emu car shed ghaziabad
TRANSCRIPT
![Page 1: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/1.jpg)
Industrial training
Electrical Loco Shed, Ghaziabad
Abhishek Singh
Roll No.1229040005
![Page 2: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/2.jpg)
SYNTAX USED IN LOCOS Standard “Gauge” designations and dimensions:-
W = Broad gauge (1.67 m)Y = Medium gauge ( 1 m)Z = Narrow gauge ( 0.762 m)N = Narrow gauge ( 0.610m)
“ Type of Traction” designations:-D = Diesel-electric tractionC = DC tractionA = AC tractionCA=Dual power AC/DC traction
The “ type of load” or “Service” designations:-M= Mixed serviceP = PassengerG= GoodsS = Shunting
![Page 3: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/3.jpg)
. “ Horse power ” designations from June 2002(except WDP-1 & WDM-2 LOCOS).
•‘ 3 ’ For 3000 horsepower•‘ 4 ’ For 4000 horsepower•‘ 5 ’ For 5000 horsepower•‘ A ’ For extra 100 horsepower•‘B’ For extra 200 horsepower and so on.
Hence ‘WDM-3A’ indicates a broad gauge loco with diesel-electrictraction. It is for mixed services and has 3100 horsepower.
![Page 4: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/4.jpg)
INTRODUCTION
ESTABLISHMENT
> Electric Loco Shed was set in 1976 by Railway Electrification Organisation (8910 SQ. MTRS).
> It’s main purpose is of maintenance of
WAP1,WAP4,WAP5,WAP7 ,WAG5, WAM4 engines.
INITIAL COSTRs. 1.5 (IN CRORES)
PRESENT LOCO HOLDING184
![Page 5: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/5.jpg)
EMU CAR shed is an industrial-technical setup, whererepair and maintenance works of EMU & MEMU iscarried out, so as to keep the loco working properly.It contributes to increase the operational life of EMU& MEMU and tries to minimize the line failures.
The shed consists of the infrastructure to berth,dismantle, repair and test the loco and subsystems.
The shed working is heavily based on the manualmethods of doing the maintenance job and very lessautomation processes are used in sheds, especially inIndia.
![Page 6: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/6.jpg)
The EMU CAR shed usually has:-
Berths and platforms for loco maintenance.
Pits for under frame maintenance
Heavy lift cranes and lifting jacks
Fuel storage and lube oil storage, watertreatment plant
and testing labs etc.
Sub-assembly overhauling and repairing sections
Machine shop and welding facilities.
![Page 7: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/7.jpg)
TYPES OF TRAINS IN EMU CAR SHED
• There are three trains are inspection andmaintenance in EMU CAR shed. These are as follow :-
• 1. EMU
• 2. MEMU
• 3. DMU
![Page 8: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/8.jpg)
EMU & MEMU
![Page 9: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/9.jpg)
1. EMU – In EMUs one power car (motor coach) is required for three coaches so for an EMU has 12 coaches in length will have 4 power cars & mainly runs in the suburban sections of major cities. It considered as normal local trains such as life line locals of MUMBAI, HYDERABAD, CHENNI etc.
• 2. MEMU’s – In MEMUs one power car in needed for 4 coaches so MEMU are normally has 16-20 coaches long. It runs for long distance more than the suburban sections . It runs on the same line on which normal Local/Exp/Mail/SF trains runs.
• MEMU – Vadodara – Ahmadabad MEMU • MEMU were modified EMU’s introduced in 1993-94
• 3. DEMU’s – In DEMU’s , generally runs on diesel which tank capacity about >4000lts. It named as overhead electric inspection car used in repair & maintenance of overhead cables which fitted above the roof of trains carries 25kv A.C supply.
![Page 10: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/10.jpg)
NO. OF SECTIONS
1 . MECHANICAL WORKSHOP2 . ELECTRICAL WORKSHOP3 . PAINTING WORKSHOP
![Page 11: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/11.jpg)
MECHANICAL WORKSHOP
1. MEASUREMENT & INSPECTION SHOP2. CARPENTARY SHOP3. PENTOGRAPH SHOP4. MACHINE SHOP5. J.S.L TYPE BRAKE CYLINDER SHOP6. POH SHOP7. TRANSMISSION SHOP8. COMPRESSOR SHOP
![Page 12: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/12.jpg)
BOGIE
![Page 13: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/13.jpg)
BOGIE’s
A BOGIE is a wheeled wagon or trolley. Inmechanics terms, a bogie is a frame workwhich carrying wheels attached to coaches.
