environmental equipment inc. - imr usa environmental equipment inc.pdf · •adjustable tick rate...
TRANSCRIPT
WWW.IMRUSA.COM
AGENDA
• WHO WE ARE
• WHAT DO WE DO
• OUR PRODUCTS
• WHAT IS OUR FUTURE
IMR Environmental Equipment, Inc. 2
WWW.IMRUSA.COM
WHO WE ARE
IMR Environmental Equipment, Inc. 3
• IMR products are well known around the world
• IMR was founded in 1984
• Our main product line is based on the monitoring of flue gases
• We have a strong presence in emerging markets
• We tribe on our long history of excellence and quality products
WWW.IMRUSA.COM
WHO WE ARE
• Our products are always based on the latest technologies
• There is not a request for a product specification that we cannot meet
• Our technical support is among the best in the world
• We are located at: 3634 Central Ave
Saint Petersburg, FL 33711 USA
IMR Environmental Equipment, Inc. 4
WWW.IMRUSA.COM
WHAT WE DO
• IMR specializes is the custom built of portable flue
gas monitoring and stationary CEMS (Continuous
Emission Monitoring System)
• IMR product range goes from single sensor-cell
hand-held instruments to multi-channel monitoring
systems
• IMR uses the latest technology in NDIR an electro-
chemical sensors to measure flue-gas
concentration
IMR Environmental Equipment, Inc. 5
WWW.IMRUSA.COM
WHAT DO WE DO
IMR Environmental Equipment, Inc. 6
• We offer
Engineering services
• We have also
created complete
mobile measuring
laboratories being
used around the
world
WWW.IMRUSA.COM
OUR PRODUCTS
• IMR2800 Series
• IMR1400 Series
• IMR1440C/FL Series
• IMR1000 Series
• IMR Measuring Instruments
• IMR5000 / IMR400 units
IMR Environmental Equipment, Inc. 7
WWW.IMRUSA.COM
IMR2800 SERIES
• Latest sensor technology for more accurate measurement and a longer life time
• Continuously and simultaneously measuring up to 18 parameters
• Can measure the combination following gases CO, O2, NO, SO2, HCl, N2O, CL2, H2, NH3, HC or H2S
• Prepared for high temperature measurement (up to 2732 °F / 1500 °C)
IMR Environmental Equipment, Inc. 8
WWW.IMRUSA.COM
IMR1400 SERIES
• Inexpensive general purpose unit
• Can be programmed with special fuels
• Can hold up to 4 sensors
• Can measure the combination following gases CO, O2, NO, SO2, HCl, N2O, CL2, H2, NH3, HC or H2S
• Prepared for high temperature measurement (up to 2732 °F / 1500 °C)
IMR Environmental Equipment, Inc. 9
WWW.IMRUSA.COM
IMR 1440FL/COFL SERIES
• Designed with a high CO measurement range
• Special flexible probe for hard to reach exhaust pipes
• Measures air temperature, flue gas temperature, Oxygen O2, Carbon monoxide CO (H2 comp.), Nitric oxide NO, losses, excess air, combustion efficiency, draft, Carbon dioxide CO2 and soot
• Optional: Soot Meter, RPM Meter, CDA100A Kit
IMR Environmental Equipment, Inc. 10
WWW.IMRUSA.COM
IMR1000 SERIES
IMR Environmental Equipment, Inc. 11
• The IMR 1000 is a hand held pocket size stack gas analyzer for combustion tests on boilers, burners, etc. The IMR 1000-1/IMR 1000-2 have up to two sensors with a 2-line LCD while the IMR 1000-3/IMR 1000-4 have a 4-line LCD with up to 3 sensors • small, rugged and easy to operate
• up to 3 sensors
• Memory
• Infrared interface for a printer
• Reliable technology and easy to service
• Measures O2, CO, NO, Draft/pressure, and Stack gas temp
• Calculates CO2, excess air, efficiency and CO air free(cor. to 0% O2)
WWW.IMRUSA.COM
IMR1050X SERIES
• The IMR 1050X is a hand held pocket size stack gas analyzer for combustion tests on boilers, burners, etc. • small, rugged and easy to operate • up to 3 sensors
