erectastep catalog v4

8/21/2019 Erectastep Catalog v4

1/35


2/35

1.Completely Universaldesign for your custom needs allows for units to be repurposed

later in different configurations.

2.Pre-engineered componentsyou save custom engineering costs.

3.Safety compliance built intothe product Lowers your risk ofownership and increases safety.

4.Costs less than custom fabrication.

5.In stock and ready to ship!


3/35

E-2

E-3

This configuration provides 3 horizontal

and 39 vertical clearance.

This configuration provides 6 horizontaland 48 of vertical clearance.

This configuration provides 9 horizontaland 21 of vertical clearance.

While it is simple to design an ErectaStep

crossover to suit your needs, our

customer service representatives areavailable to help with your design.

The ErectaStep system is ideal for crossovers which allow safe and easy access over pipes,

dike walls and other obstructions. ErectaStep provides up to 9 of horizontal clearance

without tower supports (three platforms) or infinite horizontal clearance with tower

supports. To design your crossover, measure your vertical and horizontal clearance andrefer to the chart on the last page of this catalog to determine which stair model and how

many modular platforms you will need. If you ever have any questions, please feel free to

call one of our experienced customer service representatives or send us a picture of your

work area so we can design the crossover that will best suit your needs.

Safety made simple.


4/35

E-4

E-5

This L shaped crossover configura-tion allows for safe and easy travelover areas such as assembly lines.

This work platform system allowsspecific access to parts such as valvesor filters which require repeated access.

This small platform allows for easy,permanent access to elevated workareas a safe replacement for wobblyladders, work stands or footstools.

This platform provides safe access toupper levels within a confined space, suchas the mezzanine level of a warehouse.

Configurations are endless and

limited only by your imagination.

Call us for any assistance.

Limitless designs. MANUFACTURED USINGPRECISION LASER TECHNOLOGY


5/35

E-6

E-7

Configurations are endless and

limited only by your imagination.

Call us for any assistance.

Limitless designs.

New stair heights provide even greaterhorizontal and vertical clearance.

While raised platforms requirea tower support opposite of stair,support location is flexible.

Multiple tiers of varying heightsrequire no engineering or

supplemental componentsand can be assembled in any

configuration imaginable.

MANUFACTURED USINGPRECISION LASER TECHNOLOGY


6/35

E-8

E-9

The Ladder Component provides greater flexibilitywhen providing access to elevated platforms.

NEW component

Our new ladder components are available in eleven sizes, from one to eleven steps

and bolt to the bottom of any ErectaStep platform with no supplemental parts or

engineering. Each ladder also functions as a support tower. ANSI yellow powder

coating on handrails meet OSHA safety requirements and provide a durable finish.

Built for strength.

MANUFACTUREDUSING PRECISION

LASER TECHNOLOGY


7/35

E-10

E-11

Dolly Components are available for all stair heights.The Dolly Component makes ErectaStepthe most robust rolling platform available.

Custom engineered dolly kits can make virtually

any platform go where you need it, when you

need it. With the limitless configurations you

can design the perfect system to fit your needs.Contact our team for additional design and

configuration needs.

Make your platform mobile.



8/35

E-12

E-13

HIGH PRODUCTION RUNS

MODULAR

PREENGINEERED DESIGN

ECONOMICAL SAVINGS TO YOU

CODE RATINGS MET/EXCEEDED

ASCE 7-10 Table 4-1 Catwalks formaintenance access = 40 PSF

DESIGN LOAD: 50 PSF

PLATFORMS EASILY BOLT TOGETHER

TO MAKE A LARGER PLATFORM

PLATFORM IS IDENTICAL ON ALL 4 SIDES

ErectaSteps universal 3 x 3 platform

design is infinitely expandable through

common bolt hole patterns found on each

side of the platform. Attaching platforms,stairs or ladders is accomplished with only

a ratchet and an open ended wrench. No

additional support is required for spans of 9

feet (3 platforms). When joining more than 4

platforms tower supports are required and

bolt easily to the bottom of one or multiple

platforms, regardless of stair location.

Platforms feature a stamped, slip resistant

surface which provides solid traction. Each

platform is manufactured with stamping

technology to increase strength and lower

costs by eliminating welds. Our use of

robotic welding for the few remaining joints

results in strong, precise welds on every

platform shipped.

