engel training 2017-11 · pdf filefast track learning! ... passing the exam, ... the engel...
TRANSCRIPT
![Page 1: ENGEL Training 2017-11 · PDF fileFast track learning! ... passing the exam, ... the ENGEL e-trainer provides a unique injection moulding machine simulation on a CD and has estab](https://reader031.vdocuments.us/reader031/viewer/2022021504/5a9dc6da7f8b9a0d5a8c028d/html5/thumbnails/1.jpg)
More efficiency in injection moulding.Training
![Page 2: ENGEL Training 2017-11 · PDF fileFast track learning! ... passing the exam, ... the ENGEL e-trainer provides a unique injection moulding machine simulation on a CD and has estab](https://reader031.vdocuments.us/reader031/viewer/2022021504/5a9dc6da7f8b9a0d5a8c028d/html5/thumbnails/2.jpg)
Training_32_Training
Enhanced product quality, more stable processes and boosted output with maximum of good parts - A thorough understanding of the injection moulding machine, the robot and interaction of individual process steps enables you to get more out of your injection moulding system. ENGEL training assists you in achieving this goal with extremely comprehensive and practical training courses. These range from seminars and special workshops to certified training which can be tailored to your company's specific needs upon request.
Whether for beginners or the more advanced - ENGEL training will make you and your employees fit for the current injection moulding challenges.
With ENGEL training.More knowledge. More productivity.
![Page 3: ENGEL Training 2017-11 · PDF fileFast track learning! ... passing the exam, ... the ENGEL e-trainer provides a unique injection moulding machine simulation on a CD and has estab](https://reader031.vdocuments.us/reader031/viewer/2022021504/5a9dc6da7f8b9a0d5a8c028d/html5/thumbnails/3.jpg)
Training_54_Training
The Seminar program Overview
Standard and specialist seminars
Standard seminars cover many different aspects of operation, maintenance and process engineering. The following pages provide an overview of the training modules.
Special seminars are tailor-made to reflect the customer's individual requirements and are also available for older or custom-built machines - on your premises, using your own machines, or - thanks to the ENGEL e-trainer live - directly via the Internet.
ENGEL Process engineering
SEMINAR OPERATING AND PROCESS ENGINEERING - LEVEL III
SEMINAR OPERATING AND PROCESS ENGINEERING - LEVEL I
ENGEL Operation
ENGEL operator basics (EOB) Basic skills for operating ENGEL injection moulding machines
10
SEMINAR LEVEL IV
SEMINAR LEVEL V
ENGEL Process engineering
Technology process and quality control (TPQ) Quality assurance at injection moulding
17
SEMINAR OPERATING AND PROCESS ENGINEERING - LEVEL II
ENGEL Process engineering
Technology mould proving (TMP)Systematic mould trial and proving 17
ENGEL Process engineering
Technology plastic advanced (TPA) Identifying and cor-recting surface and injection errors
16
ENGEL Operation
ENGEL robotics basics (ERB)Basic skills for operating ENGEL viper linear robots
11
ENGEL Operation
ENGEL robotics advanced (ERA) Operation of ENGEL viper linear robots for advanced users
11
Technology plastic basics (TPB) Basic knowledge about plastics technology for injection moulders 16
ENGEL Maintenance
SEMINAR MAINTENANCE - LEVEL I
SEMINAR MAINTENANCE - LEVEL II
ENGEL operator maintenance (EOM)Operating ENGEL injection moulding machines for maintenance staff 12
ENGEL Maintenance
ENGEL control basics (ECB) Basic knowledge of control technology and engineering 12
ENGEL Maintenance
ENGEL maintenance victory (EMV)Maintenance of ENGEL injection moulding machines up to a clamp force of 5000 kN 15
ENGEL Maintenance
ENGEL hydraulic basics (EHB)Basic knowledge of hydraulic components
14
ENGEL e-training
e-trainer live - Customer-specific topics 08
e-learning platform - Various packages 09
