enco august hot deals

SEE PAGE 2 FOR DETAILS

FREEPLUS

See Page 24

See Page 57

See Page 61

See Page 3

See Page 7

See Page 4 See Page 76

Starting At

$595

Sale PriceModel # MN505-0453

$5295


$4995Starting At

$2,395

As Low As

$299

As Low As

$469Sale Price

Model # MN625-0223

$1999

9" x 16" Horizontal Bandsaws

Type 27 Cut-Off Wheels & Depressed Center Wheels

5 Pc. Locking C-Clamp Set

5C Spin-Index

2 & 4 Flute Carbide Single End MillsIncandescent Magnetic Base Work Light

Hex Key Sets

01-80_ HD 15-08_Cover.indd 201-80_ HD 15-08_Cover.indd 2 7/15/15 7:59 AM7/15/15 7:59 AM

http://www.use-enco.com/CGI/INSRIT?PMAKA=MN505-0453&PMCTLG=01



http://www.use-enco.com/CGI/INPDF?PMPAGE=57&PMCTLG=01









http://www.use-enco.com

PHONE: 800-USE-ENCO (800-873-3626)

IT’S IN STOCK AND READY TO SHIP!• 99% In-Stock Inventory!• All in-stock orders ship within one business day. Ask your

sales associate for detailsSHIPPING DETAILSOur primary shipping method for orders weighing less than 125 lbs. is UPS Ground. Some items weighing less than 125 lbs. must be shipped truck due to size or fragility. DOT regulated items cannot be shipped via air. Alaska, Hawaii and Puerto Rico customers - Air shipments only. “Free Shipping” applies to select items that are identifi ed in a current Enco catalog. “Free Shipping” means standard ground (small parcel or truck) shipment to a location within the continental U.S. only. Lift gate and other non-standard services will incur an additional charge; call for details.

Enco does not accept C.O.D. payment for any order. Residential deliveries will incur a $1.15 surcharge. Rural deliveries will incur a $1.75 surcharge.

RETURNS You may return an item for credit within 30 days of shipment, provided it is unused and in resalable condition, found to be defective, or not specifi cally restricted from returns.Call Enco at 800-USE-ENCO to obtain a Return Authorization (RA) number. No returns will be accepted without an RA number. Machinery will be repaired or replaced at Enco’s discretion and according to our Machinery Warranty; ask for details before purchasing. All prices are subject to change without notice. Pricing, photographic and typographical errors are subject to corrections. For complete Terms of Sale, see the current Enco Master Catalog, visit use-enco.com, or call 800-USE-ENCO.

OUR TERMS OF SALE

WE WILL BEAT ANY ADVERTISED PRICE!

If you fi nd a lower advertised price on any item we sell, just send us a copy of the ad and Enco will meet

it and beat it by 5%!*

*Some limitations apply.Please call for details.

QUICK INDEX Abrasives ............................55-59

Cutting Tools .......................30-41

Fluids ................................52-54

Hand & Power Tools ...............60-63

Machine Tool Accessories ........ 8-18

Machinery...........................19-29

Material Handling & Storage ....64-67

Measuring Tools ...................42-51

Raw Materials ......................68-69

Shop Supplies/Electrical/HVAC ..70-79

Spotlight on Savings .................2-7

Die Grinders

Straight Die Grinder

90° Angle Die Grinder

Pencil Die Grinder

All have:• Rear exhaust • 4 CFM @ 90 PSI • 1⁄4" NPT air inletStraight & 90° Angle Die Grinder• Rotating air inlet • Low noise 77 dB (A) • 1⁄4" collet • 3⁄8" hose • Comfort cushioned grip • New regulator—easy-to-set RPMPencil Die Grinder• 1⁄8"/5mm collet

Low Description RPM Length Model # Price Straight Die Grinder 25,000 61⁄8" MN404-0041 $59.95 90° Angle Die Grinder 20,000 65⁄8 MN404-0042 79.95 Pencil Grinder 54,000 51⁄4 MN411-1101 79.95 3 Pc. Grinder Combo (one of each listed above) MN414-2283 159.00 *S&H charges apply

2-YEARWARRANTY

BONUS*Tool Bag

Included with Grinder Combo

3 Pc. ComboOnly

$159

1⁄4" Rear Exhaust Straight Die Grinder• Ideal for cylinder work and high speed grinding• Ball-bearing construction assures long life • 22,000 RPM • 4 CFM average air consumption • 63⁄4" longModel # MN414-2153Reg. Price $36.60 Sale Price $24.951⁄4" Rear Exhaust Angle Die Grinder • Lever throttle • Hardened gearing• 22,000 RPM • 3⁄8"-24 spindle • 43⁄4" long• 4 CFM average air consumption • Wt.: 1.75 lbs.Model # MN414-2152Reg. Price $45.76 Sale Price $29.951⁄4" Front Exhaust Straight Handle Grinder• Mini design for better handling • Features a smaller diameter than other die grinders• 25,000 RPM • 4 CFM • Size: 43⁄4L x 11⁄4"W • Wt.: 3⁄4 lbs.Model # MN414-2156Reg. Price $35.86 Sale Price $24.951⁄4" Front Exhaust Right Angle Grinder• Lever throttle • Hardened gearing• 22,000 RPM • 4 CFM • Size: 51⁄2L x 13⁄4"W • Wt.: 14 oz.Model # MN414-2155Reg. Price $56.82 Sale Price $29.95

Pneumatic Grinders

FOR FREE SHIPPING ON YOUR ORDER OF $29.00 OR MORE!By Phone: Give the promo code to your friendly Enco Sales Associate. Online: Enter the promo code on the shopping cart page and click apply.

HURRY! Expires August 31, 2015* Valid only on orders shipped within the contiguous 48 United States. Offer only applies to Standard UPS Ground Shipping Service. 125 lb. weight limit. Cannot be combined with any other offer.

FREE UPS SHIPPING!On all orders over $29

USE PROMO CODE: AUGUPS

02-03 HD 15-08.indd 202-03 HD 15-08.indd 2 7/15/15 8:00 AM7/15/15 8:00 AM




















http://WWW.USE-ENCO.COM

Spotlight on Hand & Power Tools

3INTERNET: use-enco.com FAX: 800-965-5857

Hex Key Sets• Precision tolerances • Heat- treated alloy steel fi nish • Includes plastic holder

No. of Ball End Reg. Sale L Wrench Reg. Sale Pcs. Sizes Model # Price Price Model # Price Price Metric 9 1.5-10mm MN411-1921 $12.85 $7.95 MN411-1918 $7.97 $5.95 Inch 13 .050-3⁄8" MN411-1920 14.69 8.95 MN411-1916 8.38 6.95 Inch & Metric 22 .050-3⁄8", 1.5-10mm MN411-1922 25.68 13.95 MN411-1919 15.16 11.95

MFR'S LIFETIMEWARRANTY

Starting At

$595

22 Pc. Ball End Set

Starting At

$2595

• Handle and blade are welded together for superior strength

• Comfort grip handles are ergonomically shaped for comfort and control

• Custom steel is up to 20% stronger than competitors

• 6" arm length• Exclusive PTFE gray fi nish offers

superior corrosion protection

10 Pc. Inch

T-Handle Hex Key Sets

8 Pc. Metric

No. of Reg. Sale Pcs. Sizes Model # Price Price 8 2, 2.5, 3-6, 8, 10mm MN411-2024 $27.41 $25.95 10 3⁄32-3⁄8" MN411-2023 32.11 29.95



• 6, 8, 10" Black oxide• Hot forged from

chrome-vanadium steel• Laser-marked jaw scale

for easy identifi cation• Wide jaw opening • Thick handle provides comfort• Non-protruding on the

movable jaw end for greater ease in tight spaces

3 Pc. Adjustable Wrench Set

Only

$2595Model # MN712-8054

Mini Impact Wrenches

• Ergonomic design for comfort, reduces fatigue

• Durable jumbo hammer mechanism

• Variable speed control and reverse settings

• 4.7" overall length3⁄8" Impact Wrench• 300 ft./lbs. maximum torque• 500 ft./lbs. breakaway torque • 6500 RPM free speedModel # MN414-2284 Reg. Price $181.40 Sale Price $118.951⁄2" Impact Wrench• 500 ft./lbs. maximum torque • 700 ft./lbs. breakaway torque• 10,000 RPM free speedModel # MN414-2285Reg. Price $190.00 Sale Price $128.95

Fits into tight spaces standard wrenches cannot

As Low As

$11895


Punch & Chisel Sets

Shaped and Polished Ends 12 Pc. SetIncludes:• 3 center punches: 1⁄16, 1⁄4 and 5⁄16"• 5 pin punches: 1⁄8, 5⁄32, 3⁄16, 1⁄4, 5⁄16"• 3 cold chisels: 3⁄8, 1⁄2, 3⁄4"• 3⁄8" prick punch • Canvas rollModel # MN411-2033Reg. Price $18.73 Sale Price $17.95

26 Pc. SetIncludes:• 2 center punches: 3⁄8, 1⁄2"• 5 starter punches: 3⁄32, 1⁄8, 3⁄16, 7⁄32, 1⁄4"• 6 drive pin punches: 3⁄32, 1⁄8, 5⁄32, 3⁄16, 7⁄32, 1⁄4"• 3 drifts: 1⁄8, 3⁄16, 1⁄4"• 9 cold chisels: 1⁄4, 5⁄16, 3⁄8, 1⁄2, 5⁄8, 3⁄4, 7⁄8, 1, 13⁄16"• 5⁄16" prick punch • PouchModel # MN414-2286Reg. Price $131.09 Sale Price $109.95

02-03 HD 15-08.indd 302-03 HD 15-08.indd 3 7/15/15 8:00 AM7/15/15 8:00 AM














http://WWW.USE-ENCO.COM

The RIGHT TOOL at the RIGHT PRICE The RIGHT TOOL at the RIGHT PRICE4

Spotlight on Cutting Tools

For general-purpose drilling in a wide variety of materials where extra length is needed. • Supplied with metal stand

HSS Aircraft Extension Drill Sets

13 Pc. Set

No. of Reg. Sale Pcs. Sizes OAL Model # Price Price 13 1⁄8-1⁄2" x 32nds 8" MN337-2816 $120.16 $99.00 13 1⁄8-1⁄2 x 32nds 10 MN337-2817 132.98 109.00 11 3⁄16-1⁄2 x 32nds 18 MN337-2819 283.33 225.00

Starting At

$99

SAVEUP TO

20%

HSS Double End Mills2 Flute Centercutting & 4 Flute

2 Flute • Centercutting design with good chip removal capability • Use for milling slots, pockets and for plunge cutting in a

wide variety of materials4 Flute• Recommended for fi nishing operations in a wide range

of ferrous and nonferrous materials

As Low As

$995 Mill Shank 2 Flute Reg. Sale 4 Flute Reg. Sale Dia. Dia. LOC OAL Model # Price Price LOC OAL Model # Price Price 1⁄8" 3⁄8" 3⁄8" 31⁄16" MN337-5212 $14.94 $9.95 3⁄8" 31⁄16" MN337-5465 $15.18 $9.95 3⁄16 3⁄8 7⁄16 31⁄8 MN337-5218 14.94 9.95 1⁄2 31⁄4 MN337-5471 15.18 9.95 1⁄4 3⁄8 1⁄2 31⁄8 MN337-5224 15.18 9.95 5⁄8 33⁄8 MN337-5477 14.94 9.95 5⁄16 3⁄8 9⁄16 31⁄8 MN337-5228 14.94 9.95 3⁄4 31⁄2 MN337-5481 14.94 9.95 3⁄8 3⁄8 9⁄16 31⁄8 MN337-5232 15.18 9.95 3⁄4 31⁄2 MN337-5485 14.94 9.95 7⁄16 1⁄2 13⁄16 33⁄4 MN337-5236 22.92 14.95 1 41⁄8 MN337-5489 21.56 14.95 1⁄2 1⁄2 13⁄16 33⁄4 MN337-5240 22.92 14.95 1 41⁄8 MN337-5493 21.56 14.95 5⁄8 5⁄8 11⁄8 41⁄2 MN337-9145 31.71 22.85 13⁄8 5 MN337-5497 31.25 22.49 3⁄4 3⁄4 15⁄16 5 MN337-5248 40.04 28.85 15⁄8 55⁄8 MN337-5501 39.47 28.00

SAVEUP TO

34%

Uncoated TiN Coated TiAIN Coated Mill Shank Flute 2 Flute 4 Flute Reg. Sale 2 Flute 4 Flute Reg. Sale 2 Flute 4 Flute Reg. Sale Dia. Dia. Length OAL Model # Model # Price Price Model # Model # Price Price Model # Model # Price Price 1⁄8" 1⁄8" 1⁄2" 11⁄2" MN322-5008 MN322-6008 $5.30 $4.69 MN322-5108 MN322-6108 $6.77 $5.99 MN619-1436 MN308-0539 $6.86 $6.49 3⁄16 3⁄16 5⁄8 2 MN322-5012 MN322-6012 7.42 6.99 MN322-5112 MN322-6112 9.09 7.99 MN619-1437 — 9.61 8.49 1⁄4 1⁄4 3⁄4 21⁄2 MN322-5016 — 8.93 8.49 MN322-5116 MN322-6116 11.80 8.99 MN619-1435 MN308-0542 12.19 10.29 5⁄16 5⁄16 13⁄16 21⁄2 MN322-5020 MN322-6020 12.54 11.29 MN322-5120 MN322-6120 16.41 13.99 MN619-1439 MN308-0543 17.38 14.99 3⁄8 3⁄8 7⁄8 21⁄2 MN322-5024 MN322-6024 15.63 13.99 — MN322-6124 19.79 15.99 MN619-1443 — 21.89 20.79 1⁄2 1⁄2 1 3 MN322-5032 MN322-6032 25.01 23.75 MN322-5132 MN322-6132 30.61 23.99 MN619-1434 — 32.65 27.75 5⁄8 5⁄8 11⁄4 31⁄2 MN322-5040 — 48.25 45.79 MN322-5140 MN322-6140 57.74 47.99 MN619-1440 MN308-0546 63.20 56.79 3⁄4 3⁄4 11⁄2 4 MN322-5048 MN322-6048 70.73 67.19 MN322-5148 MN322-6148 83.02 64.99 MN619-1438 MN308-0547 92.69 79.95

SAVEUP TO

28%

2 & 4 Flute Carbide Single End MillsUncoated, TiN Coated & TiAlN Coated

Regular Length • Centercutting • Solid micrograin carbide

Uncoated TiAIN CoatedTiN Coated

As Low As

$469

Mill Shank Flute 2 Flute 4 Flute Low Dia. Dia. Length OAL Model # Model # Price 1⁄8" 1⁄8" 3⁄4" 21⁄4" MN323-5100 MN323-5200 $9.95 1⁄8 1⁄8 1 3 MN890-9957 — 9.95 5⁄32 5⁄32 3⁄4 2 MN325-2254 MN325-2261 14.95 3⁄16 3⁄16 1 2 MN325-2255* MN325-2262 11.95 3⁄16 3⁄16 11⁄8 3 MN890-9958 — 10.95 1⁄4 1⁄4 11⁄8 3 MN323-5104 MN323-5204 12.95 1⁄4 1⁄4 11⁄2 4 — MN891-4642 13.95 3⁄8 3⁄8 11⁄8 3 — MN323-5208 18.95 3⁄8 3⁄8 13⁄8 21⁄2 MN325-2258 MN325-2267 27.95 3⁄8 3⁄8 13⁄4 4 — MN891-4643 20.95 1⁄2 1⁄2 11⁄2 3 MN325-2259 MN325-2269 29.95 1⁄2 1⁄2 2 4 MN323-5112 MN323-5212 29.95 1⁄2 1⁄2 3 6 MN890-9961 MN891-4644 43.95 5⁄8 5⁄8 21⁄4 5 — MN323-5214 75.95 3⁄4 3⁄4 21⁄4 5 MN323-5116 MN323-5216 99.95 1 1 21⁄4 5 — MN323-5218 170.95*Overall length: 21⁄2"

2 & 4 Flute Carbide Single End MillsLong & Extra Long Lengths

• Centercutting• Solid micrograin carbide

Starting At

$995

04-05 HD 15-08 SpotCT.indd 404-05 HD 15-08 SpotCT.indd 4 7/15/15 8:00 AM7/15/15 8:00 AM

























































































PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com 5

Spotlight on Cutting ToolsCarbide Double End Mills2 & 4 Flute Centercutting • Uncoated, TiN & TiAlN Coated

Stub & Regular Length • Higher rake and 30° helix angle

TiN Coated• General-purpose use • Extends tool life • Used for aggressive machining of steels• Provides increase of 25 to 30% in machining

speeds vs. uncoated tools

TiAIN Coated (Titanium Aluminum Nitride)• Recommended for diffi cult-to-machine materials• Used for aggressive machining of stainless steels,

high-alloy carbon steels, nickel-based, high-temperature alloys and titanium alloys

• Provides increase of 75 to 100% in machining speeds vs. uncoated tools

TiN Coated

TiAlN Coated

Uncoated

As Low As

$969 Mill Shank Uncoated Low TiN Coated Low TiAlN Coated Low Dia. Dia. LOC OAL Model # Price Model # Price Model # Price 2 Flute 1⁄16" 1⁄8" 1⁄8" 11⁄2" MN322-7004 $9.99 MN326-0172 $13.79 MN317-4637 $12.49 1⁄8 3⁄16 1⁄4 2 MN326-1838 11.99 MN325-2567 9.70 MN317-4640 10.50 1⁄8 3⁄8 3⁄8 31⁄16 MN325-2485 24.39 MN326-0163 29.95 MN317-4628 33.07 3⁄16 3⁄16 3⁄8 2 MN322-7012 11.99 MN325-2568 12.99 MN317-4641 14.07 1⁄4 1⁄4 1⁄2 21⁄2 MN322-7016 13.99 MN325-2569 18.69 MN317-4639 20.27 1⁄4 3⁄8 5⁄8 31⁄2 MN325-2488 24.39 MN326-0166 37.95 MN317-4635 43.37 5⁄16 5⁄16 1⁄2 21⁄2 MN322-7020 17.99 MN326-0176 24.49 MN317-4643 24.79 3⁄8 3⁄8 3⁄4 31⁄2 MN325-2490 28.02 MN326-0168 34.95 MN317-4636 38.94 1⁄2 1⁄2 5⁄8 3 MN322-7032 31.99 MN326-0179 49.95 MN317-4638 59.77 4 Flute 1⁄16 1⁄8 1⁄8 11⁄2 MN322-8004 9.69 MN890-9641 13.95 MN308-0204 11.79 1⁄8 3⁄16 1⁄4 2 MN326-0049 11.99 MN891-7053 9.99 MN308-0205 10.49 1⁄8 3⁄8 3⁄8 31⁄16 MN325-2493 23.99 MN325-2561 30.99 MN619-1466 28.79 3⁄16 3⁄16 3⁄8 2 MN322-8012 11.99 MN891-7054 12.99 MN308-0206 13.99 1⁄4 1⁄4 1⁄2 21⁄2 MN322-8016 15.99 MN891-7055 18.99 MN308-0207 18.99 1⁄4 3⁄8 5⁄8 31⁄2 MN325-2497 23.99 MN325-2563 38.95 MN619-1470 38.99 5⁄16 5⁄16 1⁄2 21⁄2 MN322-8020 19.99 MN890-9642 24.99 MN619-1472 23.99 3⁄8 3⁄8 3⁄4 31⁄2 MN325-2499 30.99 MN325-2564 36.95 MN317-4670 37.99 1⁄2 1⁄2 5⁄8 3 MN322-8032 35.99 MN891-7057 54.99 MN308-0209 39.99

Long & Extra-Long Carbide End Mills4 Flute Centercutting • Uncoated & AlTiN Coated

AlTiN Coated• Recommended for diffi cult-to-machine materials• Used for aggressive machining of aircraft/aerospace materials,

stainless steels, high-alloy carbon steels, nickel-based, high-temperature alloys and titanium alloys

Uncoated AlTiN Coated

As Low As

$995

Mill Shank Uncoated Low AlTiN Coated Low Dia. Dia. LOC OAL Model # Price Model # Price

1⁄8" 1⁄8" 3⁄4" 21⁄4" MN323-5200 $9.95 MN619-1452 $17.47 1⁄8 1⁄8 1 3 MN891-4640 11.97 MN619-1460 14.86 3⁄16 3⁄16 3⁄4 21⁄4 MN323-5202 14.57 MN619-1453 16.74 3⁄16 3⁄16 11⁄8 3 MN891-4641 13.22 MN619-1461 16.75 1⁄4 1⁄4 11⁄8 3 MN323-5204 12.95 MN619-1451 22.84 1⁄4 1⁄4 11⁄2 4 MN891-4642 13.95 MN619-1459 22.62 3⁄8 3⁄8 11⁄8 3 MN323-5208 18.95 MN619-1454 29.75 3⁄8 3⁄8 13⁄4 4 MN891-4643 20.95 MN619-1462 33.35 1⁄2 1⁄2 2 4 MN323-5212 29.95 MN619-1450 44.15 1⁄2 1⁄2 3 6 MN891-4644 43.95 MN619-1458 63.60

Mill Shank 2 Flute 4 Flute Reg. Sale Dia. Dia. LOC OAL Model # LOC OAL Model # Price Price 1⁄8" 3⁄8" 3⁄8" 25⁄16" MN320-0010 3⁄8" 25⁄16" MN320-0510 $7.15 $5.95 3⁄16 3⁄8 7⁄16 25⁄16 MN320-0020 1⁄2 23⁄8 MN320-0520 7.15 5.95 1⁄4 3⁄8 1⁄2 25⁄16 MN320-0030 5⁄8 21⁄2 MN320-0530 7.15 5.95 1⁄2 3⁄8 13⁄16 21⁄2 MN320-0090 1 211⁄16 MN320-0590 9.77 7.95 1⁄2 1⁄2 1 3 MN320-0100 11⁄4 31⁄4 MN320-0600 9.77 7.95 9⁄16 1⁄2 11⁄8 31⁄8 MN320-0110 13⁄8 33⁄8 MN320-0610 12.45 8.95 5⁄8 1⁄2 11⁄8 31⁄8 MN320-0120 13⁄8 33⁄8 MN320-0620 13.66 9.95 5⁄8 5⁄8 15⁄16 37⁄16 MN320-0130 15⁄8 33⁄4 MN320-0630 14.92 10.95 3⁄4 3⁄4 15⁄16 37⁄16 MN320-0180 15⁄8 33⁄4 MN320-0680 17.01 11.95 1 3⁄4 11⁄2 31⁄2 MN619-2532 17⁄8 41⁄8 MN320-0780 24.25 16.95

2 & 4 Flute HSS End Mills

For general-purpose applications.2 Flute• Allows maximum space for chip evacuation• Longer length of cut for greater depth capacity4 Flute• General-purpose work, including cam milling, die sinking and slot milling• Excellent for use in fi nishing operations • Allows for higher feed rates

As Low As

$595

Thread H No. of Price Each Size Limit Flutes OAL Model # 1-11 12+ 2-56 H2 2 13⁄4" MN312-1501 $4.70 $2.92 4-40 H2 2 17⁄8 MN312-1541 2.96 2.10 8-32 H2 2 21⁄8 MN891-4898 2.92 2.40 10-32 H2 2 23⁄8 MN891-4900 2.92 2.40 1⁄4"-28 H2 2 21⁄2 MN326-1640 3.58 2.17 5⁄16-18 H3 2 223⁄32 MN312-1021 2.74 1.79 5⁄16-24 H3 2 223⁄32 MN312-1031 2.74 2.02 3⁄8-16 H3 3 215⁄16 MN312-1041 3.13 2.21 3⁄8-24 H3 3 215⁄16 MN312-1051 3.48 2.47 1⁄2-13 H3 3 33⁄8 MN312-1081 5.27 4.16 1⁄2-20 H3 3 33⁄8 MN312-1091 6.56 4.16

HSS Spiral Point TapsPlug Style • Ground Threads

Spiral point taps are the most effi cient, rigid and useful cutting taps and are recommended for through holes in most materials. Plug style taps have up to fi ve chamfer threads.

Starting At

$179

SAVEUP TO

35%

04-05 HD 15-08 SpotCT.indd 504-05 HD 15-08 SpotCT.indd 5 7/15/15 8:01 AM7/15/15 8:01 AM










































































































http://use-enco.com


Spotlight on Cutting Tools

*OAL: 33⁄4"

Coarse Tooth• Best for heavy cuts, deep slotting

and pocketing • Excellent in mild steels

Fine Tooth• For profi ling, shallow slots• For harder metals like stainless

steel, Inconel and mold steels

Mill Shank No. of Coarse Tooth Fine Tooth Reg. Sale Dia. Dia. LOC OAL Flutes Model # Model # Price Price

1⁄4" 3⁄8" 5⁄8" 27⁄16" 3 MN320-7110 MN320-7410 $16.27 $13.95 5⁄16 3⁄8 3⁄4 21⁄2 3 MN320-7120 MN320-7420 16.42 13.95 3⁄8 3⁄8 3⁄4 21⁄2 4 MN320-7130 MN320-7430 16.42 13.95 1⁄2 1⁄2 11⁄4 31⁄4 4 MN320-7140 MN320-7440 21.54 16.95 1⁄2 1⁄2 2 4 4 MN619-2438 MN321-1540 28.70 19.95 5⁄8 5⁄8 15⁄8 33⁄4 4 MN320-7150 MN325-4059 26.12 21.95 3⁄4 3⁄4 15⁄8 37⁄8 4 MN320-7170 MN320-7475* 29.99 25.95 3⁄4 3⁄4 3 51⁄4 4 MN321-1570 MN619-2439 39.25 29.95 7⁄8 3⁄4 17⁄8 41⁄8 5 MN320-7180 MN319-1717 43.02 33.95 1 1 2 41⁄2 5 MN320-7210 MN325-4065 45.13 38.95 1 1 3 51⁄2 5 MN619-2440 MN325-4025 57.78 49.95

Coarse Fine

M-42 Cobalt Roughing End MillsSAVE

UP TO

30%

Mill Shank Reg. Sale Dia. Dia. LOC OAL Model # Price Price2 Flute 1⁄8" 3⁄8" 3⁄8" 31⁄16" MN320-1010 $9.65 $6.99 5⁄32 3⁄8 7⁄16 31⁄8 MN320-1020 10.25 6.99 3⁄16 3⁄8 7⁄16 31⁄8 MN320-1030 9.65 6.99 1⁄4 3⁄8 1⁄2 31⁄8 MN320-1050 9.80 6.99 5⁄16 3⁄8 9⁄16 31⁄8 MN320-1070 9.65 6.99 3⁄8 3⁄8 9⁄16 31⁄8 MN320-1090 9.80 3.99 13⁄32 1⁄2 13⁄16 33⁄4 MN320-1100 15.56 6.79 7⁄16 1⁄2 13⁄16 33⁄4 MN320-1110 14.81 9.99 1⁄2 1⁄2 13⁄16 33⁄4 MN320-1130 14.81 9.99 5⁄8 5⁄8 11⁄8 41⁄2 MN320-1150 20.50 13.99 5⁄8 5⁄8 2 41⁄8 MN320-1330 16.34 4.99 11⁄16 3⁄4 15⁄16 5 MN320-1160 25.88 10.99 3⁄4 3⁄4 15⁄16 5 MN320-1170 25.88 16.99 13⁄16 7⁄8 19⁄16 51⁄2 MN320-1180 32.58 14.99 11⁄8 3⁄4 15⁄8 37⁄8 MN320-0300 41.95 18.99 11⁄4 3⁄4 15⁄8 37⁄8 MN320-0330 46.06 18.99 4 Flute 1⁄8 3⁄8 3⁄8 31⁄16 MN320-1510 9.80 6.99 5⁄32 3⁄8 7⁄16 31⁄8 MN320-1520 10.25 6.99 3⁄16 3⁄8 1⁄2 31⁄4 MN320-1530 9.80 6.99 7⁄32 3⁄8 9⁄16 31⁄4 MN320-1540 10.25 6.99 1⁄4 3⁄8 5⁄8 33⁄8 MN320-1550 9.65 6.99 5⁄16 3⁄8 3⁄4 31⁄2 MN320-1570 9.65 6.99 7⁄16 1⁄2 1 41⁄8 MN320-1610 13.93 9.99 5⁄8 5⁄8 13⁄8 5 MN320-1650 20.20 13.99 3⁄4 3⁄4 15⁄8 55⁄8 MN320-1670 25.51 16.99

2 Flute• Centercutting• Good chip removal• Use for milling slots,

pockets and for plunge cutting in a wide variety of materials

4 Flute• Noncentercutting• 30° helix

2 & 4 Flute HSS Double End Mills

2 Flute

4 Flute

Starting At

$399SAVE

UP TO

69%

SAVE10%

On Boring Bars

Carbide Inserts Insert Sale Price Ea. Style Model # 1-9 10+ Grade I22 TPMR321 MN325-7143 $4.63 $4.49 TPMR322 MN422-2787 4.63 4.49 Grade TCN55 TPMR321 MN891-4889 6.57 6.19 TPMR322 MN891-4890 6.57 6.19 TPMR323 MN422-2786 6.57 6.19 TPMR730 MN422-2785 9.43 9.09 TPMR731 MN422-2783 9.43 9.09

Dist. Across Workpiece Use Low Flats Min. Bore Dia. OAL Insert Model # Price 3⁄8" .400" 5" TPMR 730, 731 MN328-6180 $60.34 1⁄2 .550 6 TPMR 730, 731 MN328-6181 64.03 5⁄8 .700 7 TPMR 321, 322, 323 MN328-6182 73.83 3⁄4 .800 8 TPMR 321, 322, 323 MN328-6183 79.93 1 1.070 9 TPMR 321, 322, 323 MN328-6184 84.84 5 Pc. Set of Above MN328-6185 100.60

• Rigidity of tool increased by the unique positive clamping position• Positive cutting angle with chipbreaker• Includes hex key wrenchUses standard TPMR carbide inserts (sold separately).

Mecabore-Style Boring Bars & Set

10 Inserts Per Pkg.

5 Pc. Set

Low PriceModel # MN328-6185

$10060Import Accessories

SAVE37%14 Pc.

HSS Chucking Reamer Set

• Straight shank, straight fl ute

• .124-.501" Over/Under

• Includes pouch


$9595Regular Price: $152.56

06-07 HD 15-08 SpotCT_MTA.indd 606-07 HD 15-08 SpotCT_MTA.indd 6 7/15/15 8:01 AM7/15/15 8:01 AM
































































Spotlight on Machine Tool Accessories

7

5C Spin-IndexDesigned to extend the work capabilities of surface grinders, drill presses and all types of milling machines.• Accepts 5C collets to 11⁄8" capacity• Indexing plate with precise 36-hole pattern• 10 vernier holes for 1° indexing• Spindle travels 21⁄16" for fl ute grinding• Hardened and ground spindle with lock

Tolerances:Dividing spindle concentricity .0004"Cylindrical center bore (per 1") concentricity .0012Spindle center line parallelism to base .0008



• 24-position hardened and ground index plate with six masking plates for rapid indexing for divisions of 2, 3, 4, 6, 8 and 12

• 10-second vernier reading • Remove chuck to use as horizontal/vertical rotary table

• 360° graduation ring • Includes scroll chuck with faceplate and 2 pc.

reversible jaws• Center ht.: 6.100" • Faceplate: 10" • Wt.: 166 lbs.

8" Super Spacer

Indexing Accuracy: 3 min. max.Indexing Repeatability: 30 sec.Squareness Base to Chuck: .0012" max.Parall. of Chuck Face to Base: .0008"Concent. of Mounting Flange: .0008"

Specifications:


$995Regular Price: $1,198.78

Jaw Jaw Jaw Wt. Low W Open. Depth Ht. Lbs. Model # Price 3" 23⁄4" 1" 43⁄4" 12.6 MN404-1676 $43.00 4 31⁄2 1.188 5 17.9 MN404-1677 49.00 5 55⁄16 15⁄16 55⁄16 23.8 MN404-1678 69.00 6 53⁄4 11⁄2 61⁄4 36.8 MN404-1679 89.00

• Used where quick and precise X and Y axis positioning is required• Often used on a drill press to recreate lateral and cross travel of a

milling machine• Suitable for clamping soft materials like wood, aluminum and copper• Ball-crank handles• Three bolt legs on each side of the base to match most table confi gurations

As Low As

$43

Cross Slide Vises

• Made from FC25, fi ne-grain, cast-iron, trapezoidal-thread lead screw• Replaceable, smooth jaw plates constructed

of hardened and ground tool steel• Bend and base are parallel to 0.002" • Jaw surface is square to 0.0015"• Less than 0.001" jaw defl ection at 4000 lbs. clamping pressure• 7.5" jaw opening • 1.75" jaw depth • 4.625" height • 18.5" OAL • Wt.: 78 lbs.

6" Lock-Down Machine ViseAssures the Movable Jaw Won’t Lift



Angle Tight II Precision CNC Machine Vise• Excellent for use

with multiple vise setups

• Special design allows mounting upright or sideways

• Thrust bearing increases clamping power by 80%• Spherical segment facilitates multi-directional

alignment, eliminating jaw lift and work tilt • Rigid body is built from 80,000 psi ductile iron • 6W x 13⁄4"H with

57⁄8" jaw opening • 5H x 171⁄2"L

overall • Wt.: 75 lbs.

SAVE16%



3 Jaw Plain BackSelf-Centering Scroll Lathe ChucksSemi-Steel Body

Models w/Hardened Solid Jaws include:• Scroll and jaws hardened and ground • Hard top jaws and master jaws • Chuck wrench • Set of mounting screws

Chuck Runout Thru Approx. Low Dia. Radial Axial Hole Wt. Lbs. Model # Price Hardened Solid Jaws 3" .0012" .0012" .629" 4 MN328-0327 $180.00 4 .0012 .0012 .866 7 MN328-0408 196.00 5 .0012 .0012 1.181 11 MN328-0410 210.00 6 .0012 .0012 1.575 19 MN328-1316 229.00 8 .0016 .0016 2.559 34 MN328-0426 280.00 10 .0016 .0016 3.149 57 MN328-0427 393.00 Hardened Reversible Jaws 61⁄4 .0012 .0012 1.575 20 MN328-0321 280.00 8 .0016 .0016 2.559 31 MN328-0322 337.00 10 .0016 .0016 3.149 51 MN328-0323 486.00 12 .0024 .0024 3.937 101 MN328-0325 719.00

Starting At

$180

NEWLOW

PRICES

Models w/Reversible Jaws include: • 2 sets of hard solid jaws for internal and external holding• Balanced scroll jaws made of fi ne alloy steelChuck Adapter Required.

06-07 HD 15-08 SpotCT_MTA.indd 706-07 HD 15-08 SpotCT_MTA.indd 7 7/15/15 8:02 AM7/15/15 8:02 AM



















http://use-enco.com

The Lowest Prices in the


Vises & Clamps

SAVEUP TO

30%

Milling Machine Vises• 6" vise: bed height matched to size 2.875" ±.0005"• 8" vise: bed height matched to size 3.310" ±.0005"• Rigid main screw design allows for higher

torque loads and clamping force• Repeatability within .001"• Hardened vise bed and jaw plate• Limited lifetime warranty

Vise Jaw Jaw Jaw Max. Clamp. Wt. Mfr’s Sale Size Width Ht. Opening W Ht. OAL Force Lbs. Model # List Price 6" 6" 1.75" 9" 83⁄4" 4.62" 17.2" 8200 lbs. 75 MN308-0101 $485.00 $409.00 8 8 2.20 11 111⁄2 5.51 21.81 12,000 210 MN328-0172 1,465.00 999.95

Starting At

$409Double Direction Precision Machine Vise



SAVE35%

• Designed for medium- to high-volume CNC production

• Anti-tilt mechanism eliminates lift of movable jaw

• Vise body is precision ground and the height matched within +0

• Ductile cast-iron body, hardened upper guide surface improves rigidity and wear resistance

• 6" jaw width • 4" jaw opening• 5" OAH • 24" OAL • 11⁄2" jaw height• Wt.: 110 lbs.

Can be used in horizontal, vertical and longitudinal positions.• Cast-iron body and slide are machined

perfectly parallel and square to ensure complete alignment of jaw

• Main screw, handle and jaw plate are made ofhigh-quality steel • Acme thread screw withhexagonal head for tight clamping

• Stationary jaw has a vertical andhorizontal 90° V-groove

Jaw Jaw Jaw Approx. Reg. W Opening Depth OAL Wt. Lbs. Model # Price 21⁄2" 21⁄2" 11⁄2" 71⁄4" 6 MN426-8005 $31.18 31⁄2 31⁄8 11⁄2 91⁄4 91⁄2 MN891-5931 33.98

Your Choice

$2495

Drill Press Vises

Swivel Base Vises

Multi-Purpose Bench Vise• 51⁄4" jaw opening • 5" jaw width • 183⁄4" OAL• 85⁄8" height • 3⁄8" minimum pipe capacityMfr’s # 69999

Model # MN405-0705Mfr’s List: $256.00 Sale Price $199

Multi-Purpose Mechanic’s Vises• Heavy duty – 30,000 psi rated• Hardened steel top and pipe jaws• Large anvil work surface• Swivel bar rotates 360° and has double

lockdown for maximum stability• Powder coat paint resists scratches

Jaw Jaw Throat Capacity Wt. Mfr’s Sale Open. W Depth Min. – Max. Lbs. Mfr’s # Model # List Price 41⁄2" 4" 37⁄16" 1⁄4 – 2" 38 744 MN319-3258 $250.00 $139.00 51⁄4 5 33⁄4 1⁄4 – 21⁄2 52 745 MN319-3256 350.00 249.00 53⁄4 6 41⁄8 1⁄4 – 31⁄2 64 746 MN319-3259 450.00 299.00 81⁄4 8 43⁄4 1⁄4 – 31⁄2 89 748A MN319-3257 650.00 449.00

Industrial Vises

Jaw Jaw Capacity Wt. Mfr’s Sale Open. W Min. – Max. Lbs. Mfr’s # Model # List PriceUtility 4" 41⁄2" 1⁄8 – 2" 16 674 MN240-2982 $140.00 $69.95 5 51⁄2 1⁄8 – 21⁄2 35 675 MN426-1020 180.00 89.95 51⁄2 61⁄2 1⁄8 – 21⁄2 44 676 MN426-1022 240.00 109.00 6 6 1⁄8 – 3 66 656HD MN426-1024 320.00 199.00 71⁄2 8 1⁄8 – 3 80 648HD MN426-1026 450.00 259.00Tradesman 4 41⁄2 1⁄4 – 21⁄2 42 63199 MN426-1010 640.00 369.00 5 51⁄2 3⁄8 – 3 53 1755 MN426-1012 780.00 449.00 61⁄2 61⁄2 3⁄8 – 31⁄2 72 1765 MN426-1014 870.00 529.00 7 8 1⁄8 – 31⁄2 109 1780A MN240-2981 1,300.00 799.00

Utility

Tradesman

Starting At

$139

Starting At

$6895Tradesman Vises• 60,000 psi ductile iron body parts• Hardened steel top and pipe jaws• Round, lathe-turned slide bar• Precision thrust bearing

Utility Workshop Vises• Serrated steel replaceable top jaws• Built-in pipe jaws• Large anvil• Finished in red enamel

SAVEUP TO

54%

Quick-ReleaseWelding Clamps

SAVE10%

For quick clamping, without spinning. Ideal for a wide range of welding and woodworking applications, including inside clamping, clamping of unparallel parts or holding round or odd-shaped parts.Import• Material: Steel • Straight handle• Non-marring pads and cushion handle grip• Press button, slide clamp to desired position,

release button and turn handle to right to tighten clamp jaws

• Load capacity: 200 lbs.Gibraltar• Material: Black oxide fi nish with copper-

plated spindle• Resists welding splatter • T handle• Lift release lever and pull handle to open jaws• Push handle to desired position and fl ip

release lever down to tighten clamp jaws• Load capacity: 1,000 lbs.

Open Closed Max. Throat Throat Reg. Sale Cap. OAL Depth Depth Model # Price PriceImport 5" 12" 21⁄2" 31⁄2" MN308-0336 $19.20 $17.09 61⁄2 131⁄2 21⁄2 4 MN308-0337 22.79 20.49Gibraltar 5 10 21⁄4 3 MN327-0066 20.71 18.59 61⁄2 111⁄2 21⁄4 31⁄2 MN327-0067 24.88 22.39

T handleStraight handle

08-09 HD 15-08 V&C.indd 808-09 HD 15-08 V&C.indd 8 7/15/15 8:02 AM7/15/15 8:02 AM
























Industry GUARANTEED!


Vises & Clamps

• Designed to eliminate distortion and prevent twisting

• High-tensile steel • Built-in “V” blocks • Floating jaws stay parallel • Copper-plated handle, jaws,

and screw ideal for welding use 6 Pc. Set includes: 2 pieces each of the 21⁄2, 41⁄2 and 6" deep throat sizes.

6 Pc. T-Handle Clamp Set



4-in-1 Clamping SystemIncludes Clamp, V-Pad & Extender Block

Clamp Clamping Reg. Sale Size Pressure Model # Price Price 61⁄2" 1000 lbs. MN893-2203 $25.52 $21.95 81⁄2 1200 MN893-2151 30.67 25.95 121⁄2 1200 MN893-2152 36.76 29.95 101⁄2 2400 MN893-2153 49.18 39.95 121⁄2 2400 MN893-2154 73.05 65.95

1. Standard—The sliding arm clamp is 10x faster than a C-clamp!

2. Pipe—Add the exclusive V-Pad to create a pipe clamp!

3. Spreader—Slide the clamp arm OFF and reverse to create a spreader clamp.

4. Step-Over—Add the extender block to create a step-over clamp.

• Push lever to slide clamping arm on and off• Nickel/chrome-plated, heat-treated alloy steel

SAVEUP TO

18%

Starting At

$2195

SAVEUP TO

38%

Max. Nominal Load Stud Clamping Limit Reg. Sale Size Range Length Lbs. Model # Price Price Long for Longer Setups 3⁄8" 0-11⁄4" 31⁄2" 10,000 MN505-4639 $32.38 $23.95 1⁄2 0-21⁄2 53⁄4 12,800 MN505-4641 35.29 25.95 5⁄8 0-31⁄2 63⁄4 18,000 MN505-4643 42.82 28.95 3⁄4 0-5 9 24,000 MN505-4645 62.75 42.95 1 0-5 111⁄8 65,000 MN505-4646 103.11 62.95 Short for Closer Setups 3⁄8 0-1 3 14,000 MN505-4638 31.57 23.95 1⁄2 0-13⁄4 41⁄2 16,800 MN505-4640 34.32 25.95 5⁄8 0-23⁄4 51⁄2 24,000 MN505-4642 41.83 28.95 3⁄4 0-31⁄2 7 35,000 MN505-4644 61.75 42.95

Rite-Hite® Hold-Down Clamps• Instant adjustment up to 5" • Self-positioning • For milling, drilling, stamping, etc. • Use on any machine with a “T”-slot

As Low As

$2395

52 Pc. Combination Steel Step Block & Clamp Sets

Includes:• 24 Studs: 4 pcs. each: 3, 4, 5, 6, 7 & 8" long• 4 coupling nuts • 6 fl ange nuts • 6 T-slot nuts• 6 serrated end clamps • 6 Step blocks• 1 wall holder • Step blocks 1" wide

Stud Thread 1-Slot T-Slot Wt. Reg. Sale Size Size Nut W Lbs. Model # Price Price 3⁄8"-16 7⁄16" 11⁄16" 18 MN400-2438 $112.64 $65.95 3⁄8-16 1⁄2 7⁄8 23 MN400-2501 102.49 59.95 3⁄8-16 9⁄16 7⁄8 23 MN240-7207 115.69 65.95 1⁄2-13 9⁄16 7⁄8 23 MN400-2562 88.28 55.95 1⁄2-13 5⁄8 1 23 MN505-6544* 84.22 44.95 1⁄2-13 11⁄16 11⁄8 27 MN891-5756 97.42 55.95 5⁄8-11 11⁄16 11⁄8 29 MN400-2688 146.14 85.95 5⁄8-11 3⁄4 11⁄4 29 MN400-2751 147.15 79.95*For Bridgeport -type milling machines

Clam

SAVEUP TO

45%

SAVE25%

Parallel Separator

• Spring-loaded parallel separator holds parallels securely in place

• Can be used on vises up to 6" jaw width



SAVEUP TO

43%

Cam Action Drill Press Vises• Applies variable clamping force depending on

the position of the cam locking lever• Quick jaw positioning using slide bar handle• Machined step jaws • Four mounting locations

Jaw Jaw Throat Wt. Mfr’s Sale W Opening D OAL Lbs. Model # List Price 3" 3" 11⁄4" 9" 10 MN240-2899 $214.00 $119.95 4 411⁄16 15⁄16 10 18 MN240-2900 234.00 145.95 6 63⁄16 113⁄16 12 34 MN240-2901 410.00 245.95 8 83⁄16 2 14 51 MN319-3058 510.00 309.95

ATV All Terrain Vise

• Fits standard 2" hitches and includes a hitch pin for added security• Lightweight with an integrated locking carrying handle• Set screws provide a tight fi t in the hitch and reduce vibration

while driving • Water resistant • Large striking anvil • Replaceable jaws with V-grooves for vertical clamping of round objects • Ideal working height doesn’t interfere with truck bed or tailgate

Secure it to your hitch or mount it on your workbench, the ATV is locked, loaded and ready for action.

Additional BracketModel # MN414-0021 Low Price $23.95



08-09 HD 15-08 V&C.indd 908-09 HD 15-08 V&C.indd 9 7/15/15 8:03 AM7/15/15 8:03 AM































http://use-enco.com

FAST & FRIENDLY Customer


Vises & Clamps

SAVE27%

6" Precision Milling Machine Vise with Swivel Base

Includes:• 24 studs: 4 each of 3, 4, 5, 6, 7 & 8" length • 4 coupling nuts • 6 fl ange nuts • 6 T-slot nuts • 6 serrated end clamps • 6 step block pairs (1" width) • Wall holder • T-slot size: 5⁄8" • Stud thread size: 1⁄2"-13• T-slot nut width: 1" • For Bridgeport®-type milling machines

52 Pc. Combination Steel Step Block & Clamp Set

• Removable hinged handle for fast locking• No need to hammer workpiece• Provides better clamping pressure• 61⁄4" jaw opening • Wt.: 95 lbs.

59 Pc. R8 Tooling Package

6 Pc. R8 Collet Set Sale PriceModel # MN209-9020


• Sizes: 1⁄8-3⁄4"

AngLock® Vises

Lock-Down Design

Assures the Movable Jaw

Won’t Lift!

