ems catalog complete architectural

EMS FL1-800-432-2204

(561) 588-4780 - fax

EMS NC1-800-343-8154

(704) 391-2267 - fax

EMS TX1-800-996-6061

(281) 656-2297 - fax

EMS MO1-888-822-6061

(314) 344-3349 - fax

Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE and Birmingham, AL

website: www.EasternMetal.com e-mail: [email protected] version: 04/30/14Eastern Metal SupplyQuality Shapes In Aluminum

Sunshade System / Air Foil2-1/8” Air Foil x 16’ 56-63-200 (FL)

6” Air Foil x 24’52-63-1020 (MO)

56-63-600 Wall: .090MILL ORDER 21929-940 (TX)

2” Hollow Blade x 16’80-MF-013 Mill Finish

uses #14 screw

2” Hollow Blade x 16’41-63-830 Mill Finish

2” Solid Blade x 20’52-63-4696 Mill Finish

52-63-3060 (FL) White

2” Blade x 16’41-63-835 (FL) Mill Finish

4” Air Foil x 24’56-63-400 Wall: .080

52-63-1010 (MO) Wall: .080

12” Air FoilMILL ORDER

52-63-11852 (FL)Wall: .188

Architectural 01

7” Air Foil MILL ORDER 52-63-12534 (FL)

8” Air Foil x 24’56-63-800 Wall: .100

10” Air Foil MILL ORDER 56-63-1000 (FL)Wall: .125

Scan QR

Code to view

Architectural

section online:

(FL) items are available to all branches via shuttle.

Sunshade System / Air Foil

4” Self-Mating ChannelMILL ORDER 52-63-420 (TX) Wall: .080

Measures out to 2” x 4” when mated

6” Self-Mating ChannelMILL ORDER 52-63-622 (TX) Wall: .080


8” Self-Mating ChannelMILL ORDER 52-63-11390 (FL) Wall: .080


Pre-Fabricated framing items are also available. Ask your sales representative for more information.

5" Radius Tube x 24'40-63-723 6063 T6 M/F(for louvers)

4" Radius Tube x 24'40-63-724 6063 T6 M/F(for louvers)

3" Radius Tube x 24'40-63-722 6063 T6 M/F

(for louvers)

5" Shadow Box x 24'56-63-905 (FL) 6063 T6 M/F

Wall: .080

4” Half Round

Bull Nose x 24’56-63-202 (FL)

Wall: .083

EMS FL1-800-432-2204

(561) 588-4780 - fax

EMS NC1-800-343-8154

(704) 391-2267 - fax

EMS TX1-800-996-6061

(281) 656-2297 - fax

EMS MO1-888-822-6061

(314) 344-3349 - fax

Eastern Metal SupplyQuality Shapes In Aluminum


website: www.EasternMetal.com e-mail: [email protected] version: 01/14/15

Architectural 02

6” Half Round

Bull Nose x 24’56-63-205 (FL)

Wall: .100


3” Full Round

Bull Nose x 24’56-63-201 (FL) Wall: .083

2” Full Round Bull Nose

MILL ORDER 052295 (FL)4” Full Round

Bull Nose x 24’56-63-204 Wall: .093

Sloped Sunshade

Bullnose x 24’MILL ORDER 52-61-4733 (FL)

Wall: .125

EMS FL1-800-432-2204

(561) 588-4780 - fax

EMS NC1-800-343-8154

(704) 391-2267 - fax

EMS TX1-800-996-6061

(281) 656-2297 - fax

EMS MO1-888-822-6061

(314) 344-3349 - fax



Rect. Tube

Frames

(Mitered for

welding)

Left and Center Pics: Mitered side frames with blades through center mullionFar Right Pic: Pre-Fabricated Flat Bar Outriggers and Mullions

Pre-punched

rectangular

tubes for side

frames and

center mullion

Air Foil

Louver

Blades

Pre-Fabricated Sunshade SystemReady-to-weld - Available mitered or square cut

with pre-punched holes. Rectangular Tube or BarFrames and Air Foil Blades from 2” to 12”1 Fast Assembly 1 Increased Strength 1 Minimal Welding

for a Clean Look 1 Fewer Parts, Less Inventory

Air Foil

Louver

Blades

Rectangular

Tube Frames (Mitered for welding)

Pre-punched

rectangular tubes for

side frames and

center mullion

Half Round Bull Nose(Mechanically attached at sides

and tack welded at mullion)Rectangular Tube

Frames (Fabricated to

accommodate Bull Nose)

1

1

Half Round

Bull Nose Option

Rectangular Bar Outiggers (Tapered and Pre-drilled to accomodate

screw bosses in air foil blades)

Rectangular Bar

Center Mullion(Pre-Punched and

Tapered)

Rectangular Tube Frame

Mechanical System

Air Foil Louver

Blades

Half Round or

Full Round Bull

Nose

Counter

Sunk Holes

Air Foil Louver Blades

Full Round Bull

Nose Option

Pre-Fabricated Sunshade SystemReady-to-Weld or Mechanically Join

Available mitered or square cut with pre-punched holesRectangular Tube or Rectangular Bar Frames & Air FoilBlades from 2” to 12”

1

Side Frame:

Self Mating

Channel

(Mitered)

Frame - can be

rectangular tube or

Self Mating Channel

(Mitered)

Air Foil

Louver Blades

Side Frame: Self Mating

Channel (Mitered & Mated)

Sunshade System SchematicMechanical Self-Mating Snap System

Air Foil Blades from 2” to 12”

Center Mullion - Rectangular Tube

(can be pre-punched)

Architectural 03

EMS FL1-800-432-2204

(561) 588-4780 - fax

EMS NC1-800-343-8154

(704) 391-2267 - fax

EMS TX1-800-996-6061

(281) 656-2297 - fax

EMS MO1-888-822-6061

(314) 344-3349 - fax




Louver ShapesL-1 - Louver Blade x 24’

