equipment for breakwater and dock construction natec...

BREAKWATER AND MARINE BREAKWATER AND MARINE DOCK CONSTRUCTIONDOCK CONSTRUCTION

EQUIPMENTEQUIPMENT

CATALOGUE 2007CATALOGUE 2007

BREAKWATER & DOCK CONSTRUCTION EQUIPMENT

CONCRETE BLOCK EXTRACTION CLAMP TECHNICAL DATA

MULTI BLOCK SIZE EXTRACTION CLAMP

Three finger clamp operated through gravity blocking system. Using hoist and two wire ropes, one to close and lift the load and the other to open

and lift unloaded.

Clamp mass: 9,5 Ton

Block mass : Multi-size 30 & 45 Ton.

Drive system : Two wire ropes & hoist.

Standard : EN - 13155

Clamps for other block sizes on request.

C/ Marqué s de San Esteban Nº9 4º33206 Gijón – Asturias – Españ a

Tfno: 0034 984199692 Fax: 0034 984199992www.natec-ingenieros.com [email protected]

http://www.natec-ingenieros.com

mailto:[email protected]

BLOCK HANDLING CLAMP FOR STORAGE PARK

MULTI BLOCK SIZE HANDLING CLAMP FOR

SIZES 30 & 60 Ton

Four shoe clamp operated through gravity blocking system. Ideal for handling concrete

blocks after short cure periods in block production facilities. Single rope wire lifting system with

pneumatic or hydraulic anchoring system in open position. Two wire rope system available.

Clamp mass: 6,5 Ton


Drive system : Single wire rope with anchor system. Two wire rope system available.






TECHNICAL DATA



HANDLING CLAMP FOR 145 Ton BLOCKS




Clamp mass: 12 Ton.

Block mass : 145 Ton.

Drive system : Single wire rope with anchor system. Two wire rope system available

Stasndard : EN - 13155





TECHNICAL DATABLOCK HANDLING CLAMP FOR STORAGE PARK



MULTI BLOCK SIZE HANDLING CLAMP FORSIZES 145 & 200 Ton




Clamp mass: 17 Ton


Drive system : Single wire rope with anchor system. Two wire rope system available









MULTIPLE BLOCK HANDLING CLAMP FOR 4 BLOCKS x 10 TON

Clamp operated through gravity blocking system for 4 blocks x 10 Tons simultaneously. Single

rope wire lifting system with pneumatic or hydraulic anchoring system in open position.

Hydraulic blocking system available.

Clamp mass: 4,9 Ton

Block mass : 4 x 10 Ton.

Drive system : Single wire rope with anchor system. Hydraulic system available









BLOCK POSITIONING CLAMP

Two finger clamp with gravity blocking system for positioning and extraction of blocks in breakwater sea dikes. Two wire rope handling system, one to close and lift the load and the other to open and

lift unloaded.

Clamp mass: 9,3 Ton

Block mass : 145 Ton.

Drive system : Two wire rope handling system.

Standard : EN – 13155





TECHNICAL DATABLOCK POSITIONING CLAMP IN BREAKWATER



CLAMPS FOR DEMOULDING AND MOULD HANDLING

DEMOULDING CLAMP FOR SEVERAL BLOCK SIZES : 30 & 60 Ton . TWO BLOCKS

PER MOULD.

Hydraulic demoulding clamp for twin moulds, containing 2 blocks of 30 or 60 Ton per block. Same clamp usable for the two block sizes.

Clamp also for mould handling.

Clamp mass: 2,9 Ton

Block mass : 2 x 30 Ton & 2x 60 Ton.

Drive system : Hydraulic from Crane or On-board hydraulic unit.






TECHNICAL DATA



DEMOULDING CLAMP FOR SEVERAL BLOCK SIZES : 145 & 200 Ton. ONE BLOCK

PER MOULD.

Hydraulic demoulding clamp for single moulds, containing 1 block of 145 or 200 Ton per block.

Same clamp usable for the two block sizes. Clamp also for mould handling.

Clamp mass : 11 Ton

Block mass : 145 Ton & 200 Ton.

Drive system : Hydraulic from Crane or On-board hydraulic unit.






TECHNICAL DATACLAMPS FOR DEMOULDING AND MOULD HANDLING



DEMOULDING CLAMP FOR CLUSTER MOULDS. FOUR BLOCKS PER MOULD.

15 TON BLOCKS

Hydraulic demoulding clamp for cluster moulds, containing 4 blocks of 15 Ton per block.


Clamp mass: 4,8 Ton

Block mass : 4 x 15 Ton

Drive system: Hydraulic from Crane or On-board hydraulic unit









DEMOULDING CLAMP FOR TWEEN BLOCKS SIZE 150 Ton . TWO BLCOKS PER MOULD.

Hydraulic demoulding clamp for twin moulds, containing 2 blocks of 150 Ton per block.


Clamp mass: 10,9 Ton

Block mass : 2 x 150 Ton

Drive system : Hydraulic from Crane or On-board hydraulic unit









MECHANICAL FORK GRAB FOR ROCKDISPLACEMENT

MECHANICAL FORK GRAB FOR ROCK DISPLACEMENT. 5 m³ CAPACITY

Operation system using hoist and two wire ropes, one to close and lift the load, and the other to open and lift unloaded. 5 m³ capacity for large

size rocks and heavy duty.

Fork Grab mass: 17,1 Ton

Capacity : 5 m³

Drive system : Two wire ropes & hoist.


Ask for other sizes or capacities.




TECHNICAL DATA



MOULDS FOR CONCRETE CUBIC BLOCKS

MOULDS FOR VERTICAL DEMOULDING :

Ø Mould cluster for blocks : 4 x 15 ton.

Mould mass : 4,7 Ton

ØMould cluster for blocks : 2 x 60 ton.


ØMould cluster for blocks : 2 x 150 ton.


Other block sizes on request.




TECHNICAL DATA



C/ Marqué s de San Esteban Nº9 - 4º33206 Gijón – Asturias – Españ a

Tfn: 0034 984199692 Fax: 0034 [email protected]



equipment for breakwater and dock construction natec...

Documents