FREEPLUS

D-688

Mfr’s # D-688• Up to 7,968 lbs. clamping force• Vise nut does not extend beyond the end of the vise body• Hardened vise bed and jaw plates, and a semi-hard steel screw • 80,000 psi ductile-iron bodyMfr’s # D-810• Up to 11,596 lbs. clamping force• Stationary jaw has a top-down, four-bolt

design that reduces vibration by 25%. Total disassembly of the vise allowed, without having to remove the body from the machine table

D-810 Jaw Jaw Wt. Low W Opening OAL Lbs. Mfr’s # Model # Price 6" 8.8" 18.74" 78 D-688 MN990-1019 $569.00 8 10 24.185 158 D-810 MN425-7682 1,495.00

Lifetime warranty against manufacturer’s defects

Nominal Clamping Nominal Throat Rail Reg. Sale Press. Capacity Depth L Model # Price PriceRegular Duty 1330 lbs. 0-6" 43⁄4" 6" MN505-4521 $34.48 $27.95 2660 0-8 43⁄4 8 MN505-4522 62.30 52.95 2660 0-12 51⁄2 12 MN505-4524 84.21 63.95 2660 0-20 43⁄4 20 MN505-4525 102.94 81.95Heavy Duty 4880 0-12 7 12 MN505-4526 162.36 125.95

• Movable sliding arm design saves 90% of clamping time vs. “C” clamps

• Rail, fi xed jaws and pressure plate heat-formed in one piece from cold-drawn profi led steel

• Heat-treated, high-carbonacme screw is spatter resistant; no need for copper-coated screws

• Ergonomic Tommy bar forcomfort and safety

• 2660 Clamps have heavy-duty pads

F-Style ClampsSAVE

UP TO

24%Regular Duty

• Excellent workholding tools, clamps adapt to a wide variety of applications

• Forged of high-carbon steel• Hardened rivets• Contoured handles with

orange cushioned grips• Spindles included

Plier Clamps SAVEUP TO

18%

As Low As

$1095 Throat Holding Reg. Sale OAH OAL Depth Cap. Model # Price Price .97" 4.75" .81" 400 lbs. MN505-4618 $12.91 $10.95 1.22 8.38 2.25 1200 MN505-4619 24.39 19.95

Deep Throat Forged C-ClampsWith Perma Pads®

• Drop-forged steel frame with extra-deep throat for maximum clearance

• Acme roll-threaded screws for maximum strength

Nom. Throat Clamp. Screw Mfr’s Sale Cap. D Press. Dia. Model # List Price 0-21⁄8" 21⁄4" 3500 lbs. 9⁄16" MN337-1042 $19.00 $12.95 0-3 21⁄2 3500 9⁄16 MN337-1043 25.00 14.95 0-41⁄2 31⁄4 6200 3⁄4 MN240-0770 37.00 19.95 0-61⁄16 41⁄8 6600 3⁄4 MN240-0771 58.00 29.95 0-81⁄2 5 6900 3⁄4 MN240-0772 72.00 39.95 2-101⁄8 6 8000 3⁄4 MN337-1044 98.00 54.95 2-121⁄4 65⁄16 9300 7⁄8 MN337-1045 156.00 79.95

Starting At

$1295

SAVEUP TO

48%

Super Precision Sine Vise

• Made from fi ne-quality alloy steel, heat treated to 58-62 HRC

• Parallelism and squareness: .0004"• 4" jaw opening • 11⁄4" jaw depth• Overall: 3W x

35⁄8H x 71⁄2"L • Wt.: 17.8 lbs.



10-11 HD 15-08 V&C_MTA.indd 1010-11 HD 15-08 V&C_MTA.indd 10 7/15/15 8:04 AM7/15/15 8:04 AM



















Machine Tool AccessoriesService 800-USE-ENCO


R8 13 Pc. Collet Set & Tool Tray

• Sturdy aluminum casting does not scratch • 2 rows with holes under 1"• Attaches to any milling machine by 2 screws (included)• Design of tray permits dirt and chips to fall through• Dimensions: approximately 14W x 9"D• Includes 1⁄8 to 7⁄8" by 16ths collets • Tray holds 15 collets





Quick and Easy—Just stop, lock, remove and you’re ready to machine!• For CNC or manual lathes whether manually

pulling a bar through a collet/chuck or using a bar puller (fi rst pull for each bar)

• Gage lengths up to 51⁄2" long• Can be used on all stock shapes up to 3" round• Self-centering, unobstructed viewing• Change dull drills (up to 3⁄4" dia.) in your turret• Mill both sides of your

stock without a stop in the way

• Also a ruler for visual reference

C Collet/Chuck StopLathe & Mill Vise Tool SAVE

UP TO

47%

Slotted Angle Plates

• Machined both square and parallel • High-tensile, cast-iron construction

seasoned against distortion• Webbed end machined on edges and

outside surfaces only• Slots are arranged for maximum

clamping versatility

As Low As

$899

For setting up jigs and fi xtures on milling machines, drill presses, planing machines and radial drilling machines.

Open End Reg. Sale Webbed End Reg. Sale W L H Model # Price Price Model # Price Price 31⁄2" 3" 21⁄2" — MN418-4515 $17.06 $8.99 41⁄2 31⁄2 3 — MN418-4520 20.46 10.99 6 5 41⁄2 MN418-4725 $40.79 $23.99 MN418-4525 31.24 17.99 7 51⁄2 41⁄2 MN418-4730 52.25 30.99 MN418-4530 38.06 21.99 8 6 5 — MN418-4535 50.77 29.99 10 8 6 MN418-4745 97.49 56.99 MN418-4540 70.82 40.99 12 9 8 MN418-4750 126.04 73.99 MN418-4545 89.39 52.99

Iron Angle Plates• High-tensile iron castings• Machined plates for general machine

shop or setup work• Precision-ground plates for close

tolerance layout and inspection setup• Two ribs per plate• Plates may be gray or blue

TolerancesMachined: .001" in 6"Precision Ground: .0005" in 6"Squareness : .0050" in 6"Machined Parallelism: .0018" per 6"Precision Ground Parallelism: .0036" per 6"

As Low As

$1595 Angle Precision Plate Wt. Machined Reg. Sale Ground Reg. Sale Size Lbs. Model # Price Price Model # Price Price 4 x 4 x 4" 6 MN418-4320 $18.02 $15.95 MN418-4420 $31.82 $25.95 5 x 5 x 5 11 — MN418-4425 46.15 39.95 6 x 6 x 6 17 — MN418-4430 68.38 54.95 8 x 8 x 8 36 MN418-4335 89.87 79.95 MN418-4435 117.05 105.95 10 x 10 x 10 62 MN418-4340 114.80 105.95 MN418-4440 207.16 189.95 12 x 12 x 12 104 — MN418-4445 288.31 269.95

Ball Bearing Taper Mounted Super Drill Chucks• For extra heavy-duty drilling applications• The ball thrust bearing reduces friction in the

chuck’s closing mechanism, permitting greater tightening on the twist drill shank

• Supplied with a chuck key and an Import R8 shank arbor

Drill Capacity Chuck Range Chuck Reg. Sale Mount Min.-Max. Model Model # Price Price JT2 0-1⁄4" 81⁄2N MN414-0071 $155.13 $124.00 JT2 0-3⁄8 11N MN414-0072 169.90 135.00 JT4 1⁄8-3⁄4 18N MN414-0075 369.06 295.00

Drill Chucks

As Low As

$124

10-11 HD 15-08 V&C_MTA.indd 1110-11 HD 15-08 V&C_MTA.indd 11 7/15/15 8:04 AM7/15/15 8:04 AM


























http://use-enco.com

Machine Tool Accessories


Shop the Enco Master Catalog

18 Pc. 5C Round Collet Set• Hardened and ground throughout• Outside thread: 1.240 x 20 R.H.• Inside thread: 1.047 x 24 R.H.• 1⁄16-11⁄8" x 16ths

SAVEOVER

30%



• Fully adjustable gibs • Table locking screws• Micrometer dials with

friction hold allow dial to be “0” at any point

Heavy-Duty Mill & Drill Table

Specifi cationsHeight: 5"Travel: 11" long, 71⁄2" crossBase: 8 x 101⁄2" with U-slots for bolts up to 5⁄8"Table Dim.: 6 x 181⁄2"T-slots: 9⁄16"Wt.: 56 lbs.



Clamping WedgesDrop Forged C-1020/C-1030 Steel

Thick Low Length Width End Model # Price 3" 1" 1⁄4" MN319-7793 $3.41 5 1 1⁄2 MN319-7794 4.48 6 11⁄4 3⁄4 MN319-7795 5.22 8 15⁄8 11⁄8 MN319-7796 8.67

A MachineShop

Necessity

• Hammer has 3⁄4" socket for loosening the drawbar

• Socket end fi ts other 3⁄4" bolts on vertical mills

Drawbar HammerSAVE

OVER

25%



8 Pc. R8 End Mill Holder Set

• Sizes 5⁄8" and up for single end mills only• Hardened and ground • 8 pc. set includes sizes:

3⁄16, 3⁄8, 1⁄2, 5⁄8, 3⁄4, 7⁄8, 1, 11⁄4"

l SAVE

OVER

10%



SAVEUP TO

32%• 4" table utilizes low-profi le locks for added workspace• 10-second vernier reading • Gear drive immersed in oil• Extra-deep coolant channel • Dual positive-action locks• Satin-chrome dials • 90:1 gear ratio • Low profi le

Accessory Table Reg. Sale Dia. Model # Price Price Tailstocks for Hor./Vert. Tables 8 & 10" MN200-1098 $218.13 $149.00

Rotary Tables

*Ships Truck

Table Ht. O/A Center Morse T-Slot Approx. Reg. Sale Dia. Horiz. Vert. Taper W Wt. Lbs. Model # Price PriceHorizontal/Vertical Rotary Tables 8" 3.94" 5.98" 3 .465" 95 MN200-1143 $455.61 $349.00 10 4.33 6.75 3 .465 137 MN200-1153* 594.12 399.00Horizontal Rotary Tables 6 3.2 — 2 .390 42 MN200-1076 311.97 249.00 8 4.1 — 3 .465 55 MN200-1078 386.37 289.00

Specifi cations Max. Variation Flatness of Clamping Surface (Concave): .0006" Concentricity of Center Bore: .0008" Parallelism of Clamping Surface to Angle Face: .0008" Squareness of Angle Surface to Clamping Surface (Hor./Vert. only): .0004" Squareness of Clamping Surface to Center Slot: .0008" Accuracy: 4, 6 & 8" Table 1 min. 20 sec. 10, 12 & 16" Table 45 sec.

As Low As

$249

12-13 HD 15-08 MTA.indd 1212-13 HD 15-08 MTA.indd 12 7/15/15 8:05 AM7/15/15 8:05 AM














Machine Tool AccessoriesOnline at use-enco.com


SAVEUP TO

25% Power Reg. Sale Feed Axis Model # Price Price Table x MN404-3045 $399.98 $299.95 Cross Saddle y MN404-3046 462.99 349.95 Knee z MN404-3047 455.98 349.95

Specifi cations Speed Range: 1-9"/min. Rapid Traverse: 40"/min. Gearing: Helical

Super Power FeedsFor Bridgeport®-Type Milling Machines• 150 lbs. torque• 110v with manual reset• Auto cutoff • Pilot light

Starting At

$29995

SAVEOVER

15% Range Reg. Sale hp Model # Price Price Medium-Duty 1⁄3-3⁄4 MN297-3510 $129.52 $105.95 3⁄4-11⁄2 MN297-3520 141.29 115.95 1-3 MN297-3530 164.84 135.95 3-5 MN297-3540 188.39 154.95 4-8 MN297-3550 223.71 183.95 Heavy-Duty 1⁄3-3⁄4 MN297-3700 164.84 135.95 3⁄4-11⁄2 MN297-3705 188.39 154.95 1-3 MN297-3715 211.94 173.95 3-5 MN297-3725 270.81 222.95 4-8 MN297-3735 317.91 261.95 8-12 MN297-3745 435.65 358.95 12-18 MN297-3755 724.19 596.95

Static Phase ConvertersRun 3-Phase Equipment From Single-Phase Power• Simple to hook up• Runs at 2⁄3 rated hp• These units are non-returnable.

Ask our technical staff for assistance before ordering

PHASE-A-MATIC™

As Low As

$10595

• Can also be used in automatic lathes• Overall length: 21⁄2" • Capacity: .010 to .100"• Includes pin chuck with three interchangeable collets

Pin Chuck Set



SAVE46%

Carbon Steel Hardened Bearing Carbide Morse & Ground Reg. Sale Steel Reg. Sale Tipped Reg. Sale Taper OAL Model # Price Price Model # Price Price Model # Price Price 1 35⁄16" MN251-3061 $3.68 $3.49 MN251-3041 $13.17 $11.79 — 2 43⁄16 MN251-3062 5.37 4.79 MN251-3042 14.93 13.29 — 3 415⁄16 MN251-3063 6.27 5.95 — MN251-3053 $42.35 $38.09 4 65⁄16 — MN251-3044 31.08 27.97 MN251-3054 57.75 53.95 5 81⁄2 — MN251-3045* 56.47 50.79 MN251-3055* 75.73 67.95 6 101⁄2 — MN251-3046 160.47 144.29 — *77⁄8" OAL

Morse Taper Solid Dead CentersCarbon Steel, Bearing Steel or Carbide Tipped

With 60˚ Included Angle• Precision hardened and

ground to closest tolerance

As Low As

$349Import

USA Carbide Tipped

Morse Reg. Sale Taper OAL Model # Price Price 3 51⁄4" MN325-1426 $62.91 $54.95 4 63⁄4 MN325-1427 96.40 85.95

SAVEUP TO

12%

As Low As

$6295

Cap. Reg. Sale Mount Range Model # Price Price 1JT 0-5⁄16" MN414-0206 $107.43 $62.95 2JT 0-3⁄8 MN414-0207 112.30 73.00 33JT 0-1⁄2 MN712-7505 81.45 75.95

Keyless Drill Chucks

For exacting production line and toolroom use.• Easily closed by hand• The greater the load it grips,

the tighter it becomes; does not slip • Hardened and ground; accurately made

Adapt-A-Drive® Drill Chuck

Easily converts any cordless screwdriver to a multi-purpose mini-drill for bit sizes up to 1⁄4".• Integral 1⁄4" hex mount locks the Adapt-A-Drive®

chuck into the screwdriver bit socket• Ideal for starting screw holes

in hard-to-reach spaces• Capacity range:

.028-.250", .7-6.5 mm• KG1 key Mfr’s # 30248


$1995Regular Price: $26.43V-Block & Clamp Set

• Hardened & ground• All sides are precision-ground

square and parallel to each other • Accurate enough to be used in

layouts and surface plate work• One V-block and clamp• 13⁄8" dia. • 21⁄2W x 21⁄2H x 2"L






































http://use-enco.com

http://use-enco.com

Machine Tool Accessories Easy, Secure Shopping


• Five-axis adjustment moves the stop to any position your job requires

• 1⁄4" stop rod can be modifi ed, replaced or extended with a longer piece of bar stock

• Locking lever can be positioned at 360° to avoid interference

• T-nut to fi t 5⁄8" table slots

5-Axis Milling Stop


$9295 Scale Reg. Sale Travel Model # Price Price 8 x 36" MN337-9335 $1,865.23 $1,399.00 8 x 40 MN337-9336 1,968.47 1,479.00 10 x 40 MN337-9337 1,984.20 1,489.00 10 x 48 MN337-9338 2,156.27 1,609.00 12 x 60 MN337-9339 2,369.63 1,769.00 12 x 65 MN337-9340 2,520.07 1,889.00 12 x 84 MN337-9341 2,905.51 2,179.00

2-YEARWARRANTY

Digital Readout Systems (DRO)• 5.7" transmissive LCD• Sealed membrane keypad• Precision glass scales• Preset and zero reset• Absolute/Incremental• Multi-language supports • Help function• Feed rate display• Near zero warning• 4-function calculator (with trig)• 16 tool offsets• Centerline calculation• Fixed reference marks• Job clock• Mounting hardware included

Specifi cationsError compensation: ±9,999 ppm (linear and nonlinear)Construction: die cast metalOperating temperature: 32 to 113° F.Electrical: 100-240 v AC, 50/60 Hz

VUE® Milling Machine DROs• Bolthole pattern calculations with graphics• Inch/Metric• Resolution: .0002" X-Axis; .0002" Y-Axis

Scale Reg. Sale Travel Model # Price Price 2-Axis Models 8 x 20" MN319-9822 $1,288.06 $1,009.00 10 x 24 MN319-9823 1,314.61 1,029.00 13 x 32 MN319-9824 1,391.30 1,075.00 2-Axis Bridgeport 13 x 35 MN319-9827 1,391.30 1,089.00 3-Axis Quill Models 13 x 32 x 4" MN319-9828 1,851.46 1,389.00 13 x 35 x 4 MN319-9829 1,802.30 1,369.00 16 x 36 x 4 MN319-9830 1,802.30 1,369.00 3-Axis Knee Models 13 x 32 x 16 MN319-9831 1,893.74 1,449.00 13 x 35 x 16 MN319-9832 1,893.74 1,449.00 16 x 36 x 16 MN319-9833 1,893.74 1,449.00

Additional Features for ACU-RITE 200-S DROs• Linear error compensation• Sealed 3D, tactile-feel keypad• Position-Trac™ - quickly and accurately

reestablishes workpiece zero after power loss• Vectoring• Edge fi nder input

Scale Reg. Sale Travel Model # Price Price 2-Axis Models 12 x 30" MN337-9342 $1,723.64 $1,329.00 13 x 32 MN337-9343 1,723.64 1,299.00 13 x 35 MN337-9344 1,770.84 1,329.00 16 x 36 MN337-9345 1,770.84 1,329.00 3-Axis Quill Models 13 x 32 x 4 MN337-9346 2,225.10 1,589.00 13 x 35 x 4 MN337-9347 2,272.30 1,649.00 16 x 36 x 4 MN337-9348 2,272.30 1,689.00 3-Axis Knee Models 13 x 32 x 16 MN337-9349 2,324.40 1,739.00 13 x 35 x 16 MN337-9350 2,371.60 1,779.00 16 x 36 x 16 MN337-9351 2,371.60 1,779.00

VUE® Lathe 2-Axis DROs• Lock Axis• Centerline calculation• Instant radius/diameter conversion (inch/mm)• Resolution: .0002" X-Axis, .0005" Y-Axis Scale Reg. Sale Travel Model # Price Price 6 x 36" MN319-9834 $1,523.06 $1,169.00 6 x 38 MN319-9835 1,523.06 1,169.00 12 x 40 MN319-9836 1,681.36 1,249.00 12 x 60 MN319-9837 2,108.09 1,589.00 12 x 78 MN319-9838 2,523.02 1,899.00

Additional Features for 200-S 2-Axis DROs for Lathes• Full system kits include DRO console, scales

and mounting brackets• Lock Axis• Position Trac™

• Instant radius/diameter conversion (inch/mm)• Resolution: .0002" X-Axis, .0005" Y-Axis

As Low As

$1,009

5C Collet Rack

• Holds up to 30 collets• 18 gage steel• Blue-baked-enamel fi nish• Can be hung on wall or can

be set on workbench• 91⁄2 x 12", .048" thick.,

51⁄2" high at one end and 21⁄2" at other end

• Wt.: 3 lbs.



SAVE46%

11 Pc. R8 RoundCollet Set

• 1⁄8 - 3⁄4" x 16ths• Hardened and

ground throughout• 7⁄16"–20 drawbar

thread• Within .0005" T.I.R.

1" from face



SAVE35%





































Machine Tool AccessoriesOnline at use-enco.com


SAVEUP TO

52%

• Wedge-type tool posts are precision engineered to ensure repetitive accuracy

• Interchangeable with Aloris• Oversized T-nut can be

machined to fi t any size lathe6 Pc. Sets include 1 tool post and 5 holders:• Style 1: Boring and facing on piston type,

turning and facing on wedge type• Style 2: Boring, turning and facing • Style 4: Boring, heavy-duty • Style 7: Universal parting blade• Style 10: Knurling, facing and turning

6 Pc. Quick Change Tool Post Sets

Wedge Type

Piston Type

As Low As

$18595

Lathe Piston Type Reg. Sale Wedge Type Reg. Sale Series Swing Model # Price Price Model # Price Price 100 9-12" MN505-2253 $309.50 $187.95 MN890-9636 $383.76 $185.95 200 10-15 MN505-2172 355.62 215.95 MN890-9637 452.39 215.95 300 13-18 MN505-6543 447.90 271.95 MN890-9638 594.51 295.95 400 14-20 — MN890-9639 761.37 425.95

SAVEUP TO

25%Single-Leverage Type• Heavy-duty construction • Front/side gib adjustment • Steel pinions and rams • Four-position anvil• Palmgren includes punch set for specialized pressing

Arbor Presses

Tons of Max. Wt. Reg. Sale Pressure Work Ht. Lbs. Model # Price Price Enco 1⁄2 41⁄2" 25 MN805-1005 $50.74 $38.00 1 51⁄4 40 MN805-1010 61.31 52.00 3 121⁄2 160 MN805-1030* 159.21 151.00 Palmgren 1⁄2 41⁄2 25 MN890-8802 62.78 56.00 1 51⁄2 32 MN890-8803 86.31 77.00 2 8 68 MN890-8804 172.62 155.00 4 153⁄4 225 MN890-8806* 551.19 496.00*Truck Shipment

As Low As

$38

R8 Round Collet Sets• Hardened and ground throughout • 7⁄16"-20 drawbar thread

Reg. Sale Set Sizes Model # Price Price 6 Pc. 1⁄8-3⁄4" x 8ths MN231-4606 $29.36 $23.95 13 Pc. 1⁄8-7⁄8 x 16ths MN505-5022 117.07 69.95

Starting At

$2395

hout

SAVEUP TO

40%

SAVE28%

Boring Head with R8 Shank

• Rugged construction for smooth, chatter-free operation

• Precision boring head with integrated R8 shank

• 21⁄2" head with 3⁄4" offset travel• 1⁄2" diameter vertical

and cross holes• Black-oxide fi nish• .001" direct reading

micrometer dial



• Heavy-duty sharpener won’t burn or damage blade steel• Patented fl exible belt technology conforms to the shape of any blade • 6' cord w/guide & belt • Easily replaceable abrasive grit belts• Uses precision sharpening guides to ensure that you get the proper

angle every timeIncludes: Platform belt, sharpening module, kitchen and outdoor knife guides, and abrasive belt kit (coarse, medium, fi ne).

Knife & Tool Sharpener



• Safe, easy way to remove chips• Removes sharp, stringy chips and cuttings

from lathes, mills and drill presses, without injury to hands and fi ngers

• Constructed with a tough, hardened spring steel blade and a durable plastic handle

The Chipmaster























http://use-enco.com

http://use-enco.com

Machine Tool Accessories It’s IN STOCK and


SAVE10%On Qty.: 4+

Neoprene MountsThick, non-skid, neoprene cushion provides friction and resists oil. No bolting to fl oor required.• Isolates impact and vibration• Zinc-plated hardware • Steel load transfer plate• Cutoff stud fi ts in blind base holes• 1" leveling range • Locks to machine

Load Range Base Bolt Usable Sale Price Each Per Mount Dia. Thick. Dia. Bolt L Model # 1-3 4+ 50-250 lbs. 23⁄8" 3⁄4" 3⁄8"-16 3" MN325-6627 $9.72 $8.75 250-500 3 7⁄8 1⁄2-13 4 MN325-6629 13.25 11.89 500-1000 33⁄8 1 1⁄2-13 4 MN325-6615 15.42 13.79 1000-2000 5 11⁄4 5⁄8-11 5 MN325-6626 28.15 25.00 2000-4000 63⁄4 13⁄8 5⁄8-11 6 MN325-6628 56.93 50.99

As Low As

$875EachQty.: 4+

SAVEUP TO

60%• Supplied with chuck key

Chucks

Thread Mounted

*Smooth sleeve

Medium-Duty Thread Mounted Chucks Capacity Range Mount Mfr’s Sale Mfr’s # Min./Max. Thread Key # Model # List Price 1B 3⁄8 .040/.250" 1/6.5mm 3⁄8"-24 K1 MN290-1404* $110.30 $45.00 2BA 3⁄8 .040/.375 1/10 3⁄8-24 K2 MN290-1400 146.57 59.00 41BA 3⁄8F .040/.375 1/10 3⁄8-24 K30 MN240-2825 61.65 48.00 33BA 1⁄2 .08/.500 2/13 1⁄2-20 K32 MN290-1408 151.08 61.00 33BA 3⁄8 .08/.500 2/13 3⁄8-24 K32 MN290-1406 157.62 63.00 33BA 5⁄8 .08/.500 2/13 5⁄8-16 K32 MN290-1412 157.44 63.00

• For extra heavy-duty drilling applications on production drilling machines, radials, jig borers, mills and lathes • Supplied with a chuck key

• The world’s most accurate key-type chuck for close-tolerance drilling • The ball-thrust bearing reduces friction in the closing mechanism, for greater tightening on the twist drill shank

Ball-Bearing Super Chucks

Capacity Range Tapered Mfr’s Sale Mfr’s # Min./Max. Mount Key # Model # List Price 81⁄2N .040/.250" 2JTS K30 MN505-2191 $199.19 $80.00 16N .125/.625 3/16mm 3JT K4 MN505-8005 356.17 143.00 18N .125/.750 3/19 4JT K4v MN505-8006 535.68 216.00 Super Chuck

Taper Mounted

Starting At

$45

Capacity Range Tapered Mfr’s Sale Mfr’s # Min./Max. Mount Key # Model # List Price Medium-Duty 33 .08/.500" 2/13mm 33JT K32 MN505-2189 $166.58 $67.00 Heavy-Duty 3A .125/.625 3/16 3JT K3 MN290-1320 243.66 97.00 34-02 .040/.500 1/13 2JT K3 MN290-1329 153.02 60.00 34-06 .040/.500 1/13 6JT K3 MN290-1330 203.21 81.00

Plain Bearing Taper-Mounted Drill Chucks

SAVE20%

3" Diameter 5C Mount 3-Jaw Self-Centering Chuck

Precision chuck eliminates having to tear down a setup on a lathe to switch to the chuck when working with a diameter that 5C or MT spindles aren’t readily available for.

Standard Accessories• 1 chuck key• 2 sets of hardened steel jaws;

1 set of internal holding and 1 set of external holding jaws for increased clamping range

• T.I.R. Repeatability: .003"• Wt.: 6.7 lbs.



• 11⁄8" thick fl ange• Machinable face,

ground sleeve and taper• Designed for larger and

odd-shaped pieces• Can be heat treated after

machining or used as is• Internal thread: 1.041-24• External thread: 1.242-20• Made of 1065 steel

Face Pilot Hole Reg. Sale Dia. Dia. Model # Price Price 2" 1⁄4" MN230-4382 $30.59 $23.95 3 5⁄16 MN230-4383 32.87 25.95 4 5⁄16 MN230-4384 47.20 36.95

5C Step ColletsSAVE20%

SoftGrip™ Keyless Drill ChucksFor AC/DC/Pneumatic Rotary Hammer DrillsSoftGrip sleeve for easier, more comfortable tightening.• Increases grip torque up to

300% over standard bite jaws• Anti-lock mechanism prevents

chuck from locking open• 6013-1S with Hammerlock®

provides a positive locking mechanism, which prevents loosening in hammer and other high-vibration applications

MN414-0068

MN414-0069

Reg. Sale Mount Cap. Mfr’s # Model # Price Price 3⁄8-24 1⁄16-3⁄8" 3013-2S MN414-0068 $35.19 $21.95 1⁄2-20 1⁄16-1⁄2 6013-1S MN414-0069 65.15 44.95

Starting At

$2195

Low Description Model # Price Single Position MN337-9316 $14.95 Double Position MN337-9317 19.95

Quickie Vise Handles• Fits all 6" vises with 3⁄4" hex• Machined anodized

aluminum

As Low As

$1495






























Machine Tool AccessoriesREADY TO SHIP!


Can be mounted on any fl at machine surface or tool crib for collet storage.• Holder rotates with fi nger touch for easy

selection of sizes• Collets are seated fi rmly in angular pockets

without loosening when holder is rotated• Molded of long-lasting A.B.S. plastic• Contains 11 R8 collets:

1⁄8 to 3⁄4" by 16ths

SAVE30%

R8 Collet Set with Rotating Holder



SAVE10%On Chucks

3-Jaw Plain Back Lathe Chucks

• Semi-steel body • Self-centering .003" TIR• Requires backplate

(sold separately)6" Chuck Dia. Backplate

As Low As

$8595

Backplates (Some Machining Required)

2-Piece Jaw

1-Piece Jaw

Chuck Thru Wt. Reg. Sale Dia. Hole Lbs. Model # Price Price Chucks with 1-Piece Jaw (2 Sets Included) 4" .860" 8 MN270-4072 $97.34 $85.95 5 1.180 12 MN270-4074 113.57 100.95 6 1.570 20 MN270-4076 135.83 120.95 8 2.550 37 MN270-4078 175.10 155.95 Chucks with 2-Piece Jaw 10 3.150 55 MN270-4030 228.44 202.95 12 3.930 109 MN270-4035* 335.32 297.95 *Truck Shipment

Chuck Reg. Sale Dia. Spindle Model # Price Price 6" D1-4 MN308-0123 $68.45 $60.95 8 D1-4 MN308-0124 88.49 77.95 8 D1-6 MN308-0125 134.47 118.95 10 D1-6 MN308-0126 172.63 152.95 10 D1-8 MN308-0127 183.27 162.95 12 D1-8 MN308-0128 221.91 196.95 15 D1-11 MN328-0988 256.71 227.95

SAVEOVER

15%• Lifting power 14 lbs. (based on 1⁄2" steel)• Trigger-release, hand-operated, 11⁄2" stroke plunger• Handles hard-to-grip metal objects• Easy-to-use, safe and practical time-saving device• High-impact ABS plastic body• Ceramic-type magnet in metal cup housing

(permanent power)

EZ Grip MagnetExtended Length



Specifi cations Dial per rev.: .100" Travel: 8" longitudinal T-slots: 5⁄8" 5" cross Transverse: 5" Ht.: 41⁄2" Base: 8 x 9" oval w/U-slots Table: 51⁄2 x 12" for up to 5⁄8" bolts Wt.: 36 lbs.

Compound Slide Milling & Drilling Table

• Heavy-duty rugged slide for positioning, milling, drilling, microscope viewing and staging

• Adjustable gibs for heavy loads



SAVEOVER

40%

Lathe Packages with Radius Dia. Mode

Reg. Sale Travel Model # Price Price 6 x 36" MN319-9604 $1,516.49 $1,239.00 8 x 40 MN319-9614 1,563.00 1,239.00 8 x 60 MN319-9621 1,928.31 1,519.00 8 x 80 MN319-9631 2,292.65 1,719.00 10 x 60 MN319-9622 1,954.47 1,519.00 10 x 80 MN319-9632 2,340.14 1,739.00 12 x 120 MN319-9638 3,225.25 2,349.00

Machine Table Reg. Sale Travel Size Model # Price Price 12 x 24" 8 x 30" MN319-3319 $1,249.04 $999.00 12 x 30 9 x 42 MN319-3309 1,245.17 1,029.00 12 x 36 9 x 49 MN319-3310 1,245.17 1,029.00 14 x 32 9 x 42 MN319-3320 1,297.49 999.00 16 x 36 10 x 54 MN319-3313 1,349.82 1,029.00 18 x 40 11 x 58 MN319-3312 1,349.82 1,029.00

Digital Readout SystemsFor Lathes & Mills

Packages include:• 20iM digital readout • All mounting hardware• Two high-precision scales • Installation assistance

Mill Packages with Bolthole Cycle

Features:• Easy-to-read display• Resolution: .0002/.0005"• 20-tool offset• Bolthole cycle• Radius/Diameter mode• Taper calculation

5-YEAR MFR'SWARRANTY

Starting At

$979

SAVEUP TO

29%































http://use-enco.com

Machine Tool Accessories


Ask the Enco Tech Team to help

• 60° included angle • For use in a drill chuck or collet • Hardened point is inserted into the center

of the tapping handle or tap center• The stroke of the center will follow the tap as it threads the

hole, assuring straight and accurate hand-tapped threads• One size can be used for all standard tapping applications • 1⁄2" shank • 3⁄8" spring travel distance

Spring Center



Collet Shank Reg. Sale Series Dia. OAL Model # Price Price ER-11 1⁄2" 3.50" MN308-0018 $84.22 $59.95 ER-11 5⁄8 3.50 MN308-0019 95.39 69.95 ER-16 5⁄8 3.65 MN308-0020 110.61 79.95 ER-16 3⁄4 3.65 MN308-0021 104.52 75.95 ER-20 1 3.75 MN308-0024 117.72 85.95 ER-25 1 6.10 MN308-0025 161.36 119.95 ER-25 11⁄4 6.10 MN308-0026 143.09 105.95 ER-32 1 6.20 MN308-0027 174.56 129.95 ER-32 11⁄4 6.20 MN308-0028 155.27 115.95 ER-32 11⁄2 6.20 MN308-0029 149.18 109.95

ER Straight Shank Stubby Collet Chucks

• Ideal for hard-to-machine surfaces

• High-grade alloy steel• Inside backup screw

with left-hand thread and locknut included

As Low As

$5995

4-Way Master Chuck Keys• Master Key will fi t all popular drill chucks • Properly marked eliminating the need for

different types of keys

7BA3⁄8 SM4G61-T2 26BA1⁄2 SM8K64-T1 31BA1⁄2 KM4G61-T1 81⁄2N DC4G61-T1 20BA3⁄8 DC8K61-T1 31-01 SM8K33-T1 22BA3⁄8 SM8K61 31-02 DC4G61-T2 22KG3⁄8 SM4G61-T1 225BA 74K 24BA3⁄8 SM1G61 29A33 31BA3⁄8

Small 4-Way Key For Jacobs Chuck Nos.Large 4-Way Key For Jacobs Chuck Nos. 3A 3B5⁄8 36 33BA1⁄23 3KD 32BA1⁄2 36KD 33BA5⁄8 3PD 35B1⁄2 36PD 11N 34-02 36B5⁄8 2A 14N 34-06 36B3⁄4 33 16N 34-33 2BA3⁄8 3326A 18N 34-33C 33BA3⁄8 33KD 3326E

Reg. Sale Description Model # Price Price Small MN712-0488 $22.28 $14.95 Large MN505-6706 23.29 15.95

As Low As

$1495

• Holds pipe securely• Holds round parts securely• Holds pipe/tube for

butt welding• 11⁄2-21⁄2" min./max.

pipe diameter • 11" overall length

Locking Pipe Clamp



SAVE28%

Drill Chucks

Industrial Keyless Drill Chucks

Keyless for effi cient, fast change of tools.• Medium duty, for portable drilling machines or

stationary machines • Self-tightening mechanism automatically increases the

grip in proportion to the increase in torque during drilling • .039-.512" (1-13mm) capacity

Mount Mfr’s # Model # 3⁄8"-24 JK130 MN319-3117 1⁄2-20 JK130 1⁄2 MN319-3118 33JT JK130 J33 MN319-3119 2JT JK130 J2 MN319-3120 6JT JK130 J6 MN319-3121

Your Choice

$95 Each

All Drill Doctors• Make dull and broken bits work like new!• Works on 118° HSS, carbide-tipped

masonry and TiN-coated bits • Works on drill sizes 3⁄32-1⁄2"• E-Z align system to assure correct

sharpening alignment of even small bits

The DD500X & DD750X also have:• Quick-change diamond sharpening wheel,

which lasts for several hundred sharpenings• Variable alignment to adjust chisel and relief angles • Restores and creates split points • Also works on carbide and cobalt drills • “Push-to-Stop” design prevents

oversplitting the bit point • Storage case• DD750X model can also create custom

points from 115° to 140°, accommodates drills up to 3⁄4"

DD750X

Sharpens Reg. Sale Mfr’s # Drill Point Model # List Price DD350 118° MN893-1327 $96.40 $69.95 DD500X 118 & 135° Split MN368-7038 146.74 139.00 DD750X 118 & 135° Split, 115-140° MN368-7039 204.75 179.00

BONUSDiamond Wheel &

Carry Bag($70 Value)

with Purchase of 500X & 750X!

Next Generation Drill Bit SharpenersSharpens Most Bits in Less Than 60 Seconds

As Low As

$6995

18-19 HD 15-08 MTA_DP.indd 1818-19 HD 15-08 MTA_DP.indd 18 7/15/15 8:09 AM7/15/15 8:09 AM























you select the Right Machine!


Drill Presses

Specifi cations Swing: 20" Capacity: 11⁄4" Mild Steel Spindle Travel: 61⁄2" Spindle to Base: 483⁄8" Max. Table Size: 22 x 19" Column Dia.: 4" Quill Dia.: 3" Horsepower: 11⁄2 Overall Height: 741⁄2" Overall Width: 22" Overall Depth: 36" Weight: 750 lbs.

• 11⁄2 hp, 220v, 1 ph. • 300-2000 rpm, 61⁄2" spindle travel • Heavy base with ground surface• 3 MT with drawbar (can accept

3 MT tang tooling) • 5⁄8" Table T-slots• Quick speed changes, easy

table adjustment • Positive depth control

20" Infi nitely Variable Speed Drill Press

1 year limited warranty!


$2,279Regular Price: $2,533.42

SAVE10%

Floor Model Drill Presses

• All models include drill chuck plus drill chuck arbor on fl oor models• Motor and electrics: 1⁄2 hp, 115/230v, 1 ph. (1 hp, 120v, 1 ph. on 211⁄8" model)• Table T-slots: 1⁄2" (3⁄4" on 211⁄8" model) • Table tilt: 45° (40° on 211⁄8" model)

Specifi cations Swing: 17" 211⁄8" Drilling capacity: 3⁄4" 1" Spindle taper: 2 MT 3 MT Quill travel: 31⁄4" 413⁄16" Chuck capacity: 5⁄8" 5⁄8" No. of speeds/rpm range: 16/240-3380 12/180-4200 Overall height: 64" 70" Table size: 111⁄2 x 111⁄2" 185⁄8 x 161⁄8" Column diameter: 31⁄8" 35⁄8" Base size:" 195⁄8 x 117⁄8" 221⁄2 x 191⁄2" Approx. wt.: 187 lbs. 324 lbs. Model # MN308-0059 MN308-0060 Reg. Price $603.78 $960.81 Sale Price $569.00 $869.95

As Low As

$365

SAVEUP TO

14%

15 & 20" Step Pulley Drill Presses

• Large quill allows greater accuracy • Cast-iron head • Head casting features a permanently lubricated ball-

bearing spindle assembly, using four heavy-duty ball bearings mounted in an enclosed quill for extended life

• Large ground steel column diameter for maximum head and table support

• Table tilts 45°

Specifi cations: 15" Bench Model 15" Floor Model 20" Floor Model Drills to center of circle: 15" 15" 20" Max. cast iron drilling cap.: 5⁄8" 5⁄8" 3⁄4" Max. steel drilling cap.: 1⁄2" 1⁄2" 5⁄8" Quill dia.: 17⁄8" 17⁄8" 21⁄4" Quill travel: 33⁄8" 33⁄8" 43⁄4" Spindle taper: 2 MT 2 MT 3 MT Speeds: 16 (200-3630 rpm) 16 (200-3630 rpm) 12 (150-4200 rpm) Table working surface: 8 x 8" 7 x 71⁄2" 13 x 141⁄2" Column dia.: 27⁄8" 27⁄8" 35⁄8" Base size: 11 x 181⁄2" 11 x 191⁄2" 223⁄4 x 173⁄4" Spindle to base: 24" 48" 431⁄2" Motor: 3⁄4 hp, 115v, 1 ph. 3⁄4 hp, 115v, 1 ph. 1 hp, 115/230v, 1 ph. Floor space required: 26L x 133⁄8W x 39"H 26L x 133⁄8W x 631⁄2"H 34L x 21W x 67"H Weight: 157 lbs. 167 lbs. 304 lbs. Mfr’s # J-2530 J-2500 J-2550 Model # MN328-1040 MN328-1039 MN328-1041 Mfr’s List $649.00 $699.00 $1,199.00 Sale Price $569.00 $599.00 $999.00

15" Bench Model

15" Floor Model

20" Floor Model

2-YEARWARRANTY

SAVEUP TO

16%Starting At

$569

18-19 HD 15-08 MTA_DP.indd 1918-19 HD 15-08 MTA_DP.indd 19 7/15/15 8:09 AM7/15/15 8:09 AM







http://use-enco.com

Machinery Manuals


Lathes

*Lathe is prewired for 110v, but can be wired for 220v

• Headstock with tapered roller bearings• Hardened and ground ways • Reversing switch• Inch dials • Reinforced cross ribs

Wt. Reg. Sale Lbs. Model # Price Price Bench Lathe Only 250 MN893-1273 $1,295.98 $1,165.00 Bench Lathe with Cabinet Stand 328 MN308-0338 1,497.98 1,365.00

Specifi cations Swing Over Bed: 9" Swing Over Cross Slide: 51⁄4" Distance Between Centers: 20" Carriage Travel: 16" longitudinal, 41⁄2" cross 2 Longitudinal Feeds: .005, .007" 27 Inch Threads: 8-56 tpi 11 Metric Threads: .5-3mm Tailstock Spindle Travel: 1.57" (40mm) Compound Travel: 2" Tailstock Taper: 2 MT Spindle Taper: 3 MT Spindle Bore Dia.: .787" (20mm) Motor & Electrics: 3⁄4 hp, 110v*, 1 ph. 6 Spindle Speeds: 130-2000 rpm Machine Dimensions: 38L x 181⁄2W x 16"H Spindle Nose Mounting: 11⁄2-8"

Quick-change gearbox for easier threading9" x 20" Bench Lathes

SAVEUP TO

10%

1-YEAR LIMITEDWARRANTY

Starting At

$1,165• 4" 3-Jaw Chuck • 7" 4-Jaw Chuck • Steady Rest• Follow Rest • Metric Change Gears • 7" Faceplate• 2 MT Dead Center • Threading Dial • Toolbox with Tools • 1⁄2" Capacity, 4-Way Tool Post

Standard Equipment

• Hardened and ground bed with reinforced cross ribs• Headstock with tapered roller bearings• Thread chasing dial • Easy speed changes• Splash lubrication in headstock • Removable gap block• Electromagnetic starter switch • 3-year warranty DROs

Starting At

$3,759Standard Equipment• 6" 3-Jaw Chuck • 7" 4-Jaw Chuck• Steady Rest • Follow Rest • 10" Faceplate • Chip Pan• 3 MT Dead Center • 11⁄16" Capacity • 4-Way Tool Post • Metric Change Gears• Threading Dial • Toolbox with Tools

Specifi cations Swing Over Bed: 13" Table Work Surface Area: 13 x 40" Swing Over Gap: 183⁄4" Length of Gap: 9" Swing Over Cross Slide: 8" Swing Over Compound: 3" Distance Between Centers: 391⁄3" Carriage Travel: 34" Long. Feed Range (Inch./Rev.): .0011-.0311" 40 Inch Threads: 4-112 tpi 29 Metric Threads: .25-4.5mm Cross-Slide Travel: 51⁄8" Cross-Slide Feed Range (Inch./Rev.): .0004-.0105" Compound Travel: 211⁄16" Tailstock Spindle Travel: 33⁄4" Tailstock Taper: 3 MT Spindle Nose Mounting: D1-4 Spindle Bore Dia.: 11⁄2" Spindle Taper: 5 MT Spindle Taper with Sleeve: 3 MT 18 Spindle Speeds: 60-1500 rpm Motor & Electrics: 11⁄2 hp, 220v, 1 ph. Machine Dimensions (w/o stand): 25H x 26W x 67"L Floor Space Required (Max.): 34W x 72"L

13" x 40" Geared Head Gap Bed Bench Lathes

SAVEUP TO

$587

1-YEARLIMITED WARRANTY

Wt. Reg. Sale Lbs. Model # Price Price Lathe ONLY 1100 MN411-0106 $4,176.98 $3,759.00 Lathe with Cabinet Stand 1345 MN411-0133 4,496.98 4,059.00 Lathe with Cabinet Stand with ACU-RITE® VUE 2-Axis DRO Installed 1355 MN411-0135 5,876.98 5,289.00

20-21 HD 15-08 Lathes.indd 2020-21 HD 15-08 Lathes.indd 20 7/15/15 8:10 AM7/15/15 8:10 AM






Online at use-enco.com


Lathes

Specifi cations 13" x 40" 14" x 40" Swing Over Bed: 13" 14" Swing Over Gap: 19" 20" Length of Gap: 93⁄8" 93⁄8" Swing Over Cross Slide: 7" 81⁄2" Swing Over Compound: 31⁄2" 31⁄2" Carriage Travel: 371⁄2" 371⁄4" Long. Feed Range (In./Rev.): .0012-.0294" .0012-.0294" 40 Inch Threads: 4-112 tpi 4-112 tpi 22 Metric Threads: .45-7.5mm .45-7.5mm Cross-Slide Travel: 6" 6" Cross-Slide Feed Range: .0003-.0100" .0003-.0100" Compound Travel: 31⁄2" 31⁄2" Tailstock Spindle Travel: 43⁄4" 43⁄4" Tailstock Taper: 3 MT 3 MT Spindle Nose Mounting: D1-4 D1-4 Spindle Bore Dia.: 17⁄16" 17⁄16" Spindle Taper: 5 MT 5 MT Motor & Electrics: 3 hp, 220v 3 hp, 220v, 3 ph. Machine Dimensions: 713⁄4L x 31W x 455⁄8"H 713⁄4L x 31W x 491⁄8"H

13" x 40" & 14" x 40" Geared Head Gap Bed Engine Lathes8 Speeds, 90 to 1800 rpm

• Jog button for easy gear engagement and spindle inching

• Quick speed changes• Splash lubrication in headstock • Totally enclosed gearbox• Hardened and ground bedways• Spindle with tapered roller bearings• 3-year warranty on DRO

Shown with DRO

Wt. Reg. Sale Description Lbs. Model # Price Price Engine Lathe ONLY 13" x 40" 1940 MN319-9733 $6,198.98 $5,699.00 14" x 40" 1940 MN308-0232 6,598.98 5,939.00 Engine Lathe with ACU-RITE® VUE 2-Axis DRO Installed 13" x 40" 1976 MN319-9734 7,498.98 6,749.00 14" x 40" 1976 MN308-0235 8,098.98 7,289.00


SAVEUP TO

$809

Starting At

$5,699

• 4-Way Tool Post • Backplate• Steady and Follow Rests• Chip Pan • 12" Faceplate • Coolant System • Live and Dead Centers • Foot Brake • Splashguard • 6" 3-Jaw and 8" 4-Jaw Chucks

Standard Equipment

1-YEARLIMITED

WARRANTY

31⁄8" Spindle Bore• Spindle is supported by two tapered

and one ball bearing• Chrome molybdenum headstock gears

are hardened, ground and shaved• Univeral gearbox allows inch, metric,

diametral and module pitch threads, no change gears required

• Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces

• High-quality ANSI Class 50 wear-resistant, cast-iron bed ways are hardened and ground

• Removable gap allows up to 235⁄8" diameter

• Five-position automatic carriage stop increases productivity

• T-slotted compound slide featuring a four-way tool post

Reg. Sale Model # Price Price Lathe ONLY MN328-1312 $10,894.98 $9,995.00 Big Bore Lathe Pkg., PLUS Installed ACU-RITE® VUE 2-Axis DRO System MN328-6126 11,794.98 10,849.00

Standard Equipment• 10" 3-jaw chuck with top reversing jaws• 12" 4-jaw chuck• 12" faceplate• 4-way tool post• Follow rest• Large capacity steady rest• Fully integrated coolant system• Full length splashguard and coolant return• Large easy-to-use foot brake• Articulating halogen work lamp• Centrally located controls with jog button• Threading dial• Mounting pads and levelers• Dead center• Live center• Toolbox and adjusting tools

Specifi cations Swing Over Bed: 14" Swing Through Gap: 235⁄8" Length of Gap: 121⁄4" Swing Over Cross Slide: 75⁄8" Distance Between Centers: 40" Max. Carriage Travel: 35" Range of Longitudinal Feeds (In./Rev.): .0015-0.0913" Max. Cross-Slide Travel: 9" Range of Cross Feed (In./Rev.): .0006-0.0365" Max. Compound Slide Travel: 51⁄8" 61 Inch Threads: 15⁄8-72 tpi 24 Metric Threads: .05-20mm tpi Tailstock Spindle Travel: 5" Tailstock Taper: 4 MT Spindle Mount: D1-8 Spindle Bore: 31⁄8" Spindle Taper (with sleeve): 7 MT (5 MT) 12 Spindle Speeds: 42-1800 rpm Overall Dimensions: 971⁄2L x 40W x 467⁄8"H Motor & Electrics: 71⁄2 hp, 230/460v, 3 ph., Prewired 230v Wt.: 4,987 lbs.

14" x 40" Big Bore Geared-Head Engine Lathes

Starting At

$9,995

20-21 HD 15-08 Lathes.indd 2120-21 HD 15-08 Lathes.indd 21 7/15/15 8:10 AM7/15/15 8:10 AM







http://use-enco.com

http://use-enco.com

Conserve Your Cash! Ask us about


Mill/Drills

Low For Use With Mfr’s # Model # Price ENCO Models 307-3379 and 307-3387 SLRF40 MN404-1550 $69.00 ENCO Models 326-1022 and 326-1021 SLRF45 MN404-1549 69.00 ENCO Models 325-5184, 404-0045 and 405-0593 SLCL45 MN404-1552 69.00

Spindle Locks for Mill/Drills

Your Choice

$69

Simply bolt the Spindle-Lock onto the head of your mill and within minutes, you have an easy-to-use way of “locking” your spindle for tool changes.Just press the big button in front and the plunger locks into the groove of the spline. When your tool change is complete, simply release the button and the plunger springs away from the spline – of course, you still have to remember to remove your drawbar wrench! Speaking of the drawbar wrench, you can slide it into place on top of the Spindle-Lock. Now you’ll always know where your drawbar wrench is.IMPORTANT! The Spindle-Lock only remains actuated by depressing the large button.