52-63-1913 (FL) wt/ft: 0.860

51-63-062 (FL) x 20’ wt/ft: 0.860

L-2 - Louver Blade x 20’

51-63-067 wt/ft: 0.405

mates with L-5


51-63-006 (FL) wt/ft: 0.358

mates with L-5


31-63-100 (FL) wt/ft: 0.826

mates with L-4

2 x .75 Channel x 23’ 10”

13-63-262 L5

Wall: .125/.093 wt/ft: 0.440

mates with L-2

4 x 1 Channel x 20’

13-63-273 L4 (with radius)Wall: .105/.080 wt/ft: 0.613

mates with L-7

Architectural 04


2 x 1 x 1/8 Channel

13-63-265 x 20’

13-63-274 (FL) x 24’ wt/ft: 0.563

mates with L-2

EMS FL1-800-432-2204

(561) 588-4780 - fax

EMS NC1-800-343-8154

(704) 391-2267 - fax

EMS TX1-800-996-6061

(281) 656-2297 - fax

EMS MO1-888-822-6061

(314) 344-3349 - fax




Architectural Canopy SchematicAvailable in: Mill Finish & Anodized; Various Lengths & Alloys

Front Gutter

FasciaSide Gutter Fascia

Side

Gutter

Fascia

Self Mating

Pans

Self Mating Pans

Hanger Arm:

Square Tube, Round

Tube or Pipe

Tie Back Clip

Square Tube

support brace

Hanger Arm:

Square Tube, Round

Tube or Pipe

Tie Back Clip

Channel for

support brace

Architectural Canopy:Perspective Assembly

Architectural Canopy:Front View Assembly

Multiple drainage options

available via Gutter Fascia

Front Gutter Fascia removed to display interior components of canopy

Top Lip

of Back

Gutter Fascia

Back Gutter

Fascia

Architectural 05

Front Fascia height can be increased byattaching 2 x 4 angle to the top fascia lip.

Channel for

support brace

Tie Back Clip

Attaches to Support Brace

and Top Fascia Lip

Tie Back Clip

EMS FL1-800-432-2204

(561) 588-4780 - fax

EMS NC1-800-343-8154

(704) 391-2267 - fax

EMS TX1-800-996-6061

(281) 656-2297 - fax

EMS MO1-888-822-6061

(314) 344-3349 - fax




Architectural Canopy

Architectural 06

3 x 6 x .078 Self Mating Canopy

Roof Pan (V-Deck)6063-T6 Mill Finish (3” On Center V)

MILL ORDER 52-63-11677 (FL/NC)(0.078 - Heavy Wall)

3 x 6 Self Mating Canopy

Roof Pan x 24’6063-T6 Mill Finish

56-63-015 (0.065 - Light Wall)

MILL ORDER 20160-020 (TX)(0.078 - Heavy Wall)

2 x 8 Self Mating Canopy Roof PanMILL ORDER 52-63-12535 (FL)

3 x 12 x .050 Carport Roll Form

Roof Pan (2 Rib)Self Mating

Custom Lengths Available

in White & Bronze

3 x .045 Extruded Header

200-WH-019 (FL) White x 24’

200-MB-019 (FL) Bronze x 24’

200-WH-020 (FL) White x 30’

200-MB-020 (FL) Bronze x 30’

4 x 6 x .093 Gutter Fascia x 24’56-63-033 (FL/NC) Mill Finish

56-63-036 (FL) 204-R1 Clear Anodized

56-MB-036 (FL) Bronze

56-WH-036 (FL) White

4 x 8 x .125 Gutter Fascia x 24’56-63-016 (4 x 8 x 4.813)

Mill Finish

4 x 8 x .125 Gutter Fascia x 24’56-63-039 (4 x 8 x 3)

Mill Finish

2” Tie Back Clip x 12’

40-63-262 6063-T6 Mill Finish

Receives 2” Square TubeAlso used as support brace bracket

- Custom lengths, finishes and additional profiles are available on a minimum MILL ORDER basis. - (FL) items are available to all branches via shuttle.

1-1/2” Tie Back Clip

MILL ORDER 52-63-8364 (FL)Receives 1-1/2” Square TubeAlso used as support brace bracket

10” Half Round Bull Nose GutterMILL ORDER 52-63-11415 (FL)*New Die Required

EMS FL1-800-432-2204

(561) 588-4780 - fax

EMS NC1-800-343-8154

(704) 391-2267 - fax

EMS TX1-800-996-6061

(281) 656-2297 - fax

EMS MO1-888-822-6061

(314) 344-3349 - fax




Wal

kway

Sch

emat

ic -

Now

Sto

ckin

g!S

tan

dard

Walk

way S

hap

es -

204 R

1 A

no

diz

ed

Architectural 07

EMS FL1-800-432-2204

(561) 588-4780 - fax

EMS NC1-800-343-8154

(704) 391-2267 - fax

EMS TX1-800-996-6061

(281) 656-2297 - fax

EMS MO1-888-822-6061

(314) 344-3349 - fax




Walkway Systems

Architectural 08


Roof Pan (V-Deck)6063-T6 Mill Finish (3” On Center V)

MILL ORDER 52-63-11677 (FL/NC)(0.078 - Heavy Wall)

3 x 6 Self Mating Canopy

Roof Pan x 24’6063-T6 Mill Finish

56-63-015 (0.065 - Light Wall)

MILL ORDER 20160-020 (TX)(0.078 - Heavy Wall)

2 x 8 Self Mating Canopy Roof PanMILL ORDER 52-63-12535 (FL)

