enapter eectroye ysem · dryer 2.0 el 2.0 the optional dryer module can process up to 2nm3/hr of...
TRANSCRIPT
ENAPTERELECTROLYSER SYSTEMSENAPTER ELECTROLYSERS ARE THE PORTAL TO THE HYDROGEN ECONOMY
Our AEM electrolysers are the most cost-effective and high performance solution for hydrogen production ranging from 0.5Nm3/hr to 10Nm3/hr.
FLEXIBLE • SCALABLE • FAST TO DEPLOY
EL 2.0• 500 NL/hr or 0.5 Nm3/hr hydrogen output
• Stackable to form larger electrolyser systems
• Output pressure up to 35 bar
• Hydrogen purity 99.95%, 99.999% with optional dryer module
• High efficiency (4.8 kWh for 1 Nm3 of H2 at system level)
• Rack-mountable in standard 19” cabinet
• Native operation with Enapter EMS (remote monitoring and control system)
• Simple installation and low maintenance
• Low requirements for input water purity
Key Features
Up to four EL 2.0 modules and one optional dryer can be combined in a single 19” cabinet by Enapter or a qualified system integration partner. Please see next page for more details on the optional modules offered by Enapter.
19" Cabinet IntegrationDryer 2.0
EL 2.0
EL 2.0
EL 2.0
EL 2.0
Enapter offers integration of EL 2.0 in a weatherproof cabinet for deployment directly on the customer site.
Water Purification Module (WPM)
Enapter Water Supply System Components
Dryer 2.0
EL 2.0
The optional dryer module can process up to 2Nm3/hr of hydrogen gas from the EL 2.0 and bring the output purity to >99.999%.
It can be filled by the WMP or other clean water supply and includes a pumping system to supply the electrolysers. Size in cabinet: 8U.
Water Tank
H2 flow rate Up to 2 Nm3/hr (4 x EL 2.0)
375 W
483 x 490 x 178 mm (4U)Dimension
Operative power consumption
An optional 40L clean water tank can be integrated into the cabinet.
Enapter’s water supply system is completely optional and our customers are welcome to use any water supply system to EL that meets the specifications (<20 µS/cm).
Output water <20 µS/cm
Input water tap / rain water
Operative power consumption 200 W (20W standby)
Typical flow rate 0.2-0.4L/min
Mounted on sidewall of cabinet or other wall surface
Germany
Rheinsberger Str. 76/77, 10115 Berlin
+49 30 25814 7916
www.enapter.com
Italy
Via di Lavoria, 56/G - 56040 Crespina Lorenzana (PI)
+ 39 050 7620120
Thailand
33/4 Moo4, Phi Suea House, San Phi Suea, A. Muang, Chiang Mai, 50300
+ 66 2 107 1104
EL 2.0 Data Sheet
H2 production rate
Working pressure
Water consumption
Water specification
Water input pressure
Power supply options
Operative power consumption(at standard conditions)
Module dimensions (WxDxH)
Module weight (without water)
Ambient temperature
Ambient humidity
Peak power consumption(max power draw at anytime)
500 NL/hr
35 Bar
0.4 L/hr
<20 microS (at 25°C) µS/cm
1-2 Bar
AC 100-240 Vac, 50-60Hz
2.4 kW
483 x 490 x 354 mm (8U)
53 Kg
5–45 °C
20–95%
3.0 kW
Technical Data
Wi-Fi MQTT TLSWi-Fi MQTT TLSWi-Fi MQTT TLS
3rd Party ServiceIntegration API
HTTPS REST
HTTPS REST
HTTPS REST
MQTT Broker API Gateway
Analytic Dashboard
Enapter Cloud Engine and Billing
Time Series Database
MQTT TLS HTTPS
Web ClientCloud
Cloud/ Internet
LocalOPC UA Server
Web Client
Wi-Fi Bluetooth LE
Wi-Fi HTTPS
OPC UA TCP/IP
Gateway
Mobile Application
Mobile Application
Digital
HYDROGEN
etc.CAN Bus etc.Serial
H2 TankBattery Valve controlSystem
componentor sensor
Solar
Communication Module
Universal I/O board
Enapter ElectrolyserCommunication Module Fuel Cell
3rd party fuel cell
SNMP
ENAPTER EMSEnapter addresses the critical importance of understanding both your system and the environment it operates in. Made of a network of sensors and interfaces, the monitoring and control solution complements our electrolysers. It enables complete control and peace of mind, no matter where in the world you or your system are.
MONITORING SYSTEM
The IoT Communication Module connects analog and digital sensors, and devices to the internet to allow real time monitoring and control.
