emseal catalog 2011 webx[1]

PRODUCT CATALOG

Watertight by design ©

Expansion Joint andSealant ProductsExpansion Joint andSealant Products

Structural and ArchitecturalStructural and Architectural

Watertight / Fire Rated / Sound DampeningEnergy Efficient / Seismic / Trafficable

www.emseal.com

2

EMSEAL JOINT SYSTEMS, LTD 25 Bridle Lane, Westborough, MA 01581 PH: 508.836.0280 FX: 508.836.0281EMSEAL, LLC 120 Carrier Drive, Toronto, ON, Canada M9W 5R1 PH: 416.740.2090 FX: 416.740.0233

www.emseal.comToll Free800-526-8365

Standard CAD details are available online at www.emseal.com. For application specific CAD details contact EMSEAL directly.

INDE

X

Structural & ArchitecturalExpansion Joint & Preformed Sealant Products

The EMSEAL SolutionEMSEAL is proud to offer high-quality, innovative anddurable materials for use in sealing and bridging smalland large building component and structural joints infoundations, decks, walls, and floors. This catalog offers aselection of the industry’s finest sealants and expansionjoint products for structural and architectural applications.

Product is important, but the company’s track record ofsuccessfully completed projects is equally attributable toits approach to expansion joint treatment. Anybody canmake an expansion joint appear watertight in cross-section. However, joints leak at changes in plane,direction and where dissimilar joint materials meet.

Successful projects with expansion joints that don’t leakare characterized by a collaborative commitment by theA/E team, the general contractor, the joint manufacturer,and the waterproofing sub-contractor to detail, construct,fabricate, and install three-dimensional solutions. EMSEALuniquely facilitates this process through a needs analysisand communication process that anticipates andaddresses problems before they literally becomecast in concrete.

This collaborative approach is not just theory. It is apractice that has resulted in the successful execution ofwatertight expansion joints on new and retrofit projects onstructures of every type. Owners, architects, engineers,general contractors, EMSEAL, and like-mindedwaterproofing sub-contractors are proving this approachpossible and practical.

With over 30 years of designing and supplying jointsealing and bridging solutions for projects worldwide,EMSEAL has emerged as the innovation and performanceleader in providing lasting expansion joint solutions.

ApplicationsEMSEAL products are designed and manufactured to meetthe demands of both the remediation of existing buildingsand the maintenance of new structures. EMSEAL'sengineered technologies provide the designer, the installerand the building owner with the lowest total cost ofownership expansion joint solutions in the industry.

Selector Guides

EMSEAL products address the application demands ofmodern construction. From small details such as traffic pointloads to larger concerns such as LEED certification andseismic design, EMSEAL is meeting the evolving demandsof modern architecture and engineering. This catalogdisplays EMSEAL's architectural product line of joint sealanttechnologies.

EMSEAL Product FeaturesBreakthroughs in Foam ImpregnationsThe backpressure resulting from impregnated foamtechnology eliminates the need for mechanical anchoringmethods. Screws and other hardware, which traditionallyhave been the only means to anchor to a substrate, areeliminated. Non-invasive anchoring allows for a secure holdwith simpler installation in a much shorter time.

100% Wax-freeThere is no place for saturated waxes in the impregnatedfoam industry. Both saturated wax products, as well asasphalt technologies, suffer similar shortcomings such aslow temperature brittleness and high temperature instability.

EMSEAL’s microsphere-modified, 100% acrylicimpregnation is unique in enhancing the desirablecharacteristics of the foam base such as resilience, whileimparting water and temperature resistance. Thisformulation outperforms imitation products based oncommodity foams and wax saturations.

First in Fire-Rated, Watertight,Multi-Purpose Joint SealsCertified by Underwriters Laboratories to the rigors ofUL-2079, EMSEAL’s EMSHIELD series of products ischanging the expansion joint sealing game. It is no longernecessary to have to choose between watertightness andfire rating. Because the fire-rating is now built into theexpansion joint it is no longer necessary to specify twoinstallations of separate joint sealant and fire-resistantjoint fillers in either decks or walls. EMSEAL also offers apick-resistant, fire-rated expansion joint when vandalismand tampering are an important concern.

http://www.emseal.com

EMSEAL


3



INDEXSelector Guides

EMSEAL Track RecordThe list of successful EMSEAL expansion joint installationsis growing every day. We are the basis of design inoriginal construction and are the industry leader forretrofitting existing structures. A small sample of recentwork includes:

Fenway Park / Empire State Building / CN Tower TorontoMicrosoft Campus / Yankee Stadium / PentagonMuseum of Modern Art (NY) / Las Vegas HiltonMall of America / University of Michigan / Prudential CenterRonald Reagan National Airport / Cleveland Museum of ArtCharlotte Motor Speedway / Texas A&M / CNN PlazaGates Residence / Citi Field / Dell HeadquartersWAL-Mart Distribution Centers / Lambeau FieldCal Poly Pamona / Gerald R. Ford International AirportSmithsonian Museum / McCarran International AirportIndianapolis Motor Speedway / Art Institute of ChicagoFoxwoods Casino / US Air Force Academy / Clorox PlazaAbu Dhabi Financial Center / Planet Godrej - IndiaUnited States Mint / Lincoln Center / The World BankBerlin Federal Prison / Bryant Denny Stadium (Univ. of Alabama)Port Allen River Lock / Atlanta International Airport CONRAC

and hundreds of other stadiums, museums, corporate buildings,residences, schools, airports, hospitals, municipal buildings,parking garages, bridges and other structures throughout the world.

Talk To Us TodayThis catalog is a brief introduction to what we provide.You can also find comprehensive information on theweb at www.emseal.com. If you would like to discussa specific application demand please call us at1-800-526-8365 or 508-836-0280.

Enhanced R-ValueEMSEAL’s foam-based, wall-joint systems are excellentinsulators. They contain no metal and attach to substrateswithout invasive metal anchors avoiding any conductivethermal breaks in wall components. Whether for small joints infaçade panels or at window perimeters, or in the backupwalls of cavity-wall construction, or even in structural walls ofblock or precast, EMSEAL joint sealants provide continuity ofinsulation at all penetrations.

Sound BarrierWalls sealed with our preformed sealants have soundabsorption properties that approximate those of a solid wall.Independent laboratory STC and OITC tests prove that fillinga structural joint with an EMSEAL product can restore theoriginal sound transmission coefficient of the wall itself.Choose a fire-rated EMSEAL product and the wall is sound-proofed, fire-rated, insulated, color-coordinated and able tomove – all in a single product installation.

Ecologically Sound (LEED)EMSEAL’s hybrid impregnated materials use water-basedemulsions and contain no chlorinated wax, isobutylene orother deleterious chemicals. The unique features of theseproducts are synchronous with LEED design principles andcan contribute toward achieving LEED points. And EMSEALfoam products have an industry-leading lifecycle advantage.

Commitment to Service and Quality AssuranceAt EMSEAL service begins from the first contact and contin-ues throughout the design, procurement and installationprocess. A comprehensive EMSEAL representation networkthroughout the US, Canada, and increasingly throughout theworld is serviced locally by Regional Managers and/orrepresentatives and is backed up at our corporate headquar-ters by dedicated Regional Inside Technical Support staff.

Using project-specific application checklists and web andphone-based collaboration to address job requirements, thesupport staff will work with you to understand and meet yourneeds. The result is a working relationship with EMSEAL thatproduces the best product choice and solution for yourspecific project.


Selector Guides

Cat. Page

8

9

10

11

12

912

914

14

912

8912

Application

Secondary Seal to FieldApplied Liquid Sealant, 50% Movement

Structural Joints in Exterior Walls –Primary and Secondary Sealin Single Product, 50% Movement

Structural Joints in Exterior and InteriorWalls – 2-Hour Fire-Rated, WatertightSingle Product, 50% Movement

Structural Joints in Exterior and InteriorWalls – Pick-Resistant/Tamper-Resistant2-Hour Fire-Rated, WatertightSingle Product, 50% Movement

Structural Joints in Exterior Walls –Primary and Secondary Sealin Single Product, 100% Movement

Curved Expansion JointsNew to Old Additions

Structural Joints forShallow Substrates

Dual Sealing – One Install

Color Switching to MatchSubstrate Changes

Size Switching to AccommodateJoint Gap Variations

EMSEAL Product

BACKERSEAL

COLORSEAL

EMSHIELD WFR2

EMSHIELD SecuritySeal SSW

SEISMIC COLORSEAL

COLORSEAL orSEISMIC COLORSEAL

COLORSEAL orSEISMIC COLORSEAL DS

SEISMIC COLORSEAL DS

COLORSEAL orSEISMIC COLORSEAL

BACKERSEALCOLORSEAL

SEISMIC COLORSEAL

Wall Joints Above-Grade – Product Selection Guide:

Wall Joints Below-Grade – Product Selection Guide:

Usage Guide:

Typical Substrates

Foundation WallsTunnel Walls & FloorsPlanter Walls & Floors

Usage Guide:

StandardJoint Size(at Mean T°)

1/8" to 6"(3 - 150mm)

1/2" to 8" *(12 - 200mm)

1/2" to 6"(12 - 150mm)

1/2" to 6"(12 - 150mm)

1/2" to 8" *(12 - 200mm)

1/2" to 8" *(12 - 200mm)

1/2" to 8" *(12 - 200mm)

1/2" to 8" *(12 - 200mm)

1/2" to 8" *(12 - 200mm)

1/8" to 8" *(3 - 200mm)

* EMSEAL has provided seals up to 20" wide in specific applications. Please consult with EMSEAL about your specific needs.

Cat. Page

1516

17

Application

Below-Grade Walls,Positive Side Accessible

Below-Grade Walls, Blind Side

EMSEAL Product

20H SYSTEM orDSM SYSTEM

BG SYSTEM


1/2" to 4" *(12 - 100mm)

2" (50mm)


Typical Substrates

Brick

Stone

EIFS

Concrete Blocks

Gypsum Board

Pre-cast Panels

Metal Panelized Systems

Curtain Walls

Fire-Rated Walls

Tamper-Resistant Walls

Window Walls

Parapet Walls

Cavity Walls

Interior Acoustic

Sky Bridges

Window Perimeters

4




INDE

XW

ALLS

– A

bove

Gra

deW

ALLS

– B

elow

Gra

deDE

CKS

– So

lid S

lab

/ Pr

ecas

tDE

CKS

– Sp

lit S

lab

/ Pl

aza

Inte

rior

Flo

ors

and

Wal

lsSp

ecia

lty


Selector Guides

Decks Solid Slab / Precast – Product Selection Guide: Usage Guide:

EMSEAL Product

HORIZONTAL COLORSEAL

DSM System

DSM System

DSM System


EMSHIELD DFR2

EMSHIELD DFR3

EMSHIELD SecuritySeal SSF2


THERMAFLEX Series

SJS SYSTEM

SJS-FR1 SYSTEM

SJS-FR2 SYSTEM


1/2" to 8" *(12 - 200mm)

1/2" to 4" *(12 - 100mm)

1/2" to 4" *(12 - 100mm)

1/2" to 4" *(12 - 100mm)

1/2" to 8" *(12 - 200mm)

1/2" to 4"(12 - 100mm)

1/2" to 4"12 - 100mm)

1/2" to 4"(12 - 100mm)

1/2" to 4"(12 - 100mm)

1" to 5-1/2" max(25 - 140mm)

4" to 24"(100 - 600mm)

4" to 10"(100 - 250mm)

4" to 10"(100 - 250mm)


Application

Protected or Non-Traffic Deck Applications100% Movement

Top and Intermediate Decks55% Movement

Tee-to-Tee and Other Control JointsIdeal for Correcting Pour Problems.

