enetwork skill exam ccna 1 4.0 2012 100%

7/30/2019 ENetwork Skill Exam CCNA 1 4.0 2012 100%

1/15

ENetwork Skill Exam CCNA 1 4.02012 100%TAKE ASSESSMENT

ENETWORK SKILL EXAM

CCNA EXPLORATION: NETWORK FUNDAMENTALS(VERSION 4.0) ANSWERS 2011 2012

Download enetwork-skill-exam-ccna-1.pkt fileNote: s2/0 change to s0/0/0

Network Diagram, IP address = 122.22.0.0/22

A given network as in the diagram above, you need to perform the following tasks:

Section 1: Using VLSM to create the IP address plan

LAN1: 310 host addresses




Loopback1: 30 host addresses
http://www.mediafire.com/?716govvzh8hu5o7http://www.mediafire.com/?716govvzh8hu5o7http://www.mediafire.com/?716govvzh8hu5o7


2/15

Loopback2: 10 host addresses

Wan link: 2 host addresses

Network Address Mask Des Mask

LAN1 122.22.0.0 /23 255.255.254.0

LAN2 122.22.2.0 /24 255.255.255.0

LAN3 122.22.3.0 /26 255.255.255.192

LAN4 122.22.3.64 /26 255.255.255.192

Loopback1 122.22.3.128 /27 255.255.255.224

Loopback2 122.22.3.160 /28 255.255.255.240

Wan link 122.22.3.176 /30 255.255.255.252

Section 2: assign IP addresses, subnet masks and default gateways to the networking

devices.

In each network, assign ip address follow this order

Address for interfaces of networking device (routers interface) +1

Note: Address for interfaces of networking device with WAN link: router1 +1; router2 +2

Address for servers WEB, DHCP: +2

Address for servers MAIL, DNS: +3

Address for servers FTP, TFTP: +4

Address for PC clients

PC4: +4

PC5: +5

PC6: +6

Ex: In the subnetwork: 192.168.1.128/25 (there are WEB, MAIL, TFTP, PC6)

Routers interface: 192.168.1.129

WEB server: 192.168.1.130

MAIL server: 192.168.1.131

TFTP server: 192.168.1.132

PC6 client: 192.168.1.134


3/15

PC/Server IP address Subnet mask Default gateway DNS Server

LAN1

Web www.cisco.com 122.22.0.2 255.255.254.0 122.22.0.1 122.22.0.3

DNS 122.22.0.3 255.255.254.0 122.22.0.1 122.22.0.3

TFTP 122.22.0.4 255.255.254.0 122.22.0.1 122.22.0.3

LAN2

DHCP 122.22.2.2 255.255.255.0 122.22.2.1 122.22.0.3

PC0

DHCPPC1

PC2

PC3

LAN3

PC4 122.22.3.4 255.255.255.192 122.22.3.1 122.22.0.3

PC5 122.22.3.5 255.255.255.192 122.22.3.1 122.22.0.3

PC6 122.22.3.6 255.255.255.192 122.22.3.1 122.22.0.3

LAN4

Web www.test.com 122.22.3.66 255.255.255.192 122.22.3.65 122.22.0.3

Mail bkacad.com 122.22.3.67 255.255.255.192 122.22.3.65 122.22.0.3

ftp.test.com 122.22.3.68 255.255.255.192 122.22.3.65 122.22.0.3

Router1

fa0/0 122.22.0.1 255.255.254.0


4/15

fa1/0 122.22.2.1 255.255.255.0

loopback1 122.22.3.129 255.255.255.224

s2/0 122.22.3.177 255.255.255.252

Router2

fa0/0 122.22.3.1 255.255.255.192

fa1/0 122.22.3.65 255.255.255.192

loopback2 122.22.3.161 255.255.255.240

s2/0 122.22.3.178 255.255.255.252

Section 3: Using Packet Tracer to perform the tasks

Note: You need accuracy, distinguish capital letters and lowercase letters (for ex: bannermotd of

router 1: router1, not Router1)

Basic router/switch configurations:

Hostnames: Assign the Routers names R1, R2.

Passwords & Banner Message: (Routers only).

Console and VTY lines and password, password=class.

Set the privileged mode password: enable password=class, enable secret

password=cisco.