SAVEUP TO

$450

• Forward and reversing switch for tapping

• 360° head swivel

163⁄8" Mill/Drills

• Drill Chuck with Key• Drill Chuck Arbor • 52 Pc. Clamping Kit• Shell Mill Arbor • Angle Drill Press Vise• Face Mill

Standard Equipment

Specifi cations Speeds: 150-3000 rpm Swing: 163⁄8" Long. Table Travel: 17" Table Work Surface Area: 81⁄4 x 281⁄2" Cross Table Travel: 71⁄4" Capacity: Drilling Steel: 11⁄4" Drilling Cast Iron: 11⁄2" End Mill/Face Mill: 3⁄4"/3" 4 T-Slots: 5⁄8" Spindle/Quill Travel: 5"* Spindle Taper: R8 Spindle to Table (Max.): 18" Spindle to Column (Max.): 65⁄8" Spindle/Quill Dia.: 3" Motor & Electrics: 11⁄2 hp, 110/220v, 1 ph. Machine Dimensions: 431⁄2H x 38W x 36"D Floor Space (Max.): 62W x 50"D* 4" with power downfeed


Starting At

$1,425 Wt. Reg. Sale Description Lbs. Model # Price Price Mill/Drill Only w/o Power Downfeed 645 MN105-1110 $1,583.38 $1,425.00 w/Power Downfeed 690 MN105-1300 2,322.30 2,090.00 Mill/Drill with Cabinet Stand with Chip Pan w/o Power Downfeed 725 MN105-1108 1,709.98 1,539.00 w/Power Downfeed 775 MN105-1298 2,509.98 2,259.00 Mill/Drill with 2-Axis ACU-RITE® VUE DRO, Enco Power Table Feed, Cabinet Stand w/o Power Downfeed 765 MN240-7152 3,359.98 3,024.00 w/Power Downfeed 785 MN240-7154 4,099.98 3,690.00 Mill/Drill with 3-Axis ACU-RITE® VUE DRO, Enco Power Table Feed

and Cabinet Stand with Chip Pan w/o Power Downfeed 765 MN240-7155 3,759.98 3,384.00 w/Power Downfeed 818 MN240-7157 4,499.98 4,050.00

MN411-0089 shown

20" Square Column Mill/Drills

Starting At

$2,355

Specifi cations Table Size: 91⁄2 x 311⁄2" 6 Spindle Speeds: 120, 210, 345, 670, 1180, 1970 rpm Capacity: Drilling Steel: 19⁄16" Drilling Cast Iron: 13⁄4" End Mill: 11⁄4" Face Mill: 31⁄8" Table Travel (Longitudinal): 22" Cross Table Travel: 8" 4 T-Slots: 1⁄2"W Spindle Quill Travel: 43⁄4" Spindle Taper: R8 Spindle/Quill Dia.: 3" Spindle to Table (Max): 183⁄4" Head Tilt: 90° L, 90° R Motor & Electrics: 2 hp, 220v, 1 ph. Prewired: 220v, 1 ph. Machine Dimensions: 421⁄2W x 28D x 57"H Max. fl oor space req.: 771⁄8W x 311⁄2"D


Wt. Reg. Sale Description Lbs. Model # Price Price Mill/Drill Only 662 MN405-0593 $2,616.98 $2,355.00 Mill/Drill with Stand 810 MN411-0087 2,899.99 2,595.00 Mill/Drill with Stand and Installed Enco Power Table Feed 841 MN411-0088 3,299.99 2,995.00 Mill/Drill with Stand, Installed Enco Power Table Feed and ACU-RITE VUE® 2-Axis DRO 845 MN411-0089 4,499.99 3,995.00

• Head tilts left and right• 6-speed geared head• Dovetail column ways• Quick spindle changes with quick

select gearshift, no belts to change

SAVEUP TO

$504

• Face Mill with Arbor• Drill Chuck Arbor• Drill Chuck & Key

Standard Equipment

NOW WITH

22-23 HD 15-08 MD_M.indd 2222-23 HD 15-08 MD_M.indd 22 7/15/15 8:11 AM7/15/15 8:11 AM

















our Lease Payment Plans today!


Mills

SAVEUP TO

$1,253

• Certifi ed Meehanite casting stress relieved toprovide a rigid machine structure

• Way covers for knee and crossfeed • Precision-hardened and ground table and ways• Dynamically balanced head for quiet, trouble-free operation• One-shot lubrication and solid quill feed • Head tilts 90° R/L, 45° forward/back• U.S. patented ram locking system • Turret swivels 360° • Hand-scraped turret column ways• Dovetail ways (9" x 49"); Square ways (10" x 54")• Upper and lower surface of saddle

laminated with Turcite-B for smooth, accurate and wear-resistant surfaces

• 3-year warranty on DRO

Wt. Reg. Sale Description Lbs. Model # Price Price Mill Only 9 x 49" 2227 MN307-3678 $8,356.98 $7,521.00 10 x 54" 3400 MN890-9988 9,986.98 8,988.00 Mill with Power Table Feed and Newall 2-Axis DRO 9 x 49" 2246 MN414-2113 10,338.98 9,305.00 10 x 54" 3440 MN414-2116 11,968.98 10,772.00 Mill with Power Table Feed and Newall 3-Axis (Quill) DRO 9 x 49" 2251 MN414-2114 10,806.98 9,726.00 10 x 54" 3445 MN414-2117 12,436.98 11,193.00 Mill with Power Table Feed and Newall 3-Axis (Knee) DRO 9 x 49" 2251 MN414-2115 10,906.98 9,816.00 10 x 54" 3445 MN414-2118 12,536.98 11,283.00


Specifi cations 9" x 49" 10" x 54" Variable Speed: 70-4200 rpm 70-4200 rpm Longitudinal Travel: 35" w/o Power Feed 39" w/o Power Feed 3 T-Slots: 5⁄8" x 11⁄4 5⁄8" x 11⁄4 Saddle Cross Travel: 12" 16.5" Knee Travel: 161⁄2" 173⁄4" Spindle/Quill Travel: 5" 5" Spindle Taper: R8 R8 Spindle Diameter: 3.375" 3.375" 3 Spindle Feeds (Inch/Rev.): .0015, .003, .006" .0015, .003, .006" Spindle to Table: 0-18 5⁄16" 0-20" Spindle to Column: 5-20" 7-26" Head Swivel, w/Locks RH/LH: 90°/90° 90°/90° Head Tilt-Forward & Back: 45°/45° 45°/45° Ram Turret Swivel: 360° 360° Ram Travel: 12" 18" Motor & Electrics: 3 hp, 220/440v, 3 ph. 3 hp, 220/440v, 3 ph. Machine Dimensions: 85H x 59W x 55"L 88H x 72W x 66"L Machine Base Dimensions: 371⁄2 x 24" 43 x 24" Floor Space Required (Max.): 140W x 70"D 150W x 94"D

Starting At

$7,521

9" x 49" & 10" x 54" Variable Speed Vertical MillsWith Newall DP700 Series DROs

SAVEUP TO

$1,225

• Head tilts 90° right/left, 45° forward/back • Precision Y-axis, leadscrew-bearing hub with a maximum .005" deviation to Y-axis centerline, giving fl uid in/out motion to the saddle

• Precision squareness of table surface to the guideway; .00078"/12" travel • Turret swivels 360° • Parallelism of table surface to longitudinal movement;

.00078"/12" travel • R8 spindle taper • 3 T-slots: 5⁄8" • 3.375" spindle dia.• 3 spindle feeds: .0015, .003, .006" • 0-18" spindle to table• Backlash adjustment • One-shot lubrication to table and saddle;

gravity feed lubricator for spindle • Drawbar and tool kit

1-YEARLIMITED

WARRANTY

Specifi cations 9" x 42"/9" x 49" 10" x 54" Speeds: 80-4800 rpm (9"x42"), 78-4200 rpm 60-4200 rpm (9"x49") Longitudinal Travel: 30" (9"x42"), 35" (9"x49") 38.5" Saddle Cross Travel: 13.5" 17" Knee Travel: 16" 17.5" Spindle/Quill Travel: 5" 5.1" Spindle to Column: 5.5-20" 4.5-20" Ram Travel: 14.5" 19" Motor & Electrics: 2 hp, 220v, 3 ph. 3 hp, 220/400v, 3 ph. Machine Dimensions: 85 x 71 x 74" 841⁄2 x 72 x 75"

9" x 42", 9" x 49" & 10" x 54" Variable Speed Vertical Mills

Wt. Reg. Sale Size Lbs. Model # Price Price Mill Only 9 x 42" Step Pulley 2400 MN100-1527 $6,959.98 $6,264.00 9 x 49" Variable Speed 2650 MN100-1599 7,558.98 6,800.00 10 x 54" Variable Speed 2840 MN100-1588 9,173.98 8,256.00 All Packages Include Installed Enco 150 In./Lb. Torque Power Table Feed Vertical Mill Packages 9 x 42" Step Pulley 2415 MN505-6781 7,259.98 6,500.00 9 x 49" Variable Speed 2665 MN505-6790 7,958.98 7,160.00 10 x 54" Variable Speed 2855 MN505-6796 9,473.98 8,525.00 Mill with Enco 150 in./Lbs. Torque Power Table Feed and ACU-RITE® VUE 2-Axis DRO System Installed 9 x 42" Step Pulley 2435 MN890-9181 8,459.98 7,614.00 9 x 49" Variable Speed 2690 MN890-9190 9,158.98 8,244.00 10 x 54" Variable Speed 2836 MN890-9196 10,873.98 9,786.00 Mill with Enco 150 in./Lbs. Torque Power Table Feed and ACU-RITE® VUE 3-Axis (Quill) DRO System Installed 9 x 42" Step Pulley 2440 MN890-9182 8,859.98 7,974.00 9 x 49" Variable Speed 2695 MN890-9191 9,458.98 8,513.00 10 x 54" Variable Speed 2891 MN890-9197 11,173.98 9,999.00 Mill with Enco 150 in./Lbs. Torque Power Table Feed and ACU-RITE® VUE 3-Axis (Knee) DRO System 9 x 42" Step Pulley 2440 MN890-9183 8,909.98 8,019.00 9 x 49" Variable Speed 2695 MN890-9192 9,608.98 8,648.00 10 x 54" Variable Speed 2891 MN890-9198 11,223.98 9,999.00

Starting At

$6,264MN890-9198 shown

22-23 HD 15-08 MD_M.indd 2322-23 HD 15-08 MD_M.indd 23 7/15/15 8:12 AM7/15/15 8:12 AM

























http://use-enco.com

We stock over 20,000 Replacement


Bandsaws

SAVEOVER

$100

Hard Edge Flex Back Blade – 7'9"L x 3⁄4"W

Specifi cations Motor & Electrics: 1 hp, 110v, 60 Hz, 1725 rpm 4 Blade Speeds: 90, 135, 195, 255 sfpm Blade Size: 93 x 3⁄4 x .032" Cutting Cap.: 7 x 12" Approx. Wt.: 314 lbs.

Replacement Blades

7" x 12" Horizontal/Vertical BandsawHydraulic Feed & Coolant Pump

• Portable on four 5" casters• Heavy cast-iron base with

quick-lock vise, vertical table saw

• Hardened and ground worm gears

• Auto shut-offIncludes:10 x 10" vertical table and 45° swivel vise.




Reg. Sale tpi Model # Price Price Carbon—.032" Thick 8 MN371-3164 $12.94 $9.99 14 MN371-3165 12.94 9.99

SAVE$240

Specifi cations Motor & Electrics: 1 hp, 220v, 60 Hz, 1 ph., 1720 rpm 3 Blade Speeds : 127, 216, 268 sfpm Cutting Capacity 90°: 7 x 101⁄2", 7" round Cutting Capacity 45°: 4 x 41⁄2", 4" round Blade Size: 93 x 3⁄4 x .032" Machine Dimensions: 50L x 221⁄2"D Approx Wt.: 400 lbs.

7" x 101⁄2" Horizontal/Vertical BandsawGeared Swivel Head for Quick Speed Changes


$1,52995Regular Price: $1,769.98

• Heavy cast-iron base with quick-lock vise

• Hydraulic feed and coolant system • Hardened and ground worm gear,

vertical table saw


• Heavy cast-iron base with quick swivel lock vise and vertical saw table

• Adjustable hydraulic downfeed and coolant system• Safety automatic shutoff and adjustable material stop• Worm gears are hardened and ground• Roller cabinet has built-in chip pan• Motor & electrics: 1 hp, 220v, 1 ph., 1720 rpm• Model # MN137-3190 includes blade guards,

chip brush, adjustable roller blade guides• Model # MN137-3195 has a geared

head for quick speed changes

7" x 12" Horizontal/Vertical Bandsaws

Specifi cations MN137-3190 MN137-3195 Blade Speeds: (4) 85, 130, 180, 285 sfpm (3) 127, 216, 268 sfpm Blade Size: 93 x 3⁄4 x .032" 93 x 3⁄4 x .032" Cutting Cap. 90˚: 7 x 12", 7" Round 7 x 12", 7" Round Cutting Cap. 45˚: 41⁄2 x 7" Approx. Wt.: 350 lbs. 350 lbs.

Reg. Sale Description Model # Price Price Horiz./Vert. Bandsaw MN137-3190 $1,099.98 $989.95 Geared Head Horiz./Vert. Bandsaw MN137-3195* 1,299.98 1,039.95 *230v

SAVEUP TO

20%

Starting At

$98995


MN137-3190

Specifi cations: Motor & Electrics: 1.5 hp, 110v, 1 ph. Blade Speed (No.) Range sfpm: MN337-9149: (4) 114, 196, 288, 377 Capacity: Round: 9" Rectangle @ 90°: 5" x 16" Rectangle @ 45°: 8" x 91⁄2" Blade Size: 1149⁄16" x 1" x 0.035" Machine Dimensions: 62"L x 22"D x 481⁄2"H

9" x 16" Horizontal BandsawsStep Pulley & Variable Speed Models

Features:• High effi ciency gear drive system

(RF-916S: Step Pulley, RF-916SV: Variable Speed)

• Fully adjustable hydraulic downfeed• 0 to 45° cutting angle• Carbide bearing blade guide enhances

cutting stability and extends blade life• Coolant system for wet cutting• Stand with integral chip/water panIncludes: Bi-metal blade, chip brush and length stop set.

Wt. Reg. Sale Description Mfr’s # Lbs. Model # Price Price Step Pulley RF-916S 640 MN337-9149 $2,968.22 $2,395.00 Variable Speed RF-916SV 640 MN337-9150 3,310.70 2,650.00

SAVEUP TO

20%

FREEPLUS

24-25 HD 15-08 Bandsaws.indd 2424-25 HD 15-08 Bandsaws.indd 24 7/15/15 8:13 AM7/15/15 8:13 AM















Parts for the Machines We Sell!


Bandsaws

5" x 6" Horizontal/Vertical Bandsaw3 Speeds

• Vise swivels 45° left • 1⁄3 hp, 110/220v motor • Speed changes 80, 120,

200 sfpm • Automatic cut-off safety switch• Mitering vise & blade guard• Wt.: 125 lbs.

Specifi cations Max. Workpiece Width: 6" Throat Depth: 41⁄8" Horizontal Cap. Round: 5" Blade Size: 641⁄2 x 1⁄2 x .025" Wheel Dia.: 73⁄8" Vertical Saw Height: 56" Horizontal Saw Height: 38" Machine Dim.: 38L x 12"D




SAVE10%

SAVEUP TO

50%on 5+

Bi-Metal Bandsaw BladesWelded to Length

• Cobalt high-speed steel cutting edge • Designed for long life in a wide

variety of utility and contour cutting operations

• Thickness: .035" • Variable tooth

EachQty.: 5+

As Low As

$2395

Blade Mfr’s Sale Price Each L W tpi Model # List 1-4 5+ 7' 9" 3⁄4" 6-10 MN371-0410 $46.26 $32.95 $23.95 7' 9 3⁄4 10-14 MN371-0412 46.26 32.95 23.95 10' 3⁄4 6-10 MN240-4965 55.07 30.95 25.95 10' 3⁄4 10-14 MN240-4966 55.07 30.95 25.95 10' 1 10-14 MN240-4967 63.01 30.95 25.95 11' 6" 1 5-8 MN240-4831 70.80 42.95 35.95 11' 6" 1 10-14 MN371-0446 70.80 44.95 37.95

9" x 16" Horizontal BandsawWith Built-In Coolant System

Replacement Blades • 128L x 1W x .035" thick Bi-Metal Blades Model # MN326-0018 - 10 tpi Model # MN326-0017 - 10-14 tpi Low Price $45.99 Ea. Flexible Back Blade Model # MN326-0016 - 10 tpi Low Price $19.99

Specifi cations Max. Workpiece Width (90°): 161⁄2" Throat Depth: 91⁄2" Vise Jaw Height: 51⁄4" Max. Workpiece Width (45°): 83⁄4" Drive: 4 Step Pulley & Worm Gear 4 Blade Speeds: 50, 125, 200, 275 sfpm Blade Size: 1281⁄2 x 1 x .035" Wheel Dia.: 14" Motor: 1 hp Floor Space Req.: 30 x 65"

• Iron saw frame • Blade guide • Blade included • Double row of adjustable bearings support saw blade• Frame maintains blade and wheel alignment• Rollers back-up head control cylinder with needle valve • Quick-positioning vise, with fully adjustable jaws for 0°-45° angles • On/off controls with automatic shutoff,

large hand wheel with tension spring for easy blade tensioning

• Wt.: 760 lbs. • 220v • 1 phase

SAVEOVER

$119




14" Wood/Metal Vertical Bandsaws

*Prewired 230V

• Cast-iron frame • Solid, one-piece steel base for extra stability• Conveniently located on/off switch• Exclusive gear-box design for wider variety of metal,

wood, nonferrous metal and plastic cutting applications• 1 hp, 1725 rpm motor Specifi cations: Capacities under guide: 6", with riser block 12" From blade to frame: 131⁄2" Blade size: 3⁄8 x .025 x 921⁄2" Cutting speeds (wood): 3300 sfpm Cutting speeds (metal): 39, 57, 78, 107, 142, 196, 278 sfpm; variable speed 90-340 sfpm Table tilt: 45° right, 15° left Height from fl oor: 68" Miter gage groove: 3⁄4W x 3⁄8"D Floor space required: 20L x 16W x 68"H

Wt. Mfr’s Sale Description Lbs. Mfr’s # Model # List Price 1 ph., 115V 280 414500K MN328-1046 $1,519.05 $1,399.00 3 ph., 230/460V 280 414504K MN328-1049* 1,519.05 1,399.00

2-YEAR MFR�SWARRANTY

Your Choice

$1,399

24-25 HD 15-08 Bandsaws.indd 2524-25 HD 15-08 Bandsaws.indd 25 7/15/15 8:13 AM7/15/15 8:13 AM















http://use-enco.com

Ask the Enco Tech Team to help


Sanding & Finishing

SAVEUP TO

41%

Stand(optional)

• 3450 rpm • 115v/60 HzIncludes: • A bright, fl exible work

light (bulb sold separately) • Two grinding wheels: Coarse

36 grit and medium 60 grit

• Protective spark guard on each wheel with adjustable eye shield

• Durable cast-iron base withmounting holes and rubberfeet for easy mounting

Bench Grinder Stand• 27" height • Sturdy base with pre-drilled holes for

mounting on fl oors• Base mounting area for bench grinders: 101⁄2 x 71⁄2"

Bench Grinders

8" Bench Grinder

Starting At

$9995

Spindle Wt. Reg. Sale Description Size hp Amps Lbs. Model # Price Price 6" Grinder 1⁄2" 1⁄2 3.5 23 MN890-0832 $169.95 $99.95 8" Grinder 5⁄8 3⁄4 5.0 31 MN890-0833* 189.95 115.95 Stand 20 MN890-0834 98.95 69.95* 6' power cord

Belt Sanders1" x 42" Sander—1⁄3 hp, 1-phase Motor• 1800 sfpm • Contact wheel • Tilt table • 1725 rpm2" x 48" Sander—1⁄2 hp, 1-phase, 115v Motor• Contact wheel • Tilt table • Removable platen • Fully hinged guard • Vertical or horizontal• 4500 sfpm • 3450 rpm4" x 36" Sander—1⁄2 hp, TEFC 1-phase, 115v Motor• Direct drive • 3450 rpm • Full OSHA safety guard• Easy opening side door

for belt change

1 x 42" Sander

Belt Wt. Reg. Sale Size Lbs. Model # Price Price 1 x 42" 29 MN505-1371 $286.11 $259.00 2 x 48 48 MN505-1370 452.43 409.00 4 x 36 50 MN240-3857 674.19 609.00

As Low As

$259

Dry Dust Collector• Effectively handles the collection of wood chips and sawdust• Single-stage design allows you economical, quiet operation• 4 casters allow total mobility• Powerful, single-phase motors are permanently lubricated,

totally enclosed, fan cooled and continuous-duty rated• High air velocity design creates a more powerful toolIncludes:• 50 micron fi lter bag • 30 micron collector bag • Single-hose connection • Wheel casters • Steel straps to secure bags • Connecting hose not included

Mfr’s Sale Description Model # List Price 30 Micron Collector Bag MN411-2046 $65.00 $57.95 50 Micron Filter Bag MN411-2047 63.00 54.95

Specifi cations Blower wheel dia.: 91⁄2" Sound rating @ 3": 60-70 dB Dia. of hose connection: 4" Bag dia.: 14" Filter/collector bag length: 235⁄8"/235⁄8" Collector bag capacity: 2.1 cu. ft. Air fl ow @ 4": 650 cu. ft./min. Static pressure (inch of water): 8.5 Overall dimensions: 27L x 14W x 57"H Motor: 1 hp, 1 ph., 115/230v, prewired 115v Weight: 88 lbs.

Mfr’s # DC-650


$389Mfr’s List: $442.00

SAVE15%

Wet-Dry Grinder

8"/5"• 8" wet grinder wheel for fi ne fi nishing• 5" dry wheel for removing deep nicks

and scratches without damaging• Blade holder for easy sharpening • 1⁄4 hp • Water tank for cooling• 3450 maximum rpm• 1" wheel width • 1" spindle• Wt.: 30 lbs.



WHILESUPPLIES

LAST

6" Carbide/HSS Grinder

Specifi cations:• Two 113⁄4 x 41⁄8" tool tables tilt 45° up or down • 1⁄2 hp motor, single phase, 120v• 3450 rpm



26-27 HD 15-08 S&F.indd 2626-27 HD 15-08 S&F.indd 26 7/15/15 8:14 AM7/15/15 8:14 AM












you select the Right Machine!


Sanding & Finishing

SAVE22%On Dust Collector

Portable Dust Collector

Specifi cations Motor & Electrics: 1 hp, 110v, 1 ph. Blower Capacity: 750 cfm Bag Connections: 1 Connector Diameter: 4"

• Portable - easily moved from job to job• 4" intake handles large chips and sawdust

easily and effectively• Heavy-duty carrying frame• Ball bearing casters

for easy rolling• Wt.: 45 lbs.



Low Description Wt. Model # Price Replacement Dust Bag 1 lb. MN150-3027 $12.82

Accessory

SAVE17%

Combination 1" x 42" Belt& 8" Disc Sander

• Belt table tilt: 45° out • Disc table size: 4 x 10"• Disc table tilt: 45° out • Dust collection outlet: 11⁄2" dia.• Overall dimensions: 22 x 21 x 14"• Belt table size: 61⁄8 x 71⁄8"• 3000 sfm belt speed• 1725 rpm disc speed• 1⁄3 hp, 115v, 1 ph.,

60 Hz motor• Approx. wt.: 62 lbs.Mfr’s # J-4002


$419Mfr’s List: $509.00

Use for Metals, Wood, Fiberglass & Plastic• Counterbalanced gear and rack mechanism for raising

and lowering table for positive control tilting the table• Wrap-over guard • Features Baldor motors

20" Disc Grinders

Specifi cations: Table Height: 36" Overall Height: 54" Table Size: 271⁄2" x 141⁄2" Table Tilt: 35° Up, 45° Down Table Slot: 3⁄8 x 3⁄4" Voltage: 220v

Wt. Low Description hp rpm Lbs. Model # Price 1 Phase 11⁄2 1725 310 MN240-7169 $2,179.00 3 Phase 2 1740 310 MN240-7170 2,179.00

Two machines in one, use in vertical or horizontal position.• Tilt table• Contact wheel • Removable platen• 1⁄2 hp, single phase, 110v• 3450 rpm • 2 x 48" Belt size• Grinder spindle size: 5⁄8"• Max. grinding wheel size: 7 x 1 x 5⁄8"• Wt.: 55 lbs.Mfr’s # 2SK7


$685

Combination 7" Grinder / 2" x 48" Sander

10" Bench Grinder/Buffer

• For grinding, buffi ng and polishing all types of materials

• Large cast aluminum tilting tool rest for angle grinding

• 1725 rpm • 1 hp, 120/240v• 10" wheel diameter • 1" wheel bore• 36 and 60 wheel grit• Includes dust collection

port and hosesMfr’s # 82101 Sale Price

Model # MN327-5891

$34995Reg. Price: $419.95

SAVE$70

6" x 48" Belt & 9" Disc SanderWith Stand

• Quick belt adjustment • Belt locks at any angle

from horizontal to vertical• Tilting table with miter gage• 3⁄4 hp, 115v, 1-phase motor• 1350 sfpm • 45° table tilt• Approx. wt.: 130 lbs.



SAVEOVER

15%

SAVE20%

6" x 48" Belt & 10" Disc Sander

• Belt operates in horizontal or vertical position• Two cast-iron tilt tables• Miter gage standard• 1 hp, 115v, 1-phase motor• 1650 sfpm belt speed/

1750 rpm disc speed • Wt.: 170 lbs.


$999Regular Price: $1,199.00

26-27 HD 15-08 S&F.indd 2726-27 HD 15-08 S&F.indd 27 7/15/15 8:14 AM7/15/15 8:14 AM










http://use-enco.com

Machinery Manuals


Metal Fabricating

Pipe Bender12 Tons of Hydraulic Power

• Easy, lower cost way to bend pipe, conduit, tubing, I-beam and channel steel

• Bends up to 2" schedule 40 pipe or 4" I-beam• 110v AC, plugs into standard 20 amp outlet• 2500 psi • Wt.: 250 lbs.


$1,79999Regular Price: $2,241.90

SAVE$324On 6 Pc. Set

Accessories

Individual Pipe Dies

Bend Reg. Sale Size Radius Model # Price Price 1⁄2" 2.94" MN890-0435 $163.80 $125.00 3⁄4 3.68 MN890-0436 187.20 139.00 11⁄4 5.81 MN890-0438 271.80 199.00 11⁄2 6.65 MN890-0439 332.10 249.00 2 8.31 MN890-0440 403.20 349.00

6 Pc. 90° Pipe Die Set• Precision machined, cold drawn,

1018 steel for long life• Sizes 1⁄2-2" Model # MN890-0441Reg. Price: $1,289.70Sale Price: $965.00

SAVEOVER

15%

1-YEAR MANUFACTURER�S

WARRANTY

SAVEOVER

10%On Notcher

4 Ton Hand Notcher

Notch Any Shearable Material• Heavy-duty blades

Specifi cations Mild Steel Cap.: 16 Gauge Max. Notch: 6" x 6" x 90° Stroke: 3⁄4" Stainless Cap.: 20 Gauge Table Size: 171⁄2 x 12"

Stand sold separately

StandModel # MN130-5115Low Price: $199.99



SAVE23%

50" x 16 Gauge Power Roll

Specifi cations Motor: 220v*, 3 ph., 3⁄4 hp Roll Speed: 22 rpm Capacity: 16 gauge Min. Radius: 1.5" Roll Dia.: 3" Weight: 880 lbs.* Can be rewired to 440v

1-YEARLIMITED

WARRANTYSale Price

Model # MN130-5510


SAVEUP TO

25%

Work Wt. Press Reg. Sale Ton Range Lbs. Style Model # Price Price 6 0-8" 68.2 H MN307-0121 $167.12 $159.00 30 0-34 286 HYC MN307-0126 929.06 695.00

Style HYC

• Use for aligning jobs, such as straightening crankshaft and connecting rod

• Great for press fi t, such as pressing in and out of shaft pin, gear and bushing

• Use for die press and punch press processing

HydraulicShop Presses

Style H

Starting At

$159

Starting At

$709Sheet Metal Pan & Box Brakes

Wt. Reg. Sale Model Gauge Lbs. Model # Price Price Bench 16 309 MN130-5061 $716.54 $709.00 Floor 12 1525 MN130-5234 1,998.98 1,899.00 Stand 64 MN130-5075 219.98 179.95

• Steel fi ngers can be removed or repositioned for custom metal work

• Model #MN130-5061 includes counterbalance

MN130-5061

Specifi cations MN130-5061 MN130-5234 Mild Steel Cap.: 16 Gauge 12 Gauge Stainless Cap.: 20 Gauge 16 Gauge Max. Beam Lift: 11⁄4" 11⁄2" Max. Bend L: 481⁄4" 481⁄4" Min. Reverse Bend: 5⁄16" 1⁄2" Finger Width: 2, 3, 4" 3, 4, 5" No. of Fingers: 16 10 Max. Box Depth: 3" 4" Beam Adjustment: 0-1⁄2" 0-1⁄2"

28-29 HD 15-08 MetFab.indd 2828-29 HD 15-08 MetFab.indd 28 7/15/15 8:15 AM7/15/15 8:15 AM






















Metal Fabricating

40 Ton Ironworkers Fabrication Machine

SAVE$560

Features:• Punches, shears, notches, bends and forms• 110v AC, 1 ph.• All guarding complies with ANSI B11-5 standards• Meets American National Safety standards

for ironworkersStandard Equipment:• 2" die holder • Punch retaining nut and stripper• Power cavity includes 3-in-1 shearMfr’s # MP4000

Accessories Reg. Sale Description Dimensions Mfr’s # Model # Price Price Brake for MP4000 8" MP4110 MN890-0444 $806.40 $645.00 5 Pc. Round Punch Starter Set 1⁄4, 3⁄8, 1⁄2, 5⁄8, 3⁄4" MP4140 MN890-0447 225.90 179.00

Specifi cations Rated on 65,000 psi Tensile Speed: spm Approx. 4-6 Motor: 3⁄4 hp, 110v, 1 ph. Throat Depth: 33⁄4" Punch Capacity: 40 Tons Pipe Notchers: 1⁄2, 3⁄4, 1, 11⁄2, 2" Shear: Flat Bar: 3⁄8" x 4" and 1⁄4" x 6" Angle: 1⁄4" x 3" x 3" Rod: 3⁄4" Square: 5⁄8" Hydraulics: 2500 psi Oil Capacity: 1 Gallon Dimensions: 24W x 551⁄4H x 30"L Weight: 410 lbs.




SAVEUP TO

15% Dia. of Min. Wt. Reg. Sale Description Rolls Radius Lbs. Model # Price Price 24" x 20 Gauge 2" 1" 195 MN130-4501 $439.09 $395.00 50" x 16 Gauge 3 11⁄2 528 MN130-5501 997.43 895.00

• Maximum gauge capacity is applicable when using mild steel

• Using galvanized steel lowers maximum gauge capacity

Shown with Stand, sold separately.

Slip Rolls

Starting At

$395

1-YEAR LIMITED WARRANTY

Reg. Sale Description Model # Price Price Stand (56" x 17" x 24") MN130-5075 $219.98 $185.00

Stand for 50" x 16 Gauge Slip Roll


Starting At

$3,14995

SAVEUP TO

$743

52" Hydraulic & Pneumatic Shears

16 Gauge Capacity (mild steel)• Guarded foot switch • 3 hp, 220v• Cap. back gauge—27" • Cap. front gauge—26"

Wt. Reg. Sale Description spm Lbs. Model # Price Price Pneumatic 25 1155 MN130-5355 $3,707.98 $3,149.95 Hydraulic 60 1350 MN130-5345 4,943.98 4,200.00

• Shear frame, bed and cutter head assemblies are constructed of heavy-duty cast iron• Shear bed is machined and surface-ground to precision tolerances• Adjustable tri-action, high carbon high-chromium steel blades• Upper and lower blades have a 2° edge relief • Bed-adjusting lower blade• Upper blade is adjustable via truss bar on cutter head• Spring-activated, adjustable hold-down feet• Double-locking back gauge with embossed scales and vernier wheels• 16 gauge mild steel shear capacity• 20 gauge stainless steel shear capacity• 37 gauge shear front• 30 gauge shear range back

Foot Squaring Shears

3-YEAR MFR'SWARRANTY

Overall Dimensions Wt. Reg. SaleDescription L x H x D Lbs. Mfr’s # Model # Price Price37" Shear 461⁄4 x 42 x 26" 700 36 MN328-1966 $2,049.80 $1,999.9952" Shear 61 x 42 x 26 950 52 MN328-0231 2,749.73 2,699.99

Blade Handle Wt. Reg. Sale L L Lbs. Model # Price Price 6" 28" 40 MN130-5710 $85.76 $69.95 12 39.5 100 MN130-5700 133.66 119.95

Specifi cations Cap. Blade L: Round: Flat Bar: Plates: 6" 3⁄8" 23⁄4 x 1⁄4" 3⁄32" 12 7⁄16 23⁄4 x 1⁄4 1⁄8

• Compound leverage for easy operation• Long handle provides plenty of shearing torque• Tool steel blades for long life• Mounts directly to

your workbench

Bench Top ShearsCuts Sheet Steel, Bars & Rods

o

SAVEUP TO

18%

28-29 HD 15-08 MetFab.indd 2928-29 HD 15-08 MetFab.indd 29 7/15/15 8:16 AM7/15/15 8:16 AM













http://use-enco.com

http://use-enco.com

Over 90,000 PRODUCTS Available


End Mills

SAVE30%

On 12+

Carbide-Tipped Tool Bits

Ind. AL AR Sale Price Ea. Size No. Model # Model # 1-11 12+ C2 1⁄4" 4 MN383-7140 MN383-7100 $5.47 $3.77 5⁄16 5 MN383-7144 MN383-7104 5.99 4.13 3⁄8 6 MN383-7148 MN383-7108 5.99 4.13 1⁄2 8 MN383-7156 MN383-7116 6.73 4.64 5⁄8 10 MN383-7160 MN383-7120 11.04 7.62 3⁄4 12 MN383-7164 MN383-7124 13.76 9.49 C5 1⁄4 4 MN383-7142 MN383-7102 5.47 3.77 5⁄16 5 MN383-7146 MN383-7106 5.99 4.13 3⁄8 6 MN383-7150 MN383-7110 5.99 4.13 1⁄2 8 MN383-7158 MN383-7118 6.73 4.64 5⁄8 10 MN383-7162 MN383-7122 11.04 7.62 3⁄4 12 MN383-7166 MN383-7126 13.76 9.49

• C2 grade for cast iron and nonferrous materials

• C5 grade for steel and steel alloys Style AL• Cuts from left to right • Left hand for turning to a square shoulder Style AR• Cuts from right to left • Right hand for turning to a square shoulder

As Low As

$377Each Qty.: 12+

• 1⁄2" straight shank

HSS Woodruff Keyseat CuttersStraight Tooth

Nom. Face Old American Mfr’s Sale Dia. W OAL Std. Std. Model # List Price 1⁄4" 1⁄16" 21⁄16" 201 202 MN619-2604 $26.02 $19.95 3⁄8 3⁄32 23⁄32 212 303 MN367-2540 26.02 19.95 3⁄8 1⁄8 21⁄8 213 403 MN367-2550 26.02 19.95 1⁄2 1⁄16 21⁄16 1 204 MN367-2610 26.02 19.95 1⁄2 1⁄8 21⁄8 3 404 MN367-2640 26.02 19.95 5⁄8 3⁄32 23⁄32 4 305 MN367-2630 26.27 19.95 5⁄8 1⁄8 21⁄8 5 405 MN367-2650 26.27 19.95 5⁄8 3⁄16 23⁄16 61 605 MN367-2680 26.27 19.95 3⁄4 1⁄8 21⁄8 7 406 MN367-2660 27.53 20.95 3⁄4 1⁄4 21⁄4 91 806 MN367-2700 27.53 20.95 3⁄4 3⁄16 23⁄16 9 606 MN367-2720 27.53 20.95 1 3⁄16 23⁄16 13 608 MN367-2750 32.88 24.95 1 1⁄4 21⁄4 15 808 MN367-2800 33.19 24.95

SAVE23%

SAVEUP TO

53%

Made from premium HSSE-V3 (3% Vanadium HSS) for increased toughness and tool life. With no cobalt content, these end mills are environmentally safe when reground.

2 Flute

HYPRO V® HSS End Mills2 & 4 Flute Centercutting

4 Flute

Mill Shank Flute Mfr’s Sale Dia. Dia. L OAL Model # List Price 2 Flute 1⁄8" 3⁄8" 3⁄8" 25⁄16" MN328-0079 $23.70 $11.29 3⁄16 3⁄8 7⁄16 25⁄16 MN328-0080 23.70 11.29 1⁄4 3⁄8 1⁄2 25⁄16 MN328-0081 23.70 11.29 5⁄16 3⁄8 9⁄16 25⁄16 MN328-0082 23.70 11.29 3⁄8 3⁄8 9⁄16 25⁄16 MN328-0096 23.70 11.29 7⁄16 3⁄8 13⁄16 21⁄2 MN328-0083 35.00 16.29 1⁄2 1⁄2 1 3 MN328-0084 36.98 17.29 5⁄8 5⁄8 15⁄16 37⁄16 MN328-0085 49.06 23.29 3⁄4 3⁄4 15⁄16 39⁄16 MN328-0086 56.07 26.29 4 Flute 1⁄8 3⁄8 3⁄8 25⁄16 MN328-0087 24.04 11.29 1⁄4 3⁄8 5⁄8 27⁄16 MN328-0089 24.04 11.29 3⁄8 3⁄8 3⁄4 21⁄2 MN328-0091 24.04 11.29 5⁄8 5⁄8 15⁄8 33⁄4 MN328-0094 49.51 23.29 3⁄4 3⁄4 15⁄8 37⁄8 MN328-0095 56.66 27.29

• Shank Dia.: +.0000/-.0003"• Cutting Dia.: +.000/-.001"

Tolerances

Carbide-Tipped Tool BitsRight & Left Hand Styles SAVE

25%In Pkg. Qty. Price Ea.

Ind. C2 Grade C6 Grade Less Than Pkg. No. Size Model # Model # Pkg. Qty. Qty. Style AR AR-4 1⁄4" MN383-0012 MN383-0015 $3.32 $2.49 AR-5 5⁄16 MN383-0022 MN383-0025 3.32 2.49 AR-6 3⁄8 MN383-0032 MN383-0035 3.32 2.49 AR-8 1⁄2 MN383-0052 MN383-0045 3.70 2.77 Style AL AL-4 1⁄4 MN383-0112 MN383-0115 3.32 2.49 AL-5 5⁄16 MN383-0122 MN383-0125 3.32 2.49 AL-6 3⁄8 MN383-0132 MN383-0135 3.32 2.49 AL-8 1⁄2 MN383-0152 MN383-0155 3.70 2.77

Style AR—Right hand for turning to square shoulder, cuts from right to leftStyle AL—Left hand for turning to square shoulder, cuts from left to right• C2 grade for cast iron and nonferrous materials• C6 grade for steel and steel alloys • Used for general machining operations such as

turning, boring and chamfering

Style AR

Style AL

10 BITS PERPACKAGE

• For general applications in ferrous materials• Designed for milling radius bottom slots,

fi llets and special contours

M-42 Cobalt Ball End MillsRegular & Long Lengths

Mill Shank No. of Reg Sale Dia. Dia. LOC OAL Flutes Model # Price Price 1⁄8" 3⁄8" 3⁄8" 25⁄16" 4 MN337-5888 $22.85 $16.95 1⁄4 3⁄8 5⁄8 21⁄2 4 MN337-5890 22.85 16.95 1⁄4 3⁄8 11⁄4 31⁄16 4 MN337-5893 29.11 21.95 5⁄16 3⁄8 3⁄4 21⁄2 4 MN337-5895 24.54 17.95 3⁄8 3⁄8 3⁄4 21⁄2 4 MN337-5896 24.54 17.95 3⁄8 3⁄8 1 23⁄4 4 MN337-5897 21.78 16.95 3⁄8 3⁄8 11⁄2 31⁄4 4 MN337-5898 31.17 23.95 3⁄8 3⁄8 21⁄2 41⁄4 4 MN337-5899 32.53 23.95 1⁄2 1⁄2 11⁄4 31⁄4 4 MN337-5900 31.91 23.95 1⁄2 1⁄2 2 4 4 MN337-5901 45.48 33.95 5⁄8 5⁄8 15⁄8 33⁄4 4 MN337-5903 42.49 31.95 3⁄4 3⁄4 15⁄8 37⁄8 4 MN337-5904 49.62 37.95 3⁄4 3⁄4 3 51⁄4 4 MN337-5905 64.64 48.95 1 1 2 41⁄2 4 MN337-5908 78.18 58.95 1 1 2 51⁄2 4 MN337-5909 104.63 78.95 1 1 4 61⁄2 4 MN337-5910 111.95 83.95 1 1 6 81⁄2 4 MN337-5911 168.06 126.95

SAVEUP TO

32%

30-31 HD 15-08 EM.indd 3030-31 HD 15-08 EM.indd 30 7/15/15 8:17 AM7/15/15 8:17 AM























































































End Mills

SAVEUP TO

65%

• 4 fl ute end mills are excellent for deep slotting applications and also for use on aluminum and nonferrous materials• Helical gash (helix through the ball) for reduced cutting force, excellent fi nish and better chip control

4 Flute Centercutting Carbide End MillsSquare & Ball End • Uncoated & TiAlN Coated

Square End TiAIN Coated

As Low As

$695

• Shank Dia.: +.0000/-.0003"• Cutting Dia.: +.000/-.001"

Tolerances

Ball End TiAlN Coated

Square End Square End Ball End Ball End Mill Shank Flute Uncoated Mfr’s Sale TiAIN Coated Mfr’s Sale Uncoated Mfr’s Sale TiAIN Coated Mfr’s Sale Dia. Dia. L OAL Model # List Price Model # List Price Model # List Price Model # List Price 1⁄16" 1⁄8" 3⁄16" 11⁄2" MN328-0019 $16.29 $6.95 MN328-0029 $20.56 $8.09 MN328-0039 $18.76 $8.09 MN328-0049 $23.01 $9.89 1⁄8 1⁄8 1⁄2 11⁄2 MN328-0020 16.29 6.95 MN328-0030 20.56 8.09 MN328-0040 18.76 8.09 MN328-0050 23.01 9.89 3⁄16 3⁄16 5⁄8 2 MN328-0021 23.46 8.09 MN328-0031 28.90 10.95 MN328-0041 26.98 11.75 MN328-0051 32.40 13.39 1⁄4 1⁄4 3⁄4 21⁄2 MN328-0022 29.68 11.09 MN328-0032 40.82 13.95 MN328-0042 34.13 14.79 MN328-0052 45.27 19.39 5⁄16 5⁄16 13⁄16 21⁄2 MN328-0023 34.47 14.95 MN328-0033 51.09 18.95 MN328-0043 39.67 16.95 MN328-0053 56.27 24.29 3⁄8 3⁄8 1 21⁄2 MN328-0024 46.47 20.95 MN328-0034 63.09 24.95 MN328-0044 53.46 22.95 MN328-0054 70.06 29.95 1⁄2 1⁄2 1 3 MN328-0025 78.81 30.95 MN328-0035 99.92 34.95 MN328-0045 90.64 38.95 MN328-0055 111.74 47.95 5⁄8 5⁄8 11⁄4 31⁄2 MN328-0026 131.83 53.95 MN328-0036 162.45 63.95 MN328-0046 151.60 65.95 MN328-0056* 182.23 78.95 3⁄4 3⁄4 11⁄2 4 MN328-0027 193.13 74.95 MN328-0037 229.30 85.95 MN328-0047 222.09 96.95 MN328-0057 258.28 108.00 1 1 11⁄2 4 MN328-0028 357.68 139.95 MN328-0038 411.02 159.95 MN328-0048 411.35 175.00 MN328-0058 464.68 189.00*LOC: 7⁄8", OAL: 3"

SAVEUP TO

60%

M-42 Cobalt Single End Mills2 & 4 Flute

2 Flute: List 5204 Flute: List 54030° Helix

As Low As

$12292 Flute 4 Flute

Mill Shank Flute 2 Flute Mfr’s Sale Flute 4 Flute Mfr’s Sale Dia. Dia. L OAL Model # List Price L OAL Model # List Price 1⁄8" 3⁄8" 3⁄8" 25⁄16" MN319-1934 $30.50 $12.29 3⁄8" 25⁄16" MN319-2239 $30.99 $12.29 3⁄16 3⁄8 7⁄16 25⁄16 MN319-1936 30.50 12.29 1⁄2 23⁄8 MN319-2241 30.99 12.29 1⁄4 3⁄8 1⁄2 25⁄16 MN319-1938 30.50 12.29 5⁄8 27⁄16 MN319-2243 30.99 12.29 5⁄16 3⁄8 — 3⁄4 21⁄2 MN319-2245 30.99 12.29 3⁄8 3⁄8 9⁄16 25⁄16 MN319-1942 30.50 12.29 3⁄4 21⁄2 MN319-2247 30.99 12.29 5⁄8 1⁄2 11⁄8 31⁄8 MN319-1951 62.22 25.29 — 5⁄8 5⁄8 15⁄16 37⁄16 MN319-1956 63.18 25.29 15⁄8 33⁄4 MN319-2261 63.81 25.29 3⁄4 1⁄2 — 15⁄8 35⁄8 MN319-2260 70.31 28.29 3⁄4 3⁄4 — 15⁄8 37⁄8 MN319-2270 72.92 29.29 7⁄8 3⁄4 11⁄2 33⁄4 MN319-1964 82.98 33.29 — 1 3⁄4 — 17⁄8 41⁄8 MN319-2274 103.60 41.29 1 1 15⁄8 41⁄8 MN319-1970 107.15 43.29 2 41⁄2 MN319-2278 109.57 44.29

4 Flute Carbide Double End MillsCentercutting • Uncoated, TiN & TiAlN Coated

Stub & Regular Length • Higher rake and 30° helix angle

TiN Coated• General-purpose use • Extends tool life • Used for aggressive machining of steels• Provides increase of 25 to 30% in machining

speeds vs. uncoated tools

TiAIN Coated (Titanium Aluminum Nitride)• Recommended for diffi cult-to-machine materials• Used for aggressive machining of stainless steels,

high-alloy carbon steels, nickel-based, high-temperature alloys and titanium alloys

• Provides increase of 75 to 100% in machining speeds vs. uncoated tools

TiN Coated TiAlN Coated

Uncoated

As Low As

$969

Mill Shank Uncoated Low TiN Coated Low TiAlN Coated Low Dia. Dia. LOC OAL Model # Price Model # Price Model # Price 1⁄16" 1⁄8" 1⁄8" 11⁄2" MN322-8004 $9.69 MN890-9641 $13.95 MN308-0204 $11.79 1⁄8 3⁄16 1⁄4 2 MN326-0049 11.99 MN891-7053 9.99 MN308-0205 10.49 1⁄8 3⁄8 3⁄8 31⁄16 MN325-2493 23.99 MN325-2561 30.99 MN619-1466 28.79 3⁄16 3⁄16 3⁄8 2 MN322-8012 11.99 MN891-7054 12.99 MN308-0206 13.99 1⁄4 1⁄4 1⁄2 21⁄2 MN322-8016 15.99 MN891-7055 18.99 MN308-0207 18.99 1⁄4 3⁄8 5⁄8 31⁄2 MN325-2497 23.99 MN325-2563 38.95 MN619-1470 38.99 5⁄16 5⁄16 1⁄2 21⁄2 MN322-8020 19.99 MN890-9642 24.99 MN619-1472 23.99 3⁄8 3⁄8 3⁄4 31⁄2 MN325-2499 30.99 MN325-2564 36.95 MN317-4670 37.99 1⁄2 1⁄2 5⁄8 3 MN322-8032 35.99 MN891-7057 54.99 MN308-0209 39.99

