en switch v6 ch01
TRANSCRIPT
© 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Course v6 Chapter # 1
Chapter 1: Analyzing The Cisco Enterprise Campus Architecture
CCNP SWITCH: Implementing IP Switching
Chapter # 2 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Chapter 1 Objectives
Describe common campus design options and how design
choices affect implementation and support of a campus
LAN.
Describe the access, distribution, and core layers.
Describe small, medium, and large campus network
designs.
Describe the prepare, plan, design, implement, operate,
optimize (PPDIOO) methodology.
Describe the network lifecycle approach to campus design.
Chapter # 3 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Introduction to Enterprise Campus Network Design
Chapter # 4 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Enterprise Network
Core (Backbone)
Campus
Data Center
Branch
WAN
Internet Edge
Chapter # 5 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Regulatory Standards (U.S.)
There may be several legal regulations that have an impact
on a network’s design.
US regulations on networks include:
• Health Insurance Portability and Accountability Act (HIPAA)
• Sarbanes-Oxley Act
• “Records to Be Preserved by Certain Exchange Members, Brokers
and Dealers”: Securities and Exchange Commission (SEC) Rule 17a-
4
Chapter # 6 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Campus Designs
Modular - easily supports growth and change. Scaling the
network is eased by adding new modules in lieu of
complete redesigns.
Resilient - proper high-availability (HA) characteristics
result in near-100% uptime.
Flexible - change in business is a guarantee for any
enterprise. These changes drive campus network
requirements to adapt quickly.
Chapter # 7 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Multilayer Switches in Campus Networks
Hardware-based routing using
Application-Specific Integrated
Circuits (ASICs)
RIP, OSPF, and EIGRP are
supported
Layer 3 switching speeds
approximate that of Layer 2
switches
Layer 4 and Layer 7 switching
supported on some switches
Future: Pure Layer 3
environment leveraging
inexpensive L3 access layer
switches
Chapter # 8 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Cisco Switches
Catalyst 6500 Family – used in campus, data center, and core as well as WAN and branch
• Up to 13 slots and 16 10-Gigabit Ethernet interfaces
• Redundant power supplies, fans, and supervisor engines
• Runs Cisco IOS
Catalyst 4500 Family – used in distribution layer and in collapsed core environments
• Up to 10 slots and several 10-Gigabit Ethernet interfaces
• Runs Cisco IOS
Catalyst 3560 and 3750 Families – used in fixed-port scenarios at the access and distribution layers
Nexus 2000, 5000, and 7000 Families – NX-OS based modular data center switches
Chapter # 9 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Multilayer Switching Miscellany
ASIC-based (hardware)
switching is supported even
with QoS and ACLs,
depending on the platform;
6500 switches support
hardware-based switching
with much larger ACLs than
3560 switches.
ASICs on Catalyst switches
work in tandem with ternary
content addressable memory
(TCAM) and packet-matching
algorithms for high-speed
switching.
Catalyst 6500 switches with
a Supervisor Engine 720 and
a Multilayer Switch Feature
Card (MSFC3) must
software-switch all packets
requiring Network Address
Translation.
Unlike CPUs, ASICs scale in
switching architectures.
ASICs integrate onto
individual line modules of
Catalyst switches to
hardware-switch packets in a
distributed manner.
Chapter # 10 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Traffic Types
Network Management – BPDU, CDP, SNMP, RMON, SSH
traffic (for example); low bandwidth
IP Telephony – Signaling traffic and encapsulated voice traffic;
low bandwidth
IP Multicast – IP/TV and market data applications; intensive
configuration requirements; very high bandwidth
Normal Data – File and print services, email, Internet browsing,
database access, shared network applications; low to medium
bandwidth
Scavenger Class – All traffic with protocols or patterns that
exceed normal data flows; less than best-effort traffic, such as
peer-to-peer traffic (instant messaging, file sharing, IP phone
calls, video conferencing); medium to high bandwidth
Chapter # 11 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Client-Server Applications
Mail servers
File servers
Database servers
Access to applications is
fast, reliable, and secure
Chapter # 12 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Client-Enterprise Edge Applications
Servers on the enterprise
edge, exchanging data
between an organization
and its public servers
Examples: external mail
servers, e-commerce
servers, and public web
servers
Security and high
availability are paramount
Chapter # 13 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Service-Oriented Network Architecture (SONA)
Application Layer – business and collaboration applications; meet business
requirements leveraging interactive services layer.
Interactive Services Layer – enable efficient allocation of resources to
applications and business processes through the networked infrastructure.
Networked Infrastructure Layer – where all IT resources interconnect.
Chapter # 14 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Borderless Networks
Enterprise architecture launched by Cisco in October 2009.
Model enables businesses to transcend borders, access
resources anywhere, embrace business productivity, and
lower business and IT costs.
Focuses more on growing enterprises into global
companies.
Technical architecture based on three principles:
• Decoupling hardware from software
• Unifying computation, storage, and network
• Policy throughout the unified system
Provides a platform for business innovation.
Serves as the foundation for rich-media communications.
Chapter # 15 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Enterprise Campus Design
Chapter # 16 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Building Access, Building Distribution, and Building Core Layers
Building Core Layer: high-
speed campus backbone
designed to switch packets as
fast as possible; provides high
availability and adapts quickly to
changes.