ONLINE TRAINING
ENGEL Operation
ENGEL robotics six axis (ERS)Operating ENGEL easix KR robots
11
SEMINAR MAINTENANCE - LEVEL III
ENGEL Maintenance
ENGEL control victory (ECV) Control technology and engineering for ENGEL injection moulding machines up to a clamp force of 5000 kN - for advanced users
13
ENGEL Maintenance
ENGEL electrical machine (EEM) Control technology and engineering and maintenance for all-electric ENGEL injection moulding machines
13
ENGEL Maintenance
ENGEL robotics control (ERC) Control technology and maintenance of ENGEL viper linear robots 14
ENGEL Maintenance
ENGEL hydraulic advanced (EHA) Hydraulic systems on ENGEL injection moulding machines up to a clamping force of 5000 kN for advanced users
15
ENGEL Maintenance
ENGEL hydraulic duo (EHD)Hydraulic systems on ENGEL duo injection moulding machines for advanced users 15
ENGEL Maintenance
ENGEL ecodrive system (EES)Servohydraulic systems on ENGEL injection moulding machines 15
ENGEL Operation
ENGEL operator advanced (EOA) Operating of ENGEL injection moulding machines for advanced users
10
![Page 4: ENGEL Training 2017-11 · PDF fileFast track learning! ... passing the exam, ... the ENGEL e-trainer provides a unique injection moulding machine simulation on a CD and has estab](https://reader031.vdocuments.us/reader031/viewer/2022021504/5a9dc6da7f8b9a0d5a8c028d/html5/thumbnails/4.jpg)
Training_76_Training
CC TRAINING CENTERCERTIFIED
Herr Anton Langstätterhat die Abschlussprüfung des SpezialseminarsEinrichten und Bedienen von ENGEL MUCELL
Spritzgießmaschinen CC200Basiswissen über Steuerungs- und Regelungstechnik von ENGEL Spritzgießmaschinen
vom 04. April 2011 bis 05. April 2011
erfolgreich absolviert
Schwertberg, Mai 2011
RobertBrandstetter
Leitung ENGEL Training Centre Austria
Training
CerTifiedCC
bethe first.
ENGEL AUSTRIA GmbH | A-4311 Schwertberg | tel: +43 (0)50 620 0 | fax: +43 (0)50 620 3009
e-mail: [email protected] | www.engelglobal.com
TRAININGCERTIFIEDC
Modular and compact
Fast track learning! The modules of the ENGEL seminar program never take more than three days. This ensures that the par t icipants can easi ly absorb and assimilate the new ski l ls taught to them. Depending on previous knowledge, seminars are avai lable for beginners, advanced learners, or exper ts.
Small groups. Great effect.
The groups are typical ly restr icted to a maximum of eight par t icipants: This gives trainers the abil i ty to cater to the individual needs of every single seminar attendee and thus enhance each par t icipant's learning experience to the max. This in turn ensures per fect pace of learning and a personal atmosphere in which par t icipants can learn more effectively. Applications for seminars are dealt with on a f irst come, f irst served basis.
Hands-on: On the machine and the PC
Hands-on exercises on state-of-the-ar t injection moulding machines are an impor tant par t of our training program. The theoretical knowledge taught at the ENGEL Training Centre is immediately put into practice on real machines, helping to reinforce acquired ski l ls.
Addit ional ly, injection moulding can be trained on a PC with the ENGEL e-trainer. For more detai ls on the ENGEL e-trainer, see the next page.
Your company specific training. On your premises if so desired.
Are you looking to introduce training that is precisely tai lored to your company's needs in the scope of your staff development program? We would be pleased to help you develop individual training plans. We star t by col laborating in defining the target groups and then move on to test your staff 's knowledge base. You decide the t ime, place, content and scope of the training.
On request, special ist seminars can also be held on your premises, using your machines, your moulds and your peripheral technology. This saves your staff 's travel t ime and expenses.
