en1154 specification · of closer from door, which provides greater safety, smoother operation and...
TRANSCRIPT
EN1154 SPECIFICATION
Version: 2015.10
UNISON HARDWARE, INC.www.inoxproducts.com
TABLE OF CONTENTS
Disclaimer: All information in this catalog has been deemed accurate as of the date of printing. We are continuously improving and expanding our line in an effort to offer our clients the finest quality products and services. Therefore, Unison Hardware, Inc., reserves the right to alter this information or correct printing errors at any time. C 2015 Unison Hardware, Inc. All Rights Reserved.
EN1154 Standard Explained ………………………………………………
How to Order ………………………………………………………………
DC4025 Series Door Closer …………………………………………………
DC3003 Series Door Closer …………………………………………………
DC2003 Series Door Closer …………………………………………………
Page 1
Page 3
Page 4
Page 8
Page 12
SCOPEThe European standard provides details of controlled door closing device on product types, classification by use, test cycles, door mass, corrosionresistance, as well as definitions, product performance requirements, test apparatus, test methods and marking of products
CLASSIFICATIONEN1154 classifies door furniture by using an 6 digit coding system. A similar classification applies to all building hardware product standards so that complementary items of hardware can be specified to, for instance, a common level of corrosion resistance, category of use, etc. Each digit refers to a particular feature of the product measured against the standard's performance requirements.
EN1154: 1997Digit 1Category of use
For all internal and external doors for use by the public, and others, with little incentive to take care, i.e. where there is some chance of misuse of the door.- grade 3: For closing doors from at least 105o open- grade 4: For closing doors from 180o openNote 1: Grade 4 classification assumes standard installation according toe the manufacturer's instructions.Note 2: For applications subject to extremes of abuse, or for particular limitations of opening angle, door closers incorporating a backcheck function or provision of a separate door stop should be considered.
Digit 2Number of test cycles
Only one test duration is identified for door closers manufactured to this standard:- grade 8: 500, 000 test cycles
Digit 3Test Door mass/size
Seven test door mass grades and related dorr closer power sizes are identified according to table 1 of this standard. Where a door closer provides a range of power sizes both the minimum and the maximum sizes shall be identified.Table 1
Door closer power size
Recommended door leaf width max. (mm)
Test door mass (kg)
1 <750 202 850 403 950 604 1, 100 805 1, 250 1006 1, 400 1207 1, 600 160
Controlled Door Closing Devices toEN1154EN1154: 1997 + A1: 2003
Version: 2015.10 OVERHEAD DOOR CLOSER
01Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USATel: +1.916.388.1888 Fax: +1.916.388.8322 Email: [email protected] Web: www.inoxproducts.com
DC4025/DC3003/DC2003 Series Door Closer are tested and certified to the following classificationDC4025 Series Door Closer
4 84
1 1 32
DC3003/DC2003 Series Door Closer4 8 3 1 1 3
DC4025/DC3003/DC2003 Door CloserDC4025 Series Door Closer
4 84
1 1 32
DC3003/DC2003 Door Closer
4 8 3 1 1 3
DC4025/DC3003/DC2003 Door CloserDC4025 Series Door Closer
844
1 1 32
DC3003/DC2003 Door Closer
84 3 1 1 3
DC4025/DC3003/DC2003 Door CloserDC4025 Series Door Closer
44 8 1 1 3
2
DC3003/DC2003 Door Closer
34 8 1 1 3
OVERHEAD DOOR CLOSER Version: 2015.10
02 Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USATel: +1.916.388.1888 Fax: +1.916.388.8322 Email: [email protected] Web: www.inoxproducts.com
Note 1: The door widths given are for standard installations. In the case of unusually high or heavy doors, windy or draughty conditions, or special installations, a larger power size of door closer should be used.Note 2: The test door masses shown are only related to door closer power sizes for the purpose of the test procedure. These test door masses are not intended to indicate maximum values for actual use.
Digit 4Fire behaviour
Two grades of fire behaviour are identified for door closing devices manufactured to this standard: - grade 0: Not suitable for use on fire/smoke door assemblies- grade 1: Suitable for use on fire/smoke door assemblies, subject to satisfactory assessment of the contribution of the door closer to the fire resistance of specified fire/smoke assemblies. Such assessment is outside the scope of this European Standard (See EN 1634-1).
Digit 5Safety
All door closers are required to satisfy the Essential Requirement of safety in use. Therefore only grade 1 is identified.
