en · 2020. 5. 9. · n/mm2 open time (en 1346): ≥ 0.5 n/mm2 after 20 minutes determination of...
TRANSCRIPT
![Page 1: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/1.jpg)
EN
![Page 2: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/2.jpg)
3
Index
Zherorisk® Project 4
Why EVO 7
Starlike® EVO 24
Over 150 finishes 54
Technical data 60
Advantages 63
Packaging 64
Application phases 66
You may also need 66
![Page 3: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/3.jpg)
4
Zherorisk® is a research initiativeby Litokol’s R&D divisionwith the participation of the Universityof Modena and Reggio Emilia, the DICAM (Department of Civil, Chemical, Environmental, and Materials Engineering) of Bolognaand external research institutes,on raw materials and waysof combining them,aimed at developingan innovative generationof environmentally-friendly building products with “zero risks”.
breathe safe air
![Page 4: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/4.jpg)
CO2
5
Certifications
EC1 PLUSLitokol products with Zherorisk® technology come with EMICODE EC1 PLUS certification and labelling, for “products with a very low volatile organic compound emission rate” in compliance with the guidelines issued by GEV (association for the control of building material emissions), with much lower values than the limit values.
Émission dans l’air intérieur “Émission dans l’air intérieur” is the mandatory labelling of building products or wall and floor covering products used in buildings, in accordance with the French regulation on the characteristics of volatile pollution emissions (VOC) for the product. The product emission level is indicated by a class ranging from A+ (very low emissions) to C (high emissions), according to the same principle used for electrical appliances.
Zero risk in transportation
✓ Product not subject to restrictions for road, sea, air and rail transport ✓ No ADR restrictions for road transport✓ No IMO containers for transport by sea
Zero risk for the environment
✓ Renewable primary materials✓ Recycled materials✓ Lower energy consumption✓ Lower CO² emissions✓ Reduced consumption of basic materials
Zero risk for the user
✓ Given that most VOC emission occurs during application, the use of products with ultra-low VOC emission increases the safety of professional users;
the lack of pungent and unpleasant odours makes the workplace much more comfortable.
✓ Non corrosive✓ Non toxic✓ Non-hazardous to the environment
Zero risk for homes
✓ Very low VOC emissions:safeguarding the quality of air in homes and the health of those who live there.
![Page 5: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/5.jpg)
6
![Page 6: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/6.jpg)
7
why
With Zherorisk® technologyStarlike® grout for joints becomes Starlike® EVO
EVO?
![Page 7: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/7.jpg)
8
![Page 8: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/8.jpg)
9
because of the 150 plus colours availableand total colour fusion on all materials
why
EVO?
![Page 9: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/9.jpg)
10
![Page 10: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/10.jpg)
11
wood effect mood
![Page 11: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/11.jpg)
12
![Page 12: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/12.jpg)
13
natural stone mood
![Page 13: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/13.jpg)
14
cement effect mood
![Page 14: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/14.jpg)
15
![Page 15: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/15.jpg)
16
![Page 16: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/16.jpg)
17
for the extreme fineness of the sintered quartz micro granules with Litokol exclusive technology
STANDARD GRAIN SIZE
FINE GRAIN SIZE QUARTZ MICRO GRANULES, COATED IN SINTERED COLOUR
why
EVO?
![Page 17: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/17.jpg)
18
![Page 18: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/18.jpg)
19
why
EVO?
because of the fluid application and
easy cleaning
![Page 19: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/19.jpg)
20
![Page 20: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/20.jpg)
21
because such a smooth and compact joint has never been seen before
why
EVO?
![Page 21: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/21.jpg)
22
![Page 22: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/22.jpg)
CO2
23
because it is eco-compatible and safe for operators, the environment and transportation
EVO products are a guarantee of safetyfor the health of operators, air qualityin homes and goods transportation.
Non corrosive. Non toxic. Non-hazardous to the environment. ADR-Free. No IMO container.
why
EVO?