3 x 12 x .050 Carport Roll Form

Roof Pan (2 Rib)Self Mating

Custom Lengths Available

in White & Bronze

WWC-17 “P” Roof Pan x 24’ 2”Wall: .060 Mates with WWC-19

6063-T6 - 204 R1 Anodized

56-63-001 (FL)

1/2 Bottom Clear Anodized

Mates with 2-3/4 Top & 4-1/2 Top21929-001 (TX) x 20’

21929-041 (TX) x 24’

Bottom Clear Anodized

Mates with 2-3/4 Top & 4-1/2 Top21929-004 (TX) x 20’

21929-006 (TX) x 24’

WWC-19 “P” Cap (Flat) x 24’ 2”Wall: .060 Mates with WWC-17


56-63-008

2-3/4 Top Clear Anodized

Mates with 1/2 Bottom & Bottom21929-008 (TX) x 20’

21929-010 (TX) x 24’

4-1/2 Top Clear Anodized

Mates with 1/2 Bottom & Bottom21929-023 (TX) x 20’

21929-012 (TX) x 24’

T-Flashing x 24’56-63-040 (FL)

2” Pan End Cap x 12’ 1”Wall: .085 6063-T6 - Mill Finish

10-63-100 (FL/MO)


EMS FL1-800-432-2204

(561) 588-4780 - fax

EMS NC1-800-343-8154

(704) 391-2267 - fax

EMS TX1-800-996-6061

(281) 656-2297 - fax

EMS MO1-888-822-6061

(314) 344-3349 - fax




Walkway Systems

Architectural 09

4 x 8 x .125 Gutter Fascia x 24’56-63-016 (4 x 8 x 4.813)

Mill Finish

4 x 6 x .093 Gutter Fascia x 24’56-63-033 (FL/NC) Mill Finish




4 x 8 x .125 Gutter Fascia x 24’56-63-039 (4 x 8 x 3)

Mill Finish

3 x 8 x .125 Gutter FasciaMILL ORDER 21929-025M (TX)

4 x 4 x .150 Gutter Beam x 20’6063-T6 Mill Finish

21929-713 (TX)

4 x 6 x .190/.125 Gutter Beam x 24’ 2”6063-T6 - 204 R1 Anodized

56-63-011 (FL)


56-63-013 (FL)

6 x 6 x .130/.190 Gutter Beam6005-T5 Mill Finish

21929-441 (TX) x 20’

21929-452 (TX) x 24’

21929-431 (TX) x 30’

6 x 6 x .150 Gutter Beam x 24’ 6”6063-T6 - 204 R1 Anodized

56-63-038 (FL)


10” Half Round Bull Nose Gutter

MILL ORDER 52-63-11415 (FL)*New Die Required

6.1 x .070 Fascia x 24’6063-T6

204 R1 Anodized

56-63-005 (FL)

6.404 x 1 x .070 Side

Fascia x 24’6063-T6

204 R1 Anodized

(F-2 - w/hook)

56-63-007 (FL)

EMS FL1-800-432-2204

(561) 588-4780 - fax

EMS NC1-800-343-8154

(704) 391-2267 - fax

EMS TX1-800-996-6061

(281) 656-2297 - fax

EMS MO1-888-822-6061

(314) 344-3349 - fax




Walkway Systems6 x 10 x .190 Gutter Beam

GB-13 6063-T6 - 204 R1 Anodized


56-63-029 (FL) x 25’

56-63-030 (FL) x 30’

6063-T6 - Mill Finish

56-63-031(FL) x 25’

56-63-032 (FL) x 30’

6 x 8 x .190 Gutter Beam GB-12-A 6063-T6 - 204 R1

Anodized

56-63-021 (FL) x 25’

56-63-022 (FL) x 30’

6063-T6 - Mill Finish

56-63-023 (FL) x 25’

56-63-024 (FL) x 30’

4 x .080 Gutter Beam

End Cap x 97”


52-63-11157 (FL/TX)

6 x .080 Gutter Beam

End Cap x 97”


52-63-11158 (FL)

4 x .125 Square Tube x 24’ 6”

(.125 radius) 6063-T6 - 204 R1 Anod.

56-63-003 (FL) x .125

4 x .150 Square Tube x 22’(.125 radius) 6063-T6 - 204 R1 Anod.

56-63-010 (FL)

4 x .156 Square Tube Boss

Column

6005T6 Clear Anodized

MILL ORDER 61-63-400 (TX)

4.5 x .093 Square Tube

(.125 radius) 6063-T656-MB-034 (FL) Bronze x 20’

56-MF-035 (FL) Mill Finish x 24’

56-WH-035 (FL) White x 24’

56-MB-035 (FL) Bronze x 24’

6 x .150 Square Tube


56-63-037 (FL) x 24'6" (w/.093

Radius)

6 x .180 Square Tube



Column

6005T6 Clear Anodized


4 x 8 x .190/.150 Rect.

Tube x 24’ 6”

6063-T6 204 R1 Anodized

56-63-014 (FL)

6 x 10 x .190 Rect. Tube x 25’

With Radius


56-63-025 (FL)

56-63-026

(FL) x 30’

6063-T6

Mill Finish

56-63-027 (FL)

56-63-028

(FL) x 30’

6 x 14 x .250 Rect. Tube

With RadiusMILL ORDER

10 x .250 Square Tube x 24’

With Radius

19-63-300 (FL)

6063-T6 Mill Finish

Architectural 10

4 x 6 x .150 Rect. Tube x 24’ 2”

(.125 radius)


56-63-004 (FL)

6 x 8 x .188 Rect. Tube x 25’

With Radius


56-63-017 (FL)

56-63-018

(FL) x 30’

6063-T6

Mill Finish

56-63-019 (FL)

56-63-020

(FL) x 30’


6 x 12 x .250 Rect. Tube x 24’

With Radius

20-63-800 (FL)