The IoT Gateway ser ves multiple functions:
- Aggregate the connections of Communication Modules to save data locally
- Mitigate connectivity issues, and minimize amount of traffic pushed to the Cloud
- Provide rule-based engine to control connected devices.
The Enapter Cloud aggregates the data from connected devices and sites. It provides online analytics, reporting and monitoring with Machine Learning algorithms.
The Mobile Application is the interface for the end- user ’s connected devices. It allows for easy system setup, management and monitoring all over the world.
Devices Log [email protected]
Modbus null
Connection Online
Sage Restart with max pressure
System Error OK
System Alarm OK
15:16 15:17 15:18 15:19 15:20
DashboardDEVICES / DEMO 1/
Download CSV < Zoom Out > Last 5 minuites
System Info
Model El1000
Name value
Electrolyser Frimware
Comm Midule Frimware 0.1
Serial Number 000000
ID Demo
System Issue
Error 2018-08-27 15:19:30
Level Type Code Fiirst Appearance Last Appearance
Alarm 2018-08-27 15:20:30
Error
Water_level_sensor
Hight_temperature
Press_switch
0
1
0 2018-08-27 15:19:30
2018-08-27 15:16:30
2018-08-27 15:16:00
2018-08-27 15:16:30
1.06 kL
1.05 kL
1.04 kL
1.03 kL
1.01 kL
1.00 kL15:16
H2 Production
H2 Production
15:17 15:18 15:19 15:20
min max avg current1.01L 1.06 kL 1.03 kL 1.04 kL
15:16
System Pressure
15:17 15:18 15:19 15:20
0.05 bar
0.04 bar
0.04 bar
0.03 bar
0.02 bar
0.01 bar
0 bar
min max avg current30.00 bar 31.00 bar 30.49 bar 30.73 bar
System Pressure
Module ALifetine
hour
N/APord. Cycles
N/A
Stack Pressure
31.0
Outlet Pressure
31.6
Status
Activity Steady
Module A Error OK
Module A Alarm OK
15:20
15:16
Pressure Stack
15:17 15:18 15:19 15:20
32.5 bar32.0 bar31.5 bar31.0 bar30.5 bar30.0 bar29.5 bar
min max avg current30.01 bar 31.00 bar 30.49 bar 30.97 bar
30.00 bar 31.99 bar 30.96 bar 31.15 barPressure Outlet
System Pressure Module Issue
Error 2018-08-27 15:19:30
Level Type Code Fiirst Appearance Last Appearance
Alarm 2018-08-27 15:20:30
Error
press_switch
hight_temp
flow_switch
0
1
0 2018-08-27 15:19:30
2018-08-27 15:16:30
2018-08-27 15:16:00
2018-08-27 15:16:30
Error Low_Water0 2018-08-27 15:20:302018-08-27 15:16:00
15:16
Voltage
15:17 15:18 15:19 15:20
35 A11.00 V
30 A10.50 V
25 A10.00 V
20 A
min max avg current10.00 V 11.00 V 10.47 V 10.35 V
32.01 A 34.00 A 33.04 A 32.51 AAmperage
Stack Part 1 Amp/Volt
15:16
Voltage
15:17 15:18 15:19 15:20
11.25 V11.00 V10.75 V10.50 V10.25 V10.00 V9.75 V
35 A
30 A
25 A
20 A
min max avg current11.00 V 12.00 V 11.53 V 11.49 V
31.00 A 32.00 A 31.51 A 31.75 AAmperage
Stack Part 1 Amp/Volt
Status
Activity Steady
Module A Error OK
Module A Alarm OK
15:20
Module BLifetine
hour
N/APord. Cycles
N/A
Stack Pressure
31.6
Outlet Pressure
31.5
Module Issue
Error 2018-08-27 15:19:30
Level Type Code Fiirst Appearance Last Appearance
Error
fan
hight_tempError
flow_switch
0
1
0 2018-08-27 15:19:30
2018-08-27 15:16:30
2018-08-27 15:16:00
2018-08-27 15:16:30
15:16
Pressure Stack
15:17 15:18 15:19 15:20
33.5 bar33.0 bar32.5 bar32.0 bar31.5 bar31.0 bar30.5 bar
