ 53BKC 901 06/072........ 53BKC 901 06/073........ 53BKC 901 06/095........ 53BKC 901 06/096........ 53BKC 901 06/101........ 54BKC 901 06/102........ 54BKC 901 06/103........ 54BKC 901 06/104........ 55BKC 901 06/105........ 54BKC 901 06/106........ 54BKC 901 06/111........ 55BKC 901 06/112........ 55BKC 901 06/113........ 55BKC 901 06/115........ 55BKC 901 06/121........ 54BKC 901 06/123........ 55BKC 901 61/2............ 53BKY 901 13/16.......... 52BKY 901 13/17.......... 52BKY 901 13/18.......... 52FFAB 102 1044/01 ...... 42FAB 102 1044/02 ...... 42FAB 102 1044/04 ...... 42FAB 102 1044/05 ...... 42FAB 102 1943/1 ........ 43FAB 102 1943/2 ........ 43FAB 102 1944/1 ........ 43FAB 102 2512/1 ........ 42

FAB 102 2513/1 ........ 41FAB 102 2514/1 ........ 41FAB 102 579/01 ........ 42FAB 102 943/1 .......... 42FAB 102 990/1 .......... 42FAB1022173/1 .......... 41FAB1022174/1 .......... 41FAB1022175/1 .......... 41FAB1022176/1 .......... 41LLDK 3016 .................. 37LPB 112 101/1 .......... 38LPB 112 102/1 .......... 27LPK 102 024/3 .......... 37LPK 102 101/9 .......... 38LPK 102 107/1 .......... 38LPK 102 111/1 .......... 29LSB 107 05/1 ............ 36LSB 107 12/1 ............ 34LSB 107 12/2 ............ 34LSB 107 12/3 ............ 34LSB 107 12/4 ............ 34LSB 107 12/5 ............ 34LSB 107 12/6 ............ 34LSB 107 12/7 ............ 34LSB 107 30/1 ............ 37LSD 901 52/1 ............ 37LSH 901 45/1 ............ 35LSS 103 25/1 ............ 33LSY 901 38/1 ............ 35LSY 901 42/1 ............ 35LSY 901 45/1 ............ 36LSY 901 48/1 ............ 35LTD 260 154/1 .......... 11LTD 260 154/1 .......... 37LTD 901 43/1 ............ 37LTT 129 09/2............. 36LTT 601 135/1........... 30LTT 601 136/1........... 37LTT 601 137/1........... 30LTT 601 140/1........... 33LTT 601 141/1........... 33LTT 601 142/1........... 40LTT 601 143/1........... 31LTT 601 143/2........... 31LTT 601 143/3........... 32LTT 601 145/1........... 33LTT 601 146/1........... 36LTT 601 147/1........... 36LTT 601 148/1........... 33LTT 601 150.............. 31LTT 601 151/1........... 31LTT 601 152/1............. 8LTT 601 153/1........... 34LTT 601 154/1........... 28LTT 601 155/1........... 32LTT 601 155/2........... 32LTT 601 155/3........... 32LTT 601 156/1........... 30LTT 601 86................ 34LTT 601 87................ 34LTT 601 88................ 35LTT 601 89................ 34LTT 601 97/2............. 40LTT 601 99/1............. 35LYA 175 104/3 .......... 39LYA 175 107/1 .......... 40LYA 175 115/1 .......... 38LYA 175 117/1 .......... 39LYA 175 118/1 .......... 39LYA 175 119/1 .......... 39LYA 175 122/1 .......... 40LYB 921 53/1 ............ 38LYB 921 53/2 ............ 38