30-31 HD 15-08 EM.indd 3130-31 HD 15-08 EM.indd 31 7/15/15 8:17 AM7/15/15 8:17 AM






















































































http://use-enco.com

http://use-enco.com



End Mills/Saws

Face Hole Made in USA Reg. Sale KEO Reg. Sale W Size Model # Price Price Model # Price Price 21⁄2" Saw Dia. – 28 Teeth 1⁄16" 7⁄8" MN414-0739 $76.01 $60.80 MN414-0780 $78.48 $62.79 3⁄32 7⁄8 MN893-2060 57.24 45.79 MN414-0781 78.48 62.79 1⁄8 7⁄8 MN317-0538 63.84 51.00 — 3" Saw Dia. – 32 Teeth 1⁄16 1 MN893-2061 68.01 54.40 MN414-0782 94.27 75.40 5⁄64 1 MN893-2062 89.16 71.30 — 3⁄32 1 MN317-0539 76.04 60.80 MN414-0783 94.27 75.40 7⁄64 1 MN893-2063 89.16 71.30 — 1⁄8 1 MN317-0613 76.04 60.80 MN414-0784 94.27 75.40 9⁄64 1 MN893-2064 91.23 72.99 — 5⁄32 1 MN317-0540 76.73 61.39 MN414-0785 94.27 75.40 11⁄64 1 MN414-0740 136.37 109.10 — 3⁄16 1 MN893-2065 99.59 79.69 MN414-0786 137.47 109.99 7⁄32 1 MN414-0741 144.10 115.29 — 1⁄4 1 MN414-0742 140.38 112.30 — 4" Saw Dia. – 36 Teeth 1⁄16 1 MN893-2066 88.99 71.19 MN414-0787 123.27 98.60 1⁄16 11⁄4 MN414-0743 156.37 125.10 MN414-0788 161.42 129.19 5⁄64 1 MN317-0541 136.74 109.39 — 5⁄64 11⁄4 MN414-0744 171.73 137.39 — 3⁄32 1 MN893-2067 88.99 71.19 MN414-0789 123.27 98.60 3⁄32 11⁄4 MN414-0745 167.66 134.10 — 7⁄64 1 MN414-0746 178.51 142.80 — 7⁄64 11⁄4 MN414-0747 174.74 139.79 — 1⁄8 1 MN893-2068 89.61 71.69 MN414-0790 124.03 99.20 1⁄8 11⁄4 MN414-0748 169.79 135.80 — 9⁄64 1 MN893-2069 134.03 107.20 — 9⁄64 11⁄4 MN414-0749 188.24 150.59 — 5⁄32 1 MN893-2070 92.95 74.39 MN414-0791 128.72 102.99 5⁄32 11⁄4 MN414-0750 177.16 141.70 — 11⁄64 1 MN414-0751 188.24 150.59 — 11⁄64 11⁄4 MN414-0752 193.53 154.80 — 3⁄16 1 MN893-2071 96.30 77.00 MN414-0792 133.39 106.70 3⁄16 11⁄4 MN414-0753 169.62 135.70 — 7⁄32 1 MN414-0754 182.06 145.65 — 7⁄32 11⁄4 MN414-0755 185.77 148.60 — 1⁄4 1 MN414-0756 183.81 147.00 MN414-0793 182.66 146.15 1⁄4 11⁄4 MN414-0757 183.81 147.00 — 5" Saw Dia. – 40 Teeth 1⁄16 1 — MN414-0794 157.35 125.89 3⁄32 1 MN317-0542 130.94 104.75 MN414-0795 162.20 129.79 3⁄32 11⁄4 MN414-0758 216.41 173.10 — 1⁄8 1 MN893-2072 120.24 96.19 MN414-0796 166.70 133.39 1⁄8 11⁄4 MN414-0759 161.48 129.19 MN414-0797 166.70 133.39 5⁄32 1 MN317-0543 138.58 110.89 MN414-0798 171.74 137.39 3⁄16 1 MN893-2073 126.27 101.00 MN414-0799 175.07 140.00 3⁄16 11⁄4 MN414-0761 216.50 173.20 MN414-0800 223.55 178.80 7⁄32 1 MN414-0762 225.93 180.75 — 1⁄4 1 MN414-0764 236.89 189.50 MN414-0801 237.57 190.00 1⁄4 11⁄4 MN414-0765 244.72 195.79 — 6" Saw Dia. – 48 Teeth 1⁄16 1 — MN414-0802* 190.84 152.69 3⁄32 1 MN893-2074 143.82 115.00 MN414-0803* 202.71 162.19 3⁄32 11⁄4 MN414-0766 307.22 245.79 — 1⁄8 1 MN893-2075 150.53 120.40 MN414-0804* 212.06 169.65 1⁄8 11⁄4 MN317-0544 168.47 134.79 MN414-0805* 212.06 169.65 9⁄64 11⁄4 MN414-0769 326.87 261.50 — 5⁄32 1 MN414-0770 306.42 245.10 — 11⁄64 1 MN414-0771 308.09 246.49 — 11⁄64 11⁄4 MN414-0772 308.09 246.49 — 3⁄16 1 MN317-0545 184.67 147.75 — 7⁄32 1 MN414-0774 290.40 232.32 — 7⁄32 11⁄4 MN414-0775 290.40 232.30 — 1⁄4 1 MN414-0776 297.57 238.00 — 1⁄4 11⁄4 MN414-0777 307.43 245.90 — 3⁄8 1 MN414-0778 345.78 276.60 —*42 teeth

HSS Straight Tooth Slitting Saws

• Side chip clearance for deeper sawing and slotting, while maintaining accurate width of cut

• Suitable for all materials• To avoid binding in the

cut, saws are ground with slight concavity

As Low As

$4579

SAVE20%

As Low As

$1509 Mill Shank Reg. Sale Dia. Dia. LOC OAL Model # Price Price 1⁄4" 3⁄8" 5⁄8" 27⁄16" MN320-1400 $20.97 $15.09 5⁄16 3⁄8 23⁄32 215⁄32 MN320-1410 23.34 17.09 3⁄8 3⁄8 3⁄4 21⁄2 MN320-1420 23.34 17.09 7⁄16 3⁄8 11⁄32 223⁄32 MN619-2300 31.46 22.09 1⁄2 1⁄2 11⁄4 31⁄4 MN320-1430 31.46 22.09 9⁄16 1⁄2 113⁄32 313⁄32 MN619-2301 42.60 31.09 5⁄8 5⁄8 15⁄8 33⁄4 MN320-1440 45.52 33.09 11⁄16 5⁄8 121⁄32 325⁄32 MN319-1441 57.49 42.09 3⁄4 3⁄4 111⁄16 315⁄16 MN320-1450 53.67 39.09 13⁄16 3⁄4 129⁄32 45⁄32 MN319-1442 73.26 53.09 7⁄8 3⁄4 115⁄16 43⁄16 MN319-1443 73.26 53.09 15⁄16 3⁄4 131⁄32 47⁄32 MN319-1444 94.94 69.09 1 3⁄4 2 41⁄4 MN619-2302 86.21 63.09

2 Flute M-42 Cobalt 90° Single End Drill Mills

• For drilling, slotting, chamfering and profi le milling

• 90° point angle

5 Pc. Fly-Tool Cutter Set

• Counterbalanced, hardened steel • Uses 3⁄16-1⁄2" standard

tool bits (not included)• 1⁄2 & 5⁄8" straight shankIncludes one of each: 3⁄4, 11⁄8, 13⁄8, 2, 21⁄2" head diameter.



SAVE20%

For Bridgeport®-Type Mills

• 1⁄16 - 3⁄8"



8 Pc. HSS Corner Rounding End Mill Set

SAVE36%

32-33 HD 15-08 EMS_SBB.indd 3232-33 HD 15-08 EMS_SBB.indd 32 7/15/15 8:18 AM7/15/15 8:18 AM








































































































Saws/Broaches/Burs

SAVEUP TO

44%

Carbide 1⁄4" Shank BursSingle & Double Cut• Hardened steel shanks

except 1⁄4" and 3⁄16" dia., which are solid carbide

Ind. Cutter Single Cut Double Cut Reg. Sale No. Dia. L Model # Model # Price Price A. Cylindrical Ball Nose Burs SC-1 1⁄4" 5⁄8" MN317-0267 MN317-0276 $12.16 $7.49 SC-3 3⁄8 3⁄4 MN317-0269 MN317-0278 16.35 10.79 SC-5 1⁄2 1 MN317-0271 MN317-0280 26.00 16.79 B. Cylindrical Burs SA-1 1⁄4 5⁄8 MN317-0210 MN317-0220 10.43 6.49 SA-3 3⁄8 3⁄4 MN317-0212 MN317-0222 14.96 9.49 SA-5 1⁄2 1 MN317-0214 MN317-0224 22.95 14.79 C. Cylindrical End Cut Burs SB-1 1⁄4 5⁄8 MN317-0231 MN317-0237 11.41 7.29 SB-5 1⁄2 1 MN317-0234 MN317-0241 25.95 16.49 D. 14° Included Angle Burs SL-1 1⁄4 5⁄8 MN317-0326 MN317-0332 13.36 8.39 SL-3 3⁄8 11⁄16 MN317-0328 MN317-0334 20.85 13.99 SL-4 1⁄2 11⁄8 MN317-0329 MN317-0335 25.21 13.99 E. Ball Shape Burs SD-14 3⁄16 1⁄8 MN317-0245 MN317-0255 11.29 7.29 SD-1 1⁄4 7⁄32 MN317-0246 MN317-0256 11.29 7.29 SD-3 3⁄8 5⁄16 MN317-0248 MN317-0258 13.69 8.49 SD-5 1⁄2 7⁄16 MN317-0250 — 18.62 11.99

A

B

C

D

E

Starting At

$649

Bi-Metal Hole Saw Kits

• Master Cobalt® bi-metal design uses an electron beam to weld M3 high-speed steel cutting edge to a tough steel backer. 11⁄2" cutting depth

Mechanic’s Kit— 7⁄8, 1, 11⁄8, 11⁄4 & 11⁄2" saws, arbor to fi t 3⁄8" chuck size. Maintenance Kit— 3⁄4, 7⁄8, 11⁄8, 13⁄8, 11⁄2, 13⁄4, 2, 21⁄4 & 21⁄2" saws, 3 arbors for 1⁄4" and 1⁄2" chuck size, and 1⁄2" pin drive chuck size, 12" extension.Electrician’s Kit— 7⁄8, 11⁄8, 13⁄8, 13⁄4, 2 & 21⁄2" saws, 2 arbors for 1⁄2" chuck size. Plumber’s Kit — 3⁄4, 7⁄8, 11⁄8, 11⁄2, 13⁄4 & 21⁄4" saws, 2 arbors for 1⁄2" standard & pin chuck size.Industrial Kit— 3⁄4, 7⁄8, 11⁄8, 13⁄8, 11⁄2, 13⁄4, 2, 21⁄4, 21⁄2, 3, 31⁄4, 35⁄8, 33⁄4, 41⁄4 & 41⁄2" saws, 3 arbors for 1⁄4" & 1⁄2" chuck size, 12" extension. *Steel carrying case

Reg. Sale Kit Model # Price Price Mechanic’s MN990-0589 $59.89 $29.95 Maintenance MN371-4095 165.64 79.95 Electrician’s MN990-0591 120.99 59.95 Plumber’s MN990-0592 116.30 51.95 Industrial MN990-0593* 345.39 159.95

Assembled from superior bi-metal hole saws, together with arbors.

Starting At

$2995

High-density polyethylene case included

SAVEUP TO

27%

HSS Keyway Broach Sets

• Sets include all necessary shims No. 00 Precision SetCuts 15 different keyways for small keyways and bores. Consists of: 3 broaches: A—1⁄16, 3⁄32, 1⁄8"; 5 collared bushings: A—1⁄4, 5⁄16, 3⁄8, 7⁄16 and 1⁄2"No. 10 Standard SetCuts 18 different keyways. Consists of: 4 broaches: 1⁄8 B, 3⁄16 B, 1⁄4 C, 3⁄8" C; 9 collared bushings: B—1⁄2, 5⁄8, 3⁄4, 7⁄8" and C—1, 11⁄8, 11⁄4, 13⁄8 and 11⁄2"No. 10-10A Combination Set Cuts 36 different keyways. Consists of: 4 broaches:B—1⁄8 and 3⁄16", C—1⁄4 and 3⁄8"; 18 collared bushings:B—1⁄2, 9⁄16, 5⁄8, 11⁄16, 3⁄4, 13⁄16 and 7⁄8"; C—15⁄16, 1, 11⁄16,11⁄8, 13⁄16, 11⁄4, 15⁄16, 13⁄8, 17⁄16, 11⁄2 and 19⁄16" No. 20 Combination Set Cuts 47 different keyways. Consists of: 5 broaches: B—1⁄8 and 3⁄16", C—1⁄4, 5⁄16 and 3⁄8"; 18 collared bushings:B—1⁄2, 9⁄16, 5⁄8, 11⁄16, 3⁄4, 13⁄16 and 7⁄8"; C—15⁄16, 1, 11⁄16,11⁄8, 13⁄16, 11⁄4, 15⁄16, 13⁄8, 17⁄16, 11⁄2 and 19⁄16"

duMONT

Ind. Import Reg. Sale duMONT Mfr’s Sale No. Model # Price Price Model # List Price 00 MN307-2793 $96.10 $78.99 MN395-0100 $200.00 $162.00 10 MN307-2794 171.46 124.99 MN395-0200 350.00 284.00 10-10A MN307-2795 220.61 178.99 MN395-0300 450.00 364.00 20 MN307-2796 253.37 198.99 MN422-1484 518.00 420.00

As Low As

$7899Import

TPI/ Mfr’s Sale L W Thick. Set Model # List Price 5' 41⁄2" 1⁄2" 0.025" 6/S MN990-0347 $14.66 $9.99 5' 41⁄2" 1⁄2 0.025 10/S MN990-0348 14.66 9.99 5' 41⁄2" 1⁄2 0.025 14/S MN990-0349 14.66 9.99 5' 41⁄2" 1⁄2 0.025 18/W MN990-0351 14.66 9.99 5' 41⁄2" 1⁄2 0.025 24/W MN990-0352 14.66 9.99 7' 9" 3⁄4 0.032 6/S MN990-0381 22.18 13.99 7' 9" 3⁄4 0.032 10/S MN990-0382 22.18 13.99 8' 11" 3⁄4 0.032 10/S MN990-0414 23.89 14.99 9' 3⁄4 0.032 10/S MN990-0418 23.89 14.99 9' 71⁄2" 3⁄4 0.032 10/S MN990-0424 25.60 15.99 9' 71⁄2" 3⁄4 0.032 14/S MN990-0425 25.60 15.99 10' 101⁄2" 3⁄4 0.032 8/S MN990-0443 27.31 16.99 11' 1 0.035 6/S MN990-0452 31.05 19.99 11' 1 0.035 10/S MN990-0454 31.05 19.99 11' 1 0.035 14/S MN990-0455 31.05 19.99 11' 6" 3⁄4 0.032 10/S MN990-0460 28.17 17.99 11' 6" 3⁄4 0.032 14/S MN990-0461 28.17 17.99 11' 6" 1 0.035 10/S MN990-0465 32.08 20.99 12' 6" 1⁄2 0.025 6/S MN990-0471 23.13 14.99 12' 6" 1⁄2 0.025 14/S MN990-0478 23.13 14.99 12' 6" 1 0.035 6/S MN990-0483 34.13 21.99S=Straight Tooth, W=Wavy Tooth

Flex-Back Bandsaw BladesPre-Welded

• Made from carbon steel with a fl exible back for general-purpose cutting

• Teeth precisely hardened• Absorbs stresses on

contour cutting• Suitable for wood and wood

composites, plastics, most nonferrous foundry-type metals and mild steel

SAVEUP TO

37%Starting At

$999

32-33 HD 15-08 EMS_SBB.indd 3332-33 HD 15-08 EMS_SBB.indd 33 7/15/15 8:18 AM7/15/15 8:18 AM
































































http://use-enco.com



Drills/Reamers

Carbide 135° Split Point Screw Machine DrillsSlow Spiral

• Carbide provides superior wear resistance• Can withstand the highest cutting temperatures

in a higher degree of dimensional accuracy• For use in stainless steels, nickel-based and

titanium alloys, aluminum, cast iron, bronze and magnesium

• 135° self-centering split point prevents “walking”

Flute Low Size L OAL Model # Price 1⁄16" 5⁄8" 15⁄8" MN619-0842 $9.49 5⁄64 11⁄16 111⁄16 MN619-0843 9.99 3⁄32 3⁄4 13⁄4 MN619-0844 10.19 7⁄64 13⁄16 113⁄16 MN619-0845 11.99 1⁄8 7⁄8 17⁄8 MN619-0846 12.19 9⁄64 15⁄16 115⁄16 MN619-0847 14.49 5⁄32 1 21⁄16 MN619-0848 15.29 11⁄64 11⁄16 21⁄8 MN619-0849 19.99 3⁄16 11⁄8 23⁄16 MN619-0850 17.99 13⁄64 13⁄16 21⁄4 MN619-0851 23.49 7⁄32 11⁄4 23⁄8 MN619-0852 22.99 15⁄64 15⁄16 27⁄16 MN327-0945 28.99 1⁄4 13⁄8 21⁄2 MN619-0853 25.99 17⁄64 17⁄16 25⁄8 MN619-0854 36.99 9⁄32 11⁄2 211⁄16 MN317-5437 37.99 19⁄64 19⁄16 23⁄4 MN619-0855 41.99 5⁄16 15⁄8 213⁄16 MN619-0856 37.99 21⁄64 111⁄16 215⁄16 MN327-0946 44.49 11⁄32 111⁄16 3 MN619-0857 52.99 23⁄64 13⁄4 31⁄16 MN317-5438 53.99 3⁄8 113⁄16 31⁄8 MN619-0858 59.99 25⁄64 17⁄8 31⁄4 MN327-0947 65.99 13⁄32 115⁄16 35⁄16 MN317-5439 67.99 7⁄16 21⁄16 37⁄16 MN619-0859 69.99 29⁄64 21⁄8 39⁄16 MN327-0949 89.99 1⁄2 21⁄4 33⁄4 MN619-0860 94.99

SAVEUP TO

67%

Size Range Sizes No. of Reg. Sale Min. Max. Included Pcs. Model # Price Price 1⁄4" 3⁄8" 8/A to 5/A 4 MN890-8857 $58.96 $18.99 3⁄8 15⁄32 4/A to 2/A 3 MN890-8858 44.76 15.99 3⁄8 27⁄32 4/A to M 16 MN890-9542 348.40 179.99 15⁄32 11⁄16 A to H 8 MN890-8859 125.59 65.99 15⁄32 11⁄2 A to K 11 MN334-1000 220.61 109.99

HSS Adjustable Blade Reamer Sets

• Supplied in a wooden case

Starting At

$1599

Flute Reg. Sale Size L OAL Model # Price Price 5⁄64" 3⁄8" 19⁄32" MN327-1630 $26.16 $21.95 1⁄8 1⁄2 11⁄2 MN327-1628 29.47 24.95 3⁄16 3⁄4 2 MN327-1629 40.39 32.95 1⁄4 1 11⁄2 MN327-1627 52.40 39.95 7 Pc. Set MN317-6192 148.52 109.95

• Saves expensive parts • Advanced point geometry• Tough micrograin

carbide easily cuts through tool steel

7 Pc. Set includes:• 4 drill sizes:

5⁄64, 1⁄8, 3⁄16 & 1⁄4" • Pin vise with 2 picks • For tap sizes

#4 to 1⁄2" and M3 to M12

Carbide Tap Removing Drills & Drill Set

7 Pc. Set Only

$10995

SAVEUP TO

26%

135° Split Point Cobalt DrillsJobber & Screw Machine

Screw Machine DrillJobber Drill

Jobber Drills• 135° self-centering split point prevents “walking”Screw Machine Drills• Shorter lengths compared to jobber drills (also known as stub drills)Cobalt• When used in applications that generate higher temperatures, cobalt retains its

strength and hardness while offering more abrasion resistance than HSS• For use in alloy steel, malleable cast iron, titanium and nickel alloys

*Sold in pkg. qty. of 12 only

Flute Jobber Drills Mfr’s Sale Flute Screw Machine Drills Mfr’s Sale Dia. L OAL Model # List Price L OAL Model # List Price 1⁄16" 7⁄8" 17⁄8" MN317-8366* $3.86 $1.76 5⁄8" 15⁄8" MN319-0643* $3.39 $1.55 5⁄64 1 2 MN317-8367* 3.86 1.76 11⁄16 111⁄16 MN319-0644* 3.41 1.56 3⁄32 11⁄4 21⁄4 MN317-8368* 3.86 1.76 3⁄4 13⁄4 MN319-0645* 3.39 1.55 7⁄64 11⁄2 25⁄8 MN317-8369 4.06 1.86 13⁄16 113⁄16 MN319-0646 3.85 1.75 1⁄8 15⁄8 23⁄4 MN317-8370 4.91 2.25 7⁄8 17⁄8 MN319-0647 4.41 2.02 9⁄64 13⁄4 27⁄8 MN317-8371 4.96 2.27 15⁄16 115⁄16 MN319-0648 4.46 2.04 5⁄32 2 31⁄8 MN317-8372 5.56 2.54 1 21⁄16 MN319-0649 4.85 2.22 11⁄64 21⁄8 31⁄4 MN317-8373 5.88 2.68 11⁄16 21⁄8 MN319-0650 5.50 2.51 3⁄16 25⁄16 31⁄2 MN317-8374 6.54 2.99 11⁄8 23⁄16 MN319-0651 6.44 2.94 13⁄64 27⁄16 35⁄8 MN317-8375 7.88 3.60 13⁄16 21⁄4 MN319-0652 7.35 3.36 7⁄32 21⁄2 33⁄4 MN317-8376 8.65 3.95 11⁄4 23⁄8 MN319-0653 8.10 3.70 15⁄64 25⁄8 37⁄8 MN317-8377 9.18 4.20 15⁄16 27⁄16 MN319-0654 8.98 4.11 1⁄4 23⁄4 4 MN317-8378 9.70 4.44 13⁄8 21⁄2 MN319-0655 9.00 4.12 17⁄64 27⁄8 41⁄8 MN317-8379 11.05 5.07 17⁄16 25⁄8 MN319-0656 10.55 4.84 9⁄32 215⁄16 41⁄4 MN317-8380 11.60 5.32 11⁄2 211⁄16 MN319-0657 11.15 5.12 5⁄16 33⁄16 41⁄2 MN317-8382 15.10 6.92 15⁄8 213⁄16 MN319-0659 13.90 6.35 3⁄8 35⁄8 5 MN317-8386 20.85 9.55 113⁄16 31⁄8 MN319-0663 19.25 8.77 13⁄32 37⁄8 51⁄4 MN317-8388 24.90 11.40 115⁄16 35⁄16 MN319-0665 22.75 10.40 7⁄16 41⁄16 51⁄2 MN317-8390 28.15 12.90 21⁄16 37⁄16 MN319-0667 25.85 11.80 1⁄2 41⁄2 6 MN317-8394 35.10 16.07 21⁄4 33⁄4 MN319-0671 30.90 14.15

SAVE54%

As Low As

$155

135° Split Point 6" Aircraft Extension DrillsCobaltUsed to drill normal depth holes in hard-to-reach places, such as in airframe work and pulley hubs.• Cobalt provides better wear

resistance in hardness and toughness compared to HSS

• For use in high-tensile alloys, titanium, cast iron, Inconel and high-nickel stainless steels

Flute Mfr’s Sale Size L Model # List Price 1⁄16" 7⁄8" MN317-8694 $10.80 $4.59 5⁄64 1 MN317-8695 10.90 4.59 3⁄32 11⁄4 MN317-8696 8.44 3.59 1⁄8 15⁄8 MN317-8698 9.09 3.59 5⁄32 2 MN317-8700 10.65 4.59 3⁄16 25⁄16 MN317-8702 11.55 4.59 13⁄64 27⁄16 MN317-8703 14.70 6.59 7⁄32 21⁄2 MN317-8704 14.55 6.59 1⁄4 23⁄4 MN317-8706 15.70 6.59

SAVEUP TO

60%

34-35 HD 15-08 DRC.indd 3434-35 HD 15-08 DRC.indd 34 7/15/15 8:19 AM7/15/15 8:19 AM






















































































Service 800-USE-ENCO


Drills/Countersinks

Special 3-fl at shank eliminates slippage in drill chuck; provides a positive grip in cordless, keyless and conventional power tools.• 135° split point for quick penetration

and reduced “walking”• Ideal for drilling in a wide variety of

materials, including high-carbon steel, stainless steel, woods and plastics

• Bronze/black-oxide fi nish • Metal index case

Trinado™

HSS Drill SetsNo-Slip Design

No. of Mfr’s Sale Pcs. Sizes Model # List Price 13 1⁄16-1⁄4" x 64ths MN240-6982 $40.33 $18.49 15 1⁄16-1⁄2 x 32nds MN240-6983 112.41 51.99 21 1⁄16-3⁄8 x 64ths MN240-6984 100.87 46.49 29 1⁄16-1⁄2 x 64ths MN240-6985 209.91 96.99

SAVEUP TO

54%Starting At

$1849

SAVEUP TO

62% Drill Mfr’s Sale Material Point Grade Model # List Price 26 Pc. Drill Sets, A-Z HSS Bright 118° General-Purpose MN317-9913 $292.00 $131.00 Cobalt 135 Split Heavy-Duty MN317-9918 485.00 217.00 29 Pc. Drill Sets, 1⁄16-1⁄2" x 64ths HSS Bright 118 General-Purpose MN317-9912 260.00 99.95 HSS Black Oxide 135 Split Heavy-Duty MN317-9915 258.00 95.95 Cobalt 135 Split Heavy-Duty MN317-9919 428.00 159.95 60 Pc. Drill Sets, #60-1 Wire Gage HSS Bright 118 General-Purpose MN317-9914 227.00 99.00 HSS Black Oxide 135 Split Heavy-Duty MN317-9916 220.00 85.95 Cobalt 135 Split Heavy-Duty MN317-9917 331.00 148.00

Screw Machine Length Drill Sets• 118° point for quick penetration • 135° self-centering split point prevents “walking” • Case included

29 Pc. Black Oxide Set

As Low As

$8595

HSS 118° Jobber DrillsBright Finish and Black Oxide Treated

• Improves chip fl ow in low- carbon steels and soft nonferrous materials

Black Oxide• Reduces the amount of

chip welding • Increases abrasion resistance

SAVE25%

On Qty.: 12+

As Low As

98¢Each 12+

Flute Bright Finish Price Each Black Oxide Price Each Size L OAL Model # 1-11 12+ Model # 1-11 12+ 1⁄16" 7⁄8" 17⁄8" MN317-7408 $1.36 $1.02 MN317-7364 $1.31 $ .98 3⁄32 11⁄4 21⁄4 MN317-7410 1.37 1.03 MN317-7366 1.37 1.03 7⁄64 11⁄2 25⁄8 MN317-7411 1.38 1.03 MN317-7367 1.38 1.03 1⁄8 15⁄8 23⁄4 MN317-7412 1.40 1.05 MN317-7368 1.40 1.05 9⁄64 13⁄4 27⁄8 MN317-7413 1.51 1.13 MN317-7369 1.51 1.13 5⁄32 2 31⁄8 MN317-7414 1.76 1.32 MN317-7370 1.76 1.32 3⁄16 25⁄16 31⁄2 MN317-7416 2.03 1.52 MN317-7372 2.03 1.52 13⁄64 27⁄16 35⁄8 MN317-7417 2.24 1.68 MN317-7373 2.24 1.68 1⁄4 23⁄4 4 MN317-7420 2.64 1.98 MN317-7376 2.72 2.04 17⁄64 27⁄8 41⁄8 MN317-7421 3.09 2.32 MN317-7377 3.09 2.32 9⁄32 215⁄16 41⁄4 MN317-7422 3.29 2.47 MN317-7378 3.29 2.47 5⁄16 33⁄16 41⁄2 MN317-7424 4.10 3.07 MN317-7380 4.10 3.07 3⁄8 35⁄8 5 MN317-7428 6.01 4.51 MN317-7384 6.01 4.51 1⁄2 41⁄2 6 MN317-7436 10.80 8.10 MN317-7392 10.82 8.11

HSS & Cobalt Combined Drills & Countersinks60°, 82° & 90°

KEO Interstate Body Drill 60° Reg. Sale 82° HSS 90° HSS Reg. Sale Size Dia. L OAL Model # Price Price Model # Model # Price PriceHSS #1 1⁄8" 3⁄64" 11⁄4" MN369-1836 $6.00 $4.20 MN369-1764 — $5.55 $3.75 #2 3⁄16 5⁄64 17⁄8 MN369-1841 6.28 4.39 MN369-1766 MN369-1782 5.68 3.83 #3 1⁄4 7⁄64 2 MN369-1846 6.53 4.57 MN369-1768 MN369-1784 5.85 3.95 #4 5⁄16 1⁄8 21⁄8 MN369-1851 6.74 4.71 MN369-1770 MN369-1786 6.08 4.10 #5 7⁄16 3⁄16 23⁄4 MN369-1856 9.58 6.70 MN369-1772 MN369-1788 9.32 6.30 #6 1⁄2 7⁄32 3 MN369-1861 16.02 11.21 MN369-1774 MN369-1790 14.14 9.56 #7 5⁄8 1⁄4 31⁄4 MN369-1866 24.36 17.05 MN369-1776 MN369-1792 19.33 13.07 #8 3⁄4 5⁄16 31⁄2 MN369-1871 33.44 23.40 MN369-1778 MN369-1794 27.88 18.49Cobalt #2 3⁄16 5⁄64 17⁄8 — MN369-1732 — 7.78 5.26 #3 1⁄4 7⁄64 2 — MN369-1734 MN369-1752 8.04 5.43 #4 5⁄16 1⁄8 21⁄8 — MN369-1736 MN369-1754 8.14 5.50 #5 7⁄16 3⁄16 23⁄4 — — MN369-1756 12.04 8.14 #6 1⁄2 7⁄32 3 — — MN369-1758 19.17 12.96 #7 5⁄8 1⁄4 31⁄4 — MN369-1742 MN369-1760 26.33 17.81 #8 3⁄4 5⁄16 31⁄2 — MN369-1744 MN369-1762 37.74 25.00

SAVEUP TO

33%

SAVEOVER

35%

HSS 6 Flute Chatterless Countersinks82 & 90°

Good wear resistance in mild steels and nonferrous materials such as plastics, aluminum, copper, brass, bronze, rubber and wood.• Blackened surface treatment prolongs tool

life and prevents galling• Can be used on all types of machine setups• Provides the highest feed rates of all

countersinks• Provides a longer life as cutting load is

distributed across more edges Shank 82° 90° Mfr’s Sale Size Dia. OAL Model # Model # List Price 1⁄4" 1⁄4" 2" MN308-0423 MN308-0432 $9.82 $5.89 3⁄8 1⁄4 2 MN308-0424 MN308-0433 12.15 7.29 1⁄2 3⁄8 2 MN308-0425 MN308-0434 15.01 9.19 5⁄8 3⁄8 21⁄4 MN308-0426 MN308-0435 21.67 12.99 3⁄4 1⁄2 23⁄4 MN308-0427 MN308-0436 29.71 17.99 1 1⁄2 23⁄4 MN308-0428 MN308-0437 45.40 27.99

As Low As

$589
























































































http://use-enco.com


Drills/Countersinks Shop the Enco Master Catalog

Drill Sets

MN337-2218

As Low As

$59 No. of Reg. Sale Description Pcs. Material Sizes Model # Price Price Silver & Deming - 1⁄2" Shank 8 HSS 9⁄16 - 1" x 16ths MN337-2847 $226.33 $128.95 Silver & Deming - 1⁄2" Shank 33 HSS 1⁄2 - 1 x 64ths MN337-2853 645.45 567.00 Screw Machine Length - 118° Point 29 HSS-Bright 1⁄16 - 1⁄2 x 64ths MN337-2804 86.83 64.95 Screw Machine Length - 135° Split Point 60 HSS-Black Oxide #60-1 MN337-2812 74.89 59.00 Screw Machine Length - 135° Split Point 60 Cobalt-Bright #60-1 MN337-2814 117.25 93.00 Screw Machine Length - 135° Split 115 Cobalt 1⁄16 - 1⁄2, 1-60, A-Z MN337-2218 513.28 410.00 Jobber Length - 118° Point 7 Carbide 1⁄8 - 1⁄2 MN404-0651* 262.00 209.00 Jobber Length - 118° Point 7 Carbide TiN Coated 1⁄8 - 1⁄2 MN404-0652* 295.73 236.00 Jobber Length - 118° Point 25 HSS-Black Oxide 1 - 13 x 0.5mm MN337-2206 101.39 69.95*Case not included

SAVEUP TO

43%

Shank Included Angle Model # Low Size Dia. OAL 82° 90° Price 1⁄4" 1⁄4" 11⁄2" MN369-0120 MN369-0121 $4.13 5⁄16 1⁄4 11⁄2 MN369-0130 MN369-0131 4.34 3⁄8 1⁄4 13⁄4 MN369-0140 — 4.73 1⁄2 1⁄4 2 MN369-0150 MN369-0151 5.79 5⁄8 1⁄2 21⁄4 MN369-0160 MN369-0161 7.75 3⁄4 1⁄2 23⁄4 MN369-0170 MN369-0171 11.32 7⁄8 1⁄2 23⁄4 MN369-0180 MN369-0181 17.61 1 1⁄2 23⁄4 MN369-0190 MN369-0191 18.87 11⁄2 3⁄4 27⁄8 MN369-0210 MN369-0211 49.94 2 3⁄4 33⁄4 MN369-0220 MN369-0221 89.08

Designed to perform a variety of jobs including chamfering, deburring and countersinking.• Single fl ute countersinks center better than

multi-fl ute tools• Can be used in hand-held applications and

nonrigid machine setups• HSS provides good wear resistance in mild

steels and nonferrous materials such as plastics, aluminum, copper, brass, bronze, rubber and wood

HSS Single Flute Countersinks82 & 90°

6 Flute Carbide Countersinks82 & 90° Countersink Angles

Series 78• Designed to perform a variety of jobs including chamfering,

deburring and countersinking• Provides the highest feed rates of all countersinks• Provides longer tool life as cutting load is distributed across more edges• Solid carbide head with steel shanks on 3⁄8" diameter and larger

Shank Included Angle Model # Reg. Sale Size Dia. OAL 82° 90° Price Price 1⁄8" 1⁄8" 11⁄2" MN317-0065 MN317-0075 $15.61 $8.99 3⁄16 3⁄16 11⁄2 MN317-0066 MN317-0076 19.52 10.99 1⁄4 1⁄4 2 MN317-0067 MN317-0077 23.58 12.99 3⁄8 1⁄4 2 MN317-0068 MN317-0078 45.82 25.99 1⁄2 3⁄8 21⁄8 MN317-0069 MN317-0079 63.51 35.99 3⁄4 1⁄2 23⁄4 MN317-0071 MN317-0081 117.94 67.99 1 1⁄2 23⁄4 MN317-0072 MN317-0082 191.44 110.99

As Low As

$899

HSS 118° & Cobalt Silver & Deming Drills1⁄2" Shank

• 6" OAL • Round shank • 3" fl ute length

HSS M-42 Cobalt List R56 Mfr’s Sale List R56CO Mfr’s Sale Size Model # List Price Model # List Price 33⁄64" MN317-9326 $48.20 $17.99 MN317-9382 $71.20 $26.99 17⁄32 MN317-9327 47.05 17.99 MN317-9383 68.60 26.99 9⁄16 MN317-9329 49.95 18.99 MN317-9385 68.60 26.99 37⁄64 MN317-9330 55.10 20.99 MN317-9386 80.20 30.99 19⁄32 MN317-9331 53.70 20.99 MN317-9387 77.10 29.99 5⁄8 MN317-9333 56.20 21.99 MN317-9389 77.10 29.99 21⁄32 MN317-9335 60.00 22.99 — 11⁄16 MN317-9337 62.30 24.99 MN317-9392 84.90 32.99 23⁄32 MN317-9339 63.10 24.99 MN317-9394 94.60 36.99 3⁄4 MN317-9341 68.80 26.99 MN317-9396 94.60 36.99 25⁄32 MN317-9343 73.40 28.99 MN317-9398 107.00 41.99 13⁄16 MN317-9345 77.10 28.99 MN317-9400 107.00 41.99 27⁄32 MN317-9347 79.90 29.99 MN317-9402 114.00 44.99 7⁄8 MN317-9349 82.80 32.99 MN317-9404 114.00 44.99 15⁄16 MN317-9353 92.40 36.99 MN317-9408 129.00 49.99 31⁄32 MN317-9355 97.70 38.99 MN317-9409 149.00 58.99 1 MN317-9357 109.00 42.99 MN317-9411 149.00 58.99

As Low As

$1799HSS TiN Tipped 118˚ Jobber Drills

• 118˚ radial special pointTiN TippedIncreases lubricity and heat resistance. Same benefi ts of TiN at a fraction of the cost

*Bright Finish

Flute Mfr’s Sale Size L OAL Model # List Price 1⁄16" 7⁄8" 17⁄8" MN327-3736* $2.63 $1.20 3⁄32 11⁄4 21⁄4 MN327-3738 2.63 1.27 7⁄64 11⁄2 25⁄8 MN327-3739 2.77 1.35 1⁄8 15⁄8 23⁄4 MN327-3740 2.77 1.35 9⁄64 13⁄4 27⁄8 MN327-3741 3.02 1.49 5⁄32 2 31⁄8 MN327-3742 3.07 1.51 11⁄64 21⁄8 31⁄4 MN327-3743 3.33 1.57 3⁄16 25⁄16 31⁄2 MN327-3744 3.73 1.80 13⁄64 27⁄16 35⁄8 MN327-3745 4.08 2.02 7⁄32 21⁄2 33⁄4 MN327-3746 4.54 2.23 15⁄64 25⁄8 37⁄8 MN327-3747 4.90 2.42 1⁄4 23⁄4 4 MN327-3748 5.22 2.59 17⁄64 27⁄8 41⁄8 MN327-3749 6.27 3.10 9⁄32 215⁄16 41⁄4 MN327-3750 6.46 3.22 19⁄64 31⁄16 43⁄8 MN327-3751 7.50 3.72 5⁄16 33⁄16 41⁄2 MN327-3752 8.25 4.12 11⁄32 37⁄16 43⁄4 MN327-3754 10.20 5.07 3⁄8 35⁄8 5 MN327-3756 11.75 5.91 13⁄32 37⁄8 51⁄4 MN327-3758 13.90 6.87 7⁄16 41⁄16 51⁄2 MN327-3760 16.10 7.94 15⁄32 45⁄16 53⁄4 MN327-3762 19.10 9.46 1⁄2 41⁄2 6 MN327-3764 20.05 10.06

SAVEUP TO

53%As Low As

$120






































































































Drills/Countersinks

SAVEUP TO

68%

Mfr’s Sale Set Brand Sizes Model # List Price 8 Pc. Triumph 9⁄16-1" x 16ths MN240-6548 $348.10 $109.95 8 Pc. Triumph ThunderBit® 9⁄16-1 x 16ths MN240-6946* 438.95 155.95 33 Pc. Triumph 1⁄2-1 x 64ths MN240-6549 1,370.42 425.95 33 Pc. Triumph ThunderBit® 1⁄2-1 x 64ths MN240-6550* 1,628.78 569.95 *With flatted shank

HSS Silver & Deming Drill Sets

• 1⁄2" shankStarting At

$10995

5 Pc. Cobalt Single Flute Countersink Sets60, 82 & 90°

• Designed to perform a variety of jobs including chamfering, deburring and countersinking

• Can be used in hand-held applications and non-rigid machine setups

• The large positive rake and single fl ute construction provide a smooth surface fi nish on a wide variety of material

• For use in high-tensile alloys, titanium, cast iron, Inconel and high-nickel stainless steels

Sets Include: 1⁄4, 3⁄8, 1⁄2, 3⁄4, 1"

Your Choice


60° Model # MN405-065482° Model # MN405-045390° Model # MN405-0452

SAVE52%

Flute Mfr’s Sale Size L OAL Model # List Price 1⁄16" 7⁄8" 17⁄8" MN240-6947 $1.83 $ .87 5⁄64 1 2 MN240-6948 1.83 .87 3⁄32 11⁄4 21⁄4 MN240-6949 1.96 .93 7⁄64 15⁄16 23⁄8 MN240-6950 1.96 .93 1⁄8 17⁄16 21⁄2 MN240-6951 2.23 1.06 9⁄64 19⁄16 25⁄8 MN240-6952 2.23 1.06 5⁄32 111⁄16 23⁄4 MN240-6953 2.45 1.17 11⁄64 113⁄16 27⁄8 MN240-6954 2.61 1.24 3⁄16 17⁄8 3 MN240-6955 2.97 1.41 13⁄64 115⁄16 31⁄8 MN240-6956 3.21 1.53 7⁄32 2 31⁄4 MN240-6957 3.53 1.68 15⁄64 21⁄16 33⁄8 MN240-6958 3.80 1.81 1⁄4 2 31⁄2 MN240-6959 4.07 1.94 17⁄64 21⁄8 35⁄8 MN240-6960 5.00 2.38 9⁄32 21⁄4 33⁄4 MN240-6961 5.62 2.68 19⁄64 23⁄8 37⁄8 MN240-6962 6.11 2.91 5⁄16 21⁄2 4 MN240-6963 6.27 2.99 21⁄64 29⁄16 41⁄16 MN240-6964 6.99 3.33 11⁄32 25⁄8 41⁄8 MN240-6965 7.85 3.74 23⁄64 211⁄16 43⁄16 MN240-6966 8.92 4.25 3⁄8 211⁄16 41⁄4 MN240-6967 9.16 4.36 25⁄64 23⁄4 45⁄16 MN240-6968 10.35 4.93 13⁄32 213⁄16 43⁄8 MN240-6969 10.63 5.06 27⁄64 27⁄8 47⁄16 MN240-6970 11.76 5.60 7⁄16 215⁄16 41⁄2 MN240-6971 12.65 6.02 29⁄64 3 45⁄8 MN240-6972 14.56 6.93 15⁄32 31⁄8 43⁄4 MN240-6973 14.73 7.01 31⁄64 31⁄4 47⁄8 MN240-6974 15.48 7.37 1⁄2 33⁄8 5 MN240-6975 15.73 7.49

Black Oxide• Three-fl at shank design on sizes

over 11⁄64" provides a positive grip in conventional power tools

Trinado™ HSS 135° Split Point Mechanic’s Length Drills

Starting At

87¢

SAVEUP TO

32%Carbide 118° Jobber Drills

Carbide provides superior wear resistance. Can withstand the highest cutting temperatures in a higher degree of dimensional accuracy.• 118° point for quick penetration• Used in low-tensile-strength materials such as

cast iron, cast aluminum, bronze, copper, zinc, brass, rubber and plastics

• Not recommended for use in steel

Flute Reg. Sale Size L OAL Model # Price Price 1⁄32" 5⁄16" 11⁄4" MN317-4351 $7.39 $5.19 1⁄16 3⁄4 11⁄2 MN317-4353 8.00 5.59 3⁄32 1 2 MN317-4355 9.38 6.49 1⁄8 11⁄4 21⁄4 MN317-4357 11.51 7.99 3⁄16 15⁄8 23⁄4 MN317-4361 16.88 11.79 1⁄4 2 31⁄4 MN317-4365 24.38 16.99 5⁄16 23⁄8 33⁄4 MN317-4369 35.30 23.99 3⁄8 23⁄4 41⁄4 MN317-4373 49.04 33.99 1⁄2 3 43⁄4 MN317-4381 88.43 61.99

SAVEUP TO

63%

Mfr’s Sale Size Model # List Price 17⁄32" MN240-6633 $32.00 $11.95 9⁄16 MN240-6635 33.51 12.95 19⁄32 MN240-6637 37.17 13.95 5⁄8 MN240-6639 36.99 14.95 21⁄32 MN240-6641 39.24 15.95 11⁄16 MN240-6643 40.93 15.95 23⁄32 MN240-6645 44.53 16.95 3⁄4 MN240-6647 44.46 17.95 25⁄32 MN240-6649 48.11 18.95 13⁄16 MN240-6651 49.98 19.95 27⁄32 MN240-6653 53.91 20.95 7⁄8 MN240-6655 53.57 21.95 15⁄16 MN240-6659 60.94 23.95 31⁄32 MN240-6661 67.54 24.95 1 MN240-6663 67.93 25.95

ThunderBit® HSS 118° Silver & Deming Drills• 1⁄2" shank • 6" overall length • 3" fl ute length• Surface treated• Split point and fl atted shank

As Low As

$1195

SAVE39%

Included Angle Model # 60° MN308-0131 82 MN308-0132 90 MN308-0133

7 Pc. Sets Include countersinks: 1⁄4, 5⁄16, 3⁄8, 1⁄2, 5⁄8, 3⁄4 and 1"Series 79• Provides good wear resistance in mild steels and

nonferrous materials such as plastics, aluminum, copper, brass, bronze, rubber and wood

• Provides the highest feed rates of all countersinks• Can be used on all types of machine setups

HSS 6 Flute Chatterless Countersink SetsCountersink Angles: 60, 82 & 90°

Your Choice


































































http://use-enco.com

http://use-enco.com

Easy, Secure Shopping


Taps

HSS Spiral Point Plug Style TapsUncoated & TiN Coated

• Recommended for through or blind holes which allow for chip accumulation in the bottom of the hole

• Designed for machine tapping in through holes in steel, steel alloys, iron, brass, aluminum, copper and plastic

• Ground thread

TiN Coated• Offers outstanding wear resistance, reduces friction and

prevents galling • Allows for increased tapped feeds to improve productivity

TiN Coated

As Low As

$395

No. of H Uncoated Low TiN Coated Low Size Flutes Limit Model # Price Model # Price 2-56 2 H2 MN337-4334 $7.59 MN337-4484 $9.65 4-40 2 H2 MN337-4345 4.95 MN337-4492 6.65 6-32 2 H2 MN337-4363 4.95 MN337-4498* 5.85 8-32 2 H3 MN337-4377 3.95 MN337-4502 5.95 10-24 2 H3 MN337-4390 3.95 MN337-4506 6.25 10-32 2 H3 MN337-4397 3.95 MN337-4509 6.25 1⁄4"-20 2 H3 MN337-4408 3.95 MN337-4513 6.45 1⁄4-28 2 H3 MN337-4417 3.95 MN337-4517 6.65 5⁄16-18 2 H3 MN337-4423 4.45 MN337-4520 7.34 5⁄16-24 2 H3 MN337-4432 4.45 MN337-4523 8.09 3⁄8-16 3 H3 MN337-4439 5.25 MN337-4526 9.69 3⁄8-24 3 H3 MN337-4445 5.65 MN337-4529 9.89 1⁄2-13 3 H3 MN337-4457 8.65 MN337-4537 14.59 1⁄2-20 3 H3 MN337-4461 10.85 MN337-4540 15.79*H3 thread limit

Grade: General Purpose Plug Chamfer: 3-5 ThreadsBottoming Chamfer: 1-2 Threads Ground Thread• Used in all types of hand and machine tool operations for ferrous and nonferrous materials• Ground thread for better surface fi nish and tighter tolerances • Bright fi nish• Thread Limit: Indicates amount above basic pitch diameter 0.0005" graduations

per H limit value• Plug style is best used for tapping through holes• Bottoming style allows threading closer to the bottom of a blind hole• 3 Pc. Sets include one each: Taper, plug, and bottoming style taps

HSS Hand Taps & Sets

3 Pc. SetAs Low As$708

Thread Thread Plug Low Thread Bottoming Low 3 Pc. Sets LowSize Limit OAL Model # Price L Model # Price Model # Price3 Flute #2-56 H2 13⁄4" MN311-0631 $4.01 7⁄16" MN311-0632 $3.90 MN319-6165 $15.21 #4-40 H2 17⁄8 MN311-0681 2.42 9⁄16 MN311-0682 2.53 MN326-1548 9.32 #6-32 H3 2 MN325-4783 2.00 11⁄16 MN325-4784 1.94 MN326-1549 7.084 Flute #8-32 H3 21⁄8 MN311-0741 2.08 3⁄4 MN311-0742 2.00 MN326-1550 7.37 #10-24 H3 23⁄8 MN311-0761 2.17 7⁄8 MN311-0762 2.00 MN326-1551 7.55 #10-32 H3 23⁄8 MN311-0771 2.11 23⁄8 MN311-0772 2.00 MN326-1552 7.55 #12-24 H3 23⁄8 — — MN319-6167 8.24 1⁄4"-20 H3 21⁄2 MN311-0001 2.05 1 MN311-0002 2.05 MN311-0004 8.14 1⁄4-28 H3 21⁄2 MN311-0011 2.17 1 MN311-0012 2.17 MN311-0014 8.14 5⁄16-18 H3 223⁄32 MN311-0021 2.89 11⁄8 MN311-0022 2.72 MN311-0024 10.04 5⁄16-24 H3 223⁄32 MN311-0031 2.89 11⁄8 MN311-0032 2.72 MN311-0034 10.04 3⁄8-16 H3 215⁄16 MN311-0041 3.26 11⁄4 MN311-0042 3.08 MN311-0044 11.35 3⁄8-24 H3 215⁄16 MN311-0051 3.26 11⁄4 MN311-0052 3.08 MN311-0054 11.35 7⁄16-14 H3 35⁄32 MN311-0061 6.34 17⁄16 MN311-0062 6.03 MN311-0064 19.28 7⁄16-20 H3 35⁄32 MN311-0071 6.34 17⁄16 MN311-0072 6.03 MN311-0074 19.28 1⁄2-13 H3 33⁄8 MN311-0081 5.90 121⁄32 MN311-0082 5.41 MN311-0084 20.48 1⁄2-20 H3 33⁄8 MN311-0091 6.34 121⁄32 MN311-0092 6.25 MN311-0094 22.94 5⁄8-18 H3 313⁄16 MN311-0131 13.18 113⁄16 MN311-0132 12.55 — 3⁄4-10 H3 41⁄4 MN311-0141 18.43 2 MN311-0142 17.56 — 3⁄4-16 H3 41⁄4 MN311-0151 18.43 2 MN311-0152 17.56 —

HSS Hand Tap Sets

Thread Thread Thread Low Size Type Limit Model # Price 4-40 NC H2 MN337-3945 $16.64 6-32 NC H3 MN337-3951 12.65 8-32 NC H3 MN337-3955 13.16 10-24 NC H3 MN337-3959 13.49 10-32 NF H3 MN337-3962 13.49 12-24 NC H3 MN337-3963 14.72 1⁄4"-20 NC H3 MN337-3967 14.54 1⁄4-28 NF H3 MN337-3971 14.54 5⁄16-18 NC H3 MN337-3975 17.93 5⁄16-24 NF H3 MN337-3979 17.93 3⁄8-16 NC H3 MN337-3982 20.25 3⁄8-24 NF H3 MN337-3985 20.25 1⁄2-13 NC H3 MN337-3990 36.58 1⁄2-20 NF H3 MN337-3991 40.96

• Ground threadIncludes: 1 each of taper (7-10 thread chamfer), plug (3-5 thread chamfer) and bottoming (1-2 thread chamfer) straight fl ute tap.

