epa wa | epa western australia - lake disappointment site plan · 2021. 1. 4. · attention michael...
TRANSCRIPT
PT13 0m
PT13 900m
PT13 800m
PT13 700m
PT13 600m
PT13 500m
PT13 400m
PT13 300m
PT13 200m
PT13 100m
PT13 1000m
481000 481500 48200074
2450
074
2480
074
2510
074
2540
074
2570
0
Lake Disappointment Site Plan
SGRMI15002-136-Sediment Sampling SitesMarch 2018 Sediment Sampling Sites
10/10/2018
Sediment Samples
0 50 100
Meters
¯
Lake Disappointment
Trench Area
Envirolab Services (WA) Pty Ltd trading as MPL Laboratories
ABN 53 140 099 207
16-18 Hayden Court Myaree WA 6154
ph 08 9317 2505 fax 08 9317 4163
www.mpl.com.au
CERTIFICATE OF ANALYSIS 208454
159 Stirling Highway, NEDLANDS, WA, 6009Address
Michael RuaneAttention
Reward Minerals Pty LtdClient
Client Details
22/03/2018Date completed instructions received
22/03/2018Date samples received
14 Soil, 5 WaterNumber of Samples
Water and Sediment AnalysisYour Reference
Sample Details
Please refer to the last page of this report for any comments relating to the results.
Results are reported on a dry weight basis for solids and on an as received basis for other matrices.
Samples were analysed as received from the client. Results relate specifically to the samples as received.
Please refer to the following pages for results, methodology summary and quality control data.
Analysis Details
Tests not covered by NATA are denoted with *Accredited for compliance with ISO/IEC 17025 - Testing.
NATA Accreditation Number 2901. This document shall not be reproduced except in full.
12/04/2018Date of Issue
12/04/2018Date results requested by
Report Details
Todd Lee, Laboratory Manager
Authorised By
Stacey Hawkins, Acid Soils Supervisor
Joshua Lim, Operations Manager
Results Approved By
Revision No: R00
208454MPL Reference: Page | 1 of 26
Client Reference: Water and Sediment Analysis
170,000160,000160,000160,000160,0001µS/cmElectrical Conductivity (EC)
7.06.66.96.76.8pH UnitspH
23/03/201823/03/201823/03/201823/03/201823/03/2018-Date analysed
23/03/201823/03/201823/03/201823/03/201823/03/2018-Date prepared
Saline WaterSaline WaterSaline WaterSaline WaterSaline WaterType of sample
PT12B-1000PT12B-750PT12B-500PT12B-250PT12B-0PQLUNITSYour Reference
208454-19208454-18208454-17208454-16208454-15Our Reference
Miscellaneous Inorganics
MPL Reference: 208454
R00Revision No:
Page | 2 of 26
Client Reference: Water and Sediment Analysis
14,00013,00013,00013,00012,0003mg/LHardness as CaCO3
5.82.72.54.11.3%Ionic Balance
15,00014,00014,00014,00014,0001mg/LSulphate
90,00084,00085,00083,00083,0001mg/LChloride
22222325275mg/LTotal Alkalinity as CaCO3
<5<5<5<5<55mg/LHydroxide OH- as CaCO3
<5<5<5<5<55mg/LCarbonate CO3 2- as CaCO3
22222325275mg/LBicarbonate HCO3 as CaCO3
65,00057,00058,00058,00055,0000.5mg/LSodium - Dissolved
3,0002,6002,6002,6002,4000.5mg/LMagnesium - Dissolved
3,5003,0003,0003,0002,9000.5mg/LPotassium - Dissolved
8007907808308100.5mg/LCalcium - Dissolved
23/03/201823/03/201823/03/201823/03/201823/03/2018-Date analysed
23/03/201823/03/201823/03/201823/03/201823/03/2018-Date prepared
Saline WaterSaline WaterSaline WaterSaline WaterSaline WaterType of sample
PT12B-1000PT12B-750PT12B-500PT12B-250PT12B-0PQLUNITSYour Reference
208454-19208454-18208454-17208454-16208454-15Our Reference
Ionic Balance
MPL Reference: 208454
R00Revision No:
Page | 3 of 26
Client Reference: Water and Sediment Analysis
0.0410.0570.100.0610.0730.001mg/LZinc-Dissolved
<0.0025<0.0025<0.0025<0.0025<0.00250.0005mg/LUranium-Dissolved
<0.0025<0.0025<0.00250.0045<0.00250.0005mg/LThorium-Dissolved
<0.005<0.005<0.005<0.005<0.0050.001mg/LSelenium-Dissolved
<0.005<0.005<0.005<0.005<0.0050.001mg/LLead-Dissolved
0.0070.0090.0060.0060.0350.001mg/LNickel-Dissolved
2.01.81.81.71.70.005mg/LManganese-Dissolved
0.120.110.110.110.110.0005mg/LLithium-Dissolved
<0.05<0.05<0.050.090.160.01mg/LIron-Dissolved
<0.005<0.005<0.005<0.005<0.0050.001mg/LCopper-Dissolved
<0.005<0.005<0.005<0.005<0.0050.001mg/LChromium-Dissolved
<0.005<0.005<0.005<0.005<0.0050.001mg/LCobalt-Dissolved
0.00110.00070.00080.00090.00130.0001mg/LCadmium-Dissolved
<0.005<0.005<0.005<0.005<0.0050.001mg/LArsenic-Dissolved