min max avg current30.01 bar 32.00 bar 31.59 bar 31.59 bar
31.0` bar 32.99 bar 31.96 bar 32.25 barPressure Outlet
Pressure
15:16
Voltage
15:17 15:18 15:19 15:20
12.25 V12.00 V11.75 V11.50 V11.25 V11.00 V10.75 V
min max avg current11.00 V 12.00 V 12.52 V 11.59 V
32.00 A 34.00 A 33.00 A 32.43 AAmperage
Pressure
15:16
Voltage
15:17 15:18 15:19 15:20
14.25 V14.00 V13.75 V13.50 V13.25 V13.00 V12.75 V
min max avg current11.00 V 12.00 V 12.52 V 11.59 V
32.00 A 34.00 A 33.00 A 32.43 AAmperage
Pressure
15:16 15:17 15:18 15:19 15:20
1 rpm
0 rpm
min max avg currentFan 0Fan 2
Fan Speed
15:16 15:17 15:18 15:19 15:20
min max avg current55.0oC 57.0oC 56.9oC 55.86oCTemperature
Temperature57.5oC57.0oC56.5oC56.0oC55.5oC55.0oC54.5oC
15:16 15:17 15:18 15:19 15:20
57.5oC57.0oC56.5oC56.0oC55.5oC55.0oC54.5oC
min max avg current55.0oC 57.0oC 56.9oC 55.86oCTemperature
Temperature
15:16 15:17 15:18 15:19 15:20
1 rpm
0 rpm
min max avg currentFan 0Fan 2
Fan Speed
Dryer
Status
Stage
Dryer Error
15:16 15:17 15:18 15:19 15:20
Communication Module
Status
Connection
Modbus
Online
Null
15:16 15:17 15:18 15:19 15:20
15:16 15:17 15:18 15:19 15:20
32.5 bar
32.0 bar
31.5 bar
31.0 bar
30.5 bar
30.0 bar
29.5 bar
min max avg current30.01 bar 32.00 bar 31.59 bar 31.59 barDryer Pressure
Pressure Dryer Issue
Error 2018-08-27 15:19:30
Level Type Code Fiirst Appearance Last Appearance
Error
heater_0
heater_0
0
0 2018-08-27 15:19:30
2018-08-27 15:16:30
2018-08-27 15:16:30
15:16 15:17 15:18 15:19 15:20
57.5oC
57.0oC
56.5oC
56.0oC
55.5oC
55.0oC
54.5oC
min max avg current55.02oC 57.00oC 56.04oC 56.31oCTemperature
Temperature in Block 0
15:16 15:17 15:18 15:19 15:20
57.5oC
57.0oC
56.5oC
56.0oC
55.5oC
55.0oC
54.5oC
min max avg current55.02oC 57.00oC 56.04oC 56.31oCTemperature
Temperature in Block 0
15:16
H2 Production
WiFi Signal
15:17 15:18 15:19 15:20
0.75%
0.75%
0.75%
0.75%
0.55%
0.50%
0.45%
min max avg current0.5% 0.7% 0.6% 0.7%
15:16
Clip Temperature
Internal Clip Temperature
15:17 15:18 15:19 15:20
69.0oC
68.0oC
67.0oC
66.0oC
65.0oC
64.0oC
min max avg current65.0oC 68.0oC 66.54oC 66.0oC
Main Board
24V Power
24V Power1.0 V
0,5 V
0 V
-0.5 V
-1.0 V15:16 15:17 15:18 15:19 15:20
min max avg current5V Power
5V Power1.0 V
0,5 V
0 V
-0.5 V
-1.0 V15:16 15:17 15:18 15:19 15:20
min max avg current
Board Temperature
Board Temperature1.0 V
0,5 V
0 V
-0.5 V
-1.0 V15:16 15:17 15:18 15:19 15:20
min max avg currentLifetime
Lifetime1.00 s
750 ms
500 ms
250 ms
0 ns15:16 15:17 15:18 15:19 15:20
min max avg current
15:16
Free Memory
Internal Clip Temperature
15:17 15:18 15:19 15:20
1.13 kB
1.10 kB
1.08 kB
1.05 kB
1.02 kB
1.00 kB
min max avg current1.024 kB 1.123 kB 1.072 kB 1.064 kB Uptime
Uptime
15:17 15:18 15:19 15:20
13 min
10 min
7 min
3 min
0 ms15:16
current11.4 min
Modbus Read Time
Modbus Read Time
15:17 15:18 15:19 15:20
1.00 ms
0.75 ms
0.50 ms
0.25 ms
0 ms15:16
currentModbus Read Error
Modbus Read Error
15:17 15:18 15:19 15:20
0x2
0x115:16
current
Cloud Platform + Energy M
onitoring Gatew
ayEnergy M
anagement Platform
Devices
Edit Devices Dashboard
Demo 1DEVICES /
