ep syllabus

91
DELHI TECHNOLOGICAL UNIVERSITY COURSE CURRICULUM & SCHEME OF EXAMINATION for B.TECH. (Engineering Physics) 2009-2013 Semester I Examination November, 2009 Semester II Examination May, 2010 Semester III Examination November, 2010 Semester IV Examination May, 2011 Semester V Examination November, 2011 Semester VI Examination May, 2012 Semester VII Examination November, 2012 Semester VII I Examination May, 2013 1

Upload: akshay-gupta

Post on 08-Nov-2014

92 views

Category:

Documents


6 download

DESCRIPTION

Enginneering Physics DTU Syllabus

TRANSCRIPT

Page 1: EP Syllabus

DELHI TECHNOLOGICAL UNIVERSITY

COURSE CURRICULUM & SCHEME OF EXAMINATION for

B.TECH. (Engineering Physics) 2009-2013

Semester I Examination November, 2009Semester II Examination May, 2010Semester III Examination November, 2010Semester IV Examination May, 2011Semester V Examination November, 2011Semester VI Examination May, 2012Semester VII Examination November, 2012Semester VIII Examination May, 2013

1

Page 2: EP Syllabus

ENGINEERING PHYSICS

Summary of Revised Scheme of Examination

Total Credits for B.TECH. Degree: 240

Semester wise: I-30, II-30, III-30, IV-30, V-30, VI-30, VII-30, VIII-30

Classification of Subjects:

Subjects H A C

I 19 11 00

II 14 16 00

III 03 04 23

IV 00 04 26

V 00 06 24

VI 00 14 16

VII 00 07 23

VIII 00 00 30

Total Credits 240 36 64 142

PercentageContents of H, A, C

15% 25.83% 59.16%

H Humanities, Social Studies and Basic Sciences

A Allied Engineering

C Core (include major project and practical training also)

Note: Industrial training of 10 weeks durations during summer vacations after 6th

semester and 4 weeks after 7th semester.

2

Page 3: EP Syllabus

SUGGESTED SCHEME FOR B.TECH. FIRST SEMESTER (ENGINEERING PHYSICS)

S.No. Course No. Subject LTP EvaluationSessional End

TotalMarks

CreditType

TH1 MA 101 Mathematics-1 310 30 70 100 4H

TH2 HU 102 Communication skills 210 30 70 100 3H

TH3 EP 103 Applied Physics-I 400 30 70 100 4H

TH4 CH 104 Applied Chemistry 310 30 70 100 4H

TH5 EE 105 Electrical sciences 310 30 70 100 4A

TH6 IT 106 Fundamentals of Information Technology

210 30 70 100 3A

PR1 EP 107 Applied Physics Lab 002 30 70 100 2H

PR2 CH 108 Applied Chemistry Lab 002 30 70 100 2H

PR3 EE 109 Electrical Sciences Lab 002 30 70 100 2A

PR4 IT 110 Information TechnologyLab

002 30 70 100 2A

TOTAL 30 hrs 1000 30

SUGGESTED SCHEME FOR B.TECH. SECOND SEMESTER (ENGINEERING PHYSICS)

S.No. Course No. Subject LTP EvaluationSessional End

TotalMarks

CreditType

TH1 MA 111 Mathematics-II 310 30 70 100 4H

TH2 EN 112 Environmental Sciences 200 30 70 100 2H

TH3 EP 113 Applied Physics-II 400 30 70 100 4H

TH4 AS 114 Engineering Materials 400 30 70 100 4H

TH5 ME 115 Basic Mechanical Engineering

400 30 70 100 4A

TH6 COE 116 Programming Fundamentals 200 30 70 100 2A

PR1 ME 117 Engineering Graphics 003 30 70 100 3A

PR2 ME 118 Mechanical workshop 003 30 70 100 3A

PR3 COE 119 Programming Lab 002 30 70 100 2A

PR4 PE 120 Applied Physics Lab 002 30 70 100 3ATOTAL 30 hrs 1000 30

3

Page 4: EP Syllabus

S.No. Course No.

Subject L T P EvaluationSessional End

TotalMarks

CreditType

TH1 EP 201 Introduction to computing 3 1 0 30 70 100 4CTH2 EP 202 Mathematical Physics 3 1 0 30 70 100 4C

TH3 EP 203 Thermal Physics 3 1 0 30 70 100 4C

TH4 EP 204 Digital Electronics 3 1 0 30 70 100 4C

TH5 EP 205 Engineering Mechanics 3 1 0 30 70 100 4A

TH6 EP 206 Basic Engineering Economics

3 0 0 30 70 100 3H

PR1 EP207 Thermal Physics Lab 0 0 2 30 70 100 2C

PR2 EP 208 Digital Electronics Lab 0 0 2 30 70 100 2C

PR3 EP 209 Computing Lab 0 0 2 30 70 100 2C

VS1 EP 210 Self study 0 1 0 30 70 100 1C

Total 30 hrs 1000 30

SUGGESTED SCHEME FOR B.TECH. THIRD SEMESTER (ENGINEERING PHYSICS)SUGGESTED SCHEME FOR B.TECH. FOURTH SEMESTER (ENGINEERING PHYSICS)

S.No. Course No.

Subject L T P EvaluationSessional End

TotalMarks

CreditType

TH1 EP 211 Classical & Quantum Mechanics

3 1 0 30 70 100 4C

TH2 EP 212 Optics 3 1 0 30 70 100 4C

TH3 EP 213 Signals and systems 3 1 0 30 70 100 4A

TH4 EP 214 Microprocessor & Interfacing 3 0 0 30 70 100 3C

TH5 EP 215 Computational Methods 3 1 0 30 70 100 4C

TH6 EP 216 Condensed Matter Physics 3 1 0 30 70 100 3C

PR1 EP 217 Optics Lab 0 0 2 30 70 100 2C

PR2 EP 218 Solid State Physics Lab 0 0 2 30 70 100 2C

PR3 EP 219 Microprocessor & Interfacing Lab

0 0 2 30 70 100 2C

VS2 EP 220 Self study 0 1 0 30 70 100 1C

4

Page 5: EP Syllabus

Total 30 hrs 1000 30

SUGGESTED SCHEME FOR B.TECH.FIFTH SEMESTER (ENGINEERING PHYSICS)

S.NO Course No

Subject LTP Evaluation Total Credit type

Sessional End

TH1 EP 311 Instrumentation and Control 3 1 0 30 70 100 4A

TH2 EP 312 Fiber optics and optical communication

3 1 0 30 70 100 4C

TH3 EP 313 Quantum Information and Computing

3 1 0 30 70 100 4C

TH4 EP314 Microwave Engineering 3 1 0 30 70 100 4A

TH5 EP 315 Fabrication and Characterization of Nanostructures

3 1 0 30 70 100 4C

PR1 EP316 Fiber optics and optical communication lab

0 0 2 30 70 100 2C

PR2 EP 317 Microwave Engineering Lab 0 0 2 30 70 100 2A

PR4 EP 318 Minor Project-II 0 0 6 50 150 200 4C

PR3 EP 319 Industrial Training - 100 100 2C

Total 30 Hrs 1000 30

SUGGESTED SCHEME FOR B.TECH. SIXTH SEMESTER (ENGINEERING PHYSICS)S.NO Course

NoSubject LTP Evaluation Total Credit

typeSessional End

TH1 EP 301 Atomic and Molecular Physics 3 1 0 30

30

30

30

30

30

30

30

70

70

70

70

70

70

70

70

100 4C

TH2 EP 302 Communication systems 3 1 0 100 4C

TH3 EP 303 Electromagnetic theory, Antennas and Propagation 3 1 0 100 4C

TH4 EP 304 Semiconductor Devices 3 1 0 100 4C

TH5 EP 305 Biophysics 3 1 0 100 4A

PR1 EP 306 Advanced Physics Lab 0 0 2 100 2C

PR2 EP 307 Electromagnetic theory, Antenna and Propagation Lab 0 0 2 100

2C

PR3 EP 308 Communication Systems Lab 0 0 2 100 2A

PR4 EP 309 Minor Project-I 0 0 4 50 150 200 4C

Total 30 Hrs 1000 30

5

Page 6: EP Syllabus

S.NO Course No

Subject LTP Evaluation Total Credit type

Sessional End

TH1 EP 401 Computer Networking 3 1 0 30 70 100 4A

TH2 EP 402 Alternate Energy Storage and conversion devices

3 1 0 30 70 100 4C

TH3 EP 403 Mobile and Satellite Communication

3 1 0 30 70 100 4C

TH4 EP 404 Elective I 3 1 0 30 70 100 4C

TH5 EP 405 Open Elective 3 0 0 30 70 100 3C

PR1 EP 406 Energy Storage and conversion lab

0 0 2 30 70 100 2C

PR2 EP 407 Mobile and Satellite Communication Lab

0 0 2 30 70 100 2C

PR3 EP 408 Major Project (Part-I) 0 0 8 50 150 200 4C

PR4 EP 409 Industrial Training 100 100 4C

Total 30 Hrs 1000 30

SUGGESTED SCHEME FOR B.TECH. SEVENTH SEMESTER (ENGINEERING PHYSICS)

SUGGESTED SCHEME FOR B.TECH. EIGHTH SEMESTER (ENGINEERING PHYSICS) S.NO Course

NoSubject LTP Evaluation Total Credit

typeSessional End

TH1 EP 411 VLSI and FPGA Design Synthesis 3 1 0 30 70 100 4C

TH2 EP 412 Elective II 3 1 0 30 70 100 4C

TH3 EP 413 Open Elective 3 1 0 30 70 100 4C

PR1 EP 414 Elective Lab 0 0 3 30 70 100 3C

PR2 EP 415 FPGA Design Lab 0 0 3 30 70 100 3C

PR3 EP 416 Seminar 0 0 2 100 100 2C

PR4 EP 417 Major project (Part II) 0 0 10 100 300 400 10C

Total 30 hrs 1000 30

6

Page 7: EP Syllabus

List of Electives

MINORS:A. Nano Science and TechnologyB. PhotonicsC. Robotics and Intelligent SystemsD. Nuclear Engineering

(A) MATERIAL SCIENCE AND TECHNOLOGY

A1. Nano Science and Technology

A2. Introduction to SpintronicsA3. Selected topics in Nano Science and Technology

AP3.Materials Growth and Characterization Lab

(B) PHOTONICS

B1. PhotonicsB2.Integrated OpticsB3. Selected topics in photonicsBP3. Photonics Lab

(C) ROBOTICS AND INTELLIGENT SYSTEMS

C1. Introduction to Automation and Motion ControlC2. Robotic EngineeringC3. Selected topics in robotics and intelligent systemsCP3. Robotics Lab

(D) NUCLEAR ENGINEERING

D1. Principles of Nuclear EngineeringD2. Nuclear Materials for Engineering ApplicationsD3. Selected topics in nuclear engineeringDP3. Nuclear Applications Lab

7

Page 8: EP Syllabus

The course structure is designed to award the degree as B.Tech. (Engg. Physics) with majors in Electronics and Communication Technology and minors in any one of the following:

• Nano Science and Technology

• Photonics

• Robotics and Intelligent Systems

• Nuclear Engineering

8

Page 9: EP Syllabus

Course CurriculumB.TECH. I- Year, I Semester ExaminationTheory Paper – I (Common to all Branches)

EE/COE/EC/IC/ME/PE/MPA/CE/ENE/PT/IT/BT L T P Credits

3 1 0 4MA-101 Mathematics – I

UNIT I: Infinite series: Tests for convergence of series (comparison, ratio, root, integral, Raabe’s, logarithmic), Alternating series, Absolute convergence, Conditional convergence. (5L)

UNIT II: Calculus of single variable: Taylor’s & Maclaurin’s expansion, Radius of curvature, applications of definite integral to area, arc length, surface area and volume (in Cartesian, parametric and polar co-ordinates). (8L)

UNIT III: Calculus of several variables: Partial differentiation, Euler’s theorem, total differential, Taylor’s theorem, Maxima-Minima, Lagrange’s method of multipliers, Application in estimation of error and approximation. (7L)

UNIT IV: Multiple Integrals: Double integral (Cartesian and polar co-ordinates), change of order of integration, triple integrals (Cartesian, cylindrical and spherical co-ordinates), Gamma and Beta functions. Applications of multiple integration in area, volume, centre of mass, and moment of inertia. (8L)

UNIT V: Vector Calculus: Continuity and differentiability of vector functions, Scalar and vector point function, Gradient, Directional Derivative, divergence, curl and their applications. Line integral, surface integral and volume integral, applications to work done by the force . Applications of Green’s, Stoke’s and Gauss divergence theorems. (8L)

UNIT VI: Function of Complex Variable: Definition of complex function. Circular, Hyperbolic, and Logarithmic functions. Inverse of Circular, and Hyperbolic functions. (4L)

Text Books/Reference Books:

1. “Advanced Engineering Mathematics” by Alan Jeffery ; Academic Press

2. “Calculus and Analytic Geometry” by Thomas/Finney; Narosa.

3. “Advanced Engineering Mathematics” by Kreyszig; Wiley.

4. “Advanced Engineering Mathematics” by Taneja ; I K international

5. “Advanced Engineering Mathematics” by Jain/Iyenger; Narosa.

9

Page 10: EP Syllabus

Course CurriculumB.TECH. I- Year, I Semester Examination

Theory Paper –II (Common to all Branches) EE/COE/EC/IC/ME/PE/MPA/CE/ENE/PT/IT/BT

L T P Credit 2 1 0 3

HU-102 Communication Skills

UNIT I: Functional English:

(A) Parts of speech; Tense and concord; Conditional clauses; Question tags & short responses; Punctuation; Common errors.(B) Vocabulary and Usage: Synonyms & Antonyms; One word substitutions; Words often confused; Idioms / Idiomatic expressions.

UNIT II: Basics of Writing:

(A) Presentation of Technical Information: Technical description of simple objects, tools, appliances; Processes and operations; Scientific Principles; Definitions ; Interpretation of Visual Data (graph, charts etc)(B) Writing of: Paragraph; Summary and Abstract; Taking and Making Notes. (C) Comprehension of Unseen Passages based on reading exercises like Skimming, Scanning and Inference making.

UNIT III: Oral Communication:

Phonetics: Speech Sounds and their articulation; Phonemes, syllable, Stress, Transcription of Words and Simple Sentences; Presentation and Seminar; Language Lab Practice for Oral Communication.