<0.05<0.05<0.05<0.05<0.050.01mg/LAluminium-Dissolved
04/04/201804/04/201804/04/201804/04/201804/04/2018-Date analysed
04/04/201804/04/201804/04/201804/04/201804/04/2018-Date prepared
Saline WaterSaline WaterSaline WaterSaline WaterSaline WaterType of sample
PT12B-1000PT12B-750PT12B-500PT12B-250PT12B-0PQLUNITSYour Reference
208454-19208454-18208454-17208454-16208454-15Our Reference
Dissolved Metals in Water
MPL Reference: 208454
R00Revision No:
Page | 4 of 26
Client Reference: Water and Sediment Analysis
<0.75<0.75<0.75<0.75<0.750.75kg CaCO3 /tLiming rate without ANCE
<5<5<5<5<55moles H+ /ta-Net Acidity without ANCE
<0.01<0.01<0.01<0.01<0.010.01%w/w SNet Acidity (WA)
<0.75<0.75<0.75<0.75<0.750.75kg CaCO3 /tLiming rate
<5<5<5<5<55moles H+ /ta-Net Acidity
<0.01<0.01<0.01<0.01<0.010.01%w/w Ss-Net Acidity
NTNTNTNTNT0.01%w/w Ss-SNAS
NTNTNTNTNT5moles H+ /ta-SNAS
NTNTNTNTNT0.005%w/w SSNAS
22222Fineness Factor
0.170.150.150.150.120.005%w/w Ss-ANCE
0.520.50.50.50.40.01% CaCO3 ANCE
0.0490.0570.0510.0540.0720.005%w/w Ss-MgA
31353233455moles H+ /ta-MgA
0.0370.0430.0380.0410.0550.005%w/w MgMgA
<0.005<0.005<0.005<0.005<0.0050.005%w/w Ss-CaA
<5<5<5<5<55moles H+ /ta-CaA
<0.005<0.005<0.005<0.005<0.0050.005%w/w CaCaA
<5<5<5<5<55moles H+ /ta-SPOS
<0.005<0.005<0.005<0.005<0.0050.005%w/w SSPOS
<0.01<0.01<0.01<0.01<0.010.01%w/w Ss-TSA
<0.01<0.01<0.01<0.01<0.010.01%w/w Ss-TPA
<0.01<0.01<0.01<0.01<0.010.01%w/w Ss-TAA
<5<5<5<5<55moles H+ /tTSA
NTNTNTNTNT0.005%w/w SSHCl
100919191785moles H+ /ta-ANCE
0.300.290.280.270.310.005%w/wMgP
0.490.630.250.580.260.005%w/wCaP
0.610.740.450.700.410.005%w/wSP
0.260.250.240.230.250.005%w/wMgKCl
0.550.700.250.630.280.005%w/wCaKCl
0.750.850.520.780.480.005%w/w SSKCl
<5<5<5<5<55moles H+ /tTPA
7.27.17.17.07.3pH unitspH Ox
<5<5<5<5<55moles H+ /tTAA
8.58.58.58.68.7pH unitspH kcl
06/04/201806/04/201806/04/201806/04/201806/04/2018-Date analysed
22/03/201822/03/201822/03/201822/03/201822/03/2018-Date prepared
SedimentSedimentSedimentSedimentSedimentType of sample
PT13-400PT13-300PT13-200PT13-100PT13-0PQLUNITSYour Reference
208454-5208454-4208454-3208454-2208454-1Our Reference
sPOCAS
MPL Reference: 208454
R00Revision No:
Page | 5 of 26
Client Reference: Water and Sediment Analysis
<0.75<0.75<0.75<0.75<0.750.75kg CaCO3 /tLiming rate without ANCE
<5<5<5<5<55moles H+ /ta-Net Acidity without ANCE
<0.01<0.01<0.01<0.01<0.010.01%w/w SNet Acidity (WA)
<0.75<0.75<0.75<0.75<0.750.75kg CaCO3 /tLiming rate
<5<5<5<5<55moles H+ /ta-Net Acidity
<0.01<0.01<0.01<0.01<0.010.01%w/w Ss-Net Acidity
NTNTNTNTNT0.01%w/w Ss-SNAS
NTNTNTNTNT5moles H+ /ta-SNAS
NTNTNTNTNT0.005%w/w SSNAS
22222Fineness Factor
0.190.120.190.150.190.005%w/w Ss-ANCE
0.590.40.590.50.590.01% CaCO3 ANCE
0.0450.038<0.0050.0390.0400.005%w/w Ss-MgA
2824<524255moles H+ /ta-MgA
0.0340.029<0.0050.0290.0300.005%w/w MgMgA
<0.005<0.0050.018<0.005<0.0050.005%w/w Ss-CaA
<5<511<5<55moles H+ /ta-CaA
<0.005<0.0050.023<0.005<0.0050.005%w/w CaCaA
<5<5<5<5<55moles H+ /ta-SPOS
<0.005<0.005<0.005<0.005<0.0050.005%w/w SSPOS
<0.01<0.01<0.01<0.01<0.010.01%w/w Ss-TSA
<0.01<0.01<0.01<0.01<0.010.01%w/w Ss-TPA
<0.01<0.01<0.01<0.01<0.010.01%w/w Ss-TAA
<5<5<5<5<55moles H+ /tTSA
NTNTNTNTNT0.005%w/w SSHCl
12078120911205moles H+ /ta-ANCE
0.500.270.360.300.370.005%w/wMgP
0.591.00.170.750.470.005%w/wCaP
0.941.00.460.880.710.005%w/wSP
0.460.240.370.270.340.005%w/wMgKCl
0.631.20.150.870.520.005%w/wCaKCl
1.11.10.581.00.840.005%w/w SSKCl
<5<5<5<5<55moles H+ /tTPA
7.27.07.27.07.2pH unitspH Ox
<5<5<5<5<55moles H+ /tTAA
8.48.48.38.48.4pH unitspH kcl
06/04/201806/04/201806/04/201806/04/201806/04/2018-Date analysed
22/03/201822/03/201822/03/201822/03/201822/03/2018-Date prepared
SedimentSedimentSedimentSedimentSedimentType of sample
PT13-900PT13-800PT13-700PT13-600PT13-500PQLUNITSYour Reference
208454-10208454-9208454-8208454-7208454-6Our Reference
sPOCAS
MPL Reference: 208454
R00Revision No:
Page | 6 of 26
Client Reference: Water and Sediment Analysis
<0.75<0.75<0.75<0.750.75kg CaCO3 /tLiming rate without ANCE
<5<5<5<55moles H+ /ta-Net Acidity without ANCE
<0.01<0.01<0.01<0.010.01%w/w SNet Acidity (WA)
<0.75<0.75<0.75<0.750.75kg CaCO3 /tLiming rate