6063-T6

Mill Finish

6 x 12 Drain Beam Mill Order

3 x .045 Extruded Header200-WH-019 (FL) White x 24’

200-MB-019 (FL) Bronze x 24’

200-WH-020 (FL) White x 30’

200-MB-020 (FL) Bronze x 30’


Column6005T6 Clear Anodized


4 x .125 Sq Tube x 24’ 6”(.125 radius) 6063-T6

204 R1 Anod.

56-63-003 (FL) x .125

4 x .150 Square Tube x 22’(.125 radius) 6063-T6

204 R1 Anod.

56-63-010 (FL)

2 x 6 x .125 Rect Tube x 24’(202-R1 Anodized)

52-63-13710 (FL)

2 x 6 x .250 Rect Tube x 24’(202-R1 Anodized)

52-63-13711 (FL)




56-WH-035 (FL) White x 24’


4 x 6 x .150 Rect. Tube x 24’ 2”

(.125 radius)


56-63-004 (FL)

EMS FL1-800-432-2204

(561) 588-4780 - fax

EMS NC1-800-343-8154

(704) 391-2267 - fax

EMS TX1-800-996-6061

(281) 656-2297 - fax

EMS MO1-888-822-6061

(314) 344-3349 - fax




Engineered Carport Kit Schematic: FreestandingDesign is based on: IBC 2009, ASCE 7-10 (FL), ASCE 7-05 (listed states*), FBC & NCBC - Latest Editions

Architectural 11

Grade-Level drain

holes to be field drilled

where needed.4-1/2” Post

(2) 1-1/2” Holes

Each Side w/#5

Rebar, Grade 40

Steel

See Architectural p04

for Self-Mating Pans:

Low Wind (shown in diagram):

3 x 12 x .050 Roll Formed

Pans

High Velocity:

3 x 6 x .065 Extruded Pans

EMS will provide pre-fabricatedPosts including notching, 7 top side

holes, bottom side rebar holes (see engineering for details)Engineering available upon request.

Post Max Spacing:

Centerline to

Centerline:

10’ 3-3/4”

Max Height:

10’ - bottom of Gutter

Fascia to top of slab.

1 Custom Sizes Available upon Request1 Can also be used in Walkway applications1 FL Wind Velocity: Low Wind: Vult = 125 mph

High Wind: Vult = 175 mph1 Snow Load = 20 psf1 Roll Form Pan available in: White & Bronze1 Extruded Post & Gutter Available in Bronze & White1 *Also Available: Building Mounted/Attached Carport

System; Sealed Engineering Drawings for:FL, GA, SC, NC, AL, LA, TX

(see Arch p04)

EMS FL1-800-432-2204

(561) 588-4780 - fax

EMS NC1-800-343-8154

(704) 391-2267 - fax

EMS TX1-800-996-6061

(281) 656-2297 - fax

EMS MO1-888-822-6061

(314) 344-3349 - fax



Architectural 12

Engineered Carport Kit Schematic: AttachedDesign is based on: IBC 2009, ASCE 7-10 (FL), ASCE 7-05 (listed states*), FBC & NCBC - Latest Editions

1 *Sealed Engineering Drawings for: FL, GA, SC, NC, AL, LA, TX1 FL Wind Velocity: Low Wind: Vult = 125 mph High Wind: Vult = 175 mph 1 Snow Load: 20 psf1 Custom Sizes Available upon Request1 Can also be used in Canopy applications1 Roll Form Pan available in: White & Bronze1 Extruded Post & Gutter Available in Bronze & White1 Also Available: Freestanding Carport System1 Install Kits Available: includes rebar,

threaded rod, nuts, bolts, screws,and concrete adhesive

Grade-Level drain

holes to be field drilled

where needed.4-1/2” Post

(2) 1-1/2” Holes

Each Side w/#5

Rebar, Grade 40

Steel

See Architectural p04 for

Self-Mating Pans:

Low Wind (shown in diagram):

3 x 12 x .050 Roll Formed Pans

High Velocity:

3 x 6 x .065 Extruded PansEMS will provide pre-fabricated Posts including notching, 7 topside holes, bottom side rebarholes (see engineeringfor details)

Engineering available upon request.

Post Max Spacing:

Centerline to

Centerline:

10’ 3-3/4”

Max Height:

10’ - bottom of Gutter

Fascia to top of slab.

3/8” Base Plate:

shop welded to

column base

Holes for

1/2” Anchors

4-1/2” Post

U-Header

Header installed into

concrete block; brick;

wood framing of building

EMS FL1-800-432-2204

(561) 588-4780 - fax

EMS NC1-800-343-8154

(704) 391-2267 - fax

EMS TX1-800-996-6061

(281) 656-2297 - fax

EMS MO1-888-822-6061

(314) 344-3349 - fax




Engineered Carport Kit

Architectural 13


Roof Pan (V-Deck - 3” on center)

MILL ORDER 52-63-11677 (FL/NC)6063-T6 Mill Finish

Meets High Wind: 175 mph Exposure CSnow Load: 20 psf


Roof Pan x 24’

6063-T6 Mill Finish

MILL ORDER 20160-020 (TX)Meets High Wind: 175 mph Exposure CSnow Load: 20 psf


Roof Pan x 24’

6063-T6 Mill Finish

56-63-015

Not Engineered; Meets Wind: 125 mph Exposure BSnow Load: 20 psf

2 x 8 Self Mating Canopy Roof Pan

MILL ORDER 52-63-12535 (FL)


3 x 12 x .050 Carport Roll Form Roof

Pan (2 Rib) Self Mating Custom Lengths Available in White & Bronze


1 x 3 x 1.6 x .040 Roll Form

Breakform End CapCustom Lengths Available in White & Bronze

Extruded Patio Roof

U-Header x 24’

47153 (FL) White

Wall: .045

4 x 6 x .093 Gutter Fascia x 24’ (6005-T5)

56-63-033 (FL/NC) Mill Finish





56-63-011 (FL)




56-WH-035 (FL) White x 24’


4 x 6 x .150 Rect. Tube x 24’ 2”

(.125 radius)


56-63-004 (FL)

- Custom lengths, finishes and additional profiles are available on a minimumMILL ORDER basis. - (FL) items are available to all branches via shuttle.