UNIT IV: Texts for Appreciation and Analysis:

(A) Wings of Fire by APJ Abdul Kalam(B) The Fortune at the Bottom of the Pyramid by C.K. Prahalad.(C) The Branded (Uchalya) by Laxman Gaikwad(D) Geetanjali by Ravindranath Tagore.

Text Books/Reference Books:

1. Day, Robert A. Scientific English: A Guide for Scientists and Other Professionals. UP.2. Maison Margaret , Examine Your English, New Delhi: Orient Longman.3. Tikoo M.L., A.E. Subramaniam and P.R. Subramaniam. Intermediate Grammar Usage and

Composition. Delhi: Orient Longman.4. Weiss, Edmond H. Writing Remedies: Practical Exercises for Technical Writing.

University Press. 5. Lesikar and Flatley. Business Communications. New Delhi, Biztantra Press.6. O’Connor, Better English Pronunciation, Cambridge: Cambridge University Press.7. Gaikwad, Laxman, The Branded, Delhi: Sahitya Akademi.8. Kalam, APJ Abdul, Wings of Fire, Delhi: University Press.9. C.K. Prahalad, The Fortune at the Bottom of the Pyramid, Wharton School Publishing.10. Rabindranath Tagore, Gitanjali, Filiquarian Publishing, LLC.

10

Page 11: EP Syllabus

Course CurriculumB.TECH.I –year, I- Semester Examination

Theory Paper – III (Common to all Branches) EE/COE/EC/IC/ME/PE/MPA/CE/ENE/PT/IT/BT

L T P Credits 3 1 0 4

EP – 103 Applied Physics

UNIT I: Relativity: Review of concepts of frames of reference and Galilean transformation equation, Michelson – Morley experiment and its implications, Einstein’s special theory of relativity, Lorentz transformation equations, Law of addition of velocities, Mass variation with velocity, Concept of energy and momentum, Mass energy relation.

UNIT II: Oscillations, waves:Damped and forced oscillations, Resonance (amplitude and power), Q – factor, Sharpness of resonance. Equations of longitudinal and transverse waves and their solutions, Impudence, Reflection and transmission of waves at a boundary, Impedance matching between two medium.

UNIT III: Physical optics:Interference by division of wave front and amplitude, Multiple beam interference and Fabry-Perot interferometer, Fresnel diffraction through a straight edge, Fraunhoffer diffraction, Zone plate, single slit and N-slit / grating, Resolving power of telescope, prism and grating. Polarization by reflection and by transmission, Brewster’s law, Double refraction, elliptically and circularly polarized light, Nichol prism, Quarter and half wave plates.

UNIT IV: Optical Instruments:Cardinal points of co-axial lens systems, spherical and chromatic aberrations and their removal, Huygens and Ramsden’s eyepiece.

UNIT V: Laser optics:Coherence and coherent properties of laser beams, Brief working principal of lasers, Spontaneous and stimulated emission, Einstein’s co-efficient, Ruby laser, He-Ne laser.

UNIT VI: Optical Fiber:Classification of optical fibers, Refractive index profile, Core cladding refractive index difference, Numerical aperture of optical fiber, Pulse dispersion in optical fiber (ray theory).

Text Books/Reference Books:

1. “Physics of Vibrations and Waves” by H.J. Pain.

2. “Vibrations and Waves” by A.P. French.

3. “Perspective of Modern Physics” by Authors Beiser.

4. “Optics” by A. Ghatak.

5. Berkley Physics Course Vol – 1.

Page 12: EP Syllabus

Course CurriculumB.TECH. I year, I- Semester Examination

Theory Paper – IV (Common to all Branches) EE/COE/EC/IC/ MPA/CE/ENE/PT/IT/BT ME/PE

L T P Credits 3 1 0 4

CH-104 Applied Chemistry

UNIT I: (a) Conventional Analysis: Volumetric Analysis, Types of titrations, Theory of indicators.2L

(b) Spectral Analysis: Electromagnetic radiation, Lambert-Beer’s Law, UV-VIS, IR, instrumentation & applications. 4L

UNIT II: Thermal Methods of Analysis: principle, working and applications of Thermogravimetry, Differential thermal analysis and Differential scanning calorimetry. 4L

UNIT III: (a) Polymers: Monomer & polymer, functionality and Degree of Polymerization. Mechanism of polymerization. Molecular weights of polymers. Methods of polymerization. Industrial production of PE and PF resins. Industrial applications of polymers. 6L

(b) Bio-molecules: Classification, Structure, physical and chemical properties of Amino-acids, Peptides and Proteins, Carbohydrates, Cellulose and its derivatives, RNA, DNA. Introduction to Bio-degradable Polymers. 6L

UNIT IV: Electrochemistry: Electrochemical cells: components, characteristics of batteries. Primary and Secondary battery systems: Zinc-Carbon cells, Lead storage and lithium batteries. Fuel Cells, Electro-deposition: Electrical and chemical requirements. Electroplating bath and linings. Agitation, Circulation and filteration equipment. Plating of copper, gold and rhodium. 8L

UNIT V: Phase Equilibrium: Definitions of Phase, component and degree of freedom, Gibb’s phase rule. One component systems: Water and sulphur. Two component systems: Pb-Ag and Cu-Ni system.

6LUniv VI: Green Chemistry: Introduction, Goals & Significance of Green Chemistry. Reagents, solvents and catalysts for green synthesis. Principles of Green Chemistry, Evaluation of feedstocks, reaction types and methods. Future trends in Green Chemistry. 4L

Text Books/Reference Books:

1. “Thermal Analysis” by T. Hatakeyama, F.X. Quinn; Wiley.2. “ Inorganic Quantitative Analysis” by A.I. Vogel.3. “Instrumental Method of Analysis” by Skoog D.A.; HRW International.4. “Green Chemistry: Theory & Practice” by P.T. Anastas & JC Warner; Oxford Univ Press.5. “Polymer Science and Technology” by Billmeyer; John Wiley.6. “Polymer Science and Technology” by Fried; Prentice Hall.

Page 13: EP Syllabus

Course CurriculumB.TECH.I year, I Semester Examination

Theory Paper-V (Common to all Branches) EE/COE/EC/IC/ MPA/CE/ENE/PT/IT/BT ME/PE

L T P Credits 3 1 0 4

EE – 105 Electrical SciencesUNIT I: Introduction: Role and importance of circuits in Engineering, concept of fields, charge, current, voltage, energy and there interrelationship. V-I characteristics of ideal voltage and ideal current sources, various types of controlled sources. Passive circuit components: V-I characteristics and ratings of different types of R, L, C elements.UNIT II: DC Network: Series circuits and parallel circuits, power and energy, Kirchoff’s Laws. Delta-star conversion, Superposition Theorem, Thevenin’s Theorem, Norton’s theorem, Maximum Power Transfer Theorem, Tellgen Theorem.UNIT III: Single Phase AC Circuits: Single phase EMF generation, average and effective values of sinusoids, complex representation of impedance, series and parallel circuits, concept of phasor, phasor diagram, power factor, power in complex notation, real power, reactive power and apparent power. Resonance in series and parallel circuits, Q-factor, bandwidth and their relationship, half power points.

UNIT IV: Three-Phase AC Circuits: Three phase EMF generation, delta and Y connection, line and phase quantities. Solution of three phase circuits: balanced supply voltage and balanced load, phasor diagram, measurement of power in three phase circuits.

UNIT V: Magnetic Circuits & Transformers:Amperes circuital law, B-H curve, concept of reluctance, flux, MMF, analogies between electrical and magnetic quantities solution of magnetic circuits. Hysteresis and eddy current losses, application of magnetic force, mutual inductance and dot convention. Single phase Transformer construction, principle of working, auto transformer and their applications.

UNIT VI: Three Phase Induction Motor: Construction, Principle of operation, types of motors applications.

UNIT VII: Equipment and Machine Power supply basics: Electric wiring, power distribution and utilization: Neutral, grounding & phase definitions, colour coding, of cable, IS standards for domestic and industrial cable/wiring, conduct and cable wiring, MCB, ELCB, industrial and domestic sockets, plug, etc. Fuses, their types characteristics, introduction to energy efficient lighting and energy conservation.

UNIT VIII: Measuring Instruments: Analog indicating instruments, devices, Damping devices, PMMC ammeters and voltmeters, shunt and multipliers, Moving iron ammeter and voltmeters, dynamometer type wattmeters, multimeters, AC watt-hour meters. Digital electronic voltmeters, digital electronic ammeters and wattmeters.

Text Books/Reference Books:

1. “Basic electrical Engineering” by C.L. Wadhwa, 4th Edition; New Age International.2. “Basic Electrical Engineering” by Fitzereld, Higgenbotham & Grabel; McGraw Hill

International.3. “Electrical Engineering Fundamentals” by Vincent Deltoro; Prentice Hall International (EEI).4. Relevant Indian Electricity Supply rules & BIS codes.

Page 14: EP Syllabus

Course CurriculumB.TECH.I year, I Semester Examination

Theory Paper-VI (Common to all Branches)EE/COE/EC/IC/ MPA/CE/ENE/PT/IT/BT ME/PE

L T P Credits 2 1 0 3

IT – 106 Introductions to Information Technology

UNIT – I : Fundamental Concepts of Information: Definition of information, Data Vs Information, Introduction to Information representation in Digital Media, Text, image, graphics, Animation, Audio, Video etc., Need, Value and Quality of information

UNIT – II : Concepts in Computer & Programming: Definition of Electronic Computer, History, Generations, Characteristic and Application of Computers, Classification of Computers, Memory, different types of memory, Computer Hardware - CPU, Various I/O devices, Peripherals, Firmware and Humanware.

UNIT – III : Programming Language Classification & Program Methodology: Computer Languages, Generation of Languages, Translators, Interpreters, Compilers, Flow Charts, Dataflow Diagram, Assemblers, Introduction to 4GL and 5GL.

UNIT – IV : Digital Devices and Basic Network Concepts: Digital Fundamentals: Various codes, decimal, binary, hexa-decimal conversion, floating numbers gates, flip flops, adder, multiplexes, Introduction to Data Transmission.

UNIT – V : Data Communication & Networks: Computer Networks- Introduction of LAN, MAN and WAN. Network Topologies, Client-server Architecture.

UNIT – VI : Internet and Web Technologies: Hypertext Markup Language, DHTML, WWW, HTTP, Gopher, FTP, Telnet, Web Browsers, Net Surfing, Search Engines, Email, Safety of Business Transaction on web. Elementary Concepts of E-Learning and E-Commerce, Electronic Payment Systems, Digital Signatures, Firewall.

Text Books/Reference Books:

1. “Using Information Technology: A Practical Introduction to Computers & Communications” by William Sawyer & Hutchinson; Publisher: Tata McGraw-Hill.

2. ‘Introduction to Computers’ by Peter Norton; Tata McGraw-Hill.3. “Introduction to Computers” by Rajaraman; EPI.4. “Data Compression” by Nelson; BPB.5. “Internet, An introduction”by CIS Tems; Tata McGraw Hill.6. “Information Technology: Breaking News” by Curtin; TMH.7. “Fundamentals of Information Technology” by Leon & Leon; Vikas.8. “Internet 101” by Lehngart; Addison Wesley.

Page 15: EP Syllabus

Course CurriculumB.TECH.I year, I Semester Examination

Practical Paper I (Common to all Branches) EE/COE/EC/IC/ MPA/CE/ENE/PT/IT/BT ME/PE

EP-107 Physics Lab

Based on course work corresponding EP-103

L T P Credits 0 0 2 02

Course CurriculumB.TECH.I year, I Semester Examination

Practical Paper II (Common to all Branches)EE/COE/EC/IC/ MPA/CE/ENE/PT/IT/BT ME/PE

CH-108 Chemistry Lab

Based on course work corresponding CH-104

` L T P Credits 0 0 2 02

Course CurriculumB.TECH.I year, I Semester Examination

Practical Paper III (Common to all Branches)EE/COE/EC/IC/ MPA/CE/ENE/PT/IT/BT ME/PE

EE-109 Electrical Sciences Lab

Based on course work corresponding EE-105

L T P Credits 0 0 2 02

Course CurriculumB.TECH.I year, I Semester Examination

Practical Paper IV (Common to all Branches)EE/COE/EC/IC/ MPA/CE/ENE/PT/IT/BT ME/PE

IT-110 Fundamental of IT Lab

Based on course work corresponding IT-106

L T P Credits 0 0 2 02

Page 16: EP Syllabus
Page 17: EP Syllabus

Course CurriculumB.TECH.I year, II Semester Examination

Theory Paper-I (Common to all Branches)EE/COE/EC/IC/ MPA/CE/ENE/PT/IT/BT ME/PE

L T P Credits 2 1 0 3

MA- 111 Mathematics-II

Matrices: Rank of a matrix, inverse of a matrix using elementary transformations, consistency of linear system of equations; Eigen-values and eigenvectors of a matrix, Cayley Hamilton theorem, diagonalization of matrix. (8L)

Ordinary differential equations: Bernoulli’s equation, Second & higher order linear differential equations with constant coefficients, General solution of homogenous and non- homogenous equations, method of variation of parameters, Euler-Cauchy equation, simultaneous linear equations, power series method, Frobenious method, Legendre equation, Legendre polynomials, Bessel equation. (16L)

Laplace Transforms: Basic properties, Laplace transform of derivatives and integrals, Inverse Laplace transform, Differentiation and Integration of Laplace transform, Convolution theorem, UNIT step function, Periodic function, Laplace transform solution of IVP and system of linear differential equations. (6L)

Fourier series and Transforms: Fourier series, Dirichlet conditions, Even and odd functions, half range series, harmonic analysis, Fourier Transforms, Sine and Cosine Transforms, Transforms of derivatives and integrals, Applications to boundary value problem in ordinary differential equations (simple cases only).

(10L)Text Books/Reference Books:

1. “Advanced Engineering Mathematics” by Greenberg; Pearson Education.

2. “Advanced Engineering Mathematics” by Kreyszig; Wiley.

3. “Advanced Engineering Mathematics” by Taneja; I K international.

4. “Advanced Engineering Mathematics” by Jain/Iyenger; Narosa.

