enclosures and cable entry system · 2020. 3. 1. · enclosures and cable entry system for info:...
TRANSCRIPT
ENCLOSURES AND CABLE ENTRY SYSTEM
For Info: Switches Unlimited � [email protected] � www.switchesunlimited.com � Phone: 800-221-0487 � Fax: 718-672-6370
CONTENTSEnclosing SolutionsNon-metallic S Series enclosures, type 4, 4X, 6, 12 and 13 Sizes 2.95 x 4.92 x 1.38 to 6.89 x 9.84 x 5.91 inch with plain sides, or with metric/Pg knockouts . . . . . . . . . . . . . . . . . . . . 4
Non-metallic D Series enclosures, type 4, 4X, 6, 12 and 13 Sizes 2.09 x 2.17 x 1.42 to 9.06 x 11.81 x 4.37 inch with plain sides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Pushbutton Enclosures, type 4, 4X, 12 and 13 Sizes 3.2 x 3.1 x 3.4 to 7.9 x 4.7 x 3.4 inch with plain sides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Non-metallic O Series enclosures, type 4, 4X, 12 and 13 Sizes 7.87 x 7.87 x 5.20 to 15.75 x 23.62 x 7.36 inch with plain sides, or with metric knockouts . . . . . . . . . . . . . . . . . . . . . . . 8
Non-metallic W Series wall cabinets, type 4, 4X, 12 and 13 Sizes 7.87 x 7.87 x 5.20 to 15.75 x 23.62 x 7.36 inch with plain sides, and pre-assembled hinges and quick release latches . . . . . . 9
Fiberglass N Series wall cabinets, type 4, 4X and 12 Sizes 9.84 x 11.81 x 5.51 to 23.62 x 31.50 x 11.81 inch with plain sides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Explosion Protection SolutionsHazardous location enclosures Size ranges 5.91 x 5.91 x 3.54 to 39.37 x 59.06 x 23.62 inch Type 4X, 12, 13 and NEMA 4X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
KDSCLICK Cable Entry SystemsOverview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Frames
KDS-SR 1-4, KDS-SR 6/10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
KDS-SR 8/16, KDS-SR 10/24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Cable Glands
KDS-KV (small and large versions). . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
www.contaclipinc.com 3Switches [email protected] 800-221-0487 � Fax: 718-672-6370www.switchesunlimited.com
Series S features:• Available with plain sides or knockouts (metric or Pg)
• Available in 36 sizes, two base depths (0.98 and 1.97 in) and 5 different cover lengths
• Cover and cover screws equipped with sealing holes
• Slots in the base for printed circuit boards
Contents of the product package: • Enclosure base
• Cover
• Cover screws
• Mounting screws
ConformityPolycarbonate enclosures:
Technical informationUL category: NITW, NITW7Environmental type (UL): 4, 4X, 12, 13, 6Environmental type (cUL): 4, 4X, 12, 6Outdoor suitability: UL 746C (f1) rated materialOperating temperature: -40 °F... 176 °F (-40 °C... +80 °C)Short term temperature range: -40 °F... 248 °F (-40 °C... +120 °C)Flammability rating: UL 746CDegree of protection: IP66 and IP67Impact resistance: IK08 (-13 °F... 95 °F / -25 °C... +35 °C)Insulation: Class IIMaterialBase: Fiberglass reinforced polycarbonateCover: PolycarbonateCover screws: Fiberglass reinforced polyamideGasket: PUR (polyurethane)Enclosure side typesPolycarbonate enclosures: Plain sides, metric knockouts or Pg knockoutsStandard colorBase: Gray RAL 7035Cover: Gray RAL 7035 or transparent
Series S Enclosures Type 4, 4X, 6, 12 and 13Sizes 4.92 x 2.95 x 1.37 to 9.84 x 6.88 x 5.90 inch
Lengthinch
(mm)
Widthinch
(mm)
Depthinch
(mm)
Inner depthinch
(mm)
Base depthinch
(mm)
Cover depthinch
(mm)
Polycarbonate grey cover
Polycarbonate transparent cover
Polycarbonategrey cover
metric knockouts
Polycarbonatetransparent covermetric knockouts
Polycarbonategrey cover
Pg knockouts
Polycarbonatetransparent cover
Pg knockouts
4.92 (125)
2.95(75)
1.37 (35)
0.80 (20.5)
0.98 (25)
0.39 (10)
41000.1 41001.1
4.92 (125)
2.95(75)
1.96(50)
1.39 (35.5)
0.98 (25)
0.98 (25)
41002.1 41003.1
4.92 (125)
2.95(75)
2.36 (60)
1.79 (45.5)
1.96(50)
0.39 (10)
41004.1 41005.1 42000.1 (1 42001.1 (1 43000.1 (7 43001.1 (7
4.92 (125)
2.95(75)
2.95(75)
2.38 (60.5)
0.98 (25)
1.96(50)
41006.1 41007.1
4.92 (125)
2.95(75)
2.95(75)
2.38 (60.5)
1.96(50)
0.98 (25)
41008.1 41009.1 42002.1 (1 42003.1 (1 43002.1 (7 43003.1 (7
4.92 (125)
2.95(75)
3.93 (100)
3.36 (85.5)
0.98 (25)
2.95(75)
41010.1 41011.1
4.92 (125)
2.95(75)
3.93 (100)
3.36 (85.5)
1.96(50)
1.96(50)
41012.1 41013.1 42004.1 (1 42005.1 (1 43004.1 (7 43005.1 (7
4.92 (125)
2.95(75)
4.92 (125)
4.35 (110.5)
1.96(50)
2.95(75)
41014.1 41015.1 42006.1 (1 42007.1 (1 43006.1 (7 43007.1 (7
3.93 (100)
3.93 (100)
1.37 (35)
0.80 (20.5)
0.98 (25)
0.39 (10)
41016.1 41017.1
3.93 (100)
3.93 (100)
2.36 (60)
1.79 (45.5)
1.96(50)
0.39 (10)
41018.1 41019.1 42008.1 (2 42009.1 (2
4.92(125)
4.92(125)
1.37 (35)
0.80 (20.5)
0.98 (25)
0.39 (10)
41020.1 41021.1
4.92(125)
4.92(125)
1.96(50)
1.39 (35.5)
0.98 (25)
0.98 (25)
41022.1 41023.1
4.92(125)
4.92(125)
2.36 (60)
1.79 (45.5)
1.96(50)
0.39 (10)
41024.1 41025.1 42010.1 (3 42011.1 (3 43010.1 (8 43011.1 (8
4.92(125)
4.92(125)
2.95(75)
2.38 (60.5)
0.98 (25)
1.96(50)
41026.1 41027.1
4.92(125)
4.92(125)
2.95(75)
2.38 (60.5)
1.96(50)
0.98 (25)
41028.1 41029.1 42012.1 (3 42013.1 (3 43012.1 (8 43013.1 (8
4 CONTA-CLIP, INC. 732.564.0705 Data sheets, dimensional drawings and 3D models available on request.
CONTA-CONNECT
Switches UnlimitedContact: [email protected] 800-221-0487 � Fax: 718-672-6370To order online visit www.switchesunlimited.com
Fastening lug set
Cover screw, medium
7) 2 x Pg9/13.5 + 6 x Pg9/13.5 knockouts8) 4 x Pg16/21 + 6 x Pg9/13.5 knockouts9) 4 x Pg16/21 + 8 x Pg9/13.5 knockouts10) 4 x Pg16/21 + 4 x Pg9/16 + 10 x Pg9/13.5 knockouts11) 4 x Pg16/21 + 4 x Pg9/16 + 12 x Pg9/13.5 knockouts
1) 2 x M16/25 + 6 x M12/20 knockouts2) 2 x M16/25 + 4 x M12/20 knockouts3) 4 x M16/25 + 6 x M12/20 knockouts4) 4 x M16/25 + 8 x M12/20 knockouts12) 4 x M20/25 knockouts5) 4 x M12/20 + 4 x M16/25 + 10 x M12/20 knockouts6) 4 x M12/20 + 4 x M16/25 + 12 x M12/20 knockouts
Accessories Catalog No.
