Enables users to monitor and control multiple Hitachi projectors from a single iPad.

The Projector Quick Connection app include four pages: Projector, Contents, Control and Settings.

Projector: Selecting the Projector page brings up an icon for every Hitachi projector connected to the iPad, with each projector’s IP address listed with the corresponding icon. Users can connect to any of them at any time by simply clicking the corresponding icon. Projectors must be equipped with a USB wireless adapter to connect to the iPad.

Contents: The Contents page allows users to display content from their iPad onto their selected Hitachi projector. This includes documents, pictures and web pages.

Control: The Control page provides access to control functions for each projector — it’s like having a remote control on your iPad. Functions include Standby/On, Audio Mute, Blank and Freeze. The input source selection area allows users to choose from two com- puter ports, two USB ports, HDMI, Video, S-Video and LAN.

Settings: The Settings page provides access to advance functions including Display mode, which allows either full Image mode or 4 iPads mode (which can display content from up to 4 iPads at the same time). Presenter mode enables the user to invite others to present or prevent another iPad from connecting to the projector.

To use this application, optional USB Wireless Adapter (USBWL11N) is required.

Delivering even greater versatility and access for users of its 3LCD projectors, Hitachi offers the Projector Quick Connection iPad application.

Search keywords:1. Projector quick connect2. Hitachi Consumer Electronics3. Projectors

Hitachi Projector CompatibilityCP-X2015WN CP-WU8440 CP-WX3014WN

CP-X2515WN CP-X8160 CP-X3021WN

CP-X3015WN CP-WX8255 CP-X2521WN

CP-X4015WN CP-WU8450 CP-X2021WN

CP-WX2515WN CP-SX8350 CP-X11WN

CP-WX3015WN CP-X2514WN CP-WX12WN

CP-X8150 CP-X3014WN CP-A222WN

CP-WX8240 CP-X4014WN

Hitachi America, Ltd. 900 Hitachi Way, Chula Vista, CA 91914 Toll Free: 1.800.HITACHI • Email: dmd.info@hal.hitachi.com Web: hitachi-america.us/projectors

HI0100-08/12 WEB All specifications subject to change without notice.iPad is a registered trademark of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. ©2012 Hitachi America, Ltd. All Rights Reserved.

Hitachi Projector Quick Connection iPad® App Product Information

Getting Started

1. Go to the Apple® App StoreSM. You can find the free app by using the following key words or the title of the app:

A. Projector (it takes some searching)

B. Hitachi Consumer Electronics

C. Projector Quick Connection (title)

2. Download the app on to your iPad

3. Be sure the optional Hitachi USB wireless adapter (USBWL11N) is installed on the projector

4. Connecting by ADHOC mode (peer to peer) with DHCP on

Projector Settings

First, go to ADVANCED MENU, then NETWORK, then WIRELESS SETUP.

Check if the DHCP is set to ON. If it’s OFF, please change to ON.

Go to WIRELESS INFORMATION.

Check if the MODE is set to ADHOC. If it’s INFRASTRUCTURE, please go to the WIRELESS SETUP and change it to ADHOC.

Check what is set for your SSID. For the default, the WIRELESS is set.

Please check the IP ADDRESS. When the DHCP is ON, the IP ADDRESS will automatically be allocated. For example as 169.254.200.17.

If the IP ADDRESS is showing 0.0.0.0, please wait momentarily until it is allocated.

Hitachi Projector Quick Connection iPad® App Quick Start Guide

A fast and easy step-by-step guide for installing your Hitachi Projector Quick Connection iPad App.

1.800.HITACHIdmd.info@hal.hitachi.com hitachi-america.us/projectors

Hitachi Projector Quick Connection iPad® App Quick Start Guide

Hitachi America, Ltd. 900 Hitachi Way, Chula Vista, CA 91914 Toll Free: 1.800.HITACHI • Email: dmd.info@hal.hitachi.com Web: hitachi-america.us/projectors

HI0107-09/12 WEB All specifications subject to change without notice.iPad is a registered trademark of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. ©2012 Hitachi America, Ltd. All Rights Reserved.

iPad Settings

Click SETTINGS, and choose Wi-Fi.

Click the projector’s SSID, for example wireless shown in [Choose a Network...].

Click the right arrow.

Please check if DHCP is chosen. If not, please click on the DHCP.

When the DHCP is ON, the IP ADDRESS will automatically be allocated. For example as 169.254.30.244.

If nothing is shown on the IP ADDRESS, please go back to the Wi-Fi NETWORK, wait momentarily, and click the right arrow again.

Click the PJ Connection icon.

The orange icon with the name of the projector and IP address will be shown in the Select Projector screen.

Wait 15 to 20 seconds before opening the app or the projector icon will not appear.

Click this icon, and the color will change to blue.

Now you can go to the Control tab or the Content tab.

The first time you connect your iPad and projector the projector needs to be on.

After your successful first launch you will be able to turn on the projector via the iPad.