Page 18: EP Syllabus

Course CurriculumB.TECH.I year, II Semester Examination

Theory Paper-II (Common to all Branches) EE/COE/EC/IC/ MPA/CE/ENE/PT/IT/BT ME/PE

L T P Credits2 0 0 2

EN – 112 Environmental Science

UNIT I: Introduction to Environment: Origin & evolution of earth, segments of environment- lithosphere, hydrosphere, atmosphere & biosphere, Biogeochemical cycles- geologic, hydrological, oxygen, nitrogen, carbon & phosphate cycles.

UNIT II: Ecosystems: Concept of ecosystem biotic & abiotic components, types of ecosystems, functional components of ecosystem- biodiversity, productivity, food chains & food webs, material cycling and energy flow, different ecosystems- forest, grassland, desert, aquatic.

UNIT III: Water Pollution: Water quality, physical, chemical & biological characteristics of water & waste water, ground water pollution, water borne diseases.

UNIT IV : Air & Noise Pollution: Primary & secondary air pollutants, sources, effects & control of- carbon monoxide, nitrogen oxides, hydrocarbons, sulphur dioxide & particulates, Air quality standards, global warming, acid rain, El Nino, ozone hole. Classification and measurement of noise, effects of noise pollution on human, control of noise pollution.

UNIT V: Energy & Solid Waste Management: Conventional energy resources- coal, thermal, petroleum, hydroelectricity, nuclear power, wood, non conventional sources- solar, biogas, wind, ocean & tidal energy, geothermal energy. Hazardous and non hazardous solid waste management. Environmental laws and acts.

Text Books/Reference Books:

1. “Environmental Studies” by De Anil Kumar & De Arnab Kumar; New Age International (P) Ltd.2. “Environmental Studies” by Basak Anindita; Pearson Education South Asia.3. “A Text Book of Environmental Science” by Subramanian. V; Narosa Publishing House.4. “Essentials of Ecology & Environment Science” by Rana. S.V.S.; EPI Publications.

Page 19: EP Syllabus

Course Curriculum B.TECH. I- Year, II- Semester Examination

Theory Paper- III, (Common to all Branches)EE/COE/EC/IC/ MPA/CE/ENE/PT/IT/BT ME/PE

L T P Credits4 0 0 4

EP – 113 Applied Physics II

UNIT— I: Quantum Physics.

Failure of classical physics ,Compton effect , Pair production de-broglie relation, wave function, Probability density, Schrodinger wave equation operators, expection values and eigen value equation, particle in a box, simple harmonic oscillator problem, concept of degeneracy.

UNIT—II: Clasical Statistic.

Statistical physics : Microscopic macroscopic systems, concept of phase space basic postulates of statistical mechanics, Maxwell—Boltzmann distribution law.

UNIT—III: Quantum statistic.

Quantum Statistics: Fermi—Dirac and Bose –Einstein Distribution, Fermi- Dirac probability function, Fermi energy level.

UNIT—IV: Nuclear Physics.

Nuclear properties, constituent of the nucleus, binding energy, stable nuclei, radioactive decay law (alpha and beta spectrum), Q-value of nuclear reaction , nuclear models-liquid drop and shell model, nuclear fission and fusion, elementary ideas of nuclear reactors.

UNIT—V: Electrodynamics.

Maxwell’s equations, concept of displacement current, Derivation of wave equation for plane electromagnetic wave, Pointing vector. Pointing theorem, Energy density, wave equation in dielectric & conducting media.

Text Books/Reference Books:

1. “Nuclear Physics” by Erwin Kaplan.2. “Concept of Nuclear Physics” by Cohen.3. “Electrodynamics” by Griffith.4. “Electricity & magnetism” by Rangawala & Mahajan.5. “Perspective of Modern Physics” by Arthur Beiser.

Page 20: EP Syllabus

Course Curriculum B.TECH. I- Year, II- Semester Examination Theory Paper- IV, (Common to all Branches)

EE/COE/EC/IC/ MPA/CE/ENE/PT/IT/BT ME/PEL T P Credits 4 0 0 4

AS- 114 Engineering Materials

SECTION – A (Physics)

Crystal Structure: Bravis lattices; Miller indices, simple crystal structures, Different kind of bending.Metallic Conduction: Energy distribution of electrons in a metal, Fermi level, Conduction process.Semi Conductors: Band theory of solids , P and N type of semiconductors , Statistics of holes and electrons , Hall effect , Effect of temperature on conductivity , Life time and recombination ,draft and diffusion in PN junction .Dielectric and Optical properties of Materials: Dielectric polarization and dielectric constant, optical absorption process.Magnetism and Superconducting Materials: Dia-para , Ferro-magnetism , Antiferro , Ferro-magnetism ferrites, Superconducting materials , Properties , Type of superconducting materials , Meissner effect , High- Tc superconductor , application.

SECTION – B (CHEMISTRY)Water treatment: Impurities in water, hardness of water, determination and removal of hardness, boiler feed water, boiler troubles and prevention, numerical based on hardness removal.Composite materials: Introduction, limitations of conventional engineering materials, role of matrix in composites, classification, matrix materials, reinforcements, metal-matrix composites, polymer-matrix composites, fiber-reinforced composites, environmental effects on composites, applications of composites.Speciality Polymers: Conducting polymers-Introduction, conduction mechanism, polyacetylene, polyparaphenylene and polypyrole, applications of conducting polymers, Ion-exchange resins and their applications.Ceramic & Refractory: Introduction, classification, properties, raw materials, manufacturing and applications.NOTE: Two hrs per week load for Applied Physics Department. Two hrs per week load for Applied Chemistry Department.

Text Books/Reference Books (PHYSICS):

1. “Solid State Physics”, 7th edition by Kittel; J. W .& Sons Publication.2. “Solid State Physics” by Wahab M.A.; Narosa Publishing House.3. “Solid State Physics” by Ali OmerM; Pearson Education (Singapore) pvt. Ltd. India branch,

New delhi.4. “Engineering Materials: Properties and Selection”, 7th edition by Kenneth G. Budinski,

Budinshi; Pearson Singapor (Prentice Hall). 5. “Solid State Physics” by Pillai S.O.; New Age International Publication.

Text Books/Reference Books (CHEMISTRY)

1. “Essentials of Material Science and Engineering “ by Donald R. Askeland, Pradeep P. Phule; Thomson.

2. “Speciality Polymers “ by R.W.Dyson,; USA: Chapman and Hall, New York.3. “Polymer Composites “ by A.P.Gupta, M.C.Gupta; New Age publication.4. “Engineering Chemistry “ by R.N.Goyal, H.Goel; Ane Books India.5. “Engineering Chemistry” by S.S.Dara; S.Chand.6. “Engineering Chemistry” by Raghupati Mukhopadhyay, Sriparna Datta; New Age International.7. “Engineering Chemistry” by P.C.Jain, Monica Jain; Dhanpat Rai.

Page 21: EP Syllabus

Course Curriculum B.TECH. I- Year, II- Semester Examination Theory Paper- V, (Common to all Branches)

EE/COE/EC/IC/ MPA/CE/ENE/PT/IT/BT ME/PEL T P Credits 4 0 0 4

ME 115 Basic Mechanical Engineering

(PART A)UNIT I: Introduction to Thermodynamics, Concepts of systems, control volume, state, properties, equilibrium, quasi-static process, reversible & irreversible process, cyclic process. Zeroeth Law and Temperature, Ideal Gas. Heat and Work.

UNIT II: First Law of Thermodynamics for closed & open systems. Non Flow Energy Equation. Steady State, Steady Flow Energy Equation. Second Law of Thermodynamics – Kelvin and Plank’s Statements, Clausius inequality, Definition of Head Engines, Heat pumps, Refrigerators. Concept of Energy and availability. Carnot Cycle; Carnot efficiency, Otto, Diedel, Dual cycle and their efficiencies.

UNIT III: Properties & Classification of Fluids, Ideal & real fluids, Newton’s law of viscosity, Pressure at a point, Pascal’s law, Pressurevariation in a static fluid, Introduction to Bio-fluid Mechanics General description of fluid motion, stream lines, continuity equation, Bernoulli’s equation, Steady and unsteady flow.Turbines and pumps.

(PART-B)

UNIT IV: Introduction to engineering materials for mechanical construction. Composition, mechanical and fabricating characteristics and applications of various types of cast irons, plain carbon and alloy steels, copper, aluminum and their alloys like duralumin, brasses and bronzes cutting tool materials, super alloys thermoplastics, thermosets and composite materials.

UNIT V: Introduction to Manufacturing processes for various machine elements. Introduction to Casting & Welding processes. Fabrication of large & small components and assemblies- example Nuts and Bolts, Water turbine rotors, Large Electric Generators, introduction to turning milling, shaping, drilling & boring processes.

UNIT VI: Introduction to quality measurement for manufacturing processes; standards of measurements, line standards and, end standards, precision measuring instruments and gauges: vernier calipers, height gauges, micrometers, comparators, dial indicators, and limit gauges.

Text Books/Reference Books

1. “Engineering Thermodynamics” by P. K. Nag.2. “Fundamentals of Classical Thermodynamics” by G. J. Van Wyle and R. E. Santag.3. “Introduction to Fluid Mechanics and Fluid Machines” by S. K. Som and G. Biswas.4. “Fluid Mechanics” by V. L. Streeter and E. B. Wylie. 5. “Fluid Mechanics and Hydraulic Machines” by R. K. Bansal.6. “Manufacturing Processes” by Kalpakjian.7. “Fluid Mechanics” by Modi and Seth.8. “Workshop Practics” by A. K. Hazara Chowdhary.9. “Workshop Technology” by W. A. J. Chapman.10. “Production Engineering” by P.C. Sharma.11. “Production Engineering” by R. K. Jain.

Page 22: EP Syllabus

Course CurriculumB.TECH. I- Year, II- Semester ExaminationTheory Paper- VI, (Common to all Branches)

EE/COE/EC/IC/ MPA/CE/ENE/PT/IT/BT ME/PE L T P Credits

2 0 0 2

COE– 116 Programming Fundamentals

UNIT I: Introduction: Concepts of algorithm, flow chart, Introduction to different Programming Languages like C, C++, Java etc. Elementary Programming: Data types, assignment statements, conditional statements and input/output statements. Iterative programs using loops.Concept of subprograms. Coding style: choice of names, indentation, documentation, etc. [8 hrs]

UNIT II:Arrays: Array representation, Operations on array elements, using arrays, multidimensional arrays. Structures& Unions: Declaration and usage of structures and Unions.Pointers: Pointer and address arithmetic, pointer operations and declarations, using pointers as function argument, File: Declaration of files, different types of files. File input/output and usage.   [8 hrs]

UNIT III: Object Oriented Programming: Functional and data decomposition, Characteristics of Object-Oriented Languages: Abstraction, Encapsulation, Information hiding, abstract data types, Classes and Objects: Concept of Object & classes, attributes, methods, C++ class declaration, private and public memberships, Constructors and destructors, instantiation of objects. Introduction to Class inheritance and operator overloading. [10 hrs]

UNIT IV:   Files: Streams and files, error handling, over view of Standard Template Library. [2 hrs]

Text Books/Reference Books

1. “Problem Solving and Program Design in C” by Jeri R. Hanly, Elliot B. Koffman; Pearson Addison-Wesley, 2006.

2. “A Structured Programming Approach Using C” by Behrouz A.Forouzan, Richard F. Gilberg; Thomson Computer Science- Third Edition [India Edition], 2007.

3. “C++: The Complete Reference” by Schildt Herbert; Wiley DreamTech, 2005.4. “Object Oriented Programming using C++” E. Balagurusamy, TMH. R. Lafore; BPB

Publications, 2004.5. “Object Oriented Programming with C++” by D . Parasons; BPB Publication, 1999.6. “The Art of Programming Computer Science with C++” Steven C. Lawlor; Vikas Publication,

2002.

Page 23: EP Syllabus

Course CurriculumB.TECH. I- Year, II- Semester Examination

Practical Paper- I, (Common to all Branches) EE/COE/EC/IC/ MPA/CE/ENE/PT/IT/BT ME/PE

L T P Credits 0 0 3 03

ME– 117 Engineering Graphics

General:Importance, Significance and scope of engineering drawing Lettering, Dimensioning, Scales,Sense of Proportioning, Different types of Projections, B.I.S. Specification, line symbols, rules of printing.

Projections of Points and Lines:Introduction of planes of projection, Reference and auxiliary planes, projections of points andlines in different quadrants, traces, inclinations, and true lengths of the lines, projections on auxiliary planes, shortest distance, intersecting and non-intersecting lines.

Planes Other than the Reference Planes:Introduction of other planes (perpendicular and oblique), their traces, inclinations etc.,projections of points lines in the planes, conversion of oblique plane into auxiliary plane and solution of related problems.

Projections of Plane Figures:Different cases of plane figure (of different shapes) making different angles with one or bothreference planes and lines lying in the plane figures making different given angles (with one or both reference planes). Obtaining true shape of the plane figure by projection.

Projection of Solids:Simple cases when solid is placed in different positions, Axis, faces and lines lying in the facesof the solid making given angles.

Isometric and Orthographic:First and Third angle of system of projection sketching of Orthographic views from pictorialviews and vice –versa principles and type of sectioning.

Development of Surface

Suggested Readings:

1. “Engineering Graphics” by Narayana, K.L. and Kannaiah, P.; Tata McGraw Hill, New Delhi

2. “Elementary Engineering Drawing” by Bhatt N.D.; Charotar Book Stall, Anand3. “Engineering Graphics” by Lakshminarayaan, V. and Vaish Wanar, R.S.; Jain Brothers, New

Delhi4. “Engineering Graphics” by Chandra, A.M. and Chandra Satish; Narosa

Page 24: EP Syllabus

I

Course CurriculumB.TECH.I year, II Semester Examination

Practical Paper II (Common to all Branches)EE/COE/EC/IC/ MPA/CE/ENE/PT/IT/BT ME/PE

COE 118 Programming Lab

Laboratory Practical Based on course work corresponding COE-116L T P Credits

0 0 2 02

Course CurriculumB.TECH.I year, II Semester Examination Practical

Paper III (Common to all Branches)EE/COE/EC/IC/ MPA/CE/ENE/PT/IT/BT ME/PE

EP 119 Applied Physics LabLaboratory Practical Based on course work corresponding EP-119

L T P Credits 0 0 2 02

Course CurriculumB.TECH.I year, II Semester Examination

Practical Paper IV (Common to all Branches)EE/COE/EC/IC/ MPA/CE/ENE/PT/IT/BT ME/PE

PE 120 Mechanical WorkshopL T P Credits0 0 3 03

Fitting shops: Introduction to various fitting tools- fabrication methods & job work assigned by workshop superintendent.

