Rev: 20121106

Thanks for your purchase!

7 7days no reason returned.15 15days replacemnet.

1 1 year free repair maintenance.

Tel: 13316560709 QQ 25199527

3DHarryLEO 3D Printer User Manual

SDCopy the files from SD card to your

computer. SD .Find the SD card and card reader in the bag.

. Plug in the USB of computer.

SD ,Copy the files from SD card to your computer.

USBPlug the power line into the wall outlet. Connect the USB cable.

.Power on. USB . Install the driver.

TipsUSB

pronterface.exeRun the pronterface.exe.

COM3 COM11

Select the serial port number.

115200Set the baud rate, 115200.

ConnectClick the Connect button.

Have a look of the information

.Right one should be same as right side.

Connecting...

SET Check temp 230

110 ABS Need to set the preheat temperature, 230 and 110

as below, and check the temp rise to the setting value.

.The first time need long time

to heating up the heated bed. Pinch force spring of the extruder. Insert the filament to the extruder.

Make sure it was insert to the

nozzle.

.Try to extrude

, After the temperature was reached setting value

Extrude Click the Extruder button.

have a look the nozzle and extruder, maybe you need click more times of the button.

Selct a file to print

.The settings was adjustment to the best. Do not change them unless you know the mean.

File20mmbox.stl. Open a file 20mmbox.stl.

It will give you the message about need how many time and how many filament.

Print .Click Print button to print.

Printing in process

.The extruder will come to the home.

. Please watch the status.

Z .Adjust the endstop to make sure the nozzle at the real home position.

Congratulations!

The first printing is complete !

http://www.harryleo.cn

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16