Banner contains the name of device: router1, router2. (type #router1#)

Routers interfaces:

Assign IP addresses and subnet masks

Use the clock rate 64000

Create descriptions, Interface description:

R1-f0/0 connect to lan1




5/15


R1-loopback1 loopback1


R1-s2/0 connect to r2


Static default route:

R1: (config)# ip route 0.0.0.0 0.0.0.0 s2/0

R2: (config)# ip route 0.0.0.0 0.0.0.0 s2/0

Backup configuration: Backup Router1/Router2 configuration on TFTP Server (server file name:R1-confg, R2-confg)

Router1 Router2

hostname

(config)#hostname R1 (config)#hostname R2

console password

(config)#line console 0

(config-line)#password class

(config-line)#login

(config-line)#exit

VTY password

(config)#line vty 0 4


(config-line)#login

(config-line)#exit

privileged mode password

(config)#enable password class

(config)#enable secret cisco

bannermotd


6/15

(config)#banner motd #router1# (config)#banner motd #router2#

fa0/0 interface

(config)#interface fastEthernet 0/0

(config-if)#ip address 122.22.0.1 255.255.254.0

(config-if)#description connect to lan1

(config-if)#no shutdown

(config-if)#exit


(config-if)#ip address 122.22.3.1255.255.255.192



(config-if)#exit

fa1/0 interface





(config-if)#exit


(config-if)#ip address 122.22.3.65

255.255.255.192

(config-if)#description connect to lan4(config-if)#no shutdown

(config-if)#exit

loopback interface

(config)#interface loopback 1


255.255.255.224

(config-if)#description loopback1

(config-if)#exit



255.255.255.240


(config-if)#exit

serial interface

(config)#interface serial 2/0


255.255.255.252

(config-if)#clock rate 64000

(config-if)#description connect to r2


(config-if)#exit



255.255.255.252



(config-if)#exit

default route

(config)# ip route 0.0.0.0 0.0.0.0 s2/0

backup configuration

(config)#copy running-config tftp

Address or name of remote host []? 122.22.0.4


7/15

Configuring the Servers and PCs

Assign an IP address and Subnet mask, Default gateway

Active suitable services

Configuring the DNS server:

Name Type Address

bkacad.com A Record 122.22.3.67

ftp.test.com A Record 122.22.3.68

www.cisco.com A Record 122.22.0.2

www.test.com A Record 122.22.3.66

Configuring the DHCP server:

Default Gateway: 122.22.2.1

DNS Server: 122.22.0.3

Start IP Address: 122.22.2.10

Subnet Mask: 255.255.255.0

Maximum number of users: 20

TFTP Server: 122.22.0.4

Configuring the MAIL server

Domain name: bkacad.com

Add users and passwords (user/pass):

pc1/cisco

pc4/cisco

Configuring the Mail client:

PC Email address Incoming and Outgoing mail server user pass

PC1 [email protected] bkacad.com pc1 cisco


Send mail from pc1 to pc4 and check the result


8/15

Configuring the PC client:

PC0, PC1, PC2, PC3: Assign IP address, subnet mask, default gateway and DNS server

address by DHCP server

PC4, PC5, PC6: Manual assign IP address, subnet mask, default gateway and DNS

Connectivity tests:

Ping from pc2 to pc5 to test whether the network operates successfully.

Ping from pc1 to ftp.test.com to check the connection to the ftp server.

Ping from pc1 to TFTP server to check the connection to the TFTP server.

Ping from pc1 to DNS to check whether the connection to the DNS server.

Ping from pc1 to Web: www.cisco.com to check the connection to the Web server.

Ping from pc1 to Web: www.test.com to check the connection to the Web server.

Ping from pc1 to Mail: bkacad.com to check the connection to the Mail server.