![Page 23: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/23.jpg)
COLDCOLLECTIONClass
WARMCOLLECTIONClass
Starlike® EVO24
![Page 24: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/24.jpg)
GlamCOLLECTION EFFECTS CO LLECTION
Starlike® EVO25
![Page 25: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/25.jpg)
26
![Page 26: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/26.jpg)
208 sabbia
215 tortora
225 tabacco
230 cacao
210 greigeWARMCOLLECTION
Class
208 sabbia
27
endless beige
![Page 27: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/27.jpg)
300 azzurro pastello
310 azzurro polvere
320 azzurro caraibi310 azzurro polvere
28
not just light blue
![Page 28: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/28.jpg)
COLLECTIONGlam
29
![Page 29: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/29.jpg)
130
grig
io a
rdes
ia
140
nero
gra
fite
145
nero
car
boni
o
30
![Page 30: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/30.jpg)
COLDCOLLECTIONClass
140 nero grafi te
31
simpleblack and white
![Page 31: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/31.jpg)
32
modern contrasts
![Page 32: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/32.jpg)
100 bianco assoluto
102 bianco ghiaccio
105 bianco titanio
COLDCOLLECTIONClass
100 bianco assoluto
33
![Page 33: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/33.jpg)
110 grigio perla
115 grigio seta
34
stylish joints
![Page 34: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/34.jpg)
110 grigio perla
110 grigio perla
115 grigio seta
105 bianco titanio
120 grigio piombo
COLDCOLLECTIONClass
35
stylish joints
![Page 35: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/35.jpg)
36
![Page 36: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/36.jpg)
EFFECTS CO LLECTION
700 crystal
37
Crystaltransparent
![Page 37: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/37.jpg)
100 bianco assoluto
102 bianco ghiaccio
105 bianco titanio
38
sophisticated white
![Page 38: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/38.jpg)
COLDCOLLECTIONClass
39
![Page 39: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/39.jpg)
40
warm surfaces
![Page 40: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/40.jpg)
105 bianco titanio
115 grigio seta
110 grigio perla
120 grigio piombo
COLDCOLLECTIONClass
110 grigio perla
41
![Page 41: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/41.jpg)
42
![Page 42: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/42.jpg)
550 rosso oriente
580 rosso mattone
600 giallo vaniglia
COLLECTIONGlam
43
spotlight on grouts
![Page 43: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/43.jpg)
44
colour in stone
![Page 44: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/44.jpg)
530 viola ametista
580 rosso mattone
430 verde pino
600 giallo vaniglia
COLLECTIONGlam
45
![Page 45: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/45.jpg)
46
![Page 46: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/46.jpg)
47
with Starlike® EVOone-of-a-kind mosaic-tiled swimming poolsTo grout mosaic-tile swimming pools, specialists the world over choose Starlike® EVO.
For these special applications, Litokol draws on all its experience with customised tests and research for the most suitable solutions based on a variety of materials.