<5<5<5<55moles H+ /ta-Net Acidity
<0.01<0.01<0.01<0.010.01%w/w Ss-Net Acidity
NTNTNTNT0.01%w/w Ss-SNAS
NTNTNTNT5moles H+ /ta-SNAS
NTNTNTNT0.005%w/w SSNAS
2222Fineness Factor
0.190.190.170.150.005%w/w Ss-ANCE
0.590.590.520.50.01% CaCO3 ANCE
0.0920.0540.038<0.0050.005%w/w Ss-MgA
573324<55moles H+ /ta-MgA
0.0700.0410.029<0.0050.005%w/w MgMgA
0.015<0.0050.21<0.0050.005%w/w Ss-CaA
9<5130<55moles H+ /ta-CaA
0.019<0.0050.26<0.0050.005%w/w CaCaA
<5<5<5<55moles H+ /ta-SPOS
<0.005<0.005<0.005<0.0050.005%w/w SSPOS
<0.01<0.01<0.01<0.010.01%w/w Ss-TSA
<0.01<0.01<0.01<0.010.01%w/w Ss-TPA
<0.01<0.01<0.01<0.010.01%w/w Ss-TAA
<5<5<5<55moles H+ /tTSA
NTNTNTNT0.005%w/w SSHCl
120120100915moles H+ /ta-ANCE
0.490.350.340.440.005%w/wMgP
0.610.572.40.730.005%w/wCaP
1.00.762.01.00.005%w/wSP
0.420.310.320.460.005%w/wMgKCl
0.590.642.10.880.005%w/wCaKCl
1.01.02.21.30.005%w/w SSKCl
<5<5<5<55moles H+ /tTPA
7.37.47.37.2pH unitspH Ox
<5<5<5<55moles H+ /tTAA
8.48.58.38.4pH unitspH kcl
06/04/201806/04/201806/04/201806/04/2018-Date analysed
22/03/201822/03/201822/03/201822/03/2018-Date prepared
SedimentSedimentSedimentSedimentType of sample
PT12-1000PT12-900PT12-800PT13-1000PQLUNITSYour Reference
208454-14208454-13208454-12208454-11Our Reference
sPOCAS
MPL Reference: 208454
R00Revision No:
Page | 7 of 26
Client Reference: Water and Sediment Analysis
<0.005<0.005<0.005<0.0050.005%w/wChromium Reducible Sulfur
SedimentSedimentSedimentSedimentType of sample
PT12-1000PT12-900PT12-800PT13-1000PQLUNITSYour Reference
208454-14208454-13208454-12208454-11Our Reference
Chromium Reducible Sulphur
<0.005<0.005<0.005<0.005<0.0050.005%w/wChromium Reducible Sulfur
SedimentSedimentSedimentSedimentSedimentType of sample
PT13-900PT13-800PT13-700PT13-600PT13-500PQLUNITSYour Reference
208454-10208454-9208454-8208454-7208454-6Our Reference
Chromium Reducible Sulphur
<0.005<0.005<0.005<0.005<0.0050.005%w/wChromium Reducible Sulfur
SedimentSedimentSedimentSedimentSedimentType of sample
PT13-400PT13-300PT13-200PT13-100PT13-0PQLUNITSYour Reference
208454-5208454-4208454-3208454-2208454-1Our Reference
Chromium Reducible Sulphur
MPL Reference: 208454
R00Revision No:
Page | 8 of 26
Client Reference: Water and Sediment Analysis
0.11<0.0020.0020.0020.0020.002µmole/g dry weightThorium
0.20.20.40.30.30.2µmole/g dry weightLithium
20183230280.02µmole/g dry weightIron
0.070.600.120.090.090.02µmole/g dry weightZinc
<0.05<0.05<0.05<0.05<0.050.05µmole/g dry weightUranium*
<0.2<0.2<0.2<0.2<0.20.2µmole/g dry weightSelenium
0.0140.0130.0130.0170.0110.005µmole/g dry weightLead
<0.02<0.020.030.020.020.02µmole/g dry weightNickel
1.01.02.21.02.00.2µmole/g dry weightManganese
0.040.030.040.030.030.02µmole/g dry weightCopper
0.080.030.050.130.150.01µmole/g dry weightChromium
<0.01<0.01<0.01<0.01<0.010.01µmole/g dry weightCadmium
<0.05<0.05<0.05<0.05<0.050.05µmole/g dry weightArsenic
<0.5<0.5<0.5<0.5<0.50.5µmole/g dry weightAcid Volatile Sulphur
SedimentSedimentSedimentSedimentSedimentType of sample
PT13-900PT13-800PT13-700PT13-600PT13-500PQLUNITSYour Reference
208454-10208454-9208454-8208454-7208454-6Our Reference
Acid Volatile Sulphur
<0.002<0.002<0.002<0.002<0.0020.002µmole/g dry weightThorium
0.20.20.20.30.20.2µmole/g dry weightLithium
202217207.30.02µmole/g dry weightIron
0.070.080.080.070.070.02µmole/g dry weightZinc
<0.05<0.05<0.05<0.05<0.050.05µmole/g dry weightUranium*
<0.2<0.2<0.2<0.2<0.20.2µmole/g dry weightSelenium
0.0100.0110.0100.008<0.0050.005µmole/g dry weightLead
0.020.020.030.020.040.02µmole/g dry weightNickel
1.01.01.01.02.00.2µmole/g dry weightManganese
0.020.030.020.030.030.02µmole/g dry weightCopper
0.170.290.130.050.050.01µmole/g dry weightChromium
<0.01<0.01<0.01<0.01<0.010.01µmole/g dry weightCadmium
<0.05<0.05<0.05<0.05<0.050.05µmole/g dry weightArsenic
<0.5<0.5<0.5<0.5<0.50.5µmole/g dry weightAcid Volatile Sulphur
SedimentSedimentSedimentSedimentSedimentType of sample
PT13-400PT13-300PT13-200PT13-100PT13-0PQLUNITSYour Reference
208454-5208454-4208454-3208454-2208454-1Our Reference
Acid Volatile Sulphur
MPL Reference: 208454
R00Revision No:
Page | 9 of 26
Client Reference: Water and Sediment Analysis
