eng sk500lc final lowres 20161209 - interempresas
TRANSCRIPT
SK500LC-10
Inquiries To:
Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines with speci�cations that di�er from those of machines sold in your areas. Please consult your nearest KOBELCO distributor for those items you require. Specialist equipment is needed to use this machine in demolition work. Before using it please contact your KOBELCO dealer. Due to our policy of continuous product improvements all designs and speci�cations are subject to change without advance notice.Copyright by No part of this catalog may be reproduced in any manner without notice.
Note: Standard and optional equipment may vary. Consult your KOBELCO dealer for speci�cs.
STANDARD EQUIPMENTENGINE Engine, HINO P11C-VN, diesel engine with turbocharger and intercooler Automatic engine deceleration Auto Idle Stop (AIS) Batteries (2 x 12V - 176Ah) Starting motor (24V - 5 kW), 60 amp alternator Automatic engine shut-down for low engine oil pressure Engine oil pan drain cock Double element air cleaner Refueling pump
CONTROL Working mode selector (H-mode, S-mode and ECO-mode) Power Boost Heavy lift Object Handling Kit (boom and arm safety valve + hook) without ME ver. Extra N&B piping (proportional hand control) without ME ver.
SWING SYSTEM & TRAVEL SYSTEM Swing rebound prevention system Straight propel system Two-speed travel with automatic shift down Sealed & lubricated track links Grease-type track adjusters Automatic swing brake
HYDRAULIC Arm regeneration system Auto warm up system Aluminum hydraulic oil cooler Hydraulic �uid �lter clog detector Quick hitch piping (without ME ver.)
MIRRORS, LIGHTS & CAMERAS Rearview mirror Three front working lights Rear & right side camera
CAB & CONTROL Two control levers, pilot-operated Horn, electric Cab light (interior) Luggage tray Large cup holder Detachable two-piece �oor mat Headrest Handrails Intermittent windshield wiper with double-spray washer Skylight Tinted safety glass Pull-up type front window and removable lower front window Easy-to-read multi-display color monitor Automatic air conditioner Emergency escape hammer Air suspension seat with heater Radio, AM/FM stereo with speaker USB pin TOP guard (ISO 10262:1998) Remote machine monitoring system “KOMEXS” Tow eyes
ME speci�cation Various optional arms Wide range of shoes Additional track guide Two cab lights Mechanical suspension seat (Optional for N&B piping speci�cation) Rain visor (may interfere with bucket action)
Cab guard Quick hitch piping (ME ver.) Travel alarm Lower Under Cover Hydraulic pressure adjustment function for N&B piping Object Handling Kit (boom and arm safety valve + hook) (ME ver.)
OPTIONAL EQUIPMENT
1.4 - 3.4 m3
49,900 kg - 52,800 kg
271 kW / 1,850 min-1
Bucket Capacity:
Engine Power:
Operating Weight:
Veluwezoom 151327 AE AlmereThe Netherlandswww.kobelco-europe.com
KOBELCO CONSTRUCTION MACHINERY EUROPE B.V.
December 2016 | POD032
1 2
productivityIncrease in
means“Power”
Higher fuele�ciency
means“E�ciency”
* NOx: Nitrogen Oxide
Power Meets E�ciency
To urban centers, and to mines around the world. Kobelco’s all-out
innovation brings you durable earth-friendly construction machinery that’s
equal to any task, at sites all over the planet. Increased power and even
greater fuel economy bring higher e�ciency to any project. Kobelco
SK500LC machines are also more durable than ever, able to withstand the
rigors of the toughest job sites. It all adds up to new levels of value that are a
step ahead of the times. Also, this machine conforms to Stage IV Exhaust
Emission Standards, thanks to its signi�cantly reduced NOx* emissions.
While focusing on the global environment of the future, Kobelco o�ers
next-generation productivity to meet the need for lower life cycle costs and
exceed the expectations of customers the world over.
1 2
productivityIncrease in
means“Power”
Higher fuele�ciency
means“E�ciency”
* NOx: Nitrogen Oxide
Power Meets E�ciency
To urban centers, and to mines around the world. Kobelco’s all-out
innovation brings you durable earth-friendly construction machinery that’s
equal to any task, at sites all over the planet. Increased power and even
greater fuel economy bring higher e�ciency to any project. Kobelco
SK500LC machines are also more durable than ever, able to withstand the
rigors of the toughest job sites. It all adds up to new levels of value that are a
step ahead of the times. Also, this machine conforms to Stage IV Exhaust
Emission Standards, thanks to its signi�cantly reduced NOx* emissions.
While focusing on the global environment of the future, Kobelco o�ers
next-generation productivity to meet the need for lower life cycle costs and
exceed the expectations of customers the world over.
Arm Inter�ow SystemWhen lowering the boom, this system uses the downward force generated by the boom’s weight to push �uid to the shovel arm. This greatly reduces the need to apply power from outside the system.
Hydraulic Circuit Reduces Energy LossWe have made every e�ort to enhance fuel e�ciency by minimizing hydraulic pressure resistance, improving the hydraulic line layout to control friction resistance loss and minimizing valve resistance.
Evolution Continues, with Improved Fuel E�ciency
The boom weight puts force on the boom cylinder
Boom weight
1
2
4
3
Hydraulic �uid pushed from the boom cylinder goes to the arm cylinder
Arm cylinder contracts Arm opens
Improved hydraulic piping is an e�ective means of reducing pressure loss.
Larger hydraulic piping Smoother hydraulic piping Low-resistance connections
In Pursuit of Improved Fuel E�ciency
Conforms to Tier IV Final exhaust emissions standards
Built to operate in tough working environmentHydraulic System: Revolutionary Technology Saves Fuel
VG Turbo Reduces PMThe variable-geometry turbocharger adjusts air intake to maximize combustion e�ciency. At low engine speeds the nozzles are closed, the turbo speed increased and air intake is boosted. This helps lower fuel consumption.
EGR Cooler Reduces NOxCooled exhaust gases from the EGR cooler are mixed with fresh air in the intake. The recirculated air lowers the combustion temperature which reduces NOx.
SCR System with DEF/UreaEngine exhaust system utilizes Selective Catalytic Reduction (SCR) to convert NOx* into harmless nitrogen and water emissions. SCR combined with a Diesel Particulate Filter (DPF) makes a much cleaner machine meeting U.S. EPA regulations for Tier IV �nal.
* SCR: Selective Catalytic Reduction
AIS (Auto Idle Stop)If the boarding/disembarking lever is left up, the engine will stop automatically.This eliminates wasteful idling during standby, saving fuel and reducing CO2 emissions as well.
4 sec
Pull up safety lock lever
Engine stops
Engine deceleration
Alarm
55 sec
60 sec Elapsed time
Variable nozzle
At low-speed At high-speed
Air intake Exhaust
Water-cooled EGR
Elec
tron
ic c
ontr
ol
EGR
valv
e
3 4
The new arm inter�ow system more e�ciently
controls hydraulic �uid �ow, and signi�cant
reduction of in-line resistance and pressure loss
boosts fuel e�ciency.
The engine, already well-known for its
environmental performance has a new SCR* system,
and its reduced NOx emissions means the engine
now meets Stage IV Standards.
1 2 3 4
Engi
ne rp
m
Reduces Fuel Consumption and Minimizes Exhaust Emissions Hino engines are renowned for fuel e�ciency and environmental performance, and KOBELCO has tuned them speci�cally for construction machinery. The high-pressure common rail fuel injection system, the variable-geometry (VG) turbocharger, and the exhaust gas recirculation (EGR) system reduce particulate matter (PM) while the large EGR cooler greatly reduces the formation of nitrogen oxide (NOx) gases.
NEW
NEW
Higher fuele�ciency
means“E�ciency”
NOx
SCR catalyst
*80% cleaner than Tier IV interim
Hydraulic Drive for Engine Cooling Fan;Independent Oil Cooler FanHydraulic drive optimizes the cooling fan rotation speed to improve fuel economy and reduce noise. Also, the independent oil cooler fan better matches cooling to the hydraulic oil temperature, for optimal oil temperature control.
NEW
ECO-mode•••About 6% improvement
ECO-mode (SK500LC-10)•••About 36% improvement
Compared to previous models
ECO-mode further reduces fuel consumption
Operation ModeFuel consumption is lower in ECO-mode in comparison with the previous model (Generation 9).
Always and Forever. Yesterday, Today, and Tomorrow.Obsessed with Fuel E�ciency.