It is subassembly of 2 axle, 4 wheel, 4 brakecylinder , 2 side bearer, 4 bearing(doubleroller bearing), helical spring etc.
![Page 14: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/14.jpg)
MEASURING & INSPECTION
No GO NO gauge
![Page 15: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/15.jpg)
TYRE DEFECT GUAGE
1. Root wear
2. Sharp flange
3. Thin flange
4. Deep flange
5. Hollow tyre
6. Flat tyre (tyre condum)
![Page 16: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/16.jpg)
TRACTION MOTOR
![Page 17: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/17.jpg)
TRACTION MOTOR
![Page 18: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/18.jpg)
• Traction motor refers to an electricmotor providing the primary rotational torque toa machine, usually for conversion into linearmotion (traction).
• Traction motors are used in electrically poweredrail vehicles such as electric multipleunits and electric locomotives, other electricvehicles such as electric milk floats, elevators,conveyors, and trolleybuses, as well as vehicleswith electrical transmission systems suchas diesel-electric, electric hybridvehicles and battery electric vehicles
![Page 19: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/19.jpg)
CARPENTARY SHOP
![Page 20: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/20.jpg)
Accessory for maintenance
• Guard seat
• Look out Glass
• Head Code Glass
• Sliding Door
• Cab Main Door
• Window
• Passenger seat
![Page 21: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/21.jpg)
Pantograph
![Page 22: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/22.jpg)
Pantograph
• Mounted on the roof of an electric train.• Link between the overhead line and power
circuit of electric locomotive.• Sliding along a bare contact wire of the
overhead system and conveyed to the roof line.
• 25 kv power electricity supply from overhead line to power circuit of electric locomotive.
• 4 to 6kg/cc2
![Page 23: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/23.jpg)
Pantograph Dimension
• Length of pantograph – 2427+-5mm.
• Height of insulater bottom of panto -205+-5mm.
• Maxiam height – 2460+-20mm
• Bow height -300
• Number of turn in main spring – 25/26
• sliding angle of bow with wire – 71/2
• Time taking 1.5m height to up – 6sec
• Time taking 1.5m height to down – 10sec
![Page 24: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/24.jpg)
![Page 25: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/25.jpg)
Application
• Use on 2kv AC electric locomotive.
• Suitable to use on 25kv AC electric multiple unit (EMU).
• Suitable for satisfactory operation on electric locomotive up to 600hp to a speed 130km/hr.
• Rated current 400amp for AC.
• 1100amps for DC application.
![Page 26: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/26.jpg)
MACHINE SHOP
Different types of machines are used to maintain or reshape of the tool.
• Lathe machine
• Lathe pit machine
• Shaper machine
• Radial Drill machine
• Planner machine
![Page 27: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/27.jpg)
Pit Lathe machine
![Page 28: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/28.jpg)
Type of wear may occur on wheel
• Tread wear
• Root wear
• Skid wear
• Flange wear
![Page 29: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/29.jpg)
• For maintaining the required profile pit wheel lathe are used. This lathe is installed in the pit so that wheel turning is without disassembling the axle and lifting the loco and hence the name “pit wheel lathe”
• Gages are used in this section to check.
• Star gage
• Root wear gage
• Flange wear gage
• J gage
![Page 30: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/30.jpg)
RADIAL DRILLING MACHINE
![Page 31: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/31.jpg)
• This drill machine to performing a hole in object with the twist drill.
• Use to produce hole heavier and bigger size job.
• This drill machine rotate in all 3 axis i.e. X-axis, Y-axis, Z-axis.
• Work pice remain remain stationary while tool rotates.
• Base made of heavy column.
![Page 32: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/32.jpg)
High power-to weight ratio.Fewer LocomotiveFast AccelerationHigher limit of speedHigher hauling capabilityNo carbon emissionLess noise pollutionMaintenance cost is 50% of that for steam engine.Steam engine requires two hours for heat up whereaselectric engine start within moment.High torque motor are used in electric traction.
ADVANTAGE OF ELECRICAL LOCO
![Page 33: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/33.jpg)
Significant capital cost of electrification.Maintenance cost is high.Overhead wires further limit the clearance in tunnel.Railway traction need immune power, with no cuts.
DISADVANTAGES
![Page 34: Emu car shed ghaziabad](https://reader033.vdocuments.us/reader033/viewer/2022050613/5a67063d7f8b9a85028b4a17/html5/thumbnails/34.jpg)
Thank You!!