Screen Room Enclosure Shapes1 x 2 Open Back x .040 min. (Patio)

200-WH-001 (FL)

42-WH-002 (MO)

White x 24’

200-MB-001 (FL)

42-MB-002 (MO)

Bronze x 24’

200-WH-002 (FL)

White x 30’

200-MB-002 (FL)

Bronze x 30’

EMS FL1-800-432-2204

(561) 588-4780 - fax

EMS NC1-800-343-8154

(704) 391-2267 - fax

EMS TX1-800-996-6061

(281) 656-2297 - fax

EMS MO1-888-822-6061

(314) 344-3349 - fax




2 x 2 Hollow x .040 min. (Patio)

200-WH-003 (FL)

42-WH-001 (MO)

White x 24’

200-MB-003 (FL)

42-MB-001 (MO)

Bronze x 24’

200-WH-004 (FL)

White x 30’

200-MB-004 (FL)

Bronze x 30’

1 x 2 Self-Mating Snap42-WH-005 (MO) White x 24’

200-WH-005 (FL) White x 25’

200-MB-005 (FL) Bronze x 25’

1 x 3 Self-Mating Snap

200-WH-006 (FL) White x 25’

200-MB-006 (FL) Bronze x 25’

1 x 4 Self-Mating Snap

200-WH-007 (FL) White x 24’

200-MB-007 (FL) Bronze x 24’

200-WH-008 (FL) White x 30’

200-MB-008 (FL) Bronze x 30’

2 x 3 x .045 Patio

200-WH-009 (FL)

White x 24’

200-MB-009 (FL)

Bronze x 24’

200-WH-010 (FL)

White x 30’

200-MB-010 (FL)

Bronze x 30’

3 x 2 x .045 Patio

200-WH-011 (FL) White x 24’

200-MB-011 (FL) Bronze x 24’

200-WH-012 (FL) White x 30’

200-MB-012 (FL) Bronze x 30’

2 x 4 x .050 Patio

200-WH-013 (FL)

White x 24’

200-MB-013 (FL)

Bronze x 24’

200-WH-014 (FL)

White x 30’

200-MB-014 (FL)

Bronze x 30’

2 x 5 x .050 Patio

200-WH-015 (FL)

White x 24’

200-MB-015 (FL)

Bronze x 24’

200-WH-016 (FL)

White x 30’

200-MB-016 (FL)

Bronze x 30’

• (FL) items are available to all branches via shuttle.

Architectural 14

10 pc Sub-Bundles 6 pc Sub-Bundles 10 pc Sub-Bundles

6 pc Sub-Bundles 4 pc Sub-Bundles

4 pc Sub-Bundles

4 pc Sub-Bundles 4 pc Sub-Bundles 4 pc Sub-Bundles

2 pc Sub-Bundles

2 x 2 Door Jamb

200-WH-023 (FL) White x 24’

200-MB-023 (FL) Bronze x 24’

6 pc Sub-Bundles

1 x 3 Open Back x .040 min. (Patio)

200-WH-070 (FL)

White x 24’

200-MB-070 (FL)

Bronze x 24’

200-WH-071 (FL)

White x 30’

200-MB-071 (FL)

Bronze x 30’

2 x 3 Door Jamb

200-WH-072 (FL) White x 24’

200-MB-072 (FL) Bronze x 24’

6 pc Sub-Bundles

EMS FL1-800-432-2204

(561) 588-4780 - fax

EMS NC1-800-343-8154

(704) 391-2267 - fax

EMS TX1-800-996-6061

(281) 656-2297 - fax

EMS MO1-888-822-6061

(314) 344-3349 - fax



3” Scallop Tube

42-WH-003 (MO) White x 20’

200-WH-017 (FL)White x 24’

200-MB-017 (FL) Bronze x 24’

200-WH-018 (FL)White x 30’

200-MB-018 (FL) Bronze x 30’

3 x .045 Extruded Header

200-WH-019 (FL) White x 24’

200-MB-019 (FL) Bronze x 24’

200-WH-020 (FL) White x 30’

200-MB-020 (FL) Bronze x 30’

2 pc Sub-Bundles

4 pc Sub-Bundles

Screen Room Enclosure Shapes

5” Extruded Fascia

200-WH-022 (FL)

White x 27’

200-MB-022 (FL)

Bronze x 27’

Extruded T-Gutter

200-WH-021 (FL)

White x 24’

200-MB-021 (FL)

Bronze x 24’

3” x 12” Roll Form Roof Pan (5 Rib)Self Mating

SPECIAL ORDER: Wall: .024

SPECIAL ORDER: Wall: .032

SPECIAL ORDER: Wall: .050 (2 Ribs)

Custom Lengths Available in

White & Bronze

- (FL) items are available to all branches via shuttle.