Customization is king.MANUFACTURED USINGPRECISION LASER TECHNOLOGY

PATENT P ENDING


9/35

E-14

E-15

ErectaStep Safety Handrails come in one standardized size and share

a bolt hole pattern with the universal platform, allowing the handrails

to attach to any side of the platform. Constructed of round pipe with an

outer diameter of slightly less than 2 and powder coated ANSI safetyyellow, these handrails are robust in strength as well as appearance.

Ease of use.

Three handrail sections shown on each sideof this crossover unit bolt up consecutivelyto their respective platforms, allowing forsafe passage over workplace obstructions.

DESIGN LOAD:

200 LBS. IN ANY DIRECTION

HANDRAILS AND STAIRS SHARE

THE SAME BOLT HOLE PATTERN

PATENT P ENDING


10/35

E-16

E-17

NEW component NEW component NEW component

STAIR BOLTS TO ANY OF THE 4 SIDES

OF THE UNIVE RSAL PLATFORM

DESIGN LOAD:

1000 LBS. MOVING LOAD

ErectaStep stair units come in 9

vertical increments with 26 of

walk surface and slip resistant

tread. To meet OSHA regulations,handrails are powder coated ANSI

safety yellow. Stairs bolt to any side

of the universal platform, allowing

for easy customization. Stair units

ship broken down for low shipping

costs and are easy to assemble.

Please see the spec sheet on page

E-30 for dimensions on all stair sizes.

A step up in quality.

1-Step Safety StairPart No. 11386











PATENT P ENDING


11/35

E-18

E-19

ErectaStep support towers use an anchor bolt hole design that

match up with the bolt-hole pattern on the bottom of the universal

platform, allowing for three bolt-up scenarios: 1) a single tower

bolting to a single platform; 2) bolting two platforms on either sideof a support tower; and 3) bolting support towers on multiple sides

of the same platform. Support towers are necessary when using

more than 3 platforms in succession. Each leg of support must be

supported to grade adequately.

Built for strength.

Tower Support 1Part No. 11378












NEW component NEW component NEW component

PATENT PENDING


12/35

E-20

E-21

Our new ladder components are

available in eleven sizes, from

one to eleven steps and bolt to the

bottom of any ErectaStep platform

with no supplemental parts or

engineering. Each ladder also

functions as a support tower. ANSI

yellow powder coating on handrails

meet OSHA safety requirements

and provide a durable finish.

Versatility defined.

1-Step Ladder UnitPart No. 11457












PATENT P ENDING


13/35

E-22

E-23

Long catwalk platform system for compressor stations make installation simple and timely.

Multiple entry and exit make an ideal problem solving solution.

ErectaStep is ideal for creating crossovers, raised walkways and equipment access and service platforms.


14/35

E-24

E-25

Two problems, same solution: ErectaStep.Four stair berm crossover.

Eight stair pipe crossover. This ten stair platform provides 360 degree access.

Rooftop access to solar and air conditioning units.



15/35

E-26

E-27

Complex crossover with multiple access points.Configure handrail placement for access as required.

Five step service platform. Two step trailer access.

The components from this crossover can be re-purposed as the plant grows.



16/35

E-28

E-29

Platform allowing access to two sides of pumps.Pump station access was an afterthought.

3 0 verti ca l c le aran ce , 9 s pa n o ve r p ipes. Cre ate so lu ti on s t o co mplex p lat fo rm ne eds o ve ror through machines.

ErectaStep crossover system safely spans 9 without the need for additional support.Parts used:2 3-Step Stair Units (11388), 3 Universal Platforms (11394), 6 Safety Handrails (11395)



17/35

10.Buyer assumes liability for patent andcopyright infringement when goods aremade to Buyers specifications.

11.If the Buyer cancels an order prior to its completion; theBuyer agrees to payto Seller the percentageof the selling

pricebased on thepercentageof thecompletion, plus anycosts for thedisposalof usedmaterial. TheSeller woulddeterminethe percentageof completion.