Create a .pkt file: After finishing the configuration tasks, students have to save it to your_name.pkt

file (example:NguyenVanA.pkt) and copy to the suitable folder

Storage the file on the server

ENETWORK BONUS EXAMEN CCNA 1 4.0 2012 100%

TOMA DE EVALUACIN - ENETWORK HABILIDAD DEL EXAMEN - CCNA

Exploration: Aspectos bsicos de networking (versin 4.0) - RESPUESTAS -

2011-2012


9/15

Descargar archivo eNetwork-habilidad-examen-ccna-1.pkt Nota: s2 / 0

cambio a s0/0/0

Diagrama de red, la direccin IP 122.22.0.0/22 =

Una red determinada como en el diagrama anterior, es necesario realizar las

siguientes tareas:Seccin 1: El uso de VLSM para crear el plan de la direccin IP

LAN1: 310 direcciones de host




Loopback1: 30 direcciones de host

Loopback2: 10 direcciones de hostEnlace WAN: 2 direcciones de host

Network Address Mask Des Mask

LAN1 122.22.0.0 /23 255.255.254.0

LAN2 122.22.2.0 /24 255.255.255.0


10/15

LAN3 122.22.3.0 /26 255.255.255.192

LAN4 122.22.3.64 /26 255.255.255.192

Loopback1 122.22.3.128 /27 255.255.255.224

Loopback2 122.22.3.160 /28 255.255.255.240

Wan link 122.22.3.176 /30 255.255.255.252

Seccin 2: asignar direcciones IP, mscaras de subred y puertas de acceso por defecto

para los dispositivos de red.

En cada red, asigne la direccin IP Siga este orden

Direccin para las interfaces del dispositivo de red (interfaz del router) 1

Nota: Direccin de las interfaces de dispositivo de red con enlace WAN: router1 1;

router2+ 2

Direccin para servidores WEB, DHCP: 2

Direccin para servidores de correo, DNS: 3

Direccin de servidores FTP, TFTP: 4

Direccin para clientes PC

PC4: 4

PC5: 5

PC6: 6

Ejemplo: En la subred: 192.168.1.128/25 (hay WEB, MAIL, TFTP, PC6)

Interfaz del router: 192.168.1.129

Servidor WEB: 192.168.1.130

Servidor de correo: 192.168.1.131

TFTP servidor: 192.168.1.132

PC6 cliente: 192.168.1.134

PC/Server IP address Subnet mask Default gateway DNS Server

LAN1

Web www.cisco.com 122.22.0.2 255.255.254.0 122.22.0.1 122.22.0.3DNS 122.22.0.3 255.255.254.0 122.22.0.1 122.22.0.3

TFTP 122.22.0.4 255.255.254.0 122.22.0.1 122.22.0.3

LAN2

DHCP 122.22.2.2 255.255.255.0 122.22.2.1 122.22.0.3

PC0 DHCP


11/15

PC1

PC2

PC3

LAN3

PC4 122.22.3.4 255.255.255.192 122.22.3.1 122.22.0.3

PC5 122.22.3.5 255.255.255.192 122.22.3.1 122.22.0.3

PC6 122.22.3.6 255.255.255.192 122.22.3.1 122.22.0.3

LAN4

Web www.test.com 122.22.3.66 255.255.255.192 122.22.3.65 122.22.0.3

Mail bkacad.com 122.22.3.67 255.255.255.192 122.22.3.65 122.22.0.3

ftp.test.com 122.22.3.68 255.255.255.192 122.22.3.65 122.22.0.3

Router1

fa0/0 122.22.0.1 255.255.254.0fa1/0 122.22.2.1 255.255.255.0

loopback1 122.22.3.129 255.255.255.224

s2/0 122.22.3.177 255.255.255.252

Router2

fa0/0 122.22.3.1 255.255.255.192

fa1/0 122.22.3.65 255.255.255.192

loopback2 122.22.3.161 255.255.255.240

s2/0 122.22.3.178 255.255.255.252

Seccin 3: El uso de Packet Tracer para realizar las tareas

Nota: Es necesario exactitud, distinguir maysculas y minsculas (por ejemplo:

bannermotd del enrutador 1: router1, no Router1)

Enrutador bsico / configuraciones del switch:

Nombres de host: Asigne el nombre Routers R1, R2.

Contraseas y Banner Mensaje: (solo Routers).

Lneas de consola y de VTY y contrasea, password = "clase".

Establezca la contrasea del modo privilegiado: enable password = "clase", enable

secret password = 'cisco'.