Compared to SK480LC-6 model (2006)
Over the past 10 years, Kobelco has achieved an average reduction of about 36 % in fuel consumption. And we vow to continue to lead in fuel e�ciency.
Arm Inter�ow SystemWhen lowering the boom, this system uses the downward force generated by the boom’s weight to push �uid to the shovel arm. This greatly reduces the need to apply power from outside the system.
Hydraulic Circuit Reduces Energy LossWe have made every e�ort to enhance fuel e�ciency by minimizing hydraulic pressure resistance, improving the hydraulic line layout to control friction resistance loss and minimizing valve resistance.
Evolution Continues, with Improved Fuel E�ciency
The boom weight puts force on the boom cylinder
Boom weight
1
2
4
3
Hydraulic �uid pushed from the boom cylinder goes to the arm cylinder
Arm cylinder contracts Arm opens
Improved hydraulic piping is an e�ective means of reducing pressure loss.
Larger hydraulic piping Smoother hydraulic piping Low-resistance connections
In Pursuit of Improved Fuel E�ciency
Conforms to Tier IV Final exhaust emissions standards
Built to operate in tough working environmentHydraulic System: Revolutionary Technology Saves Fuel
VG Turbo Reduces PMThe variable-geometry turbocharger adjusts air intake to maximize combustion e�ciency. At low engine speeds the nozzles are closed, the turbo speed increased and air intake is boosted. This helps lower fuel consumption.
EGR Cooler Reduces NOxCooled exhaust gases from the EGR cooler are mixed with fresh air in the intake. The recirculated air lowers the combustion temperature which reduces NOx.
SCR System with DEF/UreaEngine exhaust system utilizes Selective Catalytic Reduction (SCR) to convert NOx* into harmless nitrogen and water emissions. SCR combined with a Diesel Particulate Filter (DPF) makes a much cleaner machine meeting U.S. EPA regulations for Tier IV �nal.
* SCR: Selective Catalytic Reduction
AIS (Auto Idle Stop)If the boarding/disembarking lever is left up, the engine will stop automatically.This eliminates wasteful idling during standby, saving fuel and reducing CO2 emissions as well.
4 sec
Pull up safety lock lever
Engine stops
Engine deceleration
Alarm
55 sec
60 sec Elapsed time
Variable nozzle
At low-speed At high-speed
Air intake Exhaust
Water-cooled EGR
Elec
tron
ic c
ontr
ol
EGR
valv
e
3 4
The new arm inter�ow system more e�ciently
controls hydraulic �uid �ow, and signi�cant
reduction of in-line resistance and pressure loss
boosts fuel e�ciency.
The engine, already well-known for its
environmental performance has a new SCR* system,
and its reduced NOx emissions means the engine
now meets Stage IV Standards.
1 2 3 4
Engi
ne rp
m
Reduces Fuel Consumption and Minimizes Exhaust Emissions Hino engines are renowned for fuel e�ciency and environmental performance, and KOBELCO has tuned them speci�cally for construction machinery. The high-pressure common rail fuel injection system, the variable-geometry (VG) turbocharger, and the exhaust gas recirculation (EGR) system reduce particulate matter (PM) while the large EGR cooler greatly reduces the formation of nitrogen oxide (NOx) gases.
NEW
NEW
Higher fuele�ciency
means“E�ciency”
NOx
SCR catalyst
*80% cleaner than Tier IV interim
Hydraulic Drive for Engine Cooling Fan;Independent Oil Cooler FanHydraulic drive optimizes the cooling fan rotation speed to improve fuel economy and reduce noise. Also, the independent oil cooler fan better matches cooling to the hydraulic oil temperature, for optimal oil temperature control.
NEW
ECO-mode•••About 6% improvement
ECO-mode (SK500LC-10)•••About 36% improvement
Compared to previous models
ECO-mode further reduces fuel consumption
Operation ModeFuel consumption is lower in ECO-mode in comparison with the previous model (Generation 9).
Always and Forever. Yesterday, Today, and Tomorrow.Obsessed with Fuel E�ciency.
Compared to SK480LC-6 model (2006)
Over the past 10 years, Kobelco has achieved an average reduction of about 36 % in fuel consumption. And we vow to continue to lead in fuel e�ciency.
Improved excavating load
Digging Volume
Digging volume/hour Max. Bucket Digging Force
Normal: 267 kN With Power Boost: 292 kN
Max. Arm Crowding Force
Normal: 203 kN With Power Boost: 222 kN
(Compared to H-mode on previous models)
This excavator o�ers dynamic digging force even as it minimizes fuel consumption rates, achieving class-leading work volume. H-mode, sometimes with an increased torque setting, delivers about 13% greater digging volume.
Improved fuel e�ciency contributes to high performance
About 13 % increase
A quick hitch hydraulic line, which speeds up attachment changes, is available as a standard, it is optional on ME ver.
Piping for Quick Hitch (optional)
Double Grouser Shoe(optional)
A Light Touch on the Lever Means Smoother, Less Tiring Work
2
4
5 6
3
1
More Power and Higher E�ciency
It takes 25%* less e�ort to work the operation lever, which reduces fatigue over long working hours or continued operations.
Multi-Display in ColorBrilliant colors and graphic displays are easy to recognize on the LCD multi-display in the console. The display shows fuel consumption, maintenance intervals, and more.
One-Touch Attachment Mode SwitchA simple �ick of a switch converts the hydraulic circuit and �ow amount to match attachment changes. Icons help the operator to con�rm the proper con�guration at a glance.
MaintenanceFuel consumptionPM accumulation/Urea accumulation display
Nibbler modeBreaker mode
Top Class Traveling ForcePowerful traveling force and pulling force deliver plenty of speed when climbing slopes or negotiating bad roads, and the agility to change direction swiftly and smoothly.
Max. digging reach
Max. digging depth
Max. vertical wall digging depth
12,070 mm
7,810 mm
7,120 mm
Top-class excavating reach extends working range
Get More Done Faster with Superior Operability
Operator-friendly Features Include Controls that Are Easy to See, Easy to Use
Drawbar Pulling Force: 415kN
5 6
Values are for HD arm (3.45 m)
The highly e�cient hydraulic system minimizes fuel consumption while maximizing power. With nimble movement and ample digging power, this excavator promises to improve your job productivity.
1
2
3
4
5
6
Analog gauge provides an intuitive reading of fuel level and engine water temperature
Green indicator light shows low fuel consumption during operation
PM accumulation display (left)/Urea level gauge (right)
Fuel consumption/Switch indicator for rear camera images
Digging mode switch
Monitor display switch
NEW
*Compared to SK500LC-9
Double grouser shoes are available as an option.
MVLCCrawler length can be adjusted by �xing bolt positions to comply with transport regulations.
S-mode ••• About 8% improvement
H-mode••• About 13% improvement
Improved excavating load
Digging Volume
Digging volume/hour Max. Bucket Digging Force
Normal: 267 kN With Power Boost: 292 kN
Max. Arm Crowding Force
Normal: 203 kN With Power Boost: 222 kN
(Compared to H-mode on previous models)
This excavator o�ers dynamic digging force even as it minimizes fuel consumption rates, achieving class-leading work volume. H-mode, sometimes with an increased torque setting, delivers about 13% greater digging volume.
Improved fuel e�ciency contributes to high performance
About 13 % increase
A quick hitch hydraulic line, which speeds up attachment changes, is available as a standard, it is optional on ME ver.
Piping for Quick Hitch (optional)
Double Grouser Shoe(optional)
A Light Touch on the Lever Means Smoother, Less Tiring Work
2
4
5 6
3
1
More Power and Higher E�ciency
It takes 25%* less e�ort to work the operation lever, which reduces fatigue over long working hours or continued operations.
Multi-Display in ColorBrilliant colors and graphic displays are easy to recognize on the LCD multi-display in the console. The display shows fuel consumption, maintenance intervals, and more.
One-Touch Attachment Mode SwitchA simple �ick of a switch converts the hydraulic circuit and �ow amount to match attachment changes. Icons help the operator to con�rm the proper con�guration at a glance.
MaintenanceFuel consumptionPM accumulation/Urea accumulation display
Nibbler modeBreaker mode
Top Class Traveling ForcePowerful traveling force and pulling force deliver plenty of speed when climbing slopes or negotiating bad roads, and the agility to change direction swiftly and smoothly.