2 pc Sub-Bundles

Architectural 15

Adjustable Z-Bar

200-WH-024 (FL) White x 17’

200-MB-024 (FL) Bronze x 17’

10 pc Sub-Bundles

1-1/2” x 2-1/8” Receiving Channel

200-WH-065 (FL) White x 24’

200-MB-065 (FL) Bronze x 24’

1-3/4” x 3-1/8” Receiving Channel

200-WH-064 (FL) White x 24’

200-MB-064 (FL) Bronze x 24’

E-Gutter

200-WH-066 (FL) White x 24’

200-MB-066 (FL) Bronze x 24’

200-WH-067 (FL)

White x 30’

200-MB-067 (FL)

Bronze x 30’

E-Fascia

200-WH-068 (FL)

White x 27’

200-MB-068 (FL)

Bronze x 27’

3” Insulated Interlocking Roof Panels Available in 2’ and 4’ widths; Provided in a vari-ety of lengths and colors. With or without FanBeams. Contact your sales rep for more info.Codes shown stocked in FL

200-WH-108 3" (.024) 4' x 9'

200-WH-108FB* 3" (.024) 4' x 9'

200-2WH-108 3" (.024) 2' x 9'

200-WH-132 3" (.024) 4' x 11'

200-WH-132FB* 3" (.024) 4' x 11'

200-2WH-132 3" (.024) 2' x 11'

200-WH-144 3" (.024) 4' x 12'

200-WH-144FB* 3" (.024) 4' x 12'

200-2WH-144 3" (.024) 2' x 12'

200-WH-156 3" (.024) 4' x 13'

200-WH-156FB* 3" (.024) 4' x 13'

200-2WH-156 3" (.024) 2' x 13'

200-WH-180 3" (.024) 4' x 15'

200-WH-180FB* 3" (.024) 4' x 15'

200-2WH-180 3" (.024) 2' x 15'

*with Fan Beam On Center

Screen Room Enclosure Accessories

14/10 Charcoal Pool & Patio

Enclosure Screen x 100’ Rolls

(Pet Screen) NYW-PR36 36”

NYW-PR48 48”

.290 Flat Spline x 1000’

(For Pet Screen)200-CC-035

Rain Carrying Accessories

3” x 4” Downpipe200-DS-001 White x 8'

200-DS-002 Bronze x 8'

200-DS-003 White x 10'

200-DS-004 Bronze x 10'

Paint, Caulk, Etc.47137 Touch Up Paint White

47138 Touch Up Paint Bronze

Fasteners - 5000pc min/boxStocked only in EMS MO

#10 Hex Washer Head Sheet MetalScrew; #8 (1/4" head)

Also available in BronzeProduct Code Description

0-10N150-0 (MO) 1-1/2" Xylan Zinc

0-10N200-0 (MO) 2" White Xylan

0-10N300-0 (MO) 3" White Xylan

Special Order:0-10N75-0 3/4" White Xylan

0-10N100-0 1" White Xylan

0-10N150-1 1-1/2" White Xylan

0-10N400-0 4" White Xylan

200-CC-028 84"

200-CC-029 96"

200-CC-023 102"

200-CC-030 108"

16” Kick Plate Coil x 50’ Rolls47123.50 (FL) White

47122.50 FL) Bronze

EMS FL1-800-432-2204

(561) 588-4780 - fax

EMS NC1-800-343-8154

(704) 391-2267 - fax

EMS TX1-800-996-6061

(281) 656-2297 - fax

EMS MO1-888-822-6061

(314) 344-3349 - fax



Architectural 16

Rain Carrying Accessories3” x 4” Elbow

"A" Elbow

200-AE-001 White

200-AE-002 Bronze

"B" Elbow

200-BE-001 White

200-BE-002 Bronze

3" x 4" Drop Outlet

200-DO-001 Mill Finish

Hinges200-WH-035 White (shown)

200-MB-035 Bronze

Adapter for Closer200-WH-036 White

200-MB-037 Bronze

Door Blank

with 8” Kick

Plate200-WH-032

White

200-MB-032

Bronze

Actual

Door Size:

35-5/8” x 79-1/2”

Daylight Opening

Size:

36” x 80”

Door Hardware Kit200-WH-033

White (shown)

200-MB-033

Bronze

Bugsweep200-WH-034 White (shown)

200-MB-034 Bronze

- (FL) items are available to all branches via shuttle.


Enclosure Screen x 100’ Rolls200-CC-025 36"

200-CC-024 60"

200-CC-026 72"

200-CC-027 78"

Flat Spline x 1000’200-CC-031


Enclosure Screen x 100’ Rolls

(No See Um)NYW-202036 36”

NYW-202072 72”

NYW-202084 84”

NYW-202096 96”

NYW-2020108 108”

Screen Enclosure Shapes - (FL) items are available to all branches via shuttle.

EMS FL1-800-432-2204

(561) 588-4780 - fax

EMS NC1-800-343-8154

(704) 391-2267 - fax

EMS TX1-800-996-6061

(281) 656-2297 - fax

EMS MO1-888-822-6061

(314) 344-3349 - fax



Architectural 17

5” Super Gutter

200-WH-062 (FL) White x 24’

200-MB-062 (FL) Bronze x 24’

200-WH-063 (FL) White x 30’

200-MB-063 (FL) Bronze x 30’

200-WH-078 (FL) White x 40'

200-MB-084 (FL) Bronze x 40'

2” x 4” Self Mating Beam

200-WH-040 (FL) White x 18’

200-MB-040 (FL) Bronze x 18’

200-WH-041 (FL) White x 20’

200-MB-041 (FL) Bronze x 20’

200-WH-042 (FL) White x 30’

200-MB-042 (FL) Bronze x 30’

2” x 5” Self Mating Beam200-WH-043 (FL) White x 18’

200-MB-043 (FL) Bronze x 18’

200-WH-044 (FL) White x 20’

200-MB-044 (FL) Bronze x 20’

200-WH-074 (FL) White x 22’

200-MB-074 (FL) Bronze x 22’

200-WH-045 (FL) White x 24’

200-MB-045 (FL) Bronze x 24’

200-WH-046 (FL) White x 26’

200-MB-046 (FL) Bronze x 26’


200-WH-056 (FL)White x 18’

200-MB-056 (FL) Bronze x 18’

200-WH-057 (FL)White x 20’

200-MB-057 (FL) Bronze x 20’