0.0030.0050.0300.0030.002µmole/g dry weightThorium
0.30.80.40.40.2µmole/g dry weightLithium
254244350.02µmole/g dry weightIron
0.100.250.130.120.02µmole/g dry weightZinc
<0.05<0.05<0.05<0.050.05µmole/g dry weightUranium*
<0.2<0.2<0.2<0.20.2µmole/g dry weightSelenium
0.0200.0290.0200.0200.005µmole/g dry weightLead
0.030.060.030.030.02µmole/g dry weightNickel
2.32.22.52.10.2µmole/g dry weightManganese
0.040.090.050.060.02µmole/g dry weightCopper
0.050.110.090.080.01µmole/g dry weightChromium
<0.01<0.01<0.01<0.010.01µmole/g dry weightCadmium
<0.05<0.05<0.05<0.050.05µmole/g dry weightArsenic
<0.5<0.5<0.5<0.50.5µmole/g dry weightAcid Volatile Sulphur
SedimentSedimentSedimentSedimentType of sample
PT12-1000PT12-900PT12-800PT13-1000PQLUNITSYour Reference
208454-14208454-13208454-12208454-11Our Reference
Acid Volatile Sulphur
MPL Reference: 208454
R00Revision No:
Page | 10 of 26
Client Reference: Water and Sediment Analysis
8,20010,0006,60010,0001000mg/kgTotal Organic Carbon (Walkley Black)
03/04/201803/04/201803/04/201803/04/2018-Date analysed
03/04/201803/04/201803/04/201803/04/2018-Date prepared
SedimentSedimentSedimentSedimentType of sample
PT12-1000PT12-900PT12-800PT13-1000PQLUNITSYour Reference
208454-14208454-13208454-12208454-11Our Reference
Miscellaneous Inorg - soil
8,20015,0008,30016,0007,3001000mg/kgTotal Organic Carbon (Walkley Black)
03/04/201803/04/201803/04/201803/04/201803/04/2018-Date analysed
03/04/201803/04/201803/04/201803/04/201803/04/2018-Date prepared
SedimentSedimentSedimentSedimentSedimentType of sample
PT13-900PT13-800PT13-700PT13-600PT13-500PQLUNITSYour Reference
208454-10208454-9208454-8208454-7208454-6Our Reference
Miscellaneous Inorg - soil
8,5007,00010,0006,1007,5001000mg/kgTotal Organic Carbon (Walkley Black)
03/04/201803/04/201803/04/201803/04/201803/04/2018-Date analysed
03/04/201803/04/201803/04/201803/04/201803/04/2018-Date prepared
SedimentSedimentSedimentSedimentSedimentType of sample
PT13-400PT13-300PT13-200PT13-100PT13-0PQLUNITSYour Reference
208454-5208454-4208454-3208454-2208454-1Our Reference
Miscellaneous Inorg - soil
MPL Reference: 208454
R00Revision No:
Page | 11 of 26
Client Reference: Water and Sediment Analysis
Determination of various metals by ICP-MS. METALS-022
Metals in soil and water by ICP-OES.METALS-020
Hardness calculated from Calcium and Magnesium as per APHA latest edition 2340B.METALS-008
Anions - a range of anions are determined by Ion Chromatography based on APHA latest edition Method 4110-B. Soils and other sample types reported from a water extract unless otherwise specified (standard soil extract ratio 1:5).
INORG-081
Chromium Reducible Sulfur - Hydrogen Sulfide is quantified by iodometric titration after distillation to determine potential acidity. Based on Acid Sulfate Soils Laboratory Methods Guidelines, Version 2.1 - June 2004.
INORG-068
Suspension Peroxide Oxidation Combined Acidity and Sulphate (SPOCAS) using ASSMAC guidelines.INORG-064
Ion Balance Calculation: Cations in water by ICP-OES; Anions in water by IC; Alkalinity in water by Titration using APHA methods.
INORG-040
Total Organic Carbon or Matter - A titrimetric method that measures the oxidisable organic content of soils. INORG-036
Alkalinity - determined titrimetrically based on APHA latest edition, Method 2320-B. Soils reported from a 1:5 water extract unless otherwise specified.
INORG-006
Conductivity and Salinity - measured using a conductivity cell at 25°C based on APHA latest edition Method 2510. Soils reported from a 1:5 water extract unless otherwise specified.
INORG-002
pH - Measured using pH meter and electrode base on APHA latest edition, Method 4500-H+. Please note that the results for water analyses may be indicative only, as analysis can be completed outside of the APHA recommended holding times. Soils are reported from a 1:5 water extract unless otherwise specified.
INORG-001
Analysed by Envirolab Services Sydney, accreditation number 2901Ext-054
Determination of Acid Volatile Sulfide (AVS) and Simultaneously Extractable Metals (SEM) in sediment - determined colurimetrically and ICP-OES and cold vapour-AAS.