Max. digging reach
Max. digging depth
Max. vertical wall digging depth
12,070 mm
7,810 mm
7,120 mm
Top-class excavating reach extends working range
Get More Done Faster with Superior Operability
Operator-friendly Features Include Controls that Are Easy to See, Easy to Use
Drawbar Pulling Force: 415kN
5 6
Values are for HD arm (3.45 m)
The highly e�cient hydraulic system minimizes fuel consumption while maximizing power. With nimble movement and ample digging power, this excavator promises to improve your job productivity.
1
2
3
4
5
6
Analog gauge provides an intuitive reading of fuel level and engine water temperature
Green indicator light shows low fuel consumption during operation
PM accumulation display (left)/Urea level gauge (right)
Fuel consumption/Switch indicator for rear camera images
Digging mode switch
Monitor display switch
NEW
*Compared to SK500LC-9
Double grouser shoes are available as an option.
MVLCCrawler length can be adjusted by �xing bolt positions to comply with transport regulations.
S-mode ••• About 8% improvement
H-mode••• About 13% improvement
Double-Element Air Cleaner The large-capacity element features a double-�lter structure that keeps the engine running clean even in industrial environments.
Increased Filtering Capacity for Hydraulic OilTwo �lters are installed for returning hydraulic oil, to curb clogging and increase the durability and reliability of the hydraulic equipment.Filtering capacity 1.8 times greater than previous model (Generation-9).
Pump Drain Filter Newly installed pump drain �lter boosts pump reliability.
Pilot Filter A new cartridge-type pilot �lter simpli�es maintenance.
Fuel FilterThe pre-�lter, with built-in water separator maximizes �ltering performance.
Structural design increases strength, while
eliminating hydraulic problems. Enhanced
durability takes productivity to a new level.
Improved Filtration System Reliability
NEW NEW
NEW NEW
NEW
Clean, contaminant-free fuel and hydraulic �uid are essential to stable performance. The improved �ltration systems reduce
the risk of mechanical trouble and enhance longevity and durability.
Increased Power,with Enhanced Durabilityto Maintain theMachine's Value
Hydraulic Fluid Filter Clog DetectorPressure sensors at the inlet and outlet of the hydraulic �uid �lter monitor di�erences in pressure to determine the degree of clogging If the di�erence in pressure exceeds a predetermined level, a warning appears on the multi-display, so any contamination can be removed from the �lter before it reaches the hydraulic �uid reservoir.
productivityIncrease in
means“Power”
Larger-size Return
Fuel tank
EngineMain �lter
Pre-�lter
Hydraulic �uid �lterHydraulic �uid reservoir
Pressuredetection system
Pressuredetection system
7 8
Hydraulic Fluid FilterRecognized as the best in the industry, our super-�ne �lter separates out even the smallest particles. New cover prevents contamination when changing �lters.
Double-Element Air Cleaner The large-capacity element features a double-�lter structure that keeps the engine running clean even in industrial environments.
Increased Filtering Capacity for Hydraulic OilTwo �lters are installed for returning hydraulic oil, to curb clogging and increase the durability and reliability of the hydraulic equipment.Filtering capacity 1.8 times greater than previous model (Generation-9).
Pump Drain Filter Newly installed pump drain �lter boosts pump reliability.
Pilot Filter A new cartridge-type pilot �lter simpli�es maintenance.
Fuel FilterThe pre-�lter, with built-in water separator maximizes �ltering performance.
Structural design increases strength, while
eliminating hydraulic problems. Enhanced
durability takes productivity to a new level.
Improved Filtration System Reliability
NEW NEW
NEW NEW
NEW
Clean, contaminant-free fuel and hydraulic �uid are essential to stable performance. The improved �ltration systems reduce
the risk of mechanical trouble and enhance longevity and durability.
Increased Power,with Enhanced Durabilityto Maintain theMachine's Value
Hydraulic Fluid Filter Clog DetectorPressure sensors at the inlet and outlet of the hydraulic �uid �lter monitor di�erences in pressure to determine the degree of clogging If the di�erence in pressure exceeds a predetermined level, a warning appears on the multi-display, so any contamination can be removed from the �lter before it reaches the hydraulic �uid reservoir.
productivityIncrease in
means“Power”
Larger-size Return
Fuel tank
EngineMain �lter
Pre-�lter
Hydraulic �uid �lterHydraulic �uid reservoir
Pressuredetection system
Pressuredetection system
7 8
Hydraulic Fluid FilterRecognized as the best in the industry, our super-�ne �lter separates out even the smallest particles. New cover prevents contamination when changing �lters.
Hammer for emergency exit
TOP Guard is �tted as standard.
Comfortable Cab Is Now Safer than Ever
NEW
Seat recliner can be pushed back �at Double slides allow adjustment for optimum comfort
Bluetooth installed AM/FM stereo radio
Spacious storage tray
Seat suspension absorbs vibration
Large cup holder
Comfort
USB pin/24V power outlet
Safety
Expanded Field of View for Greater Safety
Interior Equipment Adds to Comfort and Convenience
More Comfortable Seat Means Higher ProductivitySuper-Airtight CabAir Conditioner Register behind the Seat
Quiet Inside
The high level of air-tightness keeps dust out of the cab.
The high level of air-tightness ensures a quiet, comfortable cabin interior.
The large air-conditioner has registers on the back pillars that blow from behind and to the right and left of the operator’s seat. They can be adjusted to put a direct �ow of cool/warm air on the operator, which means a more comfortable operating environment.
Rear view
Low VibrationCoil springs absorb small vibrations, and high suspension mounts �lled with silicone oil reduce heavy vibration. The long stroke achieved by this system provides excellent protection from vibration.
ROPS CabROPS (Roll-Over-Protective Structure)-compliant cab clears ISO standards (ISO-12117-2: 2008) and ensures greater safety for the operator should the machine tip over.
Broad View Liberates the OperatorThe front window features one large piece of glass without a center pillar on the right side for a wide, unobstructed view.
Right Side Camera Fitted as StandardIn addition to the existing rear-view camera, a camera for the right side is �tted as standard for easy safety checks all around the machine.
Rear view shows the area directly behind the cab.
Twice the stroke of a conventional mount
Coil spring
Silicone oil
9 10
A work environment that is quieter and
more comfortable. A cab that puts the
operator �rst is key to improved safety.
Large Cab Is Easy to Get In and Out ofThe expanded cab provides plenty of room for a large door, more headroom and smoother entry and exit.
Rear view camera Right side view camera
Hammer for emergency exit
TOP Guard is �tted as standard.
Comfortable Cab Is Now Safer than Ever
NEW
Seat recliner can be pushed back �at Double slides allow adjustment for optimum comfort
Bluetooth installed AM/FM stereo radio
Spacious storage tray
Seat suspension absorbs vibration
Large cup holder
Comfort
USB pin/24V power outlet
Safety
Expanded Field of View for Greater Safety
Interior Equipment Adds to Comfort and Convenience
More Comfortable Seat Means Higher ProductivitySuper-Airtight CabAir Conditioner Register behind the Seat
Quiet Inside
The high level of air-tightness keeps dust out of the cab.
The high level of air-tightness ensures a quiet, comfortable cabin interior.
The large air-conditioner has registers on the back pillars that blow from behind and to the right and left of the operator’s seat. They can be adjusted to put a direct �ow of cool/warm air on the operator, which means a more comfortable operating environment.
Rear view
Low VibrationCoil springs absorb small vibrations, and high suspension mounts �lled with silicone oil reduce heavy vibration. The long stroke achieved by this system provides excellent protection from vibration.
ROPS CabROPS (Roll-Over-Protective Structure)-compliant cab clears ISO standards (ISO-12117-2: 2008) and ensures greater safety for the operator should the machine tip over.
Broad View Liberates the OperatorThe front window features one large piece of glass without a center pillar on the right side for a wide, unobstructed view.
Right Side Camera Fitted as StandardIn addition to the existing rear-view camera, a camera for the right side is �tted as standard for easy safety checks all around the machine.
Rear view shows the area directly behind the cab.
Twice the stroke of a conventional mount
Coil spring
Silicone oil
9 10
A work environment that is quieter and
more comfortable. A cab that puts the
operator �rst is key to improved safety.
Large Cab Is Easy to Get In and Out ofThe expanded cab provides plenty of room for a large door, more headroom and smoother entry and exit.
Rear view camera Right side view camera
Web server
Hydraulic excavator
KOBELCO service personnel/dealer/customer
Base station Digging Hrs Trveling Hrs Idle Hrs
Opt Att Hrs Cane Mode Hrs Ave,Fuel Consumption
Direct Access to Operational Status
Maintenance Data and Warning Alerts
KOMEXS (Kobelco Monitoring Excavator System) uses satellite communication and internet to relay data, and therefore can be deployed in areas where other forms of communication are di�cult. When a hydraulic excavator is �tted with this system, data on the machine’s operation, such as operating hours, location, fuel consumption, and maintenance status can be obtained remotely.