12.Indemnity: Buyer shallindemnifyand holdharmless ErectaStep, its affiliatedcompanies, owners, employees,agents, andsuccessors fromandagainst any andall claims, expenses, liability, andloss arisingfromclaims for in-

jury, death, or damageto, or destruction of propertyarising fromunauthorizedrepair or modifications to theproductsprovidedunder this purchaseorder/quotation, as wellas failureto properlymaintain said products, improper useofsaidproducts, useof said products for anythingother than their intendedpurpose, and/or the equipment not working

or functioningproperlycaused bya changein workingparameters that wereunknown byErectaStep.

OSHA 1926.451(f)(16) Platforms shallnot deflect morethan 1/60 of the span when loaded.

OSHA 1910.26(c)(3)(iii)Theladder basesection must beplaced witha securefooting.OSHA 1910.26(c)(3)(iv) Thetop of theladder must beplacedwith thetwo rails supported, unless equippedwitha singlesupport attachment.OSHA 1910.27 Fixed ladders.

OSHA 1910.27(a) Design requirements-(1) Design considerations. Allladders, appurtenances, andfastenings shallbe designedto meet thefollowing loadrequirements:OSHA 1910.27(a)(1)(i) Theminimumdesign liveload shallbe asingle concentratedloadof 200 pounds.

OSHA 1910.27(a)(1)(ii)Thenumber andposition of additionalconcentratedlive loadunits of 200 poundseachas determinedfrom anticipatedusageof theladder shallbe consideredin thedesign.OSHA 1910.27(a)(1)(iii)Thelive loads imposedby persons occupyingtheladder shallbe consideredto beconcentratedat suchpoints as willcausethe maximumstress in thestructuralmember beingconsidered.OSHA 1910.27(a)(1)(iv) Theweight of theladder andattachedappurtenances together withthe liveloadshallbe consideredin thedesign of rails andfastenings.OSHA 1910.27(b) Specific features-(1) Rungs and cleats. (i)All rungs shallhave aminimumdiameter ofthree-fourths inchfor metal ladders, except as coveredin paragraph(b)(7)(i)of this section anda minimumdiameter of 1 1/8 inches for wood ladders.OSHA 1910.27(b)(1)(ii)Thedistancebetween rungs, cleats, andsteps shallnot exceed12 inches and shallbeuniform throughout thelength of theladderOSHA 1910.27(b)(1)(iii)Theminimumclear lengthof rungs or cleats shallbe16 inchesOSHA 1910.27(b)(2) Side rails. Siderails whichmight beusedas aclimbingaid shallbe of suchcrosssections as to affordadequategripping surfacewithout sharpedges, splinters, or burrs.OSHA 1910.27(b)(6) Welding. Allwelding shallbe in accordancewiththe Codefor Weldingin BuildingConstruction(AWSD1.0-1966).OSHA 1910.27(c)(5) Clearance in back of grab bar. Thedistancefrom thecenterline of thegrab bar to thenearest permanent object in back of thegrab bars shallbe not less than 4 inches.Grabbars shallnot protrudeon theclimbingsidebeyond therungs of theladder whichtheyserve.OSHA 1910.27(d)(2)(iii)Onerung of anysection of ladder shallbelocated at thelevelof thelandingl aterallyservedby theladder.Where access to thelandingis throughtheladder, thesamerungspacing as usedon theladder shallbe usedfrom thelanding platformto thefirst rungbelow thelanding.OSHA 1910.27(d)(3) Ladder extensions. Theside rails of throughor side-stepladder extensions shallextend3 feet aboveparapets andlandings.For throughladder extensions, therungs shallbeomitted fromtheextension and shallhave not less than 18 nor morethan 24 inches clearancebetween rails.For side-stepor offset fixedladder sections, at landings, theside rails andrungs shallbe carriedto thenext regular rungbeyondor abovethe3 feet minimum.(fig. D-10).OSHA 1910.27(d)(4) Grab bars. Grabbars shallbespacedby acontinuation of therung spacingwhen theyarelocatedin thehorizontalposition.Vertical grabbars shallhave thesame spacingas theladder siderails.Grab-bar diameters shallbe theequivalent of theround-rungdiameters.

1-Step

2-Step

3-Step

4-Step

5-Step

6-Step

7-Step

8-Step9-Step

10-Step

11-Step

12

21

30

39

48

57

66

7584

93

102

18

27

36

45

54

63

72

8190

99

108

9

18

27

36

45

54

63

7281

90

99

Cross-Over Clearance TableA (in) B (in) C (in)

1-Step

2-Step

3-Step

4-Step

5-Step

6-Step

7-Step

8-Step

9-Step

10-Step

11-Step

18

27

36

45

54

63

72

81

90

99

108

44 lbs.