200-WH-069 (FL)White x 22’

200-MB-069 (FL) Bronze x 22’

200-WH-058 (FL)White x 24’

200-MB-058 (FL) Bronze x 24’

200-WH-059 (FL)White x 28’

200-MB-059 (FL) Bronze x 28’

200-WH-060 (FL)White x 30’

200-MB-060 (FL) Bronze x 30’

200-WH-061 (FL)White x 32’

200-MB-061 (FL) Bronze x 32’


200-WH-047 (FL)White x 18’

200-MB-047 (FL) Bronze x 18’

200-WH-048 (FL)White x 20’

200-MB-048 (FL) Bronze x 20’

200-WH-049 (FL)White x 22’

200-MB-049 (FL) Bronze x 22’

200-WH-050 (FL)White x 24’

200-MB-050 (FL) Bronze x 24’

200-WH-051 (FL)White x 26’

200-MB-051 (FL) Bronze x 26’


200-WH-052 (FL)White x 18’

200-MB-052 (FL) Bronze x 18’

200-WH-053 (FL)White x 20’

200-MB-053 (FL) Bronze x 20’


200-WH-090 (FL)White x 22’

200-MB-090 (FL) Bronze x 22’

200-WH-091 (FL)White x 24’

200-MB-091 (FL) Bronze x 24’

200-WH-092 (FL)White x 28’

200-MB-092 (FL) Bronze x 28’

200-WH-093 (FL)White x 30’

200-MB-093 (FL) Bronze x 30’

200-WH-094 (FL)White x 32’

200-MB-094 (FL) Bronze x 32’


200-WH-095 (FL)White x 24’

200-MB-095 (FL) Bronze x 24’

200-WH-096 (FL)White x 28’

200-MB-096 (FL) Bronze x 28’

200-WH-097 (FL)White x 30’

200-MB-097 (FL) Bronze x 30’

200-WH-098 (FL)White x 32’

200-MB-098 (FL) Bronze x 32’

200-WH-099 (FL)White x 36’

200-MB-099 (FL) Bronze x 36’

200-WH-054 (FL)White x 22’

200-MB-054 (FL) Bronze x 22’

200-WH-055 (FL)White x 26’

200-MB-055 (FL) Bronze x 26’

EMS FL1-800-432-2204

(561) 588-4780 - fax

EMS NC1-800-343-8154

(704) 391-2267 - fax

EMS TX1-800-996-6061

(281) 656-2297 - fax

EMS MO1-888-822-6061

(314) 344-3349 - fax



Screen Room Enclosure Shapes • (FL) items are available to all branches via shuttle.

Square Aluminum Painted Tube - 6063-T619-WH-003 3 x .093 x 24' White 1.298

19-WH-225 3 x 1/8 x 20' White 1.726

19-WH-220 3 x 1/8 x 24' White 1.726

19-MB-235 3 x 1/8 x 24' Bronze 1.726

19-COLOR-240 3 x 1/4 x 24’ ** 3.300

19-WH-245 4 x 1/8 x 20’ White 2.325

19-WH-400 4 x 1/8 x 24' White 2.325

19-MB-246 4 x 1/8 x 24' Bronze 2.325

19-WH-2500 4 x 1/4 x 20’ White 4.500

19-MB-2500 4 x 1/4 x 24’ Bronze 4.500

19-WH-2501 4 x 1/4 x 24’ 6” White 4.500

Architectural Aluminum Painted Angle - 6063-T6

Equal Leg11-COLOR-220 1 x 1 x .062 x 20' ** 0.144

11-WH-222 1 x 1 x 1/8 x 20' White 0.276

11-MB-200 1 x 1 x 1/8 x 20' Bronze 0.276

11-COLOR-210 1-1/2 x 1-1/2 x 1/8 x 20' ** 0.431

51-63-544 2 x 2 x .093 x 20' White 0.440

51-63-543 2 x 2 x .093 x 20' Bronze 0.4400

11-COLOR-376 2 x 2 x 1/8 x 20' ** 0.581

11-WH-325 2 x 2 x 1/4 x 20' 1.124

11-WH-300 3 x 3 x 1/4 x 20' White 1.725

3/4" Picket w/radius HR-13R (.120 Radius)HR-13R-WH20 (FL) White x 20’

HR-13R-BR20 (FL) Bronze x 20’

HR-13R-WH (MO) White x 24’

HR-13R-BR (MO) Bronze x 24’

20 pc sub-bundles

1" Oval PicketMILL ORDER - 52-63-12344 (FL)

1” Picket HR-5HR-5-WH-39 White x 39”

HR-5-WH White x 23’

HR-5-BR Bronze x 23’

20 pc sub-bundles

3/4” Picket HR-13HR-13-WH-1 (FL) White x 19’ 1”

HR-13-BR-1 (FL) Bronze x 19’ 1”

HR-13-WH White x 22’ 5”

HR-13-BR Bronze x 22’ 5”

20 pc sub-bundles

Architectural Aluminum Painted Angle - 6063-T6

Unequal Leg11-COLOR-365 1 x 2 x .062 x 20' ** 0.218

51-63-671 1 x 2 x .093 x 16' White 0.324

51-63-672 1 x 2 x .093 x 16' Bronze 0.324

11-COLOR-370 1 x 2 x 1/8 x 20' ** 0.431

11-COLOR-372 1 x 3 x .062 x 20' ** 0.293

11-COLOR-375 1 x 3 x 1/8 x 20' ** 0.582

51-63-518 1-1/2 x 3 x .093 x 20' White 0.492

51-63-519 1-1/2 x 3 x .093 x 20' Bronze 0.492

52-63-8058 1-3/4 x .632 x .090 x 24’ 3” White 0.247

52-63-8127 1-3/4 x .632 x .090 x 24’ 3” Bronze 0.247

11-WH-390 2 x 3 x 1/8 x 20' White 0.750

11-MB-380 2 x 3 x 1/8 x 20' Bronze 0.750

11-WH-395 2 x 3 x 1/4 x 20' White 1.425

11-COLOR-400 2 x 4 x 1/8 x 20’ ** 0.881

11-WH-396 2 x 4 x 1/4 x 20' White 1.725

11-COLOR-410 2 x 5 x 1/8 x 20' ** 1.031

11-COLOR-413 2 x 5 x .190 x 20' (inside radius)** 1.568

11-WH-412 2 x 5 x .250 x 20' White 2.024

11-COLOR-420 2-1/2 x 7 x .190 x 20' ** 2.138

**COLOR - Available in White (WH), Bronze (MB),

Ivory (IV), and Beige (BG)