Description Dimensions(inch)
Dimensions (mm)
Package size (pcs)
Mounting plates, galvanized steel
45004.9 For 4.92 x 2.95 inch enclosures 3.86 x 1.89 x 0.06 98 x 48 x 1.5 10
45005.9 For 4.92 x 4.92 inch enclosures 3.86 x 3.86 x 0.06 98 x 98 x 1.5 10
45006.9 For 6.89 x 4.92 inch enclosures 5.83 x 3.86 x 0.06 148 x 98 x 1.5 10
45007.9 For 9.84 x 4.92 inch enclosures 8.78 x 3.86 x 0.06 223 x 98 x 1.5 10
45008.9 For 6.89 x 6.89 inch enclosures 5.83 x 5.83 x 0.06 148 x 148 x 1.5 10
45009.9 For 9.84 x 6.89 inch enclosures 8.78 x 5.83 x 0.06 223 x 148 x 1.5 10
Other accessories
45001.9 Fastening lug, set of 4 pcs, polycarbonate 1.18 x 0.59 30 x 15 1
45002.9 Screw set, Includes 4 medium cover screws SLS35 and 4 mounting screws SMS1
1.38 x 0.43 35 x 11 1
45003.9 Screw set, Includes 4 long cover screws for 1.97 inch cover SLS60 and 4 mounting screws SMS1
2.36 x 0.43 60 x 11 1
Lengthinch
(mm)
Widthinch
(mm)
Depthinch
(mm)
Inner depthinch
(mm)
Base depthinch
(mm)
Cover depthinch
(mm)
Polycarbonate grey cover
Polycarbonate transparent cover
Polycarbonategrey cover
metric knockouts
Polycarbonatetransparent covermetric knockouts
Polycarbonategrey cover
Pg knockouts
Polycarbonatetransparent cover
Pg knockouts
4.92(125)
4.92(125)
3.93 (100)
3.36 (85.5)
0.98 (25)
2.95(75)
41030.1 41031.1
4.92(125)
4.92(125)
3.93 (100)
3.36 (85.5)
1.96(50)
1.96(50)
41032.1 41033.1 42014.1 (3 42015.1 (3 43014.1 (8 43015.1 (8
4.92(125)
4.92(125)
4.92 (125)
4.35 (110.5)
1.96(50)
2.95(75)
41034.1 41035.1 42016.1 (3 42017.1 (3 43016.1 (8 43017.1 (8
6.88 (175)
4.92(125)
1.37 (35)
0.80 (20.5)
0.98 (25)
0.39 (10)
41036.1 41037.1
6.88 (175)
4.92(125)
1.96(50)
1.39 (35.5)
0.98 (25)
2.95(75)
41038.1 41039.1
6.88 (175)
4.92(125)
2.36 (60)
1.79 (45.5)
1.96(50)
0.39 (10)
41040.1 41041.1 42018.1 (4 42019.1 (4 43018.1 (9 43019.1 (9
6.88 (175)
4.92(125)
2.95(75)
2.38 (60.5)
0.98 (25)
1.96(50)
41042.1 41043.1
6.88 (175)
4.92(125)
2.95(75)
2.38 (60.5)
1.96(50)
0.98 (25)
41044.1 41045.1 42020.1 (4 42021.1 (4 43020.1 (9 43021.1 (9
6.88 (175)
4.92(125)
3.93 (100)
3.36 (85.5)
0.98 (25)
2.95(75)
41209.1 41210.1
6.88 (175)
4.92(125)
3.93 (100)
3.36 (85.5)
1.96(50)
1.96(50)
41046.1 41047.1 42022.1 (4 42023.1 (4 43022.1 (9 43023.1 (9
6.88 (175)
4.92(125)
4.92 (125)
4.35 (110.5)
0.98 (25)
3.93 (100)
41048.1 41049.1
6.88 (175)
4.92(125)
4.92 (125)
4.35 (110.5)
1.96(50)
2.95(75)
41050.1 41051.1 42024.1 (4 42025.1 (4 43024.1 (9 43025.1 (9
6.88 (175)
4.92(125)
5.90 (150)
5.33(135.5)
1.96(50)
3.93 (100)
41052.1 41053.1 42026.1 (4 42027.1 (4 43026.1 (9 43027.1 (9
6.88 (175)
6.88 (175)
2.95(75)
2.38 (60.5)
1.96(50)
0.98 (25)
41056.1 41057.1 42030.1 (5 42031.1 (5 43030.1 (10 43031.1 (10
6.88 (175)
6.88 (175)
3.93 (100)
3.36 (85.5)
1.96(50)
1.96(50)
41058.1 41059.1 42032.1 (5 42033.1 (5 43032.1 (10 43033.1 (10
6.88 (175)
6.88 (175)
4.92 (125)
4.35 (110.5)
1.96(50)
2.95(75)
41060.1 41061.1 42034.1 (5 42035.1 (5 43034.1 (10 43035.1 (10
6.88 (175)
6.88 (175)
4.92 (125)
5.33 (135.5)
1.96(50)
3.93 (100)
41062.1 41063.1 42036.1 (5 42037.1 (5 43036.1 (10 43037.1 (10
9.84 (250)
4.92(125)
4.92 (125)
4.35 (110.5)
1.96(50)
2.95(75)
41054.1 41055.1 42028.1 (12 42029.1 (12
9.84 (250)
6.88 (175)
2.95(75)
2.38 (60.5)
1.96(50)
0.98 (25)
41064.1 41065.1 42038.1 (6 42039.1 (6 43038.1 (11 43039.1 (11
9.84 (250)
6.88 (175)
3.93 (100)
3.36 (85.5)
1.96(50)
1.96(50)
41066.1 41067.1 42040.1 (6 42041.1 (6 43040.1 (11 43041.1 (11
9.84 (250)
6.88 (175)
5.90 (150)
5.33 (135.5)
1.96(50)
3.93 (100)
41068.1 41069.1 42042.1 (6 42043.1 (6 43042.1 (11 43043.1 (11
www.contaclipinc.com 5Data sheets, dimensional drawings and 3D models available on request.Data sheets, dimensional drawings and 3D models available on request.