50 lbs.

55 lbs.

60 lbs.

66 lbs.

71 lbs.

77 lbs.

82 lbs.

87 lbs.

93 lbs.

98 lbs.

A Est. Weight

Ladder Unit Specifications

E-30

E-31


18/35

Access when you need it, where you need it.

Designed with ease of use in mind.

In stock and ready to ship!


19/35

The C Seriess cantilever work platform

allows an operator to take a position aboveand/or to move onto tall industrial machinery.

The steel base provides exceptional counterbalance, while the lightweight aluminum

upper provides single user maneuverability.

A large, six square foot work platform

provides ample room for an operator as

well as parts and tools. The self-supportingplatform extends 2-5 feet beyond the base

of the chassis, providing access while eliminat-

ing contact with the equipment being serviced.

Features fixed platform work areaand single operator mobility.

BrittanyCustomerService

The full size 2 diameter handrails are

42 tall around the work platform andpowder coated to meet OSHA standards.

Our aggressive, self-draining tread, is featured

on both platforms and steps. This pattern

provides safe, all weather access in both rainand snow and reduces ice build up.

Built for Safety.The easy steer design and large no-flat tiresallow a single operator to easily

roll and position the unit, even over rough ground.

The 360 swiveling wheels provide perpendicular or parallel movement and

allow easy positioning. Wheels lock for stability.

For efficient longer distance moves, forklift pockets allow rapid relocation.

Easy to Roll.

Wheels swivel 360 for easy placement

All-weather slip-resistant tread The 24 wide by 36 long platform provides ample work area.Shown with optional YellowGate swing gate.

The heavy, galvanized steel base provides incredible stability,while large no-flat tires provide single user manueverability.

No-flat tires

Forklift pocketsallow rapid mobility

Optional cage providesoff-platform safety

Optional cage providesoff-platform safety

Self-supportingplatform

42 high railing onplatform and cagemeetOSHA standards

Full-size 2diameter handrails

R-2

R-3

Available in sizes from

7 steps to 11 stepsSeespecs section for details


20/35

The large cage provides ampleroom for an operator to performtasks around various hatch sizes.

The self supported cantilevered platform extends 2-5 beyond the wheel base.

The C Series is ideal for providingaccess to the tops of tank trucks.

R-4

R-5


21/35

The G Series is a variable height, self-leveling

platform. Its 24 wide steps and six square foot

platform self level to present a safe walk and

work surface throughout its working range.

The aluminum upper, galvanized steel base and

stainless hardware is built to last, both indoors and out.

Adjustable heightanywhere you want it.

The G Series adjusts height with the

removal of a single locking pin.

The gas springs provide assistance

in raisingthe platform, while gentle

downward pressure lowers the platform.

Replace the locking pin at the desired

height and the stair is ready for use.

Adjustable Height.

Includes Patent #7,950,095B2.Other patents pending.

PatsyCustomerService

The wide steel base provides excellent stability. Six sq. ft. work area provides room for an operator and equipment.

Gas springs for easyheight adjustment

360 swivelcasters allow for

precise placement

Stairs andplatform self-levelat any height

Self-supportingplatform

R-6

R-7

Available in sizes from7 steps to 10 stepsSeespecs section for details


22/35

Self-supporting platformprotects fragile equipment.

Work at the correct height for the j ob.

Work at multiple heights in multiplelocations with a single platform.

R-8

R-9


23/35

Optional removable handrails give the MP

series mobile platform unparalleled versatility.

Remove the cantilever end handrail to access an area over an

obstruction, or remove an entire side to access a flatbed trailer.

Each handrail slides securely into and out of its retaining sleeve

withouttools, allowing operators to reconfigure the platform in the field.

Configurability

Full sized stairs allow users tooperate as if on a fixed pl atform.

The MP Series is easily

maneuvered by a single operatorand the 360 swiveling casters

allow precise positioning.

Locking casters prevent both

swivel and roll, while the soft

no-flat tires roll easily over

asphalt and gravel.