Certified learning success: Acknowledged certificate "Certified Training"
I t is becoming increasingly impor tant for training par t icipants to receive objective feedback on how much knowledge has actual ly been conveyed. This explains why ENGEL offers f inal exams for al l regular courses worldwide. After passing the exam, successful par t icipation is confirmed by "Cer t i f ied Training" cer t i f icate, which is acknowledged throughout the industry.
International companies benefit from the global presence of ENGEL training centers. Thanks to a well-conceived quality assurance system, ENGEL ensures a uniformly high standard of training worldwide. This applies to both the trainers and the training centers.
Continuous professional development is the key to success so that trainers can of-fer consistent high quality: ENGEL trainers keep on top of the latest technological advanc-es thanks to workshops with the development depar tment and product management and at
train-the-trainer seminars. And: The training success is also made measurable. For this rea-son, the trainers themselves undergo regular testing to assess their knowledge levels.
A structured quality assurance system ensures top quality standards at all train-ing centers around the world. The Cer ti f ied Training Center logo documents this require-ment and confirms that the respective training center has successful ly par t icipated in regular audit ing and cer t i f ication processes.
Top level of quality for trainers and training centers. Worldwide. The Advantages
![Page 5: ENGEL Training 2017-11 · PDF fileFast track learning! ... passing the exam, ... the ENGEL e-trainer provides a unique injection moulding machine simulation on a CD and has estab](https://reader031.vdocuments.us/reader031/viewer/2022021504/5a9dc6da7f8b9a0d5a8c028d/html5/thumbnails/5.jpg)
Training_98_Training
ENGEL e-trainer
Developed for the ENGEL CC 200 generation of control units, the ENGEL e-trainer provides a unique injection moulding machine simulation on a CD and has estab-lished itself as a state-of-art component complementing the ENGEL training concept. ENGEL e-trainer cannot and is not designed to replace the trainer, but rather as a sup-plement to a previous course.
Like in a dry cycle, users can set up and operate a ma-chine with an ENGEL CC 200 control unit. Seminar par-ticipants can experiment with and learn on the injection moulding machine at their own pace, in an intuitive man-ner and realistically, but without any risk.
There is a limit to what you feel comfortable to try out on expensive equipment. The ENGEL e-trainer offers an environment - not only the inexperienced users - where even a fatal operator error cannot possibly damage the virtual machine. The software simulates and visualises the machine movements operated from a control panel on the PC monitor. This gives participants even more time for practical trials on a real machine.
ENGEL e-trainer live
ENGEL also offers seminars on the web. This removes the need for travel and saves time. Each training session can be stored on disk and repeated as individual need arises. The participants can easily link up with trainers via their PCs and the Internet.
e-training
The ENGEL e-learning platform offers ENGEL e-learning platform
• Basic skills German/English• Training manuals German/English• Knowledge testing with analysis option (both
structured as per the ENGEL seminar program)• General and customer-specific content• Access 24/7• Individual learning speed
Your benefits at the ENGEL e-learning platform
• Maximum flexibility • Very user friendly• Uniform competency level of all staff• More motivation• Saves travel expenses • Perfect knowledge management• Compact ENGEL know-how accessible at any time
The ENGEL e-learning platform access packages
Single Access: Authorized access to the platform content for individual employees for one month. Company Access: Unrestricted use of the platform content for all authorized staff of a company for one year.
Please note: All e-training content is offered as a supplement to and not as a replacement for personally attending classroom training.
ENGEL e-training
ENGEL e-learning platform The new independence in learning and training
ENGEL has bundled the versatile expertise of our experts and trainers and already made it accessible to our staff on the ENGEL e-learning platform. This best practice online knowledge management system is now available worldwide. The platform provides access to content with a focus on first steps, competence assessment as well as standard seminars. Simply request your access code and you can benefit from the comprehensive ENGEL know-how and professional ENGEL competency checks. Please contact your local training centre or mail [email protected] directly for details.
Seminar objective:After the seminar the participant knows the dif-ferences between the CC200 and CC300 con-trol units. The student has the necessary know-how to change to the new generation of control units and use all their advantages.