#6-5⁄8" Capacity Hand Tapper• Spindle balance allows for highly sensitive tap feel• Offset handle for speed and ease of operations• Spindle hardened and ground• Slide-lock vise jaw prevents tap breakageIncludes: Offset handle, hardened, precision fi tted spindle, and adapter rack.

Specifi cations Table Length: 121⁄2" Table Width: 61⁄2" Clearance Height: 77⁄8" Depth of Throat: 71⁄2" Approx. Weight: 50 lbs. Tap Adapters: 9 (#6-5⁄8")



SAVE50%



9 Pc. Replacement Adapter SetIncludes: #6, #8, #10, 1⁄4, 5⁄16, 3⁄8, 7⁄16, 1⁄2 and 5⁄8".

38-39 HD 15-08 Taps.indd 3838-39 HD 15-08 Taps.indd 38 7/15/15 8:20 AM7/15/15 8:20 AM






































































































Taps

HSS Surface Treated Fast Spiral Flute TapsPlug & Bottoming Styles SAVE

UP TO

61%Features:• Approximately 52° helix—increases chip lifting action • Draw chips out of a hole where chip disposal is a problem• Also used to span an interruption in a keyway, slot or gap in the tapped surface• Ground thread for better surface fi nish and tighter tolerances• Recommended for tapping blind holes in aluminum, magnesium,

brass, copper and die-cast metalsSurface Treatments:Oxide (Blue/Black)• Prevents galling and welding• Recommended for ferrous materials (iron based)ElektraLUBE®

• Reduces torque to prevent welding, loading and galling between the tap and the workpiece

• Recommended for use in stainless steels, steel forgings, tool and die steels, hot and cold rolledsteels, high-nickel alloys, beryllium, copper andsome aluminum alloys

Thread Limit: Indicates amount above basic pitchdiameter .0005" graduations per H limit value

Oxide Plug

ElektraLUBE® Plug

Oxide ElektraLUBE® Thread Thread No. of Plug Bottoming Mfr’s Sale Plug Bottoming Mfr’s Sale Size Limit Flutes OAL Model # Model # List Price Model # Model # List Price 4-40 H2 2 17⁄8" MN319-7035 MN319-7036 $24.84 $10.99 MN319-7058 MN319-7076 $29.02 $11.99 6-32 H3 2 2 MN319-7037 MN319-7045 20.18 7.99 MN319-7062 MN319-7080 23.44 8.99 8-32 H3 3 21⁄8 — MN319-7046 20.18 8.99 MN319-7063 MN319-7081 23.41 8.99 10-24 H3 3 23⁄8 — MN319-7047 20.18 8.99 MN319-7064 MN319-7082 23.53 9.99 10-32 H3 3 23⁄8 — MN319-7048 20.18 7.99 MN319-7065 MN319-7083 23.53 8.99 1⁄4"-20 H3 3 21⁄2 MN319-7039 MN319-7049 21.90 8.99 MN319-7066 MN319-7084 26.25 9.99 5⁄16-18 H3 3 223⁄32 MN319-7041 MN319-7051 26.94 11.99 MN319-7068 MN319-7086 31.38 12.99 3⁄8-16 H3 3 215⁄16 MN319-7042 MN319-7052 31.28 13.99 MN319-7069 MN319-7088 36.46 14.99 1⁄2-13 H3 3 33⁄8 MN319-7043 MN319-7053 55.12 24.99 MN319-7070 MN319-7091 63.73 26.99

Production Grade Plug Chamfer: 3-5 Threads, Bottoming Chamfer: 1-2 Threads

Starting At

$799

SAVE35%

Features:• Draw chips out of a hole where chip disposal is a problem • Also used to span an interruption in a keyway, slot or gap in the tapped surface • High helix increases chip lifting action• Ground thread for better surface fi nish and tighter tolerancesList 290• 45° helix • Designed for tapping hardened steel, such as 4140, 4340, H13, D2 and 1055 up to 35 HRC, as well as a variety of stainless steels

Surface Treatment: Oxide (Blue/Black)• Prevents galling and welding• Recommended for ferrous materials (iron based)

Thread Thread No. of Mfr’s Sale Size Limit Flutes OAL Model # List Price 2-56 H2 2 13⁄4" MN327-2121 $41.06 $25.99 4-40 H2 2 17⁄8 MN327-2123 27.11 17.49 4-40 H3 3 17⁄8 MN327-2124 27.11 17.49 6-32 H3 3 2 MN327-2128 22.01 13.99 8-32 H3 3 21⁄8 MN327-2132 22.01 13.99 10-24 H3 3 23⁄8 MN327-2135 22.01 13.99 10-32 H3 3 23⁄8 MN327-2138 22.01 13.99 1⁄4"-20 H3 3 21⁄2 MN327-2141 23.90 15.49 1⁄4-20 H5 3 21⁄2 MN327-2142 23.90 15.49 1⁄4-28 H3 3 21⁄2 MN327-2143 23.90 15.49 5⁄16-18 H3 3 223⁄32 MN327-2146 29.36 18.99 3⁄8-16 H3 3 215⁄16 MN327-2153 34.13 21.99 1⁄2-13 H3 3 33⁄8 MN327-2164 60.08 37.99 1⁄2-13 H5 3 33⁄8 MN327-2165 60.08 37.99 5⁄8-11 H3 4 313⁄16 MN327-2169 105.81 66.99

HSS Surface Treated Spiral Flute Taps – Modifi ed Bottoming Style

Grade: High Performance Material: 3% Vanadium

Chamfer: 2-3 ThreadsGround Thread

Tap & Die Round Sets39 Pc. HSS Machine Screw, Fractional & NPT Set• Size range: #4-40 to 1⁄2" • 1" die • Accessories: Adjustable die stock;

adjustable handle tap wrench; screw pitch gage; screwdriver; T-handle tap wrench

64 Pc. Carbon Steel Machine Screw, Fractional & NPT Set• Size range: #4-40 to 1" • 11⁄2, 2" dies • Accessories: 2 straight tap wrenches,

T-handle tap wrench, screw pitch gage, screwdriver and 1, 11⁄2, 2" die stocks


$112Sale Price

Model # MN891-2000


Micro Tap Guide

• Reversible tension pin for male and female hole centering of tap

• 1⁄2" diameter hardened shank, knurled for easy handling

• 3⁄16" diameter hardened tension pin

• 3" length • Tap size range: #10-1"

Shown with tension pin in both positions



wn with

SAVE17%

T-Handle Tap WrenchesPlain Type• Used in hand tapping • Can also be used with drills, reamers, etc.

Tap Size Low Range Model # Price 1⁄16-3⁄16" MN318-0010 $3.26 5⁄32-1⁄4 MN318-0015 3.92 1⁄4-1⁄2 MN318-0020 4.61

A must-have in

machine shops

38-39 HD 15-08 Taps.indd 3938-39 HD 15-08 Taps.indd 39 7/15/15 8:20 AM7/15/15 8:20 AM























































http://use-enco.com

http://use-enco.com

It’s IN STOCK and


Indexable

Carbide Turning Inserts

Grade IC907 (PVD Coated) Low to medium speed. Very high toughness for interrupted cut. Excellent notch wear and built-up edge resistance. For high temp. alloys, austenitic stainless steel, hard alloys and carbon steel.

Insert Reg. Sale Style/Size Model # Price Price CCMT 3-1-SM MN327-9669 $12.44 $9.95 CNMG 431-PP MN327-9780 11.94 9.55 CNMG 431-TF MN317-3366 15.36 12.28 CNMG 432-PP MN317-3367 15.36 12.28 CNMG 432-TF MN317-3365 15.36 12.28 CPGT 3-0-SM MN327-9665 20.35 16.28 DNMG 432-TF MN317-3333 20.80 16.64 TNMG 431-TF MN327-9638 13.52 10.99 VCMT 331-SM MN327-9808 20.00 16.00 WNMG 432-TF MN317-3423 15.59 12.47

10 Inserts Per Package

Starting At

$955Each

CNMGDNMG

sSAVE

UP TO

20%

5 Pc. Indexable Carbide Turning Toolholder Sets

Includes: • Style A, 1 left, 1 right,

Style B, 1 left, 1 right and 1 Style E holders and insert hold-down screw

• Uses T.T. style carbide inserts

Shank Insert Reg. Sale Size IC Model # Price Price 3⁄8" 1⁄4" MN250-1400 $33.11 $21.99 1⁄2 3⁄8 MN250-1401 36.22 29.99 5⁄8 3⁄8 MN250-1402 54.85 34.99 3⁄4 3⁄8 MN250-1404 78.66 38.99 1 1⁄2 MN250-1406 79.70 49.99

C5 Sale Price Ea. TiN Coated Sale Price Ea. Size IC Model # 1-9 10+ Model # 1-9 10+ 221 1⁄4" MN340-1000 $4.13 $3.10 MN340-1200 $4.59 $3.21 222 1⁄4 MN340-1006 3.99 2.79 MN340-1204 4.59 3.21 321 3⁄8 MN340-1010 4.29 3.00 MN340-1208 4.79 3.35 322 3⁄8 MN340-1014 4.29 3.00 MN340-1212 4.79 3.35 323 3⁄8 MN891-6962 4.29 3.00 MN891-6963 4.79 3.35 431 1⁄2 MN325-7217 4.99 3.49 MN325-7219 5.69 3.98 432 1⁄2 MN340-1016 4.99 3.49 MN340-1216 5.69 3.98 433 1⁄2 MN325-7221 4.99 3.49 MN325-7222 5.69 3.98

SAVEUP TO

50%

SAVE30%In Pkg. Qty.


CNMG

HC125T Grade• Great for alloyed steel,

cast steel & tool steel; hardened steel to 50 HRC

• Can be used in stainless steel applications

• High cutting-edge stability • Higher metal removal rates• Repeatable and reliable cutting performance • Medium to high cutting speeds • No disturbance of chipsChipBreaker: • AF/AM—For fi nishing • L5/HM—For medium machining • HMR—For roughing

TNMG

VNMG

Price Each Less Than Pkg. Description Model # Pkg. Qty. CCMT 21.51EN-AF MN414-2197 $8.35 $6.45 CCMT 21.51EN-AM MN414-2198 8.35 6.45 CCMT 32.51EN-AM MN414-2199 8.65 6.45 CCMT 32.52EN-AM MN414-2200 8.65 6.95 CNMG 431EN-L5 MN414-2201 10.16 7.95 CNMG 432EN-L5 MN414-2202 10.16 7.95 CNMG 432EN-HM MN414-2203 10.16 7.95 CNMG 432EN-HMR MN414-2204 10.16 7.95 CNMG 433EN-L5 MN414-2205 10.16 7.95 DCMT 32.51EN-AF MN414-2206 9.74 7.45 DCMT 32.51EN-AM MN414-2207 9.74 7.45 DCMT 32.52EN-AF MN414-2208 9.74 7.45 DCMT 32.52EN-AM MN414-2209 9.74 7.45 DNMG 331EN-L5 MN414-2210 10.84 8.45 DNMG 332EN-L5 MN411-2069 9.40 7.95 DNMG 432EN-L5 MN414-2212 13.14 10.45 SNMG 432EN-L5 MN414-2213 10.38 7.95 SNMG 432EN-HM MN414-2214 10.38 7.95 TCMT 32.51EN-AM MN414-2215 9.84 7.45 TCMT 32.52EN-AM MN414-2216 9.84 7.45 TNMG 331EN-L5 MN414-2217 9.08 6.95 TNMG 332EN-L5 MN414-2218 9.08 6.95 TNMG 332EN-HM MN414-2219 9.08 6.95 TNMG 432EN-HMR MN414-2220 12.68 9.95 VNMG 331EN-L5 MN414-2221 15.16 11.95 VNMG 332EN-L5 MN414-2222 15.16 11.95 WNMG 332EN-L5 MN414-2223 10.00 7.95 WNMG 432EN-L5 MN414-2224 11.34 8.95 WNMG 432EN-HM MN414-2225 11.34 8.95

Insert Grade Cross Reference Chart Hertel Sandvik Kennametal Iscar GC1525 KC9125 IC8250 HC125T GC2025 KCP25 IC9250 GC4225 KCM25 IC9025

Carbide Turning Inserts

hining

More Than90% of

All Turning Applications Are

Covered With This Grade

Starting At

$645

Blade Reg. Sale Size L OAL Model # Price Price T5 2" 45⁄16" MN505-0320 $5.39 $4.58 T6 2 45⁄16 MN505-0291 4.47 3.71 T7 2 45⁄16 MN505-0292 4.28 3.55 T8 23⁄8 411⁄16 MN505-0321 4.61 3.80 T9 23⁄8 55⁄16 MN505-0322 5.20 4.30 T10 33⁄16 61⁄8 MN505-0323 5.30 4.40 T15 33⁄16 65⁄16 MN505-0293 5.26 4.33 T20 4 71⁄2 MN891-5018 5.79 4.79 T25 4 81⁄8 MN891-5019 6.27 5.20 T27 41⁄2 81⁄2 MN891-5020 7.75 6.43 T30 41⁄2 81⁄2 MN891-5021 8.97 7.43 8 Pc. Set MN800-0708 50.00 40.00

Power Handle Torx® Drivers

8 Pc. Set Includes One Each: T6, T8, T10, T15, T20, T25, T27 and T30 sizes

Starting At

$355

Torx® is a registered trademark with Acument Intellectual Properties LLC.

* “A” kits include Grade HT25 inserts “B” kits include Grade HC335 PVD Coated inserts

All kits include1 insert wrench and

1 Allen wrench.

Cut-Off & Grooving KitsKits Include Blade, Block & 10 Inserts

Kits 2A & 2B include:• MGTBN 16-5 block (5⁄8")• MGIH 26-2 blade • 10 MGTN-2 inserts*

Kits 5A & 5B include:• MGTBN 25-6 block (1")• MGIH 32-3 blade • 10 MGTN-3 inserts*

Kits 3A & 3B include:• MGTBN 19-5 block (3⁄4")• MGIH 26-3 blade • 10 MGTN-3 inserts*

Grade Info.:HT25 (Uncoated) — General-purpose grade for moderate to severe cutting at medium speeds, increased feed, even under diffi cult conditions. Best suited for carbon and alloyed steels. HC335 (CVD TiC/TiCN/TiN Coated) — For interrupted cuts and heavy-to- moderate roughing of carbon and alloy steels. Block Insert Reg. Sale

Kit* Size Width Model # Price Price 2A 5⁄8" .087" MN422-2914 $193.90 $158.95 2B 5⁄8 .087 MN891-6964 221.63 178.95 3A 3⁄4 .120 MN422-2913 196.82 158.95 3B 3⁄4 .120 MN891-6965 224.76 178.95 5A 1 .120 MN308-0003 223.94 178.95 5B 1 .120 MN422-2912 224.58 178.95

As Low As

$15895

40-41 HD 15-08 Index.indd 4040-41 HD 15-08 Index.indd 40 7/15/15 8:21 AM7/15/15 8:21 AM















































































READY TO SHIP!


Indexable

SAVEUP TO

24% TPI TPI Grade GP3 Grade GP50 Reg. Sale Description Int. Ext. Radius Thick. Model # Model # Price Price FLT-2L 7-20 8-36 .005" .150" MN317-3676 MN317-3591 $13.91 $10.95 FLT-2R 7-20 8-36 .003 .150 MN317-3655 MN317-3582 13.91 10.95 FLT-3L 5-12 6-20 .008 .195 MN317-3656 MN317-3578 14.46 10.95 FLT-3R 5-12 6-20 .005 .195 MN317-3657 MN317-3587 14.46 10.95 FLT-4L 4-12 4-20 .008 .255 MN317-3658 MN317-3659 17.97 13.95 FLT-4R 4-12 4-20 .003 .255 MN317-3660 MN317-3661 17.97 13.95

• Ideal for grooving and profi ling applications

• With coolant holes

Internal Threading & Grooving Bars & Flo-Lock Inserts

Right-hand tools use left-hand inserts; left-hand tools use right-hand inserts.

Flo-Lock 60° Threading Inserts • GP3 Grade for combined hardness and toughness on

high-temperature alloys, stainless and nonferrous• GP50 Grade for steels

Min. Shank Corner Bore Right Hand Left Hand Reg. Sale Description Dia. OAL Rad. Dia. Insert Style Model # Model # Price Price A08-FLER/L2 .500" 8" .437" .730" FL-2L, FL-2R MN317-3557 MN317-3553 $94.19 $79.98 A10-FLER L2 .625 10 .500 1.000 FL-2L, FL-2R MN317-3558 — 110.76 95.98 A12-FLER/L2 .750 10 .562 1.125 FL-2L, FL-2R MN317-3551 MN317-3554* 134.57 116.98 A16-FLER/L3 1.000 12 .688 1.375 FL-3L, FL-3R MN317-3559 MN317-3555 175.98 152.98 A20-FLER/L3 1.250 14 .875 1.750 FL-3L, FL-3R MN317-3560 MN317-3556 187.37 159.98 A28-FLER L4 1.750 16 1.250 2.250 FL-4L, FL-4R MN317-3552 — 242.24 209.98* Min. bore dia.: 1.26"

If Shank Shank Purchased Sale Toolholder W Ht. OAL Insert Model # Separately Price MWLNR 10-3A 5⁄8" 5⁄8" 4" WNMG332 MN317-0801 $196.52 $139.00 MWLNR 12-3B 3⁄4 3⁄4 41⁄2 WNMG332 MN317-0802 205.28 143.00 MCLNR 12-4B 3⁄4 3⁄4 41⁄2 CNMG432 MN317-0799 223.08 165.00 MCLNR 16-4D 1 1 6 CNMG432 MN317-0798 227.45 165.00 MWLNR 12-4B 3⁄4 3⁄4 41⁄2 WNMG432 MN317-0803 236.28 165.00 MWLNR 16-4D 1 1 6 WNMG432 MN317-0804 240.65 159.00

Turning Toolholder Kit• Insert Grade TP200

for Semi-FinishingTP200 Grade Cross Reference ChartSeco TP200Iscar IC9025, IC8048, IC8025Kennametal KC9125, KC9215, KC9225Mitsubishi UC6010, UE6020, US7020RTW RC8015, RC8025Sandvik GC4025, GC4225, GC2015Sumitomo AC1000, AC2000, AC500GStellram NL30Valenite SV415, SV315, SV325Walter WAK20, WAK25

BONUSTOOLHOLDERW/ Purchase of

10 Inserts

SAVEUP TO

34%

As Low As

$139

Low Description Model # Price Socket Screw for Clamp MN505-6927 $ .51 Hold-Down Clamp MN505-6926 5.66

Replacement Parts

Cutting Shank No. of Reg. Sale Dia. Dia. Inserts Model # Price Price 3⁄4" 3⁄4" 1 MN422-3013 $57.96 $45.95 11⁄4 R8 2 MN422-3012 91.09 71.99 11⁄2 3⁄4 3 MN422-3010 111.79 88.49 11⁄2 1 3 MN422-3011 108.69 85.95 2 3⁄4 3 MN422-3008 151.13 120.95 2 1 3 MN422-3009 148.03 116.95 2 R8 3 MN422-3007 164.59 129.99 2 R8 3 MN422-3003* 226.71 178.59 21⁄2 R8 5 MN422-3006 252.59 199.99 3 11⁄4 5 MN422-3005 260.88 205.95 3 R8 5 MN422-3004 283.65 223.89* Extra-long OAL of 81⁄4" Inserts sold separately.

Tri-Dex Indexable End Mills

Positive Rake • 90° Cut • Uses 3⁄8" I.C.

triangular inserts (TPG/TPU)

• Cutter body length: 15⁄8"

Starting At

$4595

SAVEUP TO

21%


Grade Info.:IC328 PVD coated – Roughing at low speed, high feed and interrupted cuts on aluminum and steel alloys, austenitic stainless steel, carbon and cast steels and copper and exotic alloys; high resistance to shock.IC520M CVD coated – For fi nishing and medium machining, high speed and medium feed on steel, steel casting, malleable cast iron, HSS and martensitic stainless steel; high wear resistance.IC635 CVD coated – Low speed, high feed for unfavorable conditions on carbon, alloy and stainless steels.IC908 PVD TiAlN coated – Low to medium speed, high toughness for interrupted cuts on high-temp. alloys, austenitic stainless steel, hard alloys and carbon steel.IC928 PVD TiAlN coated – Suitable for milling stainless steel, high- temperature alloys and other alloy steels. Recommended for interrupted cut and heavy operations.IC950 PVD TiAlN coated – Used for heavy milling alloy steel and cast iron. Excellent wear resistance.

Carbide Milling Inserts

OEMT

SDMT

As Low As

$1195

Reg. Price Sale Price Each In Each In Style/Size Grade Model # Pkg. Qty. Pkg. Qty. ADKT 1505PDR-HM IC328 MN317-0778 $21.55 $16.95 ADKT 150532R-HM IC328 MN317-3732 21.55 16.95 ADKT 1505PDR-HM IC908 MN317-0779 22.06 16.95 ADKT 1505PDR-HM IC928 MN317-0783 21.29 16.95 ADKT 1505 PD-R-HM IC635 MN317-3822 19.99 15.95 ADKT 1505PDTR-76 IC328 MN317-3728 18.06 13.95 APKT 1003PDR-HM IC328 MN317-0784 18.95 14.95 APKT 100308PDTR-RM IC328 MN317-0789 18.95 14.95 APKT 100316PDTR-RM IC328 MN317-0790 19.52 14.95 APKT 1003PDR-HM IC520M MN317-0788 18.20 13.95 APKT 1003PDR-HM IC928 MN317-0786 18.95 14.95 APKT 1003PDR-HM IC635 MN317-3073 18.20 13.95 APKT 1003PDTR-76 IC328 MN317-0792 13.60 11.95 APKT 1003PDTR-RM IC328 MN317-0785 13.60 11.95 OEMT 060405AER-76 IC328 MN317-3749 18.27 13.95 SDMT 1205PDR-HQ-M IC908 MN317-3710 21.01 14.95 SOMT 060204-HQ IC328 MN317-3781 15.82 11.95 SPMT 100408TR-HQ-M IC328 MN317-3787 15.03 12.95

40-41 HD 15-08 Index.indd 4140-41 HD 15-08 Index.indd 41 7/15/15 8:21 AM7/15/15 8:21 AM




























































http://use-enco.com



Indicators

SAVE55%

Granite Surface Comparator StandWith Fine Adjustment

Premium Quality Stand• Base 2" thick x 6" square• .00005" fl atness • 71⁄4" high Dial Indicator• AGD 2 • 1.000" meas. range • 29⁄32" dial dia.• 0-100 dial read. • .001" grad.

Includes BONUS Dial Indicator!



Dial IndicatorsAGD Group 2

• Hard chrome-plated stem, precision ground and lapped • Vertical lug back • Interchangeable hardened chrome point• Hard satin-chrome fi nish • Revolution counter • 0-100 reading • 29⁄32" dial diameter

Measuring Dial Reg. Sale Range Graduation Color Model # Price Price .500" .0010" White MN605-4051 $12.13 $9.99 1.000 .0010 White/Yellow MN605-4070 13.62 9.99 1.000 .0010 Black MN605-4080 13.93 8.99 2.000 .0010 White/Yellow MN605-4205 36.21 21.99

As Low As

$899

SAVEUP TO

39%

SAVEUP TO

46%

MN890-9841 & MN307-3434• 2 Extra contact points 0.040"

and 0.120" included

Dial Test Indicators

Starting At

$5995 Meas. Dial Dial Dial Mfr’s Sale Range Grad. Dia. Reading Color Mfr’s # Model # List Price .030" 0.0005" 1" 0-15-0 Black 52-562-778 MN890-9841 $111.95 $59.95 .030 0.0005 1.5 0-15-0 Black 52-562-780 MN307-3434 117.05 62.95 .030 0.0010 1.0 0-15-0 White 52-562-774 MN319-3672 105.30 69.95

MN307-3434

• Dial read: 0-15-0• 0-.060" measuring range• Auto reversal• Jeweled movement

• Easy-to-read tilted dial• 210° swivel arc• 11⁄2" dial dia.• Tungsten carbide .080" point

Extended Range Test Indicators

Indicators include: two dovetail attachments and molded case

Your Choice

$9995 Dial Mfr’s Sale Grad. Dia. Mfr’s # Model # List Price .0005" 1.5" 52-562-001 MN890-9980 $117.55 $99.95 .0005 1.0 52-562-002 MN307-2909 117.55 99.95 .0010 1.0 52-562-003 MN307-2910 117.55 99.95

Series 543• After the initial zero-setting, the repeated absolute positioning is unnecessary• With the ABSOLUTE linear encoder, “Absolute Position” is displayed from the origin at power-on• Unlimited response speed • SPC data output • 2.0N or less force

Stem Mfr’s Low Resolution Accuracy Dia. Mfr’s # Model # List Price Lug Back .00005" .00012" 3⁄8" 543-792 MN414-0962 $273.00 $245.10 .0001 .0012 3⁄8 543-793 MN414-0966 273.00 237.50 .0005 .0008 3⁄8 543-783 MN414-0970 177.00 154.85 Flat Back .00005 .00012 3⁄8 543-792B MN414-0958 273.00 245.10 .0001 .0012 3⁄8 543-793B MN414-0965 273.00 237.50 .0005 .0008 3⁄8 543-783B MN414-0968 177.00 154.85 Indicators with Dust/Water Protection—2.5N or Less Force Lug Back .00005 .00012 3⁄8 543-796 MN414-0964 301.00 263.15 Flat Back .00005 .00012 3⁄8 543-796B MN414-0960 301.00 263.15

0-.5"/.01mm Digimatic Indicators

As Low As

$15485

Dial Mfr’s Sale Face Mfr’s # Model # List Price White 52-520-110 MN890-9824 $84.55 $25.99 Black 52-520-109 MN307-0718 69.40 25.99 Black 52-520-110-1 MN890-9952 82.50 42.99

Features:• 1.000" range • .001" graduation• Continuous reading 0-100• Revolution counter hand • Lug back mountMN890-9952 also includes:• Carbide contact point• Certifi cate of calibration• Solid brass housing

Dial IndicatorsAGD Group 2

Starting At

$2599

SAVEUP TO

69%

42-43 HD 15-08 ICM.indd 4242-43 HD 15-08 ICM.indd 42 7/15/15 8:22 AM7/15/15 8:22 AM





























Indicators

SAVEUP TO

41%

Deluxe Dial Indicators• Easy reading graduations • Thread size: 4-48; M2.5 x .45• Adjustable bezel for convenient zero setting with clamp screw• Lug back supplied unless noted • White dial (except where noted)• Accuracy meets or exceeds Federal specifi cations

*Flat back †Black dial

Meas. Dial Mfr’s Sale Range Dia. AGD Reading Grad. Model # List Price Inch .050" 2" 2 0-5-0 .0001" MN319-3676* $79.93 $56.95 .050 21⁄4 2 0-10 .0001 MN326-1170 79.93 52.95 .250 11⁄2 1 0-25-0 .0005 MN319-3679 46.61 32.95 .250 21⁄4 2 0-25-0 .0005 MN328-0956 51.06 29.95 .500 2 2 0-100 .001 MN326-1171 36.63 24.95 1.000 2 2 0-100 .001 MN326-1172† 38.86 25.95 1.000 2 2 0-100 .001 MN712-3660 38.86 25.95 2.000 21⁄4 2 0-100 .001 MN326-1173 75.48 52.95 2.000 21⁄4 2 0-100 .001 MN326-1174† 75.48 52.95 Metric 10.0mm 21⁄4 2 0-100 .01 MN319-3682 46.61 34.95 20.0 21⁄4 2 0-100 .01 MN319-3683 74.37 54.95

As Low As

$2495

Centering Indicator

• For centering a workpiece or fi xture within .0002" of true center

• 1.6" dia. indicator face remains stationary while the machine spindle rotates

• .005" graduation• Includes points,

feelers, restraining arm and fi tted plastic case



SAVEOVER

40%• White dial• 1" travel dial

indicator, .001" grad., lever-operated

• On-off magnetic base indicator holder with fi ne adjustment

Dial Indicator & Base Set



Jeweled Test Indicator Set

SAVE32%

• Automatic reversing • Precision pivot bearings at contact points• Meets federal specs for accuracy• Trigger response to lightest pressure• White dial• .030" range• .0005" grad. • 0-15-0 dial readingsIncludes: 5⁄32" and 3⁄8" diameter posts, dovetail clamp, .080" diameter point in fi tted case.



SAVEUP TO

29%

Horizontal “Quick-Set” Test Indicator SetsAnti-Magnetic

All sets include:• Test indicator with .078"

carbide contact point• 3⁄8" dovetail • Stem nut

Complete sets also include:• 5⁄32" dovetail • Square arm • Swivel clamp for stems• .039 and .118" contact points

Starting At

$95 Meas. Grad- Dial Basic Sets Mfr’s Sale Complete Sets Mfr’s Sale Range uation Reading Mfr’s # Model # List Price Mfr’s # Model # List Price .008" .0001" 0-4-0 513-403 MN606-4767 $169.00 $119.00 513-403T MN606-4752 $198.00 $145.00 .030 .0005 0-15-0 513-402 MN606-4750 130.00 95.00 513-402T MN606-4751 154.00 110.00 .030 .0005 0-15-0 513-412 MN606-4770 186.00 135.00 513-412T MN240-0102 215.00 155.00

SAVEUP TO32%

Magnetic Base with Indicator

Reg. Sale Description Model # Price Price Mag Base Only MN625-0440 $16.19 $10.95 Base Mag w/1" Import Dial Indicator MN505-1852 26.37 19.95

• A universal magnetic base that will save time and improve accuracy

• Strong magnet with 45 lbs. of holding power• Zinc die-cast housing• Six different locations for mounting accessories:

—3 positions 1⁄4"-20 for lug mounts —1 tapped hole 10-32—1 reamed hole 3⁄8" diameter—1 V-shaped hole in back: 1⁄8 to 5⁄16"

• Base: 41⁄2 x 1 x 11⁄4" • Dial indicators are .001" graduation,

AGD 2, 0-100 reading
























http://use-enco.com

http://use-enco.com



Calipers

• .100" revolution dial • .001" graduation• Made of hardened

stainless steel

12" Dial CaliperWith Bonus 6" Caliper



BUY A 12" CALIPER AND GET A

BONUS6" CALIPER

($34.00 VALUE)

SAVE28%

6" X-tra Value CalElectronic Caliper

• Absolute/incremental measurements• Stainless steel frame• Large, easy-to-read display• Resolution: .0005"/.01mm• Direct inch/metric conversion• 4-way measuring• Includes #357 coin battery and case• For replacement battery, order Enco

Model #712-0185


$3595Mfr’s List: $50.40

*Sliding surface is not TiN coated †115⁄16" Jaw length

As Low As

$7895 Range/ Dial Mfr’s Sale Rev. Color Mfr’s # Model # List Price 0-4" .200" White 505-716 MN307-3608 $95.25 $78.95 0-6" .200 White 505-717 MN307-3609 111.00 89.95 .100 White 505-675 MN307-3602 121.00 95.95 .100 Blue 505-675-51 MN307-3603 121.00 95.95 .100 Purple 505-675-52 MN307-3681 121.00 95.95 .100 Green 505-675-53 MN307-3682 121.00 95.95 .100 Red 505-675-54 MN307-3683 121.00 95.95 .100 Orange 505-675-55 MN307-3686 121.00 95.95 .100 Black 505-675-56 MN307-3688 121.00 95.95 0-8" .200 White 505-719 MN307-3610 165.00 134.95 .100 White 505-676 MN307-3605† 177.00 145.95 0-12" .100 White 505-677 MN307-3607* 281.00 185.95

Dial Calipers

• Extra-large dial face for ease of reading• Inside, outside, depth and step measurements• Hardened stainless throughout• Extra-rigid main beam (.132" thick)• Sliding surfaces of main beam are TiN coated

to decrease wear• .001" graduation• Jaw length: 19⁄16" (21⁄2" for 12")• Supplied in fi tted carrying case

SAVEUP TO

33%

• IP67 protection from coolants, dirt, and chips found in many manufacturing environments

• Certifi cate of inspection included• .0005"/.01mm resolution with ±.001" accuracy • Auto power on/off• For replacement battery, order Enco Model

#712-0185

Waterproof Digimatic Calipers

Meas. Mfr’s Sale Range Mfr’s # Model # List Price Without Output 0-6" 500-752-10 MN328-0873 $209.00 $155.00 0-12 500-754-10 MN327-9548 484.00 331.00With Output 0-6 500-762-10 MN326-1304 248.00 204.00 0-12 500-764-10 MN327-9549 537.00 408.00

As Low As

$155


$9295Mfr’s List: $116.00

6" Electronic Caliper

• Hardened stainless steel throughout for longer life and corrosion resistance

• Large switchable inch/metric .001"/.1mm LCD

• Floating zero allows quick comparison readings • OD, ID and depth rod measurements • Two-year average battery life • ±.005" (±.02mm) accuracy • Without SPC output; with depth barMfr’s # 700-113-10

Measuring Reg. Sale Range Model # Price Price 1.125-2.125" MN612-5814 $103.16 $69.95 2.875-3.875 MN240-0028 145.98 99.95

• Bezel rotates for zero setting

• Measures hard-to-get-at IDs

• Spring-loaded arms with .04" dia. measuring tips and quick-release button

• 31⁄4" approximate usable leg length

• For checking internal bores and recess dia.

• Rev. counter • .001" smallest grad.

Internal Dial Calipers

Starting At

$6995

SAVEUP TO

33%

























Calipers

Measuring Mfr’s Sale Range Accuracy Model # List Price 0-6" ±.001" MN328-1574 $92.90 $59.95 0-8 ±.001 MN328-1575 121.00 89.95 0-12 ±.0015 MN328-1576 176.49 89.95 0-40 ±.003 MN328-1578 1,020.08 539.95

Electronic CalipersWith SPC Output• Large LCD• No rack or pinions —

scale is embedded in epoxy• OD, ID, step and depth

measurements on 6, 8, and 12" models• Inch/metric conversion• 40" model is heavy-duty with

long jaws and fi ne adjustment• Resolution: .0005"• Certifi cate of calibration traceable to

NIST included • Includes fi tted case• For replacement battery, order Enco

Model #712-0185

rs

2 d l

SAVEUP TO

49%

As Low As

$5995


$6995Mfr’s List: $109.75

SAVE36%

• Direct inch/metric conversion • Absolute/incremental measurements • .0005" resolution • Stainless steel frame • Includes case • For replacement battery,

order Enco Model #712-0185


• Scale surface satin-chrome fi nished with clear, crisp graduations

• Main scale is hardened and ground• 4-way measurement and covered rack• Measuring faces are ground,

hardened and lapped• 360° adjustable bezel• .001" dial grads.• Carrying case

Dial Calipers

,

SAVEUP TO

47%

As Low As

$1995 Meas. Range Dial Reg. Sale Range Per Rev. Color Model # Price Price 0-6" .100" White MN610-5026 $34.51 $19.95 0-6 .100 Black MN610-5027 34.51 19.95 0-6 .200 White MN422-3410 39.11 22.95 0-8 .100 White MN610-5028 57.53 29.95 0-8 .100 Black MN610-5029 57.53 29.95 0-12 .100 White MN610-5032 78.25 42.95 0-12 .100 Black MN610-5033 78.25 42.95 0-12 .200 White MN422-3411 72.43 39.95

Toolmaker Universal Measuring SetIncludes:• 6" dial caliper, .001" graduation • 0-1" mic, .0001" graduation• 6" fl exible rule with 32nds, 64ths, 10ths and 100ths graduations• Complete with fi tted shop-hardened caseMfr’s # 52-095-007



SAVE64%

SAVE49%Water Resistant to IP54 Standards

Unique Full-Size Decimal Characters• Direct inch/metric/fraction conversion• Stainless steel frame• Resolution: .0005"/.01mm

(fractions in 1⁄64th increments)• Absolute incremental measurement • 4-way measuring • RS232 output • Includes molded plastic case• For replacement battery, order

Enco Model #712-0185

6" Euro Cal® IV Electronic CaliperReads in Inch, Metric & Fractions



SAVEUP TO

22% Dial Meas. Mfr’s Sale Color Range Model # List Price White 0-6" MN610-5124 $150.00 $105.95 Black 0-6 MN610-5024 150.00 105.95 White 0-8 MN610-6009 261.00 205.95 White 0-12 MN610-6013 312.00 245.95

Dial Calipers• Hard-coated alloy • .001" graduation • .100" range per revolution • Stainless steel jaws • Extremely smooth

movement • 4-way measurements:

Inside, outside, depth and step

• 8" and 12" calipers supplied in plastic case

As Low As

$10595

SAVE45%


• An economical electronic caliper for general use

• ±.001" accuracy • .0005" resolution• Without output • Thumb roll • Large LCD• For replacement

battery, order Enco Model #712-0185



6" Dial Caliper• Satin-chrome fi nish• Stainless steel construction• 4-way measurement• .100" per rev. • .001" grad.• 360° rotating bezel • .001" accuracy • Includes case


$2995Mfr’s List: $84.55























http://use-enco.com



Micrometers

Certifi cate of calibration traceable to NIST included.

IP54 Electronic Micrometers & Sets

• Large LCD • Automatic switch off• Resolution: .00005"/.001mm• Supplied in shop-hardened case• IP54 level protection: water,

oil, and fl uid resistant• Carbide measuring faces• Standards included

above 0-1" range

Measuring Mfr’s Sale Range Model # List Price 2-3" MN326-1156 $143.33 $119.95 3-4 MN326-1157 164.89 139.95 5-6 MN326-1159 201.53 168.95 Sets 0-3 MN326-1163 373.93 298.95 0-4 MN326-1162 542.78 438.95

Starting At

$11995

0-1" MDC Lite Digimatic Micrometers• Large LCD • Inch/metric conversion• Wide measuring range with hardened and ground anvils • Slimmer design and reduced weight for easier use• Auto power on/off for convenience• Provided with a certifi cate of inspection traceable to NIST• .001mm resolution • ±.00010" accuracy

Thimble Mfr’s Sale Style Mfr’s # Model # List Price Ratchet Stop 293-831-30 MN319-3769 $135.00 $119.00 Friction 293-832-30 MN319-3770 139.00 119.00

Micrometer with Ratchet Stop

Your Choice

$119

Meas. Base No. of Mfr’s Sale Range L Rods Model # List Price 0-6" 2.5" 6 MN328-1711 $130.13 $103.95 0-12 2.5 12 MN328-1712 280.33 229.95 0-12 4.0 12 MN328-1715 304.39 239.95

• .001" reading • Interchangeable rods with spherical ends• Ratchet stop • Positive locking clamp• Certifi cate of calibration traceable to NIST included

Depth Micrometers

As Low As

$10395

SAVEUP TO

43%

Digit MicrometersWith Insulated Frames

• .0001" resolution • Carbide measuring faces • Ratchet thimble; locking nut• Sizes over 1" supplied with standards

Meas. Mfr’s Sale Range Model # List Price 0-1" MN325-8100 $88.40 $49.99 1-2 MN325-8101 92.90 59.99

As Low As

$4999

Provides users with higher speeds, quality and stability.• Faster measurement of 2mm per revolution instead of the standard 0.5mm• A patented ratchet thimble mechanism helps ensure repeatability• A function lock helps prevent error • IP65 protection level • Certifi cate of inspection is provided • Signifi cant reduction in positioning time• .00005"/.001mm resolution

QuantuMike™ Coolant-proof Micrometers

Measuring Mfr’s Sale Range Mfr’s # Model # List Price 1-2"/25-50mm 293-186 MN892-0110 $258.00 $209.00 With SPC Output 0-1"/0-25mm 293-180 MN892-0107 262.00 219.00 1-2"/25-50mm 293-181 MN892-0108 300.00 249.00

Starting At

$209

• Friction thimble • Easy, snap-fi t rods• Large, easy-to-read LCD • .00005"/.001mm resolution• Direct RS232 output • Automatic switch-off• 4" base: hardened tool steel,

precision ground and microlapped

• Complete in case

6" IP54 ElectronicDepth MicrometerWater & Dust Resistant



0-1" Uni-Mike® Micrometer• Measures hard-to-reach locations • Grads.: .0001" • Friction thimble • Interchangeable fl at and rod anvils • Carbide-tipped spindle face


$169Mfr’s List: $208.00

ions

SAVE18%

Outside Micrometer Sets

As Low As

$3289

• Positive lock and carbide tipped with .0001" graduations• Ratchet thimble• Adjusting wrenches• Fitted case

Meas. No. of Reg. Sale Range Stds. Model # Price Price 0-3" 2 MN600-0003 $36.54 $32.89 0-6 5 MN600-0006 138.95 115.00

SAVEUP TO

17%

46-47 HD 15-08 ICM_Meas.indd 4646-47 HD 15-08 ICM_Meas.indd 46 7/15/15 8:25 AM7/15/15 8:25 AM




















Measuring ToolsService 800-USE-ENCO


SAVE46%

10 Pc. Angle Block Set

• 3" long x 1⁄4" thick• Angular accuracy:

.0003" per inch 30± arc seconds

• Precision-ground steel• 1° increments to 5°,

5° increments to 30°• Oil-hardened • Includes fi tted case



SAVE40%

6 Pc. Telescoping Hole Gage Set5⁄16-6" Measuring Range

• Constant spring tension for uniform contact pressure• Plunger on gage expands in hole to be measured, locks in place and gage is removed

from the hole. Final hole size is obtained by measuring over contacts with a micrometer • Satin-chrome fi nish • Rigid handle with self-centering feature • Contact points are hardened

tool steel and precision ground on the end measuring radius • Supplied in fi tted case



SAVE20%

Pocket-size gage has 22 precision surfaces for specifying and controlling surface fi nishes.

Surface Finish Comparator Gage



Includes lapped, ground, turned and milled specimens, ranging from 2 to 500 microinches. Made to ASA standard B46 2.1955. Dimensions: 5L x 2"W with pouch.

SAVE15%

Electronic Height Offset Gage

• High-sensitivity gage for height offset presetting

• Four highly visible LED lights • Precision ground; HRC 60 • .0002" TIR • Battery included • 1" dia. shank • .310" dia. probe



A simple solution to squaring your machine. Just zero indicators on fl at surface, install in milling machine spindle, bring the spindle down to the table and adjust the head until both indicators read the same.

• 1⁄2" shank • Fully assembled with indicators mounted and ready for use • No more tramming or split reading, compensating for loose, worn gears or mirrors

• Can also be used with a sine bar or protractor to set angle

• Heat-treated, ground steel for durability and accuracy

• Furnished in a fi tted case

Spindle Square™


$16595Mfr’s List: $198.57

SAVE16%

EZ-View® Flexible & Rigid Rules• Easy-to-view white graduations on black non-glare surface

Meas. Eng./Met. 3R 4R 5R 16R Mfr’s Sale Range Model # Model # Model # Model # Model # List Price Flexible 6" MN326-1078 MN326-1074 MN326-1075 MN326-1076 MN326-1077 $5.23 $3.49 12 MN326-1083 — MN326-1080 MN326-1081 — 8.66 5.49 18 MN326-1088 MN326-1084 MN326-1085 — — 18.50 11.95 24 MN326-1093 MN326-1089 MN326-1090 MN326-1091 MN326-1092 22.02 14.29 Rigid 6 — MN326-1055 MN326-1056 MN326-1057 MN326-1058 5.87 3.95 12 MN326-1064 MN326-1060 — MN326-1062 MN326-1063 9.73 6.95 18 — MN326-1065 — MN326-1067 MN326-1068 19.26 11.95 24 — MN326-1070 MN326-1071 — MN326-1073 22.77 14.95

SAVEUP TO

38%As Low As

$349

• Optical glass• Prismatic lenses• ABS high impact visor which fl ips

up when not needed• Adjustable leather comfort band

Loupe attachment

with 2.5x magnifi cation

Focusing Reg. Sale Magnifi cation Distance Model # Price Price 1.5x 20" MN632-5310 $40.58 $35.95 1.75x 14 MN632-5312 40.58 35.95 2x 10 MN632-5314 40.58 35.95 2.5x 8 MN632-5316 40.58 35.95 2.75x 6 MN632-5318 40.58 35.95 3.5x 4 MN632-5320 40.58 35.95

Your Choice

$3595Optivisors Magnifi ers



46-47 HD 15-08 ICM_Meas.indd 4746-47 HD 15-08 ICM_Meas.indd 47 7/15/15 8:25 AM7/15/15 8:25 AM











































http://use-enco.com

Measuring Tools



SAVE38%



6" Long PrecisionParallel Set

Set includes 1 pair of each height listed:8 Pairs 1⁄2" Thin • 7⁄8, 1, 11⁄8,

11⁄4, 13⁄8, 11⁄2, 15⁄8, 13⁄4"

• Hardened and ground

• For “zero” and start point fi nding for all three axes (x, y, z)• Made of high-quality steel hardened to RC60, precision

ground on all surfaces• Operates in vertical or horizontal position• Overtravel safety zone in all three axes: x, y—.100", z—.200"• Shank dia.: .750", +.0000"-.0002" • Probe dia.: -.200", ±.0001"• Repeatability: ±.0005" • Uses 4 EverReady A76 batteries (included)

3-Dimensional Sensor (x, y, z) - “Signal Lite”



SAVE45%

Depth SetterSets Z Depths Quickly & Accurately

• Lower cutting tool toward Tool Set –indicator will light up on contact

• Can be operated directly off table or from machine vise

• Aluminum contact face eliminates carbide chipping on cutting tools

• Repeatability: .0002"• Block dimensions: 1 x 2 x 3" • Batteries included


$4995Mfr’s List: $91.45

• Used for inch nut and bolt sizes

• Thread sizes are designated with a sticker on each gage

Includes: #6, #8, #10, 1⁄4 thru 1⁄2" gage; metric sizes include M4 thru M12.