AVS-SEM
Methodology SummaryMethod ID
MPL Reference: 208454
R00Revision No:
Page | 12 of 26
Client Reference: Water and Sediment Analysis
[NT]104[NT][NT][NT][NT]<1INORG-0021µS/cmElectrical Conductivity (EC)
[NT]101[NT][NT][NT][NT][NT]INORG-001pH UnitspH
[NT]23/03/2018[NT][NT][NT][NT]23/03/2018-Date analysed
[NT]23/03/2018[NT][NT][NT][NT]23/03/2018-Date prepared
[NT]LCS-1RPDDup.Base#BlankMethodPQLUnitsTest Description
Spike Recovery %DuplicateQUALITY CONTROL: Miscellaneous Inorganics
MPL Reference: 208454
R00Revision No:
Page | 13 of 26
Client Reference: Water and Sediment Analysis
[NT][NT][NT][NT][NT][NT]<3METALS-0083mg/LHardness as CaCO3
[NT]101[NT][NT][NT][NT]<1INORG-0811mg/LSulphate
[NT]95[NT][NT][NT][NT]<1INORG-0811mg/LChloride
[NT]101[NT][NT][NT][NT]<5INORG-0065mg/LTotal Alkalinity as CaCO3
[NT]101[NT][NT][NT][NT]<5INORG-0065mg/LCarbonate CO3 2- as CaCO3
[NT]101[NT][NT][NT][NT]<5INORG-0065mg/LBicarbonate HCO3 as CaCO3
[NT]98[NT][NT][NT][NT]<0.5METALS-0200.5mg/LSodium - Dissolved
[NT]103[NT][NT][NT][NT]<0.5METALS-0200.5mg/LMagnesium - Dissolved
[NT]100[NT][NT][NT][NT]<0.5METALS-0200.5mg/LPotassium - Dissolved
[NT]101[NT][NT][NT][NT]<0.5METALS-0200.5mg/LCalcium - Dissolved
[NT]23/03/2018[NT][NT][NT][NT]23/03/2018-Date analysed
[NT]23/03/2018[NT][NT][NT][NT]23/03/2018-Date prepared
[NT]LCS-1RPDDup.Base#BlankMethodPQLUnitsTest Description
Spike Recovery %DuplicateQUALITY CONTROL: Ionic Balance
MPL Reference: 208454
R00Revision No:
Page | 14 of 26
Client Reference: Water and Sediment Analysis
88[NT][NT][NT][NT][NT][NT]METALS-0220.001mg/LZinc-Dissolved
86[NT][NT][NT][NT][NT][NT]METALS-0220.0005mg/LUranium-Dissolved
78[NT][NT][NT][NT][NT][NT]METALS-0220.0005mg/LThorium-Dissolved
102[NT][NT][NT][NT][NT][NT]METALS-0220.001mg/LSelenium-Dissolved
79[NT][NT][NT][NT][NT][NT]METALS-0220.001mg/LLead-Dissolved
84[NT][NT][NT][NT][NT][NT]METALS-0220.001mg/LNickel-Dissolved
107[NT][NT][NT][NT][NT][NT]METALS-0220.0005mg/LLithium-Dissolved
98[NT][NT][NT][NT][NT][NT]METALS-0220.01mg/LIron-Dissolved
81[NT][NT][NT][NT][NT][NT]METALS-0220.001mg/LCopper-Dissolved
92[NT][NT][NT][NT][NT][NT]METALS-0220.001mg/LChromium-Dissolved
92[NT][NT][NT][NT][NT][NT]METALS-0220.001mg/LCobalt-Dissolved
99[NT][NT][NT][NT][NT][NT]METALS-0220.0001mg/LCadmium-Dissolved
97[NT][NT][NT][NT][NT][NT]METALS-0220.001mg/LArsenic-Dissolved
102[NT][NT][NT][NT][NT][NT]METALS-0220.01mg/LAluminium-Dissolved
23/03/2018[NT][NT][NT][NT][NT][NT]-Date analysed
23/03/2018[NT][NT][NT][NT][NT][NT]-Date prepared
208454-19[NT]RPDDup.Base#BlankMethodPQLUnitsTest Description
Spike Recovery %DuplicateQUALITY CONTROL: Dissolved Metals in Water
9293[NT][NT][NT][NT]<0.001METALS-0220.001mg/LZinc-Dissolved
8799[NT][NT][NT][NT]<0.0005METALS-0220.0005mg/LUranium-Dissolved
7897[NT][NT][NT][NT]<0.0005METALS-0220.0005mg/LThorium-Dissolved
101102[NT][NT][NT][NT]<0.001METALS-0220.001mg/LSelenium-Dissolved
8094[NT][NT][NT][NT]<0.001METALS-0220.001mg/LLead-Dissolved
7491[NT][NT][NT][NT]<0.001METALS-0220.001mg/LNickel-Dissolved
[NT]98[NT][NT][NT][NT]<0.005METALS-0220.005mg/LManganese-Dissolved
101102[NT][NT][NT][NT]<0.0005METALS-0220.0005mg/LLithium-Dissolved
[NT]99[NT][NT][NT][NT]<0.01METALS-0220.01mg/LIron-Dissolved
8290[NT][NT][NT][NT]<0.001METALS-0220.001mg/LCopper-Dissolved
9191[NT][NT][NT][NT]<0.001METALS-0220.001mg/LChromium-Dissolved
92104[NT][NT][NT][NT]<0.001METALS-0220.001mg/LCobalt-Dissolved
9899[NT][NT][NT][NT]<0.0001METALS-0220.0001mg/LCadmium-Dissolved
9593[NT][NT][NT][NT]<0.001METALS-0220.001mg/LArsenic-Dissolved
103101[NT][NT][NT][NT]<0.01METALS-0220.01mg/LAluminium-Dissolved
23/03/201823/03/2018[NT][NT][NT][NT]23/03/2018-Date analysed
23/03/201823/03/2018[NT][NT][NT][NT]23/03/2018-Date prepared
208454-15LCS-1RPDDup.Base#BlankMethodPQLUnitsTest Description
Spike Recovery %DuplicateQUALITY CONTROL: Dissolved Metals in Water
MPL Reference: 208454
R00Revision No:
Page | 15 of 26
Client Reference: Water and Sediment Analysis
[NT][NT]0<0.01<0.011[NT]INORG-0640.01%w/w Ss-Net Acidity
