enercat plunger lift tool - revelantrevelant.com/wp...plunger-tool-installation-guide.pdf ·...
TRANSCRIPT
W W W . R E V E L A N T . C O M
INSTALLATION GUIDE
ENERCAT PLUNGER LIFT TOOL
• The Enercat Tool converts the energy from downhole temperature and pressure to specific vibrational frequencies minimizing or preventing paraffin, asphaltene, heavy oil, and scale and breaking emulsion.
• The Enercat Plunger Lift Tool is set in the seating nipple by slick line and the bumper spring assembly will need to be set just above the tool on a three slip stop or a collar stop (see page 2).
• The Plunger Lift Tool Assembly is made up of a fish neck, Enercat Trim Tool(s) and a seating assembly sized for the correct seating nipple.
Installation Instructions 1. The Enercat Trim Tool consists of a thin tube with Enercat material inside, and the connecting
ends are screwed into the tube with fine threads
2. Do not place wrenches on the tube portion of the trim tool
3. Do not place wrenches on the ends of the trim tool and tighten multiple points with the fine threads in the middle, this will damage the threads and void the warranty
4. Tighten one connection at a time to API specifications for 5/8” sucker rods
5. Screw the fish neck to the trim tool
6. Screw multiple trim tools together using connectors for increased capacity if needed
7. Screw the trim tool(s) to the seating assembly
8. Confirm the slickline unit has a lubricator of adequate length to install tools Tool Limitations
The tool begins to lose efficacy when the well has a formation GOR of >1,000 going up the tubing. If the gas is breaking out and going up the annulus, it is less of a concern.
The tool needs to be installed as close to the perforations as possible, so it can treat the oil before it experiences a significant pressure and temperature drop which changes the oil composition that the tool cannot reverse. If you are “skimming” the well and the tool is 1,000’ above the perforations, the tool may not be effective.
Tool Size and Capacity
NOTE: Tools can be linked together to increase BOPD capacity. Tools are nickel coated for corrosion resistance For extremely corrosive conditions, contact us for custom tools
Product Name TreatmentCapacity/Tool
10”x 1.5” Standard Trim Tool <5 BOPD
16”x 1.5” Standard Trim Tool <12 BOPD
28”x 1.5” Standard Trim Tool <20 BOPD
48”x 1.5” Standard Trim Tool <40 BOPD
48”x 2.0” Standard Trim Tool <50 BOPD
Accessories
Fish Neck
2-3/8” Seating Assembly 2-7/8” Seating Assembly
Standard Connector XL Connector
W W W . R E V E L A N T . C O M
INSTALLATION GUIDE
ENERCAT PLUNGER LIFT TOOLBOTTOM HOLE ASSEMBLY
Seating Nipple
Packer
Tubing
BottomGas LiftMandrel
TubingPlunger
Bumper StringAssembly
3-Slip Stop
Fish Neck
EnercatTrim Tool
SeatingAssembly
EnercatPlungerLiftAssembly