enclosed controls - milbank€¦ · enclosed controls product catalog milbank manufacturing | 4801...

Enclosed ControlsProduct Catalog

Milbank Manufacturing | 4801 Deramus Ave., Kansas City, MO 64120 | 877.483.5314 | milbankworks.com


2

Please consult serving utility for their requirements prior to ordering or installing, as specifications and approvals vary by utility, and may require local electrical inspector approval. All installations must be installed by a licensed electrician and must

comply with all national and local codes, laws and regulations. Milbank reserves the right to make changes in specifications and features shown without notice or obligation.

MILBANKOVERVIEW

Milbank OverviewEnergy At Work since 1927

Milbank designs and manufactures electrical solutions that move and manage power for the residential, commercial, industrial, utility and transportation sectors. With more than 90 years of expertise in electrical engineering design and manufacturing, Milbank’s portfolio includes metering equipment, enclosures and enclosed controls. Founded in 1927, Milbank is a family-owned, American manufacturer headquartered in Kansas City, Mo. For more information, please visit milbankworks.com.

As a market leader in electrical metering equipment, Milbank has set the standard for quality since 1927. Hundreds of configurations are available, including many sizes, knockout configurations, terminal configurations, bypass options, hubs, locks and connectors. Milbank has the socket you need with thousands of active products to meet your utility’s requirements.

METERING

Milbank’s line of enclosures include commercial junction boxes, panel mount enclosures, transformer cabinets, wireway and troughs. Built with high-quality craftsmanship and materials which meet or exceed industry standards, Milbank enclosures are made to protect controls and equipment from dust, dirt and other harmful elements found in a wide variety of environments based on various NEMA ratings Milbank offers.

ENCLOSURES

Milbank doesn’t just build empty enclosures. We can deliver the entire package, complete with custom control equipment built to your exact specifications by our engineers. Milbank enclosed controls are an attractive, secure, easy to install and cost-effective solution when underground remote site power distribution and control equipment is required, replacing unsightly and inefficient strut and backboard structures.

ENCLOSED CONTROLS


3

Please consult serving utility for their requirements prior to ordering or installing, as specifications and approvals vary by utility, and may require local electrical inspector approval. All installations must be installed by a licensed electrician and must comply with all national and local codes, laws and regulations. Milbank reserves the right to make changes in specifications and features shown without notice or obligation.

Table of ContentsTABLE OFCONTENTS

Enclosed Controls

Product Number Reference Guide ............................................................................................................................... 4-5Enclosed Controls Overview ......................................................................................................................................... 6-7Surface-Mount Enclosed Controls ..................................................................................................................................... 8Main Load Center Commercial Pedestals ......................................................................................................................... 9Switched Load Center Commercial Pedestals ................................................................................................................. 10400 Amps Commercial Pedestals .................................................................................................................................... 11Battery Backup Commercial Pedestals ............................................................................................................................ 12Power Transfer Commercial Pedestals ............................................................................................................................ 13CT Metered Commercial Pedestals ................................................................................................................................. 14Slimline Commercial Pedestals ....................................................................................................................................... 15 Electric Vehicle Charging ................................................................................................................................................ 16Accessories ..................................................................................................................................................................... 17Exterior Color Options .................................................................................................................................................... 18Detailed Drawings ..................................................................................................................................................... 19-30Application Examples ................................................................................................................................................ 31-43


4



Catalog Number Logic1 2 3 4 5 6

CP3ACP3B

5. Service/Main Disconnect(Load centers use plug-in C/B’s; panelboards use bolt-on C/B’s)A = (2) 8 circuit load centers metered, (1) 8 circuit load center unmeteredB = (2) 24 circuit load centersD (1) 42 circuit panelboard (enclosure types H & K only )E =(1) 30 circuit panelboard (400A K or Q)F = (1) 18 circuit panelboardG = (1) 30 circuit load center (400A K or Q)H = (2) 12 circuit load centersJ = No interiors and no branch breakers (Main only)K = (1) 4 circuit load center metered, (1) 4 circuit load center unmeteredL = Distribution block(s) onlyM = (2) Distribution blocksN = Metered and unmetered lug to lug breakersP = Metered lug to lug breakersR = (1) 8 circuit metered, (1) 8 circuit unmetered, (1) 12 circuit meteredT = (1) 8 circuit load center

U = Unmetered lug to lug breakers (Type A)V = (1) 6 circuit plug-on breaker interiorW = (2) 6 circuit plug-on breaker interiorX = Non StandardY = (1) 42 circuit load center 30" tall deadfront1 = (1) 8 circuit load center metered, (1) 8 circuit load center unmetered2 = (2) 8 circuit load centers3 = (1) 12 circuit load center4 = (1) 12 circuit load center and (1) 8 circuit load center5 = (1) 16 circuit load center6 = Lug to lug main & branch breakers only7 = (1) 8 circuit load center, (1) 16 circuit load center8 = Fusible switch (Pullout)9 = (1) 24 circuit load center0 = (2) 16 circuit load centers

3. System Voltage0 = 120V, 1Ø, 2W (4 Jaw)1 = 120/240V, 1Ø, 3W (4 Jaw)2 = 208Y/120V, 1Ø, 3W (4 Jaw + 105J)3 = 240/480V, 1Ø, 3W (4 Jaw)4 = 480Y/277V, 1Ø, 3W (4 Jaw + 105J)5 = 208Y/120V, 3Ø, 4W (7 Jaw)6 = 240Δ/120V, 3Ø, 4W (7 Jaw)7 = 240ΔV, 3Ø, 3W (5 Jaw)8 = 480Y/277V, 3Ø, 4W (7 Jaw)9 = 480ΔV, 3Ø, 3W (5 Jaw)

A = No ratingB = 480Δ/240V, 3Ø, 4W (7 Jaw)C = 120/240V, 1Ø, 3W (5 Jaw)D = 240/480V, 1Ø, 3W (5 Jaw)E = 480V, 1Ø, 2W (4 Jaw)F = 1Ø, 3W, 120/240V, FORM 4S, (6 Jaw)G = NETWORK, 120/208V, 1Ø, 3W FORM 5S (8 Jaw)H = NETWORK, 277/480V, 1Ø, 3W FORM 5S (8 Jaw)I = 3Ø, 3W, Δ 240V, FORM 5S (8 Jaw)J = 3Ø, 3W, Δ 480V, FORM 5S (8 Jaw)

K = 3Ø, 4W, Δ 240V, FORM 8S (13 Jaw)L = 3Ø, 4W, Δ 480V, FORM 8S (13 Jaw)M = 3Ø, 4W, Y 120/208V, FORM 5S (8 Jaw)N = 3Ø, 4W, Y 277/480V, FORM 5S (8 Jaw)O = 3Ø, 4W, Y 120/208V, FORM 6S (13 Jaw)P = 3Ø, 4W, Y 277/480V, FORM 6S (13 Jaw)Q = 3Ø, 4W, Y 120/208V, FORM 9S (13 Jaw)R = 3Ø, 4W, Y 277/480V, FORM 9S (13 Jaw)S = 1Ø, 3W, 220/380V, (5 Jaw)