Switches UnlimitedContact: [email protected] 800-221-0487 � Fax: 718-672-6370To order online visit www.switchesunlimited.com
Series D Enclosures Type 4, 4X, 6, 12 and 13Sizes 2.16 x 2.09 x 1.42 to 11.81 x 9.05 x 4.37 inch
Series D features:• Available with plain sides
• Contemporary design with faceted corners and cover plugs
• Includes fastening pods inside the cover
• Slots in the base for printed circuit boards
Contents of the product package: • Enclosure base
• Cover
• Cover screws
• Mounting screws
• Cover plugs for cover screws
ConformityPolycarbonate enclosures:
Technical informationUL category: NITW, NITW7Environmental type (UL): 4, 4X, 12, 13, 6Outdoor suitability: UL 746C (f1) rated materialOperating temperature: -40 °F... +176 °F (-40 °C ... +80 °C)Short term temperature range: -40 °F... +248 °F (-40 °C… +120 °CFlammability rating: UL 746CDegree of protection: IP66 and IP67Impact resistance: IK08 (-13 °F... 95 °F / -25 °C... +35 °C) Insulation: Class IIMaterialBase/cover: PolycarbonateCover screws: Stainless steelGasket: PUR (polyurethane)Enclosure side typesPolycarbonate enclosures: Plain sidesStandard colorBase: Gray RAL 7035 Cover: Gray RAL 7035 or transparent
Lengthinch
(mm)
Widthinch
(mm)
Depthinch
(mm)
Base depthinch
(mm)
Inner depthinch
(mm)
Polycarbonate grey cover
Polycarbonate transparent cover
2.17(55)
2.09 (53)
1.42(36)
1.02(26)
1.08(27.5)
41070.1 41071.1
2.48 (63)
2.09 (53)
1.42(36)
1.02(26)
0.98(25.0)
41211.1 41212.1
3.22(82)
3.14 (80)
2.20(56)
1.62(41)
1.65(42.0)
41072.1 41073.1
3.22(82)
3.14 (80)
3.39(86)
2.80(71)
2.83(72.0)
41074.1 41075.1
4.72(120)
3.14 (80)
2.20(56)
1.62(41)
1.65(42.0)
41076.1 41077.1
4.72(120)
3.14 (80)
3.39(86)
2.80(71)
2.83(72.0)
41078.1 41079.1
4.80(122)
4.72(120)
2.20(56)
1.62(41)
1.65(42.0)
41084.1 41085.1
4.80(122)
4.72(120)
3.38(86)
2.80(71)
2.83(72.0)
41086.1 41087.1
6.29(160)
3.14 (80)
2.20(56)
1.62(41)
1.65(42.0)
41080.1 41081.1
6.29(160)
3.14 (80)
3.39(86)
2.80(71)
2.83(72.0)
41082.1 41083.1
6.29(160)
4.72(120)
3.58(91)
2.40(61)
3.05(77.5)
41088.1 41089.1
7.87(200)
4.72(120)
3.38(86)
2.80(71)
2.83(72.0)
41090.1 41091.1
7.87(200)
5.90(150)
2.99(76)
2.40(61)
2.44(62.0)
41092.1 41093.1
9.44(240)
6.29(160)
3.58(91)
3.00(76)
3.05(77.5)
41094.1 41095.1
9.44(240)
6.29(160)
4.76(121)
3.00(76)
4.23(107.5)
41096.1 41097.1
11.81(300)
9.05(230)
3.38(86)
2.20(56)
2.85(72.5)
41098.1 41099.1
11.81(300)
9.05(230)
4.37(111)
2.20(56)
3.84(97.5)
41100.1 41101.1
Catalog No.
Description Package size (pcs)
Mounting plates, galvanized steel
45012.9 For 3.23 x 3.15 inch (82 x 80 mm) enclosures 10
45013.9 For 4.72 x 3.15 inch (120 x 80 mm) enclosures 10
45014.9 For 6.30 x 3.15 inch (160 x 80 mm) enclosures 10
45015.9 For 4.80 x 4.72 inch (122 x 120 mm) enclosures 10
45016.9 For 6.30 x 4.72 inch (160 x 120 mm) enclosures 10
45017.9 For 7.87 x 4.72 inch (200 x 120 mm) enclosures 10
45018.9 For 7.87 x 5.91 inch (200 x 150 mm) enclosures 10
45019.9 For 9.45 x 6.30 inch (240 x 160) mm enclosures 10
45020.9 For 11.8 x 9.06 inch (300 x 230 mm) enclosures 10
Other accessories
45010.9 Fastening lug, set of 4 1
45011.9 Screw set, 6 short cover screws DLS1 and 4 mounting screws DMS1 and cover plugs DCP1 1
6 CONTA-CLIP, INC. 732.564.0705 Data sheets, dimensional drawings and 3D models available on request.
CONTA-CONNECT
Switches UnlimitedContact: [email protected] 800-221-0487 � Fax: 718-672-6370To order online visit www.switchesunlimited.com
www.contaclipinc.com 7
Empty non-metallic Polycarbonate Pushbutton enclosure series. Enclosures are UL 508A and UL TYPE 4, 4X, 6, 12, 13 rated having excellent resistance against UV. Enclosures are proven to withstand arctic and changing climates.
Pushbutton Enclosure features:• Available factory-made 4-way:
– 22.5 mm PB size holes
– 30.5 mm PB size holes
• Contemporary design with faceted corners and cover plugs
• Includes fastening pods inside the cover
Catalog No.
Description Dimensions (inch) Weight(kg)
Package size(pcs)Height Width Depth
41201.1 Pushbutton Box: 1 x 22.5 3.2 3.1 3.4 0.16 1
41202.1 Pushbutton Box: 1 x 30.5 3.2 3.1 3.4 0.16 1
41203.1 Pushbutton Box: 2 x 22.5 4.7 3.1 3.4 0.20 1
41204.1 Pushbutton Box: 2 x 30.5 6.3 3.1 3.4 0.26 1
41205.1 Pushbutton Box: 3 x 22.5 6.3 3.1 3.4 0.26 1
41206.1 Pushbutton Box: 3 x 30.5 7.9 4.7 3.4 0.42 1
41207.1 Pushbutton Box: 4 x 22.5 7.9 4.7 3.4 0.42 1
41208.1 Pushbutton Box: 4 x 30.5 7.9 4.7 3.4 0.42 1
Pushbutton EnclosuresType 4, 4X, 12 and 13Sizes 3.2 x 3.1 x 3.4 to 7.9 x 4.7 x 3.4 inch
ConformityPolycarbonate enclosures:
Technical informationUL category: NITWEnvironmental type (UL): 4, 4X, 6, 12, 13Outdoor suitability: UL 746C (f1) rated material Operating temperature: -40 °F... +176 °FShort term temperature range: -40 °F... +248 °FFlammability rating: UL 746C 5 inch flameDegree of protection: IP66 and IP67Impact resistance: IK08 (-13 °F... 95 °F)Insulation: Class IIMaterialBase/cover: Polycarbonate (PC)Cover screws: Stainless steel, AISI316 Gasket: Hydrofobic PUR Color: Gray RAL 7035
41201.1 41203.1 41204.1 41206.1
Data sheets, dimensional drawings and 3D models available on request.Data sheets, dimensional drawings and 3D models available on request.
Switches UnlimitedContact: [email protected] 800-221-0487 � Fax: 718-672-6370To order online visit www.switchesunlimited.com
8 CONTA-CLIP, INC. 732.564.0705 Data sheets, dimensional drawings and 3D models available on request.
ConformityPolycarbonate enclosures:
Technical informationUL category: NITW, NITW7Environmental type (UL): 4, 4X, 12, 13Outdoor suitability: UL 746C (f1) rated materialOperating temperature: -40 °F... 176 °F (-40 °C ... +80 °C)Short term temperature range: -40 °F... 248 °F (-40 °C… +120 °C)Flammability rating: UL 746CDegree of protection: IP66 and IP67Impact resistance: IK08 (-13 °F... 95 °F / -25 °C... +35 °C) Insulation: Class II
MaterialBase: Fiberglass reinforced polycarbonateCover: PolycarbonateCover screws: Fiberglass reinforced polyamide Gasket: PUR (polyurethane)
Enclosure side typesPC enclosures: Plain sides, metric knockoutsABS enclosures: Plain sides
Standard colorBase: Gray RAL 7035Cover: Gray RAL 7035 or transparent
Series O and W features:• Series O has plain sides or metric knockouts
• Series W has pre-assembled hinges and quick release latches as standard, available with plain sides
• Available in 8 base sizes, one base depth and one cover length
• 2.17-inch-deep extension frame available for alternative depths in all sizes. Several extension frames can be used on top of one another in one enclosure.
• Cover and cover screws equipped with sealing holes
• Cover can also be mounted onto the back of the base
• Wide range of accessories available.