[NT][NT]NTNT1[NT]INORG-0640.01%w/w Ss-SNAS
[NT][NT]NTNT1[NT]INORG-0645moles H+ /ta-SNAS
[NT][NT]NTNT1[NT]INORG-0640.005%w/w SSNAS
[NT][NT]0221[NT]INORG-064Fineness Factor
[NT][NT]220.150.121[NT]INORG-0640.005%w/w Ss-ANCE
[NT][NT]220.50.41[NT]INORG-0640.01% CaCO3 ANCE
[NT][NT]290.0540.0721[NT]INORG-0640.005%w/w Ss-MgA
[NT][NT]2834451[NT]INORG-0645moles H+ /ta-MgA
[NT][NT]290.0410.0551[NT]INORG-0640.005%w/w MgMgA
[NT][NT]0<0.005<0.0051[NT]INORG-0640.005%w/w Ss-CaA
[NT][NT]0<5<51[NT]INORG-0645moles H+ /ta-CaA
[NT][NT]0<0.005<0.0051[NT]INORG-0640.005%w/w CaCaA
[NT][NT]0<5<51[NT]INORG-0645moles H+ /ta-SPOS
[NT][NT]0<0.005<0.0051[NT]INORG-0640.005%w/w SSPOS
[NT][NT]0<0.01<0.011[NT]INORG-0640.01%w/w Ss-TSA
[NT][NT]0<0.01<0.011[NT]INORG-0640.01%w/w Ss-TPA
[NT][NT]0<0.01<0.011[NT]INORG-0640.01%w/w Ss-TAA
[NT][NT]0<5<51[NT]INORG-0645moles H+ /tTSA
[NT][NT]NTNT1[NT]INORG-0640.005%w/w SSHCl
[NT][NT]1591781[NT]INORG-0645moles H+ /ta-ANCE
[NT][NT]100.280.311[NT]INORG-0640.005%w/wMgP
[NT][NT]40.250.261[NT]INORG-0640.005%w/wCaP
[NT][NT]20.400.411[NT]INORG-0640.005%w/wSP
[NT][NT]40.240.251[NT]INORG-0640.005%w/wMgKCl
[NT][NT]40.270.281[NT]INORG-0640.005%w/wCaKCl
[NT][NT]20.470.481[NT]INORG-0640.005%w/w SSKCl
[NT]950<5<51[NT]INORG-0645moles H+ /tTPA
[NT]9307.37.31[NT]INORG-064pH unitspH Ox
[NT]1190<5<51[NT]INORG-0645moles H+ /tTAA
[NT]9708.78.71[NT]INORG-064pH unitspH kcl
[NT]06/04/201806/04/201806/04/2018106/04/2018-Date analysed
[NT]22/03/201822/03/201822/03/2018122/03/2018-Date prepared
[NT]LCS-1RPDDup.Base#BlankMethodPQLUnitsTest Description
Spike Recovery %DuplicateQUALITY CONTROL: sPOCAS
MPL Reference: 208454
R00Revision No:
Page | 16 of 26
Client Reference: Water and Sediment Analysis
[NT][NT]0<0.75<0.751[NT]INORG-0640.75kg CaCO3 /tLiming rate without ANCE
[NT][NT]0<5<51[NT]INORG-0645moles H+ /ta-Net Acidity without ANCE
[NT][NT]0<0.01<0.011[NT]INORG-0640.01%w/w SNet Acidity (WA)
[NT][NT]0<0.75<0.751[NT]INORG-0640.75kg CaCO3 /tLiming rate
[NT][NT]0<5<51[NT]INORG-0645moles H+ /ta-Net Acidity
[NT]LCS-1RPDDup.Base#BlankMethodPQLUnitsTest Description
Spike Recovery %DuplicateQUALITY CONTROL: sPOCAS
MPL Reference: 208454
R00Revision No:
Page | 17 of 26
Client Reference: Water and Sediment Analysis
[NT][NT]0<0.01<0.0111[NT]INORG-0640.01%w/w Ss-Net Acidity
[NT][NT]NTNT11[NT]INORG-0640.01%w/w Ss-SNAS
[NT][NT]NTNT11[NT]INORG-0645moles H+ /ta-SNAS
[NT][NT]NTNT11[NT]INORG-0640.005%w/w SSNAS
[NT][NT]02211[NT]INORG-064Fineness Factor
[NT][NT]00.150.1511[NT]INORG-0640.005%w/w Ss-ANCE
[NT][NT]00.50.511[NT]INORG-0640.01% CaCO3 ANCE
[NT][NT]0<0.005<0.00511[NT]INORG-0640.005%w/w Ss-MgA
[NT][NT]0<5<511[NT]INORG-0645moles H+ /ta-MgA
[NT][NT]0<0.005<0.00511[NT]INORG-0640.005%w/w MgMgA
[NT][NT]0<0.005<0.00511[NT]INORG-0640.005%w/w Ss-CaA
[NT][NT]0<5<511[NT]INORG-0645moles H+ /ta-CaA
[NT][NT]0<0.005<0.00511[NT]INORG-0640.005%w/w CaCaA
[NT][NT]0<5<511[NT]INORG-0645moles H+ /ta-SPOS
[NT][NT]0<0.005<0.00511[NT]INORG-0640.005%w/w SSPOS
[NT][NT]0<0.01<0.0111[NT]INORG-0640.01%w/w Ss-TSA
[NT][NT]0<0.01<0.0111[NT]INORG-0640.01%w/w Ss-TPA
[NT][NT]0<0.01<0.0111[NT]INORG-0640.01%w/w Ss-TAA
[NT][NT]0<5<511[NT]INORG-0645moles H+ /tTSA
[NT][NT]NTNT11[NT]INORG-0640.005%w/w SSHCl
[NT][NT]0919111[NT]INORG-0645moles H+ /ta-ANCE
[NT][NT]20.450.4411[NT]INORG-0640.005%w/wMgP
[NT][NT]30.710.7311[NT]INORG-0640.005%w/wCaP
[NT][NT]20.981.011[NT]INORG-0640.005%w/wSP
[NT][NT]20.450.4611[NT]INORG-0640.005%w/wMgKCl
[NT][NT]10.870.8811[NT]INORG-0640.005%w/wCaKCl
[NT][NT]01.31.311[NT]INORG-0640.005%w/w SSKCl
[NT][NT]0<5<511[NT]INORG-0645moles H+ /tTPA
[NT][NT]07.27.211[NT]INORG-064pH unitspH Ox
[NT][NT]0<5<511[NT]INORG-0645moles H+ /tTAA
[NT][NT]08.48.411[NT]INORG-064pH unitspH kcl
[NT][NT]06/04/201806/04/201811[NT]-Date analysed
[NT][NT]22/03/201822/03/201811[NT]-Date prepared
[NT][NT]RPDDup.Base#BlankMethodPQLUnitsTest Description
Spike Recovery %DuplicateQUALITY CONTROL: sPOCAS
MPL Reference: 208454
R00Revision No:
Page | 18 of 26
Client Reference: Water and Sediment Analysis