Mobility

AnnetteCustomerService

The MP Series is a highly mobile work platform designed to bring the user to the level of

the work with an unparalleled level of confidence and safety. The powder-coated handrails,full size 45 rise stair stringer, and standard width and depth steps meet OSHA specifications

for mobile platforms. The lightweight aluminum construction and single user maneuverability

ensure the MP will be a favorite and likely the Go-to workhorse of any facility.

Built like a fixed platform.

The workspace of a fixed platform with the benefit of mobility.

R-10

R-11

Available in sizes from2 steps to 7stepsSeespecs section for details


24/35

The 5 stair MP Series is the perfecttool for loading and unloading trucks.

With all aluminum construction and powder coatedhandrails RollAStep is built to last both indoors and out.

Swiveling casters allow theMP to be easily positioned

against machinery forinspection or service.

R-12

R-13


25/35

R-14

R-15

Allow operators the ease and safety ofloading/securing safely before motoring.

One to two operators can safely move unitsaway from trucks while entering and exitingthe loading bays to prevent any damage.RollASteps individual removable handrails

allow for quickly accessing specific locationsalong the platform without compromisingsafety in other areas.


26/35

R-16

R-17

Larger custom platforms allow for multipleusers and equipment to be close at hand.Cantilever platform and angled handrailsinsure minimal gaps between platform andwork area such as a fuselage of an aircraft.

Customized tomeet your needs.

Custom load-rated platform systems allow for multipleweight applications that may include heavier toolingequipment as well as several operators during use.Leading edge padded bumpers are available to preventdamage to your equipment while in use.

R-19


27/35

We designed our tilt and roll with room to

get the job done, wherever it may be. The six

square foot platform is large enough for an

operator, tools and parts, with room to spare.

The lightweight frame and unique side rolling

wheels make this rolling platform highly

mobile and easy to position in tight spaces.

Made for work.Designed for safety.

HeatherReceptionist

Six square feet of work area is roomy enough for an operator, tools and parts.Full size, powder coated handrails.

The TR Series is anything but a standard

stick-built rolling ladder.

Built for safety.

The unique side rolling casters make the TR Series easy to position in tight areas.

300 lbs.Load Limit

Available in sizes from1 step to 5 steps

Seespecs section for details

The sturdy aluminum construction supportsa 300lb load limit without sacrificing mobility.

Full-size handrails

Wide base and stairs

Aggressive tread

42 Handrail and midrail

Full toeboard

R-18

R 19

R-21


28/35

The additional platform area brings a

new level of safety to warehousing tasks.

The wide base provides additional stability.

The TR Series is designed with the stabilityand work area to get the job done.

R-20

R-23


29/35

R-22

R-25


30/35

R-24

R-27


31/35

1910.29(a)General requirements-

1910.29(a)(1)Application.Thissection isintended toprescriberules andrequirementsfor thedesign,construction,and useof mobilework platforms(includingladderstands butnot including

serialladders)and rolling(mobile)scaffolds (towers).Thisstandardis promulgatedto aidinproviding forthe safetyof life,limb, andproperty,by establishingminimumstandardsforstructuraldesignrequirementsandfortheuseof mobileworkplatformsandtowers.

1910.29(a)(2)Working loads.

1910.29(a)(2)(i)Workplatformsandscaffoldsshallbecapableofcarryingthedesignloadundervaryingcir-cumstancesdependingupon theconditions ofuse. Therefore,allparts andappurtenancesnecessaryfortheir safeand efficientutilizationmust beintegral partsof thedesign.

1910.29(a)(2)(ii)Specific design and construction requirements are not a part of this section because ofthe wide variety of materials and design possibilities. However, the design shall be suchas to produce a mobile ladder stand or scaffold that will safely sustain the specifiedloads. The material selected shall be of sufficient strength to meet the test requirementsand shall be protected against corrosion or deterioration.

1910.29(a)(2)(ii)(a)Thedesignworkingloadofladderstandsshallbecalculatedonthe basisofoneor more200-poundpersonstogetherwith50 poundsofequipmenteach.

1910.29(a)(2)(ii)(b)The design load of all scaffolds shall be calculated on the basis of:Light Designed and constructed to carry a working load of 25 pounds per square foot.Medium Designedandconstructedto carrya workingloadof50 poundspersquarefoot.Heavy Designed and constructed to carry a working load of 75 pounds per square foot.All ladder stands and scaffolds shall be capable of supporting at least four times thedesign working load.