Seminar contents:• Components of the CC300 control unit• Operation concept• New functions• Differences to CC200
Seminar duration: 4 days
Seminar venue: Internet
Target group: Staff involved in setting up and operating machines
Prerequisites:Sound know-how in the operation of the CC200 control unit
Required items:• Internet access• Headset/Speakers and microphone• Software Microsoft Skype for Business
ENGEL e-Trainer LiveCC300 upgrade training
▼
![Page 6: ENGEL Training 2017-11 · PDF fileFast track learning! ... passing the exam, ... the ENGEL e-trainer provides a unique injection moulding machine simulation on a CD and has estab](https://reader031.vdocuments.us/reader031/viewer/2022021504/5a9dc6da7f8b9a0d5a8c028d/html5/thumbnails/6.jpg)
Training_1110_Training
ENGEL Operation
Operation
Seminar objective:After the seminar the participants will be capable of operating and setting up the clamping and injection units of ENGEL injection moulding machines. Participants will be able to perform setup operations and adjust production settings autonomously and effectively, taking ENGEL-specific control units into consideration.
Seminar contents:• Components of an injection moulding machine• Components and operation of the machine
control unit• Design and settings of the clamping unit• Components and setting of the injection unit• Error messages• Practical exercises:
- Settings - Test injections - Simulation of error messages
Seminar duration: 2 days
Target group: Set-up men, machine operators
Prerequisites:Basic knowledge of the injection moulding process, seminar TPB
ENGEL operator basics (EOB)Basic skills for operating ENGEL injection moulding machines
▼
Seminar objective:Perfecting ENGEL injection moulding machine operating skills. After the seminar, participants will be able to set up more complex sequences quickly and effectively, and perform production and quality optimisation.
Seminar contents:• Quality assurance programs (ENGEL
micrograph, ENGEL microplast)• ENGEL autoprotect• Freely programmable machine sequence• Practical exercises:
- Setting up freely programmable sequences - Operating the programs under production
conditions
Seminar duration: 2 days
Target group: Advanced operating staff: Set-up men, machine operators, mould proving staff, application technicians
Prerequisites:Good knowledge of the injection moulding process and of the machine operation, seminar EOB
ENGEL operator advanced (EOA)Operating of ENGEL injection moulding ma-chines for advanced users
▼
Seminar objective:Basic operations with ENGEL viper robot systems. After the seminar, participants will be familiar with the mechanical layout and the controls, and capable of setting up and using standard programs.
Seminar contents:• Layout of a robot system• Work area setup• Function, operation, standard programs• Interpreting error messages• Practical exercises:
- Setting up standard programs under production conditions
Seminar duration: 2 days
Target group: Set-up men, machine operators
Prerequisites: Basic knowledge of injection moulding machines, seminar EOB
ENGEL robotics basics (ERB)Basic skills for operating ENGEL viper linear robots
▼
Seminar objective:Advanced operating skills for the ENGEL viper robot systems. After the seminar, participants will be capable of programming ENGEL viper robot systems and also of quickly and effectively changing or adapting various sequences.
Seminar contents:• Work area setup • Sequence editor basics • Explanation of ENGEL standard sequences • Practical exercises:
- Creating various program sequences
Seminar duration: 3 days
Target group:Advanced operating staff: Set-up men, machine operators, mould proving staff, application technicians
Prerequisites:Good knowledge of ENGEL viper robots, seminar ERB
ENGEL robotics advanced (ERA)Operation of ENGEL viper linear robots for advanced users
▼
Seminar objective:Operating ENGEL easix KR robot systems. After the seminar, the participants will be familiar with the setup, coordinate systems, operation and programming of the six-axis robot. More com-plex program sequences can be created and changed based on this knowledge.