6. Enclosure Size CP3A (Slimline)A =12”W x 8.25”D x 63”H (Single)B = 20”W x 10.25”D x 63”H (Single)C = 20”Wx10.25”D x 52”H (Single)I = 12”W x 8.25”D x 50”H (Single)J = 20”W x 10.25”D x 50”H (Single)K = 12”W x 8.25”D x 63”H (Single) (Exposed Meter) L = 20”W x 10.25”D x 63”H (Single) (Exposed Meter) M = 12”W x 8.25”D x 50”H (Single) (Exposed Meter) N = 20”W x 10.25”D x 50”H (Single) (Exposed Meter)O = 12”W x 8.25”D x 43”H (Unmetered)P = 20”W x 10.25”D x 43”H (Unmetered)

CP3B - StandardA = 16”W x 17”D x 48”H (Single)B = 24”W x 17”D x 48”H (Double)C = 30”W x 24”D x 48”H or (54”H w/Sloped Top Only) D = 44”W x 24”D x 60”HE = 16”W x 17”D x 41”H (Unmetered, Low Profile)K = 32”W x 20”D x 60”HL = 36”W x 20”D x 60”HM = 24W” x 17”D x 41”H (Unmetered, Low Profile)P = 16”W x 17”D X 48”H (Exposed Meter)Q = 32”W x 20”D x 43.5”H (Unmetered) R = 4”W x 17”D x 48”H (Exposed Meter) S = 32”W x 20”D x 60”H (Exposed Meter)

CP3B Standard (cont.) X = 24”W x 24”D x 64”H ( CT Metered) Z = 32”W x 24”D x 64”H (CT Metered) T = 42”W x 27”D x 64”T (CT Metered) W = 46’W x 27” D x 64”T (CT Metered)

CP2B - Surface MountN = 14”W x 6”D x 39”HO = 35”W x 8”D x 48”H

1. Meter Sockets0 = No sockets1 = 1 ring type socket with test bypass facility2 = 2 ring type socket with test bypass facility3 = 1 ring type socket with, 1 without test bypass facilities4 = 1 ring type socket without test bypass facility5 = 1 ringless socket with lever test bypass facility6 = 2 ringless socket with lever test bypass facility7 = 1 ringless socket without test bypass facility

8 = 1 bolt-on meter with manual bypass facility9 = 1 ringless socket KK horn bypassA = 2 ringless sockets KK horn bypassB = 1 ring type socket with test switch, CT rated meter socketC = 1 ringless socket with test switch, CT rated meter socketD = 1 ring type socket with test bypass , U3504 meter socketE = 2 ring type sockets without test bypass

4. Service/Main Disconnect0 = No Main (Max 6 disconnect per unit)1 = (1) Circuit breaker main2 = (2) Circuit breaker mains

3 = (1) T-fuse pullout main4 = (3) Circuit breaker mains6 = (1) 4-pole main (100A Max.)

8 = (1) 4-pole 100A & (1) 2-pole 100AB = (2) Circuit breaker mains with interlockC = (2) T-Fuse pullout mains

2. Amps0 = No rating 1 = 100 Amps 2 = 200 Amps 3 = 125 Amps 4 = 400 Amps 6 = 600 Amps 8 = 800 Amps

REFERENCE GUIDE


5


Catalog Number LogicReference for EXISTING Catalog Numbers Only

14 = 14K AIC22 = 22K AIC25 = 25K AIC30 = 30K AIC42 = 42K AIC

50 = 50K AIC65 = 65K AIC100 = 100K AIC(Short circuit rating)

AE = Alliant EnergyCE = Common Wealth EdisonCL = Copper NeutralCO = Colorado SpringsCOD = Colorado DOTCS = Cold SequenceCT = CaltransDP = Dayton Power & ElectricEM = Electrical MidwestIA = Iowa DOTID = Idaho DOTIL = Illinois DOTKC = Kansas CityKD = Kansas DOTKK = Horn BypassLA = Louisiana DOTLSMO = Lee’s Summit, MissouriLV = Las VegasLX = LenexaMA = MesaMO = MO DOTMN = Minnesota DOTNRG = NRG Electric LTDNV = Nevada DOTOP = Overland ParkPB = Penta Bolt SealingRI = Rhode Island DOTSL = Switched LoadSN = ShawneeTX = Texas DOT(Followed by pedestalType A, C, D or T)UD = Utah DOTWA = Washington DOTWE = Wisconsin ElectricXC = Xcel Energy

A = Aluminum (add color code)AL = Aluminum AnodizedAO = Aluminum UntreatedB = Brown (RAL 8011)BEB = Beige Brown (RAL 8024)BEG = Beige Green (RAL 1001)BG = Blue Green (RAL 6004)BK = Black (RAL 9004)BK1 = Poly Black (RAL 9005)BK2 = Ebony 334 Black (TCI 9210-90663)BK3 = Topeka BlackBKG = Black Green (RAL 6012)BR = Medium Brown (RAL 8017)BR1 = Brown (TCI 5084)BR2 = Brown (TCI 70-78815W)BR3 = Safari BrownBR4 = BR4 - Brown (FED SPEC 20122)BR5 = Brown (RAL 8008)BR6 = Brown (RAL 8003)BR7 = Western Reserve Pantone 326-1BR8 = Whiteman Brown (FED SPEC 20059)BRN = Brown (FED SPEC 20045)BRP = Brown Gray (RAL 7013)BU = Blue (RAL 5017)BWG = Boxwood Green (TIGER DRYLAC)BZ = Bronze Color (TIGER #39/60060)C = CaramelD = Dark Green #2 (KC)(#VFG505S9)DB = Dark Brown (RAL 8025)DBZ = Dark Bronze (KCMO)DG = Dark Green #1(RAL 8025)DG1 = Dark Green (FED SPEC 14052)DG2 = Dark Green #2 (RAL 6002)DG3 =Dark Green #3 (RAL 6029)DG4 = Dark Green #4 (FED SPEC 14062)DG5 = Franklin Green PGS8-90245 (Sherwin-Williams)DG6 = Dark Green #6 (FED SPEC 14066)DG7 = Dark Green #7 (RAL 6009)DP = Dark Gray (RAL 7036)DS = Desert Sand (Drylac #39/15020)DT = Desert Tan (RAL 9001)FB = Fawn BrownFBK = Flat BlackFST = Tan (FED SPEC 33617)G = Standard Mint Green (Use with AO and SS)G1 = Malaga GreenG2 = Light Green (RAL 6019)G3 = Green (FED SPEC 34424)GA = Green A (TIGER-DR 249/53120)GG = Green G (Grotto Green) (RAL 6007)GW = Gray-White (RAL 9002)LB = Light Brown (RAL 1019)LG = Light Green (FED SPEC 14672)MB = Mesa Brown (KELLY MOORE #183)MB1 = Mahogany BrownMG = Munsel GreenP = Gray (ANSI 61)P1 = Gray (ANSI 49)P2 = Gray (RAL 7038)P3 = Sky Gray (RAL 7001)P4 = Gray (RAL 7030)P5 = Pebble Gray (RAL 7032)P6 = Silk Gray (RAL 7044)P7 = Dove Gray (ANSI 70)PG = Pine Green (RAL 6020)R1 = Orient Red (RAL 3031)RFG = Rain Forest Green (4070)SB = Sepia Bronze (Sherwin-Williams)SC = Sail Cloth (Sherwin-Williams)SG = Summerland Grey (Gray Brown)SGN = Sage GreenSS = Stainless SteelSY = Sand Yellow (RAL 1002)T = Tan (RAL 1015)TB = Terra Brown (RAL 8028)TT = Telcom TanW = White (Exterior Paint) (VALSPAR PTW90005)W1 = Off WhiteWR = Wine Red (RAL 3005)

REFERENCE GUIDE

Note

New part numbers to be assigned by Milbank enclosed controls team.