For our complete line of Mechanical

Railing shapes, please see the Railing

& Castings section of our catalog.

Hard-Rok

61-00-007Contains no gypsumor chlorides;Quick setting

anchoring cement;

Available in 5 Gallon

Buckets

Quik Rok

61-00-001Anchoring Cement5 Gallon BucketNEVER to be used to

anchor balcony rail-

ing or any similar

human life safety

structures

Architectural 18

Engineered Window Mullion and Clip Extrusions

1 x 3-1/8 Light Mullion x 24’

Wall: 1/8” & 3/8”

54314-MBP-1 (FL) Bronze

54314-WHP-1 (FL) White

54314-DS-1 (FL) Desert Sand

1 x 3-1/8 Heavy Mullion x 24’

Wall: 1/8” & 5/8”



1 x 4 Mullion x 24’

Wall: 1/4”




Wall: 1/4”

35097-MBP-1 (FL) Bronze x 24’

35097-WHP-1 (FL) White x 24’


Wall: 1/4”



Tube

Mullion

Schematic Bay Mullion Schematic

Additional Mullions and Clipsavailable next page (Architectural 20)

Our mullions can be used with any Approved Fenestration Product, under separate approval.

Florida Building Code Approved by Engineering - Tube Mulls: 16051.2 • Bay/Bow Mulls: 16051.1

EMS FL1-800-432-2204

(561) 588-4780 - fax

EMS NC1-800-343-8154

(704) 391-2267 - fax

EMS TX1-800-996-6061

(281) 656-2297 - fax

EMS MO1-888-822-6061

(314) 344-3349 - fax



Architectural 19

EMS FL1-800-432-2204

(561) 588-4780 - fax

EMS NC1-800-343-8154

(704) 391-2267 - fax

EMS TX1-800-996-6061

(281) 656-2297 - fax

EMS MO1-888-822-6061

(314) 344-3349 - fax



Architectural 20

1” Clip x 12’

52-63-8745 (FL)Inserts into 20-WH/MB-2320and 20-WH/MB-2350

2” Clip x 12’

52-63-8746 (FL)Inserts into 2” Rect Tube(.125 Wall)

2” Clip x 12’

52-63-11885 (FL)Inserts into a 2” Rect Tube(.250 wall)

22.56 Mullion x 24’


54306-WHP-1 (FL) White x 24’

456 Mullion x 24’


54308-WHP-1 (FL) White x 24’

906 Mullion x 24’


54307-WHP-1 (FL) White x 24’

1 x 3-1/8 Mullion U-Clip x 20’

52-63-11886 (FL) Mill Finish

Mates with 1 x 3-1/8 Mullions

Fabbed for 1 x 3-1/8 Light Mullion

80008 (FL) x 2-1/4” (3 holes)

Fabbed for 1 x 3-1/8 Heavy Mullion

80007 (FL) x 1-3/4” (3 holes)

2 x 4 x 1/8 Angle L-Clip x 20’

11-63-395 Mill Finish

Mates with 2 x 4 Mullion

Fabbed for 22.5° Mullion; 45° Mullion; 90° Mullion

80006 (FL) x 2-3/4” (4 holes)

Fabbed for 1 x 4 Mullion; 2 x 4 Mullion

80004 (FL) x 3-3/8” (4 holes)

Fabbed for 2 x 6 Mullion

80005 (FL) x 5-3/8” (4 holes)

2 x 5 x 1/8 Angle L-Clip x 20’

11-63-405 Mill Finish


80002 (FL) x 2-1/4” (3 holes)


80003 (FL) x 1-3/4” (3 holes)

1 x 3-1/8 Mullion - H-Clip x 12’


Mates with 1 x 3-1/8 Mullions


80000 (FL) x 2-1/4” (6 holes)


80001 (FL) x 1-3/4” (6 holes)

1 x 4 Mullion - H-Clip x 12’


Mates with 1 x 4 Mullion

Fabbed for 1 x 4 Mullion

80009 (FL) x 3-3/8” (8 holes)

1” U-Clip

52-63-11886 (FL)

Inserts into 1” Rect Tube (.125 Wall)

2” U-Clip

52-63-11887 (FL)

Inserts into 2” Rect Tube (.125 Wall)

1 x 2-3/4 Mullion

Bars x 24’

Wall: .375/.125

20-MB-2320 Bronze

20-WH-2320 White

1 x 4 Mullion

Bars x 24’

Wall: .375/.125

20-MB-2350 Bronze

20-WH-2350 White

Additional Painted Bars on

Standards p36

Non-Engineered Window Mullion and Clip Extrusions

Engineered Window Mullion and Clip ExtrusionsOur mullions can be used with any Approved Fenestration Product, under separate approval.

Florida Building Code Approved by Engineering - Tube Mulls: 16051.2 • Bay/Bow Mulls: 16051.1

ems catalog complete architectural

Documents

fl wall

fl8 air foil x

finish4 air foil x

fl6 air foil x

fl white2 blade x

fl newark

fl items

sloped sunshadebullnose