Seminar contents:• Build-up of the robot• Sequence editor• Coordinate systems• Practical exercises
Seminar duration: 2 days
Target group:Advanced operating staff, machine operators, mould proving staff, masters
Prerequisites:Good working knowledge of sequence program-ming, seminar ERA
ENGEL robotics six axis (ERS)Operating ENGEL easix KR robots
▼
![Page 7: ENGEL Training 2017-11 · PDF fileFast track learning! ... passing the exam, ... the ENGEL e-trainer provides a unique injection moulding machine simulation on a CD and has estab](https://reader031.vdocuments.us/reader031/viewer/2022021504/5a9dc6da7f8b9a0d5a8c028d/html5/thumbnails/7.jpg)
Training_1312_Training
ENGEL Maintenance
Seminar objective:The participants will understand the basic sequences in the injection moulding process. They will learn and understand the technical terms used in plastics engineering (mould protection, holding pressure, back pressure, etc.). They will be able to more easily assess the consequences of their actions. Target and actual values can be changed and checked for troubleshooting purposes. Maintenance staff can autonomously perform manual functions and run a dry cycle, in coordination with commissioning staff.
Seminar contents:• Basic knowledge of injection moulding technology• Layout and function of an injection moulding
machine• The injection moulding process and its technical
terms (mould protection, switchover point, etc.)• Layout, operation and setup of the ENGEL
control unit• Working with the injection moulding machine's
comprehensive help functions• Practical exercises:
- Basic injection moulding machine set up with trial injection
Seminar duration: 1 day
Target group: Maintenance and service staff in mechanical / electrical systems
Prerequisites: None
ENGEL operator maintenance (EOM)Operating ENGEL injection moulding machines for maintenance staff
▼
Maintenance
Seminar objective:Effective performance of maintenance tasks, and quick troubleshooting and error correction. After the seminar, participants will be familiar with the control elements and their functions, and with troubleshooting electrical system.
Seminar contents:• Reading of the electric schematic• Explanation of the electrical monitoring circuits• System components of the machine control
unit• Electronics modules, troubleshooting tools• Error messages and their elimination• Practical exercises:
- Troubleshooting - Replacing components - Loading software updates - Calibrating stroke transducers
Seminar duration: 2 days
Target group:Maintenance and repair staff for electrical and electronic systems
Prerequisites:Good working knowledge of electrical technology and machine operations, seminar EOM
ENGEL control basics (ECB)Basic knowledge of control technology and engi-neering for ENGEL injection moulding machines
▼
Seminar objective:Effective execution of maintenance work as well as quick recognition and elimination of malfunc-tions. After the seminar, the participant knows the open loop and closed loop control systems and masters the calibration and adjustment of the closed loop controls.
Seminar contents:• Function of the valves and pumps• EHV-Pump closed loop control• Heating closed loop control• Practical exercises:
- Adjusting the pump control - Optimising the heating control
Seminar duration: 1 day
Target group:Maintenance and repair staff for electrical and electronic systems
Prerequisites:Good working knowledge of electrical technolo-gy and machine operations, seminars EOM and ECB
ENGEL control victory (ECV)Control technology and engineering for ENGEL injection moulding machines up to a clamp force of 5000 kN - for advanced users
▼
Seminar objective:Seminar participants are familiar with the layout of the all-electric injection moulding machine and have mastered the drive functions, and sensor and electrical system. To increase machine avail-ability, participants can perform preventive main-tenance work on the machine and safety equip-ment.
Seminar contents:• System layout of the machine and drives• Replacing control components• Calibrating motors and sensors• Mechanical maintenance• Check of the safety equipment• Practical exercises
Seminar duration: 2 days
Target group:Maintenance and repair staff for electrical, electronic and mechanical systems
Prerequisites:Good working knowledge of electrical technolo-gy and machine operations, seminars EOM and ECB
ENGEL electrical machine (EEM)Control technology and engineering and maintenance for all-electric ENGEL injection moulding machines
▼
![Page 8: ENGEL Training 2017-11 · PDF fileFast track learning! ... passing the exam, ... the ENGEL e-trainer provides a unique injection moulding machine simulation on a CD and has estab](https://reader031.vdocuments.us/reader031/viewer/2022021504/5a9dc6da7f8b9a0d5a8c028d/html5/thumbnails/8.jpg)
Training_1514_Training
Seminar objective:Effective performance of maintenance tasks on ENGEL viper robot systems, and quick trouble-shooting and error correction. After the seminar, participants will be familiar with robot control ele-ments and their functions, and with troubleshoot-ing procedures.