MMPB 134 01/1 ........... 46MPB 134 02/1 ........... 46NNBA 101 22/1............ 50NBA 101 22/2............ 50NBA 101 22/3............ 50NBA 101 22/4............ 50NBA 101 22/5............ 50NCD 901 37/1 ........... 28NCF 901 03/1............ 28NCF 901 03/2............ 28NDM 902 025/1 ......... 29NGC 901 42/1 R1A ... 49NGC 901 42/2 R1A ... 49NGC 901 42/3 R1A ... 49NGT 901 09/1............ 44NGT 901 09/3............ 44NGT 901 17/2............ 44NGT 901 17/4............ 44NGT 901 20/2............ 49NGT 901 21/1............ 28NGT 901 21/1............ 49NGT90116/1.............. 42NGT90116/2.............. 42NGT90116/3.............. 42NGT90116/4.............. 42NTM 101 1055/1 ....... 39NTM 101 1779/1 ....... 54NTM 201 1205/1 ....... 21NTM 201 1210/1 ....... 48NTM 201 1211/1 ....... 48NTM 201 1212/1 ....... 48NTM 201 1212/2 ....... 48NTM 201 1491/1 ....... 22NTM 201 207/1 ......... 46NTM 201 215/1 ......... 47NTM 201 215/2 ......... 47NTM 201 215/3 ......... 47NTM 201 215/4 ......... 47NTM 201 218/3 ......... 23NTM 201 218/5 ......... 23NTM 201 219/1 ......... 16NTM 201 2413/1 ....... 23NTM 201 2426 .......... 47NTM 201 257 ............ 23NTM 201 291 ............ 35NTM 201 2964/1 ....... 47NTM 201 2977/1 ....... 22NTM 201 2977/2 ....... 22NTM 201 2977/3 ....... 22NTM 201 2977/4 ....... 22NTM 201 3072/1 ....... 25NTM 201 3072/2 ....... 25NTM 201 3072/3 ....... 25NTM 201 3072/4 ....... 25NTM 201 3072/5 ....... 25NTM 201 3138/1 ......... 3NTM 201 3159/1 ......... 3NTM 201 3160/1 ......... 4NTM 201 3160/2 ......... 4NTM 201 3162/1 ....... 19NTM 201 3164/1 ....... 20NTM 201 3167/1 ....... 20NTM 201 3211/1 ....... 11NTM 201 3211/2 ....... 11NTM 201 3216/1 ....... 10NTM 201 3326/1 ....... 14NTM 201 3335/1 ....... 14NTM 201 3416/1 ......... 3NTM 201 3416/2 ......... 3NTM 201 3416/3 ......... 3NTM 201 3425/1 ....... 13

NTM 201 3444/1........ 22NTM 201 3446/1........ 24NTM 201 3448/1.......... 9NTM 201 3448/2.......... 9NTM 201 3448/3.......... 9NTM 201 3449/1........ 10NTM 201 3449/2........ 10NTM 201 3449/3........ 10NTM 201 3469/1.......... 7NTM 201 3477/1........ 24NTM 201 3477/2........ 24NTM 201 3477/3........ 24NTM 201 3477/4........ 24NTM 201 3477/5........ 24NTM 201 3494/1........ 13NTM 201 3501/1.......... 2NTM 201 3604/2.......... 6NTM 201 3605/1.......... 6NTM 201 3606/1.......... 2NTM 201 3607/1.......... 6NTM 201 3655/1........ 11NTM 201 3656/1........ 11NTM 201 3656/2........ 11NTM 201 3657/1........ 16NTM 201 3657/2........ 16NTM 201 3669/1........ 12NTM 201 3669/2........ 12NTM 201 3669/3........ 12NTM 201 3727/1........ 26NTM 201 3728/1........ 26NTM 201 3729/1........ 26NTM 201 3730/1........ 27NTM 201 37451........... 4NTM 201 3754/1........ 15NTM 201 3755/1........ 15NTM 201 3756/1........ 15NTM 201 3757/1........ 15NTM 201 3767/1........ 27NTM 201 3767/2........ 27NTM 201 3811/1........ 27NTM 201 3879/1........ 10NTM 201 3887/1........ 23NTM 201 3887/1........ 47NTM 201 3888/1.......... 4NTM 201 3929/1........ 26NTM 201 3929/2........ 26NTM 201 3931/1........ 29NTM 201 3931/2........ 29NTM 201 3931/3........ 29NTM 202 187/1.......... 24NTN 201 3753/1 ........ 15RRNT 899 065/1 ......... 43RNT 899 066/1 .......... 43RNT 899 067/1 .......... 44RNT 899 068/1 .......... 44RNT 899 101/1 .......... 43RNT 899 119/1 .......... 43RNT 980 02/1 ............ 43RNT899088/1 ............ 41RNT899089/1 ............ 42RNT899090/1 ............ 41RNT899091/1 ............ 41RPM 119 0597/1 ....... 16RPT 403 179/01 ........ 43RPT 403 180/01 ........ 44RPT 403 181/01 ........ 44RPT 403 182/01 ........ 44RPT 403 183/01 ........ 44RPT 899 023/1 .......... 43RPT 899 024/1 .......... 43RPT 899 078/1 .......... 43RPT 899 89/1 ............ 44RPT 980 06/1 ............ 44