![Page 47: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/47.jpg)
320 azzurro caraibi
330 blu avio
410 verde smeraldo
340 blu denim
48
![Page 48: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/48.jpg)
COLLECTIONGlam
49
reflected patterns
![Page 49: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/49.jpg)
330 blu avio
340 blu denim
350 blu zaffiro
50
immerse in blue
![Page 50: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/50.jpg)
330 blu avio
340 blu denim
350 blu zaffiro
COLLECTIONGlam
51
immerse in blue
![Page 51: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/51.jpg)
52
dappled light
![Page 52: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/52.jpg)
320 azzurro caraibi
330 blu avio
350 blu zaffiro
340 blu denim
410 verde smeraldo
COLLECTIONGlam
53
![Page 53: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/53.jpg)
WARMCOLLECTIONClass
COLDCOLLECTIONClass
100 Bianco Assoluto
102 Bianco Ghiaccio
105 Bianco Titanio
115 Grigio Seta
125 Grigio Cemento
140 Nero Grafite110 Grigio Perla
120 Grigio Piombo
130 Grigio Ardesia
145 Nero Carbonio
200 Avorio
202 Naturale
205 Travertino
210 Greige
225 Tabacco
232 Cuoio
208 Sabbia
215 Tortora
230 Cacao
235 Caffè
54
Over 150 finishes
gradual transition through 10 warm shades, all carefully balanced
10 new shades, studied in minute detail to adapt to any shade of grey
![Page 54: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/54.jpg)
GlamCOLLECTION
300 Azzurro Pastello
310 Azzurro Polvere
320 Azzurro Caraibi
340 Blu Denim
400 Verde Salvia
420 Verde Prato
330 Blu Avio
350 Blu Zaffiro
410 Verde Smeraldo
430 Verde Pino
500 Rosa Cipria
550 Rosso Oriente
530 Viola Ametista
580 Rosso Mattone
600 Giallo Vaniglia
GalaxySpotlight
Gold
55
The glitter finishes Galaxy (pearl effect), Spotlight (silver glitter) and Gold (gold glitter) mixed in as the third component to Starlike® EVO (Class and Glam Collection), allow you to obtain grouting with one-of-a-kind and exclusive effects.
15 on-trend colours and sophisticatedcolour combinations
![Page 55: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/55.jpg)
EFFECTS CO LLECTION
Metallic Platinum
56
The Starlike® EVO collections are completed by a special range of colours, materials and effects which can also be combined with ceramic tiles or ultra-sophisticated mosaics, both in terms of aesthetic appeal and the type of material used.
![Page 56: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/56.jpg)
Bronze
Rusty
Platinum
Shining Gold
Copper
Metallic Platinum
Night Vision
57
With the Platinum, Shining Gold, Bronze, Copper and Rusty additives mixed in as the third component to Starlike® EVO Neutro 113, top-quality joints are obtained to match ceramic tiles or mosaics with metallic effects and colours.
Starlike® EVO Metallic CollectionThe Night Vision additive mixed in as the third component to Starlike® EVO allows you to obtain grouting which, after being exposed to sunlight or artificial light, emanates an amazing fluorescent colour for several hours after dark. The Night Vision additive, for indoor-use only, illuminates the joints with its spectacular and eye-catching effect.
Starlike® EVO Night Vision
Night Vision in the daytime
Night Vision at night-time
![Page 57: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/57.jpg)
700 Crystal
700 Crystal
58
Starlike® Crystal EVOBased on aggregate made from glass beads, Starlike® Crystal EVO is the perfect solution for grouting transparent and artistic glass mosaics. The translucent joint absorbs the colour of the transparent glass mosaics and takes on the same colour. This property makes Starlike® Crystal EVO the ideal grout for transparent glass mosaics with joints up to 3 mm in width. Thanks to its neutral colour and semi-transparent appearance, Starlike® Crystal EVO is also the recommended solution for artistic mosaics because it does not change the colours of the composition or interfere with the image.
![Page 58: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/58.jpg)
820 Azzurro Taormina
825 Beige Havana
800 Grigio Oslo
810 Verde Capri
830 Rosa Kyoto
825 Beige Havana
59
Starlike® ColorCrystal EVOWhile Starlike® Crystal EVO is used exclusively for grouting transparent or artistic glass mosaics, with Starlike® ColorCrys-tal EVO it is possible to achieve tone-on-tone grouting for mosaics that are not completely transparent or consist of both transparent and opaque tiles, which are difficult to harmonise with traditional grout. The Starlike® ColorCrystal EVO colours have been designed to adapt to decorative situations featuring a combination of different materials.
![Page 59: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/59.jpg)
60
Starlike® EVO is a two-component, acid-resistant epoxy grout for laying and grouting ceramic tiles and mosaics with joints between 1 and 15 mm in width. It is extremely easy to apply and clean and is ideal for di-rect contact with foodstuffs.
As an adhesive, it is particularly recommended in the case of installation of thin mosaic. As a smoother, it creates unique decorative solutions, smoothing the walls with the same colour as the grouting.