6



ENCLOSEDCONTROLS

Enclosed Controls Attractive | Easy to Install | Secure | Cost-Effective

Milbank Enclosed Controls are pad-mounted, weather-resistant electrical enclosures consisting of a utility pull section with optional meter socket and a customer section containing distribution and control equipment. Commercial pedestals are an attractive, secure, easy-to-install and cost-effective solution when underground remote site power distribution and control equipment is required, replacing unsightly and inefficient strut and backboard structures.

UL Listed as Industrial Control Equipment (File E113855)

Strut and backboard Commercial pedestal

• NEMA 3R rain-resistant, vandal-resistant cabinet of polyurethane powder coated steel (aluminum or stainless steel also available)• UL listed as enclosed industrial control equipment (UL508A)• Isolated lockable and sealable utility metering and lug landing sections• Lockable customer section for distribution and control equipment with internal deadfront• Print pocket inside customer section door contains wiring schematics and installation instructions• Load centers are UL listed for use with various manufacturers’ circuit breakers• All stainless steel external hardware (screws, bolts, hinges, handles, hasps and sealing screws)

Standard Features


7


ENCLOSED CONTROLS

Enclosed Controls Attractive | Easy to Install | Secure | Cost-Effective

These units are ideal for controlling, metering and power distribution of:• Traffic signals• Street lighting• Power distribution for electric vehicle charging stations• Communication equipment such as cell towers and telephone vaults• Event power for fairgrounds, swap meets, outdoor markets, portable offices,

holiday lights, etc.• Outdoor lighting for athletic fields, tennis and basketball courts,

parking lots, landscaping and subdivision entrances, etc.

• Meter sockets: ring type or ringless, up to 400 Amps• Main and branch breakers or T fuses• Distribution: copper load centers and panelboards• Clocks, timers and relays• Photoelectric cells and controls• Various power receptacles: pin and sleeve, twist lock or straight blade• Contactors: lighting, definite purpose, motor starters• Surge protection and lightning arresters• Generator inlets with interlocked breakers• Push button controls• Thermostat controls, fans and heating strips• Power blocks and terminal blocks• Steel, aluminum and plywood backboards• Transformers• Interlock devices for circuit breakers

Options

• Available in steel, aluminum (raw painted or anodized) or stainless steel construction with powder coated finish available in eight standard colors or special-ordered RAL colors

• Available for applications up to 400 Amps, 120V, 208V, 240V, 277V, 480V - 1Ø or 3Ø

Applications

Available Factory-Installed Options


8



SURFACE MOUNT

ENCLOSED CONTROLS

Enclosed ControlsSurface-Mount Compact Design

Features

• Easy installation• Overhead and underground entry and exit, all in one unit• Meter and components in one enclosure• UL508A & UL891 • Custom component configurations • UL listing covers all internal components• Can be mounted on multiple surfaces • Walls • Poles – narrow profile will have minimal extension past sides • H Frames (Strut)• Multiple bypass options available• Monitoring options available• Can be powder coated in any Milbank standard EC color or custom color.

Surface-Mount Enclosed Control Originally developed for small cellular communications, the surface-mount enclosed control offers the flexibility of larger enclosed controls products with a smaller footprint and several mounting options.

Benefits• Does not take up sidewalk space• Flood resistant• Eliminates need for connecting components: • Wire in - Wire Out

Communications Power

Distribution

StreetscapePower

Distribution

Lighting Control

Applications


9


Main Load Center Commercial Pedestal1Ø3 wire 120/240V or 208Y/120VApplication: remote site service for multiple loadsMilbank Main Load Center Commercial Pedestals are designed to handle the vast majority of all requirements in a standard, stocked configuration. • All units feature a load center with a plug-on, back-fed main breaker. • Standard units are equipped with with a 16 circuit load center in

the 100 Amps or 24 circuit load center in 200 Amps models. • Sub-feed lugs allow feeding an external panel.

If your application requires turning loads on based on “dusk-to-dawn” requirements, be sure to see the Milbank Switched Load Center Commercial Pedestal products on the following page.

Standard PedestalsOptional Fifth Terminal Kit

Main CB Load Center Circuits

Meter Socket TypeAmps Spaces

CP3B11115A22 105J 100 1,2 16 Ring type with test/bypass blocks

CP3B12119A22 105J 200 1,2,3 4 24 Ring type with test/bypass blocks

CP3B51115A22 K3865 100 1,2 16 Ringless socket with lever bypass

CP3B52119A22 K3865 200 1,2,3,4 24 Ringless socket with lever bypass

MAIN LOAD CENTER

COMMERCIAL PEDESTAL

Enclosed ControlsMain Load Center Commercial Pedestals

Features

These units include everything required for remote site service: • Expandable: load centers allow for future expansion without costly

modifications.• All units feature a 200 Amps meter socket with optional field-

installable fifth terminal kit available.• 22K Amps interrupting capacity (AIC) standard.• Optional mounting base can be embedded in concrete for fast, easy

installation.• Separate sealable and lockable utility termination section.• Separate sealable and lockable metering section.• Separate sealable and lockable customer section with a load center

for “always on” loads that include a main circuit breaker, 16 circuit panel in 100 Amps model and 24 circuit panel in 200 amp model

Notes

• Chart shows standard, stocked items. Other options and features are available. Contact factory for options, details and availability.• May require customization based on regional requirements.


10



Standard PedestalsOptional Fifth Terminal Kit

Main CB Contactor Amperage

Meter Socket TypeAmps Spaces

CP3B11110A22SL1 105J 100 1,3 60 Ring type with test/bypass blocks

CP3B12110A22SL1 105J 200 1,2,3,4 100 Ring type with test/bypass blocksCP3B51110A22SL1 K3865 100 1,3 60 Ringless socket with lever bypassCP3B52110A22SL1 K3865 200 1,2,3,4 100 Ringless socket with lever bypass

SWITCHED LOAD COMMERCIAL PEDESTALS

Enclosed ControlsSwitched Load Center Commercial Pedestals

Notes

• Chart shows standard, stocked items. Other options and features are available. Contact factory for options, details and availability.• May require customization based on regional requirements.

Features

These units include everything required for remote site service: • Expandable: load centers allow for future expansion without costly

modifications.• All units feature a 200 Amps meter socket with optional field-installable fifth

terminal kit available.• 22K Amps interrupting capacity (AIC) standard.• Optional mounting base can be embedded in concrete for fast, easy

installation.• Separate sealable and lockable utility termination section.• Separate sealable and lockable metering section.• Separate sealable and lockable customer section with a control circuit including

PE receptacle, Lexan® window, glare shield, Hand-Off-Auto (HOA) switch, contactor controlling a 16 circuit load center for controlled loads, a pre-mounted DIN rail and pre-wired connector to add an optional “plug-and-play” time clock kit for PE on and TC off operation and a circuit directory to document configuration.