Digit 6Corrosion resistance
Five grades of corrosion resistance are identified according to EN 1670:- grade 0: No defined corrosion resistance- grade 1: Mild resistance- grade 2: Moderate resistance- grade 3: High resistance- grade 4: Very high resistance
DC4025/DC3003/DC2003 Door CloserDC4025 Series Door Closer
14 84
1 32
DC3003/DC2003 Door Closer
14 8 3 1 3
DC4025/DC3003/DC2003 Door CloserDC4025 Series Door Closer
34 84
1 12
DC3003/DC2003 Door Closer
34 8 3 1 1
CE MARKINGDoor closers intended for use on fire resisting doors and smoke control doors are covered by a Construction Products Directive mandate issued by the European Commission. Consequently, this standard is regarded as a "harmonised" standard and compliance with it, supported by suitable evidence, allows the application of the CE mark.
As closers for fire/smoke doors have a critical safety function, application of the CE mark will require the involvement of a notified certification body to provede verification of the compliance claims. This will involve initial type-testing of the product to EN 1154, initial inspection of the manufacturer's factory production control and continuing surveillance and approval of the factory production contol. On satisfactory fulfilment of these tasks, the notified body issues an EC Certificate of Conformity which then permits the manufacturer to declare compliance and affix the CE marking to his product.
Product IdentificationDC4025 BC -AL -FMT
Door Closer Series:DC4025DC3003DC2003
Finish:-AL = Aluminum Painted-WH = White Painted-BK = Black Painted-GD = Gold Painted
Cover:Blank = Less Cover (Standard)FMT = Door Closer with Metal Cover**Available only with DC3003 and DC4025
Function:Blank = Door Closer with Standard ArmBC = Door Closer with Back CheckST = Door Closer with Slide-track Arm*HO = Door Closer with Door Hold Open Arm*BC/HO/ST are not available for DC2003
How to Order
03Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USATel: +1.916.388.1888 Fax: +1.916.388.8322 Email: [email protected] Web: www.inoxproducts.com
OVERHEAD DOOR CLOSERVersion: 2015.10
04 Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USATel: +1.916.388.1888 Fax: +1.916.388.8322 Email: [email protected] Web: www.inoxproducts.com
Specification and Features
- Full Rack and Pinion Construction Heat-treated rack and pinion immersed in high grade oil to give a smooth action and minimum wear and tear
- Adjustable Power Size (EN2 – EN5) Power Size can be adjustable by spring valve according to door width and weight variation.
DC4025 EN2 EN3 EN4 EN5Маx. Door Width (mm) 850 950 1100 1250Маx. Door Weight (kgs) 40 60 50 100Маx. Opening Angle 180° 180° 150° 120°
- Non Handed DC4025 can be universally fitted on both left and right handed swing door
- Flexible Mounting Position DC4025 can be installed on both pull and push side of door and can be fitted and both door and frame.
- Adjustable Latch and Closing Speed DC4025 is supplied with hydraulic controlled valves to adjust latch and closing speed.
- Adjustable Backcheck Backcheck feature set and adjusted by an independent valve to protect doorset from violent opening.
MaterialAluminum Alloy Pressure Die-Cast
ApplicationINOX DC4025 is a mainstream overhead door closer suitable for both interior and exterior door type.
DC4025 Series Door Closer
Standards and CertificationSuccessfully type-tested for conformity to all of the requirements of EN1154:1996/A1:2002/AC:2006 including the additional requirements for latch action /backcheck /adjustable closing force.
Successfully passed 60 minutes fire test of metal door assemblies to EN1634:2008
CE Marking: CE Declaration of Conformity available on request
All tests performed independently and certified by Intertek Testing and Certification Ltd. at UK
EN1154 Classification
4 84
1 1 32
Finishes- Silver - White - Black- Gold- Other finishes available on request
70°
15°
0°
110°
180°
For Slide-track Arm Mounting
Back Check
For Regular and Parallel Arm Mounting
Closing speed
Latching speed
* Dimensions in mm
23052
19 5118
.5
248
OVERHEAD DOOR CLOSER Version: 2015.10
05Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USATel: +1.916.388.1888 Fax: +1.916.388.8322 Email: [email protected] Web: www.inoxproducts.com
DC4025 Series Door Closer
Optional Features- Delayed Action Additional adjustable valve can be included to allow additional time before closing.