1910.29(a)(2)(iii)The materials used in mobile ladder stands and scaffolds shall be of standard manufac-ture and conform to standard specifications of strength, dimensions, and weights, andshall be selected to safely support the design working load.

1910.29.(a)(2)(iv)Nails, bolts, or other fasteners used in the construction of ladders, scaffolds, and towersshall be of adequate size and in sufficient numbers at each connection to develop thedesigned strength of the unit. Nails shall be driven full length. (All nails should be im-mediately withdrawn from dismantled lumber.)

1910.29(a)(2)(v)All exposed surfaces shall be free from sharp edges, burrs or othersafety hazards.

1910.29(a)(3)Work levels.

1910.29(a)(3)(i)Themaximumworklevelheightshallnotexceedfour(4)timestheminimumorleastbasedimensionsofanymobileladderstandorscaffold. Wherethebasicmobileunitdoesnotmeetthis requirement,suitableoutriggerframesshall beemployed toachieve thisleastbasedimension,or provisionsshallbemadeto guyorbracetheunitagainsttipping.

1910.29(a)(3)(ii)The maximum platform width for any wo rk level shall not be less than 20 inches formobile scaffolds (towers). Ladder stands shall have a minimum step width of 16 inches.

1910.29(a)(3)(iii)Thesupportingstructurefor theworklevelshall berigidlybraced,usingadequatecrossbracingordiagonalbracingwithrigid platformsat eachworklevel.

1910.29(a)(3)(iv)The steps of ladder stands shall be fabricated from slip resistant treads.

1910.29(a)(3)(v)The work level platform of scaffolds (towers) shall be of wood, aluminum, orplywood planking, steel or expanded metal, for the full width of the scaffold,except for necessary openings. Work platforms shall be secured in place. Allplanking shall be 2-inch (nominal) scaffold grade minimum 1,500 f. (stressgrade) construction grade lumber or equivalent.

1910.29(a)(3)(vi)All scaffold work levels 10 feet or higher above the ground or floor shall have astandard (4-inch nominal) toeboard.

1910.29(a)(3)(vii)All work levels 10 feet or higher above the ground or floor shall have a guardrailof 2- by 4-inch nominal o r the equivalent installed no less than 36 inches ormore than 42 inches high, with a mid-rail, when required, of1- by 4-inch nominal lumber or equivalent.

1910.29(a)(3)(viii)A climbing ladder or stairway shall be provided for proper access and egress, andshall be affixed or built into the scaffold and so located that its use will not havea tendency to tip the scaffold. A landing platform shall be provided at intervalsnot to exceed 30 feet.

1910.29(a)(4)Wheels or casters.

1910.29(a)(4)(i)Wheels or casters shall be properly designed for strength and dimensions tosupport four (4) times the design working load.

1910.29(a)(4)(ii)All scaffold casters shall be provided with a positive wheel and/or swivel lockto prevent movement. Ladder stands shall have at least two (2) of the four (4)casters and shall be of the of the swivel type.

1910.29(a)(4)(iii)Where leveling of the elevated work platform is required, screw jacksor other suitable means for adjusting the height shall be provided in the basesection of each mobile unit.

1910.29(e)Mobile work platforms

1910.29(e)(1)Design. Units shall be designed for the use intended and shall comply with therequirements of paragraph (a) of this section.

1910.29(e)(2)Base width. The minimum width of the base of mobile work platforms shallnot be less than 20 inches.

1910.29(e)(3)Bracing.Adequaterigiddiagonalbracingtoverticalmembersshallbe provided.

United States of America Department of LaborOccupational Safety & Health Administration

R-26

OR EMAIL FORM TO:

[email protected] or [email protected]

GRAND TOTAL

FAX ORDER FORM TO:

843-264-8584

DESCRIPTION

UNIVERSAL PLATFORM

SAFETY HANDRAIL

SAFETY STAIR UNIT 1 (1 step)











TOWER SUPPORT 1

TOWER SUPPORT 2

TOWER SUPPORT 3

TOWER SUPPORT 4

TOWER SUPPORT 5

TOWER SUPPORT 6

TOWER SUPPORT 7

TOWER SUPPORT 8

TOWER SUPPORT 9

TOWER SUPPORT 10

TOWER SUPPORT 11

LADDER UNIT 1 (2 rungs)











11394

11395

11386

11387

11388

11389

11390

11391

11392

11393

11465

11466

11467

11378

11379

11380

11381

11382

11383

11384

11385

11468

11469

11470

11457

11458

11459

11460

11461

11462

11463

11464

11488

11489

11490

PART NO.QUANTITY WEIGHT UNIT PRICE SUBTOTAL

46 lbs.