Perimeter Joints

2-Hour Fire-Rated, Top and IntermediateDecks, Joint-Face Adhered, Watertight,Trafficable, Single Installation

3-Hour Fire-Rated, Top and IntermediateDecks, Joint-Face Adhered, Watertight,Trafficable, Single Installation

2-Hour Fire-Rated, Pick-ResistantTamper-Resistant, Joint-Face Adhered,Watertight, Trafficable, Single Installation

3-Hour Fire-Rated, Pick-ResistantTamper-Resistant, Joint-Face Adhered,Watertight, Trafficable, Single Installation

Top and Intermediate Decks,Blockout Mounted

Large or Seismic Top andIntermediate DecksJoint-Face Adhered with Integral Coverplate

1-Hour Fire-Rated, Large or Seismic Topand Intermediate DecksJoint-Face Adhered with Integral Coverplate

Fire-Rated, Large or Seismic Topand Intermediate DecksJoint-Face Adhered with Integral Coverplate

Typical Substrates

Parking Decks

Roof Joints

Ice Rink Perimeters

Stair / Elevator Tower Perimeters

Stadium Tread and Risers

Sidewalks

Fire-Rated Applications

Airport Aprons

Roadways

Parking Decks

Stadium / Arena Treads & Risers

Concourses

Floors

EMSEAL


5



INDEXW

ALLS – Below Grade

DECKS – Solid Slab / PrecastW

ALLS – Above GradeDECKS – Split Slab / Plaza

Interior Floors and Walls

Specialty

Cat. Page

22

18

18

18

22

20

20

21

21

27

24

26

26


Selector Guides

Exterior Specialty – Product Selection Guide:

Typical Uses

Water Treatment Facilities

Water Parks

Swimming Pools

Fountains

Spill Containment

Chemical Environments

Potable Water

Water Storage

Non-Contamination Areas

Usage Guide:

Cat. Page

33

32

33

EMSEAL Product

CHEMSEAL

Submerseal

DSF System


1/2" to 4" *(12 - 100mm)

1/2" to 4" *(12 - 100mm)

1/2" to 8" *(12 - 200mm)

* For head-pressure limitations please consult with EMSEAL about your specific needs.

Application

Chemical ResistantJoint-Face Adhered50% Movement

Chlorine ResistantContinuous SubmersionJoint-Face Adhered50% Movement

Non-ContaminatingJoint-Face AdheredNSF/ANSI-Certified50% Movement

Decks Split Slab / Plaza – Product Selection Guide:

Typical Substrates

Podium Decks

Split Slab Plaza Decks

Garden Roofs

Roadways

Stadium Concourses

Usage Guide:

Application

Integrally Tied intoSplit Slab Construction

Integrally Tied intoSplit Slab Construction

For Expansion Joints that Tie into Split SlabConstruction, also Solid Slab to Split SlabConstruction, Joint Face Adhered

For Expansion Joints that Tie into Split SlabConstruction, also Solid Slab to Split SlabConstruction, 2-Hour or 3-Hour Fire-Rated

For Large or Seismic Designed Jointsthat Tie into Split Slab ConstructionJoint Face Adhered with Integral Coverplate

For Large or Seismic Designed Jointsthat Tie into Split Slab Construction1-Hour or 2-Hour Fire-Rated


Up to 3 1/4" max(85mm) max

Up to 6" max(150mm)

1/2" to 4"(12 - 100mm)

1/2" to 4"(12 - 100mm)

4" to 24"(100 - 600mm)

4" to 10"(100 - 250mm)

Cat. Page

28

28

30

30

31

31

EMSEAL Product

MIGUTAN FP 110

MIGUTAN FP 155

DSM-FP SYSTEM

DFR-FP SYSTEM

SJS-FP SYSTEM

SJS-FP-FR SYSTEM

6




INDE

XW

ALLS

– A

bove

Gra

deW

ALLS

– B

elow

Gra

deDE

CKS

– So

lid S

lab

/ Pr

ecas

tDE

CKS

– Sp

lit S

lab

/ Pl

aza

Inte

rior

Flo

ors

and

Wal

lsSp

ecia

lty


Interior Floors & Walls – Product Selection Guide:

Typical Uses

Convention Centers

Stadiums

Arenas

Hospitals

Warehouses

Schools

Office Buildings

Condos

Airports

Shopping Malls

Casinos

Fire-Rated Locations

Prisons & Secure Facilities

Application

Interior Floors andInterior Walls

Interior Walls2-Hour Fire-RatedSingle Product

Interior WallsPick-Resistant/Tamper-Resistant2-Hour Fire-RatedSingle Product

Interior Floors2-Hour Fire-RatedSingle Product

Interior Floors3-Hour Fire-RatedSingle Product

Interior FloorsPick-Resistant/Tamper-Resistant2-Hour Fire-RatedSingle Product

Interior FloorsPick-Resistant/Tamper-Resistant3-Hour Fire-RatedSingle Product

Interior Walls and CeilingsAcoustic and ThermalJoint and Gap Filler forNon-Moving Joints and Gaps


Up to 24" max(600mm) max

1/2" to 6"(12 - 150mm)

1/2" to 6"(12 - 150mm)

1" to 4"(25 - 100mm)

1" to 4"(25 - 100mm)

1" to 4"(25 - 100mm)

1" to 4"(25 - 100mm)

1" to 6"(25 - 150mm)

Cat. Page

35 – 41

10

11

20

20

21

21

34

EMSEAL Product

Various Products

EMSHIELD WFR2

EMSHIELD SecuritySeal SSW2

EMSHIELD DFR2

EMSHIELD DFR3



QuietJoint

Selector Guides

EMSEAL


7



INDEXW

ALLS – Below Grade

DECKS – Solid Slab / PrecastW

ALLS – Above GradeDECKS – Split Slab / Plaza


Specialty


BACKERSEAL

Joint Sizeat Mean T°F

Inches (mm)1/8 (3)1/4 (6)3/8 (10)1/2 (12)5/8 (15)3/4 (20)1 (25)2 (50)3 (75)4 (100)5 (125)6 (150)

Depth of Seal

Inches (mm)5/8 (15)3/4 (20)3/4 (20)3/4 (20)1 (25)1 (25)1 1/4 (30)2 1/2 (65)3 1/8 (80)4 (100)5 (125)6 (160)

BACKERSEAL Sizing

Typical BACKERSEAL Usage

• Warranted for watertightness

• 100% free of wax or asphalt compounds

• Featuring EMSEAL's exclusive, breakthrough,microsphere-modified acrylic impregnation technology

• Watertight, odorless, clean handling, non-staining,low-temperature flexible, high-temperature stable

• Thermally insulating

• Acoustic dampening –STC rated 53 (in a STC 68 wall)OITC rated 49 (in a OITC 52 wall)

• Conforms to joint gap irregularities

• Also available in sticks

• Movement of +/- 25% (Total 50%) of nominal size

BACKERSEAL (Greyflex) is an economicalpreformed expanding foam sealant that provideswatertight secondary sealing in applicationsbehind conventionally installed liquid sealant andbacker rod or directly behind field-applied lowmodulus liquid sealants.

BACKERSEAL behind field-applied liquidsealant provides true "belts and suspenders"sealing – 2 systems working on differentprinciples to guarantee performance of thesame function.

Structures of all sizes canbenefit from the performanceand ease-of-installation offeredby BACKERSEAL.

BACKERSEAL in place as a secondary seal toliquid sealant and backer rod. This doublesystem ensures a redundant seal to water andinsulates against energy loss while preservingthe liquid sealant manufacturer’s geometry foroptimal performance.

BACKERSEAL is installed in a position recessed fromthe joint face. A low-modulous liquid sealant is directlyapplied over it to complete a hybrid sealant system.

Sound Attenuation STC 53 / OITC 49

WAL

LS –

Abo

ve G

rade

8




WAL

LS –

Abo

ve G

rade

WALLS Above Grade

Watertight by design©


WALLS Above Grade




• Non-invasive anchoring

• Primary and secondary seal in one step

• 26 standard and custom colors (see page 13)


• Size switching accommodates joint gap variations



• Bellows remain tension-free during joint movement

• Won't suffer from compression set


COLORSEAL combines factory-applied and curedsilicone bellows with a microsphere-modified acrylic-impregnated expanding foam sealant backing.

Color coordination and color switching make COLORSEAL an aestheticallyversatile option for joints from 1/2" (12mm) up to 8" (200mm) in virtuallyany substrate material.

COLORSEAL


Inches (mm)1/2 (12)5/8 (15)3/4 (20)1 (25)2 (50)3 (75)4 (100)5 (125)6 (150)7 (175)8 (200)

Depth of Seal

Inches (mm)1 1/2 (40)1 1/2 (40)1 1/2 (40)1 3/4 (45)2 1/2 (65)3 1/2 (90)4 3/4 (120)5 1/2 (140)6 (150)7 (175)8 (200)

COLORSEAL sizes are available in 1/4" incrementsof nominal sizes from 1" to 6", and 1/2" incrementsfrom 6" to 8". Consult EMSEAL for larger sizes.Nominal size is equivalent to joint gap size at meantemperature.

COLORSEAL Sizing

COLORSEAL is held in place by a combinationof pressure-sensitive adhesive impregnationand back-pressure of the expanding foam inconjunction with a field-installed bead of siliconecaulk at the substrate-to-bellows interface.

COLORSEAL installed as primary rain screen ina brick facade, as well is in the concrete-blockstructural backup, where it ensures continuity ofR-value and air barrier while preventing cavitymoisture from entering the structure.