Contents of the product package: 5.12-inch-deep standard enclosure includes:• Enclosure base
• Cover
• Cover screws or latches and hinges
• Mounting screws
7.36-inch-deep standard enclosure includes:• Enclosure base
• Cover
• Extension frame
• Cover screws or latches and hinges
• Mounting screws
• Screws for the extension frame
Series O and W Enclosures Type 4, 4X, 12 and 13Sizes 7.87 x 7.87 x 5.20 to 23.62 x 15.75 x 7.36 inch
Lengthinch
(mm)
Widthinch
(mm)
Depthinch
(mm)
Base depthinch
(mm)
Inner depthinch
(mm)
Polycarbonate gray cover
Polycarbonate transparent cover
11.81(300)
11.81(300)
7.36(187)
4.53(115)
6.69(170)
42044.1 (2 42045.1 (2
15.75(400)
11.81(300)
7.36(187)
6.69(170)
6.69(170)
42046.1 (3 42047.1 (3
23.62(600)
11.81(300)
7.36(187)
6.69(170)
6.69(170)
42048.1 (4 42049.1 (4
Series O with Metric Knock-Outs
1) 12 x M20 + 1 x M16/25 + 8 x M20 + 4 x M25/40 knockouts2) 8 x M12/20 + 5 x M16/25 + 12 x M12/20 + 1 x M32/40 knockouts3) 12 x M20 + 1 x M16/25 + 8 x M20 + 4 x M25/40 knockouts, Includes extension frame4) 8 x M12/20 + 5 x M16/25 + 12 x M12/20 + 1 x M32/40 knockouts, Includes extension frame
CONTA-CONNECT
Switches UnlimitedContact: [email protected] 800-221-0487 � Fax: 718-672-6370To order online visit www.switchesunlimited.com
www.contaclipinc.com 9
OMP3040
Lengthinch
(mm)
Widthinch
(mm)
Depthinch
(mm)
Base depthinch
(mm)
Inner depthinch
(mm)
Series O enclosures with plain sides Series W wall cabinets with hinges and latches
polycarbonate grey cover
polycarbonate transparent cover
grey cover plain sides
transparent cover plain sides
7.87 (200)
7.87 (200)
5.20(132)
4.02(102)
4.53(115)
41102.1 41103.1 41134.1 41135.1
7.87 (200)
7.87 (200)
7.36(187)
6.18(*
(157)6.69(170)
41104.1 41105.1 41136.1 41137.1
11.81(300)
7.87 (200)
5.20(132)
4.02(102)
4.53(115)
41106.1 41107.1 41138.1 41139.1
11.81(300)
7.87 (200)
7.36(187)
6.18(*
(157)6.69(170)
41108.1 41109.1 41140.1 41141.1
11.81(300)
11.81(300)
5.20(132)
4.02(102)
4.53(115)
41114.1 41115.1 41146.1 41147.1
11.81(300)
11.81(300)
7.36(187)
6.18(*
(157)6.69(170)
41116.1 41117.1 41148.1 41149.1
15.75(400)
7.87 (200)
5.20(132)
4.02(102)
4.53(115)
41110.1 41111.1 41142.1 41143.1
15.75(400)
7.87 (200)
7.36(187)
6.18(*
(157)6.69(170)
41112.1 41113.1 41144.1 41145.1
15.75(400)
11.81(300)
5.20(132)
4.02(102)
4.53(115)
41118.1 41119.1 41150.1 41151.1
15.75(400)
11.81(300)
7.36(187)
6.18(*
(157)6.69(170)
41120.1 41121.1 41152.1 41153.1
15.75(400)
15.75(400)
5.20(132)
4.02(102)
4.53(115)
41126.1 41127.1 41158.1 41159.1
15.75(400)
15.75(400)
7.36(187)
6.18(*
(157)6.69(170)
41128.1 41129.1 41160.1 41161.1
23.62(600)
11.81(300)
5.20(132)
4.02(102)
4.53(115)
41122.1 41123.1 41154.1 41155.1
23.62(600)
11.81(300)
7.36(187)
6.18(*
(157)6.69(170)
41124.1 41125.1 41156.1 41157.1
23.62(600)
15.75(400)
5.20(132)
4.02(102)
4.53(115)
41130.1 41131.1 41162.1 41163.1
23.62(600)
15.75(400)
7.36(187)
6.18(*
(157)6.69(170)
41132.1 41133.1 41164.1 41165.1
Series O and W Enclosures
*) Includes the extension frame1) 4 x F1 knockouts 2) 2 x F1 knockouts + 2 x F2 knockouts 3) 4 x F2 knockouts 4) 6 x F2 knockouts
Mounting Plates and Din Rails Catalog No.
Description Dimensions (inch)
Dimensions (mm)
Package size (pcs)
Mounting plates, galvanized steel
45036.9 For 7.87 x 7.87 inch enclosures 6.30 x 6.30 x 0.06 160 x 160 x 1.5 10
45037.9 For 11.81 x 7.87 inch enclosures 10.2 x 6.30 x 0.06 260 x 160 x 1.5 10
45038.9 For 15.75 x 7.87 inch enclosures 14.2 x 6.30 x 0.06 360 x 160 x 1.5 10
45039.9 For 11.81 x 11.81 inch enclosures 10.2 x 10.2 x 0.06 260 x 260 x 1.5 10
45040.9 For 15.75 x 11.81 inch enclosures 14.2 x 10.2 x 0.06 360 x 260 x 1.5 5
45041.9 For 23.62 x 11.81 inch enclosures 22.1 x 10.2 x 0.06 560 x 260 x 1.5 5
45042.9 For 15.75 x 15.75 inch enclosures 14.2 x 14.2 x 0.06 360 x 360 x 1.5 5
45043.9 For 23.62 x 15.75 inch enclosures 22.1 x 14.2 x 0.06 560 x 360 x 1.5 5
Data sheets, dimensional drawings and 3D models available on request.Data sheets, dimensional drawings and 3D models available on request.
Switches UnlimitedContact: [email protected] 800-221-0487 � Fax: 718-672-6370To order online visit www.switchesunlimited.com
10 CONTA-CLIP, INC. 732.564.0705
Cover ScrewsCatalog No.
Description Dimensions (inch)
Dimensions (mm)
Package size (pcs)
45031.9 Screw set, 4 slotted/cross head cover screws OLS42 and 4 mounting screws OMS1
1.65 x 0.02 42 x 14 1
45035.9 Screw set, 4 wing head cover screws OLW55 2.17 x 0.02 55 x 14 1
45032.9 DIN 3 head 1.65 x 0.02 42 x 14 100
45034.9 Screw set, 4 DIN 3 head cover screws OLT42 and 4 mounting screws OMS1 + key OLT42KEY
1.65 x 0.02 42 x 14 1
45033.9 Key for DIN head screw OLT42 2.09 x 1.97 x ø0.87 53 x 50 x ø22 1
Cover screw, slotted/cross head Cover screw, wing head
Other Accessories
Hinge pair Fastening lug setExtension frame screw
Catalog No.
Description Dimensions (inch)
Dimensions (mm)
Package size (pcs)
45024.9 Corner elevator, set of 4 OEL1 0.75 x 0.75 x 0.02 19 x 19 x 14 1
45044.9 Mounting screw, for rails and plates 0.39 x 0.19 10 x 5 100
45022.9 Brass insert, set of 4 OBI1 M3 M3 1
45023.9 Cover plug, polyethylene ø 0.59/0.67 x 0.43 ø 15/17 x 11 12
Threaded bushing Corner elevator
Series O and W Enclosures
Data sheets, dimensional drawings and 3D models available on request.