Welding shops: Introduction to welding shop-welding principles & classifications, arc welding processes & related tools/equipments.

Foundry Shops: Introduction to molding sands, molding tools-pattern making, miscellaneous work.

Page 25: EP Syllabus

I

Course CurriculumB.TECH. (EP) II-Year, III-Semester

Theory Paper IEP201 Introduction to computing

L T P Credits 3 1 0 04

UNIT I

Introduction to Matlab: Advantages and disadvantages, Matlab environment: Command window, Figure window, Edit window, Variables and Arrays: Initializing variables in Matlab, Multidimensional arrays, Subarrays.

UNIT II

Special values, Displaying output data, Data file, Scalar and array operations, Hierarchy of operations, Built-in-Matlab functions, Introduction to plotting: 2D and 3D plotting. Branching Statement and Program design: Introduction to top-Down design Technique, Use of pseudo code, Relational and logical operators, Branches, additional plotting features of Matlab

UNIT III

Loops: The while loop, for loop, details of loops operations, break and continue statement, nesting loops, Logical arrays and vectorization, User Defined Functions: Introduction to Matlab functions.

UNIT IV

Variable passing in Matlab, Optional arguments, Sharing data using global memory, preserving data between calls to a function, function functions, Subfunction and private function.

UNIT V

Complex Data and Character Data: Complex data, String functions, Multidimensional arrays, Additional 2D plots, three dimensional plots. Input/Output Function: Textread function, load and save commands.

UNIT VI

An introduction to Matlab file processing, file opening and closing, Binary I/O functions, Formatted I/O functions, comparing binary and formatted functions, file positioning and Status functions, Numerical methods and developing the skills of writing the program.

 Text Books/Reference Books

1. Stephen J. Chapman, MATLAB Programming for Engineers, CL-Engineering; 4 edition (November 8, 2007) 2. Rudra Pratap, Getting Started with MATLAB: A Quick Introduction for Scientists and Engineers, Oxford

University Press, USA (November 16, 2009)

3. Duane C. Hanselman, Mastering MATLAB 7, Prentice Hall; 1 edition (November 1, 2004)

4. Stormy Attaway, Matlab: A Practical Introduction to Programming and Problem Solving, Butterworth-Heinemann; 1 edition (February 16, 2009)

5. Amos Gilat, MATLAB: An Introduction with Applications, Wiley; 3 edition (January 2, 2008

Page 26: EP Syllabus

I

Theory Paper IIEP202 Mathematical Physics

L T P Credits 3 1 0 04

UNIT I:

Review of Vector Analysis: Scalar and vector fields, Differentiations, divergence and curl, Integrations, Applications of Greens, Gauss’s and stokes theorem, Equation of continuity and its applications.

UNIT II:

Tensors: Definition- Contravariant and Covariant tensors-Dummy suffix notation-Addition, substraction, Contraction, inner product, outer product, Quotient law, symmetric and anti-symmetric tensors-application of tensor theory to strain, thermal expansion, piezo-electricity and converse piezo-electric effect

UNIT III:

Complex Variables: Introduction, Functions of complex variables, limit, continuity, Analytic function, Cauchy-Reimann equations, Harmonic function, Singular points and classification, Cauchy theorem, Cauchy’s integral formula, Taylor’s and Laurent’s series, Residues, Calculations of residues, Residue theorem-evaluation of definite integrals.

UNIT IV:

Partial Differentiatial Equations: Laplace equation – Method of separation of variables- Solution of Laplace Equation in two dimensions- Application of Laplace equation to two dimensional steady state of heat flow in a thin rectangular plate- D’alemberts solution of vibrating string-application to the vibration of a rectangular membrane.

UNIT V:

Numerical analysis: Introduction to Numerical analysis, Forward and backward differences, Relation between the operators, Concept of Interpolation and Extrapolation

UNIT VI:

Numerical analysis: Newton-Gregory formula for forward and backward interpolation, Solution of ordinary differential equations of first order using Runge-Kutta Method

Text Books/Reference Books

1. M. R. Spiegel, Vector Analysis, Schaum’s outline series Tata McGraw Hill

2. Harry Lass, Vector and Tensor analysis, International Student edition, McGraw-Hill

3. I.S. Sokolnikof, Tensor Analysis, John Wiley & Sons, Inc.

4. Physical properties of crystals, J.F. Nye, Schaum’s outline series, Oxford University Press

5. M. J. Ablowitz, A.S. Fokas, Complex variables, Cambridge University Press, First South Asian paperback edition.

6. J.W. Brown and R.V. Churchill, Complex variable and applications, 6th ed., McGraw Hill International

7. Erwin Kreyszig, Advanced Engineering Mathematics, New Age International (p) Limited.

Page 27: EP Syllabus

I

Theory Paper IIIEP 203 Thermal Physics

L T P Credits 3 1 0 04

UNIT IThermal equilibrium, zeroth law and concepts of temperature. First law and its consequences, reversible, irreversible and quasi-static processes. Path Dependence and Heat capacities,

UNIT IICalculations of Work and heat; Isothermal, adiabatic, Isobaric, Isochoric, Enthalpy. Second law: heat engines, basic inequality, Extension to Non-Isolated systems, Carnot’s cycle, concept of entropy and its statistical interpretation, thermodynamic potentials, Maxwell's relations.

UNIT IIIGibbs free energy, Helmholtz free energy.Chemical equilibrium, stability, elements of chemical thermodynamics. Thermodynamic functions, Clausius-Clapeyron equation..

UNIT IV Maxwell-Boltzmann’s molecular speed distribution and heat capacities, Canonical

ensemble: Boltzmann’s factor, partition function

UNIT VPhase transition: Joule Kelvin effect, first order and continuous transitions, critical

exponents, applications to magnetism, super fluidity and superconductivity

UNIT VIChemical potentials; grand canonical ensembles; gas-liquid phase transition, photon gas: Black body radiation.

Text Books/Reference Books

1. M.W. Zemansky and R. H. Dittman, Heat and Thermodynamics (7th ed.), McGraw Hill

2. H. B. Callen, Thermodynamics and an Introduction to Thermostatistics (2nd ed.), John Wiley

3. ter Haar and H. Wergeland, Elements of Thermodynamics, Addison- Wesley 4. H. E. Stanley, Phase Transition and Critical Phenomenon, Cambridge

University Press

Page 28: EP Syllabus

I

Theory Paper IVEP-204: Digital Electronics

L T P Credits 3 1 0 04

UNIT IMinimization Techniques: Boolean postulates and laws – De-Morgan’s Theorem-Principle of Duality - Boolean expression - Minimization of Boolean expressions –– Minterm – Maxterm - Sum of Products (SOP) – Product of Sums (POS) – Karnaugh map Minimization – Don’t care conditions, Implementation of Logic Functions using gates, NAND–NAND and NOR-NOR implementations. BCD and XS3 Addition, Gray Codes, 1’s complement and 2’s complement subtraction.

UNIT IIIntroduction to the circuits for Arithmetic UNIT: Design procedure – Half adder – Full Adder – Half subtractor – Full subtractor - Parallel binary Adder/Subtractor –Serial Adder/Subtractor - BCD adder – 2’s complement adder/subtractor, Multiplexer, Demultiplexer, Decoder, Encoder, Latches, Flip-flops - SR, JK, D, T, and Master-Slave – Characteristic table and equation –– Edge triggering – Level Triggering – Realization of one flip flop using other flip flops. Registers – shift registers - Bidirectional shift registers, serial and parallel configurations.

UNIT IIIShift register counters – Ring counter, Johnson counter, Asynchronous Ripple or serial counter –Asynchronous Up/Down counter - Synchronous counters – Synchronous Up/Down counters – Programmable counters –

U N I T I VDesign of Synchronous counters: state diagram- State table –State minimization –State assignment - Excitation table and Circuit implementation - Modulo–n counter,– Non-Sequential Counter Design using JK, D and T-design. Introduction to VHDL-Behavioural Modeling, Dataflow Modeling, Structural Modeling, Application in Digital System Designs.U N I T V

Digital to analog converter: Binary Weighted Resistors, Analog to digital converter-Successive Approximation Method, Logic gates, DTL, TTL, ECL, I2L, CMOS Gates and their parameters and comparisons.

U N I T V IClassification of memories – ROM - ROM organization - PROM – EPROM – EEPROM – EAPROM, RAM – RAM organization – Write operation – Read operation, memory expansion – Static RAM Cell-Bipolar RAM cell – MOSFET RAM cell – Dynamic RAM cell

Text Books/Reference Books1. Thomas L. Floyd , Digital Fundamentals, Pearson Education Asia (1994)2. Digital Integrated Electronics by H.Taub & D. Schilling(TMH).3. Digital Principles and Application by Malvino & Leach (TMH).4. Digital Electronics And Logic Design by M.Mano (EPI)5. Switching And Finite Automata Theory by Z. Kohavi (TMH).6. Modern Digital Electronics by R. P. Jain (TMH).

Page 29: EP Syllabus

I

Theory Paper V

EP 205 : Engineering MechanicsL T P Credits

3 1 0 04

UNIT IRigid body static: Equivalent force system. Equations of equilibrium, Free body diagram, Reaction, Static indeterminacy and partial constraints, Two and three force systems.

UNIT IIStructures: 2D truss, Method of joints, Method of section. Frame, Beam, types of loading and supports, Shear Force and Bending Moment diagram, relation among load-shear force-bending moment.

UNIT IIIFriction: Dry friction (static and kinematics), wedge friction, disk friction (thrust bearing), belt friction, square threaded screw, journal bearings (Axle friction), Wheel friction, Rolling resistance.

UNIT IVCenter of Gravity and Moment of Inertia: First and second moment of area and mass, radius of gyration, parallel axis theorem, product of inertia, rotation of axes and principal M. I., Thin plates, M.I. by direct method (integration), composite bodies.Virtual work and Energy method: Virtual Displacement, principle of virtual work, mechanical efficiency, work of a force/couple (springs etc.), Potential Energy and equilibrium, stability.

UNIT VKinematics of Particles: Rectilinear motion, curvilinear motion rectangular, normal tangential, polar, cylindrical, spherical (coordinates), relative and constrained motion, space curvilinear motion.

UNIT VIKinetics of Rigid Bodies: Translation, fixed axis rotation, general planner motion, work-energy, power, potential energy, impulse-momentum and associated conservation principles, euler equations of motion and its application.

Text Books/Reference Books1. I. H. Shames, Engineering Mechanics: Statics and dynamics, 4th Ed, EPI, 2002. 2. P. Beer and E. R. Johnston, Vector Mechanics for Engineers, Vol I - Statics, Vol II

3. Dynamics, 3rd Ed, Tata McGraw Hill, 2000.

4. R. C. Hibbler, Engineering Mechanics, Vol I and II, Pearson Press, 2002.

5. Andy ruina and Rudra Pratap, Introduction to Statics and Dynamics

Page 30: EP Syllabus

I

Theory Paper VI

EP 206 : Basic Engineering EconomicsL T P Credits

3 0 0 03

Syllabus shall be provided by Humanities Department

Page 31: EP Syllabus

I

B.TECH. (EP) II-Year, III-Semester Practical Papers

EP 207: Thermal Physics Lab

L T P 0 0 2

Laboratory experiments will be set in consonance with the material covered in introduction to thermal physics course

EP 208: Digital Electronics Lab

L T P 0 0 2

Laboratory experiments will be set in consonance with the material covered in digital electronics course

EP 209: Computing Lab

L T P 0 0 2

Laboratory experiments will be set in consonance with the material covered in introduction to computing course

EP 210 Self Study/cum Seminar

L T P 0 1 0

Page 32: EP Syllabus

I

Course CurriculumB.TECH. (EP) II-Year, IV-Semester

Theory Paper I

EP 211 Classical Mechanics and Quantum Mechanics

L T P Credits 3 1 0 4

Classical Mechanics

UNIT I

Basic Principles of classical dynamics: Central forces: Definition and properties, The equations

of motion, the equivalent one dimensional problem and classification of orbits.

UNIT IIConstraints of motion : Generalised coordinates : Hamilton’s variational principle: D’Almbert Principle : The Lagrangian function,Lagrange’s equations of motion: derivation and applications , Conservation theorems

UNIT IIIThe Hamiltonian (H), Hamilton’s Canonical equations of motion, Physical Significance of H, Cyclic coordinates Derivation of Hamilton’s equations from a variational principle, Applications of Hamilton’s equations of motion

Quantum MechanicsUNIT IVReview of Schrödinger equation. Simple potential problems- peneteration of a potential barrier, Bra and ket notations, Angular momentum algebraUNIT VApproximation techniques in quantum mechanics : Variational Method, Applications of variation method – (i) Ground state of hydrogen atom and (ii) helium atom.UNIT VIWentzel Kramers Brillouin (WKB) approximation, Principle of WKB approximation, connection formulae for penetration of barrier.Application of WKB Approximation method – (i) Transmission through a barrier (ii) Theory of alpha decay.Time dependent perturbation theory, perturbation theory for non degenerate case, stark effect of the plane rotator

Text Books/Reference Books1. H. Goldstein, Classical Mechanics, Addison Wesley, 2nd ed. 2. S. Gasiorowicz, Quantum Physics, John Wiley , Asia3. P.W. Mathews and K. Venkatesan, A textbook of Quantum Mechanics, Tata

McGraw Hill4. Schwabl, Quantum Mechanics, Narosa5. L.I. Schiff, Quantum Mechanics, McGraw Hill6. Merzbacher, Quantum Mechanics,John Wiley , Asia

Page 33: EP Syllabus

I

7. B.H. bransden and C. J. joachain,Introduction to Quantum Mechanics, LongmanTheory Paper II

EP 212 OpticsL T P Credits

3 1 0 04UNIT I

Wave nature of light, Coherence: Spatial and temporal coherence, spectral resolution of a finite wave train, Optical Beats, Coherence time and line width via fourier analysis, Fourier transform spectroscopy.

UNIT II

Theory of interference and interferometers: Interference of two monochromatic waves, two beam interference, multiple beam interference, fabry perot interferometer, chromatic resolving power, Channeled spectra

UNIT III

Theory of diffraction: Introduction, The Huygens –Fresnel principle, Kirchhoff’s diffraction theory, the integral theorem of Kirchhoff, Fraunhofer and Fresnel diffraction.