Remote Monitoring for Peace of Mind
GPS
Customer KOBELCO o�ce KOBELCO service personnel
Security SystemLocation DataAccurate location data can be obtained even from sites where communications are di�cult.
Latest location Location records Work data
Daily report
Alarm messages can be received on mobile device.
Fuel consumption
Area Alarm It can be set an alarm if the machine is moved out of its designated area to another location.
Engine Start Alarm The system can be set an alarm if the machine is operated outside designated time.
Engine start alarm outside prescribed work time
Operating Hours• A comparison of operating times of machines at multiple locations shows which locations are busier and more pro�table.• Operating hours on site can be accurately recorded, for running time calculations needed for rental machines, etc.
Machine Maintenance Data• Provides maintenance status of separate machines operating at multiple sites.• Maintenance data is also relayed to KOBELCO service personnel, for more e�cient planning of periodic servicing.
Warning AlertsThis system warns an alert if an anomaly is sensed, preventing damage that could result in machine downtime.
Alarm Information Can Be Received through E-mail Alarm information or maintenance notice can be received through E-mail, using a computer or cell phone.
Daily/Monthly ReportsOperational data downloaded onto a computer helps in formulating daily and monthly reports.
Fuel Consumption DataData on fuel consumption and idling times can be used to indicate improvements in fuel consumption.
Graph of Work ContentThe graph shows how working hours are divided among di�erent operating categories, including digging, idling, traveling and optional operations.
Maintenance
Alarm for outside of reset area
11 12
Work status
Web server
Hydraulic excavator
KOBELCO service personnel/dealer/customer
Base station Digging Hrs Trveling Hrs Idle Hrs
Opt Att Hrs Cane Mode Hrs Ave,Fuel Consumption
Direct Access to Operational Status
Maintenance Data and Warning Alerts
KOMEXS (Kobelco Monitoring Excavator System) uses satellite communication and internet to relay data, and therefore can be deployed in areas where other forms of communication are di�cult. When a hydraulic excavator is �tted with this system, data on the machine’s operation, such as operating hours, location, fuel consumption, and maintenance status can be obtained remotely.
Remote Monitoring for Peace of Mind
GPS
Customer KOBELCO o�ce KOBELCO service personnel
Security SystemLocation DataAccurate location data can be obtained even from sites where communications are di�cult.
Latest location Location records Work data
Daily report
Alarm messages can be received on mobile device.
Fuel consumption
Area Alarm It can be set an alarm if the machine is moved out of its designated area to another location.
Engine Start Alarm The system can be set an alarm if the machine is operated outside designated time.
Engine start alarm outside prescribed work time
Operating Hours• A comparison of operating times of machines at multiple locations shows which locations are busier and more pro�table.• Operating hours on site can be accurately recorded, for running time calculations needed for rental machines, etc.
Machine Maintenance Data• Provides maintenance status of separate machines operating at multiple sites.• Maintenance data is also relayed to KOBELCO service personnel, for more e�cient planning of periodic servicing.
Warning AlertsThis system warns an alert if an anomaly is sensed, preventing damage that could result in machine downtime.
Alarm Information Can Be Received through E-mail Alarm information or maintenance notice can be received through E-mail, using a computer or cell phone.
Daily/Monthly ReportsOperational data downloaded onto a computer helps in formulating daily and monthly reports.
Fuel Consumption DataData on fuel consumption and idling times can be used to indicate improvements in fuel consumption.
Graph of Work ContentThe graph shows how working hours are divided among di�erent operating categories, including digging, idling, traveling and optional operations.
Maintenance
Alarm for outside of reset area
11 12
Work status
E�cient Maintenance Keeps the Machine in Peak Operating Condition
More E�cient Maintenance Inside the Cab
Easy Cleaning
More �nely di�erentiated fuses make it easier to locate malfunctions.
Engine oil pan equipped with drain valve.Detachable two-piece �oor mat with handles for easy removal. A �oor drain is located under the �oor mat.
Internal and external air conditioner �lters can be easily removed without tools for cleaning.
If the monitor warning goes o�, the �lter should be reactivated manually using a switch.
Displays only the maintenance information that’s needed, when it’s needed
Self-diagnostic function provides early-warning detection and display of electrical system malfunctions
Service-diagnostic function makes it easier to check the status of the machine
Record function for previous breakdowns including irregular and transient malfunction
Machine Information Display Function
1
1
3
3
Engine oil �lter
Pump drain �lter
2
2
4
4
Pilot �lter
Pre-�lter with water separator
Engine oil panDetachable two-piece �oor matCrawler frame
Air conditioner �lters DPF reactivation switchEasy-access fuse box
Double-element air cleaner
Right side
Left side
Engine oil �lter Pump drain �lterPilot �lter Pre-�lter with water separator
Examples of displaying maintenance information
Highly Durable Super-�ne FilterThe high-capacity hydraulic oil �lter incorporates glass �ber
with superior cleaning power and durability.
Long-Interval MaintenanceLong-life hydraulic oil reduces cost and labor.
Replacement cycle:
1,000 hours
Long-life hydraulic oil:
5,000 hours
DEF/Urea tankStep/Hand rail
13 14
Easy, On-the-Spot MaintenanceThere is ample space in the engine compartment for a mechanic to do maintenance work inside. The distance between steps are lower so entry and exit is easier. And the mechanic can work in comfort, without contortions or unnatural body positions. Finally, the hood is lighter and easier to raise and lower.
Ground Level AccessLaid out for easy access to radiator and cooling system elements.
Maintenance Work, Daily Checks, Etc., Can Be Done from Ground LevelThe layout allows for easy access from the ground for many daily checks and regular maintenance tasks.
NEW
Special sloped crawler side frame design is easily cleaned of mud.
E�cient Maintenance Keeps the Machine in Peak Operating Condition
More E�cient Maintenance Inside the Cab
Easy Cleaning
More �nely di�erentiated fuses make it easier to locate malfunctions.
Engine oil pan equipped with drain valve.Detachable two-piece �oor mat with handles for easy removal. A �oor drain is located under the �oor mat.
Internal and external air conditioner �lters can be easily removed without tools for cleaning.
If the monitor warning goes o�, the �lter should be reactivated manually using a switch.
Displays only the maintenance information that’s needed, when it’s needed
Self-diagnostic function provides early-warning detection and display of electrical system malfunctions
Service-diagnostic function makes it easier to check the status of the machine
Record function for previous breakdowns including irregular and transient malfunction
Machine Information Display Function
1
1
3
3
Engine oil �lter
Pump drain �lter
2
2
4
4
Pilot �lter
Pre-�lter with water separator
Engine oil panDetachable two-piece �oor matCrawler frame
Air conditioner �lters DPF reactivation switchEasy-access fuse box
Double-element air cleaner
Right side
Left side
Engine oil �lter Pump drain �lterPilot �lter Pre-�lter with water separator
Examples of displaying maintenance information
Highly Durable Super-�ne FilterThe high-capacity hydraulic oil �lter incorporates glass �ber
with superior cleaning power and durability.
Long-Interval MaintenanceLong-life hydraulic oil reduces cost and labor.
Replacement cycle:
1,000 hours
Long-life hydraulic oil:
5,000 hours
DEF/Urea tankStep/Hand rail
13 14
Easy, On-the-Spot MaintenanceThere is ample space in the engine compartment for a mechanic to do maintenance work inside. The distance between steps are lower so entry and exit is easier. And the mechanic can work in comfort, without contortions or unnatural body positions. Finally, the hood is lighter and easier to raise and lower.
Ground Level AccessLaid out for easy access to radiator and cooling system elements.
Maintenance Work, Daily Checks, Etc., Can Be Done from Ground LevelThe layout allows for easy access from the ground for many daily checks and regular maintenance tasks.
NEW
Special sloped crawler side frame design is easily cleaned of mud.