Seminar contents:• System components• Control modules, drive calibration• Robot setup• Error messages and their elimination• Practical exercises:
- Adjusting and calibrating - Troubleshooting
Seminar duration: 2 days
Target group:Servicing and maintenance staff
Prerequisites:Good working knowledge of electrical technolo-gy and machine operations, seminars EOM and ECB
ENGEL robotics control (ERC)Control technology and maintenance of ENGEL viper linear robots
▼
Seminar objective:Participants will acquire basic hydraulics skills and prepare themselves for the EHA seminar. After the seminar, participants will be familiar with the functions of the individual hydraulics components on an ENGEL injection moulding machine.
Seminar contents:• Basics of the hydraulics• Function of individual hydraulic components• Practical exercises:
- Getting to know a machine's hydraulic system
Seminar duration: 1 day
Target group:Beginners, servicing and maintenance staff
Prerequisites:Good working knowledge of machine operations, seminar EOM
ENGEL hydraulic basics (EHB)Basic knowledge of hydraulic components on ENGEL injection moulding machines
▼
Seminar objective:Effective and quick recognition as well as elimination of hydraulic problems. After the seminar, the participants understands the hydraulic plant, its functional sequences and the troubleshooting
Seminar contents:• EHV hydraulics setup• Reading of hydraulic schematics• Component functions• Possible malfunctions in the hydraulic plant
and ´their elimination• Practical exercises:
- Troubleshooting - Adjustments on the machine
Seminar duration: 1 day
Target group:Servicing and maintenance staff
Prerequisites:Good working knowledge of hydraulic components and machine operations, seminars EOM and EHB
ENGEL hydraulic advanced (EHA)Hydraulic systems on ENGEL injection mould-ing machines up to a clamping force of 5000 kN for advanced users
▼
Seminar objective:Effective and quick identification and elimination of hydraulics problems on duo machines. After the seminar, the participants understands the hydraulic plant, its functional sequences and the troubleshooting
Seminar contents:• Hydraulic layout of a duo machine• Reading of hydraulic schematics• Component functions • Possible malfunctions in the hydraulic plant
and ´their elimination • Practical exercises:
- Troubleshooting - Adjustments on the machine
Seminar duration: 1 day
Target group:Servicing and maintenance staff
Prerequisites:Good working knowledge of hydraulic compo-nents and machine operations, seminars EOM and EHB
ENGEL hydraulic duo (EHD) Hydraulic systems on ENGEL duo injection moulding machines for advanced users
▼
Seminar objective:Effective and quick recognition and correction of problems at the ecodrive pump drive. After the seminar the participant will understand the hydraulic system, the corresponding servo drive technology, their function and troubleshooting.
Seminar contents:• Servohydraulics and servodrive technology
setup• Function of the corresponding components• Possible malfunctions and how to remedy
them• Practical exercises:
- Troubleshooting (oscilloscope) - Adjustments on the machine
Seminar duration: 1 day
Target group:Servicing and maintenance staff
Prerequisites:Good working knowledge of hydraulic components, electrical system and machine operation, seminars EOM, ECB and EHB
ENGEL ecodrive system (EES)Servohydraulic systems on ENGEL injection moulding machines
▼
Seminar objective:Execution of preventive work for increasing the machine availability. After the seminar the partic-ipant knows the mechanical components of the injection moulding machine, the regular mainte-nance of the machine and of the safety devices.
