engel - shanghai plant extension
DESCRIPTION
Latest news from ENGEL Austria - Shanghai manufacturing plant extension Techspan Group New Zealand ENGEL agentsTRANSCRIPT
Press release
ENGEL AUSTRIA GmbH, A-4311 Schwertberg/Austria, Tel.: +43 50 620-0, Fax: +43 50 620-3009 E-mail: [email protected], http://www.engelglobal.com
1
ENGEL passes 100 million euro mark in Asia –
production capacity in Shanghai doubled
Shanghai/China – April 2012. In the fiscal year 201 1/2012, ENGEL AUSTRIA generated
sales of over € 100 million in Asia for the first t ime. With the expansion of production
capacities in Shanghai and South Korea, the injecti on moulding machine builder and
automation expert – based in Schwertberg/Austria – sees itself well equipped to
handle the anticipated increase in order volume fro m the region.
"The demand in Asia increasingly calls for an adaptation of the injection moulding
machines and system solutions to the specific requirements. Our decentralized, local
production facility enables us to offer our customers clear advantages with short delivery
times and realise a faster time to market," explained Dr. Peter Neumann, CEO of ENGEL
Holding, on 20 April at the opening ceremony of the considerably expanded production hall
at the ENGEL large-scale machine works in Shanghai.
To a large part, ENGEL attributes its record sales to its ongoing investments in the region
since the first Chinese subsidiary was founded in 1986. With meanwhile three sales and
service subsidiaries in China, further branches and agencies as well as two production
plants in Asia, ENGEL achieved a market share of almost 10 percent in the relevant Asian
market for the first time in the fiscal year 2011/2012. "In the fast-growing market segment
of medium and large injection moulding machines, ENGEL is now one of the leading
vendors in the region," says Dr. Neumann.
Opening ceremony in Shanghai
The large-scale machines built in Shanghai, together with the small and medium-sized
injection moulding machines from the production facility in South Korea and exports to Asia
from Austrian plants, have contributed to total sales of € 125 million. In order to be better
prepared to handle the increasing volume of orders in the region, ENGEL has doubled the
Press release
ENGEL AUSTRIA GmbH, A-4311 Schwertberg/Austria, Tel.: +43 50 620-0, Fax: +43 50 620-3009 E-mail: [email protected], http://www.engelglobal.com
2
capacity of its large-scale machine works in Shanghai. In the future, more than 200
machines of the ENGEL duo series will leave the plant each year. Construction work at the
Xinzhuang Industrial Park was completed by the start of the Chinaplas 2012 Trade Fair.
International customers, partners and representatives of the press were invited to the plant
on the third day of the trade fair to gain a first-hand impression of the high quality of
production and systems solution competence of the Austrian injection moulding machine
manufacturer. "Over the past few years, we have seen significantly higher demands placed
on plastic parts made in China," explained Gero Willmeroth, Sales and Service Manager at
ENGEL MACHINERY (SHANGHAI) Co., Ltd. "There is a call for even more sophisticated
solutions, which enhance productivity and efficiency in production. Turnkey systems
including automation from one source are gaining importance, as well as solutions for
process integration and energy-saving options."
Expansion also in South Korea – intensified market efforts in South-East Asia
ENGEL has invested 12 million in the extension of the Shanghai plant. A further € 8 million
are being invested in the expansion of the production facility for small and medium-sized
injection moulding machines in Pyungtaek City, South Korea, which is due for completion in
spring 2013. The plant's present output of 650 injection moulding machines is to be
increased to about 1100 units.
Besides China – Asia's largest market – the demand is also increasing in South-East Asia
and India. For the South-East Asian countries, ENGEL is further expanding its sales office in
Bangkok/Thailand and intensifying its market activities particularly in Indonesia and Thailand.
€ 800 million milestone achieved in worldwide sales
In the fiscal year 2011/12, the ENGEL Group generated global sales of over € 800 million for
the first time in the company's history. Whereas revenues amounted to only € 358 million in
the crisis year 2009/2010, the sales volume rose in the next fiscal year by 72% to € 615
million, now followed by a further 33% increase to € 834 million. The considerable success in
Press release
ENGEL AUSTRIA GmbH, A-4311 Schwertberg/Austria, Tel.: +43 50 620-0, Fax: +43 50 620-3009 E-mail: [email protected], http://www.engelglobal.com
3
Asia has made a significant contribution to this growth in revenue. A further reason is the
successful launch of the energy-saving ENGEL ecodrive option which has boosted the
market share of tie-bar-less injection moulding machines and of big two-platen machines.