21 lbs.

44 lbs.

64 lbs.

88 lbs.

108 lbs.

130 lbs.

150 lbs.

170 lbs.

190 lbs.

210 lbs.

230 lbs.

250 lbs.

13 lbs.

18 lbs.

23 lbs.

28 lbs.

34 lbs.

45 lbs.

50 lbs.

55 lbs.

60 lbs.

65 lbs.

70 lbs.

44 lbs.

50 lbs.

55 lbs.

60 lbs.

66 lbs.

71 lbs.

77 lbs.

82 lbs.

87 lbs.

93 lbs.

98 lbs.

DESCRIPTION

RS-CANTILEVER SERIES-C8





RS-MP SERIES-MP27

RS-MP SERIES-MP36

RS-MP SERIES-MP45

RS-MP SERIES-MP54

RS-MP SERIES-MP63

RS-MP SERIES-MP72

RS-G SERIES-G7

RS-G SERIES-G8

RS-G SERIES-G9

RS-G SERIES-G10

RS-TR SERIES-TR24

RS-TR SERIES-TR36

RS-TR SERIES-TR48

RS-TR SERIES-TR60

RS-TR SERIES-TR72

11781

11782

11783

11784

11785

11786

11787

11788

11789

11790

11791

11793

11794

11795

11796

11797

11798

11799

11800

11801

PART NO.QUANTITY UNIT PRICE SUBTOTAL

GRAND TOTAL

GRAND TOTAL

DESCRIPTION

RS-YELLOWGATE-A11792

PART NO.QUANTITY UNIT PRICE SUBTOTAL

Y-3


32/35

YellowGates twenty inches of adjustability, field-reversible swing direction and universal mounting system

protects every passageway,with one SKU.

Simply count the number of openings where fall protection is required and place your order no time consuming

tracking of measurements or mounting types required and no costly returns due to ordering the wrong size or swing.

Each gate is field adjustable for both length and swing direction with a single wrench. The universal mounting

system mounts to walls, angle iron and round pipe or square tube with no additional parts to order.

One Gate.Fits All.Stops Falls.Simplify compliance with one gate.

This open-ended 24 wide platform terminus is now protected from falls.

Field-adjustable length from 16 to 36 inches with a single wrench.

The universal mounts parallel and perpendicular mounting capabilitiesmeet any installation requirement, no additional parts required.

Parallel mount

Perpendicular mount

Universal Mount

Universal mount no additionalparts to order.

Y-2

Built to last,outdoors and in.

Y-5


33/35

The Malbec Tensioner eliminates the need for a swing gates most

common failure point, the spring. The patent pending system provides

field adjustable tension and maintenance free closure, every time.

YellowGate can swing either in or out by simply relocating two bolts.

Patent PendingMalbec TensionerNo spring to fail.

The Most AdjustableSwing Gate Available.

Easily adjusts from16 wide to 36.Minimum width of YellowGate unit: 16 in perpen-

dicular configuration, 19.5 in parallel configuration.

Y-4

Universal MountMounts anywhere, no additional parts required.

1910.23 Guarding Floor & Wall Openings & Holes

(a) Protection of floor openings(a.2) Guard ladderway floor openings or platforms like

a stairway floor opening with passage through the

railing either provided with a swinging gate or offset

so a person cannot walk directly into the opening.

OSHA Regulation

Mounts to walls, round and square tubeand angle iron, with a single mount.


34/35

Based in Andrews, South Carolina, Six Axis is the parent company of ErectaStep, RollaStep, and YellowGate brands. We are committedto Safety, Quality and Customer Service in both our product designsand our manufacturing ideology. Our advanced technology allowsus to respond faster, reduce lead times and lower costs withoutcompromising quality and engineered design.


35/35

erectastep catalog v4

Documents