UNIT IV

Spatial frequency filtering, resolving power of prism and grating, diffraction patterns with sound and microwaves.

UNIT V

Optics of crystals: the dielectric tensor of an anisotropic medium, the structure of a monochromatic plane wave in an anisotropic medium, Optical properties of uniaxial and biaxial crystals.

UNIT VI

Measurements in crystal optics, Stress birefringence and form birefringence, Absorbing crystals, Introduction to Lasers

Text Books/Reference Books

1. G. B. Fowles, Introduction to Modern Optics, Holt Reinhart and Winston2. A.Ghatak, Introduction to Optics, Tata McGraw Hill.3. M. Born and E. Wolf, Principles of Optics, McMillan 4. S. C. Lipson and H. Lipson, Optical Physics, Cambridge University Press

Page 34: EP Syllabus

I

Theory Paper IIIEP 213 Signals and Systems

L T P Credits 3 1 0 04

UNIT IBasic signal in continuous and discrete form, linearity, causality, stability, linear time-invariant (LTI) systems, convolution integral for continuous-time systems, convolution sum for discrete time systems, properties of linear time-invariant systems, system described by differential and difference equations.

UNIT IIFourier series representation of periodic signals: Representation of periodic signalsby trigonometric and exponential series, properties of continuous time Fourier series, discrete time Fourier series and its properties, continuous and discrete time filtering.

UNIT III Continuous time Fourier transform: Definition of Fourier transform and its inverse, properties of the transform, common transform pairs, convolution and multiplication theorems.

Discrete time Fourier transform: Definition and properties, Convolution theorem, frequency response corresponding to difference equations.

UNIT IV Laplace Transform: Definition, region of convergence, properties, analysis of LTI systems, solution of

differential equations, system functions, poles and zeros, stability.

UNIT VZ Transform: definition, region of convergence, inversion, basic properties, solution of difference equations, system functions, poles and zeros and stability.

UNIT VIDiscrete Fourier transform: Properties of discrete Fourier transform, relation between discrete Fourier transform, Z and Laplace transform. Convolution of sequences, circular convolution theorem, overlap add and overlap save methods of convolution.

Sampling: Uniform sampling, sampling theorem, aliasing, decimation, interpolation.

Text Books/Reference Books

1. “Signals & Systems” by Oppenheim, Willsky and Nawab.2. “Signal & systems” by Simon Haykins; PHI3. “Fundamentals of Signal & Systems using the Web and Matlab”, By Kamen : Pearson4. “Digital Signal Processing”, by Proakis : Pearson.

Page 35: EP Syllabus

I

Theory Paper IVEP-214- Microprocessors and Interfacing

L T P Credit

3 0 0 03

UNIT I : Basic Concepts of Microprocessors, Introduction to 8086 Microprocessor, its internal architecture, Concept of address, data and control buses, 8086 hardware specifications: pin-outs and the pin-functions, Real Mode Memory Addressing, Introduction to protected mode memory addressing, Memory Address Space Organization, Minimum and Maximum mode.

UNIT II : Programming model of 8086-general purpose registers, special purpose registers and segment registers. Physical address generation, data addressing modes, program memory addressing modes, stack memory addressing modes, data transfer instructions, arithmetic and logic instructions, flag control instructions, program control instructions, Input/Output instructions, Bus Cycle Timing Diagrams.

UNIT III : Types of Interrupts, interrupt instructions, hardware interrupt interface, software interrupts, NMI interrupt.

UNIT IVProgrammable Interrupt Controller – 8259, Programmable Peripheral Interface (PPI) - 8255, Programmable Direct Memory Access (DMA) Controller - 8237/8257, Programmable Interval Timer - 8253.

UNIT V : Introduction to PIC Microcontrollers, PIC microcontroller overview and features, PIC 16F877: ALU, CPU registers, pin diagram, PIC reset actions, PIC oscillator connections, PIC memory organization, PIC 16F877 instructions, Addressing modes, I/O ports.

UNIT VIInterfacing applications of Microcontroller-interfacing of 7 segment display, LCD interfacing, ADC and DAC interfacing.

Texts/References :1. Y. Liu and G. A. Gibson, Microcomputer Systems: The 8086/8088 Family, 2nd Ed., Prentice Hall of India.2. Douglas Hall, Microprocessors Interfacing, Tata McGraw Hill.3. Barry B. Brey, The Intel Microprocessors, 7th Ed., Prentice Hall of India.4. Walter A. Treibel and Avtar Singh, The 8088 and 8086 Microprocessors, Prentice Hall of India.5. Rafiquzzaman, Microprocessors, Prentice Hall of India.6. A.K.Ray, K.M.Bhurchandi, Advanced Microprocessors and Peripherals (Second edition), TMH.7. Microcontroller and Embedded systems- M.A.Mazadi, J.G.Mazadi & R.D.McKinlay - Pearson

Page 36: EP Syllabus

I

PHI.8. Embedded Design with Microcontrollers by Martin Bate

Theory Paper VEP 215 Computational Methods

L T P Credits 3 1 0 04

UNIT IErrors in numerical calculations: Introduction, Number and their accuracy, Errors and their analysis, Absolute, Relative, Percentage and Maximum probable error, Physical significance of errors, General error formula, Error in series approximation, Interpolation: Introduction, Errors in polynomial Interpolation, Finite differences, Detection of errors by use of difference tables, Differences of a polynomial, Newton’s formulae for interpolation, Central difference interpolation formulae, Practical interpolation, Divided differences and their property, Inverse interpolation, Double Interpolation. UNIT IISolution of numerical algebraic and transcendental equation: Roots of equations, Direct method and iteration method, Bisection method, Regula Falsi Method or Method of False position, Secant or Chord method, Newton-Raphson method, Solution of simultaneous linear algebraic equation: Gauss-elimination method, Gauss-Jordon elimination method, Power method, Jacobi method for finding eigen values, Rotation Matrix, Method of triangularization, Relaxation Method UNIT IIICurve fitting: Introduction, Least square curve fitting procedures, fitting a straight line, nonlinear curve fitting, curve fitting by a sum of exponentials, Data fitting with cubic splines, governing equations and end condition, errors in the cubic Spline derivatives, error analysis of the cubic Spline, Approximation of function, Chebyshev polynomials, Economization of power series UNIT IVNumerical Differentiation and Integration: Cubic Spline method, maximum and minimum values of a tabulated data, Numerical integration, trapezoidal method, Simpson’s 1/3-rule, Simpson’s 3/8-rule, Boole’s and Weddle’s Rule, Romberg integration, Newton-cotes integration formulae, Euler-Maclaurin formula, Gaussian integration, Numerical double integration UNIT VNumerical solution of ordinary differential equations: Introduction, solution by Taylor’s series, Picard’s method of successive approximation methods, Euler’s method, modified Euler’s method, Runge-Kutta method, predictor-corrector method, Cubic Spline method, Boundary value problem.UNIT VINumerical solution of partial differential equation: Introduction, Finite difference approximations to derivatives, Laplace’s equation, Jacobi’s method, Iterative method for solution of equation.

Text Books/Reference Books

1. Steven C. Chapra and Raymond P Canale, Numerical Methods for Engineers, McGraw New York

2. T.R. McCalla, Introduction to Numerical Methods and Fortran Programming, John Wiley, N.Y.

Page 37: EP Syllabus

I

3. William Press et al, Numerical Recipes in Fortran/C, Cambridge University Press4. Tao Pang, An Introduction to Computational Physics, Cambridge University Press5. S.E. Koonin, Computational Physics, Benjamin

Theory Paper VIEP 216 Condensed Matter Physics

L T P Credits 3 1 0 04

UNIT IIntroduction to crystal physics, Symmetry operations; Bravais lattices; Point and Space groups; Miller indices and reciprocal lattice; Brillouin zones; Defects in crystals; Point and line defects. Interplanar spacing, Ionic bonding, Bond dissociation energy, Calculation of lattice energy of ionic crystals, Madelung constant of ionic crystals, Covalent, Metallic and Intermolecular bonds; X-ray diffraction; UNIT IILattice vibration and thermal properties: Einstein and Debye models; continuous solid; linear lattice; acoustic and optical modes; dispersion relation; attenuation; density of states; phonons and quantization; thermal conductivity of metals and insulators.

UNIT III Free electron theory of metals; Electronic motion in a one and three dimensional potential well; Fermi energy, total energy, Density of states, Wave equation in a periodic potential and Bloch theorem; Kronig-Penny model; band theory; Distinction between metal, semiconductor and insulators; band gap.

UNIT IV Dielectrics: Polarization mechanism and types, dielectric constant, Polarizability, Clausius Mossoti equation, Behaviour of polarization under impulse, Dielectric loss, ferroelectric and piezoelectric materials, application of dielectric materials. UNIT Vagnetism: concept of magnetism, classification of dia-, para-, ferro-, antiferro magnetism and ferrimagnetism (Ferrites), Hysteresis, Hard and Soft magnetic materials, magnetic storage and surfaces, Application of magnetic materials, GMR.

UNIT VISuperconductivity: Introduction and historical developments; Meissner effect and its contradiction to the Maxwell’s equation; Critical parameters; Thermal properties, energy gap, Isotope effect, London equations, Penetration depth, Coherence length; BCS theory; Cooper pair, ground state, Josephson effect and tunnelling, Applications of superconductors.

Text Books/Reference Books

1. H. P. Myers, Introduction to Solid State Physics, Viva books (1998). 2. M. A. Omar, Elementary Solid State Physics, Addison-Wesley (1975). 3. C. Kittel, Introduction to Solid State Physics, John Wiley (1996). 4. A. J. Dekker, Solid State Physics, Macmillan (1986).

Page 38: EP Syllabus

I

5. N. W. Ashcroft and N. D. Mermin, Solid State Physics, HBC Publ. (1976).6. S. O. Pillai, Soild State Physics, New Age International publication.

B.TECH. (EP) II-Year, IV-Semester Practical Papers

EP 217 Optics Lab

L T P 0 0 2

Laboratory experiments will be set in consonance with the material covered in optics course

EP 218 Microprocessor & Interfacing Lab

L T P 0 0 2

Laboratory experiments will be set in consonance with the material covered in microprocessor course

EP 219 Solid State Physics Lab

L T P 0 0 1

Laboratory experiments will be set in consonance with the material covered in optics course

EP 220 Self Study/cum Seminar

L T P 0 1 0

Page 39: EP Syllabus

I

Course CurriculumB.TECH. (EP) III-Year, V-Semester

Theory Paper IEP301 Atomic and Molecular Physics

L T P Credits 3 1 0 04

UNIT – I

Bohr-Sommerfeld theory of Hydrogen Atom, Quantum mechanics of Hydrogen atom: Angular momentum & parity, Magnetic dipole moments, Electron spin and vector atom model, Spin orbit Interaction: Hydrogen fine structure, identical particles & Pauli’s principle.

UNIT – II

Helium Atom & its spectrum, Multielectron atoms; Hartree’s field: Atomic ground states & periodic table, Spectroscopic terms: L-S & j-j couplings, spectra of alkali elements, spectra of alkaline earth elements, The Zeeman effect, The stark effect, Hyperfine structure of spectral lines, The Breadth of Spectral lines, X-ray spectra.

UNIT – III

Rotational spectroscopy:Rigid rotor, Rotational spectra of diatomic Molecules, Rotation levels of polyatomic molecules: spherical, symmetric, and asymmetric tops. Angular momentum couplings – Hund’s cases

UNIT – IV

Vibrational spectroscopy: Vibration of diatomic molecules. Harmonic and anharmonic oscillator, Vibrational-rotational couplings,Vibration of polyatomic molecules, Solvent effects on vibration spectra.

UNIT – V

Electronic spectroscopy of molecules: Electronic absorption specta of diatomic molecules. Molecular orbital and term, symbols, Dissociation and pre-dissociation in the spectra of diatomics.

UNIT – VI

Electronic absorption spectra of polyatomic molecules, fluorescence. Raman spectroscopy. Solvent effects.

Text Books/Reference Books

1. Molecular Spectra and Molecular Structure by G. Herzberg

2. B. H. Bransden and C. J. Joachain, Physics of Atoms and Molecules, Pearson Education

3. H. Haken and H. C. Wolf, The Physics of Atoms and Quanta, Springer

4. E. U. Condon and G. H. Shortley, The Theory of Atomic Spectra, Cambridge

5. J. M. Blatt and V. F. Weisskopf, Theoretical Nuclear Physics, John Wiley

Page 40: EP Syllabus

I

6. H. E. White, Introduction to Atomic Spectra, McGraw-Hill

Theory Paper IIEP 302 Communication Systems

L T P Credits 3 1 0 04

UNIT I

Introduction: Block diagram of an electronic communication system, electromagnetic spectrum-band designations and applications, need for modulation.Concept of Noise: External noise, internal noise, signal to noise ratio, noise factor, noise temperature, Friss formula.

UNIT II

Amplitude modulation: modulation index, frequency spectrum, generation of AM (balanced modulator), Amplitude Demodulation (diode detector), Other forms of AM: Double side band suppressed carrier, DSBSC generation (balanced modulator), Single side band suppressed carrier, SSBSC generation (filter method), SSB detection, Introduction to other forms of AM (Pilot Carrier Modulation, Vestigial Side Band modulation).

UNIT III

Angle modulation: Frequency and Phase modulation, modulation index and frequency spectrum, equivalence between FM and PM, Generation of FM (direct methods), FM detector (slope detector, PLL). .

UNIT IV

Pulse Analog Modulation: Sampling theorem, Errors in Sampling. Pulse Amplitude Modulation (PAM), Time Division Multiplexing (TDM). Pulse Width Modulation (PWM) and Pulse Position Modulation (PPM). Generation and detection of PAM, PWM, PPM.

UNIT V

Pulse Code Modulation: Need for digital transmission, Quantizing, Uniform and Non-uniform Quantization, Quantization Noise, Companding, Coding, Decoding, Regeneration, Transmission noise and Bit Error Rate. Differential Pulse Code Modulation, Delta Modulation, Adaptive Delta Modulation.

UNIT VI

Digital Carrier Modulation Techniques: Information capacity, Bit Rate, Baud Rate and M-ary coding. Amplitude Shift Keying (ASK), Frequency Shift Keying (FSK), Phase Shift Keying (PSK), Binary Phase Shift Keying (BPSK) and Quadrature Phase Shift Keying (QPSK). QPSK, Amplitude modulation, bandwidth efficiency, carrier recovery – squaring loop, Costas loop, DPSK.