Typical COLORSEAL Usage

Now Available

COLORSEALUNIVERSAL-90's

Factory-FabricatedTransitions & Terminations

See page 23



9



WALLS – Above Grade

WALLS Above Grade


UL

/ U

LC F

IRE-

RAT

ED

EMSHIELD WFR2 / WFR3

EMSHIELD WFR2 and WFR3 are patent-pending, single-unit, fire-ratedexpansion joints which provide water protection, sound attenuation,thermal insulation, color coordination, and accommodate structural jointmovement. WFR2 (Wall, Fire-Rated 2-Hours) and WFR3 (3-Hours)continue the line of breakthrough, multi-function, structural expansionjoint materials from EMSEAL. Both have been tested and certified byUnderwriters Laboratories (UL) to the rigors of UL and ULC 2079.

Fire-retardant impregnated foam is factory pre-coated on both faceswith an intumescent fire-proofing material. It is then coated again onboth faces with a waterproof silicone coating which is available in achoice of 26 colors for each side.

Providing an excellent barrier to sound transfer, WFR2 and WFR3 havean STC rating of 62 (in a STC 68 wall) and an OITC rating of 52 (in aOITC 52 wall). They also been tested to ASTM E330, ASTM E331, andASTM E283 standards maintaining air pressure and stopping water andwind penetration at 200 mph.

EMSHIELD WFR2 and WFR3 provide a watertight, clean handling, UVstable, non-staining, low-temperature-flexible, high-temperature-stable,energy-efficient, sound attenuating and fire-rated joint seal in asingle installation process. For interior and exterior walls.Movement of ± 25% (50% total)

WFR2 sizes are available in 1/4" increments of nominalsizes from 1" to 6". Nominal size is equivalent to jointgap size at mean temperature.

Watertight, Energy-Efficient 2-hour and3-hour Fire-Rated Wall Expansion Joint

EMSHIELD WFR2 / WFR3

One Install Does It All

Water / Fire / Energy / Sound / Movement

Silicone-FacedIntumescent Bellows(Shown in an alternate color)

Fire RetardantImpregnated Foam

Silicone-FacedIntumescent Bellows(Available in 26standard colors)

Patent Pending

UL Systems WW-D-0091, WW-D-0092, WW-D-1079WW-D-1081, HW-D-0615, HW-D-1090

WW-D-0087, WW-D-00899

ULC Systems JF131, JF132,JF145, HW77


10

WALLS Above Grade





WAL

LS –

Abo

ve G

rade

Now Available

EMSHIELDUNIVERSAL-90's


See page 23

EMSHIELD WFR2 / WFR3 SizingWFR2 Depthof Seal

Inches (mm)4 (100)4 (100)4 (100)4 (100)4 (100)4 (100)4 (100)4 (100)4 (100)4 (100)4 (100)4 (100)

WFR3 Depthof Seal

Inches (mm)5 (125)5 (125)5 (125)5 (125)5 (125)5 (125)5 (125)5 (125)5 (125)5 (125)5 (125)5 (125)


Inches (mm)1/2 (12)5/8 (15)3/4 (20)1 (25)1 1/4 (30)1 1/2 (40)1 3/4 (45)2 (50)3 (75)4 (100)5 (125)6 (150)


SecuritySeal SSW

EMSHIELD SecuritySeal SSW2 is a pick-resistant, watertight,2-hour fire-rated, expansion joint for vertical locations requiringa hardened tamper-resistant surface. Institutional walls found inprisons, detention centers, mental and psychiatric hospitals,school facilities, and day-care centers are some of the manyvenues where SecuritySeal SSW is the perfect choice.

SecuritySeal SSW2 SizingJoint Sizeat Mean T°F

Inches (mm)1/2 (12)5/8 (15)3/4 (20)1 (25)1 1/4 (30)1 1/2 (40)1 3/4 (45)2 (50)3 (75)4 (100)5 (125)6 (150)

Depth of Seal

Inches (mm)4 (100)4 (100)4 (100)4 (100)4 (100)4 (100)4 (100)4 (100)4 (100)4 (100)4 (100)4 (100)

SSW2 sizes are available in 1/4" increments of nominalsizes from 1" to 6". Nominal size is equivalent to jointgap size at mean temperature.

Pick-Resistant, 2-hour Fire-Rated,Watertight, Wall Expansion Joint

Vandalism / Water / Fire / Movement / Sound

Now Available

SecuritySealUNIVERSAL-90's


See page 23

Patent Pending


UL Systems WW-D-0093, WW-D-1083,HW-D-0616, HW-D-1091

ULC Systems JF134, HW78

Typical SecuritySeal SSW Usage

Topview of SecuritySeal SSW. Installed in a fire-ratedwall, the front face is sealed with a polyurethanecorner bead for watertightness

SecuritySeal SSW is manufactured with a single bellowpolyurethane face on both sides when used in a gap from1/2-inch (12mm) to 1 1/2-inch (40mm).

• Hardened pick-resistant surface

• 2-hour built-in fire rating (UL/ULC-certified)








EMSEAL


11




WALLS Below GradeWALLS Above Grade


UL / U

LC FIR

E-RATED


SEISMIC COLORSEAL

SEISMIC COLORSEAL is an idealsolution for textured or roughsubstrates. The product’s pliantnature combined with its inherentbackpressure allows it to conformto the textured wall surface.

Notching and bending the foambacking permits the siliconefacing of the bellows to remainseamless at directional changeswhich are historically difficult tomake watertight. For warrantedCAD details between dissimilarEMSEAL joint technologiesplease call EMSEAL or go towww.emseal.com.

SEISMIC COLORSEAL installed ina building facade betweendissimilar materials maintains theR-Value in the building envelope.Because SEISMIC COLORSEALuses no fasteners it is especiallysuited to filling joints at insidecorners.

Non-invasive anchoring andsealing is achieved through acombination of the pressure-sensitive adhesive acrylicimpregnation, the inherent backpressure of the foam and a field-applied corner bead of silicone.

Curves in building elements areeasily accommodated through thematerial’s omni-directionalflexibility.

SEISMIC COLORSEAL is a silicone-coated,precompressed, primary seal that is used instructural, high-movement joints in virtually anysubstrate. It is ideally suited for watertightness invertical or horizontal structural, seismic andabutment joints in the vertical plane.




• Primary seal



• Size switching accommodatesjoint gap variations







12

WALLS Above Grade





WAL

LS –

Abo

ve G

rade



SEISMIC COLORSEAL


Inches (mm)1/2 (12)5/8 (15)3/4 (20)1 (25)2 (50)3 (75)4 (100)5 (125)6 (150)7 (175)8 (200)

Depth of Seal

Inches (mm)1 1/2 (40)1 1/2 (40)1 1/2 (40)1 1/2 (40)2 1/2 (65)3 1/2 (90)4 1/2 (115)5 1/2 (140)6 (150)7 (175)8 (200)

SEISMIC COLORSEAL sizes are available in 1/4"increments in nominal sizes from 1" to 6", and 1/2"increments from 6" to 8". Consult EMSEAL for largersizes. Nominal size is equivalent to joint gap sizeat mean temperature.

SEISMIC COLORSEAL Sizing

Precast White

White

Limestone

Grey

Black

Bronze

Sandstone

Adobe Tan

Dusty Rose

Rustic Brick

Blue Spruce

Charcoal

Natural Stone

Standard COLORSEAL Colors

For custom colors see www.emseal.com

Colors printed on this page are printing approximationsof actual colors. Please see actual samples or swatchesfor a truer match.

Tru White

Precast

Beige

Limestone

Anodized Aluminum

Aluminum Stone

Natural Stone

Sandstone

Charcoal Gray

Classic Bronze

Black

Hartford Green

Red Rock

Dow Corning 790 Colors Pecora 890NST Colors

© Dow Corning is a registered trademark of Dow Corning Corporation

© Pecora is a registered trademark of Pecora Corporation

® ®


13




WALLS Above Grade


WALLS Above Grade

Typical SEISMIC COLORSEAL Usage

Now Available

SEISMIC COLORSEALUNIVERSAL-90's


See page 23

SEISMIC COLORSEAL is held in place by a combination of itspressure-sensitive adhesive impregnation, the inherent back-pressure of the expanding foam as well as by a field-installedbead of liquid silicone at the substrate-to-bellows interface.

SEISMIC COLORSEAL is uniquely suited to sealingstructural joints in curtainwalls. Non-invasive anchoringmeans that mullions are not violated by screwing throughthem as occurs with “strip-seal” systems.

SEISMIC COLORSEAL is an excellent, simple sealingsolution at inside corner conditions where it isimpossible to install mechanically fastened ‘strip-seal’ systems. In cavity-wall conditions, installationof SEISMIC COLORSEAL in the structural backupmaintains integrity of thermal insulation as well asthe air barrier while preventing passage of cavitymoisture into the structure.


Typical SEISMIC COLORSEAL DS Usage

SEISMIC COLORSEAL DS

SEISMIC COLORSEAL DS is a unique, highly innova-tive, customized variation of EMSEAL’s acclaimedSEISMIC COLORSEAL material. Ideally suited for shallowsubstrates where sealing or finishing of both sides of thestructure is desired in one installation.



• Rapid installation to seal two surfaces (frontand back) in a single installation


• 26 standard and custom colors (see page 13)• Conforms to joint gap irregularities





• Movement of +/- 50% (Total 100%) of nominal sizein any direction

SEISMIC COLORSEAL DS seals interior and exterior sides of curtain wall jointsin a single installation step. Each side can have its own color to match interiorand exterior color schemes. For parapets it can provide a top, front, and backsealed surface addressing all three exposed planes.


Inches (mm)1/2 (12)5/8 (15)3/4 (20)1 (25)2 (50)3 (75)4 (100)5 (125)6 (150)7 (175)8 (200)

Depth of Seal

Inches (mm)1 1/2 (40)1 1/2 (40)1 1/2 (40)1 1/2 (40)2 1/2 (65)3 1/2 (90)4 1/2 (115)5 1/2 (140)6 (150)7 (175)8 (200)

SEISMIC COLORSEAL DS Sizing

SEISMIC COLORSEAL DS can be made incustom depths to seal both sides ofshallow substrates.

SEISMIC COLORSEAL DS is ideal for sealing both the exteriorand interior faces of window and curtainwall systems. Colors oneach face can be chosen to coordinate with interior and exteriorfinishes. Non-invasive anchoring preserves the integrity of thesubstrates while the product’s inherent R-value ensurescontinuity of insulation.

SEISMIC COLORSEAL DS sizes are available in 1/4"increments in nominal sizes from 1" to 6", and 1/2" incrementsfrom 6" to 8". Consult EMSEAL for larger sizes. Nominal sizeis equivalent to joint gap size at mean temperature.

Now Available

SEISMIC COLORSEAL DSUNIVERSAL-90's


See page 23


14

WALLS Above Grade





WAL

LS –

Abo

ve G

rade


20H System

The 20H System is a tried and true preformed expandingfoam sealant produced by impregnating permanentlyelastic, high-density, open-cell polyurethane foam with anacrylic polymer-modified, water-based asphalt emulsion.The architectural and engineering community has benefitedfrom 20H System's performance for over 30 years.