Thread Detective Precise Nut & Bolt Thread Identifi er



er

SAVE34%

Machinist Calc™ ProAdvanced Machining Math and Reference ToolBuilt-in Drill Size and Thread Tables Save You Time and Steps.• Speeds and feeds • Bolthole pattern layouts• Trigonometric solutions • Right triangle math• 3-wire measurements • Fractional/metric conversionsMfr’s # 4087 Increase your shop’s productivity & profi tability

SAVEOVER

15% Sale PriceModel # MN891-8793


Head Shank Mfr’s Sale Dia. Dia. Style Model # List Price Single .20" 3⁄8" C MN240-0127 $14.50 $11.95 .20 1⁄2 D MN240-0128 15.00 11.95 .50 1⁄2 A MN601-1210 15.00 11.95 Double .20 3⁄8 E MN240-0129 19.00 14.95 .20 1⁄2 E MN240-0130 19.50 15.95 .2; .5 1⁄2 B MN601-1212 19.50 15.95 A EDB C

Edge Finders• Locate work surfaces easily, quickly and accurately• Work with fl at straight edges, shoulders, grooves, round

work, studs, dowels, or center points and scribed lines• Body and contacts are made of tool steel, hardened ground

and lapped to close tolerances for diameter and concentricity

SAVEUP TO

20%Starting At

$1195 Measuring Reg. Sale Range Model # Price Price 6" MN891-6098 $117.44 $59.95 8 MN891-6099 136.10 79.95 12 MN891-6100 153.66 89.95

Dial Height Gages• .001" graduations• Fine adjustment and lock• Shockproof • Stainless steel beam

Starting At

$5995

SAVEUP TO

49%

As Low As

$2995

Minus Tolerance Plus Tolerance Gage No. of +.0000-.0002" +.0002-.0000" Reg. Sale Range Pcs. Model # Model # Price Price .011-.060" 50 MN616-8121 MN616-8120 $50.48 $29.95 .061-.250 190 MN616-8126 MN616-8125 74.62 45.95 .251-.500 250 MN616-8131 MN616-8130 150.36 95.95 .501-.625 125 — MN616-8135 176.71 105.95 .626-.750 125 — MN890-9743 184.40 124.95 .751-.832 82 — MN890-9744 273.31 178.95 .833-.916 84 MN616-8151 MN890-9745 291.97 185.95 .917-1.000 84 MN616-8156 MN890-9746 341.37 209.95

Class ZZ Steel Pin Gage SetsMinus & Plus Tolerances

• 2" length • Members marked with size • Includes case

5

SAVEUP TO

40%

48-49 HD 15-08 Meas.indd 4848-49 HD 15-08 Meas.indd 48 7/15/15 8:27 AM7/15/15 8:27 AM




























Measuring ToolsOnline at use-enco.com


SAVEOVER

15%

45x Fine Centering ScopeWith Crosshair Reticle

• ±.0001" accuracy • 3" length • 3⁄8" shank dia. • 1⁄8" fi eld of view• 1" working distance

from end of lens mount• 60° eyepiece angle



Measuring Mfr’s Sale Range Model # List PriceWith Hook 0-6" MN326-1356 $186.48 $109.00 0-8 MN326-1357 216.45 139.00 0-12 MN326-1358 250.86 159.00 Without Hook 0-6 MN328-0938 177.61 99.00 0-8 MN328-0939 205.35 139.00 0-12 MN328-0940 238.66 159.00

Electronic Depth Gages

Certifi cate of calibration traceable to NIST included.• .0005"/.01mm resolution• Accuracy: ±.001"• Linear scale is embedded

in the stainless steel blade• Sliding LCD unit features push-button control

With Hook

Without Hook

As Low As

$99SAVE28%

12" Combination Square• 12" blade is chrome plated, fully

hardened and tempered, graduated in 8ths, 16ths, 32nds and 64ths

• Square head has level and scriber point• Double indexed protractor is graduated

180˚ in both directions• Case included



SAVE28%

Steel Protractors

• Used for setting bevels, transferring of angles and many other uses

• Permanently etched graduations from 0° to 180° in opposite directions

• 6" protractor arm • 33⁄8" wide by 2" high head• Supplied in plastic pouch

Reg. Sale Head Model # Price Price Half-Round MN240-0304 $9.77 $6.99 Rectangle MN635-6600 9.77 6.99

Half-Round Head

Rectangle Head

Your Choice

$699

SAVE10%

Screw Checkers

Quickly checks size, pitch or thread count, tap drill sizes, clearance drill sizes, tap sizes, length and basic diameter of American, Unifi ed and Metric machine screws.

Size Reg. Sale Description Range Model # Price Price Inch #1 to 5⁄16" MN990-0997 $16.11 $14.50 Metric 2 to 7mm MN990-0198 17.11 15.40 Metric 8 to 14mm MN990-0199 18.12 16.30

Starting At

$1450

• Polished optical glass• Includes plastic molded case

Folding Magnifi ers

Lens Reg. Sale Magnifi cation Dia. Model # Price Price 4x 1.42" MN414-2226 $22.95 $15.95 4x-9x 0.9 MN414-2227 34.95 22.95 5x-20x 0.8, 0.8, 0.6 MN414-2228 38.95 25.95

As Low As

$1595

Mfr’s Sale Meas. Range Accuracy Mfr’s # Model # List Price 0-8mm 0-200mm .001000 570-244 MN240-0078 $636.00 $569.95 0-12 0-300 .001500 570-312 MN308-0033 627.00 559.95 0-18 0-450 .002000 570-313 MN308-0034 880.00 769.00 0-24 0-600 .002000 570-314 MN308-0035 1,130.00 1,015.00 0-40 0-1,000 .003000 570-248 MN240-0082 3,790.00 3,410.00 Output Cable 40" SPC Cable MN611-4000 40.05 35.95

• Functions include: Zero-setting (ABS and INC modes), presetting (ABS and INC modes), data hold, counting direction changeover, inch/mm conversion, data output, error alarm, low battery alarm

• LCD, 6 digits and minus sign, .0005"/.001mm resolution• SR44 battery (included)• Provided with a data output port for connection with the SPC system

HDS Digimatic Height GagesSeries 570 with SPC Output

Mfr’s Sale Gage Compatability Mfr’s # Model # List Price Digimatic Height Gages (570-244) 570 Series 900173 MN327-2912 $57.85 $51.95 Digimatic Height Gages (570-312, 570-313, 570-314) 570 Series 900258 MN891-7378 59.65 52.95

Additional Scribes




















http://use-enco.com

http://use-enco.com







Measuring Tools Easy, Secure Shopping


SAVEOVER

30%

Thread Measuring Wire Set

Measure U.S. threads from 3 to 48 threads per inch and metric threads from .5mm to 6mm pitch.• Wires approximately 3" long • Sizes: .018 to .185"• Measure external threads by

3-wire method• Sizes stamped above each pocketIncludes: Laminated chart compiled from the U.S. standard handbook H28 and plastic case.

16 Sizes • 48 Wires • All 60° Threads


$2195Mfr’s List: $33.58

4 Pair Thin Parallel Set

Precision ground and hardened to 55-60 HRC. Two 1⁄4" holes are provided for mounting. Set workpieces to needed height in vise jaw in seconds. Allows drilling through work near edges without hitting parallels.• 5⁄32" thick; 31⁄2" long • 1⁄2, 5⁄8, 3⁄4 and 7⁄8" widths



Bench Block• V-groove across face

to accommodate round stock

• Hardened and ground with 8 holes 1⁄8 to 5⁄8"

• 3" diameter, 11⁄2" high



SAVEOVER

35%

Electronic Depth Gage• Stainless steel 1" x 0.06" measuring rod • Accuracy: ±0.001" • Resolution: 0.0005"• 0-1"/0-25mm meas. range • Includes Certifi cate of Calibration traceable to NIST• Designed for depth measurements or shoulders, small bores or inside grooves• Zero set at any point for comparison measurement• Base width: 23⁄8" • Large LCD


$4595Mfr's List: $63.59

SAVE25%

Jack Screw Set

• Great for setups and leveling work on planer beds and upright drills

• Lifts 1000 lbs. or more • Range: 21⁄4-33⁄8"


$1299 Regular Price: $17.52

Supplied in matched pairs• Precision ground and case

hardened on all 6 sides• Heat treated and

case hardened to HRC 55-60

Precision1-2-3 BlocksWith 23 Holes



SAVE46%

SAVEUP TO

29%

Magnetic BasesWith Top or Base Mounted Fine Adjustment

• Unique central locking mechanism with spring-loaded bearing • On/off magnet • Models with adjustment on top have universal swivel clamp that holds 3⁄8",

8mm, 6mm dovetail • Models with adjustment on base hold 3⁄8" stem and dovetail

Bottom Top Magnetic Reg. Sale Arm L Arm L Pull Lbs. Model # Price Price Fine Adjustment on Top 4.33" 3.98" 175 MN326-1361* $104.76 $82.95 2.20 2.00 70 MN326-1369 83.80 62.95 5.26 5.24 175 MN326-1366 132.08 105.95 Fine Adjustment on Base 2.20 2.00 63 MN891-5391 101.10 75.95 4.33 3.98 65 MN326-1359 114.77 89.95 5.26 5.24 175 MN326-1364 141.19 99.95*Permanent magnetic

Starting At

$6295

Base Magnetic Rod Mfr’s Sale L Pull Lbs. L Model # List Price 2.36" 176 7.09" MN414-0858 $30.30 $24.95 2.36 176 7.99 MN414-0859 34.64 26.95 2.87 220 9.84 MN414-0860 39.01 29.95 4.61 220 13.78 MN414-0861 61.52 47.95

Forced Locking Magnetic Bases• Test indicator dovetail clamping mechanism• Dial gauge held by the 3⁄8" or 8mm diameter stem or by the lug back• Rotary on/off• 2W x 2.16"H base• Includes holder


















Measuring ToolsOnline at use-enco.com


• 1⁄32" width• Made from high-grade alloy steel,

hardened and ground• Height specifi cations relate to

consistency within each pair. Absolute heights are nominal

• Includes case• 1⁄2-15⁄8 in 1⁄8" increments

6" Long 10 Pair Parallel Set


$125Mfr’s List: $134.50

Accuracy Parallelism: ±.0001" Paired in height: ±.0001" HRC: 50

SAVE43%

4 Pc. Small Hole Gage Set

Flat Bottom Measuring Range 1⁄8" to 1⁄2"• Measures inside diameters or

widths of small shallow holes or slots

• Half-ball construction permits use not accessible with full-ball style into slot or hole

• Simply insert, lock in place, remove and take micrometer measurement

• Vinyl case



SAVEUP TO

30%Digital Protractor & Levels

• Instant LCD of level, tilt, true vertical or any angle in between

• Meas. range: 360° (90° x 4) • Battery included

Mfr’s Sale Description Res. Acc. Model # List Price Protractor ±.1° .1° MN317-0585* $170.17 $118.95 Pro 360 Level ±.1° .1° MN240-0341 239.32 178.00 Pro 3600 w/SPD Level ±.01 .05 MN240-0343 372.38 308.95*No air shipment

Quality Dial Bore Gage SetWith Dial Indicator

Dial Bore Gage Set with AGD Series 2 Dial Indicator• 6.4 - 10" measuring range • 16" gaging depth • 6 anvils

.001" GraduationModel # MN325-1305


81 Pc. Rectangular Gage Block Sets• Grade 2 & 3 sets include a Certifi cate of Accuracy

traceable to the National Bureau of Standards• Grade AS-2 accuracy: ±.000050"81 Pc. Set • Includes 1 Block .050",

10 Blocks .1000-.1009" in .0001" steps, 49 Blocks .101-.149" in .001" steps, 17 Blocks .150-.950" in .050" steps,4 Blocks 1, 2, 3, 4" in 1.000" steps

• Supplied in a wooden case

g

SAVEUP TO

38%Starting At

$10995 Wt. Grade Economy Reg. Sale Wt. Grade 0 Reg. Sale Lbs. Model # Price Price Lbs. Model # Price Price 7.1 MN630-4115 $177.81 $109.95 6.9 MN630-4124 $451.15 $309.95

• Five different gaging surfaces ideal for checking convex and concave radii

• 1⁄64-1⁄2" measuring range • 1⁄64-17⁄64" x 64ths & 9⁄32-1⁄2" x

32nds graduations• 4" holder with

adjustable nut• Each gage has

radius marked on it • Chrome fi nish

25 Pc. Radius Gage Set



SAVEOVER

50%

SAVE34%

6" Long Precision Parallel Set10 Pairs 1⁄8" Thin

• Hardened and ground Includes 1 pair of each height listed: 1⁄2, 5⁄8, 3⁄4, 7⁄8, 1, 11⁄8, 11⁄4, 13⁄8, 11⁄2, 15⁄8"



81 Pc. Rectangular Gage Block SetCertifi cate of calibration traceable to NIST included.• Size range:

.050 to 4.00" • Shop accuracy

approx. ±.000050"• Includes case • Economy grade


$16595Mfr’s List: $272.94













http://use-enco.com

http://use-enco.com

Fluids It’s IN STOCK and


Price Each Case Less Than Case Description Size Qty. Model # Case Qty. TRIM® E206 1 gal. Jug 4 MN319-3910 $28.49 $25.00 TRIM® E206 5 gal. Pail 1 MN319-3911 — 141.00 TRIM® SOL 1 gal. Jug 4 MN319-3899 26.95 23.95 TRIM® SOL 5 gal. Pail 1 MN319-3900 — 141.00

TRIM® Metalworking Fluids

E206 Soluble Oil• Designed as a general-purpose, multi-metal

coolant for general machining of ferrous and nonferrous metals

• EP additive controls built-up edge• Fine-emulsion particle size reduces carry-off

and facilitates getting fl uid to point of cut• Leaves a fl uid, oily, non-gumming fi lm SOL® Heavy-Duty Soluble Oil• Excellent for the machining of aluminum

and aluminum alloys• Leaves a fl uid residue that will not

varnish up• Wide applications range from 3 to 25%

As Low As

$2395Ea. In Case Qty.

SAVEUP TO

40%

Reg. Sale Description Size Model # Price Price No. 1 5 gal. MN893-2096 $140.89 $84.00 No. 2 1 gal. MN505-1987 26.02 18.00 5 MN505-1988 105.80 85.00 No. 3 5 gal. MN328-1135 105.61 93.00 No. 4 1 gal. MN505-1989 26.02 18.00 5 MN505-1990 107.77 85.00

For all combinations of cast iron, steel and nonmetallic way materials on small-to-medium machine tools; fl ood application in large machines.• Additives eliminate stick-slip and chatter

under thin-fi lm lubrication conditions; allows smooth, uniform motion even at low table speeds

• Contains no Class 1 ozone-depleting chemicals

Vactra® No. 1, 2, 3 & 4 Way Oil

As Low As

$18

SAVE20%Delivers extended sump life versus previous generation semisynthetics.

• Dramatically extends useful life without the need for tank-side biocides or fungicides

• Compatible with a very wide range of material, including cast iron, steels, copper, titanium and aluminum alloys, and many plastics and composites

• Optimized combination of cooling and lubricity for titanium machining applications

• Provides superior corrosion inhibition on cast iron and eliminates “hot chip” and clinkering problems

• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys

• Contains no nitrites, triazines, phenols, chlorinated or sulfurized EP additives

Reg. Sale Size Model # Price Price 1 gal. MN404-3030 $33.92 $26.95 5 MN404-3031 174.23 141.00

TRIM® MicroSol® 585XTExtended-Life, Nonchlorinated Semisynthetic

Performs ExtremelyWell On All

Metals!

Cutting & Tapping Fluid

• For use on all metals, including aluminum, stainless steel, Inconel and titanium

• May be used straight or as an additive to enhance inexpensive cutting oils

Contains no 1,1,1-Trichloroethane, methylene chloride, sulfur or chlorine — Safe for the ozone layer

Price Each Case Less Than Case Size Qty. Model # Case Qty. 4 oz. Spout Top 24 MN319-3896 $2.64 $1.99 16 oz. Aerosol 12 MN319-3897* 14.04 9.99 1 pt. Can 12 MN891-4158 9.13 6.49 1 gal. Can 2 MN505-1978 54.65 38.98 5 gal. Pail 1 MN505-2032 159.00*No air shipment

Oak Signature Reg. Sale Model No. Model # Price Price DSY 4100 MN893-1987 $85.30 $79.39 DSS 700 MN893-1986 105.94 98.69 DSS 800 MN893-1985 126.46 117.79 DSS T-TECH MN893-1984 117.84 109.75

Metalworking Fluids5 Gallon Pails

OAKWASH® DSC AL • Recommended for cleaning individual machine and

central system reservoirs, metalworking fl uid lines, premix tanks, machines and parts

• Improves rancidity control• Removes insoluble soaps from dirty central systems

in hard water areas. Does not redeposit soil• Can also be used at 4% to 5% for aluminum quenching• Thoroughly removes chip deposits and tramp oil• Protect machines and parts, both ferrous and nonferrous, from rusting during cleaning

Recommended starting dilution of 5% for all.DSS 700 & DSS 800— Semi-Synthetic• Ideal for general-purpose machining and grinding • Suited for ferrous and most nonferrous materialsDSS 700 Cutting/Grinding Fluid• For light- to moderate-duty applications, such as

milling, turning, drilling and surface grindingDSS Cutting/Grinding Fluid• Designed for moderate- to heavy-duty applications,

such as deep hole drilling, boring, reaming, tapping, internal and/or grinding

DSS T-TECH—Synthetic• Duty range: moderate- to heavy-duty operations• Recommended for machining and grinding

aluminum, iron and steel • Excellent lubricity, rancidity and mold control DSY 4100—Synthetic• Ideal for roll and surface grinding• For light- to moderate-duty operations• Exceptionally good bacteria, mold, foam, and rust control • Best suited for cast iron, nodular iron, and carbon steels

Starting At

$7939



52-53 HD 15-08 Fluids.indd 5252-53 HD 15-08 Fluids.indd 52 7/15/15 8:30 AM7/15/15 8:30 AM























FluidsREADY TO SHIP!


DTE® Series Circulating Oils

• High-quality rust and oxidation inhibiting oils for multifunctional use• Good high-temperature stability

For bearings, gears, hydraulics, selected vacuum pumps & air compressors!

Reg. Sale Description ISO VG Model # Price Price 1 Gallon Size DTE Heavy 100 (SAE 30) MN505-1219 $30.80 $22.99 DTE Heavy/Med. 68 (SAE 20) MN325-5922 29.27 22.99 DTE Extra Heavy 150 (SAE 40) MN319-2765 30.54 22.99 5 Gallon Size DTE Light 32 (SAE 10) MN505-1218 130.82 99.99 DTE Heavy 100 (SAE 30) MN319-2764 119.94 99.99 DTE Extra Heavy 150 (SAE 40) MN319-2766 119.94 99.99 DTE BB Extra Heavy 220 (SAE 50) MN319-2763 137.11 99.99

Starting At

$2299

• Contains No Class 1 Ozone-Depleting Chemicals• Good antifoam characteristicsNo. 6 Light• Highly refi ned, light grade (ISO VG 10) transparent, mineral oil lubricant with

balanced additives• For high-speed spindle bearings in machine tools requiring low-viscosity oils• Good wear protection • Long service life • Good rust protection• Viscosity (cST @ 40°C): 10 @ 40°C; 2.62 @ 100°C• Approved against Cincinnati Milacron P-62No. 10 Medium• Premium quality, medium grade, (ISO VG 22)

lubricant formulated from stable, low-viscosity base stocks and a balanced additive

• For high-speed spindle bearings in precision grinders• Minimizes wear under high load conditions• Resists oxidation and deposit formation• Viscosity (cST @ 40°C): 22 @ 40°C; 4 @ 100°C• Approved against Cincinnati Milacron P-45

Velocite® Spindle Oil Lubricants

Reg. Sale Size Model # Price Price No. 6 1 gal. MN505-2000 $23.98 $19.95 5 MN505-2001 102.25 85.95 No. 10 1 MN505-2002 23.98 19.95 5 MN505-2003 102.25 85.95

DTE® 20 Stabilized Hydraulic Fluids Low Description Model # Price 1 Gallon DTE24-ISO32 (SAE10) MN505-1206 $29.46 DTE25-ISO46 (SAE20) MN505-1208 28.87 DTE26-ISO68 (SAE20) MN505-1210 26.44 5 Gallon DTE24-ISO32 (SAE10) MN505-1207 84.95 DTE25-ISO46 (SAE20) MN505-1209 84.95 DTE26-ISO68 (SAE20) MN505-1211 84.95

• Longer hydraulic pump life due to excellent wear-protection• Extended oil drain intervals due to super stabilized additive package• Multimetal compatibility under both wet and dry conditions• Excellent protection against rust• Approved in the Dension HFO, Vickers V-104C and 35VQ25, and Sundstrand pump test• Qualifi ed against Cincinnati Milacron specifi cations P-68, P-70, and P-69, respectively• For most hydraulic applications in industrial, marine and mobile service including high

pressure systems, all industrial robotics, machine tools and pumps



Compatiblewith CNC

machiningWS-500A Heavy-Duty Chlorine-Free Water Soluble Oil5 Gallon Pail• Contains no Class 1 ozone-depleting chemicals • Excellent for machining titanium, Inconel X, aluminum, stainless steel and rene 41• Contains no active chlorine or sulfur• Use for turning, sawing, milling, drilling, CNC tapping and some grinding• SCAQMD Certifi ed for low VOCs • Long sump life

Oneformula

doesit all!

Reg. Sale Size Model # Price Price 4 oz. Spout Top Bottle MN891-4159 $3.77 $2.99 16 oz. Spout Top Bottle MN825-8511 10.33 7.99 1 gal. Jug MN825-8512 58.85 45.00

Cutting & Tapping Fluid

• Works on any metal • Odorless• Exceptionally effective on

exotic alloys, titanium, stainless steel and aluminum

• Extends tool life • Provides a precision fi nish and

closer tolerances • Controls chip welding • Contains no 1,1,1

trichloroethane, sulphur or carbon tetrachloride

• Meets OSHA requirements and is USDA chemically acceptable

Contains No Class 1 Ozone-Depleting Chemicals

Cutting Oil• Contains no class 1 ozone-depleting chemicals• For all ferrous and nonferrous

machining operations• Excellent lubricant and coolant

that extends tool life• Spray clings to work area• 16 oz. aerosol can, net fi ll 12 oz.

Model # MN505-2006Regular Price Each 1-11: $5.35Sale Price Each Qty. 12+: $4.79

52-53 HD 15-08 Fluids.indd 5352-53 HD 15-08 Fluids.indd 53 7/15/15 8:30 AM7/15/15 8:30 AM























http://use-enco.com

Fluids Over 90,000 PRODUCTS Available


Water-Soluble Prime-CutCutting & Grinding Oil• 5 gal. pail• Contains chlorinated extreme-pressure additive

capable of lubricating a complete range of machining and grinding operations

• Extremely effective when used on aluminum• May be used with all metals, except magnesium• Use up to 1 part Prime-Cut to 33 parts water• Contains no Class 1

ozone-depleting chemicals



Tapfree Excel Cutting & Tapping Fluid

Heavy-duty, Low-Odor Lubricant for Hard Metals• Safe for all metals• Exceptionally good on

hard-to-cut metals such as stainless steel, titanium, and exotic alloys

• Produces tighter tolerances, longer tool life, and a better surface fi nish on all metals

• Clings to the cutting tool for better hold on horizontal operations and less product usage

Reg. Sale Size Model # Price Price 8 oz. bottle MN404-3029 $6.26 $4.49 16 oz. bottle MN404-3028 10.10 7.29

Cutting & Grinding Fluid ConcentrateContains No Class 1 Ozone - Depleting ChemicalsHeavy-duty biostable water soluble cutting and grinding fl uid concentrate• For most machining

operations on all metals including aluminum (except magnesium)

• Free from chlorine, sulfur and silicone

• Dilute as needed between 10-33 parts water


Contains No Class 1 Ozone-Depleting Chemicals• The most effective cutting

fl uid available• Excels in tough materials • Effective on all metals

(including aluminum)

New Rapid Tap Cutting Fluid

Reg. Sale Size Model # Price Price 4 oz. MN505-2025 $3.16 $2.69 1 pint MN505-2026 9.69 7.99 1 gal. MN505-2027 55.80 43.99 5 gal. MN505-2028 262.86 205.00

As Low As

$269EP-XTRA™ Cutting Fluid

Contains No Class 1 Ozone-Depleting ChemicalsTap Magic Contains No 1,1,1-TrichloroethaneUse on all metals, including stainless, aluminum and titanium.

Improvestool life!

Price Each Case Less Case Size Qty. Model # Than Case Qty. 4 oz. Spout Top 24 MN505-2011 $ 2.90 $ 2.35 12 oz. Aerosol Can 12 MN405-0566* 15.18 9.95 1 pint Spout Top 12 MN505-2013 9.77 7.99 1 gal. Can 2 MN505-2014 58.85 49.95 5 gal. Pail 1 MN505-2012 — 229.00*No air shipment

As Low As

$235

• Accurately measures coolant concentration• Optimizes coolant use and tool life• Includes instructions and case• Use MN505-2111 for general purpose

applications, MN505-2112 for low concentrations and synthetics

• MN505-2112 features auto-temperature compensation

Coolant Testers/Refractometers

Solution Meas. Reg. Sale Range Grad. Model # Price Price 0 - 32% 0.2% MN505-2111 $132.73 $69.95 0 - 10 0.1 MN505-2112 136.59 79.95

SAVEUP TO

47%

Moly-Dee CF Tapping FluidEspecially effective on “diffi cult-to-machine” metals such as stainless steel and aerospace alloys. • Works on most metals including aluminum

and titanium • Maintains stability to 750˚F• The molybdenum disulfi de (MoS2) withstands pressures

up to 400,000 psi–beyond the yield point of any known metal, reducing metal-to-metal contact and results in longer tool life

Does not contain 1,1,1-trichloroethane, perchlorethane or chlorine.

Note: Moly-Dee will stain copper or copper alloys if not removed following use.

Reg. Sale Description Model # Price Price 16 oz. Spout Top MN404-3059 $43.86 $24.95 1 gal. Jug MN404-3060 178.95 104.95

etal,

Nontoxic –Contains No

Class 1 Ozone-DepletingChemicals

SAVEOVER

40%


WS-5050 Heavy-Duty Soluble Oil Multi-purpose coolant for all machining operations and metals except titanium.• Suitable for CNC machining • Excellent on aluminum • Non-staining• Not for use on carbide

Sale Price5 Gallons

$12299

54-55 HD 15-08 Fluids_AB.indd 5454-55 HD 15-08 Fluids_AB.indd 54 7/15/15 8:31 AM7/15/15 8:31 AM
























Online at use-enco.com Abrasives


Hand Wire Brushes

Curved HandleScratch Brush

Small Cleaning Scratch Brush

The blocks of all Osborn scratch brushes are kiln-dried hardwood for maximum tuft retention even in severe applications. The smooth machined fi nish provides excellent comfort and a hang-up hole is provided for the most widely used styles. Densely fi lled for longer wear and more effi cient material removal.

Shoe Handle Scratch Brush

Brush No. of Brush Price Each Material Rows L OAL Model # 1-5 6+Emro® Economy Shoe Handle Scratch Brush Stainless Steel 4 x 16 51⁄4" 10" MN619-0747 $4.14 $3.06Curved Handle Scratch Brush Carbon Steel 4 x 19 6 1311⁄16 MN619-0725 3.29 2.43 Stainless Steel 3 x 19 6 1311⁄16 MN619-0726 4.72 3.49Small Cleaning Scratch Brush Stainless Steel 3 x 7 17⁄16 73⁄4 MN619-0731 3.61 2.67

SAVE25%

Qty.: 6+

Pkg. Low Grit Qty. Model # Price1 x 30" 60 50 MN337-0404 $1.33 80 50 MN337-0405 1.33 100 50 MN337-0406 1.25 120 50 MN337-0407 1.25 180 50 MN337-0408 1.24 240 50 MN385-7240 1.24 320 50 MN385-7320 1.241 x 42" 36 50 MN337-0409 1.43 40 50 MN337-0410 1.43 50 50 MN337-0411 1.43 60 50 MN337-0412 .94 80 50 MN337-0413 .94 100 50 MN337-0414 .94 120 50 MN337-0415 .94 150 50 MN337-0416 1.17 180 50 MN337-0417 1.17 220 50 MN337-0418 1.17 240 50 MN337-0419 1.17 320 50 MN337-0420 1.172 x 48" 40 20 MN337-0438 2.16 50 20 MN337-0439 2.16 60 20 MN337-0440 1.86 80 20 MN337-0441 1.68 100 20 MN337-0442 1.59 120 20 MN337-0443 1.59 150 20 MN337-0444 1.59 180 20 MN337-0445 1.594 x 36" 60 20 MN337-0539 3.09 80 20 MN337-0540 3.02 100 20 MN337-0541 2.76 120 20 MN337-0542 2.76 150 20 MN337-0543 2.76 180 20 MN337-0544 2.766 x 48" 36 10 MN337-0568 6.99 40 10 MN337-0569 6.51 50 10 MN337-0570 6.38 60 10 MN337-0571 5.51 80 10 MN337-0572 5.00 100 10 MN337-0573 4.80 120 10 MN337-0574 4.80

Aluminum Oxide Sanding Belts

• Resin-bonded sanding belts have X-weighted backing with break-resistant joints

• Use for grinding, deburring and blending ferrous and nonferrous metals

As Low As

94¢

Sale Price Each Pkg. Less Than Pkg. D Grade Color Qty. Model # Pkg. Qty. Qty. 2" Coarse Brown 50 MN505-6242 $1.21 $ .91 2 Medium Maroon 50 MN505-6245 1.21 .91 2 Very Fine Blue 50 MN505-6248 1.21 .91 2 Super Fine Gray 50 MN505-6251 1.21 .91 3 Coarse Brown 25 MN505-6243 2.32 1.74 3 Medium Maroon 25 MN505-6246 2.32 1.74 3 Very Fine Blue 25 MN505-6249 2.32 1.74 3 Super Fine Gray 25 MN505-6252 2.32 1.74

• For heavy deburring, cleaning and fi nishing

• Locks with a half twist • Available in package

quantity only

Roloc™ Surface Conditioning Discs

As Low As

91¢

Disc Pads And Shaft Disc Pad Max. Reg. Sale Dia. Hardness rpm Model # Price Price 2" Medium 25,000 MN505-6258 $17.60 $12.95 3 Medium 18,000 MN505-6260 21.46 14.95 1⁄4" Threaded Shaft MN505-6261* 2.53 1.95

Accessories

*Not 3M

SAVEUP TO

30%

Fibre Backed Discs

Aluminum Oxide Sale Price Each Zirconia Sale Price Each Grit Model # 1-24 25+ Model # 1-24 25+ 4" Dia., 5⁄8" Hole 24 MN391-6002 $ .73 $ .58 MN391-2950 $ 1.27 $1.02 36 MN391-6003 .70 .56 MN391-2951 1.20 .96 50 MN391-6004 .67 .54 MN990-1327 1.12 .90 60 MN391-6005 .65 .52 MN391-2952 1.01 .81 80 MN391-6006 .65 .52 MN990-1329 1.01 .81 41⁄2" Dia., 7⁄8" Hole 24 MN391-6102 .81 .65 — 36 MN391-6103 .78 .62 MN391-6602 1.41 1.13 50 MN391-6104 .74 .59 MN391-6603 1.28 1.02 60 MN391-6105 .73 .58 MN391-6604 1.21 .97 80 MN391-6106 .72 .58 MN391-6605 1.14 .91 100 MN391-6107 .72 .58 — 120 MN391-6108 .72 .58 — 5" Dia., 7⁄8" Hole 24 MN391-6202 .90 .72 MN990-1331 1.42 1.14 36 MN391-6203 .87 .70 MN391-6702 1.41 1.13 50 MN391-6204 .84 .67 MN391-6703 1.28 1.02 60 MN391-6205 .81 .65 MN391-6704 1.21 .97 80 MN391-6206 .79 .63 MN391-6705 1.14 .91 100 MN391-6207 .79 .63 — 120 MN391-6208 .79 .63 — 7" Dia., 7⁄8" Hole 24 MN391-6302 1.19 .95 MN391-6801 2.10 1.68 36 MN391-6303 1.16 .93 MN391-6802 1.89 1.51 50 MN391-6304 1.12 .90 MN391-6803 1.77 1.42 60 MN391-6305 1.10 .88 MN391-6804 1.68 1.34 80 MN391-6306 1.08 .86 MN391-6805 1.57 1.26

As Low As

52¢

Aluminum Oxide• Resin bond, fi bre backing • For weld removal, blending

and fi nishing on all ferrous metals• Long lasting, aggressive

cutting, fi rst qualityZirconia• Self-sharpening zirconia alumina offers

superior performance on all metals, including stainless steel and other tough alloys

• Resists loading, giving longer grinding life for heavy-duty stock removal

SAVEUP TO

20%

54-55 HD 15-08 Fluids_AB.indd 5554-55 HD 15-08 Fluids_AB.indd 55 7/15/15 8:32 AM7/15/15 8:32 AM



































































































http://use-enco.com

http://use-enco.com

The Lowest Prices in the Abrasives


Max. Low Price Dia. Thick. Hole rpm Model # EachGreen Corps 3" 1⁄32" 1⁄4" 35,000 MN505-6032 $5.89 3 1⁄32 3⁄8 35,000 MN505-6033 5.89 3 1⁄16 3⁄8 28,000 MN505-6031 5.89 4 1⁄32 3⁄8 26,250 MN505-6034 6.85General Purpose 3 1⁄32 3⁄8 25,000 MN990-1148 1.70 3 1⁄16 3⁄8 25,000 MN990-1149 1.70

50 Per Case

• High cut rates • Long life • Use on most

materials including fi berglass, stainless steel, mild steel and alloys

General Purpose• Use on a variety of materials• Ideal for cutting sheet metal, frame nails,

clamps and rusted bolts

Cut-Off WheelsGreen Corps™

Type 1 Reinforced Cut-Off Wheels3M™ High Performance & Cubitron™ II

3M™ Cubitron™ II• Designed to provide high cut rates and long life

on all types of ferrous metals, stainless steels, alloy steels and cast iron

• Premium performance• Precision shaped

grain for ultra fast, cool cutting action and long life

3M™ High Performance• Ideal combination

of value and performance

• Ceramic abrasive grain for fast cut and long life

• Specially formulated to be used on stainless and mild steel

High Wheel Wheel Hole Max. Performance Reg. Sale Cubitron II Reg. Sale Dia. Thick. Size rpm Grade Model # Price Price Model # Price Price 3" 0.035" 1⁄4" 25,465 60 — MN414-0653 $4.55 $3.87 3 0.035 3⁄8 25,465 60 MN414-0639 $2.71 $2.30 MN414-0654 4.55 3.87 3 0.060 1⁄4 25,465 36 MN414-0640 2.71 2.30 — 3 0.060 3⁄8 25,465 36 MN414-0641 2.71 2.30 MN414-0656 4.55 3.87 4 0.035 1⁄4 19,100 60 MN414-0642 3.96 3.37 MN414-0657 6.24 5.30 4 0.035 3⁄8 19,100 60 MN414-0643 3.96 3.37 MN414-0658 6.24 5.30 4 0.045 5⁄8 15,300 60 MN414-0645 3.96 3.37 MN414-0660 6.54 5.56 4 0.060 3⁄8 19,100 36 MN414-0646 3.96 3.37 MN414-0661 6.54 5.56 4 0.060 5⁄8 15,300 36 — MN414-0662 6.54 5.56 4 0.090 5⁄8 15,300 60 MN414-0648 3.96 3.37 MN414-0663 6.54 5.56 41⁄2 0.045 7⁄8 13,300 60 MN414-0649 3.15 2.68 MN414-0664 4.92 4.18 5 0.045 7⁄8 12,250 60 MN414-0650 3.52 2.99 MN414-0665 5.58 4.74 6 0.045 7⁄8 10,200 60 MN414-0651 4.11 3.49 MN414-0666 5.92 5.03 7 0.045 7⁄8 8500 60 MN414-0652 5.19 4.41 MN414-0667 7.95 6.76

As Low As

$230

Price Per Roll Grit Model # Reg. Sale 80 MN619-0551 $45.47 $37.95 100 MN619-0533 42.47 35.95 120 MN619-0552 42.00 35.95 180 MN619-0553 42.00 35.95 220 MN317-1377 42.00 35.95 320 MN619-0554 42.00 35.95

• Aluminum Oxide Stikit™ disc roll on C-wt. intermediate paper backing

• Excellent for metalworking and woodworking• 3M Stikit™ have a pressure- sensitive

adhesive backing for press-on, peel-off convenience

• Eliminates slippage between the sander back-up pad and the abrasive, resulting in higher cut rates with fewer interruptions for replacement of sandpaper

• 100 discs per roll

Stikit™ 5" 236U Disc Rolls

Disc Pad• Plastic hub/foam body • 5 x 3⁄4 x 5⁄16"-24 Ext.Model # MN619-0531Reg. Price $29.32 Sale Price $15.95

File Card & Brush Combo



• Cleans fi les and removes fi lings on fi ner-cut fi les

• 91⁄4" OAL • Wood handle

Manufactured from tough synthetic fi bers bonded together with specially formulated resins and impregnated with mineral grain, creating a consistent, open, 3-dimensional structure. • Will not rust • Can be used dry for

scuffi ng and fi nishing, or with water or chemical solvents for wet applications

6 x 9" Abrasive Hand Pads

Description & Pkg. Low Price Color Material Grade Applications Qty. Model # Each Tan A/O Coarse For quick cleaning, fi nishing & deburring. 10 MN337-6373 $1.81 White Nylon Super Fine Light-duty with non-abrasive. 20 MN384-0040 .70 Maroon A/O Very Fine For general-purpose cleaning, blending, fi nishing & deburring. 20 MN384-0010 .65 Light S/C Ultra Fine For metals, woods, plastics, Gray composites & countertops. 20 MN384-0020 .74 Green A/O Very Fine For removal of stains, marks, rust & corrosion. 20 MN384-0030 .72

Perfect for hand

fi nishing & cleaning

Outstandingcuttingaction!

Knotted Wire Cup Brushes

For fl at brushing, surface preparation, removal of welds and burs and weld cleaning.• Low to medium fl exibility for more aggressive

cutting action• Maximum fatigue resistance

for long, effi cient brush life • 5⁄8"-11 arbor hole • Carbon steel• Appropriate size for air

and portable power tools

Brush Wire Max. Reg. Sale Dia. Size rpm Model # Price Price 23⁄4" .0140" 14,000 MN619-0390 $19.86 $16.85 23⁄4 .0200 14,000 MN327-9472* 19.50 16.55 23⁄4 .0200 14,000 MN619-0392 19.50 16.55 31⁄8 .0410 14,000 MN619-0394† 20.35 17.30 31⁄2 .0200 14,000 MN619-0396 20.94 17.80 4 .0140 6000 MN619-0398 29.54 25.00 4 .0250 6000 MN619-0399 27.43 23.00*3⁄8"-24 arbor hole †Crimp wire brush

SAVE15%

56-57 HD 15-08 AB.indd 5656-57 HD 15-08 AB.indd 56 7/15/15 8:33 AM7/15/15 8:33 AM




















































Industry GUARANTEED! Abrasives


SAVEUP TO

18% Reg. Sale W Grit Model # Price Price 1" 80, 120, 180 MN337-1068 $34.42 $29.95 1 120, 180, 240 MN337-1069 34.42 29.95 11⁄2 80, 120, 180 MN337-1070 51.62 45.95 11⁄2 120, 180, 240 MN337-1071 51.62 45.95 2 80, 120, 180 MN337-1072 68.84 55.95 2 120, 180, 240 MN337-1073 68.84 55.95

Shop Roll Assortment PacksAluminum OxideThree 25 Yd. Rolls in Each Pack• Convenient dispenser pack with three grits

As Low As

$2995

Wheel Density/ Max. Mfr’s Sale Material Grit rpm Model # List Price 6D x 1⁄2W x 1"H A/O 8 Med. 6000 MN505-6160 $51.80 $39.59 S/C 9 Fine 6000 MN505-6165 51.80 39.95 6D x 1W x 1"H A/O 8 Med. 6000 MN505-6161 72.52 55.95 S/C 8 Fine 6000 MN505-6163 72.52 55.95 S/C 9 Fine 6000 MN505-6166 72.52 55.95 S/C 8 Med. 6000 MN990-1147 72.52 59.95 8D x 1W x 3"H A/O 8 Med. 4500 MN505-6162 90.70 69.95 S/C 8 Fine 4500 MN505-6164 90.70 69.95 S/C 9 Fine 4500 MN505-6167 90.70 69.95

SAVEUP TO

23%

EXL Deburring WheelsConvolute

• Silicon carbide or aluminum oxide

Starting At

$3959

3M™ Cubitron™ II• Designed to provide high cut rates and long life on all types

of ferrous metals, stainless steels, alloy steels and cast iron• Precision-shaped grain for ultra-fast, cool-cutting action

and long life

3M™ High Performance• Ceramic abrasive grain for fast cut

and long life• Specially formulated to be used on

stainless and mild steel

• For Cutting Steels & Metals 3M™ High Performance & Cubitron™ II Cut-Off Wheels • Reinforced

Wheel Wheel Hole Cubitron II Reg. Sale Dia. Thick. Size Grade Model # Price Price 41⁄2" .090" 5⁄8"-11 36 MN414-0690 $6.36 $5.29 41⁄2 .090 7⁄8 36 MN414-0691 5.20 4.29 41⁄2 .125 5⁄8-11 36 MN414-0692 9.25 7.69 41⁄2 .125 7⁄8 36 MN414-0693 8.09 6.69 5 .090 7⁄8 36 MN414-0697 6.10 4.99 7 .090 5⁄8-11 60 MN414-0702 12.65 10.95 7 .090 7⁄8 60 MN414-0703 11.14 9.95

Depressed Center Wheels

High Wheel Wheel Hole Performance Reg. Sale Cubitron II Reg. Sale Dia. Thick. Size Grade Model # Price Price Grade Model # Price Price 4" .045" 5⁄8" 60 MN414-0708 $3.96 $3.29 60 MN414-0715 $6.54 $5.39 41⁄2 .045 5⁄8-11 60 MN414-0709 5.00 4.09 60 MN414-0716 6.36 5.29 41⁄2 .045 7⁄8 60 MN414-0710 3.59 2.99 60 MN414-0717 5.20 4.29 5 .045 5⁄8-11 36 MN414-0711 5.61 4.59 60 MN414-0718 7.62 6.29 5 .045 7⁄8 36 MN414-0712 4.20 3.49 60 MN414-0719 6.10 4.99 6 .045 5⁄8-11 60 MN414-0713 5.97 4.89 60 MN414-0720 7.85 6.49 6 .045 7⁄8 60 MN414-0714 4.56 3.79 36 MN414-0721 6.59 5.49

Type 27 Cut Off Wheels

Type 27 Cut-Off Wheels & Depressed Center Wheels

As Low As

$299

Fibre DiscsAluminum Oxide

• Aluminum-oxide grain abrasive on heavy fi bre backing

• Good for small job shops and general-purpose applications

Aluminum Oxide• Best used for economical,

general-purpose grinding, deburring and blending ferrous and nonferrous materials

• High cut rate and durability• For use with pneumatic

and electric power tools and grinders

Arbor Hole Reg. Sale Dia. Size Grit Model # Price Price 41⁄2" 7⁄8" 24 MN337-7815 $ .77 $ .56 41⁄2 7⁄8 36 MN337-7816 .75 .54 41⁄2 7⁄8 50 MN337-7817 .71 .51 41⁄2 7⁄8 60 MN337-7818 .70 .51 41⁄2 7⁄8 80 MN337-7819 .70 .50 41⁄2 7⁄8 100 MN337-7820 .70 .50 41⁄2 7⁄8 120 MN337-7821 .70 .50 5 7⁄8 24 MN337-7823 .84 .60 5 7⁄8 36 MN337-7824 .83 .60 5 7⁄8 50 MN337-7825 .80 .57 5 7⁄8 60 MN337-7826 .77 .56 5 7⁄8 80 MN337-7827 .76 .54 7 7⁄8 24 MN337-7831 1.13 .81 7 7⁄8 36 MN337-7832 1.10 .79 7 7⁄8 60 MN337-7834 1.03 .75 7 7⁄8 100 MN337-7836 1.02 .74

As Low As

50¢

SAVEUP TO

28%

Zirconia Alumina & Aluminum Oxide Flap DiscsType 29

• Hole dia.: 7⁄8" • Use on portable disc

grinders and sandersAluminum Oxide• Use for weld removal, blending,

fi nishing and deburring on all ferrous metals

• General-purpose sanding and grinding

Zirconia Alumina• Use on stainless steel and other

tough metals for heavier stock removal and increased durability

Zirconia Aluminum Alumina Oxide Reg. Sale Dia. Grit Model # Model # Price Price 41⁄2" 24 MN391-7240 MN391-7200 $6.09 $4.69 41⁄2 40 MN391-7242 MN391-7202 6.09 4.69 41⁄2 60 MN391-7244 MN391-7204 6.09 4.69 41⁄2 80 MN391-7246 MN391-7206 6.09 4.69 41⁄2 120 MN391-7248 MN391-7208 6.09 4.69 7 36 MN240-3611 — 12.85 8.99 7 60 MN240-3612 — 12.85 8.99 7 80 MN240-3613 — 12.85 8.99 7 120 MN240-3614 — 12.85 8.99

As Low As

$469SAVE

UP TO

30%




































































http://use-enco.com

Abrasives FAST & FRIENDLY Customer


4 1⁄2" Dia.

Coarse Medium Fine X-Fine Reg. Sale Width Thick. Dia. Model # Model # Model # Model # Price PriceOblong 1" 3⁄8" — MN388-4055 MN388-4056 MN388-4057 MN388-4058 $13.70 $10.95Square 1⁄2 1⁄2 — MN388-4060 MN388-4061 MN388-4062 MN388-4063 11.94 9.55Round — — 1⁄4" MN388-4065 — MN388-4067 MN388-4068 6.23 4.95 — — 3⁄8 MN388-4070 MN388-4071 MN388-4072 MN388-4073 7.11 5.65 — — 1⁄2 MN388-4075 MN388-4076 MN388-4077 MN388-4078 9.88 7.89

6" Rubberized Abrasive Blocks & SticksCratex blocks and sticks are excellent for cleaning and polishing metal surfaces, for breaking edges, smoothing away high spots, removing rust, heat marks, tarnish and stain.