[NT][NT]0<0.75<0.7511[NT]INORG-0640.75kg CaCO3 /tLiming rate without ANCE
[NT][NT]0<5<511[NT]INORG-0645moles H+ /ta-Net Acidity without ANCE
[NT][NT]0<0.01<0.0111[NT]INORG-0640.01%w/w SNet Acidity (WA)
[NT][NT]0<0.75<0.7511[NT]INORG-0640.75kg CaCO3 /tLiming rate
[NT][NT]0<5<511[NT]INORG-0645moles H+ /ta-Net Acidity
[NT][NT]RPDDup.Base#BlankMethodPQLUnitsTest Description
Spike Recovery %DuplicateQUALITY CONTROL: sPOCAS
MPL Reference: 208454
R00Revision No:
Page | 19 of 26
Client Reference: Water and Sediment Analysis
[NT][NT]0<0.005<0.00511[NT]INORG-0680.005%w/wChromium Reducible Sulfur
[NT][NT]RPDDup.Base#BlankMethodPQLUnitsTest Description
Spike Recovery %DuplicateQUALITY CONTROL: Chromium Reducible Sulphur
[NT]960<0.005<0.0051[NT]INORG-0680.005%w/wChromium Reducible Sulfur
[NT]LCS-1RPDDup.Base#BlankMethodPQLUnitsTest Description
Spike Recovery %DuplicateQUALITY CONTROL: Chromium Reducible Sulphur
MPL Reference: 208454
R00Revision No:
Page | 20 of 26
Client Reference: Water and Sediment Analysis
[NT]10800.002<0.0021<0.002AVS-SEM0.002µmole/g dry weight
Thorium
[NT]105400.30.21<0.2Ext-0540.2µmole/g dry weight
Lithium
[NT]101249.37.31<0.02AVS-SEM0.02µmole/g dry weight
Iron
[NT]10100.070.071<0.02AVS-SEM0.02µmole/g dry weight
Zinc
[NT]1080<0.05<0.051<0.05AVS-SEM0.05µmole/g dry weight
Uranium*
[NT]960<0.2<0.21<0.2Ext-0540.2µmole/g dry weight
Selenium
[NT]98180.006<0.0051<0.005AVS-SEM0.005µmole/g dry weight
Lead
[NT]100290.030.041<0.02AVS-SEM0.02µmole/g dry weight
Nickel
[NT]10002.02.01<0.2Ext-0540.2µmole/g dry weight
Manganese
[NT]99400.020.031<0.02AVS-SEM0.02µmole/g dry weight
Copper
[NT]99220.040.051<0.01AVS-SEM0.01µmole/g dry weight
Chromium
[NT]980<0.01<0.011<0.01AVS-SEM0.01µmole/g dry weight
Cadmium
[NT]980<0.05<0.051<0.05AVS-SEM0.05µmole/g dry weight
Arsenic
[NT]720<0.5<0.51<0.5Ext-0540.5µmole/g dry weight
Acid Volatile Sulphur
[NT]LCS-1RPDDup.Base#BlankMethodPQLUnitsTest Description
Spike Recovery %DuplicateQUALITY CONTROL: Acid Volatile Sulphur
MPL Reference: 208454
R00Revision No:
Page | 21 of 26
Client Reference: Water and Sediment Analysis
[NT][NT]00.0030.00311[NT]AVS-SEM0.002µmole/g dry weight
Thorium
[NT][NT]00.40.411[NT]Ext-0540.2µmole/g dry weight
Lithium
[NT][NT]6333511[NT]AVS-SEM0.02µmole/g dry weight
Iron
[NT][NT]180.100.1211[NT]AVS-SEM0.02µmole/g dry weight
Zinc
[NT][NT]0<0.05<0.0511[NT]AVS-SEM0.05µmole/g dry weight
Uranium*
[NT][NT]0<0.2<0.211[NT]Ext-0540.2µmole/g dry weight
Selenium
[NT][NT]220.0160.02011[NT]AVS-SEM0.005µmole/g dry weight
Lead
[NT][NT]00.030.0311[NT]AVS-SEM0.02µmole/g dry weight
Nickel
[NT][NT]52.02.111[NT]Ext-0540.2µmole/g dry weight
Manganese
[NT][NT]180.050.0611[NT]AVS-SEM0.02µmole/g dry weight
Copper
[NT][NT]120.090.0811[NT]AVS-SEM0.01µmole/g dry weight
Chromium
[NT][NT]0<0.01<0.0111[NT]AVS-SEM0.01µmole/g dry weight
Cadmium
[NT][NT]0<0.05<0.0511[NT]AVS-SEM0.05µmole/g dry weight
Arsenic
[NT][NT]0<0.5<0.511[NT]Ext-0540.5µmole/g dry weight
Acid Volatile Sulphur
[NT][NT]RPDDup.Base#BlankMethodPQLUnitsTest Description
Spike Recovery %DuplicateQUALITY CONTROL: Acid Volatile Sulphur
MPL Reference: 208454
R00Revision No:
Page | 22 of 26
Client Reference: Water and Sediment Analysis
[NT][NT]0100001000011[NT]INORG-0361000mg/kgTotal Organic Carbon (Walkley Black)
[NT][NT]03/04/201803/04/201811[NT]-Date analysed
[NT][NT]03/04/201803/04/201811[NT]-Date prepared
[NT][NT]RPDDup.Base#BlankMethodPQLUnitsTest Description
Spike Recovery %DuplicateQUALITY CONTROL: Miscellaneous Inorg - soil
95983770075001<1000INORG-0361000mg/kgTotal Organic Carbon (Walkley Black)
03/04/201803/04/201803/04/201803/04/2018103/04/2018-Date analysed
03/04/201803/04/201803/04/201803/04/2018103/04/2018-Date prepared
208454-2LCS-1RPDDup.Base#BlankMethodPQLUnitsTest Description
Spike Recovery %DuplicateQUALITY CONTROL: Miscellaneous Inorg - soil
MPL Reference: 208454
R00Revision No:
Page | 23 of 26
Client Reference: Water and Sediment Analysis
Not ReportedNR
National Environmental Protection MeasureNEPM
Not specifiedNS
Laboratory Control SampleLCS