• 100% free of wax

• Used as a primary seal for exterior vertical belowgrade walls for installation from the positive side





• Movement of +/- 25% (Total 50%) of nominal size The 20H System in place with an active drainage system(supplied by others) to draw water away from the foundation.

The 20H System acts as a resilient support to below-gradewaterproofing membranes.


Inches (mm)1/2 (12)5/8 (15)3/4 (20)1 (25)2 (50)3 (75)4 (100)

Depth of Seal

Inches (mm)1 1/2 (40)1 1/2 (40)1 1/2 (40)2 (50)2 3/4 (70)3 1/2 (90)4 (150)

20H System Sizing

20H sizes are available in 1/4" increments in nominalsizes from 1" to 4". Nominal size is equivalent to jointgap size at mean temperature.

Typical 20H Usage

WALLS Above Grade


WALLS Below Grade

EMSEAL


15



WALLS – Below

Grade


Now Available

DSMUNIVERSAL-90's


See page 23

DSM System

The DSM System is a durable joint-face adhered,precompressed primary seal. It combines hydrophobic-acrylic impregnated foam sealant with factorypre-coated silicone bellows. It is available as standardsingle-sided (DSM) or optional double-sided (DSM-DS).



• Used as a primary seal for exterior vertical belowgrade walls for installation from the positive side


• Non-staining



• 100% free of wax and asphalt

• Movement of +30% and -25% (Total 55%)of nominal size

DSM installed below-grade acts as aneffective water barrier. Epoxy, backpressureand field-injected sealant bands holds thesystem in-place allowing for a permanentand easy to install solution. (DSM-DSdouble sided illustrated below)

DSM sizes are available in 1/4" increments innominal sizes from 1" to 4". Consult EMSEAL forlarger sizes. Nominal size is equivalent to joint gapsize at mean temperature.


Inches (mm)1/2 (12)5/8 (15)3/4 (20)1 (25)2 (50)3 (75)4 (100)

Depth of Seal

Inches (mm)1 1/2 (40)1 1/2 (40)1 1/2 (40)2 (50)2 1/2 (65)2 3/4 (70)3 1/2 (90)

DSM Sizing

Typical DSM and DSM-DS Usage

WALLS Below Grade


16




WAL

LS –

Bel

ow G

rade


• Integration of the below-grade waterproofingmembrane and expansion joint system on thepositive side of the wall or floor

• Applications include:

Underside of the floor-slab of a foundation ortunnel with freestanding walls

Under the floor-slab and the walls of a blind-sideformed foundation or tunnelOn the walls only of a blind side formed foundation

• Ensures that movement at the joint gap isproperly accommodated

BG System

The BG System is a heavy-duty, double-celled, extruded,heat-weldable rubber gland flanked by integral sideflashing sheets. It is combined in the field with a water-proofing membrane and accessories offered by thewaterproofing membrane manufacturer for use in blindforming conditions. The BG System is the only expansionjoint system designed for blind side applications.

Once the BG system is installed to the mud-slab or lagging,concrete is cast to encapsulate the waterproofing membraneand BG resulting in an integrated watertight system whichaccommodates movement at the joint gap.

The BG System on a vertical blind-side wall application with a "boottransition" where it joins withanother EMSEAL product abovegrade (shown with COLORSEAL).

For specifications and limitations see BG Systemat www.emseal.com or contact EMSEAL.

Typical BG System Usage

A typical inside cornerapplication of the BGSYSTEM integrated with ablind-side waterproofingmembrane.

In this typical tunnel application, BG is usedunder the slab and up the blind-side formedwalls. At the transition above the blind-sidewalls, BG joins to MIGUTAN (see page 28) onthe freestanding walls across the roof orplaza deck.


17



WALLS – Below

Grade

WALLS Above Grade


WALLS Below Grade


The DSM System is a traffic durable, joint-face adhered,precompressed primary seal. Using a patent-pendingmicrosphere-modified-acrylic impregnation and factorypre-coated with highway-grade silicone, this system buildson EMSEAL’s track record of over 30 years of sealinghorizontal plane joints with impregnated foam sealants.



• UV stable


• Non-staining

• Low-temperature flexible, high-temperature stable



• Movement of +30% and -25% (Total 55%) ofnominal size

DSM is uniquely suited toretrofitting existing joints andreadily replaces failed caulk,compression seals, inflated seal,and closed-cell joint fillers.

DSM features easy installation.After epoxy has been applied tothe substrate the DSM foamsticks are pushed into the joint.Adjoining sticks are aligned intothe face of the already installedstick and held above thesurface until the adjoiningstick is seated into the joint.

The DSM SYSTEM is a traffic-durable, lasting solution to highmovement and heavy load trafficfound in today's parking structures.New construction and retrofitapplications are a perfect fit for DSM.

The waterproofing of stadiumexpansion joints seen here inthe precast seating bowl. DSMoffers continuity of seal throughchanges in plane and direction.

18

DECKS Solid Slab





DECK

S –

Solid

Sla

b /

Prec

ast

DSM System



19



INDEXDECKS – Solid Slab / Precast

WALLS Above Grade


DECKS Solid Slab

DSM SYSTEM technology providesa structural joint sealant solution.Here DSM is installed at the topof a ramp where a drivelanetransitions from on-gradeto supported slab and fromdeck-to-deck to deck-to-wall.

Firmly embedded existing metal angles at the edges of expansionjoint gaps can easily accommodate DSM.

DSM is an ideal solution for deck to deck light and heavytraffic. This watertight product is easily installed andprovides a low service cost during its life span.

The non-invasive anchoring method makes DSM a great choicefor deck to wall applications.

DSM sizes are available in 1/4" increments innominal sizes from 1" to 4". Consult EMSEAL forlarger sizes. Nominal size is equivalent to joint gapsize at mean temperature.


Inches (mm)1/2 (12)5/8 (15)3/4 (20)1 (25)2 (50)3 (75)4 (100)

Depth of Seal

Inches (mm)1 1/2 (40)1 1/2 (40)1 1/2 (40)2 (50)2 1/2 (65)2 3/4 (70)3 1/2 (90)

DSM Sizing

Typical DSM Usage

Now Available

DSMUNIVERSAL-90's


See page 23

DSM System


Now Available

EMSHIELDUNIVERSAL-90's


See page 23

EMSHIELD DFR2 / DFR3

EMSHIELD DFR2 and DFR3 are single unit fire-rated, trafficdurable, high movement and watertight expansion joints.EMSHIELD DFR2 (Deck, Fire-Rated 2-Hours) and EMSHIELD DFR3(Deck, Fire-Rated 3-Hours) have been tested and certified byUnderwriters Laboratories (UL) to the rigors of UL and ULC 2079.

Installed entirely from floor/deck surface above allowing for easierinstallation without compromising continuity of the fire-barrier fromobstructions (e.g. columns, HVAC, electrical, plumbing, etc.)

EMSHIELD DFR2 and DFR3 provide a watertight, clean handling,UV stable, non-staining, low-temperature-flexible, high-tempera-ture-stable, traffic durable and fire-rated joint seal in a singleinstallation process.Movement of ± 25% (50% total)

Traffic Durable, Watertight,2-hour & 3-hour Fire-RatedDeck/Floor Expansion Joint

Patent Pending

UL Systems FF-D-0075, FF-D-1086, FW-D-0052FW-D-1073, FW-D-0078, FW-D-1090

FW-D-0053, FW-D-1075

ULC Systems JF130, JF133, JF137, JF138


• Built-in fire-rating


• Installed from above floor/deckNo lofts or holding labor needed

• Eliminates traditional need for fire-blankets or gutters

• Acoustic dampening – STC rated 62 / OITC rated 52


• Movement of ±25% (Total 50%)

Typical DFR2/DFR3 Usage

20

DECKS Solid Slab





DECK

S –

Solid

Sla

b /

Prec

ast

UL

/ U

LC F

IRE-

RAT

ED

EMSHIELD DFR2 and DFR3 can be installed in interior andexterior horizontal locations needing a UL/ULC certified firerating. Its non-invasive anchoring design allows it to be easilyinstalled in deck-to-deck (floor-to-floor) or deck-to-walllocations. Parking garages, mechanical rooms, stadiums, retailstores, and other locations with trafficable floor/deckconditions will benefit from the installation of this watertight,sound-suppressing, thermally insulating expansion joint.


EMSHIELD DFR2/3 SizingJoint Sizeat Mean T°F

Inches (mm)1/2 (12)1 (25)2 (50)3 (75)4 (100)

Depth of Seal

Inches (mm)4 (100)4 (100)4 (100)4 (100)4 (100)

DFR2 nominal material size is equivalent tojoint gap size at mean temperature. Also availablein 1/4 inch increments from 1/2-inch to 4-inches.


Now Available

SecuritySealUNIVERSAL-90's


See page 23

SecuritySeal SSF2 / SSF3

EMSEAL


21



DECKS – Solid Slab / Precast

WALLS Above Grade


DECKS Solid Slab

EMSHIELD SecuritySeal SSF2 and SecuritySeal SSF3 are pick-resistant, watertight, 2-hour (SSF2) and 3-hour (SSF3) fire-ratedexpansion joints for horizontal locations requiring a hardenedtamper-resistant surface.

Installed entirely from floor/deck surface above allowing for easierinstallation without compromising continuity of the fire-barrier fromobstructions (e.g. columns, HVAC, electrical, plumbing, etc.)

Floors and decks found in prisons, detention centers, public parkinggarages, mental and psychiatric hospitals, and school facilities aresome of the many venues where SecuritySeal SSF is the perfectchoice. Floor joints which join fire-rated walls in common rooms,mechanical rooms, and stairwells are typical locations of use.

SecuritySeal SSF2 / SSF3 Sizing

SSF2 and SSF3 nominal material size is equivalent tojoint gap size at mean temperature. Also availablein 1/4 inch increments from 1/2-inch to 4-inches

Pick-Resistant, 2-hour and 3-hour Fire-Rated,Watertight, Floor/Deck Expansion Joint

Vandalism / Water / Fire / Traffic / Sound

Patent Pending


UL Systems FF-D-0076, FF-D-0077, FF-D-0088FF-D-0089, FW-D-0054, FW-D-0055

FW-D-0076, FW-D-0077

ULC Systems JF135, JF136, JF139, JF141

Typical SecuritySeal SSF Usage

SecuritySeal SSF2 and SSF3 canbe used in deck-to-wall as well asdeck-to-deck applications.

SecuritySeal SSF2 and SSF3 are manufactured with asingle bellow polyurethane face on both sides when usedin a gap from 1/2-inch (12mm) to 1 1/2-inch (40mm).