Seminar contents:• Mechanical and hydraulic maintenance• Error messages in connection with mainte-
nance• Check of the safety equipment• Optimisation of a heating closed loop control• Practical exercises:
- Mechanical and hydraulic maintenance work
Seminar duration: 1 day
Target group:Servicing and maintenance staff
Prerequisites:Good working knowledge of machine opera-tions, seminar EOM
ENGEL maintenance victory (EMV)ENGEL injection moulding machines up to a clamp force of 5000 kN
▼
![Page 9: ENGEL Training 2017-11 · PDF fileFast track learning! ... passing the exam, ... the ENGEL e-trainer provides a unique injection moulding machine simulation on a CD and has estab](https://reader031.vdocuments.us/reader031/viewer/2022021504/5a9dc6da7f8b9a0d5a8c028d/html5/thumbnails/9.jpg)
Training_1716_Training
ENGEL Process engineering
Seminar objective:This seminar gives newcomers to the industry and career changers the necessary tools to understand the injection moulding process. Besides theoretical explanations participants will receive an introduction to the world of plastics and injection moulding tech-nology based on practical exercises to prepare them thoroughly for work in plastics production.
Seminar contents:• Basic knowledge of plastics: Structure and properties• Fundamentals of the injection moulding technol-
ogy: Components and method of operation of an injection moulding machine
• The processing process: Plasticizing, injection, pressures, cooling phase
• Continuing fundamentals of plastics: Processing properties
• Continuing fundamentals of the injection mould-ing technology: Process setting, moulded part error
Seminar duration: 2 days
Target group: Persons foreign to the industry and outsiders in the plastics industry
Prerequisites: None
Technology plastic basics (TPB)Basic knowledge about plastics technology for injection moulders
▼
Process engineering
Seminar objective:To enable seminar participants to recognise and classify defects in injection moulded parts. They will be familiarised with the methods and steps required to rectify these defects.
Seminar contents:• Identifying and correcting surface and injec-
tion defects• Classification of defects• Physical causes and remedial steps• Practical exercises
Seminar duration: 2 days
Target group:Experienced operating staff, quality assurance staff, mould proving staff, supervisors
Prerequisites:Good working knowledge of plastics and injec-tion moulding technology, Seminar TPB and EOB
Technology plastic advanced (TPA)Identifying and correcting surface and injection errors
▼
Seminar objective:Imparting of the necessary steps to the optimum quality assurance during injection moulding. After the seminar the participant can carry out process and sequence optimisations independently under the aspects of the quality assurance. He masters the programs necessary for this purpose and understands the quality-relevant process data as well as their documentation.
Seminar contents:• Strategies for optimising the injection moulding
process• Moulded part properties, machine
optimisation and relevant process parameters• Optimisation using ENGEL micrograph,
ENGEL microplast and ENGEL iQ weight control
• Quality monitoring with ENGEL micrograph, process data graphics and process data protocols
• Practical exercises: - Optimisation and quality monitoring of an
injection moulding process with ENGEL programs
Seminar duration: 2 days
Target group:Supervisors, production managers, employees of the quality assurance, mould proving staff
Prerequisites:Good working knowledge of plastics and injection moulding technology, seminars TPB, EOB and EOA
Technology process and quality control (TPQ)Quality assurance at injection moulding
▼
Seminar objective:This seminar teaches the steps required to prepare moulds for production. Besides the fundamental mould data, the seminar focuses on finding and implementing the correct machine parameters depending on the mould and material deployed. The focus will be on process parameters and on optimising moulded part quality and the cycle time.