Text Books/Reference Books

1. Electronic Communications: Modulation and Transmission by Robert J. Schoenbeck, Prentice Hall of India

2. Electronic Communications by D.Roddy and J.Coolen, Pearson Education3. Electronic Communications by Kennedy, Pearson Education4. Digital and Analog Communication Systems by L.W.Couch, Pearson Education5. Communication Systems by Haykins, Prentice Hall of India

Page 41: EP Syllabus

I

Theory Paper IIIEP 303: Electromagnetic theory, Antennas and Propagation

L T P Credits 3 1 0 04

UNIT I

Transmission lines: transmission line equation in time and frequency domain, losses and dispersion, reflection from an unknown load; quarter wavelength, single stub and double stub matching; Smith Chart and its applications. distortion – distortion less transmission line – The telephone cable – Inductance loading of telephone cables.Input impedance of lossless lines – reflection on a line not terminated by Zo - Transfer impedance – reflection factor and reflection loss.

UNIT II

Maxwell’s equations, constitutive relations, wave equation, plane wave functions, rectangular waveguide, circular waveguide, dielectric slab waveguide, surface guided waves. Characteristics of TM and TE Modes, Impossibility of TEM waves in waveguides, Wave impedances, characteristic impedance, Excitation of modes, Cutoff wavelength and phase velocity.

UNIT III:

Introduction to Antennas, Antenna parameters: Radiation intensity. Directive gain. Directivity. Power gain. Beam Width. Band Width. Gain and radiation resistance of current element, radiation from simple dipole and aperture, horn antenna, microstrip antenna, parabolic disc antenna.

UNIT IV

Concept of antenna arrays, end fire and broadside arrays, Expression for electric field from two and three element arrays. Uniform linear array. Method of pattern multiplication. Binomial array. Use of method of images for antennas above ground.

UNIT V

Basic types of propagation; ground wave, space wave and sky wave propagation.Sky wave propagation: Structure of the ionosphere. Effective dielectric constant of ionized region. Mechanism of refraction. Refractive index. Critical frequency. Skip distance. Maximum usable frequency. Fading and Diversity reception.

UNIT VI

Space wave propagation: Reflection from ground for vertically and horizontally polarized waves. Reflection characteristics of earth. Resultant of direct and reflected ray at the receiver. Duct propagation. Ground wave propagation: Attenuation characteristics for ground wave propagation. Calculation of field strength at a distance.

Text Books/Reference Books1. Advanced Engineering and Electromagnetics By C.A.Balanis.2. Antennas and Wave Propagation by J.D.Kraus, R.J.Marhefka and A.S.Khan3. Electromagnetics for Engineers by S.E.Schwarz4. Introduction to Electrodynamics by David J.Griffiths5. Electromagnetic Waves and Radiating Systems by E.C. Jordan & K.G. Balmain

Page 42: EP Syllabus

I

Theory Paper IVEP 304 Semiconductor Devices

L T P Credits 3 1 0 04

UNIT IIntroduction to the Quantum theory of solids: Allowed and forbidden Energy bands, Electrical conduction in solids, density of state function, Semiconductor in Equilibrium: Equilibrium carrier concentration, Intrinsic semiconductor, Extrinsic semiconductor, Position of Fermi energy level.

UNIT IICarrier transport phenomenon: Random motion, Drift and diffusion, Graded Impurity distribution, Excess carriers: Injection level, Lifetime, Direct and indirect semiconductors, P-N Junction: Device structure and fabrication, Equilibrium picture, DC forward and reverse characteristics, Small-signal equivalent circuit, Generation – Recombination currents, Junction Breakdown, Tunnel diode

UNIT IIIBipolar Junction Transistor: History, Device structures and fabrication, Transistor action and amplification, low frequency, common- base current gain, Small-signal Equivalent circuit.

UNIT IVEbers-Moll model MOS Junction: C-V characteristics, threshold voltage, body effect Metal Oxide Field Effect Transistor: History, Device structures and fabrication, Common source DC characteristics

UNIT VSmall-signal equivalent circuit, Differences between a MOSFET and a BJT Junction FET and MESFET: Basic pn JEFT & MESFET operation, Device characteristics.

UNIT VI Recent Developments: Hetero-junction FET, Hetro-junction bipolar transistor Optical Devices: Solar Cells, Photodectectors, LEDs

Text Books/Reference Books 1. Physics of Semiconductor Devices by Ben G. Streetman2. Physics of Semiconductor Devices by M.Shur3. Semiconductor Devices by Kittel4. Integrated Electronics by Millman and Helkias

Page 43: EP Syllabus

I

Theory Paper V EP 305 Biophysics

L T P Credits 3 1 0 04

UNIT I

Background of membrane biophysics, Basic structure and composition of membrane, Donnan equilibrium, GHK, Ion transport system overview.

UNIT II

Whole cell behavior: cardiac, Integration: from channels to whole cell, Whole cell behavior: currents, gating, kinetics, control, Measurement approaches, Automaticity and pacemakers, Excitation-contraction coupling (cardiac and neuro), Cardiac EC coupling, structure and function, NMJ

UNIT III

Ion channel structure and gating function, Common elements organized to make specific function, Protein structure, pore formation, charge field, Control of channel function, voltage activation, ligand activation, signaling, gating kinetics.

UNIT IV

Ion selectivity, Ion channel types and characterization, Channel types, structure, function, Same channels in different cell types, Molecular biology in ion channels, Sample channelopathies

UNIT V

Modeling and simulation of channels, Stochastic processes, State transition mechanics and modeling, Examples of disease modeling, Whole cell behavior: neuron, Integration, Propagation, saltatory conduction, Neuron synapse, synaptic plasticity, Structure of the synapse, Electrochemical transduction, Postsynaptic integration and information processing.

UNIT VI

Modeling and simulation of whole cell EP, Review of HH formalism; modern extensions, Mathematical formulation, numerical implementation, examples of software, Strengths and limitations of simulation, Cardiac cell-to-cell communication, Gap junction structure, function

Text Books/Reference Books 1. Biophysics: An Introduction by Roland Glaser2. Molecular and Cellular Biophysics by Meyer B. Jackson3. Introductory Biophysics: Perspectives on the Living State by J.R. Claycomb and Jonathan Quoc P.

Tran

Page 44: EP Syllabus

I

4. Quantitative Understanding of Biosystems: An Introduction to Biophysics by Thomas M. Nordlund

B.TECH. (EP) III-Year, V-Semester Practical PapersEP 306 Advanced Physics Lab

L T P 0 0 2

Laboratory experiments will be set in consonance with the material covered in theory courses 1 and 4.

EP 307 Electromagnetic theory, Antenna and Propagation Lab

Laboratory experiments will be set in consonance with the material covered in Electromagnetic Antennas and Propagation course

L T P 0 0 2

EP 308 Communication Systems Lab

L T P 0 0 2Laboratory experiments will be set in consonance with the material covered in communication systems course

EP 309 Minor Project -I

L T P 0 0 4

Page 45: EP Syllabus

I

Course CurriculumB.TECH. (EP) III-Year, VI-Semester

Theory Paper IEP 311 Instrumentation and Control

L T P Credits 3 1 0 04

UNIT-IInstrumentation: Transducers, classification & selection of transducers, strain gauges, inductive & capacitive transducers, piezoelectric and Hall-effect transducers, thermisters, thermocouples, photo-diodes & photo-transistors, encoder type digital transducers, signal conditioning and telemetry, basic concepts of smart sensors and application.

UNIT II Control System:Linear, Non Linear, Time Varying and Linear Time Invariant System, Servomechanism, Historical Development of Automatic Control and Introduction to Digital Computer Control, Mathematical Models of Physical Systems, Differential Equations of Physical Systems, Transfer Functions, Block Diagram Algebra and Signal Flow Graphs.

UNIT IIIFeedback and Non-feedback Systems Reduction of Parameter Variations By Use of Feedback Control Over System Dynamics By Use of Feedback Control of Effects of Disturbance Single By Use of Feedback and Regenerative Feedback.

UNIT IVTime and frequency response Analysis: Standard test signals, Time response of First order Systems, Time Response of Second-Order Systems, Steady-State Error and Error Constants, Effect of Adding a Zero to a System, P, PI and PID Control Action and Their Effect.

UNIT VDesign Specifications of Second-Order Systems and Performance Indices.Correlation Between Time and Frequency Response, Polar Plots, Bode Plots, and All Pass and Minimum-Phase Systems.

UNIT VThe Concept of Stability, Necessary Conditions for Stability, Hurwitz Stability Criterion, Routh Stability Criterion and relative Stability Analysis. The Root Locus Concept, Construction of Root Loci, Root Contours.

UNIT VISystems with Transportation Lag, Sensitivity of the Roots of the Characteristic equation, Mathematical Preliminaries, Nyquist Stability Criterion, Definition of Gain Margin and Phase Margin, Assessment of Relative Stability Using Nyquist Criterion and Closed-Loop Frequency Response.

Text Books/Reference Books 1. Modern Electronic Instrumentation and Measurement Techniques by Helfrick and Cooper; Prentice- Hall of India, Reprint1988.2. Electrical Measurement and Measuring Instruments by Golding, E.W., 3rd Edition; Sir Issac Pitman and

Page 46: EP Syllabus

I

Sons, 1960.3. Control Systems Engineering by Nagrath & Gopal; New Age International. Publishers

4. Instrumentation Measurement and Feedback” by Jones, B.TECH.; Tata McGraw-Hill, 1986. 5. Modern Control Engineering by Ogata 6. Linear Control Systems by Scheultz & Melsa.

Theory Paper II

EP 312 Fiber optics and optical communication

L T P Credits 3 1 0 04

UNIT IIntroduction to vector nature of light, propagation of light, propagation of light in a cylindrical dielectric rod, Ray model, wave model. Different types of optical fibers, Modal analysis of a step index fiber..

UNIT IISignal degradation on optical fiber due to dispersion and attenuation, Pulse dispersion in graded index optical fibers, Material dispersion.

UNIT IIIPropagation characteristics of step index fiber, Propagation characteristics of graded index fibers, Waveguide dispersion and design considerations

UNIT IVFabrication of fibers and measurement techniques like OTDR. Optical sources - LEDs and Lasers, Photo-detectors - pin-detectors, detector responsivity, noise, optical receivers.

UNIT VOptical link design - Power and Rise time Budget, BER calculation, quantum limit, power penalties. Optical switches - coupled mode analysis of directional couplers, electro-optic switches.

UNIT VIOptical fiber amplifiers – EDFA: Gain spectrum and gain band width, EDFAs for WDM transmission. Measurement methods in optical fibers

Text Books/Reference Books1. “Fibre Optic communication”, 2nd Edition, 1992 by J.Keiser; McGraw-Hill.2. “Optical communication systems” by J.Gowar; Prentice Hall India, 1987.3. “Integrated optics” by T. Tamir, (Topics in Applied Physics Vol.7); Springer-Verlag, 4. 1975. 5. “Optical fibers for transmission” by J.E. Midwinter; John Wiley, 1979. 6. “Optical fibres telecommunications” by S.E. Miller and A.G. Chynoweth, eds.; Academic 7. Press, 1979. 8. “Nonlinear fibre optics” by G.Agrawal; Academic Press, 2nd Ed. 1994.

Page 47: EP Syllabus

I

9. “Fiber optic Communication Systems” by G. Agrawal; John Wiley and sons, New York, 10. 1992 11. “Fiber Optics Handbook for engineers and scientists” by F.C. Allard; McGraw Hill, New York

Theory Paper IIIEP 313 Quantum Information And Computing

L T P Credits 3 1 0 04

UNIT I

Introduction to Turing machines-classical probabilistic and deterministic Turing machines, Quantum Turing machines; introduction to computability, complexity, classical complexity and quantum complexity classes-Quantum Physics and Computers.

UNIT II

Review of Quantum Mechanics- state vectors, superpositions, UNITary operators, hermitian operators, Schrödinger equation, Hamiltonian evolution, the concept of quantum measurement, the concept of qubits, quantum registers and quantum gates

UNIT III

Quantum Algorithms. Introduction to quantum algorithms, Deutsch’s algorithm, Shor’s algorithm and Grover’s search Algorithm, Physical implementation of simple quantum gates.

UNIT IV

Quantum Cryptography and Quantum Teleportation, real physical   systems and technological feasibility Heisenberg uncertainty principle.

UNIT V

Polarization states of photons, quantum   cryptography using polarized photons, entanglements.Introduction to the EPR paradox, BELL’s theorem, Bell basis, teleportation of a single qubit.

UNIT VI

Review of some current experiments and candidate physical systems, technological feasibility of a quantum computer and the limitations imposed   by noise.

Text Books/Reference Books

Page 48: EP Syllabus

I

1. Introduction to Quantum Computation and Information By Hoi-Kwong Lo, Tim Spiller, Sandu Popescu (World Scientific 1998).

2. The Quantum Computer by Jacob West (April 28, 2000)

Theory Paper IVEP 314 MICROWAVE ENGINEERING

L T P Credits 3 1 0 04

UNIT I

Introduction and review of transmission lines, Applications of Microwaves. Waveguide components and applications- Coupling Mechanisms – Probe, Loop, Aperture types. Waveguide Discontinuities – Waveguide irises, Tuning Screws and Posts, Matched Loads. Waveguide Attenuators – Resistive Card, Rotary Vane types; Waveguide Phase Shifters – Dielectric, Rotary Vane types. Waveguide Multiport Junctions – E plane and H plane Tees, Magic Tee, Hybrid Ring; Directional Couplers – 2 Hole, Bethe Hole types.

UNIT II

Ferrites– Composition and Characteristics, Faraday Rotation; Ferrite Components – Gyrator, Isolator, Circulator. Scattering Matrix– Significance, Formulation and Properties. S Matrix Calculations for – 2 port Junction, E plane and H plane Tees, Magic Tee, Directional Coupler, Circulator and Isolator.

UNIT III

MICROWAVE SOLID STATE DEVICES: Introduction, Classification, Applications. TEDs – Introduction, Gunn Diode – Principle, RWH Theory, Characteristics, Basic Modes of Operation, Oscillation Modes. Avalanche Transit Time Devices – Introduction, IMPATT and TRAPATT Diodes.