• Hardened pick-resistant surface

• 2-hour and 3-hour built-in fire-rated (UL/ULC-certified)



• Installed from above floor/deckNo lofts or holding labor needed

• Acoustic dampening – STC rated 62 / OITC rated 52


UL / U

LC FIR

E-RATED


Inches (mm)1/2 (12)1 (25)2 (50)3 (75)4 (100)

Depth of Seal

Inches (mm)4 (100)4 (100)4 (100)4 (100)4 (100)


DECK

S –

Solid

Sla

b /

Prec

ast

Typical HORIZONTAL COLORSEAL Usage


HORIZONTAL COLORSEAL is selected to blend with the color of thesurrounding substrate. It is an ideal solution in non-traffic situations andhas the unique ability to handle curved joints large and small.







• Thermally insulating and acoustic dampening

• Bellows are never under tension duringjoint movement

• No blockout required

• Movement of +/- 50% (Total 100%)

HORIZONTAL COLORSEAL is a high-movementsilicone bellows system for deck applications used asa primary seal typically without a cover-plate in non-traffic areas such as perimeters in decks or roofs. Itcan be used under a coverplate when pedestrian orvehicular traffic is expected.

HORIZONTAL COLORSEAL sizes are available in 1/4"increments in nominal sizes from 1" to 6", and 1/2"increments from 6" to 8". Nominal size is equivalent tojoint gap size at mean temperature.

HORIZONTAL COLORSEAL SizingJoint Sizeat Mean T°F

Inches (mm)1/2 (12)5/8 (15)3/4 (20)1 (25)2 (50)3 (75)4 (100)5 (125)6 (150)7 (175)8 (200)

Depth of Seal

Inches (mm)1 1/2 (40)1 1/2 (40)1 1/2 (40)1 1/2 (40)2 1/2 (65)3 1/2 (90)4 1/2 (115)5 1/2 (140)6 (150)7 (175)8 (200)

Now Available

HORIZONTAL COLORSEALUNIVERSAL-90's


See page 23

HORIZONTAL COLORSEAL is often installedat the junction of a deck and wall.

HORIZONTAL COLORSEAL is typically installed in an area wherevehicular or pedestrian traffic does not come in direct contactwith the seal. In vehicular situations this is often installed inconjunction with a metal coverplate.

22

DECKS Solid Slab






UNIVERSAL-90's

EMSEAL


23



WALLS Above Grade


Prefabricated Transitions

Universal-90's Transitions and Terminationsare patent-pending, factory-fabricated, single-piece90° units constructed from the same materials as theconnecting precompressed expansion joint system.Bellows are constructed on both sides allowing awaterseal in an inner or outer 90° corner. This singleunit achieves the greatest possible continuity of sealin transitions in planes, avoiding the limitations offield-made joins.

Using Universal 90's in your expansion joint designensures continuity of seal. Installation time is reducedand the integrity of the seal is maintained.

Universal-90's are available for all coated EMSEALproducts.

Some of the many applications:• Stadiums

• Arenas

• Parking Decks

• Floors

• Deck-To-Wall

• Elevator Tower Perimeters

• Deck-to-Deck

• Bridge Expansion Joints

• Water Tanks

• Stair Tower Perimeters

• Tunnels and Enclosures

Continuity of Seal at Upturns,Downturns and Termination Points

Patent Pending

UNIVERSAL-90 Configurations

Horizontal toVertical Downturn

Transitions

Horizontal toVertical Upturn

Downturn toVertical Overhang

Upturn toVertical Rise

Terminations


24

DECK Solid Slab





DECK

S –

Solid

Sla

b /

Prec

ast

EMSEAL offers pre-fabricatedfactory transitions for treads andrisers which allow for ease ofinstallation and which alsoensure watertightness in changesof plane.

Installation is completed withaluminum or stainless-steelcoverplates. The center splinefunctions as a continuousreceptor for the self-locatingcoverplate screws allowing forgreater ease of installation. Thecoverplate edge-chamfer isavailable in standard or optionallow-slope configurations.

The back pressure of the SJSfoam and an epoxy adhesiveprovides watertightness withnon-invasive anchoring withoutrelying on a gutter. Installation isfaster than other morecomplicated systems.

Watertightness is assured at thetraffic surface negating the needfor ineffective moisture barriersand secondary gutters.

SJS is a watertight, high-movement, sound-dampenedcoverplate system for large and seismic expansion jointgaps. SJS is constructed from two horizontal jointspre-assembled in parallel adjacent to a heavy-dutyextruded aluminum spline. The system contains nometal embeds, self-centering bars, or other unneces-sary metal components. The spline acts as a receptorfor attaching the surface-mounted traffic plates thatbear vehicle and other loads.


• Easy installation with non-invasive anchoring

• No hard metal-to-concrete connections

• Factory fabricated changes in plane and direction

• Aluminum or stainless steel coverplates available

• Field-adjustable plate support

• The quietest coverplate system available wheninstalled with EMSEAL-supplied elastomericnosing material

• Coverplate is easy to install withself-locating, vibration-dampening screws

• Does not depend on a gutter

• Designed for gaps of 4-inches (100 mm) or larger

• Movement of +50% and -50% (Total 100%) ofnominal size

• Fire-Rated* version also available. See Page 26*SJS-FR1 1-hour UL/ULC-certified*SJS-FR2 2-hour UL/ULC-certified

SJS – Seismic Joint System


SJS – Seismic Joint System

EMSEAL


25




WALLS Above Grade


DECKS Solid Slab

SJS installed recessed from the deck or road surface loweringthe coverplate to the traffic surface height. The elastometricnosing material works to level the coverplate as well as to absorband attenuate sound.

SJS SizingJoint Sizeat Mean T°F

Inches (mm)4 (100)5 (125)6 (150)7 (175)8 (200)9 (225)10 (250)11 (275)12 (300)13 (325)14 (350)15 (372)16 (400)17 (425)18 (450)

The SJS Seismic Joint System installed flush with the jointsurface.

SJS maintains its watertight capabilities even with changes in plane anddirection. Here horizontal and vertical coverplates cover the foam.

Installation can also be made at deck-to-wall conditions.

Typical SJS UsageDepth of Seal

Inches (mm)4 (100)4 (100)4 (100)4 (100)4 (100)5 (125)5 (125)5 (125)5 (125)5 (125)5 (125)5 (125)5 (125)5 (125)5 (125)

SJS sizes are available in 1" increments in nominalsizes from 4" to 24". Consult EMSEAL for largersizes. Nominal size is equivalent to joint gap sizeat mean temperature.

The SJS Seismic Joint System provides an effectivelarge-gap waterproofing solution. A fire-ratedversion for expansion gaps from 4-inches to10-inches is available (see SJS-FR page 26).It can also be combined with a separate traditionalfire-barrier to provide a fire rating at larger sizes(illustration above).


SJS-FR Fire-Rated Seismic Joint System

SJS-FR1 and SJS-FR2 are fire-rated, watertight expansion seals which aredesigned for larger gaps. Their topping coverplate makes them the best solutionfor applications such as parking decks, stadium concourses and seating levels,interior and exterior floors, and other locations where larger or seismic gapsneed a fire-rated, watertight, traffic-bearing expansion joint.

Typical SJS-FR Usage


Inches (mm)4 (100)5 (125)6 (150)7 (175)8 (200)9 (225)10 (250)

Depth of Seal

Inches (mm)6 (150)6 (150)6 (150)6 (150)6 (150)6 (150)6 (150)

Sizes are available in 1" increments innominal sizes from 4" to 10". Nominalsize is equivalent to joint at meantemperature.

The SJS-FR System can also be used with surfaceblockouts built-up with EMSEAL’s EMCRETE nosingmaterial. Beneath the coverplate, the nosing materialacts as a leveling course and a sound-absorbingbuffer. The coverplate can sit proud of the deck orrecessed to be flush with the deck.

The SJS-FR System is a highly trafficable UL-certifiedfire-rated expansion joint for larger gaps of 4-inches(100mm) to 10-inches (250mm). Surface-mount orrececessed coverplate is available in aluminum orstainless steel.

SJS-FR Sizing

SJS-FR1UL Systems

FFD-1091, FFD-2014

ULC System JF140

SJS-FR2UL Systems

FFD-1092, FFD-2015

ULC System JF142

• 1-hour or 2-hour UL/ULC-certified fire-rated

• Built-in fire-rating

• Eliminates the need for fire-blankets or gutters


• Installed from above floor/deckNo lifts or holding labor needed

• Easy installation with non-invasive anchoring

• No hard metal-to-concrete connections


• Coverplate is easy to install withself-locating, vibration-dampening screws

• Movement of ±50% (Total 100%) of nominal size

SJS-FR1 and SJS-FR2 are UL/ULC certified (2079) fire-rated, watertight, high-movement, sound-dampened systemsfor large and seismic expansion joint gaps. Designed for usein fire-rated concrete decks/floors, interior or open air slabs,treads and risers, in both new or retrofit construction.

Installed from floor/deck surface above allowing for easierinstallation without compromising continuity of the fire-barrierfrom obstructions (columns, HVAC, electrical, plumbing, etc.)

SJS-FR1 and SJS-FR2 have all of the performance advan-tages of the SJS System with the addition of a built-in UL-certified 1-hour (SJS-FR1) or 2-hour (SJS-FR2) fire rating.They are constructed of fire-retardant foam with an intumes-cent coating on the non-traffic underside. The top provides awarranted watertight seal.The topping coverplate provides adurable trafficable surface.

SJS-FR1 1-hour fire-rated

SJS-FR2 2-hour fire-rated

UL

/ U

LC F

IRE-

RAT

ED

26

DECKS Solid Slab





DECK

S –

Solid

Sla

b /

Prec

ast


Typical THERMFLEX Usage

THERMAFLEX

THERMAFLEX provides a durable expansion joint which will stand up to directtraffic pressure. Factory-welded transitions are engineered to accommodatechanges in plane over curbs, and in treads and risers on stadiums.

THERMAFLEX is a traffic-durable membrane/nosing system. The gland used in the systembecomes integral with the deck as the nosingmaterial penetrates the perforations in thegland, encapsulates the flanges, and bondsto the concrete.


• Double-cell or multi-cell glands

• Heat weldable Santoprene gland

• Factory-fabricated transitions andterminations

• Cold-applied nosing is self-curing

• Nosing material is a two-part polyurethanereinforced with fiberglass and silica sand

• Aggregate loading is conservatively maintainednot to exceed two parts aggregate to one partresin by weight

• Nosing material is easily troweled

• Durable under vehicular traffic andextreme weather conditions

Sealing glands are heat-weldable allowing for changes in direction or planewhile maintaining watertightness. Factory-fabricated transitions allow forease of installation. EMSEAL warrants its transitions both within thetechnology and transitions made in the vertical plane between dissimilarEMSEAL technologies to be watertight.