All (6) Online (3) Offline (3)
State Description Model Serial Num Hardware ID Production
Download: CSV XML JSON Displaying all 6 Devices
STEADY Demo1 Enapter EL1000 000000 DEMO1
ERROR El2.0 Prototype 1 / AnalogLamb0 Enapter EL 500 13 37DAC657F
MAX PRESSURE Simulator Enapter EL1000 000000 2001 -
ERROR TestStation 5 (EL500 Stack 2.0) / AnalogLamb3 Enapter 0 93F7634B15 -
Test Board 2 Enapter 0 33991ADA92 -
Test Board 1 Enapter 0 7B40954E30 -
Production
DescriptionContains
MODELContains
SERIAL NUMContains
HARDWARD IDContains
Fillter Clear FilltersElectrolyser Telemetry < Z00m Out > Mar 9,2018 11:32:30 to Mar 9,2018 11:41:04
Device Pisa office (33991ADA921521BB1C7415A0BF614AD86EBC32C9) Start RebootStop Reset Perform OTA Download CSV
Online
OK
OK
Ramp up2018-03-9 11:32:30
to2018-03-9 11:41:04
Online
9 minutes
IDModelVersionCumulative runtimeNumber of system starts
33991ADA921521BB1C7415A0BF614EL00.0.000
name value
System Info System Issue
No data to show
600 L
500 L
400 L
300 L
200 L
100 L
0 L
2018-03-09 11:36:14
H2 Production 254.46 L
11:33:00 11:33:30 11:34:00 11:34:30 11:35:00 11:35:30 11:36:00 11:36:30 11:33:00 11:37:30 11:38:00 11:38:30 11:39:00 11:39:30 11:40:00 11:40:30 11:41:00
General Charts
Device StatusOnline Production
State
Issues
05 Mar 2018 21:50
BerlinElectrolyser EL 1000
HydrogenProduction Rate
2,000 NL/hr
Current
Need help?
Outlet Pressure35 bar
Stop electrolyser
100 %21:50
General Charts
Device StatusOnline Production
State
Issues
05 Mar 2018 21:50
BerlinElectrolyser EL 1000
HydrogenProduction Rate
2,000 NL/hr
Current
Need help?
Outlet Pressure35 bar
Stop electrolyser
21:50
General Charts
Electrolyser Pressure
Issues
Range: 5 minutes
Outlet Pressure Production Rate
600 L/hr50 bar
40 bar
30 bar
20 bar
10 bar
0 bar
500 L/hr
400 L/hr
300 L/hr
200 L/hr
100 L/hr
09:30 09:35 09:40 09:45 09:50
100 %21:50
General Charts
Device StatusOnline Production
State
Issues
05 Mar 2018 21:50
BerlinElectrolyser EL 1000
HydrogenProduction Rate
2,000 NL/hr
Current
Need help?
Outlet Pressure35 bar
Stop electrolyser
100 %21:50
Electrolyser Telemetry < Z00m Out > Mar 9,2018 11:32:30 to Mar 9,2018 11:41:04
Device Pisa office (33991ADA921521BB1C7415A0BF614AD86EBC32C9) Start RebootStop Reset Perform OTA Download CSV
Online
OK
OK
Ramp up2018-03-9 11:32:30
to2018-03-9 11:41:04
Online
9 minutes
IDModelVersionCumulative runtimeNumber of system starts
33991ADA921521BB1C7415A0BF614EL00.0.000
name value
System Info System Issue
No data to show
600 L
500 L
400 L
300 L
200 L
100 L
0 L
2018-03-09 11:36:14
H2 Production 254.46 L
11:33:00 11:33:30 11:34:00 11:34:30 11:35:00 11:35:30 11:36:00 11:36:30 11:33:00 11:37:30 11:38:00 11:38:30 11:39:00 11:39:30 11:40:00 11:40:30 11:41:00
General Charts
Device StatusOnline Production
State
Issues
05 Mar 2018 21:50
BerlinElectrolyser EL 1000
HydrogenProduction Rate
2,000 NL/hr
Current
Need help?
Outlet Pressure35 bar
Stop electrolyser
100 %21:50
General Charts
Device StatusOnline Production
State
Issues
05 Mar 2018 21:50
BerlinElectrolyser EL 1000
HydrogenProduction Rate
2,000 NL/hr
Current
Need help?