UNIT IV

MICROWAVE TUBES – I: Limitations and Losses of conventional tubes at microwave frequencies. Microwave tubes – O type and M type classifications. O-type tubes : 2 Cavity Klystrons – Structure, Reentrant Cavities, Velocity Modulation Process and Applegate Diagram, Bunching Process and Small Signal Theory – Expressions for o/p Power and Efficiency. Reflex Klystrons – Structure, Applegate Diagram and Principle of working, Mathematical Theory of Bunching.

UNIT V

HELIX TWTS: Significance, Types and Characteristics of Slow Wave Structures; Structure of TWT and Amplification Process (qualitative treatment), Suppression of Oscillations, Nature of the four Propagation Constants, Gain Considerations.

UNIT VI

M-type Tubes- Introduction, Cross-field effects, Magnetrons – Different Types, 8-Cavity Cylindrical Travelling Wave Magnetron – Hull Cut-off and Hartree Conditions, Modes of Resonance and PI-Mode Operation.

Text Books/Reference Books

1. Microwave Devices and Circuits – Samuel Y. Liao, PHI, 3rd Edition,1994.

Page 49: EP Syllabus

I

2. Microwave Principles – Herbert J. Reich, J.G. Skalnik, P.F. Ordung and H.L. Krauss, CBS Publishers and Distributors, New Delhi, 2004.

3. Foundations for Microwave Engineering – R.E. Collin, IEEE Press, John Wiley, 2nd Edition, 2002.4. Microwave Circuits and Passive Devices – M.L. Sisodia and G.S.Raghuvanshi, Wiley Eastern Ltd., New Age

International Publishers Ltd., 1995.5. Microwave Engineering Passive Circuits – Peter A. Rizzi, PHI, 1999.6. Electronic and Radio Engineering – F.E. Terman, McGraw-Hill, 4th ed., 1955.

Theory Paper VEP 315 Fabrication and Characterization of Nanostructures

L T P Credits 3 1 0 04

UNIT IX-ray Diffraction, Bragg’s law, Application in crystallography, Diffractogram, Paricle size determination using XRD. Probe techniques: Atomic force Microscopy (AFM), scanning electron microscopy (SEM), Scanning tunneling microscopy (STM), Transmission Electron Microscopy (TEM), High Resolution Transmission Electron Microscopy (HRTEM).

UNIT IIInfrared Spectroscopy, Raman Spectroscopy, Electronic spectroscopy for atoms and molecules, Spin Resonance Spectroscopy, Nuclear Magnetic Resonance spectroscopy (NMR)

UNIT IIIDe ep level transient spectroscopy (DLTS), Kelvin-probe measurements. Nanoscale current-voltage (I-V) investigations, Capacitance-Voltage (C-V) Relationships. NST- 203 Processing & Fabrication of Nanostructures (3-0-0):

UNIT IVFundamental concepts of Bottom-up and top down approaches, self assembly and self organization, formation of nanostructure by mechanical milling (ball milling). Synthesis of carbon nanotubes, growth mechanism, arc discharge, laser ablation, sputtering and growth from solutions and melts

UNIT VChemical vapor deposition, plasma enhanced CVD, thermal CVD, vapor phase growth, laser assisted thermal CVD, CoMoCat process, High pressure CO dispropornation process, flame synthesis, pulsed laser deposition (PLD)

UNIT VIFabrication of nanoparticles, synthesis of colloidal particles, synthesis of nanogold particles, synthesis of nanocomposites and nanostructures, fabrication of quantum dots, nanowires, nanorods, nanointermetallics, controlled colloidal synthesis, Synthesis of polymer supported clusters and polymeric nanofibersNanolithography, electron beam and focused ion beam lithographies, other relevant current topicsText Books/Reference Books

1. Nanotechnology by Gregory Timp2. Introduction to Nanoscale Science & Technology by M Di Ventra et al3. Nanophotonics by Paras N Prasad4. Microlithography Sciences & Technology – Sheats J R and Amith B W (Marcel Dekker Inc. New York)5. Nanolithography: A borderland between STM, EB, IB and X-ray lithographies- M. Gentili et al (Springer)6. Nanostructures & Nano Materials : Ghuzang Cao

Page 50: EP Syllabus

I

7. Handbook of Nanophase & Nanomaterials (vol. I&II) : Zhong Lin Wang 8. Fabrication of fine pitch by holography, electron beam lithography and nano-imprint lithography (proceeding

papers) Author(s): Darren Goodchild; Simon Wingar; Nak Kim.9. Microfabrication and Nanomanufacturing- Mark James Jackson10. Processing & properties of structural nanomaterials- Leon.L.Shaw(editor)11. Fundamentals of molecular spectroscopy : C. N. Banwell, Tata McGraw

Page 51: EP Syllabus

I

B.TECH. (EP) III-Year, VI-Semester Practical PapersEP 316 Fiber optics and optical communication lab

L T P 0 0 2

Laboratory experiments will be set in consonance with the material covered in Fiber optics and optical communication course.

EP 317Advanced Physics Lab 2L T P

0 0 2

Laboratory experiments will be set in consonance with the material covered in theory courses 1 and 2 .

EP 318 Minor Project-II

L T P 0 0 6

EP 319 Industrial Training

L T P ------

Page 52: EP Syllabus

I

Course CurriculumB.TECH. (EP) IV-Year, VII-Semester

Theory Paper 1EP 401 Computer Networking

L T P Credits 3 1 0 0 4

UNIT IOSI Reference Model and Network Architecture: Introduction to Computer Networks, Example networks ARPANET, Internet, Private Networks, Network Topologies: Bus-, Star-, Ring-, Hybrid -, Tree -,Complete -, Irregular –Topology.

UNIT II Types of Networks : Local Area Networks, Metropolitan Area Networks, Wide Area Networks; Layering architecture of networks, OSI model, Functions of each layer, Services and Protocols of each layer

UNIT IIITCP/IP: Introduction, History of TCP/IP, Layers of TCP/IP, Protocols, Internet Protocol, Transmission Control Protocol , User Datagram Protocol, IP Addressing, IP address classes, Subnet Addressing, Internet Control Protocols, ARP, RARP, ICMP, Application Layer, Domain Name System, Email – SMTP, POP,IMAP; FTP, NNTP, HTTP, Overview of IP version 6.

UNIT IV Local Area Networks: Introduction to LANs, Features of LANs, Components of LANs, Usage of LANs, LAN Standards, IEEE 802 standards, Channel Access Methods, Aloha, CSMA, CSMA/CD, Token Passing, Ethernet, Layer 2 & 3 switching, Fast Ethernet and Gigabit Ethernet, Token Ring, LAN interconnecting devices: Hubs, Switches, Bridges, Routers, Gateways.

UNIT VWide Area Networks: Introduction of WANs, Routing, Congestion Control, WAN Technologies, Distributed Queue Dual Bus (DQDB), Synchronous Digital Hierarchy (SDH)/ Synchronous Optical Network (SONET). UNIT VI Asynchronous Transfer Mode (ATM), Frame Relay, Wireless Links. Introduction to Network Management: Remote Monitoring Techniques: Polling, Traps, Security management, Firewalls, VLANs, Proxy Servers.

Text Books/Reference Books

1. Computer Networks (3rd edition), Tanenbaum Andrew S., International edition, 1996.2. Data Communications, Computer Networks and Open Systems (4th edition), Halsall Fred, 2000,

Addison Wesley, Low Price Edition.3. Computer Networks – A System Approach, Larry L. Peterson & Bruce S. Davie, 2nd Edition4. Computer Networking – ED Tittel , 2002, T.M.H.

Page 53: EP Syllabus

I

Theory Paper IIEP402 Alternative Energy Storage and conversion devices

L T P Credits 3 1 0 04

UNIT IIntroduction to Renewable Energy Sources, Solar Energy: Principles and scope, solar radiation, Energy collection and devices.

UNIT IIPrinciple of Wind Energy Conversion. Tidal and geothermal Energy.

UNIT IIIBio-Energy : Biomass and its uses, Classification of biomass, Biomass as a source of energy, Characteristics of biomass, Biomass conversion processes, Buiqueting of biomass, Gasification and combustion of biomass, Gasifiers.

UNIT IVConversion & storage energy devices: fuel cells, lithium Ion, Pb-acid, Ni-Metal hydride secondary batteries.

UNIT VHydel Energy : Types of Hydro Power Plants, Hydro Power Estimates – Hydrological analysis, Flow & power duration curves, Effect of storage, load analysis & Pondage requirement, estimates of Primary and Secondary Power.

UNIT VIWater Ways – Fourbay, trashtacks, intake gates, air inlets, power canal, surges in power canal and penstocks. Types & working of surge tanks. Hydraulic Turbines – Types of turbines, their parts and working, Governing and controls of turbines.

Text Books/Reference Books

1. Hand book of Energy Audits by Albert Thuman, P.E.,C.E.M.2. Energy management by Paul’Callaghan

Page 54: EP Syllabus

I

Theory Paper III EC 403- Mobile and Satellite Communication

L T P Credits 3 1 0 04

UNIT I Introduction to wireless communication: Evolution of mobile communications, mobile radio systems- Examples, trends in cellular radio and personal communications. Cellular Concept: Frequency reuse, channel assignment, hand off, Interference and system capacity, tracking and grade of service, Improving Coverage and capacity in Cellular systems, Free space propagation model, reflection, diffraction, scattering. UNIT II Modulation Techniques: Minimum Shift Keying, Gauss ion MSK, M-ary QAM, M-ary FSK, Orthogonal Frequency Division Multiplexing, Performance of Digital Modulation in Slow-Flat Fading Channels and Frequency Selective Mobile Channels. Coding: Vocoders, Linear Predictive Coders, Selection of Speech Coders for Mobile Communication, GSM Codec, RS codes for CDPD. UNIT IIIMultiple Access Techniques: FDMA, TDMA, CDMA, SDMA, Synchronous & Statistical TDM, North American digital multiplexing hierarchy, European TDM, Spread spectrum: Frequency Hopping & Direct Sequence spread spectrum. Terminal handling & polling. UNIT IVSwitched Communication Networks: Circuit, Message, Packet & Hybrid Switching, Softswitch Architecture with their comparative study, X.25, ISDN. Capacity of Cellular CDMA and SDMA. Second Generation and Third Generation Wireless Networks and Standards, WLL, Blue tooth. AMPS, GSM, IS-95 and DECTUNIT VIntroduction to satellite communication, Satellite Systems, Orbits and constellations: GEO, MEO and LEO, Satellite space segment, Propagation and satellite links, Free-space loss, Attenuation, polarization, fading and scintillation, Link budget analysis. UNIT VISatellite Communication Techniques, FEC and ARQ, Satellite Communications Systems and Applications- INTELSAT systems, VSAT networks, GPS, GEO, MEO and LEO mobile communications, INMARSAT systems, Iridium, Globalstar, Odyssey

Text Books/Reference Books

1. T.S.Rappaport, "Wireless Communications: Principles and Practice, Second Edition, Pearson Education/ Prentice Hall of India, Third Indian Reprint 2003.

2. R. Blake, " Wireless Communication Technology", Thomson Delmar, 2003.

3. W.C.Y.Lee, "Mobile Communications Engineering: Theory and applications, Second Edition, McGraw-Hill International, 1998.

Page 55: EP Syllabus

I

Theory Paper IVEP 404 Elective I

L T P Credits 3 1 0 4

Theory Paper VEP 405 Open Elective

L T P Credits 3 1 0 4

B.TECH. (EP) IV-Year, VII-Semester Practical Papers

EP 406 Energy storage and conversion labL T P

0 0 2

Laboratory experiments will be set in consonance with the material covered in EP 402

EP 407 Mobile and Satellite Communication Lab L T P

0 0 2Laboratory experiments will be set in consonance with the material covered in VLSI and FPGA Design and Synthesis

EP 408 Major Project-I

L T P 0 0 8

EP 409 Industrial Training

L T P

Page 56: EP Syllabus

I

Course CurriculumB.TECH. (EP) IV-Year, VIII-Semester

Theory Paper IEP-411: VLSI and FPGA Design Synthesis

L T P Credits 3 1 0 04

UNIT 1 Enhancement mode & Depletion mode MOSFETs, Basic MOS inverter design, transfer characteristics, logic threshold, NAND \ NOR logic, transit time and inverter time delay, CMOS inverter, inverting and non-inverting type super buffers, noise margins.

UNIT IIMOS design rules. MOS layers, Stick diagrams, NMOS design layout diagrams, CMOS design, design rules and layout. Lamda based design rules.

UNIT IIIScaling of MOS Circuits. Functional limitations to scaling, reliability requirements for VLSI. Failure mechanism in VLSI, Fault finding in VLSI chips. Packaging of VLSI devices, packaging types. Packaging design consideration, VLSI assembly technology and fabrication technologies.  UNIT IVStatic Random Access Memories (SRAMs), SRAM Cell Structures, MOS SRAMArchitecture, MOS SRAM Cell and Peripheral Circuit, Bipolar SRAM, SOl, Advanced SRAM Architectures, Application Specific SRAMs. UNIT VDRAMs, MOS DRAM Cell, Failures in DRAM, Advanced DRAM Design and Architecture, High Density ROMs, PROMs, Bipolar & CMOS PROM, EEPROMs, Floating Gate EPROM Cell, Nonvolatile SRAM, Flash Memories. General considerations associated with VLSI design.

 UNIT VI Introduction to ASICs and FPGAs, Fundamentals in digital IC design, FPGA & CPLD Architectures, FPGA Programming Technologies, FPGA Logic Cell Structures, FPGA Programmable Interconnect and I/O Ports, FPGA Implementation of Combinational Circuits, FPGA Sequential Circuits, Timing Issues in FPGA Synchronous Circuits and Arithmetic Circuits.Text Books/Reference Books

1. Weste, “Principles of CMOS VLSI Design (2nd edition)”2. Dougles A. Pucknell and kamran Eshraghian, “Basic VLSI Systems and Circuits, Prentice Hall of

India Pvt. Ltd.3. Wayne Wolf, “Modern VLSI Design, 2nd Edition”. Prentice Hall.4. Ashok K.Sharma, " Semiconductor Memories Technology, Testing and Reliability ",Prentice Hall of

India Private Limited, New Delhi, 1997.5. Memories", Springer Publication.6. Wen C. Lin, "Handbook of Digital System Design", CRC Press.