- Closer Cover: DCCV40 Metal cover available to cover mounting screw holes and create a clean appearance
- Door Hold-Open Hold-Open arm allows the door to be held open at a preset angel for special occasion
- Slide-track Arm Mounting Slide-track arm mounting allows minimum overall projection of closer from door, which provides greater safety, smoother operation and more appealing aesthetics
DC4025 Item List
Item No. Description
DC4025 Door Closer with Standard Arm and BackCheck
DC4025DA DC4025 with Delayed Action
DC4025ST DC4025 with Slide-track Arm
DC4025DAST DC4025 with Slide-track Arm and Delayed Action
DC4025HO DC4025 with Hold Open Arm
-FMT Add FMT suffix for order with DCCV40 cover
*Dimensions in mm
254 45.5
5465°
0° 180°
Delay
OVERHEAD DOOR CLOSERVersion: 2015.10
Door Frame Mounting (Push Side)
Mounting Diagrams
06 Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USATel: +1.916.388.1888 Fax: +1.916.388.8322 Email: [email protected] Web: www.inoxproducts.com
Door Leaf Mounting (Pull Side)
DC4025 Series Door Closer
* Dimensions in mm
* Dimensions in mm
201 102
230116.5
108.5
281 45
4660
20
52.5
19287
230
102 20145 281
52.5 19
6046
116.5
108.5
287
OVERHEAD DOOR CLOSER Version: 2015.10
Parallel Arm Mounting (Pull Side)
Mounting Diagrams
Slide Track Mounting (Pull Side)
DC4025 Series Door Closer
* Dimensions in mm
* Dimensions in mm
07Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USATel: +1.916.388.1888 Fax: +1.916.388.8322 Email: [email protected] Web: www.inoxproducts.com
170
230 95
121
68
330
45
7819
108.
5
414
52
32
39.5
29
251955
.5
57.7
65.5 230
20
OVERHEAD DOOR CLOSERVersion: 2015.10
Material
Aluminum Alloy Pressure Die-Cast
Application
INOX DC3003 is an overhead door closer suitable for standard to medium weight doors for both interior or exterior application.
Standards and Certification
Successfully type-tested for conformity to all of the requirements of EN1154:1996/A1:2002/AC:2006 including the additional requirements for latch action /backcheck /adjustable closing force.
Fire Safety: Successfully tested on fire door assemblies according to EN1634-1
CE Marking: CE Declaration of Conformity available on request
Fire Safety: Successfully tested on fire door assemblies according to UL 10C
All tests performed independently and certified by Intertek Testing and Certification Ltd. at UK
Specifications and Features
- Slim DesignDC3003 has a compact size with minimized projection allowing installation to door's adjacent return wall
- Full Rack and Pinion ConstructionHeat-treated rack and pinion immersed in high grade oil for smooth action and minimum wear and tear
- Selectable Power Size by Mounting Position (EN2, 3, 4)DC3003 EN2 EN3 EN4
Max. Door Width (mm) 850 950 1050
Мax. Door Weight (kgs) 40 60 75
Мax. Opening Angle 180° 180° 100°
- Non HandedDC3003 can be universally fitted on both left and right handed swing doors
- Flexible Mounting PositionDC3003 can be installed on both pull and push side of door and can be fitted on both door and frame
- Adjustable Latching and Closing Speed DC3003 is supplied with hydraulic controlled valves to adjust latching and closing speed
Finishes
In Stock:- AL = Aluminum Painted- WH = White Painted- BK = Black Painted- GD = Gold Painted Other finishes available on request
EN1154 Classification
4 8 3 1 1 3
DC3003 Series Door Closer
08 Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USATel: +1.916.388.1888 Fax: +1.916.388.8322 Email: [email protected] Web: www.inoxproducts.com
Closing speed
Closing speed
Latching speed
Latching speed
* Dimensions in mm
220
200
19 52.5
43.5
12.5
OVERHEAD DOOR CLOSER Version: 2015.10
DC3003 Series Door Closer
Optional Features
- Adjustable BackcheckBackcheck feature set and adjusted by an independent valve to protect doorset from violent opening.
- Closer Cover: DCCV30Metal cover available to cover mounting screw holes and create a clean appearance.
- Slide-track Arm MountingSlide-track arm mounting allows minimum overall projection of closer from door, which provides greater safety, smoother operation and more appealing aesthetics.