CONTA-CONNECT
Switches UnlimitedContact: [email protected] 800-221-0487 � Fax: 718-672-6370To order online visit www.switchesunlimited.com
www.contaclipinc.com 11
Series N Wall Cabinets features:• Available with plain sides or with a polycarbonate window
• Available in 7 sizes
• Superb temperature resistance
• Sturdy construction and high resistance to corrosion and solvents
• Suitable for highly demanding environments such as waste water treatment and the petrochemical/chemical industries
• Quick fixture brackets at the back allow fitting without drilling
• Built-in protective edge allows you to open the door 180° in installations and also prevents entry of water when opening the door
• Vertical patterns on the inner side of the door enables correct fitting of devices
Contents of the Product Package: • Door
• Lock and DIN 3 keys (one for each lock) (or 3-point closing with swing handle)
• Enclosure base
Series N Wall CabinetsType 4, 4x and 12Sizes 11.81 x 9.84 x 5.51 to 31.49 x 23.62 x 11.81 inch
ConformityPolycarbonate enclosures:
Technical informationUL category: NITW, NITW7Environmental type (UL): 4, 4x,12Operating temperature: -40 °F... 176 °F (-40 °C... +80 °C)Short term temperature range: -58 °F... 284 °F (-50 °C... +140 °C)Flammability rating: UL 746C Degree of protection: IP66Impact resistance: IK10, models with window IK07Insulation: Class IIMaterialBase/cover: Fiberglass reinforced polyesterLock: Double bit DIN 0.12 inch (3.0 mm)Gasket: PUR (polyurethane)Enclosure side typesGRP enclosures: Plain sidesStandard colorBase/cover: Gray RAL 7035
Lengthinch
(mm)
Widthinch
(mm)
Depthinch
(mm)
Polyester plain sides
Polyester polycarbonate window
plain sides
Mounting plate Chassis for modular devices, IP20
Internal door kit, GRP
GRP Galvanized steel
11.81(300)
9.84(250)
5.51(140)
41166.2 41173.2 45068.9 45061.9
15.74(400)
11.81(300)
7.87(200)
41167.2 41174.2 45069.9 45062.9 45055.9 45048.9
15.74(400)
15.74(400)
7.87(200)
41168.2 41175.2 45070.9 45063.9 45056.9 45049.9
19.68(500)
15.74(400)
7.87(200)
41169.2 41176.2 45071.9 45064.9 45057.9 45050.9
23.62(600)
15.74(400)
9.05(230)
41170.2 41177.2 45072.9 45065.9 45058.9 45051.9
23.62(600)
19.68(500)
9.05(230)
41171.2 41178.2 45073.9 45066.9 45059.9 45052.9
31.49(800)
23.62(600)
11.81(300)
41172.2 41179.2 45074.9 45067.9 45060.9 45053.9
Other AccessoriesCatalog No.
Description Dimensions (inch)
Dimensions (mm)
Package size (pcs)
Wall mounting lugs
45047.9 Set of 4 pcs, plastic - - 1
Locks
45054.9 Key lock with a T-handle - - 1
Lock
Wall mount lugs
Data sheets, dimensional drawings and 3D models available on request.Data sheets, dimensional drawings and 3D models available on request.
Switches UnlimitedContact: [email protected] 800-221-0487 � Fax: 718-672-6370To order online visit www.switchesunlimited.com
12 CONTA-CLIP, INC. 732.564.0705
Hazardous Location EnclosuresType 4x, 12, 13 and NEMA 4X
We offer world-class stainless steel, increased safety and dust proof solutions designed especially for the oil and gas offshore market needs in the USA and Canada. This exclusive enclosure range makes it multi-usable for global and local OEMs for installation in both Division and Zone classified hazardous locations. The range includes cabinets certified as AEx e, AEx tb (USA) and Ex e (Canada) components.
UL Recognized Enclosure features:• Certified to meet the demanding North American requirements
• Suitable for Zones 1 and 2 in gas group IIC
• Suitable for Zones 21 and 22 in dust group IIIC
• Designed for the harsh environment of the Arctic Ocean
• Tested also for extremely high temperatures
• Scalable dimensioning
• Different options for: - Material - Cover fastening - Surface treatment.
Contents of the product package:• Enclosure base
• Cover
• Captive cover screws with washers or a quick lock
• An M6 nut and a washer for grounding
• Models with flange openings include cover plates, bolts and washers.
Standard Features:1. Welded mounting brackets
2. Left-side hinges
3. Removable hinge pin
4. Bolted doors or quarter turn latch locking
5. Special closed-cell gasket
6. Internal/External grounding connection and mounting system for back plate or rail system.
Optional Features: 7. Up to 4 flanges
- Optional flanges can be made with 1/16 inch plates or 1/8 inch plates with bended sides
8. Customized size
VariationsVersion: Cover screws Tight hinges and cover screws on the opposite side Tight hinges and locks Cover screws and hinges enabling free movement of the coverMaterial: Stainless steel, AISI 304 (1.5 mm, 0.05 inch) Stainless steel, AISI 316L (1.5 mm, 0.05 inch) Painted mild steel (1.5 mm, 0.05 inch)Surface treatment: Natural Brushed Polyester painted (custom colors available)Dimensions: Width: 150 – 1,500 mm (5.9 – 39.4 inch)Length: 150 – 1,000 mm (5.9 – 59.1 inch)Depth: 90 – 600 mm (3.5 – 23.6 inch)Grounding: Internal grounding bolt as standard External grounding bolts (M6)Mounting: Welded fastening lugs, horizontal/verticalTechnical informationDegree of protection: IP66/67 or IP66 Service temperature: - 50 to +160 °C / +100 °C / +85 °C (- 58 to +320 °F / +212 °F / +185 °F) ConformityUSR approvals: Class I, Zone 1, AEx e IIC Gb Class II, Zone 21 AEx tb IIIC Db Class II, Div. 2, Groups F, G Class III, Div. 2CNR approvals: Class I, Zone 1, Ex e IIC Gb Class II, Div. 2, Groups F, G Class III, Div. 2Equivalency markings: Class I, Div. 2, Groups A, B, C, D
EN IEC NEC 505 NEC 500
Gas
Ex e Zone 0 Ex e Ga AEx e Class I, Zone 0Class I, Div. 1
Ex e Zone 1 Ex e Gb AEx e Class I, Zone 1
Ex e Zone 2 Ex e Gc AEx e Class I, Zone 2 Class I, Div. 2
Hazardous Area Classifications
Data sheets, dimensional drawings and 3D models available on request.
CONTA-CONNECT
Switches UnlimitedContact: [email protected] 800-221-0487 � Fax: 718-672-6370To order online visit www.switchesunlimited.com
www.contaclipinc.com 13
Catalog No.
Description Service temperature (°C)
Service temperature (°F)
Dimensions (inch) Dimensions (mm)
Length Width Depth Length Width Depth
41180.7 Brushed -55 °C to +160 °C -67 °F to +320 °F 5.9 5.9 3.5 150 150 90
41181.7 Brushed -55 °C to +160 °C -67°F to +320 °F 7.9 5.9 3.9 200 150 100
41182.7 Brushed -55 °C to +160 °C -67°F to +320 °F 7.9 7.9 3.9 200 200 100
41183.7 Brushed -55 °C to +160 °C -67°F to +320 °F 11.8 7.9 4.7 300 200 120
41184.7 Brushed -55 °C to +160 °C -67°F to +320 °F 15.7 7.9 5.9 400 200 150
41185.7 Brushed -55 °C to +160 °C -67°F to +320 °F 11.8 11.8 5.9 300 300 150
41186.7 Brushed -55 °C to +160 °C -67°F to +320 °F 11.8 15.7 5.9 300 400 150
41187.7 Brushed -55 °C to +160 °C -67°F to +320 °F 15.7 15.7 7.9 400 400 200
41188.7 Brushed -55 °C to +160 °C -67°F to +320 °F 23.6 15.7 7.9 600 400 200
41189.7 Brushed -55 °C to +160 °C -67°F to +320 °F 31.5 19.7 7.9 800 500 200
UL Recognized Enclosures with Plain Sides
Catalog No.