Deck to wall/column installation is achieved onthe vertical surface with an expansion anchorand an aluminum termination plate.

For size variations or information please consult EMSEAL technical services

Model No.

TM 1.5TM 2.5

TCR 300TCR 400TCR 500TCR 600

Blockout Dimensions (Each side of joint gap)

3/4 in x 3 in (19mm x 75mm) 3/4 x 3 (19 x 75)

3/4 x 3 1/2 (19 x 90) 3/4 x 3 1/2 (19 x 90) 3/4 x 3 1/2 (19 x 90) 3/4 x 3 1/2 (19 x 90)

Installation Width Min Preferred Max

1 in (25mm) 1 1/4 in (30mm) 2 in (50mm)1 1/4 (30) 2 1/4 (55) 2 3/4 (70)

1 7/8 (47) 2 1/8 (53) 2 3/4 (70)2 1/4 (55) 2 3/4 (70) 3 3/4 (95)3 (75) 3 1/2 (90) 4 3/4 (120)4 1/2 (115) 4 3/4 (120) 5 1/2 (140)

THERMAFLEX is constructed of extruded thermoplastic Santoprene®

rubber sealing glands with punched flanges embedded in a high-strength, flexible, impact-absorbing elastomeric nosing.

THERMAFLEX Sizing


27




WALLS Above Grade


DECKS Solid Slab


MIGUTAN FP110 / FP155

MIGUTAN FP110 and FP155 are unique designsincorporating side membrane sheets which integrate with thedeck waterproofing system to form a continuous, completelywatertight system. MIGUTAN is the only system of its kind witha 20-year track record and tens of thousands of feet installedand functioning. MIGUTAN is the most configurable, warranted,split slab expansion joint in the industry.

• Exceptional durability under vehicular trafficand extreme weather conditions

• Can be used below grade or on decks

• Heavy-duty positive interlocking aluminum side rails

• Steel side legs available

• Stainless steel gland-retaining capping strips

• Sealing insert and side flashing sheet areheat-weldable thermoplastic rubber (TPR)

• Factory fabricated tees, crosses, directional changes,column details, terminations and changes in plane

• Leg heights from 1" (25mm) to 12" (300mm)as well as low leg height versions

• Available with integrated coverplate

The MIGUTAN sealing insert andside flashing sheets are madeof heat-weldable thermoplasticrubber. This ensures continuity ofseal through transitions in planeand direction as well as atterminations. The flashing sheetsare embedded in and encapsulatedby the deck waterproofingmembrane. The result is a staticintegration of the joint and thewaterproofing that will not fail fromcyclical movement across the joint.

The MIGUTAN design provideswatertight joints over occupiedspaces below such as stadiums.It also provides for a pedestrian-friendly and accessible surface.

Leg heights from 1" (25mm) to12" (300mm) accommodatepavers, asphalt, concrete andother wear-course toppingsallowing for exceptional durabilityunder vehicular traffic andextreme weather andtemperature conditions.

Positive interlocking metal rails(or alternative stainless steelpins) eliminate misalignmentbetween adjoining sections. Thismethod has proven successfulwith tens of thousands of feetinstalled and functioning overthe past 20 years. Factory-fabricated direction changesensure continuity of seal.

FP155 seen in deck-to-wallapplication at a column transition.

Optional SpeedSpline coverplate forheavy-duty, wide joint applicationsfeatures unique anchoring systemsuspended in impact absorbing nosingmaterial.

28

DECKS Split Slab





DECK

S –

Split

Sla

b /

Plaz

a


See Below See Below See Below

Typical MIGUTAN Usage

MIGUTAN FP110 / FP155

Factory-fabricated corners and transitions arepart of the MIGUTAN system. Each change in planeor direction is constructed from field-suppliedmeasurements to create a custom, watertighttransition within the MIGUTAN system or wherethe joint requirement changes to other EMSEALtechnologies.

In deck to deck applications,MIGUTAN is ideal for plazaand podium decks, stadiumconcourses, arrival roadways,and anywhere waterproofedsplit-slabs are designed.

EMSEAL offers numerous options forMIGUTAN applications at deck-to-wallconditions as shown here in E2, E3 andE8 configurations. The EMSEAL technicalservice team can help you map aMIGUTAN solution to integrate deck-to-deck models to deck-to-wall models,and MIGUTAN can be configured tohandle curved expansion joints andother hard-to-seal conditions.

E2

E3

E8

For size variations or information please consult EMSEAL technical services. Visit www.emseal.com

MIGUTAN FP110Model No.

FP110/25FP110/45FP110/60FP110/80FP110/95FP110/115FP110/130FP110/150FP110/165FP110/185FP110/200FP110/220FP110/235FP110/255FP110/270FP110/290FP110/305

TotalMovement

2 1/2 in(60mm)

Overall WidthSystem at Mean Temp

9 in (225mm)

9 3/8 in(237mm)

MIGUTAN FP155Model No.

FP155

Leg Height

1 in (25mm)1 3/4 (45)2 3/8 (60)3 1/8 (80)3 3/4 (95)4 1/2 (115)5 1/8 (130)5 7/8 (150)6 1/2 (165)7 1/4 (185)7 7/8 (200)8 5/8 (220)9 1/4 (235)10 (255)10 5/8 (270)11 1/2 (290)12 (305)

Available in same leg heights as the FP110 (see chart above)Migutan FP155 is engineered for wider joint gaps.Contact EMSEAL for joint gap and performance specifications.

MovementRange

For sizes above 150mm: Intended for non-vehicular-traffic plaza decks. Extra-high leg heights accommodate thick overlay systems andtopping slabs. These models are supplied with extra-long (double-width) side sheets to ensure proper integration with deck waterproofing.

+1 1/4 in (+30mm)–1 1/4 in (–30mm)

Max. Joint Gapat Mean T°F

2 3/8 in (65mm)

3 in(75mm)

Exposed WidthSystem at Mean Temp

4 3/8 in(112mm)


29



DECKS – Split Slab / Plaza

WALLS Above Grade


DECKS Split Slab


DSM-FP

• Ideally suited to parking decks, stadium concourse, plazas, andother smaller-joint, waterproofed split-slab applications

• Exceptional durability under pedestrian traffic andextreme weather conditions

• Stainless steel flashing sheet capping strips

• Side flashing sheets are heat-weldable thermoplastic rubber (TPR)


• Steel side legs available in many heights


• New construction or retrofit of failed older construction

• Movement of +30% and -25% (Total 55%) of nominal size

DSM-FP sizes are available in 1/4" increments innominal sizes from 1" to 4". Consult EMSEAL forlarger sizes. Nominal size is equivalent to joint gapsize at mean temperature.


Inches (mm)1/2 (12)5/8 (15)3/4 (20)1 (25)2 (50)3 (75)4 (100)

Depth of Seal

Inches (mm)1 1/2 (40)1 1/2 (40)1 1/2 (40)2 (50)2 1/2 (65)2 3/4 (70)3 1/2 (90)

DSM-FP Sizing

DSM-FP is a versatile expansion joint for split slab construction as well assplit slab-to-solid slab applications. Fabricated transitions from deck towall, at curbs, sidewalks, parapets, tees, and crosses are available withthe DSM-FP.

DSM-FP is a trafficable joint system for plaza decks & split slabsdesigned to straddle joint gaps up to 4-inches (100mm). DSM-FPexpands the use of the DSM SYSTEM to waterproofed split-slab deckdesigns through the use of side flashing sheets that integrate with thedeck waterproofing membrane.

Typical DSM-FP Usage

DSM-FP is an effective watertight expansion joint which canbridge split-slab and solid-slab construction. The connectionto solid-slab construction is made directly to the slabsubstrate. The split-slab connection is made to the DSM-FPmounting leg. The split-slab connection incorporates anintegral waterproofing flashing sidesheet embedded betweenlayers of the deck waterproofing membrane on the structuralslab and beneath the topping slab. Shown here are deck-to-deck (above) and deck-to-wall (below).

30

DECKS Split Slab





DECK

S –

Split

Sla

b /

Plaz

a

Available UL/ULC Fire-Rated: DFR-FPContact EMSEAL for more information


SJS-FP installation consists of the two sub-assemblies which make up thesystem. The mounting leg assembly and integral waterproof sidesheets areinstalled onto the structural slab and integrated with the deck waterproof-ing system. The watertight, precompressed SJS assembly is installedbetween the rails of the mounting leg assembly and then capped with analuminum or stainless steel coverplate.

SJS-FP expands the use of the SJS System to waterproofed split-slab deck designs through the use of side flashing sheets thatintegrate with the deck waterproofing membrane. The system ismade up of two sub-assemblies which include the structural-slabmounted supporting legs with integral waterproofing side sheetsand the joint sealing and coverplate assembly.

• Ideally suited to stadium concourse, roadway, plaza, andother large-joint, waterproofed split-slab applications

• Exceptional durability under vehicular traffic andextreme weather conditions

• Stainless steel flashing sheet capping strips

• Side flashing sheets are heat-weldable thermoplastic rubber (TPR)


• Steel side leg available in many heights


• No hard connection between coverplate and concrete substrate

• The quietest coverplate system available

• Self-locking, vibration dampened screws

• Movement of +50% and -50% (Total 100%) of nominal size

Typical SJS-FP Usage


Inches (mm)4 (100)5 (125)6 (150)7 (175)8 (200)9 (225)10 (250)11 (275)12 (300)13 (325)14 (350)15 (372)16 (400)17 (425)18 (450)

Depth of Seal

Inches (mm)4 (100)4 (100)4 (100)4 (100)4 (100)5 (125)5 (125)5 (125)5 (125)5 (125)5 (125)5 (125)5 (125)5 (125)5 (125)

Sizes are available in 1" increments innominal sizes from 4" to 24". ConsultEMSEAL for larger sizes. Nominal sizeis equivalent to joint at meantemperature.

Watertight configurations and factory-fabricatedtransitions and terminations are available fordeck-to-wall and other conditions.

The SJS-FP system features the addition of sideflashing sheets which are fully encapsulated in astatic, watertight integration with the deck'sburied waterproofing membrane.

SJS-FP Sizing

EMSEAL


31



DECKS – Split Slab / Plaza

WALLS Above Grade


DECKS Split SlabSJS-FP Seismic Joint System

Available UL/ULC Fire-Rated: SJS-FP-FRContact EMSEAL for more information


Submerseal

Submerseal is a water resistant, joint-face-adhered, precompressed,primary seal for retrofit and new structural expansion joints andconstruction joints where continuous or intermittent immersion orcontact with chlorinated water (up to 5 ppm), saline water or potablewater is planned. Typical applications include swimming pools,fountains, water parks, water features, water tanks, etc.