Relative Percent DifferenceRPD
Greater than>
Less than<
Practical Quantitation LimitPQL
Insufficient sample for this testINS
Test not requiredNA
Not testedNT
Result Definitions
Australian Drinking Water Guidelines recommend that Thermotolerant Coliform, Faecal Enterococci, & E.Coli levels are less than1cfu/100mL. The recommended maximums are taken from "Australian Drinking Water Guidelines", published by NHMRC & ARMC2011.
Surrogates are known additions to each sample, blank, matrix spike and LCS in a batch, of compounds whichare similar to the analyte of interest, however are not expected to be found in real samples.
Surrogate Spike
This comprises either a standard reference material or a control matrix (such as a blank sand or water) fortifiedwith analytes representative of the analyte class. It is simply a check sample.
LCS (LaboratoryControl Sample)
A portion of the sample is spiked with a known concentration of target analyte. The purpose of the matrix spikeis to monitor the performance of the analytical method used and to determine whether matrix interferencesexist.
Matrix Spike
This is the complete duplicate analysis of a sample from the process batch. If possible, the sample selectedshould be one where the analyte concentration is easily measurable.
Duplicate
This is the component of the analytical signal which is not derived from the sample but from reagents,glassware etc, can be determined by processing solvents and reagents in exactly the same manner as forsamples.
Blank
Quality Control Definitions
MPL Reference: 208454
R00Revision No:
Page | 24 of 26
Client Reference: Water and Sediment Analysis
Measurement Uncertainty estimates are available for most tests upon request.
Where sampling dates are not provided, Envirolab are not in a position to comment on the validity of the analysis whererecommended technical holding times may have been breached.
When samples are received where certain analytes are outside of recommended technical holding times (THTs), the analysis hasproceeded. Where analytes are on the verge of breaching THTs, every effort will be made to analyse within the THT or as soon aspracticable.
In circumstances where no duplicate and/or sample spike has been reported at 1 in 10 and/or 1 in 20 samples respectively, thesample volume submitted was insufficient in order to satisfy laboratory QA/QC protocols.
Matrix Spikes, LCS and Surrogate recoveries: Generally 70-130% for inorganics/metals; 60-140% for organics (+/-50% surrogates)and 10-140% for labile SVOCs (including labile surrogates), ultra trace organics and speciated phenols is acceptable.
Duplicates: <5xPQL - any RPD is acceptable; >5xPQL - 0-50% RPD is acceptable.
For VOCs in water samples, three vials are required for duplicate or spike analysis.
Spikes for Physical and Aggregate Tests are not applicable.
Filters, swabs, wipes, tubes and badges will not have duplicate data as the whole sample is generally extracted during sampleextraction.
Duplicate sample and matrix spike recoveries may not be reported on smaller jobs, however, were analysed at a frequency to meetor exceed NEPM requirements. All samples are tested in batches of 20. The duplicate sample RPD and matrix spike recoveries forthe batch were within the laboratory acceptance criteria.
Laboratory Acceptance Criteria
MPL Reference: 208454
R00Revision No:
Page | 25 of 26
Client Reference: Water and Sediment Analysis
Note: Some results have raised pqls. In these cases the sample's high TDS required the sample to be diluted prior to analysis. The samples were diluted by a factor of 50 for metals analysis by ICPMS. Note also that samples 15and 19 were spiked at a concentration of 5ppb as requested. This is much lower than our standard spike amount. The matrix spike results are the recoveries of this 5ppb spike. Manganese recoveries were outside acceptable levels due to the spike anount being much less than the amount in the sample.
Report Comments
MPL Reference: 208454
R00Revision No:
Page | 26 of 26