Speci�cations SK500LC-10
12 m
11
10
9
8
7
6
5
4
1
2
3
4
5
6
7
8
9
10 m13m 12 11 10 9 8 7 6 5 4 3 2 1
a
d
e
f
c j g
i
bh
3.45 m Standard Arm
15 16
Unit: m
Digging Force (ISO 6015) Unit: kN
Arm length
Overall lengthOverall height (to top of boom)
Overall width of crawler Rigid type
MVLC typeOverall height (to top of cab)Ground clearance of rear end*Ground clearance*Tail swing radiusDistance from center of swing to rear end
Tumbler distance Rigid type
MVLC type
Overall length of crawler Rigid type
MVLC type
Track gauge Rigid type
MVLC typeShoe widthOverall width of upperstructure
AB
C
DEFGG'
H
I
J
KL
12,1703,780
11,9104,240
3,3503,490 (2,990)
3,3801,340*510*3,8003,8004,4004,4005,4505,4602,750
2,890 (2,390)600
2,980
12,1403,570
ME (MVLC)2.4 m
Standard3.45 m
Short3.0 m
Operating Weight & Ground Pressure
Dimensions
Working Ranges
Unit: mm
Triple grouser shoes (even height)
StandardHD
Double grousershoes (even height)Shaped
Shoe width mm
Overall width of crawler Rigid type mm
MVLC type mm
Ground pressure Rigid type kPa
MVLC type kPa
Operating weight Rigid type kg
MVLC type kg
In standard trim, with standard boom, 3.45 m arm, and 1.9 m3 ISO heaped bucket
Boom ArmRange
a- Max. digging reach
b- Max. digging reach at ground level
c- Max. digging depthd- Max. digging heighte- Max. dumping clearancef- Min. dumping clearanceg- Max. vertical wall digging depthh- Min. swing radius
i- Horizontal digging stroke at ground level
j- Digging depth for 2.4 m (8') �at bottom
Bucket capacity ISO heaped m3
Arm length
Bucket digging forceArm crowding force
12,1903,720
Long4.04 m
*Power Boost engaged.
*As boom hoot of MVLC is 120mm higher than rigid type, working range of MVLC rise 120mm higher than rigid type.
*Without including height of shoe lug.
*ME arm specs should be used for light-digging.
Re�lling Capacities & Lubrications
638 L47.4 L42.5 L2 x 15 L2 x 5 L370.8 L tank oil level631 L hydraulic system83 L
Fuel tankCooling systemEngine oilTravel reduction gearSwing reduction gear
Hydraulic oil tank
DEF/Urea tank
Boom, Arm & Bucket
170 mm x 1,590 mm190 mm x 1,970 mm160 mm x 1,410 mm
Boom cylindersArm cylinderBucket cylinder
104 dB(A) (ISO 6395)69 dB(A) (ISO 6396)
ExternalOperator
Cab & Control
CabAll-weather, sound-suppressed steel cab mounted on the high suspensionmounts �lled with silicone oil and equipped with a heavy, insulated �oor mat.
Control
Noise levels
Two hand levers or two foot pedals for forward andbackward operations of each track independently.
Engine
Model HINO P11C-VNWater-cooled, 4 cycle 6 cylinder direct injection type diesel engine with intercooler turbo-charger (Stage IV-compliant engine)6122 mm x 150 mm10.52 LNet 271 kW/1,850 min-1
(ISO 14396 : without fan)
Net 1,470 N . m/1,400 min-1
(ISO 14396 : without fan)
Type
No. of cylindersBore and strokeDisplacement
Rated power output
Max. torque
Swing System
Axial piston motorOil disk brake, hydraulic operated automatically
7.6 min-1
183 kN.m3,800 mm5,140 mm
Swing motor
Parking brake
Swing speedSwing torqueTail swing radiusMin front swing radius
Travel System
2 x axial-piston, two-step motorsHydraulic brake per motorOil disk brake per motor50 each side5.4/3.4 km/h415 kN70 % (35 deg)510 mm
Travel motors Travel brakesParking brakesTravel shoesTravel speed (high/low)Drawbar pulling forceGradeabilityGround clearance
8688
49,90051,400
6003,350
3,490 (2,990)8689
50,30051,800
8689
50,20051,700
8003,550
3,690 (3,190)6668
51,30052,800
9003,650
–59–
51,900–
Shoe width mmOverall width of crawler mmGround pressure kPaOperating weight kg
In standard trim, MVLC type with 6.3 m ME boom, 2.4 m ME arm , and 3.4 m3 ISO heaped bucket
8851,300
6003,490 (2,990)
9052,400
9052,300
8003,690 (3,190)
6852,800
Hydraulic System
Two variable displacement pumps + One gear pump2 x 370 L/min, 1 x 63.5 L/min
31.4 Mpa34.3 Mpa34.3 Mpa25.8 Mpa5.0 MpaGear type8-spoolAir cooled type
Type
Max. discharge �ow
Excavating circuits (main)Power boostTravel circuitSwing circuitPilot control circuitPilot control pumpMain control valveOil cooler
Pump
Relief valve setting
266/291*223/244*
282/308*249/272*
267/292*203/222*
12.07
11.84
7.8110.937.582.777.125.14
6.1
7.67
1.9
11.77
11.54
7.3611.167.723.226.685.28
5.21
7.21
2.1
10.88
10.63
6.4810.856.923.115.494.78
3.9
6.31
3.4
ME (MVLC)2.4 m
Standard3.45 m
Short3.0 m
ME (MVLC)2.4 m
Standard3.45 m
289/264*198/181*
12.61
12.4
8.411.147.792.187.5
5.21
7.07
8.27
1.6
Long4.04 m
Long4.04 m
Short3.0 m
7.0 m*6.3 m
Attachments
Backhoe bucket and combination
B
E
G, G’
HI
A
L
F
D
JC
K
3.42.5
1,9901,870
62,190
1.41.0
1,2251,100
41,250
1.61.15
1,3751,250
41,330
1.91.4
1,6701,550
51,510
2.11.5
1,7501,620
51,560
2.41.7
1,9801,850
51,690
UseBackhoe bucket
Normal digging Light-duty Mass excavating
Standard Recommended Loading only Not recommended
*
Triple grouser shoes (even height)Double grousershoes (even height)
Shaped
StandardHD
Bucket capacity ISO heaped m3
Struck m3
Opening width With side cutter mm
Without side cutter mmNo. of teethBucket weight kg 3.0 m short arm
Combination 3.45 m standard arm
4.04 m long arm 6.3 m ME boom and 2.4 ME arm
Speci�cations SK500LC-10
12 m
11
10
9
8
7
6
5
4
1
2
3
4
5
6
7
8
9
10 m13m 12 11 10 9 8 7 6 5 4 3 2 1
a
d
e
f
c j g
i
bh
3.45 m Standard Arm
15 16
Unit: m
Digging Force (ISO 6015) Unit: kN
Arm length
Overall lengthOverall height (to top of boom)
Overall width of crawler Rigid type
MVLC typeOverall height (to top of cab)Ground clearance of rear end*Ground clearance*Tail swing radiusDistance from center of swing to rear end
Tumbler distance Rigid type
MVLC type
Overall length of crawler Rigid type
MVLC type
Track gauge Rigid type
MVLC typeShoe widthOverall width of upperstructure
AB
C
DEFGG'
H
I
J
KL
12,1703,780
11,9104,240
3,3503,490 (2,990)
3,3801,340*510*3,8003,8004,4004,4005,4505,4602,750
2,890 (2,390)600
2,980
12,1403,570
ME (MVLC)2.4 m
Standard3.45 m
Short3.0 m
Operating Weight & Ground Pressure
Dimensions
Working Ranges
Unit: mm
Triple grouser shoes (even height)
StandardHD
Double grousershoes (even height)Shaped
Shoe width mm
Overall width of crawler Rigid type mm
MVLC type mm
Ground pressure Rigid type kPa
MVLC type kPa
Operating weight Rigid type kg
MVLC type kg
In standard trim, with standard boom, 3.45 m arm, and 1.9 m3 ISO heaped bucket
Boom ArmRange
a- Max. digging reach
b- Max. digging reach at ground level
c- Max. digging depthd- Max. digging heighte- Max. dumping clearancef- Min. dumping clearanceg- Max. vertical wall digging depthh- Min. swing radius
i- Horizontal digging stroke at ground level
j- Digging depth for 2.4 m (8') �at bottom
Bucket capacity ISO heaped m3
Arm length
Bucket digging forceArm crowding force
12,1903,720
Long4.04 m
*Power Boost engaged.
*As boom hoot of MVLC is 120mm higher than rigid type, working range of MVLC rise 120mm higher than rigid type.
*Without including height of shoe lug.
*ME arm specs should be used for light-digging.