Starlike® EVO is the only product in the world that can be used in 3 different ways:
1 - epoxy filler for joints;
2 - class R2T adhesive (improved reactive adhesive with no vertical slip);
3 - decorative finish for walls (with Decor additive).
![Page 60: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/60.jpg)
61
![Page 61: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/61.jpg)
Made In Italy
WATERPROOF
1/32”5/8”
1-15mm
UV RESISTANT
RGEN 13888
R2TEN 12004
+5°C /+35°C24 M
PATENTED
62
Application dataTime before grouting floor application:● with normal-setting adhesive: 24 hours● with fast-setting adhesive: 4 hours● with mortar: 7-10 daysWall application ● with normal-setting adhesive: 24 hours● with fast-setting adhesive: 4 hours● with mortar: 2-3 daysMixing ratios:Component A: 93.7 parts by weightComponent B: 6.3 parts by weightThe two components are pre-measured in their respec-tive packagingMix consistency:Thixotropic pasteSpecific gravity of mix1.55 kg/lMixture life:About 1 hour at T = +23°CApplication temperatures allowed: From +10°C to +30°CRecommended application temperature: From +18°C to +23°CSet to light foot traffic: 24 hours at T = +23°CReady for use: 5 days at T = +23°CJoint width: From 1 to 15 mm
PerformanceInitial shear adhesion strength (EN 12003): ≥ 2 N/mm2 Shear adhesion strength after water immersion (EN 12003): ≥ 2 N/mm2 Shear adhesion strength after thermal shock (EN 12003): ≥ 2 N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3
Flexural tensile strength after 28 days at standard conditions (EN 12808-3): ≥ 30 N/mm2 Compressive strength after 28 days at standard conditions (EN 12808-3): ≥ 45 N/mm2 Shrinkage (EN 12808-4): ≤ 1.5 mm Water absorption after 4 hours (EN 12808-5): ≤ 0,1 g Working temperature: From - 20°C to +100°C
Identification dataAppearance Component A: thick coloured paste Component B: thick liquid
Classification according to EN 13888:RG – reactive grout sealantClassification according to EN 12004:R2T - high-performance reactive adhesive and no vertical slipCustoms code:35069190Storage:24 months in original packaging in a dry place.
![Page 62: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/62.jpg)
63
WATERPROOF JOINT: STAIN AND DIRT PROOF
EASY-TO-CLEAN JOINTS THAT DO NOT ABSORB LIQUIDS AND STAINS
GROUTING IN DIRECT CONTRACT WITH CHEMICAL OR AGGRESSIVE SUBSTANCES
RESISTANT TO UV RAYS
IDEAL FOR CONTACT WITH FOODSTUFFS
GROUTING THAT IS RESISTANT TO THE MOST EXTREME INDUSTRIAL APPLICATIONS
BEAUTY AND STRENGTH IN ALL RESIDENTIAL SETTINGS
EASY-TO-CLEAN EVEN FOR APPLICATIONS ON VERY ROUGH R12 TILES
FOR PUBLIC AND COMMERCIAL FLOORS WITH HEAVY FOOTFALL
the benefits of Starlike® EVO
![Page 63: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/63.jpg)
WARMCOLLECTION
1/32”5/8”
1/32”5/8”
1-15mm
1-15mmR2T
EN 12004R2TEN 12004WATERPROOF WATERPROOF
RGEN 13888
RGEN 13888UV RESISTANT UV RESISTANT
+5°C /+35°C
24 MPATENTED +5°C /+35°C
24 MPATENTED
WATER-PROOF
WATERPROOF WATER-PROOF
WATERPROOF
64
With fine grain quartz coated
in vitrified colour
With fine grain quartz coated
in vitrified colour
Packaging
Packaging 1kg 2,5 kg 5 kg