Description Service temperature (°C)
Service temperature (°F)
Dimensions (inch) Dimensions (mm)
Length Width Depth Length Width Depth
Brushed AISI 316L cabinets, IP66
41190.7 Zinc DIN-3 lock -55 °C to +85 °C -67 °F to +185 °F 11.8 7.9 6.3 300 200 160
41191.7 Zinc DIN-3 lock -55 °C to +85 °C -67 °F to +185 °F 11.8 11.8 6.3 300 300 160
41192.7 Zinc DIN-3 lock -55 °C to +85 °C -67 °F to +185 °F 15.7 11.8 6.3 400 300 160
41193.7 Zinc DIN-3 lock -55 °C to +85 °C -67 °F to +185 °F 15.7 11.8 7.9 400 300 200
41194.7 Zinc DIN-3 lock -55 °C to +85 °C -67 °F to +185 °F 15.7 15.7 6.3 400 400 160
41195.7 Zinc DIN-3 lock -55 °C to +85 °C -67 °F to +185 °F 15.7 15.7 7.9 400 400 200
41196.7 Zinc DIN-3 lock -55 °C to +85 °C -67 °F to +185 °F 23.6 15.7 7.9 600 400 200
41197.7 Zinc DIN-3 lock, hi-strength mounting lugs -55 °C to +85 °C -67 °F to +185 °F 31.5 23.6 11.8 800 600 300
41198.7 Zinc DIN-3 lock, hi-strength mounting lugs -55 °C to +85 °C -67 °F to +185 °F 39.4 31.5 11.8 1000 800 300
Brushed AISI 316L cabinets with two doors, IP66
41199.7 Zinc DIN-3 lock, hi-strength mounting lugs -55 °C to +85 °C -67 °F to +185 °F 39.4 39.4 11.8 1000 1000 300
41200.7 Zinc DIN-3 lock, hi-strength mounting lugs -55 °C to +85 °C -67 °F to +185 °F 39.4 47.2 11.8 1000 1200 300
UL Recognized Cabinets with Quick Locks
Catalog No.
Description Dimensions (inch)
Dimensions (mm)
Package size (pcs)
Mounting plates, galvanized steel
45084.9 For 5.91 x 5.91 inch enclosures 3.94 x 3.94 x 0.06 100 x 100 x 1.5 1
45084.9 For 5.91 x 7.87 inch enclosures 3.94 x 3.94 x 0.06 100 x 100 x 1.5 1
45085.9 For 7.87 x 7.87 inch enclosures 6.69 x 5.91 x 0.08 170 x 150 x 2 1
45086.9 For 7.87 x 11.81 inch enclosures 5.51 x 10.24 x 0.08 140 x 260 x 2 1
45087.9 For 7.87 x 15.75 inch enclosures 14.17 x 5.51 x 0.08 360 x 140 x 2 1
45088.9 For 11.81 x 11.81 inch enclosures 9.45 x 10.24 x 0.08 240 x 260 x 2 1
45089.9 For 15.75 x 11.81 inch enclosures 13.39 x 10.24 x 0.08 340 x 260 x 2 1
45090.9 For 15.75 x 15.75 inch enclosures 13.39 x 14.17 x 0.08 340 x 360 x 2 1
45091.9 For 15.75 x 23.62 inch enclosures 13.39 x 22.05 x 0.10 340 x 560 x 2.5 1
45092.9 For 19.69 x 31.50 inch enclosures 17.32 x 29.92 x 0.10 440 x 760 x 2.5 1
45093.9 For 23.62 x 31.50 inch enclosures 21.26 x 29.92 x 0.12 540 x 760 x 3 1
45094.9 For 31.50 x 39.37 inch enclosures 29.13 x 37.80 x 0.12 740 x 960 x 3 1
Mounting Plates
Data sheets, dimensional drawings and 3D models available on request.Data sheets, dimensional drawings and 3D models available on request.
Switches UnlimitedContact: [email protected] 800-221-0487 � Fax: 718-672-6370To order online visit www.switchesunlimited.com
14 CONTA-CLIP, INC. 732.564.0705
Cable entry system KDSClick ...a revolutionary cable entry system!
Fast. Safe. Very simple. Our KDSClick cable entry system is a cable management solution for switchgear cabinets, housings and machines that features secure seals and strain relief for pre-assembled and non-assembled cables – with or without connectors. KDSClick saves you time and provides you with maximum versatility.
It’s easy.It’s quick.
It’s KDSClick.
Turning Cables Inside Out
Data sheets, dimensional drawings and 3D models available on request.
CONTA-CONNECT
Switches UnlimitedContact: [email protected] 800-221-0487 � Fax: 718-672-6370To order online visit www.switchesunlimited.com
www.contaclipinc.com 15
Your benefits: more versatility and safetyThe seals can be removed by pressing from the outside inwards. Changes, retrofits,
service work or the readjustment of cable lengths can be made when needed with-
out removing the frame. An optional inner locking frame can be used to prevent
the possibility of unwanted external manipulation.
Three Parts, Many SolutionsA frame. An inlay. A seal. The modular design of these three basic components guarantees maximum versatility, variability and variety.
1. FrameMade from a single mold, the one-piece frame is quick and easy to assemble. It is made of sturdy, glass-fibre reinforced plastic. The foamed seal guarantees an optimal seal with IP66 protection, even on painted or rough surfaces.
2. InlayThe click-in inlays allow for a requirements-based dimensioning of the frame opening for the seal being used. An audible "click" confirms a correct installation. So you can variably configure cable entries to match various requirements (for cables, lines, tubing, pneumatic and hydraulic lines).
3. SealThe seal's tapered shape allows it to be easily pressed in; it reliably seals the gaps and provides strain relief in accordance with DIN EN 62444. The seals are installed by pressing them from the inside outwards into the openings of the previously installed inlays. Their wave-cut profile makes them easy to install and ensures a perfect fit around the cables. There are currently 82 different seals that can be used for sealing cables of various diameters and sizes.
Data sheets, dimensional drawings and 3D models available on request.Data sheets, dimensional drawings and 3D models available on request.
Switches UnlimitedContact: [email protected] 800-221-0487 � Fax: 718-672-6370To order online visit www.switchesunlimited.com
16 CONTA-CLIP, INC. 732.564.0705
Intelligently split sealsTheir wave-cut profile split makes them easy to install and ensures a perfect fit around the cables.
Quick inside-outwards assembly for easier servicing workThe frame does not need to be disassembled if your requirements change or if you're carrying out service work.
Attaching the frameThe one-piece frame can be easily and quickly attached to the wall.
Very versatile high-density assemblies are possible1-way, 2-way, and 4-way seals provide you with excellent versatility for cable management
No loss of guarantee during cable assemblyNo need to disassemble and reconnect connectors, so manufacturer's warranty is not voided.
The Overwhelming Benefits of KDSClick
Data sheets, dimensional drawings and 3D models available on request.
CONTA-CONNECT
Switches UnlimitedContact: [email protected] 800-221-0487 � Fax: 718-672-6370To order online visit www.switchesunlimited.com
www.contaclipinc.com 17
Outstanding seal: IP66 protectionMulti-resistant, tapered seals feature inner and outer sealing gills.
Safe and quick installation with audible feedbackAn audible "click" confirms that the inlay has been correctly installed into the frame.
Maximum versatility with optimized warehousingThe frames, inlays and seals can be combined in many ways – ensuring you many versatile configuration options.
Can be used from – 40 °C to + 120 °CMaterials contain no halogen or silicone, suitable for many different applications.