Re�lling Capacities & Lubrications
638 L47.4 L42.5 L2 x 15 L2 x 5 L370.8 L tank oil level631 L hydraulic system83 L
Fuel tankCooling systemEngine oilTravel reduction gearSwing reduction gear
Hydraulic oil tank
DEF/Urea tank
Boom, Arm & Bucket
170 mm x 1,590 mm190 mm x 1,970 mm160 mm x 1,410 mm
Boom cylindersArm cylinderBucket cylinder
104 dB(A) (ISO 6395)69 dB(A) (ISO 6396)
ExternalOperator
Cab & Control
CabAll-weather, sound-suppressed steel cab mounted on the high suspensionmounts �lled with silicone oil and equipped with a heavy, insulated �oor mat.
Control
Noise levels
Two hand levers or two foot pedals for forward andbackward operations of each track independently.
Engine
Model HINO P11C-VNWater-cooled, 4 cycle 6 cylinder direct injection type diesel engine with intercooler turbo-charger (Stage IV-compliant engine)6122 mm x 150 mm10.52 LNet 271 kW/1,850 min-1
(ISO 14396 : without fan)
Net 1,470 N . m/1,400 min-1
(ISO 14396 : without fan)
Type
No. of cylindersBore and strokeDisplacement
Rated power output
Max. torque
Swing System
Axial piston motorOil disk brake, hydraulic operated automatically
7.6 min-1
183 kN.m3,800 mm5,140 mm
Swing motor
Parking brake
Swing speedSwing torqueTail swing radiusMin front swing radius
Travel System
2 x axial-piston, two-step motorsHydraulic brake per motorOil disk brake per motor50 each side5.4/3.4 km/h415 kN70 % (35 deg)510 mm
Travel motors Travel brakesParking brakesTravel shoesTravel speed (high/low)Drawbar pulling forceGradeabilityGround clearance
8688
49,90051,400
6003,350
3,490 (2,990)8689
50,30051,800
8689
50,20051,700
8003,550
3,690 (3,190)6668
51,30052,800
9003,650
–59–
51,900–
Shoe width mmOverall width of crawler mmGround pressure kPaOperating weight kg
In standard trim, MVLC type with 6.3 m ME boom, 2.4 m ME arm , and 3.4 m3 ISO heaped bucket
8851,300
6003,490 (2,990)
9052,400
9052,300
8003,690 (3,190)
6852,800
Hydraulic System
Two variable displacement pumps + One gear pump2 x 370 L/min, 1 x 63.5 L/min
31.4 Mpa34.3 Mpa34.3 Mpa25.8 Mpa5.0 MpaGear type8-spoolAir cooled type
Type
Max. discharge �ow
Excavating circuits (main)Power boostTravel circuitSwing circuitPilot control circuitPilot control pumpMain control valveOil cooler
Pump
Relief valve setting
266/291*223/244*
282/308*249/272*
267/292*203/222*
12.07
11.84
7.8110.937.582.777.125.14
6.1
7.67
1.9
11.77
11.54
7.3611.167.723.226.685.28
5.21
7.21
2.1
10.88
10.63
6.4810.856.923.115.494.78
3.9
6.31
3.4
ME (MVLC)2.4 m
Standard3.45 m
Short3.0 m
ME (MVLC)2.4 m
Standard3.45 m
289/264*198/181*
12.61
12.4
8.411.147.792.187.5
5.21
7.07
8.27
1.6
Long4.04 m
Long4.04 m
Short3.0 m
7.0 m*6.3 m
Attachments
Backhoe bucket and combination
B
E
G, G’
HI
A
L
F
D
JC
K
3.42.5
1,9901,870
62,190
1.41.0
1,2251,100
41,250
1.61.15
1,3751,250
41,330
1.91.4
1,6701,550
51,510
2.11.5
1,7501,620
51,560
2.41.7
1,9801,850
51,690
UseBackhoe bucket
Normal digging Light-duty Mass excavating
Standard Recommended Loading only Not recommended
*
Triple grouser shoes (even height)Double grousershoes (even height)
Shaped
StandardHD
Bucket capacity ISO heaped m3
Struck m3
Opening width With side cutter mm
Without side cutter mmNo. of teethBucket weight kg 3.0 m short arm
Combination 3.45 m standard arm
4.04 m long arm 6.3 m ME boom and 2.4 ME arm
Lifting Capacities SK500LC-10
Rating over front
Rating over side or 360 degrees
A: Reach from swing centerline to arm topB: Arm top height above/below groundC: Lifting capacities in KilogramsBucket: Without bucketRelief valve setting: 34.3 MPa
17 18
Radius
3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. ReachA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkgkg
SK500LC-10 Boom: 7.0 m Arm: 3.45 m Bucket: without Counterweight: 9,800 kg Shoe: 600 mm (Heavy Lift)
Undercarriage: Rigid type
*13,040*22,230*28,130
*13,040*22,230*28,130
*18,060*22,800*14,800*18,080*25,670*24,140*21,140
*18,06021,440
*14,800*18,080
19,79020,01020,480
*13,830*16,130*18,010*19,070*19,230*18,450*16,350
*13,83014,30013,53013,09012,93012,99013,300
*10,670*11,760*13,020*14,160*14,930*15,140*14,550*12,370
*10,67010,95010,430
9,9809,6709,5309,5709,880
*10,150*10,640*11,310*11,960
12,30012,230
8,5008,2808,0007,7407,5607,500
*10,330*10,090
*9,890*9,980
*10,33010,33010,59011,320
*11,810*11,980
*10,3308,8007,6006,9106,5406,4206,5506,9807,8709,680
7.76 m8.85 m9.59 m
10.04 m10.26 m10.25 m10.01 m
9.53 m8.76 m7.63 m
Radius
3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. ReachA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkgkg
SK500LC-10 Boom: 7.0 m Arm: 3.0 m Bucket: without Counterweight: 9,800 kg Shoe: 600 mm (Heavy Lift)
Undercarriage: Rigid type
*10,230*22,180*25,410
*10,230*22,180*25,410
*19,670
*13,600*23,800*23,330*19,810
*19,670
*13,60020,00020,280
*19,810
*14,670*16,880*18,550*19,340*19,220*18,090*15,410
*14,67014,14013,46013,11013,03013,16013,550
*10,790*11,330*12,350*13,540*14,570*15,180*15,180*14,240
*10,79011,31010,86010,380
9,9709,7109,6209,730
*10,800*11,150*11,740*12,290
12,370*12,260
8,4208,2408,0007,7707,6307,630
*11,290*10,930*10,850*10,920
10,94010,83011,150
*11,820*11,980*11,760
*11,2909,3107,9807,2406,8606,7606,9207,4308,480
10,680
7.36 m8.51 m9.27 m9.74 m9.96 m9.95 m9.70 m9.21 m8.41 m7.22 m
Radius
3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. ReachA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkgkg
SK500LC-10 Boom: 7.0 m Arm: 3.0 m Bucket: without Counterweight: 9,800 kg Shoe: 600 mm (Heavy Lift)
Undercarriage: MVLC type
*11,180*23,220
*11,180*23,220
*20,080
*14,280*24,790*23,120*19,430
*20,080
*14,28021,88022,190
*19,430
*14,850*17,040*18,650*19,360*19,170*17,950*15,080
*14,85015,22014,56014,23014,17014,32014,740
*10,810*11,400*12,450*13,630*14,630*15,210*15,150*14,110
*10,810*11,400
11,65011,16010,76010,51010,43010,560
*10,810*11,190*11,780*12,320*12,580*12,180
9,0508,8608,6108,3908,2508,270
*11,240*10,920*10,850*10,930*11,090
11,20011,560
*11,840*11,980*11,710
*11,2409,8608,5207,7707,3907,3107,5208,1109,300
*11,710
7.47 m8.58 m9.32 m9.76 m9.97 m9.94 m9.67 m9.15 m8.33 m7.10 m
Radius
1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m At Max. ReachA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m-6.0 m
kgkgkgkgkgkgkgkgkgkgkg
SK500LC-10 Boom: 7.0 m Arm: 4.04 m Bucket: without Counterweight: 9,800 kg Shoe: 600 mm (Heavy Lift)
Undercarriage: Rigid type
*8,680*14,920
*8,680*14,920
*6,600*12,720*19,830*29,250
*6,600*12,720*19,830*29,250
*20,700*19,900*19,640*24,690*24,800*22,430*18,040
*20,700*19,900*19,640
19,46019,58019,950
*18,040
*14,980*17,090*18,480*19,010*18,630*17,130*13,630
14,46013,57012,99012,72012,70012,91013,440
*10,880*12,220*13,490*14,440*14,890*14,660*13,340
*10,88010,460
9,9409,5609,3509,3209,500
*9,090*9,310*9,900
*10,660*11,420*12,000
12,040*11,760
8,6908,5508,2807,9707,6607,4307,3007,330
*9,080*9,760
9,8709,750
6,4006,2506,0905,990
*8,740*8,310*8,160*8,230*8,500*8,980
9,66010,240
*11,000*11,300*11,250
*8,7407,8706,8806,2805,9605,8405,9306,2706,9608,310
*11,250
8.47 m9.48 m
10.17 m10.60 m10.80 m10.79 m10.57 m10.11 m
9.40 m8.35 m6.81 m
Radius
1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m At Max. ReachA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m-6.0 m
kgkgkgkgkgkgkgkgkgkgkg
SK500LC-10 Boom: 7.0 m Arm: 4.04 m Bucket: without Counterweight: 9,800 kg Shoe: 600 mm (Heavy Lift)
Undercarriage: MVLC type
*9,180*15,440
*9,180*15,440
*7,070*13,240*20,480*30,170
*7,070*13,240*20,480*30,170
*21,050*19,530*19,890*25,250*24,660*22,170*17,550
*21,050*19,530*19,890
21,33021,47021,880
*17,550
*12,770*15,160*17,230*18,550*19,010*18,560*16,950*13,180
*12,770*15,160
14,66014,10013,85013,85014,080
*13,180
*10,980*12,320*13,580*14,500*14,900*14,600*13,150
*10,98011,24010,72010,35010,15010,14010,340
*9,090*9,350*9,960
*10,720*11,470*12,030*12,210*11,680
*9,0909,1808,9008,5808,2808,0507,9307,980
*9,280*9,790
*10,15010,080
6,9106,7506,6006,500
*8,690*8,290*8,160*8,240*8,530*9,030*9,850
*10,650*11,030*11,320*11,200
*8,690*8,290
7,3606,7606,4406,3406,4606,8507,6409,180
*11,200
8.57 m9.55 m
10.21 m10.62 m10.81 m10.78 m10.54 m10.07 m
9.33 m8.25 m6.66 m
Notes:1. Do not attempt to lift or hold any load that is greater than these lift capacities at their speci�ed lift point radius
and heights. Weight of all accessories must be deducted from the above lift capacities.2. Lift capacities are based on machine standing on level, �rm, and uniform ground. User must make allowance for
job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc.