As Low As

$495

• 150 grit • Medium cut • Diamond impregnated • Needle precision • 61⁄4" OAL • 3" LOC• Includes fl at, round, square,

three square, half round, and triangle fi les

10 Pc. Diamond Needle File Set



SAVEOVER

20%

• Designed for durability on tougher burs

• 6" wheels have 6000 max. rpm and 8" wheels have 4500 max. rpm

EX2 Deburring WheelsHarder Than EXL

Hole Reg. Sale Size Dia. Material Grade Density Model # Price Price6 x 1⁄2" 1" A/O Medium 8 MN317-1738 $59.01 $45.956 x 1⁄2 1 S/C Fine 8 MN317-1739 59.01 45.956 x 1⁄2 1 S/C Medium 8 MN317-1740 61.38 47.956 x 1 1 A/O Medium 8 MN317-1741 82.61 64.956 x 1 1 S/C Fine 8 MN317-1742 82.61 64.956 x 1 1 S/C Medium 8 MN317-1743 82.61 64.956 x 1 1 S/C Fine 9 MN317-1744 82.61 64.958 x 1 3 A/O Medium 8 MN317-1747 103.31 80.958 x 1 3 S/C Medium 8 MN317-1749 103.31 80.958 x 1 3 S/C Fine 9 MN317-1750 103.31 80.95

SAVE30%

Type 27 Flap Discs

• 100% zirconia • Recommended for

aggressive use • One-step grinding,

blending and fi nishing of metal

• Layered for cooler grinding and longer life

As Low As

$465

Reg. Sale Grit Model # Price Price 7⁄8" Hole Dia. 24 MN327-9344 $6.70 $4.65 36 MN327-9347 6.70 4.65 40 MN317-1246 6.70 4.65 60 MN327-9362 6.70 4.65 80 MN327-9348 6.70 4.65 120 MN327-9349 6.70 4.65 5⁄8"-11 Hole Dia. 24 MN327-9351 9.37 6.55 36 MN327-9352 9.37 6.55 40 MN327-9353 9.37 6.55 60 MN327-9354 9.37 6.55 80 MN327-9355 9.37 6.55 120 MN327-9350 9.37 6.55

• Holds fi les, drills, reamers, taps, countersinks, mold polishing stones, gage pins, etc.

• Small universal holding device for handheld applications

• Designed like a drill chuck with 3 adjustable steel jaws

• .010-.312" (1-8mm) capacity



Handy Chuck Pin Vise

21 Pc. HSS Deburring SetIncludes: (20) B10 HSS blades and soft grip holder



SAVEUP TO

35% Price Each Type R Type S Less Than Pkg. Dia. Grade Model # Model # Pkg. Qty. Qty. Pkg. Qty.: 50 1" Medium MN317-1453 — $ .50 $ .38 11⁄2 Coarse MN240-3564 MN240-3555 .55 .42 11⁄2 Medium MN240-3565 MN240-3556 .55 .42 11⁄2 Very Fine MN240-3566 MN240-3557 .55 .42 2 Coarse MN240-3567 MN240-3558 .71 .54 2 Medium MN240-3568 MN240-3559 .71 .54 2 Very Fine MN240-3569 MN240-3560 .71 .54 Pkg. Qty.: 25 3 Coarse MN240-3570 MN240-3561 1.27 .91 3 Medium MN240-3571 MN240-3562 1.27 .91 3 Very Fine MN240-3572 MN240-3563 1.27 .91

Quick-Change Surface Conditioning DiscsAluminum Oxide

Type R are interchangeable with Roloc, Lockit, TR, and Type III style. Type S are interchangeable with TS, Socatt, Speedlock and Type II style.

For use with a variety of electric and air-powered tools for deburring, blending, cleaning and fi nishing.• High initial and extended rate of cut• Maintains high-cut rate with light pressure• Most effi cient on ferrous metals where fi nal

fi nish is important

































































AbrasivesService 800-USE-ENCO


20 Pc. Mounted Point Set

For use with air and electric die grinders, plus mold and die machines. • 13⁄4" long • 1⁄8" shank• Assorted shapes and sizes • Diamond plated • In indexed plastic case



Used to dress a straight face onto a straight wheel or to dress a particular form onto a wheel face. • Normal tool infeed is .0005" per pass• Traverse rates range from 8 to 10 ipm

2" Single Point Diamond Dressing Tools

Carat Shank Reg. Sale Wt. Dia. Model # Price Price 1⁄5 3⁄8" MN398-8500 $18.42 $13.95 1⁄4 3⁄8 MN398-8502 20.16 14.95 1⁄4 7⁄16 MN398-8504 20.16 14.95 1⁄3 3⁄8 MN398-8506 22.49 16.95 1⁄2 3⁄8 MN398-8510 27.50 19.95 1⁄2 7⁄16 MN398-8512 27.50 19.95 3⁄4 3⁄8 MN398-8514 38.07 28.95 1 7⁄16 MN398-8520 53.75 39.95

SAVEUP TO

27%

General Purpose, Machinist & Maintenance File Sets

9 Pc. Maintenance Set Includes:• 10"/250mm: Flat bastard, mill

bastard, half-round bastard, round bastard

• 8"/200mm: Half-round bastard, fl at bastard

• 6"/150mm: Slim taper fi le • XX Slim taper fi le• 12" Mill bastard fi le • With ergonomic handles

8 Pc. Machinist Set Includes:• Same as 7 piece set, plus

10"/250mm fi le cleaner cord

Mfr’s Sale Set Model # List Price 3 Pc. General Purpose w/Ergo Handle MN893-1319 $37.07 $17.79 5 Pc. General Purpose MN382-1312 65.90 31.59 5 Pc. General Purpose w/Ergo Handle MN893-1320 72.55 35.29 7 Pc. Machinist File Set MN619-0321 109.80 61.95 8 Pc. Machinist File Set MN382-1308 141.16 68.95 9 Pc. Maintenance File Set w/Ergo Handles MN893-1321 169.18 74.95

7 Pc. Machinist Set Includes:• 10"/250mm: Mill bastard, half-round

bastard, fl at bastard, fl at smooth, square bastard, round bastard

• 7"/175mm: Slim taper fi le

5 Pc. General Purpose Sets include:• 10" Half-round bastard, mill bastard fi les• 8" Mill bastard, mill smooth fi les• 6" Slim taper fi le• MN893-1320 with ergonomic handles

3 Pc. General Purpose Set includes:• 6" Slim taper, round, mill bastard fi les• With ergonomic handles

MN893-1321

SAVEUP TO

55%

Starting At

$1779

12 Pc. Round HandleNeedle File Sets

• Assorted shapes in a plastic fi tted pouch

• Production grade

#0 Cut #2 Cut Reg. Sale Length Model # Model # Price Price 51⁄2" MN990-1232 MN382-0052 $9.98 $8.95 61⁄4 MN382-0060 MN382-0062 10.56 8.95

Your Choice

$895 Reg. Sale Grit Model # Price Price 1 x 42" 24 MN385-9205 $2.01 $1.60 36 MN385-9200 1.86 1.48 40 MN385-9201 1.68 1.34 50 MN385-9202 1.55 1.24 60 MN385-9203 1.42 1.13 80 MN385-9204 1.13 .90 2 x 48" 24 MN385-9215 3.38 2.70 36 MN385-9210 3.38 2.70 40 MN385-9211 3.07 2.45 50 MN385-9212 2.82 2.25 60 MN385-9213 2.60 2.08 80 MN385-9214 2.36 1.88 21⁄2 x 60" 24 MN385-9265 5.79 4.63 36 MN385-9260 5.79 4.63 40 MN385-9261 4.95 3.96 50 MN385-9262 4.54 3.63 60 MN385-9263 3.85 3.08 80 MN385-9264 3.85 3.08 3 x 21" 24 MN385-9225 2.65 2.12 36 MN385-9220 2.38 1.90 40 MN385-9221 2.38 1.90 50 MN385-9222 2.14 1.71 60 MN385-9223 2.14 1.71 80 MN385-9224 2.14 1.71 3 x 24" 24 MN385-9245 2.75 2.20 36 MN385-9240 2.75 2.20 40 MN385-9241 2.31 1.84 50 MN385-9242 2.31 1.84 60 MN385-9243 2.31 1.84 80 MN385-9244 2.31 1.84 4 x 36" 24 MN385-9235 5.62 4.49 36 MN385-9230 5.18 4.14 40 MN385-9231 4.80 3.84 50 MN385-9232 4.80 3.84 60 MN385-9233 4.80 3.84 80 MN385-9234 5.14 4.11 6 x 48" 24 MN385-9255 10.80 8.64 36 MN385-9250 9.97 7.97 40 MN385-9251 9.97 7.97 50 MN385-9252 9.39 7.51 60 MN385-9253 9.39 7.51 80 MN385-9254 8.01 6.40

• Sharp, long-lasting zirconia grain on a heavy cloth belt

• For heavy grinding and deburring on all nonferrous metals, tool steel, cast iron, plastic and wood

Zirconia GrainSanding Belts

SAVE20%

































































http://use-enco.com


Shop the Enco Master CatalogHand Tools

Scout™ & Folding Sheath Knife™

• Drop-point blade • Includes Bear’s Priorities of Survival pocket guide• Partially serrated high-carbon stainless steel blade• Blades have lock back—locks blade securely in place Scout™

• Ergonomic textured rubber grip handleFolding Sheath Knife™

• Ergonomic, textured rubber grip handle

• Comes with lightweight, mildew-resistant nylon sheath

Bear Grylls Knives

Blade Closed Reg. Sale Description L L OAL Model # Price Price Scout™ 3.3" 4" 7.3" MN411-2059 $34.95 $19.95 Folding Sheath Knife™ 3.6 4.9 8.5 MN411-2060 37.95 25.95

Folding Blade

As Low As

$1995Metalmaster® Super Snips

• Stands up to heavy stock

• Compound spring action for fast, effortless feed

• Non-slip textured grips, safety latch and serrated jaw made of tough molybdenum steel

• High-tensile-strength alloy steel handle

• 93⁄4"L with a 13⁄8" length of cut

SAVE35%

M3R

M2R

M1R

Cut/Color Mfr’s # Model # Left/Red M1R MN842-1222 Right/Green M2R MN842-1224 Straight/Yellow M3R MN842-1226

Your Choice

$1695Mfr’s List: $26.31

2 Pc. Pipe Wrench SetsMFR'S LIFETIME

WARRANTY• Extra-large, self-cleaning threads • Special heat treatment provides smooth spin for nut

Cast-Iron Set• Heavy-duty design to help professionalsIncludes: 8 & 14"Model # MN414-1592 Low Price $27.29

Aluminum Set• Extra light design • Nonsparking,

non-magnetic and lifetime corrosion resistanceIncludes: 10 & 18"Model # MN414-1593 Low Price $55.99

MN414-1596

Screwdriver Sets

8 Pc. 100 Plus® Slotted & Phillips SetAcetate HandlesIncludes:• 3 slotted round: 1⁄4 x 4", 5⁄16 x 6", 3⁄8 x 8"• 3 Phillips round: #1 x 3", #2 x 4", #3 x 6"• Slotted round stubby: 1⁄4 x 11⁄2"• Phillips round stubby: # 2 x 11⁄2"• Vinyl pouchMfr’s # 66-158Model # MN414-1594 Mfr’s List $54.06 Sale Price $34.95

10 Pc. Standard Fluted SetIncludes:• 2 slotted round: 1⁄4 x 4", 1⁄4 x 6"• 2 cabinet: 3⁄16 x 3", 3⁄16 x 6"• 2 Phillips #1 x 4, #2 x 4• Slotted stubby: 1⁄4 x 11⁄2"• Slotted pocket: 1⁄8 x 2"• Phillips stubby: #2 x 11⁄2"• Phillips pocket: #0 x 2"Mfr’s # 60-100Model # MN414-1595 Mfr’s List $15.63 Sale Price $9.6510 Pc. Standard Fluted Set with Tape MeasureIncludes:• 3 slotted round: 1⁄8 x 2", 1⁄4 x 4", 1⁄4 x 6"• 2 cabinet round: 3⁄16 x 3", 3⁄16 x 6"• 3 Phillips: #0 x 4", #1 x 4", #2 x 4"• Slotted stubby: 1⁄4 x 11⁄2"• Phillips stubby: #2 x 11⁄2"• 16' tape measure • Storage rackMfr’s # 60-112KModel # MN414-1596 Mfr’s List $22.03 Sale Price $13.29

MFR'SWARRANTY

Face Reg. Sale Weight Dia. OAL Model # Price Price 10 oz. 11⁄4" 105⁄8" MN990-3137 $13.65 $7.95 17 17⁄16 11 MN990-3138 16.40 9.95 24 13⁄4 12 MN990-3139 21.86 11.95 36 23⁄16 139⁄16 MN990-1969 25.28 13.95 48 23⁄8 143⁄4 MN990-1970 32.12 17.95

• Hot-cast, one-piece construction

• Shot loaded • Steel-reinforced• No exposed metal

Dead Blow Hammers

As Low As

$795A L A

SAVEUP TO

45%

MN891-5174

• Ergonomic cushion-grip handle

• Angles work at 25°• Includes stand

T-Handle Hex Key Sets

Size Mfr’s Sale Set Range Model # List Price Hex Sets 8 Pc. 2-10mm MN891-5173 $46.45 $26.95 10 3⁄32-3⁄8" MN891-5172 50.65 29.95 Balldriver® Sets 8 2-10mm MN891-5175 47.35 26.95 10 3⁄32-3⁄8" MN891-5174 57.00 29.95

SAVEUP TO

47%

• Max-Drive™ system helps reduce fastener rounding

• 15° box end offset for additional knuckle clearance

• Full polish plating for anti-corrosion protection and easy cleaning

• Meets or exceeds ANSI specifi cations

11 Pc. Combination Wrench Sets

Size Mfr’s Sale Range Model # List Price 7–17mm MN414-2274 $40.69 $25.95 1⁄4–13⁄16" MN414-2275 40.69 25.95

MFR'SWARRANTY

Your Choice

$2595

60-61 HD 15-08 HT.indd 6060-61 HD 15-08 HT.indd 60 7/15/15 8:35 AM7/15/15 8:35 AM


























Hand Tools

Includes: 8, 12, 16, 24 & 32 oz.

5 Pc. Ball Pein Hammer SetFiberglass Handles


$32

SAVE48%

• Satin-chrome fi nish with heavy-duty jaws and handles

• Nickel-plated fi nish resists rust

• WR Series: Built-in wire cutterIncludes: 5WR, 6LN, 7CR, 10R and 10WR. Mfr’s # 2077704

Locking Plier SetWith BONUS Irwin Bag


$4595Mfr’s List: $88.42

MFR'SWARRANTY


$21Mfr’s List: $36.31

SAVE42%• Shaped and polished ends

• Superior tensile strength• Made from tough,

shock-resistant tool steel• Special heat-treated

and modifi ed-parabolic struck end resists mushrooming and chipping

Includes:• 1⁄4, 5⁄16" center punches• 1⁄16, 1⁄8, 5⁄32, 3⁄16, 1⁄4,

5⁄16" pin punches• 3⁄32" starter punch • 3⁄8, 1⁄2, 5⁄8"

cold chisels• Vinyl pouchMfr’s # 16-299

12 Pc. Cold Chisel & Punch Set

MFR'SWARRANTY

SAVE46%

7 Pc. Roll Pin Punch Set

Includes 1⁄16, 3⁄32, 1⁄8, 5⁄32, 3⁄16, 7⁄32 and 1⁄4" roll pin punches in a vinyl pouchMfr’s # J49007


$3995Mfr’s List: $74.20

Ignition Wrenches & Sets

• Inch • Satin-chrome fi nish• Use for assembly, construction, fabrication,

electronics, manufacturing, maintenance, production, engine repair, turning fasteners

Mfr’s Sale Size OAL Model # List Price 13⁄64 x 15⁄64" 33⁄16" MN414-0076 $8.97 $6.00 7⁄32 x 1⁄4 33⁄16 MN414-0077 8.97 6.00 15⁄64 x 13⁄64 33⁄16 MN414-0078 8.97 6.00 1⁄4 x 7⁄32 33⁄16 MN414-0079 8.97 6.00 17⁄64 x 19⁄64 31⁄2 MN414-0080 8.97 6.00 9⁄32 x 5⁄16 31⁄2 MN414-0081 9.15 6.12 5⁄16 x 9⁄32 31⁄2 MN414-0082 9.15 6.12 11⁄32 x 3⁄8 313⁄16 MN414-0083 9.15 6.12 3⁄8 x 11⁄32 313⁄16 MN414-0084 9.57 6.42 7⁄16 x 1⁄2 41⁄2 MN414-0085 9.57 6.42

10 Pc. Set sizes 13⁄64-1⁄2"Model # MN414-0086 Mfr’s List $66.69 Sale Price $40.88

MFR'SWARRANTY

SAVEUP TO

45% Mfr’s Sale Set Model # List Price 9 Pc. Metric MN308-0643 $20.60 $11.39 13 Pc. Inch MN308-0642 25.45 13.99 22 Pc. Combo MN308-0641 40.00 22.99

GoldGuard™ Balldriver Ball End Hex Key Sets14K Gold Plated for Corrosion Resistance & Easy Identifi cation9 Pc. Set—1.5-10mm13 Pc. Set—.050-3⁄8"22 Pc. Combo Set—.050-3⁄8" and 1.5-10mm

22 Pc. Set Only

$2299

• (2) 11R, 11" locking C-clamps

• (2) 6R, 6" locking C-clamps

• 10R, 10" straight jaw locking plier

5 Pc. Locking C-Clamp Set



Includes BonusMen’s XL T-shirt with Vise-Grip

logo


$4895Mfr’s List: $78.21

ProTouch™ grips provide extra comfort for less hand fatigue.

Includes: 6, 8, 10, 12"; supplied with plastic tray.Mfr’s # 2078706

4 Pc. Pro Plier Adjustable Wrench Set

SAVE37%

MFR'SWARRANTY

FatMax® Demolition Pry Bars

• Forged steel• Larger cross-sectional area

than standard 3⁄4" hexagonal bar • Hi-visibility yellow• Flat “U” shaped prying end provides stable

base for lifting without damaging surfaces• Additional slot specifi cally for pulling nails• Tri-lobe design for increased strength

and durability • 1" tip width

Mfr’s Sale OAL Model # List Price 24" MN414-2262 $20.53 $14.99 36 MN414-2263 24.94 17.99

on

SAVE27%

60-61 HD 15-08 HT.indd 6160-61 HD 15-08 HT.indd 61 7/15/15 8:35 AM7/15/15 8:35 AM























http://use-enco.com

http://use-enco.com

Easy, Secure Shopping


Power Tools

SAVEUP TO

43%

Straight

Mfr’s Sale Description rpm Mfr’s # Model # List Price Straight 22,000 5054 MN505-3202 $110.00 $61.95 Right Angle 20,000 5055 MN505-3203 133.00 79.00

1⁄4" Air Die Grinders• Convenient built-in speed regulator• Straight grinder is rear exhaust• Right angle is front exhaust• Safety throttle • 1⁄4" collet

Right Angle Starting At

$6195

• Lever throttle • Hardened gearing• Rear exhaust • 22,000 rpm• 3⁄8"-24 spindle • 43⁄4" oal • 4 cfmIncludes: Die grinder, 5 ea. 1⁄8" and 1⁄4" arbor stones; 1⁄8" collet insert; hose adapter and open collet changing wrenches; molded case

1⁄4" Right Angle Die Grinder Kit



Extended Die Grinder• Ball bearing construction • Safety lever helps prevent

accidental start-ups • 22,000 rpm • 4 cfm • 1⁄4" collet • 1⁄4" air inlet • Rear exhaust • 13" oal



Bolt Max. Reg. Sale Capacity cfm oal rpm ipm Torque Model # Price Price 3⁄8" Butterfl y Impact Wrench 3⁄8" 3 57⁄8" 10,000 1000 5-50 ft./lbs. MN414-2157 $61.96 $43.00 1⁄2" Pistol Grip Impact Wrench 5⁄8 4 61⁄4 7000 600 25-200 MN414-2177 68.93 48.00

MN414-2157

3⁄8" & 1⁄2" Impact Wrenches• Supported ring socket retainer for quick

socket changes• Adjustable, multi-position torque regulator • Ball bearings • Reversible

As Low As

$43

Pneumatic Cut-Off Tool

• Easily replaceable wheels• Lever throttle• Rear exhaust• Ball-bearing construction• Steel fi xed spark guard• 3" wheel dia.• .45 hp• 22,000 max. rpm• 3⁄8" npt hose• 1⁄4" collet• 3⁄8" arbor

Cuts Through Steel Panels & Bolts


$3895

Die Grinders300 Series

• 0.25 hp motor • Ball-bearing construction • Aluminum housing • Safety-lock throttle lever • Front exhaust • 6 cfm average air consumption • 1⁄4" npft air inlet • 3⁄8" min. hose size Includes: 1⁄4" and 6mm collets and two wrenches.

Kits include: Tool, 2 wrenches, 6mm collet, 10 abrasive stones, manual and plastic case.

90˚ Angle• 21,000 rpmTool OnlyMfr’s # 301BModel # MN411-1003Mfr’s List $98.00 Sale Price $63.00KitMfr’s # 301BKModel # MN411-1005Mfr’s List $119.00 Sale Price $77.00

Straight• 28,000 rpmTool OnlyMfr’s # 307BModel # MN411-1004Mfr’s List $85.00 Sale Price $55.00KitMfr’s # 307BKModel # MN411-1006Mfr’s List $105.00 Sale Price $67.00

Combo Kit3-Tool Corded Combo

12 Amp SAWZALL® Reciprocating Saw Kit• 0-3000 spm • Gear protecting clutch • QUICK-LOK® blade clamp • 11⁄8" stroke • Includes caseMfr’s # 6519-31 Mfr’s List $240.003⁄8" Variable-Speed Electric Drill• Variable speed 2-fi nger trigger • Durable all-metal gear case • All-metal keyless ratcheting chuck• 8 amps • 0-2800 rpmMfr’s # 0240-20 Mfr’s List $126.0041⁄2" Angle Grinder• Tool-free wheel changes • Tool-free guards• Paddle switch w/lock-on • 5⁄8"-11 spindle• 11 amps • 1400 mwo • 11,000 rpmMfr’s # 6147-30 Mfr’s List $158.10

SAVE$325

Off Mfr’s List When Buying the Combo!

3 Tools Only

$199Model # MN414-2269

62-63 HD 15-08 PT.indd 6262-63 HD 15-08 PT.indd 62 7/15/15 8:36 AM7/15/15 8:36 AM
















Power Tools

SAVEOVER

45%ON SAW

Includes:• (3) 6" 24 tpi blades for thin metal cutting• (3) 6" 14 tpi blades for medium-to-thick metal cutting• (2) 6" 6 tpi blades for increased woodcutting control• (1) 9" 6 tpi blade for greater woodcutting capacity• Innovative, job site durable case for convenient blade storageMfr’s # 49-22-1145

• 0-3000 spm, excellent power and cut speed • 11⁄8" stroke• Gear-protecting clutch • Counterweighted mechanism• QUIK-LOK® blade clamp • 120v ACMfr’s # 6519-31

12 Amp SAWZALL® Reciprocating Saw


$125Mfr's List: $240.00

9 Pc. SAWZALL® Blade SetSale Price

Model # MN404-3036

$1595Mfr’s List: $29.30

• Overload protection • Electronic clutch

extends life of tool and prevents bind-up

• Advanced airfl ow system – maximizes airfl ow and reduces debris ingress, improving motor performance and life

• 24% larger bevel gear extends tool life• Up to 50% more power • 100% tool-free

accessory changes • Tool-free adjustable guard • 11,000 rpm • 11 amps

41⁄2" Small Angle Grinders

Switch Mfr’s Sale Type Mfr’s # Model # List Price Paddle 6147-31 MN411-0990 $158.10 $89.00 Paddle w/Lock-on 6147-30 MN411-0993 158.10 89.00 Trigger 6121-31 MN411-0994 213.20 119.00 Trigger w/Lock-on 6121-30 MN411-0995 213.20 119.00

Starting At

$89

• For all air-powered tools• Provides excellent protection against rust and

corrosion of all internal parts• Extends tool life• Compatible with all systems and seal materials



SAVEOVER

15%

Almo® 525 Air Tool Oil

Industry’s Lightest Full-Size Random Orbital Sander• Low profi le for outstanding control • Low air consumption and vibration• 12,000 rpm free speed • Two 3⁄16" orbit patterns• Includes three interchangeable grips

Pad Dia. Mfr’s # Model # 5" MP4400-05 MN890-9853 6 MP4400-06 MN890-9854

SAVE45%

Your Choice

$159Mfr’s List: $291.00

Ergonomic Random Orbital Sanders

PneumaticPencil Grinder• 5.25" length• Suitable for intermittent use in

industrial maintenance or non-intensive production

• 60,000 rpm • 1⁄8" collet spindle • 1⁄4" air inlet • 7 cfm • Air hose includedMfr’s # RP9104


$8995Mfr’s List: $176.00

SAVEOVER

45%

SAVE46%

• Compact, lightweight design for easy maneuverability

• Front exhaust• 90° angle head • 22,500 rpm • 43⁄4" length • 51⁄2 cfm avg.

air consumption • 1⁄4" npt air inlet • 3⁄8" min.

hose size Mfr’s # CP875

1⁄4" Mini Angle Die Grinder


$5595Mfr’s List: $105.00

41⁄2" Small Angle Grinders• 9 amp motor • Paddle switch • 5⁄8"-11 spindle • Tool-free wheel change • No-lock-on is a safety feature and cannot be

locked under any conditions

Grounded with No-Lock-On• Grounded 3-wire plug construction designed

for grounded tools • Front exhaust • Keyless guard • 10,000 rpm • Includes wheelMfr’s # DW802GModel # MN414-1465 Mfr’s List $189.44 Sale Price $109.00

Model # MN414-1457 Mfr’s List $176.58 Sale Price $99.00

w/One-Touch™ Guard• One-Touch™ guard allows for 360° rotation of

the guard with one single action • Low profi le, jam-pot gear case • Rear exhaust • 12,000 rpm

Mfr’s # DWE4120

Model # MN414-1458 Mfr’s List $176.58 Sale Price $99.00

w/One-Touch™ Guard & No-Lock-OnMfr’s # DWE4120N

1⁄4" Straight Die Grinder• Lock-off throttle prevents

accidental startup • 22,000 rpm• 26 cfm @ load • .4 hpMfr’s # CP872



62-63 HD 15-08 PT.indd 6362-63 HD 15-08 PT.indd 63 7/15/15 8:36 AM7/15/15 8:36 AM
















http://use-enco.com

http://use-enco.com

Material Handling & Storage It’s IN STOCK and


SAVE25%

• 30 pre-labeled compartments• Holds 1⁄8, 3⁄16,

1⁄4, 5⁄16, 3⁄8, 7⁄16, 1⁄2, 9⁄16, 5⁄8, 3⁄4, 7⁄8 & 1"

• 145⁄8L x 73⁄8W x 73⁄4"H

• Color: Gray• Wt.: 101⁄4 lbs.

End Mill Dispenser



SAVE20%



$199Mfr’s List: $249.40

• External lock bar with keyed lock • Full-width drawer pulls and friction drawer slides• 300 lb. capacity • 3 x 1" casters • 25 lbs. load rating per drawer • Upgraded LTL-shippable packaging • 26W x 14D x 44"H • Wt.: 73 lbs.Mfr’s # STC-266RD-F

Shop Series 26" Mechanics’6-Drawer Tool Center

• 133⁄8L x 91⁄4D x 2"H steel drawers• High impact polystyrene inserts with

scooped compartments• Finished in gray baked enamel• Complete with plastic scoop tray, hinged

cover, and positive pull-down latches• Drawers fi t securely in Durham Slide

Rack Cabinets Compartments Reg. Sale Number Size ( W x D) Model # Price Price 12 49⁄32 x 27⁄32" MN891-4036 $18.14 $15.95 16 33⁄16 x 27⁄32 MN891-4037 18.32 15.95 20 217⁄32 x 27⁄32 MN891-4038 18.98 16.95 21 (20) 2 x 27⁄32

(1) 33⁄4 x 115⁄8 MN891-4039 19.67 16.95 24 (20) 131⁄32 x 27⁄32

(4) 225⁄32 x 27⁄32 MN891-4040 19.94 16.95 Adjustable MN891-4041 21.15 18.95

MN891-4041

MN891-4036

Small Steel Storage Drawers Corrugated Shelf

Bin Boxes

• Fast, effi cient storage and organization system • 200 lb. test, white-fi nish, corrugated 4" high• Convenient hanging feature allows bin to be

suspended from shelf lip• Shipped fl at for

easy storage As Low As

55¢Each

12" Deep Price Each 18" Deep Price EachWidth Model # 1-49 50+ Model # 1-49 50+ 2" MN990-3720 $.74 $.55 MN990-3727 $1.08 $.81 3 MN990-3721 .87 .65 — 4 MN990-3722 .89 .67 MN990-3728 1.21 .91 6 MN990-3723 1.08 .81 MN990-3729 1.35 1.01 8 MN990-3724 1.24 .93 MN990-3730 1.48 1.11 10 MN990-3725 1.56 1.17 MN990-3731 1.83 1.37 12 MN990-3726 1.62 1.21 —

f SAVE

UP TO

25%On Qty.: 50+

Metal Drill Dispensers

Compartment fronts are marked with letters and numbers to show you what’s where. Each stackable compartment holds 12 to 36 drills, depending on size.Decimal equivalents are included. 145⁄8W x 73⁄8D x 73⁄4"H.

Shown with 3 dispensers stacked

Ship No. of Wt. Reg. Sale Desc. Drawers Lbs. Model # Price Price 1⁄16 to 1⁄2" by 64ths 3 10 MN309-0012 $77.90 $69.95 #1 to 60 5 13 MN309-0013 99.75 85.95 A to Z 3 11 MN309-0014 77.90 69.95 1 to 13mm by .5mm 3 11 MN240-5943 90.25 79.95

As Low As

$6995

No. of Wt. Mfr’s Sale Drawers Mfr’s # Lbs. Model # List Price Friction Slides 5 275B 121 MN811-3338 $936.40 $561.00 7 277B 138 MN811-3342 1,087.60 652.00 Ball-Bearing Slides 5 275XB 125 MN990-3525 968.00 539.00 7 277XB 142 MN990-3523 1,160.40 649.00 8 378XB 165 MN990-3500 1,233.40 740.00

5-Drawer Cabinet

27" Roller Cabinets• 18" deep friction or ball-bearing slide drawers• Four casters: 2 rigid, 2 swivel w/toe locks • Complete with cylinder lock and keys • Tamperproof internal locking system5-Drawer • Has swing-down panel that conceals and

secures storage compartment

7-Drawer Cabinet

As Low As

$561

LIFETIME LIMITEDWARRANTY

SAVEUP TO

44%

64-65 HD 15-08 MH.indd 6464-65 HD 15-08 MH.indd 64 7/15/15 8:37 AM7/15/15 8:37 AM
































Material Handling & StorageREADY TO SHIP!


SAVEUP TO

34%Strong and versatile containers will stack on one another, hang from louvered panels, rails, racks and carts, forming effi cient storing and moving systems, or can be used on standard shelving.• Bins are made of high-density polypropylene and are unaffected by weak acids and alkalis• Fully interchangeable with all popular brands of hanging/stacking bins• Large front label slot allows larger bar code scanning• Full-width lip on back of bin supports bin on hanging systems• Autoclavable up to 250˚F • FDA approved

Hanging/Stacking Bins

Bin Bins Price Per Case Price Per Case Outside Dim. Load Case Yellow Red Blue Reg. Sale Case Dividers Low W x D x H Cap. Qty. Model # Model # Model # Price Price Qty. Model # Price 41⁄8 x 53⁄8 x 3" 10 lbs. 24 MN317-0920 MN317-0921 MN317-0919 $25.46 $19.95 6 MN327-6187 $4.17 41⁄8 x 73⁄8 x 3 10 24 MN317-0924 MN317-0925 MN317-0923 44.36 34.95 6 MN327-6184 4.51 51⁄2 x 107⁄8 x 5 30 12 MN317-0928 MN317-0929 MN317-0927 56.19 44.95 6 MN327-6185 7.02 11 x 107⁄8 x 5 60 6 MN317-0935 MN317-0936 MN327-6197 42.42 27.95 6 MN327-6185 7.02 81⁄4 x 103⁄4 x 7 50 6 MN317-0939 MN317-0940 MN317-0938 45.06 30.79 6 MN327-6188 9.10

As Low As

$1995

Shop Series 26" Tool Storage

• External lock bar with keyed lock

• Full-width drawer pulls • Reinforced sidewall

construction • 25 lbs. load rating per drawer

Roller Cabinet: 26W x 18D x 32"H, 4 x 2" casters (500 lbs. cap. per cabinet)Top Chest: 26W x 12D x 171⁄2"HIntermediate Chest: 26W x 12D x 111⁄2"H

Roller Cabinet

Intermediate Chest

Top Chest

*Inset handles †Top mat

Mfr’s Sale Description Mfr’s # Model # List Price Red with Friction Drawer Slides 5-Drawer Roller Cabinet SCA-265RD-F MN405-0362 $270.84 $199.00 3-Drawer Intermediate Chest SIN-263RD-F MN405-0390* 146.77 109.00 7-Drawer Top Chest SCH-267RD-F MN405-0401 203.11 149.00 Black with Ball-Bearing Drawer Slides 5-Drawer Roller Cabinet SCA-265BK-B MN405-0366† 294.44 219.00 2-Drawer Intermediate Chest SIN-262BK-B MN405-0391 152.95 109.00 5-Drawer Top Chest SCH-265BK-B MN405-0403 218.57 159.00

1-YEARWARRANTY

Starting At

$109e

SAVEUP TO

28%

Boxes are 131⁄8L x 9D x 25⁄16"H. Reg. Sale Description Model # Price Price 6 Fixed Compartment MN819-2160 $8.13 $6.95 12 Fixed Compartment MN819-2165 8.13 6.95 16 Fixed Compartment MN819-2170 10.91 8.95 18 Fixed Compartment MN819-2175 8.13 6.95 24 Fixed Compartment MN819-2180 8.30 6.95 Adjustable Compartment MN510-0928 11.59 9.85 Steel Rack w/handle MN819-2190 55.88 52.95

Box with fixed compartments

Box with adjustable compartments

Rack with boxes

Large Plastic Compartment Boxes & RackHeavy-duty reinforced hinges keep cover in an upright position, making the content labels easy to read. Each cover is designed to overlap on all sides of the box, fi tting snugly against a shelf-like ledge. Two snap latches ensure secure closure and prevent parts from moving between compartments.

As Low As

$695

Rack holds up to 5 large compartment

boxes

As Low As

$1055

Giant Stack Hopper Bins• Bins stack to form tall, stable storage arrangements on fl oors or shelving for parts and tools• Side ribs ensure stability when stacked • Wide hopper front allows access to heavy or bulky items• Large comfortable grip handles • Large radius corners and a curved upper lip add strength • Color: Gray

Reg. Sale W D Ht. Model # Price Price 107⁄8" 171⁄2" 121⁄2" MN328-4451 $11.85 $10.55 197⁄8 151⁄4 127⁄16 MN328-4449 16.29 13.95 161⁄2 171⁄2 121⁄2 MN328-4456 17.91 14.95






































http://use-enco.com

Material Handling & Storage Over 90,000 PRODUCTS Available


Endless Type 5

Eye & Eye Twisted

Eye & Eye Flat

Reg. Sale L Model # Price Price 1 Ply 3' MN327-6093 $16.41 $10.95 4 MN327-6094 19.06 11.95 6 MN327-6095 24.37 15.95 8 MN327-6096 30.00 19.95 2 Ply 3 MN327-6107 34.14 21.95 4 MN327-6108 39.32 25.95 6 MN327-6109 49.67 32.95

Flat Twisted Reg. Sale L Model # Model # Price Price 1 Ply 3' MN327-6043 MN327-6041 $16.60 $10.95 4 MN327-6044 — 17.84 11.95 6 MN327-6045 — 20.38 12.95 8 MN327-6046 — 22.88 14.95 10 MN327-6042 — 25.42 16.95 2 Ply 3 MN327-6066 MN327-6063 20.27 12.95 4 MN327-6067 MN327-6064 23.00 14.95 6 MN327-6068 — 27.93 17.95 8 MN327-6069 — 34.14 21.95

Polyester Web Slings• Yellow abrasion-resistant treatment • Red core warning yarns aid inspection process • Tag for permanent identifi cation,

required by OSHA • 1"W

Eye & Eye - Flat or Twisted Type 3 & 4Lifting Capacity (Lbs.)1 Ply: Basket: 3200, Choker: 1250, Vert.: 16002 Ply: Basket: 6400, Choker: 2500, Vert.: 3200

Endless Type 5Lifting Capacity (Lbs.)1 Ply: Basket: 6400, Choker: 2500, Vert.: 32002 Ply: Basket: 12,400, Choker: 4900, Vert.: 6200

3-Drawer 10-Drawer 12-Drawer

LIFETIME LIMITEDWARRANTY

Mechanics’ Chests• Two-piece I-beam drawer slides permit smooth, easy full-drawer extension • Tamperproof, internal drawer locking system • Friction slides • Full-length, securely welded staked chest hinges • Partitioned top till holds lift-out tray • Durable, powder-coat fi nish • Drawers lock when the lid is closed by internal drawer locking system

Brown Red No. of Wt. Wrinkle Smooth Mfr’s Sale Drawers W x D x H Lbs. Mfr’s # Model # Mfr‘s # Model # List Price 3 261⁄8 x 12 x 143⁄4" 50 263B MN505-1637 263R MN990-3553 $501.80 $279.00 10 261⁄8 x 121⁄16 x 187⁄8 75 360B MN811-3304 360R MN505-1644 858.60 479.00 12 285⁄8 x 12 x 187⁄8 78 2812B MN405-0717 2812R MN405-0715 1,042.80 569.00

Starting At

$279

SAVEUP TO

45%

Nonlocking Plate Clamps• Requires constant tension during lift • Design ensures tough and lasting service• Cams and pads are of hardened tool steel • Designed and manufactured to ASME B30.20

WARNING: Do not exceed the Working Load Limit. Serious bodily injury or property damage may result. Plate clamps should only be used for lifting single mild steel plates in the load and size capacity of the clamp. Not for use in Horizontal Lifting Rigs.

Working Max. Load Plate Throat Bale Reg. Sale Limit Thick. Depth Open. Model # Price Price 1000 lbs. .60" 1.56" 13⁄4" MN890-9359 $119.14 $99.95 2000 .78 2.90 21⁄2 MN890-9360 191.36 160.75 4000 1.00 2.90 31⁄8 MN890-9361 265.96 222.95

20

SAVE16%

Get more fl oor space—store long items vertically.• Perfect for fl at stock, drill rod, threaded rod,

pipe and other hard-to-store items • 3000 lbs. capacity • 84" overall ht. • All-steel welded construction • Base measures 36W x 24"D • Arms extend 8" beyond shelves • Shipped knocked down • Wt.: 141 lbs.

Vertical Bar Storage Rack


$29995

Pneumatic Shop Seat

• Cushioned black vinyl cover on 121⁄2" dia. seat

• Easy height adjustment from 151⁄2 to 201⁄2"

• Large 151⁄4" dia. tool tray• 5 casters


$3695

Modular Steel Frame Storage Cabinets

• Stackable, gray steel cabinets • High-impact polystyrene windowed drawers with

scoop bottom for easy part retrieval and 2 dividers • 17W x 11D x 11"H overall

20 Drawer

Drawers Inside Drawer Per Dimensions Cabinet W x D x H Model # 9 53⁄16 x 109⁄16 x 31⁄16" MN505-1784 15 33⁄16 x 109⁄16 x 31⁄16 MN505-1785 16 4 x 109⁄16 x 21⁄8 MN505-1786 20 33⁄16 x 109⁄16 x 21⁄8 MN505-1787 28 23⁄16 x 109⁄16 x 21⁄16 MN505-1788

Your Choice






































Material Handling & StorageOnline at use-enco.com


Tufl ex™ Endless Round Slings

• Made of polyester yarns covered by double-wall polyester tubular webbing, without side stitching, to cover the load-bearing core yarns

• Wear points can be shifted, and improved load balance can be achieved by spreading the sides

• Choke tightly and unchoke easily after use

• Tuff-Tag™ guaranteed to outlast sling—includes rated capacities, sling type, width, length, material and warning

Reg. Sale L Model # Price Price Purple 3' MN828-9680 $11.31 $7.95 4 MN828-9681 14.36 9.95 6 MN828-9682 20.45 14.95 8 MN828-9683 26.54 18.95 Green 3 MN828-9685 14.96 10.95 4 MN828-9686 18.98 13.95 6 MN828-9687 27.02 19.95 Yellow 4 MN828-9690 23.82 17.95 6 MN828-9691 34.44 25.95 8 MN828-9692 43.56 32.95

Lifting Capacity Lbs. Color Basket Choker Vert. Purple 5200 2100 2600 Green 10,600 4200 5300 Yellow 16,800 6700 8400

Wt. Gray Tan Black Reg. Sale Description Lbs. Model # Model # Model # Price Price 18" Deep 110 MN990-3801 MN990-3802 MN990-3803 $237.17 $199.95 18" Extra Shelf 7 MN990-3804 MN990-3805 MN990-3806 23.11 19.95 24" Deep 130 MN240-5753 MN240-5754 MN422-1649 280.53 249.00 24" Extra Shelf 9 MN240-5755 MN240-5756 MN240-5757 30.81 25.99

Storage Cabinets72H x 36"W

• Rugged, all-steel construction • Three-point locking mechanism • Durable powder-coat fi nish • Four 150 lb. capacity adjustable shelves • Easily assembled

As Low As

$19995

Cabinet Color Model # Gray MN990-3736 Tan MN990-3737 Black MN990-3738

CombinationCabinets

Store Clothing & Supplies Securely in a Single Cabinet.• 3-point locking mechanism with 2 keys• Rugged all-steel construction for a

lifetime of service • Easily assembled • Durable powder-coat fi nish• 36W x 18D x 72"H • Wt.: 115 lbs.Includes: 18" coat rod, full-width top shelf and 4 storage shelves that adjust on 2" centers.

Your Choice


SAVEOVER$40

Heavy-Duty Utility Carts500 Lb. Capacity

Utility Cart

• Easy-reach tool/accessory hooks and storage area • Customize-it fi ttings built-in: add your own wire spools, rolls and more • Sturdy structural foam construction won’t rust, dent, chip or splinter • 5" non-marking gray TPR casters • Ergonomic handle • 2 shelvesUtility• 23⁄4" deep shelf trays keep small items from falling outFlat Shelf• For easy transport of oversized bulky items Overall Dim. Wt. Black Beige Mfr’s Sale W x L x H Lbs. Mfr’s # Model # Model # List Price Utility 17 x 383⁄8 x 323⁄4" 31 4500-88 MN337-0000 MN337-0003 $280.80 $165.00 25 x 437⁄8 x 323⁄4 45 4520-88 MN337-0001 MN337-0004 318.98 185.00 25 x 535⁄8 x 323⁄4 52 4546-00 MN337-0002* MN337-0005* 557.10 379.00 Flat Shelf 17 x 383⁄8 x 321⁄4 42 4505-00 MN337-0006 MN337-0009 301.02 175.00 25 x 437⁄8 x 321⁄4 42 4525-00 MN337-0007 MN337-0010 333.60 195.00 25 x 535⁄8 x 321⁄4 50 4545-00 MN337-0008* MN337-0011* 527.90 359.00*750 lb. capacity

Starting At

$165

SAVEUP TO

42%

Warehouse Desks• 341⁄2W x 30"D sloping writing

surface • 18 gauge desk plate; 14 gauge post

• Large drawer (24W x 28D x 31⁄2"H) with lock and key

• Three compartments above desktop • Gray enamel fi nish • Shipped knocked downWall Desk• Mounts on wall • Wall mount fasteners not includedModel # MN337-1271 Reg. Price $242.63 Sale Price $129.95Foreman’s Desk• Adjustable legs • 43" writing height with under shelf • 53" max. heightModel # MN337-1269 Reg. Price $269.46 Sale Price $159.95

Wall Desk

Foreman’s Desk

Locking Service CartLocking drawer and locking top are keyed the same.• 16W x 351⁄4H x 30"L • 4" wheels—2 locking and 2 standard • Chrome 16 gauge steel frame • 3" deep shelves with friction slides • 350 lbs. load capacity• Wt.: 65 lbs.



e Price

SAVE34%










































http://use-enco.com

http://use-enco.com

Raw Materials The Lowest Prices in the


SAVEUP TO

28%

Stainless Steel Tool Wrap

Reg. Sale Size Model # Price Price Type 321 20" x 50' MN326-1521 $102.90 $95.00 20 x 100 MN326-1520 196.01 189.00 Type 309 20 x 50 MN326-1516 165.42 119.00 20 x 100 MN326-1515 306.34 259.00

• Folds and crease-seals with ease for an airtight envelope for heat treating

• Eliminates decarburization and scales • No special controls or atmosphere furnace required • .002" thicknessType 321–High Titanium• For temperatures up to 1800°FType 309–High-Temperature• For temperatures up to 2100°F

As Low As

$95

SAVEUP TO

55%

15 Pc. Shim Assortments6 x 12" Steel or Brass

15 sizes—1 piece each: .001, .0015, .002, .003, .004, .005, .006, .007, .008, .010, .012, .015, .020, .025 & .031"

Reg. Sale Description Model # Price Price Steel MN406-0288 $42.39 $19.95 Brass MN406-0290 81.04 35.95

As Low As

$1995

SAVEUP TO

50%

• Right-hand thread • Repair lathes,

mills, vises, etc.