Banner contiene el nombre del dispositivo: router1, router2. (tipo '# router1 #')

Routers interfaces:


12/15

Asignacin de direcciones IP y mscaras de subred

Utilice la velocidad de reloj 64000

Crear descripciones, la descripcin de interfaz:









Static ruta por defecto:

R1: (config) # ip ruta 0.0.0.0 0.0.0.0 s2 / 0

R2: (config) # ip route 0.0.0.0 0.0.0.0 s2 / 0

Configuracin de copia de seguridad: Copia de seguridad de configuracin

Router1/Router2 TFTP Server (servidor de nombre de archivo: R1-confg, R2-confg)

Router1 Router2

hostname

(config)#hostname R1 (config)#hostname R2

console password

(config)#line console 0


(config-line)#login

(config-line)#exit

VTY password

(config)#line vty 0 4


(config-line)#login

(config-line)#exit

privileged mode password

(config)#enable password class

(config)#enable secret cisco

bannermotd

(config)#banner motd #router1# (config)#banner motd #router2#

fa0/0 interface


13/15





(config-if)#exit



255.255.255.192



(config-if)#exitfa1/0 interface





(config-if)#exit



255.255.255.192



(config-if)#exit

loopback interface




(config-if)#exit




(config-if)#exit

serial interface



255.255.255.252

(config-if)#clock rate 64000



(config-if)#exit



255.255.255.252



(config-if)#exit

default route

(config)# ip route 0.0.0.0 0.0.0.0 s2/0

backup configuration

(config)#copy running-config tftp

Address or name of remote host []? 122.22.0.4

Configuracin de los servidores y PCs

Asigne una direccin IP y la mscara de subred, Puerta de enlace predeterminada

Servicios adecuados Activo

Configuracin del servidor DNS:

Name Type Address

bkacad.com A Record 122.22.3.67

ftp.test.com A Record 122.22.3.68


14/15

www.cisco.com A Record 122.22.0.2

www.test.com A Record 122.22.3.66

Configuracin del servidor DHCP:

Puerta de enlace predeterminada: 122.22.2.1

Servidor DNS: 122.22.0.3

Inicio Direccin IP: 122.22.2.10

Mscara de subred: 255.255.255.0

Nmero mximo de usuarios: 20

TFTP servidor: 122.22.0.4

Configuracin del servidor de correo

Nombre de dominio: bkacad.com

Aadir usuarios y contraseas (usuario / contrasea): pc1/cisco

pc4/cisco

Configuracin del cliente de correo:

PC Email address Incoming and Outgoing mail server user pass



Enviar correo desde PC1 a PC4 y comprobar el resultado

Configuracin del PC cliente:

PC0, PC1, PC2, PC3: Asignar la direccin IP, mscara de subred, puerta de enlace

predeterminada y la direccin del servidor DNS del servidor DHCP

PC4, PC5, PC6: Manual Direccin asignar IP, mscara de subred, puerta de enlace

predeterminada y DNS

Pruebas de conectividad:

Ping de PC2 a PC5 para probar si la red funciona con xito.

Haga ping desde PC1 a ftp.test.com para comprobar la conexin con el servidor

ftp.

Haga ping desde PC1 a TFTP servidor para comprobar la conexin con el servidor

TFTP.


15/15

Haga ping desde PC1 a DNS para comprobar si la conexin con el servidor DNS.

Haga ping desde PC1 a la Web: www.cisco.com para comprobar la conexin con el

servidor Web.

Haga ping desde PC1 a la Web: www.test.com para comprobar la conexin con el

servidor Web.Haga ping desde PC1 a Mail: bkacad.com para comprobar la conexin con el

servidor de correo.

Crear un archivo pkt:. Despus de terminar las tareas de configuracin, los estudiantes

tienen que guardarlo en your_name.pkt archivo (ejemplo: NguyenVanA.pkt) y la copia a la

carpeta adecuada

Guarde el archivo en el servidor

http://www.qcrack.com/2012/12/enetwork-skill-exam-ccna-1-40-2012-100.html
http://www.qcrack.com/2012/12/enetwork-skill-exam-ccna-1-40-2012-100.htmlhttp://www.qcrack.com/2012/12/enetwork-skill-exam-ccna-1-40-2012-100.htmlhttp://www.qcrack.com/2012/12/enetwork-skill-exam-ccna-1-40-2012-100.html

enetwork skill exam ccna 1 4.0 2012 100%

Documents