• A load center for “always on” loads that includes a main circuit breaker, a control power circuit breaker, a switched load center main breaker, nine (125 or 200 Amps model) or 11 (100 Amps model) blank breaker spaces and a circuit directory to document configuration. Ringless Lever Bypass shown

Traffic Signals Parking Lots Highways Athletic Field Lighting

Switched Load Center Commercial Pedestals1Ø3 wire 120/240V or 208Y/120V Designed not only to provide power for various loads, but also to switch specific loads on and off under certain conditions. A photoelectric cell is used for these controlled loads, and an optional time clock is also available.


11


400 AMPSCOMMERCIALPEDESTALS

Enclosed Controls400 Amps Commercial Pedestals

Standard PedestalsOptional fifth Terminal Kit

Main CB Load Center Circuits Meter Socket Type

CP3B1411JB N/A 320 Amps (400 max) 0 Ring type with test/bypass studs

CP3B14120B N/A 2-200 Amps (2) 12 circuit Ring type with test/bypass studsCP3B54120B22 K3865 2-200 Amps (2) 12 circuit Ringless with lever bypass

CP3B5411JB22 K3865 320 Amps (400 max) 0 Ringless with lever bypass

Designed to provide a weather- and vandal-resistant metered enclosure for various loads and distribution, the 400 Amps Commercial Pedestal (in bold) can handle a wide range of applications using standard, stocked configurations.• Choice of a single main breaker or twin service disconnect

breakers gives flexibility to the pedestal design. • Optional distribution with feed-through lugs below the service

disconnect breakers allows the pedestal to handle numerous applications.

• Typical applications include remote homes where the metering is best located at the curbside or other remote area. The pedestal can also provide power to a secondary residence, on-site business, workshop, irrigation, lighting, security or other secondary load.

• Refer to page 18 for color options.

Features

These units include everything required for remote service:• Main circuit breaker or dual service disconnects• Expandable: load center units allow for future expansion without

costly modifications• Optional mounting base can be embedded in concrete for

fast, easy installation• Separate sealable and lockable utility termination section with lug

termination• Separate sealable and lockable metering section • Separate sealable and lockable customer section with a circuit

directory and a print pocket to hold all documentation• Meter socket options include ring type with bypass studs, ringless

with heavy duty lever bypass, or K Type bolt-on

Notes

• Chart shows standard, stocked items. Other options and features are available. Contact factory for options, details and availability.

• Stud utility landing is standard. Lug kits are available from factory.

• Units with load centers have (2) #6-250 sub-feed lugs on each load center. (Each load center is 200 Amps rated and UL listed with: Siemens, General Electric and Cutler-Hammer plug-in style circuit breakers.)

• May require customization based on regional requirements.

Commercial Job Sites Remote Site for Residential &

Commercial Job Sites


12



Designed to provide battery backup power for various loads and to switch specific loads on and off under certain conditions; as an example, the pedestal could use a photoelectric cell or time clock to control lighting circuits. Metered and unmetered power distribution options are available. The backup power pedestal is designed to handle the vast majority of today’s backup power requirements. By using a 19-inch rack design, shelves can be adjusted to accommodate the required batteries and manufacturers’ DC to AC inverters, transfer switches and other related equipment. This design gives the user a wide range of design and configuration options. Complete turnkey, ready to power-up pedestals are offered along with basic units ready to accept batteries and inverters supplied by others.Features

• 100 through 320 Amps meter socket with the option of either a ring type socket (conforms to EUSERC 308) with or without test/bypass blocks or a heavy duty ringless socket with lever bypass

• Separate sealable utility termination compartment• An isolated separate customer section with service disconnects,

power distribution options and power control • 19-inch wide rack in customer compartment for easy layout of

equipment• Battery trays• Thermostat with cooling fan• Filtered louvers for heat rise flow through ventilation• Three-point door latch (key or padlockable)

BATTERY BACKUPCOMMERCIALPEDESTALS

Enclosed ControlsBattery Backup Commercial Pedestals

Options

• Manual bypass switch• Transfer switch for generator power

backup• Generator inlet receptacles 30 Amps

through 200 Amps• Padlockable provision for receptacles• Police access door

• Metered load center distribution• Unmetered load center distribution• Photo electric controls (for street

lighting)• Time clocks• HOA switches• Contactors

• GFCI duplex receptacles• Thermostat for heating control• Heating pads or elements• Roll out shelves for batteries• Surge arresters and lighting arresters

Note


Traffic Signals Parking LotsCommunications Power Distribution

Camera & SecurityLocations


13


POWER TRANSFERCOMMERCIALPEDESTALS

Enclosed ControlsPower Transfer Commercial Pedestals

Providing metered or unmetered AC power, distribution, surge suppression, mechanical interlock and standby generator receptacle — all in a neat, compact pedestal.

Features

• 120/240V 1Ø3W through 277/480V 3Ø4W ratings• Metered or unmetered units• Choice of EUSERC ring type or ringless meter sockets• 60 Amps through 400 Amps ratings • Padlockable, isolated utility compartments• 20 Amps GFCI convenience receptacle• Lockable recessed generator receptacle door • Utility and generator indicator light options• All stainless steel hardware• Galvanized steel, aluminum or stainless steel cabinet options• Custom designs available

Note


Traffic SignalsCommunications

Power DistributionPump & LiftStations


14



CT METEREDCOMMERCIALPEDESTALS

Enclosed ControlsCT Metered Commercial Pedestals

Designed to be used where a smaller service package would be a better choice over larger switchgear equipment, these pedestals have amperage ratings of 400 to 800 Amps at voltages up through 480V three phase.

Features

• Up to 800 Amps• A low profile CT pedestal• All utility equipment is isolated in separated

padlockable and sealable compartments • Separate customer compartment designed to hold

distribution and control equipment• Dead front customer protection• Optional mounting base• Optional construction in steel, aluminum and

stainless steel• Refer to page 18 for color options

Note


Pump & LiftStations

Water Treatment Plants

Commercial &Industrial Control

Systems

Electric VehicleCharging Stations


15


SLIMLINE COMMERCIALPEDESTALS

Enclosed Controls Slimline Commercial Pedestals

Provides a sleeker, smaller footprint, with wireway access on the side of the unit rather than the back, allowing maximum flexibility to place the pedestal anywhere physical space is at premium.

Providing unmetered AC power, distribution, surge suppression, mechanical interlock and standby generator receptacle — all in a neat, compact pedestal.