Outlet Pressure35 bar
Stop electrolyser
21:50
General Charts
Electrolyser Pressure
Issues
Range: 5 minutes
Outlet Pressure Production Rate
600 L/hr50 bar
40 bar
30 bar
20 bar
10 bar
0 bar
500 L/hr
400 L/hr
300 L/hr
200 L/hr
100 L/hr
09:30 09:35 09:40 09:45 09:50
100 %21:50
General Charts
Device StatusOnline Production
State
Issues
05 Mar 2018 21:50
BerlinElectrolyser EL 1000
HydrogenProduction Rate
2,000 NL/hr
Current
Need help?
Outlet Pressure35 bar
Stop electrolyser
100 %21:50
Devices
Edit Devices Dashboard
Demo 1DEVICES /
1.06 kL
1.05 kL
1.04 kL
1.03 kL
1.01 kL
1.00 kL
1.06 kL
14:30 14:35 14:40 14:45 14:50 14:55 15:00 15:05 15:10 15:15 15:20 15:25
H2 Production
Details
STATUS
DESCRIPTION
TYPE
MODEL
SERIAL NUM
HARDWARE ID
EL FW VER
RACKTABLES RACK ID
FW VER
STATUS
Demo
electrolyser
Enapter EL1000
000000
DEMO1
EMPTY
EMPTY
0.1
STEADY
Comment (0)
Commands
Start
ESP Reboot
Add Comment
Stop Reboot
ESP OTA
Configure Network
ESP Factory Reset
Save Configuration Read Network Config
STATUS COMMAND EXECUTION STATE INTIATED AT
TIME OUT NOEL Stop
All Executed Commands
2 days ago
Commands
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
SEVERITY DESCRIPTION
sys_alarm_high_temperature
mod_b_alarm_high_temp
mod_a_alarm_low_water
mod_a_alarm_high_temp
mod_b_alarm_high_water
sys_alarm_high_temperature
2018-08-25 14:57:08 UTC
2018-08-25 14:57:08 UTC
2018-08-25 14:57:08 UTC
2018-08-25 00:11:53 UTC
2018-08-25 00:11:53 UTC
2018-08-25 00:11:53 UTC
APPEARED AT
Resolved Issues (5) of (546334)
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
SEVERITY DESCRIPTION
sys_error_water_level_sensor
mod_b_error_flow_switch
mod_a_error_flow_switch
dryer_error_press_switch
dryer_error_heater_1
sys_error_press_switch
2018-08-27 12:27:11 UTC
2018-08-27 12:27:11 UTC
2018-08-27 12:27:11 UTC
2018-08-27 12:27:11 UTC
2018-08-27 12:27:11 UTC
2018-08-27 12:27:11 UTC
APPEARED AT
2018-08-27 12:27:15 UTC
2018-08-27 12:27:15 UTC
2018-08-27 12:27:15 UTC
2018-08-27 12:27:15 UTC
2018-08-27 12:27:15 UTC
2018-08-27 12:27:15 UTC
RESOLVED ATNo comments yet.
All Issues
Germany
Rheinsberger Str. 76/77, 10115 Berlin
+49 30 25814 7916
www.enapter.com
Italy
Via di Lavoria, 56/G - 56040 Crespina Lorenzana (PI)
+ 39 050 7620120
Thailand
33/4 Moo4, Phi Suea House, San Phi Suea, A. Muang, Chiang Mai, 50300
+ 66 2 107 1104
Enapter electrolysers are installed in numerous applications around the world. More examples are available on request.
Use Cases
The Phi Suea House, a world’s first in solar- hydrogen residential stor-age
Electrolyser : 2000 NL/hrFuel Cell : 4 kWStorage : 7.5kg of hydrogen (130 kWh)
Thailand
24 hour off-grid solar and hydrogen
Enapter electrolysers are the key component in this off-grid project in the county of Melbourne
Electrolyser : 1000 NL/hrFuel cell : 2 kWStorage : 300L (0.81 Kg)
Australia
Energy independence in remote area
Enapter electrolysers are integrated into a nitrogen purification system
Electrolyser : 1000 NL/hr
Industrial onsite hydrogen generation
Portugal
Enapter electrolysers produce hydrogen to keep this refuge in the Alps operational year-round
Electrolyser : 500 NL/hrFuel Cell : 2.5 kWStorage : 5kg of hydrogen (90 kWh)
Off-grid with seasonal hydrogen energy storage
France
Enapter electrolysers generate hydrogen to power remote towers during a grid outage
Electrolyser : 1000 NL/hrFuel Cell : 5 kW
Malaysia
Telecom back up power
Enapter electrolysers provide long term backup capability for a tele-com tower in New Cairo close to the mosque
Electrolyser : 1000 NL/hrFuel Cell : 4 kWStorage : 500 L (1.35Kg)
Egypt
Telecom back up power