engineers /// fabricators /// constructors turnkey rng … · 2019-09-04 · from the...
TRANSCRIPT
ENGINEERS /// FABRICATORS /// CONSTRUCTORS
TURNKEY RNG SYSTEM
TURNKEY RNG SYSTEMRoeslein has become an industry leading expert at building, owning, and operating RNG facilities, fully designed biogas system processes, and managing the related regulatory compliance landscape. Roeslein is the first company to achieve EPA D3 Renewable Identification Number (RIN) Virtual Pipeline Pathway Approval using its turnkey Renewable Natural Gas (RNG) System. Roeslein’s turnkey RNG system combines fully integrated plug-n-play skids that monetize the manure to RNG process for farmers and project stakeholders, allowing them to diversify their income streams, reduce waste, and most importantly provide a renewable energy source for our nations vehicle fuel and power generation infrastructure.
Roeslein is experienced in the design, detail engineering, fabrication, construction, commissioning, and start-up of the entire biogas pathway; from the lagoon/plug-flow anaerobic digester to injection of product gas into the interstate/local distribution (LDC) pipelines. Roeslein’s team of subject matter experts have designed, tested and implemented a series of technologies, equipment configurations, compression systems, gas purification and instrumentation models, along with transport and injection scenarios, allowing for the development of its turnkey RNG System. Roeslein has implemented numerous swine, dairy, and waste-water treatment biogas to RNG projects using this approach.
PROJECT DEVELOPMENT AND REGULATORY COMPLIANCERoeslein’s achievement with the EPA has required extensive regulatory understanding and demonstrated design and data collection compliance. For all initial project development efforts, Roeslein’s subject matter experts can provide a variety of services, which involve both front-end planning and relevant back-end compliance.SERVICES
• CapEx Assessment and Budgeting • Feedstock Analysis• Off-take Guidance• Implementation Strategy (Direct Inject, Hub-n-Spoke, Local
Gathering)• Project Registration/Approvals with EPA – Engineering
Review, RIN Generation Protocol • Project Registration/Approvals with California Air Resources
Board (ARB), if applicable – Greet 3.0 modeling, Initial reporting period data gathering
• RIN Generator for project – EPA Moderated Transaction System compliance and reporting requirements
Turnkey RNG System in Fabrication
RNG System Skid
RNG Cleaning and Processing System
Roeslein knows the manure to RNG process can be complicated. It’s team of professionals understand the complex and numerous processes of tracking the CH4 molecule through the entire pathway, as well as managing the accounting process. Roeslein provides a variety of operational maintenance and energy management services tailored to guiding you to your quickest return on your investment. Roeslein’s operational maintenance and energy management services include:
OPERATIONS AND ENERGY MANAGEMENT
LEADING BENEFITS
• Detailed Operations Manual• Lessons Learned Matrix and Key Maintenance Items• Create and Manage Data Gathering System• Key Equipment Monitoring Services• Continuous Data Verification• Data Accuracy Verifications• Equipment Monitoring Plan• Monthly Q-RIN Verification• Manage 3rd Party Meter Records
DESIGN, BUILD, OPERATE IN-HOUSE BIOGAS CLEANING SYSTEM• Designed, fabricated, installed, and operated modular biogas to RNG systems that are cost-effective and easy to install• Utilize membrane-based technology, partnering with internationally recognized Air Products for their proprietary membranes – up to
800 scfm system per module and 6,000 ppm H2S• Methane recovery > 95%, meeting pipeline gas quality specs, and low cost of operations• Fully integrated, truckable, modular format includes feed compressor, enclosed membrane system, H2S scrubber vessels, all
interconnecting piping, electrical, controls, cable wiring, and instrument monitoring for RFS and LCFS compliance• Performance guarantees, field operations support, setup, and maintenance included• Optimal for outdoor locations, but convertible to “under roof applications”
DIGESTER TO PIPELINE “KNOW-HOW”• Developed, designed, built, covered, and provided operations on more than 40 livestock lagoon anaerobic digesters• Operating know-how to maximize biogas capture, lagoon cover management, and cost effective operations• Understand necessities & nuisances of varying design basis conditions for optimal blower/chiller gas conditioning systems, gathering
pipelines, feed compressor systems, membrane & non-membrane gas cleaning system, product compressor, tailgas destruction, glycol/heat exchanger systems, critical moisture control management, metering equipment, and instrumentation
• Designed, engineered, built, provided start-up operations for RNG tube trailer truck loading and unloading facilities for virtual pipeline• Extensive experience with assorted OEM’s for other critical RNG facility elements (flares, TOX units, driers, gas flow & concentration
sample metering / detailed metering)• Extensive experience in developing and implementing programming and systems controls for both on-site and remote operations
Engi
neer
s /
// F
abri
cato
rs /
// C
onst
ruct
ors
///
ww
w.r
oesl
ein.
com
Roeslein & Associates, Inc., headquartered in St. Louis, Missouri, USA, is a global leader in engineering, procurement, modular fabrication, and construction of industrial plant facilities, while providing a wide range of technical services and engineered products to various process industries. Since the company first introduced its specialized approach – Prefabrication, Preassembly, Modularization – it has remained at the forefront of the latest advances in modularized approaches to large capital projects.
Firmly establishing itself over its successful history, Roeslein & Associates is now an employee-owned company that has steadily grown in size with offices in the North America, Europe, and Asia. Roeslein differentiates itself from traditional Engineering and Construction firms by providing unique approaches to project implementation, strongly emphasizing the execution of its design, and by focusing on a few select manufacturing processes to completely understand and support the technology of its clients.
COMPANY OVERVIEW
NORTH AMERICAHeadquarters
Sales & Client SupportEngineering
Modular FabricationConstruction ServicesFour Total Locations
EUROPESales & Client Support
EngineeringModular Fabrication
Construction ServicesCentrally Located
ASIASales & Client Support
EngineeringModular Fabrication
Construction ServicesServing Regional Clients
Learn MoreWWW.ROESLEIN.COM
Request Information+1 314 729 0055
Engi
neer
s /
// F
abri
cato
rs /
// C
onst
ruct
ors
///
ww
w.r
oesl
ein.
com