Building Distribution Layer:
aggregate wiring closets and
use switches to segment
workgroups and isolate network
problems.
Building Access Layer: grant
user access to network devices.
Chapter # 17 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Core Layer
Aggregates distribution layer switches.
Implements scalable protocols and technologies and load
balancing.
High-speed layer 3 switching using 10-Gigabit Ethernet.
Uses redundant L3 links.
Chapter # 18 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Distribution Layer
High availability, fast path recovery, load balancing, QoS, and security
Route summarization and packet manipulation
Redistribution point between routing domains
Packet filtering and policy routing to implement policy-based connectivity
Terminate VLANs
First Hop Redundancy Protocol
Chapter # 19 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Access Layer
High availability – supported by many hardware and software features, such
as redundant power supplies and First Hop Redundancy Protocols (FHRP).
Convergence – provides inline Power over Ethernet (PoE) to support IP
telephony and wireless access points.
Security – includes port security, DHCP snooping, Dynamic ARP inspection, IP
source guard.
Chapter # 20 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Small Campus Network
<200 end devices
Collapsed core
Catalyst 3560 and 2960G switches for access layer
Cisco 1900 and 2900 routers to interconnect branch/WAN
Chapter # 21 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Medium Campus Network
200-1000 end devices
Redundant multilayer switches at distribution layer
Catalyst 4500 or 6500 switches
Chapter # 22 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Large Campus Network
>2000 end users
Stricter adherence to core, distribution, access delineation
Catalyst 6500 switches in core and distribution layers
Nexus 7000 switches in data centers
Division of labor amongst network engineers
Chapter # 23 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Data Center Infrastructure
Core layer – high-speed packet switching backplane
Aggregation layer – service module integration, default gateway
redundancy, security, load balancing, content switching, firewall, SSL
offload, intrusion detection, network analysis
Access layer – connects servers to network
Chapter # 24 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
PPDIOO Lifecycle Approach to Network Design and Implementation
Chapter # 25 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
PPDIOO Phases
Prepare – establish organizational requirements.
Plan – identify initial network requirements.
Design – comprehensive, based on planning outcomes.
Implement – build network according to design.
Operate – maintain network health.
Optimize – proactive management of network.
Chapter # 26 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Lifecycle Approach
Lowering the total cost of
network ownership
Increasing network
availability
Improving business agility
Speeding access to
applications and services
Identifying and validating
technology requirements
Planning for infrastructure
changes and resource
requirements
Developing a sound network design aligned with technical requirements and business goals
Accelerating successful implementation
Improving the efficiency of your network and of the staff supporting it
Reducing operating expenses by improving the efficiency of operational processes and tools
Chapter # 27 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Lifecycle Approach (1)
Benefits:
• Lowering the total cost of network ownership
• Increasing network availability
• Improving business agility
• Speeding access to applications and services
Lower costs:
• Identify and validate technology requirements
• Plan for infrastructure changes and resource requirements
• Develop a sound network design aligned with technical requirements and business goals
• Accelerate successful implementation
• Improve the efficiency of your network and of the staff supporting it
• Reduce operating expenses by improving the efficiency of operational processes and tools
Chapter # 28 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Lifecycle Approach (2)
Improve high availability:
• Assessing the network’s security state and its capability to support the proposed design
• Specifying the correct set of hardware and software releases, and keeping them operational and current
• Producing a sound operations design and validating network operations
• Staging and testing the proposed system before deployment
• Improving staff skills
• Proactively monitoring the system and assessing availability trends and alerts
Gain business agility:
• Establishing business requirements and technology strategies
• Readying sites to support the system that you want to implement
• Integrating technical requirements and business goals into a detailed design and demonstrating
• that the network is functioning as specified
• Expertly installing, configuring, and integrating system components
• Continually enhancing performance
Accelerate access to network applications and services:
• Assessing and improving operational preparedness to support current and planned network technologies and services
• Improving service-delivery efficiency and effectiveness by increasing availability, resource capacity, and performance
• Improving the availability, reliability, and stability of the network and the applications running on it
• Managing and resolving problems affecting your system and keeping software applications current
Chapter # 29 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Planning a Network Implementation
Implementation Components:
• Description of the step
• Reference to design documents
• Detailed implementation guidelines
• Detailed roll-back guidelines in case of failure
• Estimated time needed for implementation
Summary Implementation Plan – overview of
implementation plan
Detailed Implementation Plan – describes exact steps
necessary to complete the implementation phase, including
steps to verify and check the work of the network engineers
implementing the plan
Chapter # 30 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Chapter 1 Summary
Evolutionary changes are occurring within the campus network.
Evolution requires careful planning and deployments based on hierarchical designs.
As the network evolves, new capabilities are added, usually driven by application data flows.
Implementing the increasingly complex set of business-driven capabilities and services in the campus architecture is challenging if done in a piecemeal fashion.
Any successful architecture must be based on a foundation of solid design theory and principles. The adoption of an integrated approach based on solid systems design principles is a key to success.
Chapter # 31 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Lab 1-1 Clearing a Switch
Lab 1-2 Clearing a Switch Connected to a Larger Network
Chapter 1 Labs
Chapter # 32 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Resources
www.cisco.com/en/US/products
Chapter # 33 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public