3. Arm top de�ned as lift point.
4. The above lifting capacities are in compliance with ISO 10567. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Lifting capacities marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions before operating this machine. Rules for safe operation of equipment should be adhered to at all times.
6. Lift capacities apply to only machine as originally manufactured and normally equipped by KOBELCO CONSTRUCTION MACHINERY CO., LTD.
Radius
3.0 m 4.5 m 6.0 m 7.5 m At Max. ReachA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m
kgkgkgkgkgkgkgkgkg
SK500LC-10 Boom: 6.3 m Arm: 2.4 m Bucket: without Counterweight: 9,800 kg Shoe: 600 mm (Heavy Lift)
Undercarriage: MVLC type
*27,120 *2712024,61021,300
22,20021,300
*14,060*15,780*17,710*19,110*19,550
18,810*16,260
*14,060*15,780
15,25014,65014,38014,40014,760
12,970*13,570
14,47015,22015,430
*14,520
11,89011,55011,14010,81010,64010,730
*13,77011,82010,970
*10,65010,710
*11,130*12,010*13,350
12,890
*13,770*11,820
10,5709,4108,8808,8009,190
10,21012,500
5.77 m7.16 m8.03 m8.55 m8.78 m8.74 m8.44 m7.84 m6.86 m
Radius
3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. ReachA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkgkg
SK500LC-10 Boom: 7.0 m Arm: 3.45 m Bucket: without Counterweight: 9,800 kg Shoe: 600 mm (Heavy Lift)
Undercarriage: MVLC type
*13,730*23,050*27,630
*13,730*23,050*27,630
*18,450*21,460*14,820*18,550*25,670*23,960*20,820
*18,450*21,460*14,820*18,550
21,67021,920
*20,820
*14,010*16,300*18,120*19,110*19,210*18,340*16,090
*14,01015,38014,63014,20014,06014,15014,480
*10,750*11,860*13,120*14,240*14,970*15,130*14,450*12,030
*10,75011,74011,21010,77010,46010,34010,40010,750
*10,170*10,690*11,370*12,010*12,410*12,330
9,1308,9008,6108,3608,1808,130
*10,300*10,060
*9,890*10,000*10,370
10,68010,980
*11,500*11,830*11,980
*10,3009,3308,1107,4207,0506,9607,1307,6208,630
10,720
7.87 m8.93 m9.63 m
10.07 m10.27 m10.24 m
9.98 m9.48 m8.69 m7.51 m
Lifting Capacities SK500LC-10
Rating over front
Rating over side or 360 degrees
A: Reach from swing centerline to arm topB: Arm top height above/below groundC: Lifting capacities in KilogramsBucket: Without bucketRelief valve setting: 34.3 MPa
17 18
Radius
3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. ReachA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkgkg
SK500LC-10 Boom: 7.0 m Arm: 3.45 m Bucket: without Counterweight: 9,800 kg Shoe: 600 mm (Heavy Lift)
Undercarriage: Rigid type
*13,040*22,230*28,130
*13,040*22,230*28,130
*18,060*22,800*14,800*18,080*25,670*24,140*21,140
*18,06021,440
*14,800*18,080
19,79020,01020,480
*13,830*16,130*18,010*19,070*19,230*18,450*16,350
*13,83014,30013,53013,09012,93012,99013,300
*10,670*11,760*13,020*14,160*14,930*15,140*14,550*12,370
*10,67010,95010,430
9,9809,6709,5309,5709,880
*10,150*10,640*11,310*11,960
12,30012,230
8,5008,2808,0007,7407,5607,500
*10,330*10,090
*9,890*9,980
*10,33010,33010,59011,320
*11,810*11,980
*10,3308,8007,6006,9106,5406,4206,5506,9807,8709,680
7.76 m8.85 m9.59 m
10.04 m10.26 m10.25 m10.01 m
9.53 m8.76 m7.63 m
Radius
3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. ReachA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkgkg
SK500LC-10 Boom: 7.0 m Arm: 3.0 m Bucket: without Counterweight: 9,800 kg Shoe: 600 mm (Heavy Lift)
Undercarriage: Rigid type
*10,230*22,180*25,410
*10,230*22,180*25,410
*19,670
*13,600*23,800*23,330*19,810
*19,670
*13,60020,00020,280
*19,810
*14,670*16,880*18,550*19,340*19,220*18,090*15,410
*14,67014,14013,46013,11013,03013,16013,550
*10,790*11,330*12,350*13,540*14,570*15,180*15,180*14,240
*10,79011,31010,86010,380
9,9709,7109,6209,730
*10,800*11,150*11,740*12,290
12,370*12,260
8,4208,2408,0007,7707,6307,630
*11,290*10,930*10,850*10,920
10,94010,83011,150
*11,820*11,980*11,760
*11,2909,3107,9807,2406,8606,7606,9207,4308,480
10,680
7.36 m8.51 m9.27 m9.74 m9.96 m9.95 m9.70 m9.21 m8.41 m7.22 m
Radius
3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. ReachA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkgkg
SK500LC-10 Boom: 7.0 m Arm: 3.0 m Bucket: without Counterweight: 9,800 kg Shoe: 600 mm (Heavy Lift)
Undercarriage: MVLC type
*11,180*23,220
*11,180*23,220
*20,080
*14,280*24,790*23,120*19,430
*20,080
*14,28021,88022,190
*19,430
*14,850*17,040*18,650*19,360*19,170*17,950*15,080
*14,85015,22014,56014,23014,17014,32014,740
*10,810*11,400*12,450*13,630*14,630*15,210*15,150*14,110
*10,810*11,400
11,65011,16010,76010,51010,43010,560
*10,810*11,190*11,780*12,320*12,580*12,180
9,0508,8608,6108,3908,2508,270
*11,240*10,920*10,850*10,930*11,090
11,20011,560
*11,840*11,980*11,710
*11,2409,8608,5207,7707,3907,3107,5208,1109,300
*11,710
7.47 m8.58 m9.32 m9.76 m9.97 m9.94 m9.67 m9.15 m8.33 m7.10 m
Radius
1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m At Max. ReachA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m-6.0 m
kgkgkgkgkgkgkgkgkgkgkg
SK500LC-10 Boom: 7.0 m Arm: 4.04 m Bucket: without Counterweight: 9,800 kg Shoe: 600 mm (Heavy Lift)
Undercarriage: Rigid type
*8,680*14,920
*8,680*14,920
*6,600*12,720*19,830*29,250
*6,600*12,720*19,830*29,250
*20,700*19,900*19,640*24,690*24,800*22,430*18,040
*20,700*19,900*19,640
19,46019,58019,950
*18,040
*14,980*17,090*18,480*19,010*18,630*17,130*13,630
14,46013,57012,99012,72012,70012,91013,440
*10,880*12,220*13,490*14,440*14,890*14,660*13,340
*10,88010,460
9,9409,5609,3509,3209,500
*9,090*9,310*9,900
*10,660*11,420*12,000
12,040*11,760
8,6908,5508,2807,9707,6607,4307,3007,330
*9,080*9,760
9,8709,750
6,4006,2506,0905,990
*8,740*8,310*8,160*8,230*8,500*8,980
9,66010,240
*11,000*11,300*11,250
*8,7407,8706,8806,2805,9605,8405,9306,2706,9608,310
*11,250
8.47 m9.48 m
10.17 m10.60 m10.80 m10.79 m10.57 m10.11 m
9.40 m8.35 m6.81 m
Radius
1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m At Max. ReachA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m-6.0 m
kgkgkgkgkgkgkgkgkgkgkg
SK500LC-10 Boom: 7.0 m Arm: 4.04 m Bucket: without Counterweight: 9,800 kg Shoe: 600 mm (Heavy Lift)
Undercarriage: MVLC type