Features• 100 or 200 Amps• Vandal-resistant, secure and attractive design• Customer compartment with distribution and control equipment with swing deadfront door,

secured with both a hasp/latch and draw latch outer door• Utility metering compartment protected with a hinged hood, increasing resistance to

meter vandalism• Small footprint• Wireway located on left side of pedestal for utility incoming wire, allowing pedestal to be

mounted with back as close as 14 inches to walls or structures• Available in 12- and 20-inch widths and 50- and 63-inch (metered) and 43-inch (unmetered) heights• Includes a print pocket for plans and drawings• Voltage range: 120V–480V• Compatible with both ringless and ring type meter sockets, 4–7 terminals

• Refer to page 18 for color options• Pedestal mounting base option saves time and labor to install on a cement pad—no anchor bolts required• Powder coated G90 galvanized steel or aluminum; raw, anodized or powder coated, as well as stainless steel

exterior options

Note

• May require customization based on regional requirements

Direct bury pedestals offer many advantages. With no need to coordinate, buy or wait for concrete, installation time can be cut down to less than an hour. Traditional direct bury pedestals are awkward to transport and handle and can only be used in a direct bury application. Milbank’s modular design offers flexibility and convenience for distributors

and contractors alike. It’s constructed with 14-gauge steel and only available for 12-inch pedestals.

Water Treatment Plants

Highways Parks &Landscaping


16



Enclosed ControlsPower Distribution Pedestal for Electric Vehicle Charging

ELECTRIC VEHICLE

CHARGING

Milbank is a pioneer with EV charging distribution pedestals. With the increased emphasis on electric vehicles and the need to build infrastructure to support these vehicles, Milbank has been there from the beginning. Ranging from small charging station installations to multi-unit fast-charge arrays, Milbank has the solution.

Standard Features

• Metered and unmetered• 200-800 Amps• 120/208V or 120/240V or 277/480V• Predesigned shells• Predesigned interiors• Separate sealable utility termination compartment Customizable Features

• Color• Meter type/form• Utility landing format• 480V for fast charging applications• Filtered louvers for heat rise flow through ventilation• Interiors that will accept site-specified breaker quanities

and sizes• Multiple latching and locking options available


17


ENCLOSED CONTROLS

ACCESSORIES

Enclosed ControlsAccessories

105JFifth terminal kit for use with

ring type meter sockets

K3865Fifth terminal kit for use with ringless lever bypass meter

sockets

CP-ABK5/8Anchor bolt kit (includes four

5/8-13" x 18" anchor bolts)

CP-TC7D7-day time clock kit

CP-TC24H24-hour time clock kit

CP-TCWIREMale 4-pin connector and wiring harness for use with

time clocks other than shown

CP-PE-TYP5-2POSTwo position PE control kit

CP-PE-HOA-3POSHOA (Hand-Off-Auto) switch

for field installation

CP-16PDMNT-CALT - 16" pedestal mounting base

CP-24PDMNT-CALT - 24"pedestal mounting base

CP-32PDMNT - 32"pedestal mounting base

The Milbank mounting base is a standalone foundation system that doesn’t need to be used in conjunction with anchor bolts. The base is intended to be encased in concrete up to the top flange while leaving the mounting hardware intact. Once the concrete has cured, the mounting bolts can be removed and reused to secure the pedestal.

Bases available for all Milbank enclosed controls.All bases include mounting hardware.


18




Additional Colors

Additional colors are available at the customer’s request. Please note: any deviation from the standardized colors can affect the overall price and manufacturing time. Be sure to contact your sales representative for more information.

EXTERIORCOLOR CHART

Enclosed ControlsExterior Color Options

Available Colors

Milbank offers standardized colors to all customers at no additional cost. Below are close approximations of the colors available. Please note: the color chips below may vary slightly in color or gloss from actual coatings due to the effects of heat, light and the manufacturing process. Please contact your sales representative for more information.

Mint Green(EUSERC territory standard)

Black Desert Tan Dark Green

Summerland GrayGray(Non-EUSERC territory standard)

WhitePine Green


19


SURFACE-MOUNTDRAWING

Enclosed ControlsSurface-Mount Compact Enclosed Control

“N” Style Surface-Mount Enclosed Control


20



ENCLOSED CONTROLS DRAWING

Enclosed Controls16" Metered & Unmetered Commercial Pedestal Drawings

17"ENCLOSURE

DEPTH

ALL SIDES. 6" REC.FOUNDATION EXTENSION

RECOMMENDED MIN.3"

REQUIRED PERN.E.C 110-16

TYPICAL

36" MIN.CLEARANCE

FRONT & BACK

42"

23.5" UTILITYTERMINATIONLANDING MIN.

MOUNTING BASE MOUNTING BASE

ANCHOR BOLT

MOUNTING HOLES

MOUNTING BASE DETAIL

MOUNTING HOLESPEDESTAL

9 3/4"

15"16"

14 1/2"

12 1/4"16"14 1/2"

13"

6 3/4"UTILITYSECTION

CUSTOMERSECTION

WITH COVER

PRINT

WINDOW

POCKET

HINGEDDEMANDMETERRESET

HINGED EXTERIOR DOORWITH DOOR STOP TO HOLDDOOR IN OPEN POSITION

48"

HINGEDDEADFRONT

SECURITY

(IF APPLICABLE)

LIFT-OFF

PHOTO CELL WINDOW

FOR

WITH SHIELD

DOOR

COVER

SERVICECOVER

FULLY HINGED

THROUGH

METER SECTION

PADLOCKBRACKETEXTENDS

REMOVEABLETEST BYPASSBLOCK COVER

(IF APPLICABLE)

Pad-mount Base or (4) 5/8-11 X 18" Anchor Bolts Recommended

CP-16PDMNT-CALTCP-16PDMNT-CALT

23 7/8" UTILITYTERMINATIONLANDING MIN.

N.E.C 110-16TYPICAL

FRONT & BACK

MINIMUM DEPTH.ALL SIDES. 6" REC.

FOUNDATION EXTENSION RECOMMENDED MIN.3"

36" MIN.CLEARANCE

REQUIRED PER

17"ENCLOSURE

DEPTH

CP-16PDMNT-CALTMOUNTING BASE

POCKETPRINT

HINGEDEXTERIORDOOR

40 1/2"

32 1/4"

Pad-mount Base or (4) 5/8-11 X 18" Anchor Bolts Recommended

WITH SHIELD(IF APPLICABLE)

COVERSERVICELIFT-OFF

SECURITYDOOR FOR THROUGH

LATCH HASPEXTENDS

PHOTO CELL WINDOW

HINGEDDEADFRONT

CP-16PDMNT-CALTMOUNTING BASE

MOUNTING HOLES

SECTION

UTILITY


CUSTOMER

MOUNTING HOLESANCHOR BOLT

SECTION

PEDESTAL

14 1/2"12 1/4"

9 3/4"

16"15"

14 1/2"

13"

16"

6 3/4"

“A” Style 16" Metered Commercial Pedestal

“E” Style 16" Unmetered Commercial Pedestal | Low Profile


21


METERED ENCLOSEDCONTROLSDRAWING

Enclosed Controls16"- 24" Metered Commercial Pedestal Drawings

CLEARANCEREQUIRED PER

N.E.C 110-16

DEPTHENCLOSURE

17"

TYPICALFRONT & BACK

36" MIN.

3" RECOMMENDED MIN.FOUNDATION EXTENSIONALL SIDES. 6" REC.MINIMUM DEPTH.