Submerseal SizingJoint Sizeat Mean T°F

Inches (mm)1/2 (12)5/8 (15)3/4 (20)1 (25)2 (50)3 (75)4 (100)

Depth of Seal

Inches (mm)1 3/4 (45)1 3/4 (45)1 3/4 (45)2 1/8 (55)3 (75)3 1/2 (90)5 (125)

Submerseal sizes are available in 1/4" increments ofnominal sizes from 1" to 4". Nominal size is equivalentto joint gap size at mean temperature.

Watertight Expansion Joint for ContinuousImmersion in Chlorinated, Saline orPotable Water Environments

Now Available

SubmersealUNIVERSAL-90's


See page 23

Typical Submerseal Usage

Submerseal is available in sizes to fit gapsas small as 1/2-inch (12mm).

Larger gaps up to 4-inches (10mm), submerged or thatcome in contact with chlorine, are typical Submersealapplications.

Submerseal is manufactured to seal joints which come in contact with chlorinatedwater as found in pools and fountains. Because its silicone surface meets NSF/ANSI Standard 61 it is applicable for potable water tanks and storage structures.






• NSF/ANSI STANDARD 61 compliant

• Resistant to chlorinated water (up to 5 ppm)

• Resistant to saline water

• Bellows is never under tension duringjoint movement

• No blockout required

• Movement of +/- 25% (Total 50%) Hydrostatic Head Pressure Resistance

Joint Size

Inches (mm)1 (25)2 (50)3 (75)4 (100)

Continuous ImmersionMax. Allowable Liquid Depth

Feet (meters) 30 (10) 20 (6) 15 (5) 10 (3)

32

Specialty Seals





Spec

ialty


CHEMSEAL System

EMSEAL


33



Specialty

WALLS Above Grade


Specialty Seals

The CHEMSEAL System remains watertight incontact with chemicals and chemical dilutions.

CHEMSEAL is a watertight expansion joint system which features apolysulfide bellows sealing surface backed by an integral pressure-resisting impregnated foam backing. The polysulfide bellows sideprovides resistance to many chemicals commonly found in non-puresolutions. This makes CHEMSEAL a great solution for joints and seamsoccurring in waste water tanks, chlorinated water reservoirs, industrialtesting tanks or where diluted-chemical contact may occur.

DSF System

DSF System is a joint-face-adhered, precompressed, primary sealfor retrofit and new structural expansion joints and construction jointsin walls and floors in food production and preparation environments.

Compliant to NSF/ANSI Standard 61 for contact with potable drinkingwater and with FDA Regulation CFR 177.2600 for indirect contactwith food.

CHEMSEAL is available innominal sizes of 1/2" to 4". DSFis available in nominal sizes of1/2" to 8". Sizes are availablein 1/4” increments. Nominal sizeis equivalent to joint gap size atmean temperature. ConsultEMSEAL for larger sizeapplications.In submerged applications theamount of hydrostatic headpressure that can be resisted byCHEMSEAL or DSF is affectedby joint width and depth of seal.Consult EMSEAL for sizerequirements.


Inches (mm)1/2 (12)5/8 (15)3/4 (20)1 (25)2 (50)3 (75)4 (100)5 (125)6 (150)7 (175)8 (200)

Depth of Seal

Inches (mm)1 1/2 (40)1 1/2 (40)1 1/2 (40)2 (50)2 1/2 (65)2 3/4 (70)3 1/2 (90)5 1/2 (140)6 (150)7 (175)8 (200)

CHEMSEAL / DSF Sizing

Restaurants, food preparation and manufacturing facilitiesbenefit from the DSF System which provides a watertightseal with NSF/ANSI-compliant silicone bellows which willnot contaminate liquids.

CHEMSEAL / DSF Features• Warranted for watertightness


• UV stable


• CHEMSEAL: Polysulfide bellows forchemical resistance

• DSF: NSF/ANSI-compliant silicone bellows formulatedto avoid contamination of liquids or solids

• Low-temperature flexible, high-temperature stable


• Movement of up to +25% and -25% (Total 50%)of nominal size

As seen here CHEMSEAL can be used as an elementin various waterproofing system designs. Shownabove with oakum or open-cell backer rod soakedwith hydrophobic polyurethane grout.

CHEMSEAL and DSF can function as a double-sided expansion joint acting as a single unit,primary seal. Both CHEMSEAL and DSF canalso be installed in a vertical wall.

CHEMSEAL and DSF are single-sidedexpansion joints located between joint facesacting as a single unit, primary seal. Liquid andchemical contacts with bellows face. BothCHEMSEAL and DSF can also be installedin a vertical wall.

Typical CHEMSEAL and DSF Usage

Now Available

CHEMSEAL and DSFUNIVERSAL-90's


See page 23

Notes

CHEMSEAL / DSF

CHEMSEAL / DSF

CHEMSEAL / DSF

CHEMSEAL / DSF

CHEMSEAL / DSF

CHEMSEAL / DSF

CHEMSEAL / DSF

CHEMSEAL / DSF

DSF

DSF

DSF

DSF


QuietJoint

QuietJoint is colorized, versatile and ideally suited to fill gapsbetween the ends of permanent, semi-permanent, or movablepartitions, head-of-wall and other conditions.

QuietJoint is supplied in uncompressed and slightly oversized full-story 10-foot lengths. Installation of QuietJoint is quick and easyrequiring no mechanical anchors or epoxies. When installed thematerial is compressed by hand and squeezed into the gap oropening. The internal backpressure of the material secures it tothe joint faces.

The product is composed of a self-extinguishing, fire-retardant*-acrylic-impregnated foam, factory pre-coated with high-qualitysilicone.QuietJoint makes an excellent sound attenuator whichwill conform to slight irregularities of gap construction.

Sound, Draft, Heat, Cold, and Dust BlockingAcoustic Joint Filler for InteriorNon-moving Joints and Gaps.

QuietJoint easily fills in gaps and joints between partitions, walls andwindows, head of walls, and other non-moving locations.


• Thermally insulating (R-value 5.96/inch of depth)

• Quick, easy installation





• UV-stable

• Clean-handling, non-staining



Typical QuietJoint Usage

When filling a gap as a single unit, 2-inch QuietJointdisplays impressive sound attenuation capabilities -STC 53 in a STC 56 wall and OITC 38 in an OITC 38 wall.It also has an R-value of 5.96 for its 1-inch of depth.

When two units of 2” QuietJoint are installed from bothsides of a gap the sound dampening capabilities increase -STC 72 in a STC 72 wall and OITC 60 in an OITC 61 wall.It also has an R-value of 11.92 for its 2-inches of depth.

* QuietJoint is fire-retardant and does not promote the spread of flame or smoke, however it has not been UL-tested for fire-rating.


34

Specialty Products





Spec

ialty


Interior Products


35




WALLS Above GradeSelector Guide

MIGUTRANS FS Series features heavy duty interlocking all-metalprofiles for heavy point loads while the FP Series is designed to bridgevarious width joint gaps utilizing a robust rubber sealing insert. Thereare many configurations and leg height options within each serieswhich permit installation into a pre-planned blockout. Also available aresurface mount versions (FN and FSN), some with raised seals, so thattile or carpet can be installed flush to the top of the joint system forminimum visual disruption.

FSC Series are made up of modular sections which slide together toincrease the span of the joint. This series, along with the TwinsertSeries, is designed for joints sized to seismic conditions and providesolutions for extremely large joint gaps by permitting insertion of theflooring materials as an inlay between rubber seals or metal inserts.

The wall selections include easy to install snap-cover all-metalversions such as the WP Series in a variety of joint sizes as wellas the KF Series--all-metal or elastomeric-coated covers featuringrapid spring-anchor fastening.

EMSEAL offers more than 300 products or geometries for interiorfloors and walls to suit a variety of conditions or aesthetic require-ments. For a complete listing and CAD details of interior jointsolutions please visit www.emseal.com.

Interior Floor Joints

Interior Wall Joints

FSC Series

FSN SeriesFN Series

WP Series

FS Series

Twinsert Series

FP Series

KF Series


36

INTERIOR Floors & Walls




Inte

rior

Flo

ors

and

Wal

ls

Joint Sizes(up to)

7/16"

9/16"

3/4"

1"

1 1/4"

Interior Floor Joints

ImageLoadRating

Heavy

Heavy

Standard

Standard

Standard

Standard

Standard

Standard

Standard

Standard

Standard

Standard

Standard

Standard

Standard

Medium

Standard

MovementCapability

3/16" ( +1/8", - 1/16")

3/16" ( +1/8", - 1/16")

3/16" ( +1/8", - 1/16")

3/16" ( +1/8", - 1/16")

3/16" ( +1/8", - 1/16")

3/16" ( +1/8", - 1/16")

3/16" ( +1/8", - 1/16")

3/16" ( +1/8", - 1/16")

3/16" ( +1/8", - 1/16")

3/8" (±3/16")

1/4" (±1/8")

3/8" (±3/16")

3/8" (±3/16")

3/8" (±3/16")

1/4" (±1/8")

3/8" (±3/16")

3/8" (±3/16")

Composition

Solid Aluminum

Solid Aluminum

Alum/Elastomeric

Alum/Elastomeric

Alum/Elastomeric

Alum/Elastomeric

Alum/Elastomeric

Alum/Elastomeric

Alum/Elastomeric

Alum/Elastomeric

Alum/Elastomeric

Alum/Elastomeric

Alum/Elastomeric

Alum/Elastomeric

Stainless/Elastomeric

Solid Aluminum


EMSEAL offers an extended range of products. For more detailed information anddrawings on any products found in these charts please visit www.emseal.com

Note

Surface Mount

Surface Mount

Surface Mount

Surface Mount

Surface Mount

Surface Mount

Smooth Insert

Surface Mount

Surface Mount

Surface Mount

Smooth Insert

EMSEALProduct

ESF 16

ESF 27

FL 21

FN 20/12

FKN 20/12

FTN 20/12

FN 20/12

FKN 20/12

FTN 20/12

FV 35

FG 35

FN 35/15

FTN 35/15

FKN 35/15

ESG 33

FS 50

ES 33


EMSEAL


37





Interior Floor Joints (continued)

Joint Sizes(up to)

1 3/8"

1 1/2"

1 5/8"

2"

Image


MovementCapability

3/8" (±3/16")

1 1/2" (±3/4")

3/8" (±3/16")

3/8" (±3/16")

3/8" (±3/16")

9/16" (±9/32")

3/4" (±3/8")

5/8" (±5/16")

5/8" (±5/16")

5/8" (±5/16")

1/4" (±1/8")

5/8" ( +7/16", - 3/16")

3/4" (±3/8)

5/8" ( +7/16", - 3/16")

3/8" (±3/16")

5/8" ( +7/16", - 3/16")

5/8" ( +7/16", - 3/16")