Seminar contents:• Necessary components and advance
information• Material and mould preparations• Finding the basic settings• Cycle and parts optimisation under
consideration of the parameter influences on the moulded part quality
Seminar duration: 2 days
Target group:Advanced operating staff: Set-up men, machine operators, mould proving staff, application technicians
Prerequisites:Good working knowledge of plastics and injection moulding technology, seminars TPB and EOB
Technology mould proving (TMP)Systematic mould trial and proving
▼
![Page 10: ENGEL Training 2017-11 · PDF fileFast track learning! ... passing the exam, ... the ENGEL e-trainer provides a unique injection moulding machine simulation on a CD and has estab](https://reader031.vdocuments.us/reader031/viewer/2022021504/5a9dc6da7f8b9a0d5a8c028d/html5/thumbnails/10.jpg)
Training_19
2007
Zertifizierungsstelle für Aus- und Weiterbildungsanbieter des Landes Niederösterreich
Donau-Universität Krems Dr.-Karl-Dorrek-Str. 30 3500 Krems
Tel.: +43(0)2732 893 – 2269 Tel.: +43 (0)2732 893 – 2268 [email protected]
ENGEL Austria GmbH Abteilung Trainingszentrum Dr. Wolfgang Maresch Ludwig Engel Straße 1 4311 Schwertberg 31.03.2010
Ihr Ansuchen um Zertifizierung vom 07. Jänner 2010 Sehr geehrter Herr Dr. Maresch, wir freuen uns Ihnen mitteilen zu dürfen, dass Ihre Unterlagen den Kriterien der Zertifizierungsagentur CERTNÖ entsprechen. Mit heutigem Datum erfüllt Ihr Institut die Voraussetzung für die Vergabe der NÖ Bildungsförderung und wird auf unseren Vorschlag vom Land Niederösterreich in die Liste anerkannter Bildungsträger aufgenommen. Bitte beachten Sie, dass in regelmäßigen Abständen stichprobenmäßige Audits durchgeführt werden, bei denen auch Ihr Unternehmen einer Prüfung unterzogen werden kann. Darüber hinaus sind etwaige Veränderungen innerhalb Ihres Unternehmens der Donau-Universität Krems/CERTNÖ unverzüglich mitzuteilen; andernfalls kann die Zertifizierung mit sofortiger Wirkung widerrufen werden. Mit besten Grüßen aus Krems, Dr.in Ulrike Kastler Leitung CERTNÖ Donau-Universität Krems
2009/2010 2009/2010
2011/2015 2014/2016
If the seminar schedule with details on registration is missing, please contact your ENGEL representative.
For detailed information of ENGEL training and to register for a seminar online, please visit:
www.engelglobal.com/training
2005: Initiative Prize for Vocational Training. ENGEL's e-trainer was accoladed as one of the seven most innovative training concepts by the Otto-Wolff Foundation and DIHK, Germany's Assembly of Chambers of Industry and Com-merce
2007 International German Training Prize Gold award for ENGEL's training philosophy from the BDVT (Berufsverband Deutscher Ver-kaufsförderer und Trainer e.V. - Professional Association of Sales Promoters and Trainers in Germany) in the face of competition from many other international training concepts.
2009 and 2010: ENGEL offers certified training. The high standard of training and quality established over many years was ex-amined by external auditors and certification bodies for adult education. The positive results: IBE and CERT certification in Austria (2009/10), AZWV certification in Germany (2009).
Since 2011: Worldwide roll-out of ENGEL Training Center certification. All ENGEL training centers are assessed and certified ac-cording to high uniform standards.*)
2014 and 2016: Ö-CERT certification of the ENGEL Austria GmbH training center ac-cording to Article 15a of the Austrian Fed-eral Constitutional Act.The Ö-CERT certification process created uni-form national quality standards for educational programs in Austria and as such is of pioneer-ing character in Europe.
*) This certification is performed every three years at the ENGEL Training Centers worldwide. E
NG
EL
train
ing.
An
exce
llent
co
ncep
t.
![Page 11: ENGEL Training 2017-11 · PDF fileFast track learning! ... passing the exam, ... the ENGEL e-trainer provides a unique injection moulding machine simulation on a CD and has estab](https://reader031.vdocuments.us/reader031/viewer/2022021504/5a9dc6da7f8b9a0d5a8c028d/html5/thumbnails/11.jpg)
EN 2
017-
11
ENGEL AUSTRIA GmbH | Ludwig-Engel-Straße 1 | 4311 Schwertberg, AustriaTel. +43 50 620 0 | Fax +43 50 620 3009 | [email protected] | www.engelglobal.com
The information, product features and pictures contained in this brochure are intended exclusively as a technical guide. ENGEL is not responsible for any technical changes or print/typographical errors . Reproduction in whole or in part is prohibited without the prior written consent of ENGEL AUSTRIA GmbH.