Today, half of the hydraulic injection moulding machines delivered worldwide are equipped
with the servohydraulic ecodrive which – depending on the machine type and application –
enables energy savings of between 30 and 70%. In addition, this growth is driven by the
bundling business, in particular with the automotive industry and the significantly increased
demand for all-electric ENGEL e-motion injection moulding machines.
Further boost to automation technology
In the past fiscal year, the ENGEL Group was able to strengthen its global presence in
automation technology. Every second manufacturing cell realised in Europe by an injection
moulding machine builder is now delivered by ENGEL. In the process, ENGEL consistently
focuses on integration. The ENGEL viper linear robot series and the new ENGEL easix multi-
axis robot are both fully integrated into the control system of the injection moulding machine,
simplifying operation and programming and boosting efficiency and availability of the plants.
ENGEL stands worldwide for system competency, technological leadership and application-
oriented innovation. In 2011, the global plastics markets called for innovations as never
before, ranging from solutions in lightweight construction and flexible multi-component
applications to the breakthrough of all-electric injection moulding machines in the packaging
industry. The machine manufacturers are increasingly in demand as innovation partners – a
principle that ENGEL has been implementing over many years for its customers in the
international markets.
Press release
ENGEL AUSTRIA GmbH, A-4311 Schwertberg/Austria, Tel.: +43 50 620-0, Fax: +43 50 620-3009 E-mail: [email protected], http://www.engelglobal.com
4
To a large part, ENGEL attributes its record sales in Asia to its ongoing investments in the region. In Shanghai ENGEL now has doubled the capacity of its large-scale machine works.
In the future, more than 200 machines of the ENGEL duo series will leave the plant each year.
Press release
ENGEL AUSTRIA GmbH, A-4311 Schwertberg/Austria, Tel.: +43 50 620-0, Fax: +43 50 620-3009 E-mail: [email protected], http://www.engelglobal.com
5
Welcome at ENGEL Shanghai: International customers and partners were invited to the plant to gain a first-hand impression of the high quality of production and systems solution competence.
Opening ceremony: Peter Garimort, General Manager ENGEL Machinery Shanghai, Michael Heinz, Austrian Consul General, Dr. Birgitte Engleder, Chairman of the ENGEL board of directors, Dr. Peter Neumann, CEO ENGEL Holding, Chen Jianping, Vice General Manager Shanghai Xinzhuang Industrial Park, Gero Willmeroth, President Sales and Service, ENGEL Machinery Shanghai (from left to right). Pictures: ENGEL
Press release
ENGEL AUSTRIA GmbH, A-4311 Schwertberg/Austria, Tel.: +43 50 620-0, Fax: +43 50 620-3009 E-mail: [email protected], http://www.engelglobal.com
6
ENGEL AUSTRIA GmbH ENGEL is one of the global leaders in the manufacture of plastics processing machines. Today, the ENGEL Group offers a full range of technology modules for plastics processing as a single source supplier: Injection moulding machines for thermoplastics and elastomers, and automation, with the assurance that individual components are also competitive and successful in the world markets. With eight production plants in Europe, North America and Asia (China, Korea), subsidiaries and representatives in over 85 countries, ENGEL offers its customers the optimal global support they need to compete and succeed with new technologies and leading-edge production systems.
Contact for journalists:
Gerd Liebig, Group Marketing Director, ENGEL AUSTRIA GmbH, Ludwig-Engel-Strasse 1, A-4311 Schwertberg/Austria, Tel.: +43 (0)50 / 620-3800, Fax: -3009 E-mail: [email protected] Susanne Zinckgraf, Manager Public Relations, ENGEL AUSTRIA GmbH, Ludwig-Engel-Strasse 1, A-4311 Schwertberg/Austria, PR Office: Theodor-Heuss-Str. 85, D-67435 Neustadt/Germany, Tel.: +49 (0) 6327 9769902 E-mail: [email protected]