- Door Hold-OpenHold-Open arm allows door to be held open at a preset angle
70o
110o
Back Check
For Slide-track Arm Mounting
180o0o For Regular and Parallel Arm Mounting
DC3003 Item List
Item No. Description
DC3003 Door Closer with Standard Arm
DC3003BC DC3003 with BackCheck
DC3003ST DC3003 with Slide-track Arm
DC3003BCST DC3003 with Slide-track Arm and BackCheck
DC3003HO DC3003 with Hold Open Arm
-FMT Add FMT suffix for order with DCCV30 cover
50
22 4665
271.5
09Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USATel: +1.916.388.1888 Fax: +1.916.388.8322 Email: [email protected] Web: www.inoxproducts.com
OVERHEAD DOOR CLOSERVersion: 2015.10
Mounting Diagrams
Door Leaf Mounting (Pull Side)
Door Frame Mounting (Push Side)
DC3003 Series Door Closer
* Dimensions in mm
* Dimensions in mm
10 Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USATel: +1.916.388.1888 Fax: +1.916.388.8322 Email: [email protected] Web: www.inoxproducts.com
C4 5A
D
E 200 250
max. 15.5 (EN2)max. 19 (EN3/4)
EN424562
294160170
EN317562
22490
100
EN21758122490100
ABCDE
60
2419
50 33.5
B
OVERHEAD DOOR CLOSER Version: 2015.10
Mounting Diagrams
Parallel Arm Mounting (Pull Side)
Slide Track Mounting (Pull Side)
All dimensions showing below are in mm.
DC3003 Series Door Closer
* Dimensions in mm
* Dimensions in mm
11Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USATel: +1.916.388.1888 Fax: +1.916.388.8322 Email: [email protected] Web: www.inoxproducts.com
150
200 121
6845
50EN3
7019
17
100
200 43
1919
20
110EN3
39.5
56.8
29
414
OVERHEAD DOOR CLOSERVersion: 2015.10
12 Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USATel: +1.916.388.1888 Fax: +1.916.388.8322 Email: [email protected] Web: www.inoxproducts.com
Material
Aluminum Alloy Pressure Die-Cast
Application
INOX DC2003 is a cost effective overhead door closer suitable for light duty commercial application.
Standards and Certification
Successfully type-tested for conformity to all of the requirements of EN1154:1996/A1:2002/AC:2006 including the additional requirements for latch action/backcheck/adjustable closing force.
Fire Safety: Successfully tested on fire door assemblies according to EN1634-1
CE Marking: CE Declaration of Conformity available on request
All tests performed independently and certified by Intertek Testing and Certification Ltd. at UK
EN1154 Classification
4 8 3 1 1 3
Available Finishes
- AL = Aluminum Painted- WH = White Painted- BK = Black Painted- GD = Gold Painted- Other finishes available on request
Specification and Features
- Rack and Pinion ConstructionHeat-treated rack and pinion immersed in high grade oil to give a smooth action and minimum wear and tear
- Fixed Power Size EN3
DC2003 EN3
Max. Door Width (mm) 950
Мax. Door Weight (kgs) 60
Мax. Opening Angle 180°
- Non HandedDC2003 can be universally fitted on both left and right handed swing door
- Adjustable Latching and Closing Speed DC2003 is supplied with hydraulic controlled valves to adjust latching and closing speed
DC2003 Series Door Closer
15°
0° 180°Latching speed
Closing speed
DC2003 Item List
Item No. Description
DC2003 Door Closer with Standard Arm
Latching speed Closing speed
* Dimensions in mm
165180
42.8
62.5
17.5
19
OVERHEAD DOOR CLOSER Version: 2015.10
DC2003 Series Door Closer
13Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USATel: +1.916.388.1888 Fax: +1.916.388.8322 Email: [email protected] Web: www.inoxproducts.com
Mounting Diagrams
Door Leaf Mounting (Pull Side)
Door Frame Mounting (Push Side)
Parallel Arm Mounting (Pull Side)
* Dimensions in mm
* Dimensions in mm
* Dimensions in mm
210
16554.5
45
5050
1919
38.5
144.5 79.5
23562EN3
62235
54.5
165
45.9
1950
79.5 144.545 210
42.5
EN3
90 121165
116
6845
1970
EN3
OVERHEAD DOOR CLOSERVersion: 2015.10
Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USATel: +1.916.388.1888 Fax: +1.916.388.8322 Email: [email protected]://www.inoxproducts.com
Please visit our website http://www.inoxproducts.com
for more technical and new product information.