EMSEALProduct

FS 40

FS 135

FN 35/15

FTN 35/15

FKN 35/15

FN 41/15

FS 75

FP 55

FP 55 MS

FP 55 Ni

FPG 55

FP 60

FP 60 Ni

ES 60

ESG 60

FN 50/20

FKN 50/20

Note

Surface Mount

Surface Mount

Surface Mount

Surface Mount

Brass Caps

Stainless Capped

Smooth Insert

Stainless Capped

Smooth Insert

Surface Mount

Surface Mount -– Tile Over

LoadRating

Medium

Extra Heavy

Standard

Standard

Standard

Standard

Heavy

Standard

Standard

Standard

Medium

Medium

Medium

Medium

Medium

Standard

Standard

Composition

Solid Aluminum

Solid Aluminum

Alum/Elastomeric

Alum/Elastomeric

Alum/Elastomeric

Alum/Elastomeric

Solid Aluminum

Alum/Elastomeric

Alum/Brass/Elastomeric

Alum/SS/Elastomeric

Alum/Elastomeric

Alum/SS/Rubber




Alum/Elastomeric

Alum/Elastomeric


38





Inte

rior

Flo

ors

and

Wal

ls

MovementCapability

3/8" (±3/16")

1 1/2" (±3/4")

7/8" (±7/16")

5/8" (±5/16")

5/8" (±5/16")

1" ( +5/8", - 3/8")

1" ( +5/8", - 3/8")

1" ( +5/8", - 3/8")

1 1/4" (±5/8")

1" ( +5/8", - 3/8")

3/4" (±3/8")

1 1/4" ( +3/4", - 1/2")

1 1/2" (±3/4")

1 1/4" (±5/8")

1 1/4" (±5/8")

1 1/4" (±5/8")


Composition

Solid Aluminum

Solid Aluminum

Alum/Elastomeric

Alum/Elastomeric

Alum/Elastomeric

Alum/Elastomeric

Alum/Brass/Elastomeric

Alum/SS/Elastomeric

Solid Aluminum

Alum/Elastomeric

Solid Aluminum

Alum/Elastomeric

Solid Aluminum

Alum/Elastomeric

Alum/Elastomeric

Alum/SS/Elastomeric

Note

Surface Mount

Surface Mount

Surface Mount

Surface Mount -– Tile Over

Brass Caps

Stainless Capped

Surface Mount

Surface Mount

Surface Mount

Surface Mount

Stainless Capped

Joint Sizes(up to)

2 1/8"

2 3/8"

2 1/2"

2 3/4"

3"

3 1/2"

3 3/4"

EMSEALProduct

FSN 50/15

FS 200

FN 58/20

FN 50/20

FKN 50/20

FP 70

FP 70 MS

FP 70 Ni

FS 110

FS 65/20

FSN 75

FN 90/20

FS 99

FSN 99/20

FP 100

FP 100 Ni

Image


LoadRating

Medium

Extra Heavy

Standard

Standard

Standard

Medium

Standard

Standard

Heavy

Standard

Heavy

Standard

Medium

Medium

Medium

Standard


EMSEAL


39






Joint Sizes(up to)

4"

4 1/2

4 3/4"

5"

5 1/2"

6"

6 1/2"

6 3/4"

8"

10"


MovementCapability

1 1/2" (±3/4")

1 1/4" (±5/8")

2" (±1")

1 1/2" (±3/4")

1 1/4" (±5/8")

1 1/4" (±5/8")

2 3/8" (±1 3/16")

2 1/2" (±1 1/4")

1 1/2" (±3/4")

2 1/2" (±1 1/4")

2" (±1")

1 1/4" (±5/8")

1 1/2" (±3/4")

2 3/8" (±1 3/16")

1 1/4" (±5/8")

1 1/4" (±5/8")

EMSEALProduct

FS 130

FSC 250/100

FS 146

FS 155

FP 135

FSN 110

FS 160

FS 185

FSN 130

FSV 235

FSN 146

FSC 300/150

FSN 155

FSN 160

FSC 350/200

FSC 400/250

Note

Surface Mount

Surface Mount

Surface Mount

Surface Mount

Surface Mount

LoadRating

Heavy

Standard

Medium

Extra Heavy

Medium

Heavy

Heavy

Heavy

Heavy

Heavy

Medium

Standard

Heavy

Heavy

Standard

Standard

Composition

Solid Aluminum

Alum/Elastomeric

Solid Aluminum

Solid Aluminum

Alum/Elastomeric

Solid Aluminum

Solid Aluminum

Solid Aluminum

Solid Aluminum

Solid Aluminum

Solid Aluminum

Alum/Elastomeric

Solid Aluminum

Solid Aluminum

Alum/Elastomeric

Alum/Elastomeric

Image


40





Inte

rior

Flo

ors

and

Wal

ls


LoadRating

Standard

Standard

Medium

Heavy

Extra Heavy

Standard

MovementCapability

1 1/4" (±5/8")

Various

Various

Various

Various

Various

Composition

Alum/Elastomeric

Alum/Elastomeric

Alum/Elastomeric

Solid Aluminum

Solid Aluminum

Alum/Elastomeric

NoteJoint Sizes(up to)

16"

Up to

24"

EMSEALProduct

FSC 550/250

FP/FP

FP/FP

FS/FS

FS/FS

FSC

Image


The TWINSERT system for interior expansionjoints bridges the widest range of joint gaps.

The unique design of TWINSERT allows for the inclusion ofdecorative flooring material between the mechanicalelements including tile, carpet, brushed aluminum orstainless steel. This allows for a final expansion joint tomatch the interior design of the adjacent surfaces.

TWINSERT Interior Expansion Joint System(shown with optional brushed aluminum insert)

Twinsert


EMSEAL


41





Wall and Ceiling Joints

MovementCapability

3/16" ( +1/8", - 1/16")

Maximum open joint: 1 3/4"

Minimum closed joint: 1/4"





3/8" (±3/16")

5/8" (±5/16")

1.0" ( +5/8", - 3/8")

3/8" (±3/16")

1 1/4" (±5/8")

2" (±1")

2" (±1")

Composition

Alum/Elastomeric

Elastomeric Covered

Elastomeric Covered

Solid Aluminum

Coated Aluminum

Alum/Elastomeric

Alum/Elastomeric

Alum/Elastomeric

Solid Aluminum

Solid Aluminum

Solid Aluminum

Solid Aluminum

Joint Sizes(up to)

3/4" to 1"

1/2" to 1 1/2"

1 1/2" to 2 1/2"

1/2" to 3 1/4"

1 1/4" to 1 1/2"

2" to 2 1/2"

2 1/2" to 3"

2 1/8" to 2 1/2"

3 3/4" to 4 1/4"

4"

8"

EMSEALProduct

FN 20/12

KF 55/1530

KF 55/3560

KF 250

FA-AL

FN 35/15

FN 50/20

FN 65/20

FSN 50/20

FSN 99/20

WP 255

WP 255 E2

Image


Note

Surface Mount

Surface Mount

Surface Mount

Surface Mount

Surface Mount

Surface Mount

Corner Joints


Architect: ________________________ Engineer: ________________________ Contractor: _______________________

THE EMSEAL CHECKLIST

Name_____________________________ Company____________________________________ Date________________

Phone______________________ Fax______________________ Email_________________________________________

Job Name_____________________________________ Job Location (City & State) _______________________________

InteriorExterior

INSTALLATION LOCATION FIRE RATING

No Fire Rating

Fire Rating: 1-hr 2-hr 3-hr

Joint Gap Width(s): ___________________________Varies from: ___________ to ___________ (over its length)

EXPANSION GAP INFORMATION

Gap Depth:____________________

Total Footage:____________________

5

6 7 8

Have Gap Dimensions Been Field Measured? Yes / NoSubstrate Surface Temp. _______ Ambient Temp. _______

Substrate Composition: __________________________ (e.g., concrete, brick, metal, etc.)

9

Movement (if known):_______________________

Joint Will Seal Out: Rain/Water Cold/HeatSound Air Vermin Other _________________

1312

Please FAX or Email to EMSEAL Fax: (508) 836-0281 / Email: [email protected] / Phone: (508) 836-0280

www.emseal.com

11

Joint is: Primary SealSecondary Seal

Are There Transitions? Yes (explain) / No_______________________________________________

How Does the Joint Terminate?_____________________________________________

15

FOR HORIZONTAL DECK/FLOOR JOINTS (ONLY)

10

14

1

WallFloor/Deck

2

Above GradeBelow GradeSubmerged

3

CONSTRUCTION TYPE

New ConstructionRetrofit Construction

4

(e.g., ± 1" thermal; ± .5" shear, etc.)

Please include any relevant details when submitting checklist to EMSEAL

EMSEAL CHECKLIST Cat5.0 Copyright © 2011 by EMSEAL Joint Systems, Ltd. All rights reserved.

Is this a Solid SlabCondition?Yes / NoIs this a Split SlabCondition?Yes / NoDoes the Jointhave Blockouts?Yes / No

DECK CONSTRUCTION

Traffic Types (check all that apply):Car Bus Pedestrian Other ______________________

16

17

Please fill in the slab width dimemsions at each "x" . If one substrate of your joint is a wallinstead of a slab, please denote that "x" as "Wall" instead of giving a dimension. If more thanone joint occurs within the same immediate area, please draw them and the appropraitedimensions. Attach additional drawings as needed.

dcallahan

Typewritten Text

dcallahan

Typewritten Text

dcallahan

Typewritten Text

dcallahan

Typewritten Text

Checklist PDF available online at www.emseal.com

dcallahan

Typewritten Text

Keep Updated

@ www.emseal.comTech Data Sheets / Installation Guides / CAD Details

Product Summaries / Application & Installation Videos Industry Links / Product Updates / MSDS Information

Technology Reports / Manufacturing Lead TimesProject Profiles / International Support / Reps & Distributors

Online Conferencing and Live Tech SupportEMSEAL News and Contacts / ... and more.

Get all the latest EMSEAL information.Get all the latest EMSEAL information.Get all the latest EMSEAL information.Get all the latest EMSEAL information.Get all the latest EMSEAL information.Updated DUpdated DUpdated DUpdated DUpdated DAILAILAILAILAILYYYYY.....

www.emseal.com




EMSEAL, LLC120 Carrier Drive

Toronto, Ontario Canada M9W 5R1

Tel. 416-740-2090 / Fax: 416-740-0233

EMSEAL JOINT SYSTEMS, LTD25 Bridle Lane

Westborough, MA USA 01581

Tel. 508-836-0280 / Fax: 508-836-0281

Tel. (Toll Free from US and Canada)800-526-8365

www.emseal.comRev 5.0 06/11 web

For up-to-date CAD Details, Guide Specifications, Tech Data, Install Data,Technical Bulletins, Product Photos, Installation Portfolios, and more please visit:



emseal catalog 2011 webx[1]

Documents