Starlike® EVO Class Cold Collection ✓* ✓ ✓
Starlike® EVO Class Warm Collection ✓** ✓ ✓
Packaging 1kg 2,5 kg 5 kg*
Starlike® EVO Glam Collection ✓ ✓
(*) 100 Bianco Assoluto - 110 Grigio Perla - 125 Grigio Cemento - 140 Nero Grafite(**) 205 Travertino - 210 Greige - 225 Tabacco - 230 Cacao
(*) 300 Azzurro Pastello - 310 Azzurro Polvere - 320 Azzurro Caraibi - 330 Blu Avio - 340 Blu Denim 350 Blu Zaffiro - 400 Verde Salvia - 430 Verde Pino
Packaging 1kg 2,5 kg 5 kg
Starlike® EVO Finishes ✓ ✓ ✓
Packaging 1kg 2,5 kg 5 kg
Starlike® EVO Finishes ✓ ✓
Packaging 1kg 2,5 kg 5 kg
Starlike® EVO Decor ✓ ✓
Packaging 1kg 2,5 kg 5 kg
Starlike® EVO Decor ✓
![Page 64: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/64.jpg)
0-1/8”5/8”
0-3mm
WATERPROOFRG
EN 13888
UV RESISTANT +5°C /+35°C
24 M
0-1/8”5/8”
0-3mm
WATERPROOFRG
EN 13888 UV RESISTANT
+5°C /+35°C
24 MPATENTED
1/32”5/8”
1-15mmR2T
EN 12004 WATERPROOFRG
EN 13888 UV RESISTANT
+5°C /+35°C
24 MPATENTED
WATER-PROOF
WATERPROOF
EFFECTS CO LLECTION
65
With fine grain quartz coated
in vitrified colour
With transparent glass micro
granules
With transparent glass micro
granules
Packaging 1kg 2,5 kg 5 kg
Starlike® Crystal EVO ✓ ✓ ✓
Packaging 1kg 2,5 kg 5 kg
Starlike® EVO - 113 Neutro ✓ ✓
Packaging 1kg 2,5 kg 5 kg
Starlike® Color Crystal EVO ✓
Packaging 1kg 2,5 kg 5 kg
Starlike® EVO Decor ✓
Packaging 1kg 2,5 kg 5 kg
Starlike® EVO Metallic CollectionPlatinum, Shining Gold, Bronze, Copper, Rusty ✓ ✓
![Page 65: EN · 2020. 5. 9. · N/mm2 Open time (EN 1346): ≥ 0.5 N/mm2 after 20 minutes Determination of slip (EN 1308): ≤ 0.5 mm Resistance to abrasion (EN 12808-2): ≤ 250 mm3 Flexural](https://reader035.vdocuments.us/reader035/viewer/2022071608/614634418f9ff81254201d34/html5/thumbnails/65.jpg)
Litonet EVOLitonet Gel EVO
946GR
109GBNC
128G0001
Litostrip Litonet PRO
66
For correct use and further information, consult the technical and safety data sheets on www.litokol.it
You may also need:Application phases:
1 Empty the entire contents of the catalyst (B) onto the paste (A).
2Special finishes: pour the additive onto the paste and mix slowly.
3
Mix using an electric drill fitted with a mixing paddle. Scrape the sides of the bucket to eliminate all parts of non-catalysed product.
4
The joints must be dry. Apply the paste in the joints using a green rubber float (art. 946GR), with diagonal movements in the direction of the joints. Remove the excess product.
5
The grout must be cleaned while the product is still wet. Sprinkle clean water. Clean initially using a moistened white felt pad (art. 109/GBNC) making circular movements. En-sure no water enters the joints.
6 Clean a second time with a sweepex sponge (art. 128G0001).
7
Any stains of the transparent product can be removed after 24 hours or, in any case, after the joint has hardened. Use Litonet EVO (floors) and Litonet Gel EVO (walls). Spread Litonet EVO or Litonet Gel EVO with the white felt pad.
8 Leave on for 15-30 minutes. Rub the surface with the white felt pad.
9 Rinse with clean water. Dry immediately with a clean cloth and do not wait for the rinse water to evaporate.
A
B
Litonet EVOLitonet Gel EVO