RPT 987 25/1 ............ 44RPT 987 33/1 ............ 43RPT 987 35/1 ............ 43RPT 987 37/1 ............ 43RPT899085/1 ............ 41RPT899104/1 ............ 41RPT98730/1 .............. 41RPT98731/1 .............. 42RPT98732/1 .............. 41SSET 145 064/230 ...... 23SET 145 064/305 ...... 23SET 145 095/457 ...... 23SMA 901 05/1............ 17SNT 102 26 ............... 16SXA 120 215/29 ........ 18SXA 120 216/40 ........ 18SXK 107 2022/1 ........ 20SXK 107 2023/1 .......... 5SXK 107 2024/1 .......... 6SXK 107 2025/1 .......... 6SXK 107 2026/1 ........ 21SXK 107 2027/1 ........ 21SXK 107 2126/1 ........ 18SXK 107 2144/1 ........ 19SXK 107 2146/1 ........ 19SXK 107 2146/2 ........ 19SXK 107 2150/1 ........ 20SXK 107 2151/1 ........ 21SXK 107 2158/1 .......... 5SXK 107 2158/2 .......... 5SXK 107 413/1 ............ 7SXK 107 419/1 ............ 7SXK 107 420/1 ............ 8SXK 107 421/1 ............ 8SXK 107 422/1 ............ 8SXK 107 423/1 ............ 8SXK 107 424/1 .......... 17SXK 107 424/2 .......... 17SXK 107 5775/1 ........ 39SXK 107 761/2 ............ 5SXK 118 0932/1 ........ 18SXK 118 0933/1 ........ 18SXK 120 729/16 ........ 18TTSR 899 145/1 R1A .. 29TSR 899 145/2 R1A .. 29TSR 951 101/01 ........ 45TSR 951 101/02 ........ 45TSR 951 101/03 ........ 45TSR 951 103/1 .......... 45TSR 951 103/2 .......... 45TSR 951 103/3 .......... 45TSR 951 1193/1 ........ 45TSR 951 1193/2 ........ 45TSR 951 1193/3 ........ 45TSR 951 322/1 .......... 44TSR 951 322/2 .......... 44TSR 951 322/3 .......... 44TSR 951 70/1 ............ 45TSR 951 70/10 .......... 45TSR 951 70/2 ............ 45TSR 951 70/3 ............ 45TSR 951 70/5 ............ 45TSR 951 70/75 .......... 45TSR951331/1 ............ 45TSR951331/2 ............ 46TSR951331/3 ............ 46TSR951331/5 ............ 46TSR951332/2 ............ 45TSR951332/3 ............ 45TSR951333/1 ............ 46TSR951333/2 ............ 46TSR951333/3 ............ 46

5755

Page 58: Ericsson Tools Catalogue

ERICSSON NUMBER REGISTER

TSR951334/2 ............ 46TSR951334/3 ............ 46ZZTY 203 26/5, MN ..... 37ZTY 203 26/6, ME ..... 37ZTY 203 26/7, MS ..... 37

5856

Page 59: Ericsson Tools Catalogue

References;

Site Installation Material Overview, 151 86.EN/LZT 751 0049 UenSite Implementation Team Producs Overview, 151 86.EN/LZT 751 0014 UenStandard Module Overview feeder System Products, 131 22-COH 109 393/3Standard Module Overview for DF-OVP, 131 22-COH 109 561/4

57