Integrated strain reliefThe secure fit of the seals ensures a strain relief mechanism for the cables, in accordance with DIN EN 62444.
Click
Data sheets, dimensional drawings and 3D models available on request.Data sheets, dimensional drawings and 3D models available on request.
Switches UnlimitedContact: [email protected] 800-221-0487 � Fax: 718-672-6370To order online visit www.switchesunlimited.com
18 CONTA-CLIP, INC. 732.564.0705
KDS-SR 6/10 Combinations
Type Cat. no. Description Qty.KDS-SR 6/10 BK 28500.4 Screw frame 1
KDS-Set 6/10 BK 28603.4 Set consists of:1 x KDS-SR 6/10 BK, 1 x KDS-Inlay 2 BK, 1 x KDS-Inlay 6 BK
1
AccessoriesType Cat. no. Description Qty.KDS-Inlay 2 BK 28517.4 Inlay, T-shape 5
KDS-Inlay 6 BK 28519.4 Inlay for 6-way splits 5
KDS-IVR 6/10 BK 28501.4 Inner locking frame (optional) 10
Seal Cat. no.KDS-DE Page 22 Small seals 10
KDS-DEG Page 22 Large seals 10
KDS-SR 1-4 Combinations
Type Cat. no. Description Qty.KDS-SR 1-4 BK 28506.4 Screw frame 1
KDS-Set 1-4 BK 28602.4 Set consists of:1 x KDS-SR 1-4 BK, 1 x KDS-Inlay 4 BK
1
AccessoriesType Cat. no. Description Qty.KDS-Inlay 4 BK 28518.4 Inlay for 4-way splits 5
KDS-IVR 1-4 BK 28507.4 Inner locking frame (optional) 10
Seal Cat. no.KDS-DE Page 22 Small seals 10
KDS-DEG Page 22 Large seals 10
KDSClick: Frames and Inlays
• Temperature range: – 40 °C to + 120 °C
• Halogen-free, silicone-free
• Protection: IP66
Features:• Material: Polyamide PA 6.6, glass-fibre reinforced | TPE
• Color: black
• Flammability: UL94 V-0
Data sheets, dimensional drawings and 3D models available on request.
CONTA-CONNECT
Switches UnlimitedContact: [email protected] 800-221-0487 � Fax: 718-672-6370To order online visit www.switchesunlimited.com
www.contaclipinc.com 19
KDS-SR 10/24 Combinations
Type Cat. no. Description Qty.KDS-SR 10/24 BK 28504.4 Screw frame 1
KDS-Set 10/24 BK 28605.4 Set consists of:1 x KDS-SR 10/24 BK, 1 x KDS-Inlay 1 BK, 1 x KDS-Inlay 2 BK, 1 x KDS-Inlay 4 BK, 1 x KDS-Inlay 6 BK
1
AccessoriesType Cat. no. Description Qty.KDS-Inlay 1 BK 28516.4 Inlay for vertical split 5
KDS-Inlay 2 BK 28517.4 Inlay, T-shape for large small 5
KDS-Inlay 4 BK 28518.4 Inlay for 4-way splits 5
KDS-Inlay 6 BK 28519.4 Inlay for 6-way splits 5
KDS-IVR 10/24 BK 28505.4 Inner locking frame (optional) 10
Seal Cat. no.KDS-DE Page 22 Small seals 10
KDS-DEG Page 22 Large seals 10
KDS-SR 8/16 Combinations
Type Cat. no. Description Qty.KDS-SR 8/16 BK 28502.4 Screw frame 1
KDS-Set 8/16 BK 28604.4 Set consists of:1 x KDS-SR 8/16 BK, 1 x KDS-Inlay 1 BK, 2 x KDS-Inlay 4 BK
1
AccessoriesType Cat. no. Description Qty.
KDS-Inlay 1 BK 28516.4 Inlay for vertical split 5
KDS-Inlay 4 BK 28518.4 Inlay for 4-way splits 5
KDS-IVR 8/16 BK 28503.4 Inner locking frame (optional) 10
Seal Cat. no.KDS-DE Page 22 Small seals 10
KDS-DEG Page 22 Large seals 10
Data sheets, dimensional drawings and 3D models available on request.Data sheets, dimensional drawings and 3D models available on request.
Switches UnlimitedContact: [email protected] 800-221-0487 � Fax: 718-672-6370To order online visit www.switchesunlimited.com
20 CONTA-CLIP, INC. 732.564.0705
KDSClick: Separable Cable Glands
Outstanding seal: IP66 protectionMulti-resistant, tapered seals feature inner and outer sealing gills.
Intelligently split sealsTheir wave-cut profile makes them easy to install and ensures a perfect fit around the cables.
Maximum versatilityMore than 80 different seal variants are available.
Versatile assemblyUp to four assembled cables can be used with one cable gland.
Separable locknutEasy to attach to cables that have already been guided through.
All-round SolutionsFor metric break-outs, CONTA-CLIP provides separable cable glands from M20 to M63 for cables with or without connectors. During servicing or retrofitting with pre-assembled cable harnesses, cables with diameters from 2 to 35 mm can quickly and safely be guided into the switchgear cabinet or housing, and then sealed to IP66. The divisible system ensures quick and simple assembly. The slitted seal has a wave-cut profile that ensures a reliable seal and a totally secure attachment. The seal is first placed around the cable and then inserted in one of the two halves.
Depending on the size of the cable gland, up to four seals can be inserted. After that, the two halves of the cable gland are easily snapped together without the use of any tools. A locknut (which can also be separated) on the inside of the cabinet ensures a safe and secure attachment.
The advantages• Assembled cables can be guided through
• Guarantee retained for assembled cables
• Retrofitting and service work is quick and causes
no problems
• High-density assemblies
• Can be installed on standard metric break-outs
• Includes a separable hexagon nut
Data sheets, dimensional drawings and 3D models available on request.
CONTA-CONNECT
Switches UnlimitedContact: [email protected] 800-221-0487 � Fax: 718-672-6370To order online visit www.switchesunlimited.com
www.contaclipinc.com 21
KDS-KV, small version Combinations
Type Cat. no. Description Qty.
KDS-KV M20 BK 28610.4 Separable cable gland, including separable locknut 10
KDS-KV M25 BK 28611.4 Separable cable gland, including separable locknut 10
KDS-KV M32 BK 28612.4 Separable cable gland, including separable locknut 10
Accessories
Type Cat. no. Description Qty.
KDS-GM 20 BK 28616.4 Separable locknut 10
KDS-GM 25 BK 28617.4 Separable locknut 10
KDS-GM 32 BK 28618.4 Separable locknut 10
Seal Cat. no.
KDS-DE Page 22 Small seals 10
KDS-KV, large version Combinations
Type Cat. no. Description Qty.
KDS-KV M40 BK 28613.4 Separable cable gland, including separable locknut 5
KDS-KV M50 BK 28614.4 Separable cable gland, including separable locknut 5
KDS-KV M63 BK 28615.4 Separable cable gland, including separable locknut 5
Accessories
Type Cat. no. Description Qty.
KDS-Inlay 4 BK 28518.4 Inlay for 4-way splits 5
KDS-GM 40 BK 28619.4 Separable locknut 5
KDS-GM 50 BK 28620.4 Separable locknut 5
KDS-GM 63 BK 28621.4 Separable locknut 5
Seal Cat. no.