• Infrared interface for a printer • 179 memory positions • CO readings to 1 ppm • User customizable parameters view • Measures CO, NO, CO2, Inlet
Temp/Flue Temp, and Hi-Res Differential Manometer
• Calculates O2, Efficiency, Net Temp/ Flue, Excess Air, Differential Temp/Pressure
IMR Environmental Equipment, Inc. 12
WWW.IMRUSA.COM
IMR Environmental Equipment, Inc. 13
IMR MEASURING INSTRUMENT SERIES
• CDA100 Combustible gas leak detector • Adjustable tick rate
• Tip Light in sensor cover illuminates the area of the leak
• Audio and visual tick rate
• DT301/DT302/DT304 Digital Thermometer
• Temperature measurement with one (DT301) or two (DT302) inputs or four (DT304) inputs
• Accepts K, J, T or E thermocouples
• Time-stamped multifunction record
• DFM3 Thermo Anemometer • Free rotating vane wheel ensures highest
accuracy
• Displays air velocity and temperature simultaneously
WWW.IMRUSA.COM
IMR Environmental Equipment, Inc.
IMR MEASURING INSTRUMENT SERIES
• IX616 Ambient Air Gas Detector
• Multiple Gases O2, CO, H2S, CH4
• High and low alarms
• TX450 Temperature Data logger
• Type K, J, E, and T
• Up to4 channels
• DA75 Dust Emission Monitor • Continuous particulate monitor for
emission control and arrestment plant performance monitoring.
WWW.IMRUSA.COM
IMR Environmental Equipment, Inc.
IMR MEASURING INSTRUMENT SERIES
• SOOTMETER Digital Soot Scale • Measures the soot number from 0.0 to 9.9
• More reliable than a paper scale
• Approximately 100,000 measurements on one set of batteries
• RLD10 Refrigerant Leak Detector
• Adjustable tick rate
• Automatically detects all existing refrigerants and blends
• Audio and visual tick rate
For more information regarding our IMR Measuring Instrument Series please visit our
website:
WWW.IMRUSA.COM
WWW.IMRUSA.COM
IMR5000
• The IMR 5000 is a state-of-the-art continuous flue-gas monitoring system, and is designed for a wide variety of flue-gas monitoring applications
• The IMR 5000 is a stand-alone analyzer that works automatically. The rugged wall mounted enclosure meets NEMA type 4X (IP65) standards
• The modular approach of the IMR 5000 allows one or more gases (up to 8) to be measured simultaneously.
• The IMR 5000 uses the latest sensor technology from electro-chemical sensors up to NDIR benches
IMR Environmental Equipment, Inc.
WWW.IMRUSA.COM
IMR 5000
• The system can analyze samples taken from up to 4
different sampling points. This sequential
measurement is only possible with the addition of
multiple gas sampling and conditioning devices
(IMR 400)
• The IMR 5000 offers various outputs such as a serial
interface (RS232/RS485), an analog output (volt /
current) and an alarm (relay)
• All of the above features allow the IMR 5000 to be
configured for a variety of applications and can
easily be upgraded in the future.
IMR Environmental Equipment, Inc. 17
WWW.IMRUSA.COM
IMR400
IMR Environmental Equipment, Inc. 18
• The IMR 400 is a wall-mounted flue-gas dryer, and is designed to prepare flue-gases for a wide variety of gas monitoring applications
• A stand-alone system that works automatically
• The heated hose keeps the sample hot until it reaches the IMR 400
• The system then removes the water vapor with a permeation dryer or a peltier-cooler from the hot sample
WWW.IMRUSA.COM
IMR400
• The IMR 400 is designed to prepare flue-gases for the IMR 5000 flue-gas analyzing system
• The IMR 400 is equipped with a 5 ft. (1.5m) heated sample line. This 'heated hose' ensures that the extracted sample does not cool down before it reaches the drying system
IMR Environmental Equipment, Inc. 19