Acme Threaded Rod & NutsOil Finish

As Low As

$154

Size & Acme Nuts Sale 3' Lengths Sale 6' Lengths Sale Pitch Model # Price Model # Price Model # Price 3⁄8"-12 MN328-1105 $1.54 MN890-9838 $6.70 MN890-9839 $9.57 1⁄2-10 MN407-2200 1.92 MN408-0200 8.99 MN408-0220 13.39 5⁄8-8 MN407-2202 2.56 MN408-0202 10.53 MN408-0222 24.90 5⁄8-6 MN407-2204 2.76 MN408-0204 14.29 MN408-0224 24.90 3⁄4-6 MN407-2206 2.58 MN408-0206 14.36 MN408-0226 24.00 7⁄8-6 MN407-2208 3.69 MN408-0208 18.40 MN408-0228 28.72 1-5 MN407-2210 4.06 MN408-0210 20.52 MN408-0230 32.39 11⁄8-5 MN407-2212 6.17 MN408-0212 30.04 MN408-0232 52.65 11⁄4-5 MN407-2214 6.44 MN408-0214 42.10 MN408-0234 76.58 11⁄2-4 MN407-2216 14.46 MN408-0216 75.00 MN408-0236 148.59

SAVEUP TO

20%

Acetal Rods4' Lengths

• Easily machined • Makes pump and valve

components, gears & bearings • Wear and moisture resistant • High-tensile strengthNatural—High natural lubricityBlack—Normal lubricity

Natural Reg. Sale Black Reg. Sale Dia. Model # Price Price Model # Price Price 1⁄4" MN240-2568 $2.02 $1.65 MN240-2581 $1.91 $1.79 5⁄16 MN325-4566 2.53 2.14 MN325-4573 2.81 2.41 3⁄8 MN240-2570 3.33 2.74 MN240-2582 3.47 2.79 1⁄2 MN891-6534 4.87 4.59 MN240-2584 5.45 4.99 5⁄8 MN891-6536 7.87 6.91 MN240-2585 8.34 7.29 3⁄4 MN891-6538 9.75 8.25 MN240-2587 10.65 9.29 7⁄8 MN325-4570 14.00 12.45 MN325-4579 15.34 14.09 1 MN891-6540 16.86 14.89 MN240-2589 18.27 16.44 11⁄4 MN891-6542 25.35 22.44 MN240-2591 26.61 24.49 11⁄2 MN891-6544 35.66 31.99 MN240-2593 37.44 33.99 2 MN891-6546 60.25 54.99 MN240-2596 62.38 59.00 21⁄4 MN891-6548 79.14 78.29 MN890-9837 81.73 77.64

Starting At

$165

Reg. Sale Dia. Model # Price Price 1⁄8" MN505-3712 $4.97 $2.98 5⁄32 MN240-2611 8.27 4.96 3⁄16 MN505-3713 9.54 5.72 7⁄32 MN240-2612 11.29 7.95 1⁄4 MN505-3714 12.21 8.95 9⁄32 MN240-2613 14.06 12.95 5⁄16 MN505-3715 17.25 13.95 3⁄8 MN505-3716 24.62 19.69 7⁄16 MN505-3717 31.69 25.95 1⁄2 MN505-3718 40.51 35.95 9⁄16 MN505-3719 47.98 38.49

Reg. Sale Dia. Model # Price Price 5⁄8" MN505-3720 $59.38 $45.95 3⁄4 MN505-3721 79.27 65.95 25⁄32 MN505-3722 81.33 72.95 1 MN505-3723 129.95 109.95 11⁄8 MN505-3724 161.94 139.95 11⁄4 MN505-3725 192.45 175.95 13⁄8 MN505-3726 230.96 207.00 11⁄2 MN505-3727 268.05 239.00 15⁄8 MN505-3728 310.92 279.00 2 MN505-3729 456.80 419.00

Brass Round Rods6' Lengths

• Alloy 360 • Readily soldered

and brazed• Easily machined

As Low As

$298

SAVEUP TO

40%

Drill RodWater & Oil Hardening 3' Lengths

• Fine grain, fully spheroidizedWater Hardening • 100% decarb-free, commercial-grade tool steel • High-carbon content allows

for use without heat treatmentOil Hardening • Non-shrinking tool steel with

excellent abrasion resistanceand machinability

As Low As

$129 Tolerances Water Oil Diameter: 3⁄16 to 11⁄4" 11⁄2 to 2" Section: ±.001" ±.001" Concentricity: .0005" .00075" Length: +1⁄8/.00" +1⁄8/.00"

Water Hard. Reg. Sale Oil Hard. Reg. Sale Dia. Model # Price Price Model # Price Price 1⁄8" — MN408-0005 $2.85 $1.29 3⁄16 — MN408-0009 3.33 1.83 1⁄4 MN409-0013 $6.92 $3.46 MN408-0013 3.34 2.15 5⁄16 MN409-0017 8.76 4.38 MN408-0017 4.96 3.09 3⁄8 MN409-0021 13.58 6.79 MN408-0021 6.97 4.59 7⁄16 MN409-0025 14.83 7.42 MN408-0025 7.81 5.69 1⁄2 MN409-0029 9.32 6.99 MN408-0029 8.55 6.95 5⁄8 MN409-0037 13.56 9.95 MN408-0037 12.75 10.79 3⁄4 MN409-0045 19.11 13.95 MN408-0045 17.80 14.09 7⁄8 MN409-0053 22.91 19.39 MN408-0053 23.74 20.95 1 MN409-0061 31.48 24.95 MN408-0061 31.09 25.69 11⁄8 MN409-0069 33.42 29.95 MN408-0069 38.78 34.89 11⁄4 MN409-0077 41.21 37.09 MN408-0077 46.47 41.79 11⁄2 MN409-0093 54.52 49.07 MN408-0093 63.93 57.54 2 — MN505-0239 100.95 90.89

SAVEUP TO

54%

68-69 HD 15-08 RM.indd 6868-69 HD 15-08 RM.indd 68 7/15/15 8:40 AM7/15/15 8:40 AM













































































































Raw MaterialsIndustry GUARANTEED!


Reg. Sale Pkg. Price Price Dia. Qty. Model # Per Pkg. Per Pkg. Chrome 1⁄16" 100 MN240-2420 $5.28 $3.95 3⁄32 100 MN240-2421 3.93 2.95 1⁄8 100 MN240-2422 2.62 1.95 5⁄32 100 MN240-2423 2.87 1.95 3⁄16 100 MN240-2424 2.91 1.95 7⁄32 100 MN240-2425 3.38 2.79 1⁄4 100 MN240-2426 3.94 2.95 5⁄16 100 MN240-2427 5.18 4.29 3⁄8 100 MN240-2428 8.90 7.39 1⁄2 100 MN240-2429 13.54 10.79 5⁄8 50 MN240-2430 13.94 11.29 3⁄4 25 MN240-2431 10.98 8.95 1 10 MN240-2432 12.67 9.95 2 1 MN240-2433 18.01 14.95 Carbon 1⁄8 500 MN240-2434 2.53 1.49 3⁄16 250 MN240-2435 2.69 1.59 1⁄4 250 MN240-2436 3.96 2.95 5⁄16 250 MN240-2437 6.88 4.95 3 ⁄8 250 MN240-2438 7.25 6.25 1⁄2 100 MN240-2439 10.15 6.95 5⁄8 100 MN240-2440 18.57 12.95 3⁄4 50 MN240-2441 18.89 13.95 1 25 MN240-2442 19.04 13.95

Steel Balls

Chrome• Widely used in precision

ball bearings• Excellent surface quality• Through hardened• High hardness and high

load-bearing capacity

Sold In Package Quantities Noted, Minimum Order = 1 package

SAVEUP TO

41% As Low As

$149 Specifi cations Chrome Carbon Grade: 25 1000 Diameter Deviation: ±.0001" ±.005" Sphericity: .000025" .001" Hardness: 60-67C 60-65C

Reg. Sale ID x OD Model # Price Price 1⁄2 x 1" MN505-3771 $25.75 $22.95 1⁄2 x 11⁄4 MN240-2479 43.00 37.95 1⁄2 x 11⁄2 MN505-3896 60.74 53.95 5⁄8 x 1 MN240-2480 22.54 19.95 5⁄8 x 11⁄4 MN510-1879 38.64 33.95 3⁄4 x 1 MN510-1882 16.15 13.95 3⁄4 x 11⁄4 MN505-3772 34.35 29.95 3⁄4 x 11⁄2 MN240-2475 54.77 48.95

Cored Bronze Rounds13" Lengths

• SAE 660 (CDA 932)• Ideal for general-utility

bearings and bushings• High-quality, rough

machine-fi nished stock Reg. Sale ID x OD Model # Price Price 3⁄4 x 21⁄2" MN510-1874 $139.49 $124.95 7⁄8 x 11⁄4 MN510-1881 30.87 26.95 1 x 11⁄4 MN240-2476 27.74 24.95 1 x 11⁄2 MN505-3773 42.97 37.95 1 x 13⁄4 MN505-3897 68.70 60.95 1 x 2 MN505-3774 87.12 77.95 11⁄4 x 13⁄4 MN240-2477 51.57 45.95 11⁄4 x 2 MN505-3775 81.03 71.95 11⁄4 x 21⁄2 MN510-1883 118.01 105.95 11⁄2 x 2 MN505-3776 62.35 55.95 11⁄2 x 21⁄2 MN240-2478 112.93 100.95 13⁄4 x 21⁄2 MN240-2481 100.82 89.95 2 x 21⁄2 MN240-2482 95.78 85.95 2 x 23⁄4 MN240-2483 117.21 104.95 2 x 3 MN240-2484 139.06 124.95

As Low As

$1395

SAVE10%

Reg. Sale OD Model # Price Price 1⁄2" MN505-3764 $13.41 $10.95 5⁄8 MN505-3765 19.29 15.95 3⁄4 MN505-3766 23.72 19.95 7⁄8 MN505-3898 31.16 25.95 1 MN505-3767 38.27 31.95 11⁄8 MN505-3899 47.72 39.95 11⁄4 MN505-3768 56.02 46.95 13⁄8 MN505-3900 68.54 57.95 11⁄2 MN505-3769 79.34 66.95 13⁄4 MN505-3902 98.07 82.95 2 MN505-3770 123.83 104.95 21⁄4 MN505-3892 151.90 128.95 21⁄2 MN505-3893 188.13 158.95 3 MN505-3894 265.64 224.95 31⁄2 MN505-3903 345.07 292.95

Solid Alloy Bronze Round Rods13" Lengths• SAE 660 (CDA 932)

As Low As

$1095

SAVEUP TO

18%

Permanent Metallic Markers• Opaque, metallic permanent ink writes on most light and dark surfaces • No shaking or pumping needed to get the marker started• Quick-drying, fade- and water-resistant ink• Works well when a detailed line is needed• Silver ink is highly visible on any dark surface • AP certifi ed nontoxic• Medium bullet tip

Reg. Sale Color Model # Price Price Metallic Silver MN414-0806 $1.62 $1.29 Metallic Bronze MN414-0807 2.29 1.69 Metallic Gold MN414-0808 2.29 1.69

As Low As

$129

Shim Punch & Die Set

• Cuts rubber, plastic, brass, and mild steel• Sizes: 1⁄8, 3⁄16, 1⁄4, 5⁄16, 3⁄8, 7⁄16, 1⁄2, 5⁄8 & 3⁄4"• Heat-treated tool steel base• Compact size: 31⁄16 x 39⁄16"

SAVE37%



68-69 HD 15-08 RM.indd 6968-69 HD 15-08 RM.indd 69 7/15/15 8:40 AM7/15/15 8:40 AM


































































http://use-enco.com

Shop Supplies FAST & FRIENDLY Customer


C-Thru® Separator Oil Skimmer

Easy to install with no machine tool modifi cation. This patented transparent oil skimmer is a revolutionary and cost-effective alternative to belt/disc skimmers. • Processes metalworking fl uid at an industry leading

rate of 210 GPH • The compact, injection-molded, seam-free unit holds 3 gallons of fl uid and mounts on the machine tool via a magnet base

• Tramp oil accumulates inside the transparent unit and is visible to the machine tool operator who can easily discard the oil by opening a valve

• Eliminates oily, slick fl oors caused by belt/disc skimmers• Increases fl uid life, decreases waste, and increases tool life• Removes particulate as well as tramp oil • Eliminates good coolant loss experienced with belt/disc skimmers • Eliminates consumables • 40-100˚F temperature range


$459Standard system with Portamist magnetic spray positioner.

Includes: 4" braided nylon coolant hose with anti-syphon check valve, 12" fl exible nozzle, magnetic base, stainless steel tank and 4 oz. Formula “77” concentrated coolant.Mfr’s # 100NF12

1 Gal. Spray Mist Coolant System

Reg. Sale Description Model # Price Price Spray Mist Coolant System MN505-2079 $226.66 $199.99 4" Nylon Coolant Line with Positioner & 12" Loc-Line® MN505-2080 93.57 82.99

ChillyBits™ Cold Air Blasters

Reg. Sale Description cfm Model # Price Price ChillyBits™ Unit 15 MN328-4355 $234.78 $211.95 ChillyBits™ Kit 15 MN328-4352* 275.84 258.95*No air shipment

• Uses no Freon • Magnetic base for easy mounting• Adjustable tip for precision tooling • 80-100 psiKit includes: Unit, stand and fi lter.

EliminatesMist

Cooling

• Blend of nontoxic, biodegradable detergents• Nonfl ammable • Highly concentrated• Approved by the USDA

Industrial Strength Cleaner & DegreaserEnvironmentally Safe with Maximum Cleaning Power

Reg. Sale Description Model # Price Price 32 oz. Spray Bottle MN891-2547 $8.58 $5.99 1 gal. Bottle MN891-2548 15.92 10.99 5 gal. Pail MN891-2549 83.06 49.95

As Low As

$599• Soft PVC ear cushions• Compact, high attenuation• 25 dB NRR • Wt.: 8 oz.• Compliance:

ANSI S3.19-1974

Folding Over-the-Head Earmuffs SAVE

21%



• Removes unwanted oil in coolants and parts washers

• Fan-cooled motor• Engineered polymer

base and housing• 8' grounded power

cord with plug• 3' clear discharge

hose and clamp• Spring-loaded

stabilizer bar• 1" belt width

Li’l Blue Skimmers

ed r

SAVEOVER$25

Your Choice


L Model # 8" MN319-2785 12 MN319-2786 18 MN319-2787 24 MN319-2788

Flood-Type Coolant Systems

• Combine a vertical centrifugal pump, heavy gage steel tank, 4' of Tygon hose, fl exible nozzle and valve

• Production-quality recirculating recovery system• Can be a replacement coolant system or original

equipment on production machinery – bandsaws, drill presses, grinders, cut-off and milling machines

• Equipped with a metal chip recovery system to collect stray metal chips

• 115v, 60 Hz, single-phase thermally protected motors with 6' cord and plug

Tank Use with Reg. Sale Size Cutting Oil L x H x W Model # Price Price 3 Gal. Up to 100 SSU 15 3/4 x 10 x 12" MN296-2030 $138.02 $129.00 10 Gal. Up to 300 SSU 24 x 7 3/4 x 11 3/4 MN296-2060 166.44 149.00 4' Hose Assembly for MN296-2060 MN296-2061 20.77 18.69

As Low As

$1293 Gal.

10 Gal.

70-71 HD 15-08 SS.indd 7070-71 HD 15-08 SS.indd 70 7/15/15 8:41 AM7/15/15 8:41 AM


















Shop SuppliesService 800-USE-ENCO


N95 Particulate Welding Respirator

Recommended for particulates from metal sanding, grinding, soldering and welding. • For use against non-oil

aerosols, nonspecifi c service time

• 3M™ Cool Flow™ valve• M-nose clip• Advanced

electret mediaMfr’s # 8515

PKG. QTY.: 10



Per Pkg.

KEVLAR® protectors have applications in advanced manufacturing, automotive, electrical work, metalworking and meat packing.• Easily laundered with minimal shrinkage• Made with FDA accepted materials for use in food

processing applications• Provides exceptional cut, slash and heat resistance• High level of comfort and dexterity • Elastic opening at both ends• Soft, comfortable knit conforms to the arm• ANSI cut level 4

Cut-Resistant Sleeves

With Thumbhole

KEVLAR® is a registered trademark of E.I. du Pont de Nemours and Company.

Reg. Sale L Model # Price Price Elastic Opening at Both Ends 10" MN404-3061 $2.66 $2.15 12 MN404-3062 2.81 2.27 14 MN404-3063 3.40 2.75 16 MN404-3065 4.19 3.39 18 MN404-3066 3.72 3.09 18 MN404-3067* 5.38 4.02 22 MN404-3070 5.57 4.51 24 MN404-3072 6.15 4.98 Elastic Opening at Both Ends w/Thumbhole 14 MN404-3064 3.60 2.91 18 MN404-3068 4.74 3.79 18 MN404-3069* 5.17 4.18 22 MN404-3071 5.89 4.77*Black

SAVEUP TO

40%Durable against rust. Recommended for steel up to 50 HRC. Comes in a fi tted case. • Includes A-Z, period and 0-8 • 6/9 interchangeable

36 Pc. Machine Made Steel Figure/Letter Sets

Approx. Size Reg. Sale of Character Model # Price Price 1⁄16" MN505-1432 $43.87 $25.99 3⁄32 MN505-1433 43.87 25.99 1⁄8 MN505-1434 43.87 25.99 3⁄16 MN505-1435 55.14 34.99 1⁄4 MN505-1436 64.51 39.95

Starting At

$2599

SAVEUP TO

13%

Mfr’s # 42530

Mfr’s Sale Range Mfr’s # Model # List Price 0 to 600°F 42529 MN307-2938 $79.99 $68.95 -58 to 1000°F 42530 MN307-2936 89.99 78.95

• Large LCD with backlight • Built-in laser pointer to improve aim • Fixed emissivity (.95) covers 90% of

surface applications • Narrow fi eld of view • Audible and visible

overrange indicators • °F/°C switchable • Automatic data hold • 6:1 fi eld of view • Complete with

9V battery • Carrying case

InfraRed Thermometers

As Low As

$6895

Opti-Shield Hose Systems• The 12" long, 1⁄2" Snap-Loc® adjustable arm quickly

adapts to a variety of machine surfaces• 1⁄8" thick polycarbonate shield may be rotated 360˚ • Powerful magnetic base holds fi rmly in position

Reg. Sale Description Model # Price Price 6 x 6" MN505-4003 $39.10 $36.95 12 x 12 MN505-4006 46.70 43.95

As Low As

$3695

Fix Thread Restorer

As simple as a fi le, just pass over & restore face of thread instantly.

Reg. Sale Thread Pitches On Each Model # Price Price 11, 12, 13, 14, 16, 18, 20 and 24 tpi MN990-3074 $11.41 $8.95 9, 10, 12, 16, 20, 27, 28 and 32 tpi MN990-3075 11.76 8.95 .80, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00mm MN990-3076 11.76 8.95 Accessory Black Plastic Handle MN990-3077 .97 —

SAVEUP TO

23%Your Choice

$895

• Flexible spatula temple design for a comfortable fi t during long use

• Strong, yet lightweight, polycarbonate scratch-resistant lens

• Lens is hardcoated and offers 99.9% UV protection

• Compliance: ANSI Z87.1+

Checklite® Safety Glassesy

SAVE25%

On Qty.: 12+

Lens Frame Sale Price Ea. Color Color Model # 1-11 12+ Clear Clear MN328-4568 $1.56 $1.17 Clear Clear MN404-1521* 1.96 1.47 Gray Smoke MN328-4569 1.56 1.17 Light Blue Light Blue MN328-4570 1.94 1.45*Anti-fog lens
































http://use-enco.com

Shop Supplies



SAVEUP TO

30% No. of Extractor Use Drill Reg. Sale Pcs. Size No. Size Model # Price Price 5 #1 - #5 5⁄64 – 19⁄64" MN310-1435 $8.64 $5.99 9 #1 - #9 5⁄64 – 11⁄16 MN619-2197 63.79 45.95

Spiral Flute Screw Extractor Sets

• Left hand spiral, tapered fl ute• Eliminates redrilling and retapping for a larger screw

As Low As

$599

• Bold, permanent marks are wear-, weather-, and fade-resistant

• Excellent on most types of metals, coatings, plastics, glass, ceramics and other nonporous surfaces

• Xylene-free formula• Fast-drying paint does not

spread on oily surfaces• Low chloride/halogen colors

are safe on stainless steel and other alloy metals

• Durable metal barrel and nib

• Easy-to-fl ip cap stores easily in pocket

• -50°F. to 150° F. (-46°C. to 66°C.) marking temperature range

Pro-Line HP® Paint Markers

Color Model # White MN411-0852 Yellow MN411-0853 Red MN411-0854 Black MN411-0855 Orange MN411-0856 Blue MN411-0857 Green MN411-0858 Silver MN411-0859 Light Blue MN411-0860 Light Green MN411-0861 Gold MN411-0862 Pink MN411-0863 Purple MN411-0864 Brown MN411-0865

Sale Price

$329Regular Price: $4.34 Each

Each

SAVEUP TO

38%

Machinery’s Handbook 29th Edition

Reg. Sale Description Model # Price Price Toolbox Handbook MN404-3049 $99.42 $69.99 Large Print Handbook MN404-3050 121.75 85.99 Handbook Guide MN404-3052 16.19 9.99 Toolbox Edition & Guide Set MN404-3055 112.61 79.95 Large Print Edition & Guide Set MN404-3056 129.87 95.95 Pocket Companion MN404-3057 22.28 17.95

By Oberg, Jones, Horton, Ryffel, Green and McCauley. Thoroughly Revised• All standards have been updated• All sections have been updated

and revisedAs Low As

$6999

567™ PST® Thread Sealant

• High-performance curing sealant for tapered metal pipe threads

• Prevents galling on stainless steel, aluminum, Monel, and all other pipe threads and fi ttings

• Immediate low-pressure sealing and cures rapidly to secure and seal fi ttings

• Excellent solvent resistance• Withstands temperatures

to 400°F (204°C)• Not recommended for use

on plastic piping

For stainless steel and all other metal fi ttings.

Reg. Sale Size Model # Price Price

50 ml MN825-8230 $21.85 $17.95 250 MN619-3394 73.52 67.95 350 MN325-5302 102.06 92.95

Starting At

$1795

• Suitable for use with solvents, chemicals, oxygen, and on food lines

• -450-500°F (-268-260°C) sealing temperature range

Heavy-Duty

PTFE Pipe Thread Tape

Price Each W x L Model # 1-9 10+ Standard Grade—Low Density 1⁄2" x 520" MN505-2505 $1.39 $.99 3⁄4 x 260 MN422-2599 1.28 .89 3⁄4 x 520 MN505-2506 2.13 1.69 Heavy-Duty Grade—High Density 1⁄2 x 300 MN422-2601 2.68 2.29 1⁄2 x 600 MN422-2602 3.82 3.39 1⁄2 x 1200 MN422-2603 6.56 5.99 3⁄4 x 300 MN422-2604 4.38 3.99

Standard

,

SAVEUP TO

31%

SAVEUP TO

40%

Hose Reg. Sale L Model # Price Price 25' MN327-7398 $134.97 $89.95 50 MN327-7399 175.58 119.95

• 3⁄8" ID • Steel construction,

corrosion-resistant powder coating

• Solid 1" steel center support shaft

• Full-fl ow solid brass swivel joint

• Multi-position release ratchet; spring fully enclosed and lubricated

• Wall, ceiling or fl oor mounted

• 300 max. psi • Includes hose

Spring Retractable Hose Reels

As Low As

$8995

1-YEARWARRANTY

Magnifi cation Model # 1.5x MN414-1779 2.0 MN414-1780 2.5 MN414-1781

Your Choice


Each

Magnifying Safety GlassesMag Reader Bifocals

• Ready-to-wear magnifi ers with complete protection

• 30mm “curve top” bifocal lens for a wider reading fi eld of vision

• Durable nylon frame with extra-wide bridge pads and soft temple pads

• Clear lens • Black frame • ANSI Z87.1+ compliant







































Shop SuppliesOnline at use-enco.com


SAVEUP TO

20%Threadlockers

222MS™ Threadlocker, Low Strength/Purple• Locks and seals screws242® Threadlocker, Medium Strength/Removable/Blue• Locks and seals nuts, bolts, screws, fi ttings262™ Threadlocker, Permanent Strength/Red• Heavy-duty use on bolts and studs271™ Threadlocker, High Strength/Red• Locks and seals plugs, bolts, and nuts290™ Threadlocker, Wicking Grade/Green• Locks and seals pre-assembled fasteners to

eliminate vibration and corrosion

Reg. Sale Description Size Model # Price Price 222MS™ 10ml MN505-2681 $13.51 $11.95 Threadlocker 50 MN825-8200 38.40 32.00 250 MN505-2682 151.46 129.00 242® 10 MN825-8205 14.57 11.95 Threadlocker 50 MN825-8210 40.59 34.50 250 MN505-2673 151.46 125.00 262™ 10 MN505-2674 13.88 12.49 Threadlocker 50 MN505-2675 38.40 32.00 250 MN505-2676 151.46 129.00 271™ 10 MN825-8215 14.57 11.59 Threadlocker 50 MN825-8220 40.59 35.00 250 MN505-2672 151.46 125.00 290™ 10 MN505-2677 13.88 11.49 Threadlocker 50 MN825-8225 38.40 32.95 250 MN505-2678 151.46 118.95

As Low As

$1149

Ideal for wet environments, or when heavy debris is a concern.• Large drainage holes facilitate

drainage and resist clogging• Natural/SBR rubber • Safety beveled on

all four sides• 1⁄2" thickness • Slip resistant

Anti-Fatigue MattingLarge Drainage Holes

Low Size Model # Price 3 x 5' MN328-5967 $55.00 3 x 10 MN328-5966 95.00

Starting At

$55

The Original Troubleshooter Lubricant

• Lubricates, cleans, protects and displaces moisture• Removes grease and road tar • Will not harm paints, plastics, rubbers or fabrics • Does not contain silicones

As Low As

$599

Reg. Sale Description Model # Price Price 16 oz. Aerosol* MN505-1184 $6.55 $5.99 1 gal. Can MN505-1186 22.10 19.99 5 gal. Pail MN505-1187 99.59 95.95 Empty Spray Applicator MN422-1623 4.58 3.99*No Air Shipment

SAVE22%

Safety Pistol Air GunFixed Angle Nozzle with Side Hole

Regular-Duty• 1⁄4" tip diameter• 4" tube length • 1⁄4" npt female brass

thread connection • -40 to 176°F

temperature range • 160 psi max. working

pressure • Lightweight, thin-walled

aluminum tubing



SAVEOVER

20%

Reg. Sale Length Model # Price Price 15' MN505-0742 $38.40 $29.95 25 MN505-0743 46.93 36.95

Polyurethane Self-Storing Air Gun Sets• Pigtails eliminate the

need for whip hoses • Swivel fi tting on both ends • 1⁄4" hose ID x 1⁄4" swivel MPT • Include hose plus air gun

X50 Wipers

Good for applying lubricants, vehicle and equipment cleaning and low-lint glass cleaning.• Nylon-reinforced for strength and tear

resistance• Durable wet and dry • Sheet size: 9.8W x 13.4"L • 1100 sheets per roll • White

Jumbo Roll



SAVE33%



























http://use-enco.com

http://use-enco.com

Shop Supplies Easy, Secure Shopping




Razor Edged™ Shears

• Good for cutting heavy cardboards, rubber, light rope, upholstery, layers of fabric, etc.

• Lightweight• High grade stainless steel blades • Ergonomic, ambidextrous, bent

contoured plastic handles• 913⁄16" OAL • 33⁄4" LOC

• Use on heavy metals, stainless steel, iron, copper, brass, nickel, tin and lead

• Special acid solution fl ows like ink in a felt-tip pen

• No electrical fl ux necessary• Leaves distinctive,

smudge-proof, black markings

ChemicalEtching Pen

SAVE10%



Unlined Driver’s GlovesTop Grain Cowhide Select GradeStraight Thumb – Thumb that normally lies straight with the index fi nger.Keystone Thumb – Type of insert thumb on full-leather glove patterns. Provides additional wear and greater comfort.

Straight Thumb

Keystone Thumb

Price Per Pair Size Model # 1-11 12+ Straight Thumb Small MN325-1849 $7.48 $5.25 Medium MN505-4103 7.48 5.25 Large MN505-4104 7.48 5.25 X-Large MN505-4105 7.48 5.25 Keystone Thumb Small MN327-6956 8.78 5.99 Medium MN327-6952 8.78 5.99 Large MN327-6949 8.78 5.99 X-Large MN327-6951 8.78 5.99

As Low As

$525

• For use in hard-to-reach areas• Angle head allows easy access

under machinery• Comfortable plastic grip• Permanent magnet• Non-corrective construction• Max. pull: 47.5 lbs.

38" MagneticRetriever

areas

SAVE50%



AA Mini Mag-Lite Holster ComboThe Most Versatile, Reliable Flashlight Around• 53⁄4" length • 2200 candlepower• Black woven fabric belt

holster, two AA batteries and spare bulb in the tail cap are included

Color Model # Black MN505-4220 Red MN505-4221 Blue MN505-4222

Your Choice


Reusable Low-Melting Fixturing Alloy1 Lb. Pkg.

Contains no Class 1 ozone-depleting chemicals.• For supporting thin-walled sections

which require machining• 158°F melting temperatureApplications:• Drop hammer for short-run, sheet-metal forming• Locator members in aircraft and automotive assembly, drill,

inspection and welding fi xtures• Spinning metal into re-entrant or bottleneck shapes• Holding irregular-shaped workpieces during machining

SAVE40%



SAE Diameter Reg. Sale Size Min. Max. Model # Price Price 6 3⁄8" 7/8" MN505-0581 $.96 $.72 8 7⁄16 1 MN505-0582 .96 .72 10 9⁄16 11⁄16 MN505-0583 .96 .72 12 9⁄16 11⁄4 MN505-0584 .97 .72 16 11⁄16 11⁄2 MN505-0585 .97 .72 20 3⁄4 13⁄4 MN505-0586 1.01 .75 24 11⁄16 2 MN505-0587 1.01 .75 28 15⁄16 21⁄4 MN325-7072 1.01 .75 32 19⁄16 21⁄2 MN505-0588 1.01 .75 36 113⁄16 23⁄4 MN325-7073 1.02 .76 40 21⁄16 3 MN325-7075 1.16 .87 44 25⁄16 31⁄4 MN325-7076 1.41 .95 48 29⁄16 31⁄2 MN505-0589 1.36 .95 52 213⁄16 33⁄4 MN317-7293 1.45 .95 56 31⁄16 4 MN317-7294 1.45 .95 60 35⁄16 41⁄4 MN317-7295 1.52 .95 64 21⁄2 41⁄2 MN317-7296 1.51 .95 72 3 5 MN317-7297 1.61 .95 80 31⁄2 51⁄2 MN317-7298 1.72 .95 88 41⁄16 6 MN317-7299 1.93 .95 96 41⁄2 61⁄2 MN317-7300 1.95 .95 104 5 7 MN505-0590 1.97 .95

• One piece housing design• Provide uniform and high strength

clamping force• Clamp seals hose 360° to prevent leakage• Corrosion and chemical resistant• 1⁄2" band, 301 SS• 301 SS housing• Screw: 5⁄16" hex head, 305 SS

Stainless Steel Worm Drive Clamps

As Low As

72¢







































Shop SuppliesOnline at use-enco.com


SAVEUP TO

25%

Fixed Height Shop Stools

Reg. Sale Height Model # Price Price 18" MN326-1418 $43.12 $33.95 24 MN990-3610 45.29 35.95 30 MN990-3611 48.18 35.95

• 7⁄8" OD 18-gauge steel tubing • 5⁄8" OD foot rings are welded by 4 contact points at each leg• Weight capacity: 300 lbs.

As Low As

$3395

SAVE23%

Mfr’s Sale Nozzle Mfr’s # Model # List Price 12" 60M12 MN505-1982 $117.00 $89.95 18 60M18 MN505-1984 139.00 106.95

Portamist Spray Mist Coolant SystemsFor Fast Setups• 12" or 18" fl exible Loc-Line® with

adjustable spray nozzle • Base-mounted air/coolant

control valve • 4' coolant hose with

anti-syphon check valve• 4' air hose with

male pipe thread fi tting

Starting At

$8995

SAVEUP TO

34%

Blue Red Reg. Sale Container Size Model # Model # Price Price 2 oz. Felt Tip Applicator MN 505-1392 MN505-1391 $6.04 $3.99 4 oz. Can w/Cap Brush MN825-8310 MN505-1393 7.17 5.09 8 oz. Can w/Cap Brush MN825-8320 MN825-8350 8.24 6.59 16 oz. Aerosol MN825-8300 MN825-8340 11.61 7.89 31.4 oz. Jug MN505-1386 MN505-1395 18.02 11.89

• Prevents glare with uniform, deep color• Dries in two to four minutes• Scribes sharp, clear

precise lines

Blue/Red Layout Fluid Layout Fluid Remover• Removes layout fl uid and

staining colors • Removes oil, grease and dirt

from metals and plastics• Use to dilute layout fl uid • Contains no Class 1

ozone-depleting chemicals • 16 oz.; net fi ll 12 oz. • Case qty.: 12

As Low As

$399Sale Price

Model # MN505-1390

$729On 12+

Sale Price Each 1-11: $8.29

Kit contains: Dash# Quantity 006 thru 012 20 110 thru 116 13 210 thru 222 10 325 thru 327 7

382 Pc. Buna-N O-Ring Kit

Supplied in a plastic case



t

SAVEOVER

30%

SAVEUP TO

20%

Reg. Sale Grade Model # Price Price Economy MN505-3927 $5.10 $4.29 Premium MN505-3926 7.52 5.95

As Low As

$429

• Sturdy, long-lasting 100% blue cotton

• One size fi ts all • Economy grade includes

waist pocket; 35"L• Premium grade includes chest

pocket w/pen holder; 36"L

Denim Shop Aprons

Contains No Class 1 Ozone-Depleting ChemicalsOne Gallon Makes 33 Gallons Formula “77” for Tougher Service Mist & Flood Cooling• Recommended where tougher machining

conditions require greater lubricity• Particularly useful where the material is very abrasiveFormula “78” Synthetic Mist Coolant for Light Duty • For high-effi ciency cutting of exotic metals and alloys

such as Monel, Inconel, titanium and nonferrous metals• Dissolves in water to a clear solution

Container Case Mfr’s Sale Size Qty. Model # List Price Formula 77 1 gal. 4 MN505-2076 $38.00 $28.95 5 gal. Pail 1 MN505-2077 185.00 139.95 Formula 78 1 gal. 4 MN505-2074 36.00 27.95 5 gal. Pail 1 MN505-2075 178.00 135.95

Formula 77 & 78 Concentrated Coolants

As Low As

$2795

Cherry Red is a compound of dry, powdered materials used to surface harden steels quickly and easily.• Simple, easy and effective means of quick-hardening

tools and parts• Widely used in industry to case harden mild, lower-cost

steels, as well as tool steels and other modern steel alloys• Used to harden dies, molds, jigs, punches, gouges,

broaches, draw pins, wear plates, fi xtures and more• No special equipment required• Does not contain cyanide• Nonfl ammable• Fast acting; case hardening

takes only minutes

Size Reg. Sale Lbs. Model # Price Price 1 MN328-1122 $29.72 $22.95 5 MN328-1124 109.73 85.95 10 MN328-1123 203.57 158.95

Cherry Red Surface-Hardening CompoundsPerfect for field locations, short-run jobs, maintenance areas, heavy industry, utilities, small shops & blacksmiths!

As Low As

$2295



























http://use-enco.com

http://use-enco.com


It’s IN STOCK and


Electrical/HVAC

Electrical Test KitIncludes:• Extech 430: True rms

digital multimeter with 11 functions

• MA200: 400A AC clamp-on meter

• Non-contact AC voltage detector

• Set of CAT III-1000v test leads

• Type K thermocouple bead probe

• Type K to banana input adapter

• Carrying case with handle


$9295Mfr’s List: $119.99

SAVE22%

• All-weather, all-condition lightweight yellow T-prene insulated cords

• Remains fl exible, even in the most extreme conditions (to –70˚C)

• Resists oil, acids and solvents • SJEOW wire type • 3 conductor • Meets OSHA requirements

for outdoor use • 300V max. voltage

Polar/Solar® Extension Cords

Wire 125V Reg. Sale Ga. Length Rating Model # Price Price 16 25' 13A MN990-3175 $26.01 $19.95 16 50 13A MN990-3176 43.58 33.95 16 100 10A MN990-3177 75.02 59.95 14 25 15A MN990-3178 28.33 21.95 14 50 15A MN990-3179 46.97 36.95 14 100 13A MN990-3180 91.07 71.95 12 25 15A MN325-5864 40.00 31.95 12 50 15A MN325-5865 69.14 54.95 12 100 15A MN325-5866 125.81 99.95

Power indicator light in female plug

Starting At

$1995

Noncontact Circuit Reg. Sale AC Voltage Frequency CAT Mfr’s # Model # Price Price 100v to 600v AC 50/60 Hz III-600v DV20 MN337-1278 $13.59 $9.95 50v to 1000v AC 50/500Hz IV-1000v DV24 MN337-1279 14.83 10.95

SAVE26%

Electrical Receptacle Tester• Tests reserved/open connections• Tests GFCI circuits• Tests for faulty wiring in 3-wire receptacles• Detects 5 wiring faultsMfr’s # ET10

Pen Style Noncontact AC Voltage Detectors• Insulated tip suitable for checking live

conductors or “hot side” of AC outlet• Rugged, double molded housing• Built-in bright LED fl ashlight• Red LED light indicator

Voltage & Electrical Testers



Fluorescent Desk Lights

• 11" head diameter• Polycarbonate plastic shade with

120v PL 13 watt energy saving compact fl uorescent tube

• Lamp included • 5' cord length

Swing Arm• 42" reach• Clamp-on base• Integrated ballast

Gooseneck Arm• Hook/clamp/spike/fl oor base• 25" reach





SAVEOVER

25%• Flexible gooseneck style arm

• Easy to move for machining jobs

• Uses a standard 60 watt bulb (not included)



Incandescent Magnetic Base Work Light

MN328-5478

Compact Fluorescent Task Lights

• 23 watt Energy Star rated compact fl uorescent lamp (included)

• Mounting hardware for coupler base included• Double-wall shade design stays cool to the touch• 6' cord with grounded plug • Color: Black • 24" reach

Reg. Sale Description Model # Price Price Adjustable Clamp-On Base Task Light MN328-5478 $83.69 $65.95 Coupler Base Task Light MN328-5476 77.23 59.95 Direct Mount Task Light MN328-5479 72.56 55.95 Magnetic Base Task Light MN328-5477 83.69 65.95 23W Compact Fluorescent Lamp (Pkg. 2) MN328-5475 20.23 15.95

As Low As

$5595

SAVEUP TO

22%

76-77 HD 15-08 Elec_HVAC.indd 7676-77 HD 15-08 Elec_HVAC.indd 76 7/15/15 8:45 AM7/15/15 8:45 AM






















READY TO SHIP!


Electrical/HVAC

SAVE38%Cordless LED

Magnetic Light Bar• Energy-effi cient bright white light • Magnetic back attaches to any

ferrous surface • Built-in hook allows use at any angle • Multi-purpose lights for use around

home, garage or workshop • 72 LED • 4 AA batteries (not included)



SAVEUP TO

17%Waterproof Fluorescent Machine Lights

• 4100K white rough service lamp • Remote ballast

Ideal for Most Machine & Industrial Environments

13 Watt• 11" length • 23⁄4" shatter-resistant Lexan outer case • 10' oil- and weather-resistant 16-gauge,

3-wire cord with grounded plug• Meets OSHA requirements • Mounting hardware includedModel # MN510-0735Reg. Price $150.08 Sale Price $129.95

2-Pack Nylon Grip Magnetic MountModel # MN510-0750Reg. Price $27.96 Sale Price $22.95

55 Watt• 24" length • Rated to waterproof IP65• Polycarbonate casing is virtually indestructible

in most industrial environments • 10' cordModel # MN510-0732Reg. Price $203.72 Sale Price $179.95

13 Watt

55 Watt

Reg. Sale Description Model # Price Price Clamp-On Base MN411-1335 $218.03 $145.00 Magnetic Base (No air shipment) MN411-1336 222.92 145.00

LED Machine Lights

Clamp-On Base

• Compact, cool-to-touch 3" dia. metal shade • Screw clamp or powerful magnet with

90 lbs. pull strength • 25" reach fl exible steel gooseneck • On/off switch, 8' grounded cord • 35,000-hour bulb life • Consumes 1⁄4 the energy

of a halogen bulb • Lamp included

g

WithstandsHeavy

MachineVibration!d cord

SAVEUP TO

35%Magnetic

Base

SAVE15%

18" Magnetic Mount Gooseneck Work Light• Rugged, all-metal construction• White-shade interior fi nish provides

optimum light output• Porcelain socket with on/off switch• 9' grounded cord • Uses 100 watt incandescent bulb

(not included)



• Cordless rechargeable unit with AC/DC charging adapters included

• Nine LED lights on end of light doubles as a spotlight/fl ashlight • 120v AC/DC

• 360° rotating swivel hook• Durable plastic construction

with polycarbonate lens• Cushioned grip with

instant-ON switch • Magnetic clamp• Up to 12 hours of

battery life (when used only as a fl ashlight)

SAVEOVER

30%

35 LED Hand Work Light












http://use-enco.com



Electrical/HVAC

Reg. Sale Color Model # Price Price Cooling Bandana Navy MN505-4152 $3.66 $2.95 Cowboy Red MN505-4151 3.66 2.95 Blue Denim MN505-4153 3.66 2.95 Cowboy Blue MN327-7020 3.66 2.95 Khaki MN327-7030 3.66 2.95 Wavy Flag MN327-7034 3.66 2.95 Desert Flag MN327-7033 3.66 2.95 Cooling Headband—Tie Closure Wavy Flag MN327-7031 5.36 3.95 Navy MN327-7032 5.36 3.95 Cooling Cotton Khaki Ranger Hat Medium MN327-7024 18.77 12.95 Large MN327-7021 18.77 12.95 X-Large MN327-7022 18.77 12.95 Cooling Tie Hat Cowboy Red MN891-6510 12.20 7.95 Navy MN891-6511 12.20 7.95 Cooling Hard Hat Pad Blue Denim MN505-4157 6.05 3.95

• Absorbs and holds cool, refreshing water • Just soak in cold water for 30 minutes • Works without freezing or ice• Stays hydrated for several days • Reduces heat stress and fatigue• Reusable thousands of times

Navy Cowboy Blue

Cowboy Red

Khaki Wavy Flag

Desert Flag

Blue Denim

Cooling Crystals

Bandana Tie Hat Ranger HatHeadband Hard Hat Pad

Starting At

$295

Portable Water Coolers

• OSHA compliant • UV- and impact-resistant HDPE exteriors • FDA grade, stain-resistant,

easy cleaning liners • Flow spout

Reg. Sale Cap. Model # Price Price 2 gal. MN505-4183 $30.74 $26.95 3 MN505-4184 40.17 35.95 5 MN505-4185 46.04 40.95 10 MN505-4186 73.31 65.95

As Low As

$2695

Single Laser Infrared Thermometer• IP54 rated for dust and water resistance • 3-meter (9.8') drop tested • Large, backlit display • Min./Max./Avg./Dif.• Hi and Lo alarms • Temperature range: -30˚ to 500˚C (-22˚ to 932˚F)• Response time: <500 ms (95% of reading)• Optical resolution: 10:1 (calculated at 90% energy)• Display resolution: 0.1˚C (0.2˚F) • Repeatability of readings• Powered by a single AA battery (10-hour life with laser and backlight on)Mfr’s # FLUKE-62MAX


$9595

Low Description Type Speeds Model # Price Oscillating 12" Table Fan 3 MN990-3851 $23.00 Oscillating 16" Table Fan 3 MN990-3852 27.00 Super Grip Clip 6" Clip Fan 2 MN990-3853 15.00

Personal FansStarting At

$15

Starting At

$895

Catamount® Cable TiesFor Wire Bundling, Fastening & General Purpose

• Natural nylon for indoor applications• Black weather-resistant nylon for

outdoor applications• Multi-colored ties are

mil-spec approved. Include 100 each of blue, orange, green, pink and yellow

• 50 lb. strength • 3" max. bundle dia.

Jar Assorted Reg. Sale Qty. Lengths Model # Price Price Natural 650 4, 7, 11" MN307-1832 $11.37 $8.95 Black 650 4, 7, 11 MN307-1833 14.47 9.95 Multi-Colored 500 4, 7 MN411-0084 11.40 8.95

SAVEUP TO

31%

Pkg. Reg. Sale Price Per Pkg. Type Qty. Model # Price 1-5 6+ AAA 4 MN327-7120 $4.70 $4.23 $3.68 AAA 12 MN327-7116 11.22 10.09 8.78 AA 4 MN327-7121 4.47 4.02 3.50 AA 12 MN327-7115 11.22 10.09 8.78 C 2 MN327-7124 4.58 4.12 3.58 C 8 MN327-7119 14.10 12.69 11.04 D 2 MN327-7123 5.23 4.70 4.09 D 8 MN327-7117 14.10 12.69 11.04 9V 2 MN327-7122 8.73 7.85 6.83 9V 4 MN327-7118 15.26 13.73 11.95

Max® Alkaline Batteries Environmentally Responsible –No Added Mercury

Long-lasting performance in the broadest range of applications.

Sold in Pkg. Qty. Only








































Electrical/HVAC

20" Contractor GradePedestal Fan• 3-blade impact- and chemical-resistant

polypropylene propeller• 3-speed rotary switch mounted

on rear motor cover• 5', 3-prong grounded cord • Front steel fan guard snaps

into plastic rear grill, no clips required

• Tubular steel stand with round base

• Easy to assemble • ETL certifi cate• 4590/3530/2825 cfm • 1⁄3 hp • 120v



FREEPLUS

Industrial Floor Fans• 3-speed, 1-phase, 120v motor • 10' long, SJT-type, 3-conductor cord • All-metal construction • Chrome-plated, double-locking steel wire guards• Fan rotates 360° for multi-directional use

Blade Reg. Sale Size hp cfm Model # Price Price 12" 1⁄12 1600/2200/2750 MN890-9977 $108.90 $79.00 18 1⁄8 3200/4700/5750 MN890-9978 119.00 89.00 24 1⁄8 3600/5200/6350 MN890-9979 202.66 145.00


Starting At

$79

SAVEUP TO

28%

FREEPLUS

• Durable steel construction provides high-volume air movement and powerful air delivery

• Sensitive cutoff protects from overheating • Easy to install • Balanced blades for smooth,

quiet operation • 120V

Blade Max. Reg. Sale Size HP CFM RPM Model # Price Price 20" 1⁄3 6,039 1,500 MN411-0119 $113.03 $95.00 24 1⁄3 7,530 1,630 MN411-0118 155.02 139.00 30 1⁄4 6,145 1,050 MN411-0117 197.69 169.00

As Low As

$95FREEPLUS

Light-Duty 3-Speed Wall-Mounted FansIdeal for Industrial Use

• Rolls easily on two 5" wheels • Head tilts 360° • 3-speed, rotary switch,

1-phase, 120v, 1⁄8 hp, sleeve-bearing, permanently lubricated, totally enclosed motor

• 10' cord • 53" overall height• Steel hub/spider and aluminum blades• Double-locking, chrome-plated guards • 1-year warranty

Roll-About Floor Fans

Blade cfm Wt. Reg. Sale Size Hi/Med./Low Lbs. Model # Price Price 18" 5750/4700/3200 27 MN325-7337 $175.08 $125.00 24 6350/5200/3600 30 MN325-7357 239.97 169.00

Starting At

$125

SAVEUP TO

29%

FREEPLUS

18" Light-Duty Floor Fan

• Fan head can be rotated 360° for multi-directional use

• Powerful 3-speed motor • Impact-resistant black metal fan blade • 120V/60 Hz • 1⁄4 HP• 5686 CFM• 1425 max. RPM

Provides multi-speed, high-volume air circulation for cooling offi ces, homes, stores & factories!

FREEPLUS

SAVEOVER

25%














http://use-enco.com

http://use-enco.com

400 Nevada Pacifi c Hwy., Fernley, NV 89408 PRSRT STDU.S. Postage

PAIDEnco

MN12

0-1" IP65 Electronic Coolant-Proof Micrometer

Two Measuring Modes—Absolute and Incremental• Carbide measuring face • Inch/metric• Ratchet thimble • Resolution: .00005"• Accuracy: .00016"

Certifi cate of calibration traceable to NIST included.• IP65 waterproof rating

protects against dust and water

• Includes fi tted case

BONUSImport MicrometerStand ($24 Value)

Included





115 Pc. 3-In-1 HSS Black Oxide Jobber Drill Set

• Sizes: 1⁄16-1⁄2" by 64ths, 1-60, A-Z• 118° point • Steel index case

SAVEOVER

10% Set Shown with Extra Blades

HSS Replacement Blades

Twist-A-Burr Sets & Replacement Blades

Sets

Model E Set Includes: Plastic handle, blade holder and one each of E100, E200, E300 blades.

Model B Set Includes: Plastic handle, blade holder and one each of B10 and B20 blades.

Blades Sold in Packs of

10 Only

Price Each Uses Mfr’s # Model # 1-49 50-99 100+ For steel B10 MN380-0321 $1.90 $1.25 $.99 & aluminum E100 MN380-0383 2.85 1.85 1.45 For brass B20 MN380-0323 2.05 1.35 1.09 & cast iron E200 MN380-0384 2.77 1.85 1.45 For tubing & sheet metal E300 MN380-0385 2.77 1.85 1.45

Reg. Sale Sets Model # Price Price Model B MN380-0310 $12.34 $8.95 Model E MN380-0370 16.46 12.95

Use your eyes and ears to fi nd the edge.• Single-end type

Audible Edge Finders

Shank Head Reg. Sale Dia. Dia. Model # Price Price 3⁄8" .2" MN891-4719 $15.64 $13.95 1⁄2 .2 MN891-4720 16.10 14.49 1⁄2 .5 MN891-4721 16.10 14.49

As Low As

$1395

Non-Marring Brass HammersWith Hickory Handle

• Solid brass hammers will not mar steel and iron surfaces

• Machine-turned heads are securely brass-pinned to tough, quality hickory handles

• 101⁄2" OAL

Starting At

$1495

Head Face Reg. Sale Wt. Dia. Model # Price Price 8 oz. 3⁄4" MN240-2087 $17.30 $14.95 8 1 MN240-2088 17.30 14.95 16 11⁄4 MN240-2089 20.36 17.95 32 11⁄2 MN240-2090 30.53 26.95

01-80_ HD 15-08_Cover.indd 101-80_ HD 15-08_Cover.indd 1 7/15/15 7:58 AM7/15/15 7:58 AM

















http://www.use-enco.com

enco august hot deals

Documents