encierro - interceramicusa.comwhen doing so, please be sure to order enough material of the...
TRANSCRIPT
ENCIERRODurabody Ceramic Floor Tile & Glazed Ceramic Wall Tile
interceramicusa.com
CRAFTED FOR EFFECT
Interceramic brings digitally printed tiles a step closer to reality with LumenFX. This special process replicates the infinite beauty found in nature by adding distinct and specific highlights to each individual tile. The unique ink creates depth to your space by adding the right touch of reflectivity to the tile’s design. Get the beauty of nature and the durability of tile with LumenFX from Interceramic.
Durabody ceramic tiles are made to last a lifetime, while looking like the day they were installed. That’s a lifetime of muddy paws, stomping children, cold snaps and everything else life can throw at it. The Durabody secret? Our tiles are fired at the same temperature and glazed just like porcelain. That means you get virtually the same frost resistance, water resistance and durability as porcelain at a fraction of the cost. And with designs to match your taste, Durabody tiles will make any space beautiful—inside or out.
THE CERAMIC THAT THINKS IT'S PORCELAIN
USAGE INFORMATIONTILE APPLICATIONS RESIDENTIAL LIGHT COMMERCIAL COMMERCIAL
Floors • • •
Walls/Backsplashes • • •
Countertops • • •
Exterior • • •
PLEASE NOTE: Not recommended for ramps or floor areas exposed to water or heavy grease accumulation.
FLOOR TILE TECHNICAL INFORMATIONTEST RESULTS ANSI STANDARDS ASTM #
Abrasion Resistance (PEI) Class IV/III Class 0-V ASTM C1027
Chemical Resistance Resistant As Reported ASTM C650
Bonding Strength (psi) >50 psi ≥50 psi ASTM C482
Dynamic Coefficient of Friction (DCOF)* >0.42 As Reported ANSI A 137.1-2012
Scratch Hardness 6.5 MOHS 1-10 MOHS Scale
Water Absorption <3.0% 3.0% - 7.0% ASTM C373
Breaking Strength >450 lbf. >250 lbf. ASTM C648
Frost Resistance Resistant As Reported ASTM C1026
Stain Resistance Resistant As Reported ASTM C1378
Crazing Resistance Resistant As Reported ASTM C424
Thermal Shock Resistant As Reported ASTM C484
Recycled Content (Pre-Consumer) 19.20% N/A N/A
Recycled Content (Post-Consumer) 11.40% N/A N/A
*It is important to note that Dynamic Coefficient of Friction results can vary after installation due to the presence of foreign materials, such as water, oil and other materials; the length of the human stride at the time of slip; type of floor finish and condition of shoe sole.
WALL TILE TECHNICAL INFORMATIONTEST RESULTS ANSI STANDARDS ASTM #
Abrasion Resistance (PEI) Class 0 Class 0-V ASTM C1027
Chemical Resistance Resistant As Reported ASTM C650
Bonding Strength (psi) >50 psi ≥50 psi ASTM C482
Water Absorption <20.0% 7.0% - 20.0% ASTM C373
Breaking Strength >150 lbf. >125 lbf. ASTM C648
Stain Resistance Resistant As Reported ASTM C1378
Crazing Resistance Resistant As Reported ASTM C424
ENCIERRODurabody Ceramic Floor Tile & Glazed Ceramic Wall Tile
12"x12" (2"x4")Bricklay Mosaic
12"x12" (2"x4")Bricklay Mosaic
12"x12" (2"x4")Bricklay Mosaic
12"x12" (2"x4")MixBricklay Mosaic
Variation Rating: HIGHHigh shade and texture
variation with in each carton
Variation Rating: HIGHHigh shade and texture
variation with in each carton
Installing All Encierro Colors in a Single Installation*Terra Maia Terra MaiaNemesis NemesisTelesto Telesto
DECORATIVE ACCENTS
*All three colors can be installed together for a very unique installation. When doing so, please be sure to order enough material of the individual colors to accommodate the range of color and design variation. The recommended percentages as shown in the image are 40% Terra Maia, 30% Telesto, and 30% Nemesis.
Suitable Rooms
TERRA MAIA
NEMESISTELESTO
TERRA MAIA, TELESTO, & NEMESIS
FLOOR TILE WALL TILE
WALL TILE SIZES WALL TILE TRIM (Available in all colors)
4¼"x8½"Up to 50 Faces
4¼"x8½"S4489Bullnose
4¼"x8½"S4849Bullnose
4¼"x8½"SN4849 RBullnose Corner Right
4¼"x8½"SN4849 LBullnose Corner Left
FLOOR TILE SIZES FLOOR TILE TRIM (Available in all colors)
12"x24"Up to 25 Faces
16"x16"Up to 25 Faces
3"x12" Bullnose
4¼"x8½" 4¼"x8½" 4¼"x8½"