42"

MOUNTING BASE

UTILITY

SECTION

SECTION

CUSTOMER

PEDESTALMOUNTING HOLES


12 1/4"14 1/2"

22 1/2"

21"

23"

24"

6 3/4"

9 3/4"16"

MOUNTING BASE

DEADFRONT

THROUGH

SECURITY

(IF APPLICABLE)

COVER

HINGED

PHOTO CELL WINDOW

FULLY HINGED

WITH SHIELD

FOR

METER SECTION

24" COMMERCIAL PEDESTAL


DOOR



(IF APPLICABLE)

POCKET

WINDOWWITH

PRINT

COVER



48"

“B” Style 24" Metered Commercial Pedestal

3" RECOMMENDED MIN.FOUNDATION EXTENSION

ALL SIDES. 6" REC.MINIMUM DEPTH.

36" MIN.CLEARANCE


TYPICALFRONT & BACK

17"ENCLOSURE

DEPTH

WITH SHIELD(IF APPLICABLE)

PHOTO CELL WINDOW

SEALABLEPAD LOCKABLEMETER COVER

48"

16"

40"

MOUNTING BASE

FOR SECURITY

(EXPOSED METER)16" COMMERCIAL PEDESTAL


PADLOCKBRACKETEXTENDSTHROUGH

DOOR

HINGEDDEADFRONT


17"

MOUNTING BASE

UTILITY


SECTION


CUSTOMERSECTION

9 3/4"

16"15"

14 1/2"

13"

16"14 1/2"

12 1/4"

6 3/4"

“P” Style 16" Metered Commercial Pedestal


22



UNMETERED ENCLOSED CONTROLSDRAWING

Enclosed Controls24" Unmetered & Metered Commercial Pedestal Drawings

22 1/2"UTILITY

TERMINATIONLANDING

3" RECOMMENDED MIN.FOUNDATION EXTENSIONALL SIDES. 6" RECOMMENDEDMINIMUM DEPTH.

CUSTOMERSECTION


“M” Style 24" Metered Commercial Pedestal

LIFT-OFFSERVICECOVER


DOORFOR

SECURITY

PHOTO CELL WINDOWWITH SHIELD

(IF APPLICABLE)

HINGEDDEADFRONT

PRINTPOCKET



UTILITY TERM.SECTION

36" MIN.CLEARANCE


TYPICALFRONT & BACK

21 1/2"

12 1/4"

15 3/8"

17"

""

6 1/2"

14 1/4"

24"

22 1/2"

1 7/8"1 1/2"

21"

Pad Mount Base or (4) 5/8-11 X 18" Anchor Bolts Recommended

CP-24PDMNT-CALTCP-24PDMNT-CALT

“M” Style 24" Unmetered Commercial Pedestal

“R” Style 24" Metered Commercial Pedestal



36" MIN.CLEARANCE


TYPICALFRONT & BACK

17"ENCLOSURE

DEPTH

MOUNTING BASEMOUNTING BASE

SERVICECOVER

LIFT-OFF

SECURITYFOR


DOOR

HINGEDDEADFRONT

TERMINATION23.5" UTILITY

LANDING MIN.

17"


SECTIONUTILITY


CUSTOMERSECTION

12 1/4"

24"

23"

22 1/2"

21"

16"14 1/2" 9 3/4"

6 3/4"

WITH SHIELDPHOTO CELL WINDOW

(IF APPLICABLE)


40"

48"

24"


23


UNMETERED & METERED

DRAWINGS

Enclosed Controls32" Unmetered & Metered Commercial Pedestal Drawings

“K” Style 32" Metered Commercial Pedestal

CLEARANCEREQUIRED PER

N.E.C 110-16

DEPTHENCLOSURE

17"

TYPICALFRONT & BACK

36" MIN.


POCKETPRINT

COVER

DOOR IN OPEN POSITION

WINDOW

HINGED EXTERIOR DOORWITH DOOR STOP TO HOLD

WITH


RINGLESSMETER

SOCKET

53.0

6

8.043

DEADFRONT

THROUGH

COVERMETER SECTION

SECURITY

(IF APPLICABLE)

HINGED

PHOTO CELL WINDOW

FULLY HINGED

WITH SHIELD

FOR


DOOR



(IF APPLICABLE)

SECTION


UTILITY

SECTIONCUSTOMER


CUSTOMERSECTION

14 1/4"16 1/2"

30 1/2"

21"

31"

32"

7 3/4"

11 3/4"18"


“Q” Style 32" Unmetered Commercial Pedestal

17"

TYPICALFRONT & BACK

N.E.C 110-16REQUIRED PER

CLEARANCE

ENCLOSUREDEPTH

36" MIN.


22 1/2"UTILITY

TERMINATIONLANDING

COVERSERVICE

Milbank Mounting Base

BACK VIEW

CP-32PDMNT

Recommended:

FRONT VIEW

LIFT-OFF

PRINTPOCKET


34.4

4

43.5

"

0"

"30

32"


CUSTOMER

UTILITYSECTION

SECTION



CUSTOMERSECTION

11 3/4"14 1/4"

16 1/2"

30 1/2"

29"

31"

32"

7 3/4"

18"

REAR DOORCUSTOMER

PAD LOCKABLE

UTILITYDOOR

(IF APPLICABLE)

SECURITY

WITH SHIELD

DOORFOR


PHOTO CELL WINDOW

HINGEDDEADFRONT

RIGHT VIEW

20"

8.98 ID


24



Enclosed Controls32" Metered Commercial Pedestal Drawings

METERED DRAWINGS



DEPTHENCLOSURE

17"


TYPICAL

36" MIN.CLEARANCE

FRONT & BACK

PHOTO CELL WINDOWWITH SHIELD

(IF APPLICABLE)


"52

"32

60"

SECTION

CUSTOMER

UTILITY

SECTION



UTILITYSECTION

14 1/4"

32"31"

30 1/2"

29"

18"16 1/2" 11 3/4"

7 3/4"


SERVICECOVER

LIFT-OFF

SECURITYFOR

(2)PADLOCKBRACKETSEXTENDSTHROUGH

DOOR

HINGEDDEADFRONT

TERMINATIONLANDING MIN.

23.5" UTILITY

20"

“S” Style 32" Metered Commercial Pedestal (with one or two meters)


25


Enclosed Controls32"- 42" CT Rated Commercial Pedestal Drawings

CT RATED METERED

DRAWINGS

“Z” Style 32" Metered Commercial Pedestal - CT Rated

“T” Style 42" Metered Commercial Pedestal - CT Rated

3.00 RECOMMENDED MIN.FOUNDATION EXTENSIONALL SIDES. 6" RECOMMENDEDMINIMUM DEPTH.

POCKETPRINT

8.00" x 8.00"VIEWING WINDOW

(INSIDE)


42.00"

"40

.53

64.

00

C C N.E.C. 110-6

FRONT & BACK

REQUIRED PERCLEARANCE

TYPICAL

MOUNTING DETAIL

36" MIN.

MOUNTING BASECP-42X27PDMNT

CHECK WITH LOCAL UTILITYTO DETERMIND IF LUGS ORSTUDS ARE REQUIRED FOR FIELD WIRING.

handle

HINGED

THROUGH

LIFTING EYESMETER SECTION

COVER

DOOR

SECURITYFOR

DEADFRONT


Padlockable 1/4 turn

FULLY HINGED

9.3127

15.19

STUD

DOOR IDTO

" DEEP

7.33 "

43.64"TO BOTTOM

OF LUG

SECTION C-C

UTILITYSECTION

CUSTOMERSECTION

13 3/4"

21.