Page 57: EP Syllabus

I

Theory Paper IIEP 412 Elective III

L T P Credits 3 1 0 04

Theory Paper IIIEP 413 Elective IV

L T P Credits 3 1 0 04

B.TECH. (EP) IV-Year, VIII-Semester Practical Papers

EP 414 Elective III/IV Lab

L T P 0 0 3

Laboratory experiments will be set in consonance with the material covered in elective III/IV course

EP-415 FPGA Design Lab L T P

0 0 3

EP 416 Seminar L T P

0 0 2

EP 417 Major Project-II

L T P 0 0 10

Page 58: EP Syllabus

I

MINORS

A. NANO SCIENCE AND TECHNOLOGY

A1. Nano Science and TechnologyL T P Credits

3 1 0 04

Unit-I

Concept of dimensionality of solids, 3D to 0D; Energy band structure in low dimensions, motion of electron in bands, Density of states,

Unit-II

Quantum wells and low dimensional systems, double quantum wells, wires, dots, rings size effects, Tunneling transport in low dimensional solids,

Unit-III

Behaviour of low dimension solids under electric and magnetic fields, Quantum mechanical treatment of low dimensional solids, Photon and phonon transport

Unit-IV

Optical absorption, interband absorption, optical properties, inter sub-band transitions, Two dimensional electron gas.

Unit-V

Current reservoirs and electron channels, conductance formula for nanostructures, quantized conductance, Ballistic transport,

Unit-VI

Manifestation of electron and photon confinement and its application in the design and development of nanoscale electronic and optical devices.

Text Books/Reference Books

1. Introduction to Nanoscale Science & Technology by M. Di Ventra et al2. Introduction to Nanotechnology by C P Poole Jr and Franks J Owens3. Quantum Electronics by A. Yariv4. Nanophotonics by Paras N Prasad

Page 59: EP Syllabus

I

A2. Introduction To SpintronicsL T P Credits

3 1 0 04UNIT I:

Introduction to Spintronics: GMR, CMR, TMR, Spin relaxation, Spin injection, Spin detection, Electron Spin in Solids: Pauli equation, Spin-Orbit coupling, Zeeman splitting

UNIT II:

Current density, Magnetization, Bloch states with SO coupling, Electronic structure of GaAs, Dresselhaus and Rashba spin splitting, Optical orientation and spin pumping, Stern-Gerlach experiments with electron spins, Detection of free electron spin.

UNIT III:

Spin Relaxation and Spin Dephasing: Bloch equations, T1 and T2 times, Elliot-Yafet mechanism with phonons, Dyakonov-Perel, Bir-Aronov-Pikus, hyperfine coupling mechanisms,

UNIT IV:

Concept of density matrix, pure and mixed states, spin kinetic equation, motional narrowing.

UNIT V:

Spin Injection: Spin-polarized transport, Electrochemical potential, Spin accumulation, Spin diffusion, FN junction, Rashba formalism of linear spin injection, Equivalent circuit model, Silsbee-Johnson spin-charge coupling.

UNIT VI:

Spintronic Devices: Datta-Das spin-FET, P-N junctions, Magnetic bipolar diode, Magnetic bipolar transistor, Magnetic tunneling devices

Text Books/Reference Books

1. Igor Zutic, J. Fabian, and S. Das Sarma, Spintronics: Fundamentals and Applications , Rev. Mod. Phys. 76, 323 (2004).

2. D.D. Awschalom, N. Samarath, and D. Loss, Semiconductor Spintronics and Quantum Computation (Springer, Berlin, 2002).

3. S. Datta, Electronic Transport in Mesoscopic Systems (Cambridge University Press, Cambridge, 1995).

Page 60: EP Syllabus

I

B. PHOTONICS

B1. Photonics

L T P Credits 3 1 0 04

UNIT IPropagation of EM waves in anisotropic Materials, Uniaxial and biaxial materials, Polarization Devices. Electro optic effects – Kerr and Pockels effects, Amplitude and Phase

UNIT IIModulators, Beam deflection and scanning devices.Magneto-optic effects – Faraday, Cotton-Mouton  and inverse Faraday effects, Optical diode and isolator.

UNIT IIIInteraction of light with acoustic waves, Acousto-optic modulators and beam deflectors and their application to laser, display and printing technologies. Nonlinear interaction of light with Matter, Origin of optical nonlinearities, Second order optical processes (SFG, DFG, SHG and OPA),

UNIT IVFrequency converters and their applications, Third order nonlinear optical processes (self action, self focusing, self phase modulation, optical bistability, degenerate four-wave-mixing and phase conjugation)

 UNIT VElectric and magnetic dipole transitions.  Einstein's transition probabilities.  Lifetime and collision broadening of atomic transitions.Doppler broadening. Master amplification. Rate equation for atomic transitions. Microwave solid state measures.

UNIT VI Optical resonators and lens waveguides. Lasers and their general characteristics. Resonant cavities and laser modes. Different types of lasers. Sample applications (scientific and technological)

Text Books/Reference Books

1. Baha E.A., Saleh and M.C. Teich, Fundamental of Photonics, John Wiley and Sons2. Ralf Menzel, Photonics, Springer Verlag3. R.W. Boyd, Nonlinear Optics, Acad. Press.

Page 61: EP Syllabus

I

4. A. Yariv, Optical Electronics, 4th ed. Holt Rinehart and Winston

B2. Integrated Optics

L T P Credits 3 1 0 04

UNIT I:

Principles of optical Integrated circuits; Theory of optical waveguides: Planer, Rectangular core and Rib waveguide, homogeneous and inhomogeneous waveguide;

UNIT II:

Coupled mode, theory: optical, waveguide couplers, tapers, bends;

UNIT III:

Passive and active waveguides-polarizer, Optical amplifier, modulators and switches; Opto-electronic integrated circuits

UNIT IV:

Simulation Tools and CAD packages for optical integrated circuits; Technology: Materials and Device process, patterning and Lithography, Deposition and Diffusion techniques

UNIT V:

Lithium Niobate based integrated optics technology- Process and Characterization

UNIT VI:

Application: Integrated optic devices and circuits for High speed long distance telecommunication, Optical processing and Optical computing.

Text Books/Reference Books

1. Integrated optics by Reinhard Marz-Artech House publisher2. Integrated optics by Robert G. Hunsperger-springer verlag3. Optical integrated circuits by Hiroshi Nishihara-Mcgraw Hill professional4. Glass integrated optics and optical fiber devices by S. Iraj Najafi-SPIE Publishing

Page 62: EP Syllabus

I

C. ROBOTICS AND INTELLIGENT SYSTEMS

C1. Introduction To Automation And Motion ControlL T P Credits

3 1 0 04UNIT I:

Introduction: Automation and Robotics, Definition, Basic Structure of Robots, Classification of Robots based on co-ordinate system, Present trends and future trends in robotics, Overview of robot subsystems

UNIT II

Components of Robot system-Manipulator, Controller, Power conversion UNIT etc, Specifications of robot, End Effectors and Actuators: Different types of grippers, vacuum & other methods of gripping

UNIT III

Overview of actuators, Internal & External sensors, position, relocking and acceleration sensors, proximity sensors, force sensors, touch slip laser range tinder, camera.

UNIT IV

Motion Planning and Controllers: On-off trajectory, relocking and acceleration profile, Cartesian motion of manipulator, joint interpolated control, Jacobian in terms of D-H matrix, Obstacle avoidance, Basic control system, control loops of robotic system, Fuzzy controllers.

UNIT V

Robot Vision: Machine Vision system, description, sensing, Digitizing, Image Processing and Analysis and Application of Machine Vision System, Robotic assembly sensors & Intelligent Sensors.

UNIT VI

Object recognition. Robots for Industrial Automation: Need for Automation, Robotics for automation. Robot Intelligence and Task Planning, MEMS (Micro Electro Mechanical Systems) – Introduction and working principle, Nano-robots

Text Books/Reference Books1. Fundamentals of Robotics: Analysis and Control – Robert J Schilling, PHI, NewDelhi

2. Robotic Engineering – Klafter, Thomas, Negin, PHI, New Delhi

3. Robotics for Engineers – Yoram Koren, McGraw Hill, New York

4. Fundamentals of Robotics – T.C. Manjunath, Nandu Publishers, Mumbai

Page 63: EP Syllabus

I

5. Robotics and Control- R. K. Mittal, I. J. Nagrath, TMH, New Delhi

6. MEMS and Microsystems Design and Manufacture- HSU, TMH, New Delhi

C2. Robotic Engineering L T P Credits

3 1 0 04

UNIT IRobotic manipulation – Automation and Robots – Robot Classification – Applications – Robot Specifications – Notation. Direct Kinematics: The ARM Equation – Dot and Cross products – Coordinate frames – Rotations – Homogeneous coordinates – Link coordinates – The arm equation – A five-axis articulated robot (Rhino XR-3) – A four-axis SCARA Robot (Adept One) – A six-axis articulated Robot (Intelledex 660).

UNIT II:Inverse Kinematics: Solving the arm equation – The inverse kinematics problem – General properties of solutions – Tool configuration – Inverse kinematics of a five-axis articulated robot (Rhino XR-3) – Inverse kinematics of a four-axis SCARA robot (Adept one) - Inverse kinematics of a six-axis articulated robot (Intelledex 660) - Inverse kinematics of a three-axis articulated robot – A robotic work cell.

UNIT IIIWorkspace analysis and trajectory planning: Workspace analysis – Work envelop of a five-axis articulated robot – Work envelope of a four-axis SCARA robot – Workspace fixtures – The pick-and-place operation – Continuous-path motion – Interpolated motion – Straight-line motion. Differential motion and statics: The tool-configuration Jacobian matrix – Joint-space singularities – Generalized Inverses – Resolved-Motion rate control:n<=6

UNIT IVRate control of redundant robots:n>6 – rate control using {1}-inverses – The manipulator Jacobian – Induced joint torques and forces. Manipulator Dynamics: Lagrange’s equation – Kinetic and Potential energy – Generalized force – Lagrange -Euler dynamic model – Dynamic model of a two-axis planar articulated robot - Dynamic model of a three-axis SCARA robot – Direct and Inverse dynamics – Recursive Newton-Euler formulation – Dyamic model of a one-axis robot.

UNIT VRobot control: The control problem – State equation – Constant solutions – Linear feedback systems - Single-axis PID control – PD-Gravity control – Computed-Torque control – Variable-Structure control – Impedance control, Robot vision – Image representation – Template matching – Polyhedral objects –

UNIT VI: Shape analysis – Segmentation – Iterative processing – Perspective Transformations – Structured illumination –Camera calibration. Task planning: Task-level programming – Uncertainty – Configuration space – Gross-Motion planning – Grasp planning – Fine-Motion planning – Simulation of planar motion – A task-planning problem.

Text Books/Reference Books

1. Robert J.Schilling, “Fundamentals of Robotics – Analysis & Control”, Prentice Hall of India Pvt. Ltd., 2002. (Chapters 1 to 9 – UNIT I, II, III, V)

2. Saeed B.Niku, “Introduction to Robotics – Analysis, Systems, Applications”, Prentice Hall of India Pvt. Ltd., 2003. (Chapters 6 & 7 – UNIT IV)

Page 64: EP Syllabus

I

D.NUCLEAR ENGINEERING

D1. Principles of Nuclear EngineeringL T P Credits

3 1 0 04UNIT I:Nuclear Physics- Nuclear model of the atom - Equivalence of mass and energy - Binding - Radio activity - Half life - Neutron interactions - Cross sections.

UNIT II:Nuclear Reactions and Reactor Materials- Mechanism of nuclear fission and fusion - Radio activity - Chain reactions - Critical mass and composition - Nuclear fuel cycles and its characteristics - Uranium production and purification - Zirconium, thorium, beryllium.

UNIT III:Reprocessing- Nuclear fuel cycles - spent fuel characteristics - Role of solvent extraction in reprocessing - Solvent extraction equipment.

UNIT IV:Nuclear Reactions- Reactors - Types of fast breeding reactors - Design and construction of fast breeding reactors - heat transfer techniques in nuclear reactors - reactor shielding.

UNIT V:Safety, Disposal and Proliferation- Nuclear plant safety- Safety systems - Changes and consequences of an accident - Criteria for safety –

UNIT VI:Nuclear waste - Type of waste and its disposal - Radiation hazards and their prevention - Weapons proliferation.

Text Books/Reference Books1. Thomas J.Cannoly, " Fundamentals of Nuclear Engineering ", John Wiley (1978).2. Collier J.G., and G.F.Hewitt, " Introduction to Nuclear Power ", (1987), Hemisphere

Publishing, New York.3. Lamarsh U.R. " Introduction to Nuclear Engineering Second Edition ", (1983), Addison

Wesley M.A.4. Lipschutz R.D. " Radioactive Waste - Politics, Technology and Risk ", (1980), Ballingor,

Page 65: EP Syllabus

I

Cambridge. M.A

D2. Nuclear Materials For Engineering Applications L T P Credits

3 1 0 04UNIT IOverview of Nuclear Systems- Various types [LWR, PHWR, GCR, FBR, Fusion], Materials – Selection, Nature of Materials, Crystal Structure

UNIT IIImperfections, Diffusion in Solids, Radiation Damage, Binary Elastic Collisions, Displacements due to PKA.

UNIT IIIProperties of Materials, Mechanical Properties, Fracture, Fatigue and Creep, SCC (& corrosion), Dislocation Theory, Types, Stress Fields and Strain Energy

UNIT IVForces on Dislocations, Dislocation Interactions, Dislocation Sources and Pile-ups, Hardening: Dislocation, Precipitation, Grain-boundary, Solution, Strain.

UNIT VRadiation Effects, Microstructural Changes, Friction and Source Hardening, Fracture and DBTT, Embrittlement and Fracture

UNIT VIReactor Materials, LWR Core Materials Radiation Growth – Zircaloys, Void Swelling (Stainless Steels), Radiation Induced vs Radiation Enhanced Creep, Pressure Boundary Materials, Fusion Materials

Text Books/Reference Books1. D.R. Olander, Fundamental Aspects of Nuclear Reactor Elements, NTIS, ERDA (1975)2. D.Hull and D.J. Bacon, Introduction to Dislocations, Pergamon Press (1965)3. C.O. Smith, Nuclear Reactor Materials, Addison-Wesley (1967)4. W.D. Callister, Materials Science and Engineering, Wiley (1991)5. G.S. Was, Fundamentals of Radiation Materials Science, Springer (2007)