*9,180*15,440
*9,180*15,440
*7,070*13,240*20,480*30,170
*7,070*13,240*20,480*30,170
*21,050*19,530*19,890*25,250*24,660*22,170*17,550
*21,050*19,530*19,890
21,33021,47021,880
*17,550
*12,770*15,160*17,230*18,550*19,010*18,560*16,950*13,180
*12,770*15,160
14,66014,10013,85013,85014,080
*13,180
*10,980*12,320*13,580*14,500*14,900*14,600*13,150
*10,98011,24010,72010,35010,15010,14010,340
*9,090*9,350*9,960
*10,720*11,470*12,030*12,210*11,680
*9,0909,1808,9008,5808,2808,0507,9307,980
*9,280*9,790
*10,15010,080
6,9106,7506,6006,500
*8,690*8,290*8,160*8,240*8,530*9,030*9,850
*10,650*11,030*11,320*11,200
*8,690*8,290
7,3606,7606,4406,3406,4606,8507,6409,180
*11,200
8.57 m9.55 m
10.21 m10.62 m10.81 m10.78 m10.54 m10.07 m
9.33 m8.25 m6.66 m
Notes:1. Do not attempt to lift or hold any load that is greater than these lift capacities at their speci�ed lift point radius
and heights. Weight of all accessories must be deducted from the above lift capacities.2. Lift capacities are based on machine standing on level, �rm, and uniform ground. User must make allowance for
job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc.
3. Arm top de�ned as lift point.
4. The above lifting capacities are in compliance with ISO 10567. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Lifting capacities marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions before operating this machine. Rules for safe operation of equipment should be adhered to at all times.
6. Lift capacities apply to only machine as originally manufactured and normally equipped by KOBELCO CONSTRUCTION MACHINERY CO., LTD.
Radius
3.0 m 4.5 m 6.0 m 7.5 m At Max. ReachA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m
kgkgkgkgkgkgkgkgkg
SK500LC-10 Boom: 6.3 m Arm: 2.4 m Bucket: without Counterweight: 9,800 kg Shoe: 600 mm (Heavy Lift)
Undercarriage: MVLC type
*27,120 *2712024,61021,300
22,20021,300
*14,060*15,780*17,710*19,110*19,550
18,810*16,260
*14,060*15,780
15,25014,65014,38014,40014,760
12,970*13,570
14,47015,22015,430
*14,520
11,89011,55011,14010,81010,64010,730
*13,77011,82010,970
*10,65010,710
*11,130*12,010*13,350
12,890
*13,770*11,820
10,5709,4108,8808,8009,190
10,21012,500
5.77 m7.16 m8.03 m8.55 m8.78 m8.74 m8.44 m7.84 m6.86 m
Radius
3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. ReachA
B 9.0 m7.5 m6.0 m4.5 m3.0 m1.5 mG.L.-1.5 m-3.0 m-4.5 m
kgkgkgkgkgkgkgkgkgkg
SK500LC-10 Boom: 7.0 m Arm: 3.45 m Bucket: without Counterweight: 9,800 kg Shoe: 600 mm (Heavy Lift)
Undercarriage: MVLC type
*13,730*23,050*27,630
*13,730*23,050*27,630
*18,450*21,460*14,820*18,550*25,670*23,960*20,820
*18,450*21,460*14,820*18,550
21,67021,920
*20,820
*14,010*16,300*18,120*19,110*19,210*18,340*16,090
*14,01015,38014,63014,20014,06014,15014,480
*10,750*11,860*13,120*14,240*14,970*15,130*14,450*12,030
*10,75011,74011,21010,77010,46010,34010,40010,750
*10,170*10,690*11,370*12,010*12,410*12,330
9,1308,9008,6108,3608,1808,130
*10,300*10,060
*9,890*10,000*10,370
10,68010,980
*11,500*11,830*11,980
*10,3009,3308,1107,4207,0506,9607,1307,6208,630
10,720
7.87 m8.93 m9.63 m
10.07 m10.27 m10.24 m
9.98 m9.48 m8.69 m7.51 m
SK500LC-10
Inquiries To:
Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines with speci�cations that di�er from those of machines sold in your areas. Please consult your nearest KOBELCO distributor for those items you require. Specialist equipment is needed to use this machine in demolition work. Before using it please contact your KOBELCO dealer. Due to our policy of continuous product improvements all designs and speci�cations are subject to change without advance notice.Copyright by No part of this catalog may be reproduced in any manner without notice.
Note: Standard and optional equipment may vary. Consult your KOBELCO dealer for speci�cs.
STANDARD EQUIPMENTENGINE Engine, HINO P11C-VN, diesel engine with turbocharger and intercooler Automatic engine deceleration Auto Idle Stop (AIS) Batteries (2 x 12V - 176Ah) Starting motor (24V - 5 kW), 60 amp alternator Automatic engine shut-down for low engine oil pressure Engine oil pan drain cock Double element air cleaner Refueling pump
CONTROL Working mode selector (H-mode, S-mode and ECO-mode) Power Boost Heavy lift Object Handling Kit (boom and arm safety valve + hook) without ME ver. Extra N&B piping (proportional hand control) without ME ver.
SWING SYSTEM & TRAVEL SYSTEM Swing rebound prevention system Straight propel system Two-speed travel with automatic shift down Sealed & lubricated track links Grease-type track adjusters Automatic swing brake
HYDRAULIC Arm regeneration system Auto warm up system Aluminum hydraulic oil cooler Hydraulic �uid �lter clog detector Quick hitch piping (without ME ver.)
MIRRORS, LIGHTS & CAMERAS Rearview mirror Three front working lights Rear & right side camera
CAB & CONTROL Two control levers, pilot-operated Horn, electric Cab light (interior) Luggage tray Large cup holder Detachable two-piece �oor mat Headrest Handrails Intermittent windshield wiper with double-spray washer Skylight Tinted safety glass Pull-up type front window and removable lower front window Easy-to-read multi-display color monitor Automatic air conditioner Emergency escape hammer Air suspension seat with heater Radio, AM/FM stereo with speaker USB pin TOP guard (ISO 10262:1998) Remote machine monitoring system “KOMEXS” Tow eyes
ME speci�cation Various optional arms Wide range of shoes Additional track guide Two cab lights Mechanical suspension seat (Optional for N&B piping speci�cation) Rain visor (may interfere with bucket action)
Cab guard Quick hitch piping (ME ver.) Travel alarm Lower Under Cover Hydraulic pressure adjustment function for N&B piping Object Handling Kit (boom and arm safety valve + hook) (ME ver.)
OPTIONAL EQUIPMENT
1.4 - 3.4 m3
49,900 kg - 52,800 kg
271 kW / 1,850 min-1
Bucket Capacity:
Engine Power:
Operating Weight:
Veluwezoom 151327 AE AlmereThe Netherlandswww.kobelco-europe.com
KOBELCO CONSTRUCTION MACHINERY EUROPE B.V.
December 2016 | POD032