50

40 1/2"

27" ENCLOSURE

DEPTH

42.00"

3.00 RECOMMENDED MIN.FOUNDATION EXTENSIONALL SIDES. 6" RECOMMENDEDMINIMUM DEPTH.

FRONT & BACK

METER SECTION

MOUNTING DETAIL

36" MIN.

REQUIRED PER

TYPICAL

CLEARANCE

COVER

N.E.C. 110-6

MOUNTING BASECP-32X24PDMNT

FULLY HINGED

DESCRIPTION

SCALE 1 : 12SECTION C-C

SECTIONUTILITY

CUSTOMERSECTION

.7530 9/16"32 1/8"

1 1/2"

19 1/4"

13 3/4"

1 7/8"

24" ENCLOSURE

DEPTH

PRINTPOCKET(INSIDE)

COVERWITH

WINDOW



32.00"

"40

.53

64.

00

CC

THROUGH

PADLOCKABLE 1/4 TURN HANDLE

DEADFRONT

SEALING PROVISION PROVIDED ON EACH UTILITY DOOR

SECURITYFOR

WIRE SUPPORT

SINGLE STUD LANDING

DOOR


HINGED

LIFTING EYES

24

9.31

12.00

CONNECTOR

" DEEP

15.11

OF

42.00"TO BOTTOM

4.00"STUDTO

DOOR ID


26



Enclosed Controls46" CT Rated Unmetered Commercial Pedestal Drawings

CT RATEDUNMETERED DRAWINGS

“W” Style 46" Metered Commercial Pedestal - CT Rated


27


Enclosed Controls44" Unmetered Commercial Pedestal Drawings

UNMETEREDDRAWINGS

“D” Style 44" Unmetered Commercial Pedestal

AA

DESIGN FOR 19”RACK MOUNTABLEEQUIPMENT

WITH DOOR STOP TO HOLDDOOR IN OPEN POSITION

POCKETPRINT

HINGED EXTERIOR DOOR

3-POINT CAM LATCHPADLOCK-ABLE

44”

FRONT

5/8 ANCHOR BOLT PLACEMENT

BACK

60”

24”

SECTIONUTILITY

SECTIONCUSTOMER

SCALE 1 : 14SECTION A-A

CUSTOMERSECTION

16.000

21.5

31

16.00

39.50


28



Enclosed Controls12" & 20" Slimline Pedestal Drawings

SLIMLINEDRAWINGS

“B” Style 20" Covered Metered Commercial Pedestal - Slimline

“A” Style 12" Covered Metered Commercial Pedestal - Slimline

3"RECOMMENDED MIN.

FOUNDATION EXTENTIONALL SIDES. 6" RECMINIMUM DEPTH

36" MIN.CLEARANCE

REQUIRED PERN.E.C. 110-16

TYPICALFRONT & BACK

20.00"PEDESTAL WIDTH

10.25"ENCLOSURE

DEPTH

58.624"

SECTIONCUSTOMER

BASE DETAIL

SCALE 1 : 12

MOUNTING

SECTION C-C

UTILITYSECTION

5.250"

16.00"

8.0

0

7.0

0

14.438"

LEFT-OFFSERVICECOVER

SERVICETERMINATIONLINE/LOAD350-#6

42.

734"


12.

00"

CP-20-PADPART NUMBER

MOUNTING BASEAND HARDWARE

Wednesday, September 02, 2015 10:02:13 AM tbennett

Shear/Die No.:

TB

B-Size CP3A Outline

Paint Qty.:

LBS. EA.

TB

X.XXXX

STEEL

**

GRAMS

TB1 of 2

B-Size CP3A Outline

Material:

Finish:

Catalog No.:

Title:

Customer:

Drawing No.:

KANSAS CITY, MO

GALVANIZED, 14 GA STAINLESS

METERED SLIM LINE

02-15-13 Sheet:

Tolerances:

2DESCRIPTION

X.XX.XX

USA

Drawn By:

Scale: NTSDate:

.125 ALUMINUM, 14 GA

.015

.03

.1

Third Angle

Checked By:

Part Wt.:

DATE BY

A02-15-1309/02/15

FIRST RELEASEMAKE 2 INCHES DEEPER

Unless Specified Otherwise

B-SIZE, 63T x 20W x 10.25W,

Approved By:

REV. ECO No.

20" COMMERCIAL PEDESTAL

FOR

BRACKET

DRAW LATCH

DOOR

FULLY HINGED

WINDOW

HINGED DEAD FRONT

SECURITY

EXTENDS

METER SECTION

THROUGH

PADLOCKABLE

SLIM LINE 63 INCH TALL

WITH SHIELD

COVER

(IF APPLICABLE)

(1.75")

PADLOCK

PHOTO CELLKNOCKOUT

REMOVEABLETEST BYPASSBLOCK COVER(IF APPLICABLE)

C C

WINDOWWITH

HINGEDDEMANDMETERRESETCOVER

PRINTPOCKET

21.125"

20.00"

63.00"

3"RECOMMENDED MIN.

FOUNDATION EXTENTIONALL SIDES. 6" RECMINIMUM DEPTH

36" MIN.CLEARANCE

REQUIRED PERN.E.C. 110-16

TYPICALFRONT & BACK


8.25"ENCLOSURE

DEPTH

LIFT-OFFSERVICECOVER


42.

734"


12.

00"

BASE DETAILMOUNTING

SCALE 1 : 12

CUSTOMERSECTION

SECTION C-C

UTILITYSECTION

5.078"

8.00"

6.0

0

5.0

0

6.610"

BLOCK COVER(IF APPLICABLE)

(1.75")WINDOW

HINGED

SLIM LINE 63 INCH TALL12" COMMERCIAL PEDESTAL

SECURITYFOR

DOORTHROUGHEXTENDSBRACKET

(IF APPLICABLE)

FULLY HINGED

WITH SHIELD

COVERMETER SECTION

DEAD FRONT

PADLOCK

PHOTO CELLKNOCKOUT

REMOVEABLETEST BYPASS

PADLOCKABLEDRAW LATCH

C C

MOUNTING BASE AND HARDWAREPART NUMBERCP-12-PAD2

A-Size CP3A Outline

A-Size CP3A Outline

2

Material:

Finish:

Catalog No.:

Title:

Ref:

Drawing No.:

General Offices:

Drawn By:Scale: NTS

Date: Sheet 1 of 10-10-12

Kansas City, MO

Tolerances:Unless Specified OtherwiseX.XX.XXX.XXXX 2

.015

.03

.1

Third Angle

Projection

Checked By:Approved By:

SLIM LINE PEDESTAL

04-14-13 *

FIRST RELEASE 10-10-12 TB

TB FIRST DRAFT

**

A-Size, 63T x 12W x 8.25W12" WIDE METERED

WITHWINDOW

HINGEDDEMANDMETERRESETCOVER

PRINTPOCKET

13.13"

12.00"

63.00"


29


Enclosed Controls12" & 20" Exposed Meter Slimline Pedestal Drawings

“L” Style 20" Exposed Meter Commercial Pedestal - Slimline

“K” Style 12" Exposed Meter Commercial Pedestal - Slimline

SLIMLINEDRAWINGS


30



FOUNDATION EXTENTION


MINIMUM DEPTHALL SIDES. 6" REC

3"RECOMMENDED MIN.