KDS-DE Page 22 Small seals 10
KDS-DEG Page 22 Large seals 10
• Temperature range: – 40 °C to + 120 °C
• Halogen-free, silicone-free
• Protection: IP66
Features:• Material: Polyamide PA 6.6, glass-fibre reinforced | TPE
• Color: black
• Flammability: UL94 V-0
ø 40
SW 38SW 28
M20x1.5
23.7
15 7
ø 40
SW 38SW 33
M25x1.5
23.7
15 7
ø 40
SW 38SW 40
M32x1.5
23.7
15 7ø 72
SW 68SW 48
M40x1.5
24.7
15
ø 72
SW 68SW 58
M50x1.5
24.7
157
7
ø 72
SW 68SW 72
M63x1.5
24.7
15 7
ø 40
SW 38SW 28
M20x1.5
23.7
15 7
ø 40
SW 38SW 33
M25x1.5
23.7
15 7
ø 40
SW 38SW 40
M32x1.5
23.7
15 7ø 72
SW 68SW 48
M40x1.5
24.7
15
ø 72
SW 68SW 58
M50x1.5
24.7
157
7
ø 72
SW 68SW 72
M63x1.5
24.7
15 7
Dimensional drawings
Dimensional drawings
Data sheets, dimensional drawings and 3D models available on request.Data sheets, dimensional drawings and 3D models available on request.
Switches UnlimitedContact: [email protected] 800-221-0487 � Fax: 718-672-6370To order online visit www.switchesunlimited.com
22 CONTA-CLIP, INC. 732.564.0705
Seals, black smallType Cat. no.: Max. ø Qty.KDS-DE/B BK 28520.4 Blind 10
KDS-DE 1-2 BK 28521.4 2 mm 10
KDS-DE 2-3 BK 28522.4 3 mm 10
KDS-DE 3-4 BK 28523.4 4 mm 10
KDS-DE 4-5 BK 28524.4 5 mm 10
KDS-DE 5-6 BK 28525.4 6 mm 10
KDS-DE 6-7 BK 28526.4 7 mm 10
KDS-DE 7-8 BK 28527.4 8 mm 10
KDS-DE 8-9 BK 28528.4 9 mm 10
KDS-DE 9-10 BK 28529.4 10 mm 10
KDS-DE 10-11 BK 28530.4 11 mm 10
KDS-DE 11-12 BK 28531.4 12 mm 10
KDS-DE 12-13 BK 28532.4 13 mm 10
KDS-DE 13-14 BK 28533.4 14 mm 10
Seals, black largeType Cat. no.: Max. ø Qty.KDS-DEG/B BK 28534.4 Blind 10
KDS-DEG 14-15 BK 28535.4 15 mm 10
KDS-DEG 15-16 BK 28536.4 16 mm 10
KDS-DEG 16-17 BK 28537.4 17 mm 10
KDS-DEG 17-18 BK 28538.4 18 mm 10
KDS-DEG 18-19 BK 28539.4 19 mm 10
KDS-DEG 19-20 BK 28540.4 20 mm 10
KDS-DEG 20-21 BK 28541.4 21 mm 10
KDS-DEG 21-22 BK 28542.4 22 mm 10
KDS-DEG 22-23 BK 28543.4 23 mm 10
KDS-DEG 23-24 BK 28544.4 24 mm 10
KDS-DEG 24-25 BK 28545.4 25 mm 10
KDS-DEG 25-26 BK 28546.4 26 mm 10
KDS-DEG 26-27 BK 28547.4 27 mm 10
KDS-DEG 27-28 BK 28548.4 28 mm 10
KDS-DEG 28-29 BK 28549.4 29 mm 10
KDS-DEG 29-30 BK 28550.4 30 mm 10
KDS-DEG 30-31 BK 28551.4 31 mm 10
KDS-DEG 31-32 BK 28552.4 32 mm 10
KDS-DEG 32-33 BK 28601.4 33 mm 10
Cone-shaped seals, blackType Cat. no.: Max. ø Qty.KDS-DE/K 2-15 BK 28553.4 15 mm 10
KDS-DEG/K 15-34 BK 28554.4 34 mm 10
Seals, black with multiple holesType Cat. no.: Max. ø Qty.KDS-DE 2X4-5 BK 28555.4 5 mm 10
KDS-DE 2X5-6 BK 28556.4 6 mm 10
KDS-DE 4X2-3 BK 28557.4 3 mm 10
KDS-DE 4X3-4 BK 28558.4 4 mm 10
Seals, black AS-Interface cablesType Cat. no.: Qty.KDS-DE/1XASI BK 28559.4 10
KDS-DE/2XASI BK 28560.4 10
Seals, grey smallType Cat. no.: Max. ø Qty.KDS-DE/B GR 28561.6 Blind 10
KDS-DE 1-2 GR 28562.6 2 mm 10
KDS-DE 2-3 GR 28563.6 3 mm 10
KDS-DE 3-4 GR 28564.6 4 mm 10
KDS-DE 4-5 GR 28565.6 5 mm 10
KDS-DE 5-6 GR 28566.6 6 mm 10
KDS-DE 6-7 GR 28567.6 7 mm 10
KDS-DE 7-8 GR 28568.6 8 mm 10
KDS-DE 8-9 GR 28569.6 9 mm 10
KDS-DE 9-10 GR 28570.6 10 mm 10
KDS-DE 10-11 GR 28571.6 11 mm 10
KDS-DE 11-12 GR 28572.6 12 mm 10
KDS-DE 12-13 GR 28573.6 13 mm 10
KDS-DE 13-14 GR 28574.6 14 mm 10
Seals, grey largeType Cat. no.: Max. ø Qty.KDS-DEG/B GR 28575.6 Blind 10
KDS-DEG 14-15 GR 28576.6 15 mm 10
KDS-DEG 15-16 GR 28577.6 16 mm 10
KDS-DEG 16-17 GR 28578.6 17 mm 10
KDS-DEG 17-18 GR 28579.6 18 mm 10
KDS-DEG 18-19 GR 28580.6 19 mm 10
KDS-DEG 19-20 GR 28581.6 20 mm 10
KDS-DEG 20-21 GR 28582.6 21 mm 10
KDS-DEG 21-22 GR 28583.6 22 mm 10
KDS-DEG 22-23 GR 28584.6 23 mm 10
KDS-DEG 23-24 GR 28585.6 24 mm 10
KDS-DEG 24-25 GR 28586.6 25 mm 10
KDS-DEG 25-26 GR 28587.6 26 mm 10
KDS-DEG 26-27 GR 28588.6 27 mm 10
KDS-DEG 27-28 GR 28589.6 28 mm 10
KDS-DEG 28-29 GR 28590.6 29 mm 10
KDS-DEG 29-30 GR 28591.6 30 mm 10
KDS-DEG 30-31 GR 28592.6 31 mm 10
KDS-DEG 31-32 GR 28593.6 32 mm 10
KDS-DEG 32-33 GR 28594.6 33 mm 10
Seals, grey with multiple holesType Cat. no.: Max. ø Qty.KDS-DE 2X4-5 GR 28595.6 5 mm 10
KDS-DE 2X5-6 GR 28596.6 6 mm 10
KDS-DE 4X2-3 GR 28597.6 3 mm 10
KDS-DE 4X3-4 GR 28598.6 4 mm 10
Seals, black AS-Interface cablesType Cat. no.: Qty.KDS-DE/1XASI GR 28599.6 10
KDS-DE/2XASI GR 28600.6 10
KDSClick: SealsFeatures of black seals:• Material: TPE
• Flammability: UL94 HB
• Temperature range: – 40 °C to +120 °C (static)
• Halogen-free, silicone-free
• Excellent resistance to chemicals
• UV-stabilized
• Protection: IP66
Features of grey seals:• Material: TPE
• Flammability: UL94 V-0
• Temperature range: – 40 °C to 90 °C (static)
• Halogen-free, silicone-free
• Protection: IP66
Data sheets, dimensional drawings and 3D models available on request.
CONTA-CONNECT
Switches UnlimitedContact: [email protected] 800-221-0487 � Fax: 718-672-6370To order online visit www.switchesunlimited.com