10.25"ENCLOSURE

DEPTH

LBS. EA.

GRAMS

P-Size CP3A Outline

Material:

Finish:

Catalog No.:

Title:

Customer:

Paint Qty.:

USA

Drawn By:

Scale: NTS Drawing No.:

KANSAS CITY, MO

GA STAINLESS STEEL

CP3A P-SIZE

Sheet: 1 of 108/13/15

Tolerances:Unless Specified Otherwise

X.XX.XX

Date:

X.XXX

.125 ALUMINUM, 14 GA STEEL, 14

P-Size CP3A OutlineX 2.015.03.1

Third Angle

Checked By:

Approved By:

Part Wt.:

REV. DATE DESCRIPTION BY

**A

10-15-1310/12/15

FIRST RELEASE2 INCHES DEEPER

TBTB

Monday, October 12, 2015 4:05:02 PM tbennett

Shear/Die No.:

TB

ECO No.

CP-20-PADPART NUMBER

MOUNTING BASEAND HARDWARE

DEAD FRONT

SECURITY

HINGED

NON METERED SLIM LINE 43" TALL20" COMMERCIAL PEDESTAL

THROUGHDOORFOR

(IF APPLICABLE)WITH SHIELD

EXTENDSBRACKETPADLOCK

PHOTO CELLKNOCKOUT(1.75")WINDOW

PADLOCKABLEDRAW LATCH

C CSERVICECOVER

LEFT-OFF


42.

734"


12.

00"

SCALE 1 : 12

CUSTOMER

BASE DETAILMOUNTING

SECTION

SECTION C-C

UTILITYSECTION

7.0

0

5.250"

16.00"

8.0

0

14.438"PRINTPOCKET

43.

00"

20.00"

Enclosed Controls12" & 20" Unmetered Slimline Pedestal Drawings

“P” Style 20" Unmetered Commercial Pedestal - Slimline

“O” Style 12" Unmetered Commercial Pedestal - Slimline

SLIMLINEDRAWINGS


31


ENCLOSED CONTROLS

APPLICATIONEXAMPLES

Enclosed Controls Application Examples

Location: Skykomish, WA

Description: EV charging station at Stevens Pass Ski Resort. Mountain pass is on WA Highway 2, which connects Seattle to Wenatchee.

Location: Kansas City, MO

Description: Demonstrating one of the 500 plus utility-sponsored

installations of electric vehicle charging stations in Kansas City, Mo.


32




Location: North Carolina

Description: 12-inch exposed meter pedestal used for traffic applications.

Location: North Carolina

Description: Another 12-inch exposed meter slimline pedestal.

Location: Atlanta, GA

Description: Intersection near the Atlanta Braves stadium in Atlanta, Ga. uses 16-inch exposed meter pedstal to manage the intersection traffic control.

APPLICATIONEXAMPLES


33



Location: Sandusky, OH

Description: Customer had a dilapidated, unsafe wood backboard system with meter sockets, CT rated meter socket and several disconnects.

Milbank installed a secure pedestal with breakers inside. The system powers the lights and supports power to the concession stand and scoreboard.

Due to original service being overhead, the customer decided to keep the overhead service with a cost-effective termination box to feed the enclosed controls cabinet, rather than replacing the entire system. The results are safe, secure and aesthetically pleasing.

BEFORE

AFTER

APPLICATIONEXAMPLES


34



APPLICATIONEXAMPLES


Location: Huntington Beach, CA

Description: This Milbank pedestal supplies power for the Wells Fargo ATM parking lot kiosk, the irrigation controller and overhead lighting. In addition to the power distribution equipment, the pedestal has an isolated compartment for phone company lines. The Telco 24V equipment must be kept separate from the high voltage 120V equipment. Steel powder painted.


35


APPLICATIONEXAMPLES

Enclosed ControlsApplication Examples

Location: Mission Viejo, CA

Description: The Milbank pedestal is supplying power for the irrigation and pump control to its left. Also includes walkway lighting control equipment. Anodized aluminum.

Location: Costa Mesa, CA

Description: Milbank commercial pedestal

supplying power for an underground telephone equipment vault. Meter

socket, generator receptacle and surge

protection are all installed inside this pedestal.


36



APPLICATIONEXAMPLES


Location: Lacy, WA

Description: A traffic signal control cabinet stands next to

a Milbank power supply and street lighting control pedestal.

Mounted on a raised pad for winter snow conditions.

Anodized aluminum.

Location: Cleveland, OH

Description: Milbank pedestals were supplied for Rapid Transit Bus Stops to provide security and normal lighting. Pedestals looped together for efficiency.


37


APPLICATIONEXAMPLES


Location: Interstate 70, MO

Description: Milbank pedestal providing remote distribution for Dynamic Message Signs along I-70 between Kansas City and St. Louis, Mo. Operated through MoDOT, these stationary traffic control devices provide travelers with real-time traffic-related messages.


38



APPLICATIONEXAMPLES


Location: Manchester, TN

Description: Milbank pedestals used for annual outdoor music and arts festival. Operating in remote farmland, multiple pedestals provide temporary power receptacles for organizer’s use. Shown with in-use cover, which allows for security and safety for receptacles in use.


39


APPLICATIONEXAMPLES


Location: Rio Rancho, NM

Description: Battery backup pedestal that contains an inverter and batteries providing uninterrupted power to traffic signals at a busy intersection in the event of utility power failure. The Milbank pedestal supplies power for the intersection signal heads and the control cabinet using utility power and, if necessary, a backup system. The batteries can run the entire intersection traffic lights for four hours in full operation mode and an additional four hours in flashing mode. Aluminum powder painted tan.


40



APPLICATIONEXAMPLES


Location: Anaheim, CA

Description: Disneyland parking lot lighting and control. Two pedestals were provided as customer required both 120V and 480V. Steel painted green.

Location: Dubuque, IA

Description: Parking lot lighting power and control application.

Steel painted black.


41


APPLICATIONEXAMPLES



Description: Multiple pedestal locations throughout the Zona Rosa Shopping Center provide street lighting and traffic signal distribution.

Location: Atlanta, GA.

Description: Right outside the Atlanta Falcons arena

stands a Milbank exposed meter lighting pedestal.


42



APPLICATIONEXAMPLES



Description: Multiple pedestal locations at Kansas City International Airport provide lighting distribution for rental car facility parking lot.

Location: Anaheim, CA

Description: Milbank pedestal supplying power for the traffic signal cabinet (seen in picture).

Pedestal also holds the control equipment for the intersection and roadway street lighting.

Anodized aluminum.


43


APPLICATIONEXAMPLES


Location: Louisville, KY

Description: The Parklands of Floyd’s Fork multi-phase park project. Provides power and automated controls for area and walkway lighting. Includes receptacles for temporary power for concerts, festivals and other events.

Milbank Manufacturing | 4801 Deramus Ave., Kansas City, MO 64120 | 877.483.5314 | milbankworks.com ENCON 2/20

enclosed controls - milbank€¦ · enclosed controls product catalog milbank manufacturing | 4801...

Documents