emr overview - tvbs€¦ · emr3.0 back-board. overview. high density multiplexing scrambling...

EMR Overview

Sumavision’s Enhanced Multimedia Router (EMR) is a standard platform on which users can realize all

Digital TV head end functions. EMR is one rack-unit (1-RU) signal processing platform with flexible

card-insertion structure (6 slots). EMR can support “Any input” (DVB-S/S2/ASI/IP/DS3/E3 and etc.), “Any

processing” (encoding/decoding/multiplexing/scrambling and etc.) and “Any output” (DVB-S/

S2/ASI/IP/DS3/E3 and etc.). EMR is available for any applications beyond your imagination besides

encoding, decoding, multiplexing, transcoding, modulating, etc.

HIGHLIGHTS

Specification Description

Security and stability System / Device / port / program / power five-level hot backup, seamless

switching with intelligent self-test.

Flexible

configuration

One hundred kinds of cards free intermixing, each EMR is a customized solution.

(Including: encoding, transcoding, decoding, reception, adaptation, multiplexing,

scrambling, switching, and other modules).

Highly integration

Card performance rising, help EMR to achieve far more capacity density than

conventional equipment.

(For example: 1U achieve 24 satellite signals receive, 144 programs transcoding,

12 programs encoding, 72 QAM outputs, etc.).

Easy operation and

maintenance

Simple Network with unified platform + highly integrated wiring = simple operation

and maintenance.

Simple expansion Upgrading and expansion only increase or replacement the shelf or cards, saving

the secondary input costs.

Energy saving Good technology design and efficient air duct architecture, bring a 100W green

product.

«ТВБизнес» - официальный дистрибьютор +7-812-600-25-77 TVBS.RU 1

Typical applications

Fig. 1-1 EMR Networking Diagram

Fig. 1-1 EMR Networking Diagram, EMR receives and encodes & compresses the analog or digital TV video

& audio signals; and can also receive and adapt the adaptive signals such as DS3 and ATM; additionally, it

can receive and demodulate the satellite signals as TS, and transmit TS stream into the multiplex level, then

multiplex with EPG information to become a standard DVB stream, which will be encrypted by the scrambler

and CAS, and modulated, finally transmitted on HFC network.


EMR3.0 Back-Board

Overview

High density multiplexing scrambling solution, secure backup protection, massive processing capability, easy

to operate and flexible Web-management.

Appearance

Main Performance Parameters：

IP processing

IP interface

quantity Maximum 4 GbE IP IO, 2+2 backup mode;

IP interface type SFP, support the single mode, multi-mode and electrical interface;

IP encapsulation

Capability

IP protocol ARP, ICMP, IGMPv1/v2/v3 and etc.

FEC Support the forward error correction function and comply with the standards SMPTE

2022-1 and SMPTE 2022-2;

VLAN Support the senior functions of IEEE 802.Q VLAN Tagging;

TS processing

PSI/SI edit Support the automatic/manual search for PSI/SI table under DVB standard, PSIIP

table under ATSC standard and ISDB;

Search PID Support the search for all PIDs (including the non-appointed PID);

TS over RTP/UDP, 1-7 TS packets can be encapsulated;

Single Ethernet port supports 256 logical input/output ports at most; the

maximum band width of single port is as high as 200Mbps;


PSI/SI tables Support the table preview and store function;

Monitoring Support the inquiry for bit rate, effective bit rate and single PID bit rate inputted into

the system;

Others Adapt to 188/204;

Scrambling module

Overview Independent scrambling module, independent control, simple and convenient web

operation;

Capability Maximum scrambling for all output ports;

Amount of ECMs Maximum 6,144 ECMs;

Standards EIS supports DVB and Open-CAS standards;

Simulcrypt Each port supports the simulcrypt of six CASs;

Backup module

Program backup Authorize the controllable and backup modes;

Port backup Authorize the controllable and backup modes;

1+1/2+2 GbE

input backup Backup modes and arbitration conditions are available for setting;

Others

SNTP Support clock synchronization SNTP function;

Warning Complete warning management function;

LCD LCD display page, keypad control and LED state indication;

Upgrade mode On-line and remote upgrade and convenient maintenance;

Security Support dual-power supply and hot-swap;

High integration

Signal receiving

Maximum 24 IRDs for DVB-S/S2/T/T2 FTA streams;

Maximum 20 IRDs for DVB-S/S2/T/T2 encrypted streams;

T2MI de-multiplexing/encapsulation and appointed PLP_ID;

Encoding/

Decoding/

Transcoding

Multi-encoding support: SD/HD MPEG-2/MPEG-4/H.264;

Maximum 24 programs encoding/decoding;

Maximum 144 programs transcoding;

Statistic multiplexing Maximum 180 programs statistic multiplexing;

Modulation Maximum 72 QAM outputs;

Adaption Maximum 30 ASI inputs or outputs;


Encoding & Transcoding Modules

C130AS – Analog SD Encoding Card (New)

Overview

2 channels MPEG-2/H.264 SD analog video encoding and 2 channels analog stereo audio encoding.

Physical Interface

Schematic

diagram

Video Input 2 * Analog CVBS video (BNC, 75 ohms);

Audio Input 2 * Analog Audio (6-pin Phoenix head);

Video

Amount 2

Format H.264 BP/MP/[email protected];

MPEG2 HP@ML, MP@ML;

Standard [email protected];

576I@25fps;

Chroma format 4:2:0;

VBI Support CC608;

Support TT;

Audio

Amount 2

Format

AAC-LC, HE-AAC;

MPEG-1 Layer2;

DRA;

Dolby Digital;

Sampling rate 48kHz/44.1kHz/32kHz;

Volume

adjustment -24 dB ~ + 12dB;


C101AS - MEPG-2 Analog SD Encoding Card

Overview

2 channels MPEG-2 4:2:0 MP@ML analog video encoding and 2 channels analog stereo audio encoding.

Physical Interface

Schematic

diagram



Video

Amount 2

Format MPEG-2 4:2:0 MP@ML;

Standard

PAL;

NTSC;

PAL-N;

PAL-M;

SECAM;

Encoding bitrate 1.5Mb/s - 15Mb/s;

VBI Support CC;

Support TT;

Audio

Amount 2

Format

MPEG-1 layer II;

MPEG-2;

Dolby AC3 (optional);


Sampling

accuracy 16-bit;

Encoding bitrate 64kbps-384kbps;

Volume



C101D - MEPG-2 Digital SD Encoding Card

Overview

2 channels MPEG-2 4:2:0 MP@ML digital video encoding and 2 channels digital audio encoding.

Physical Interface

Schematic

diagram

Video Input 2 * SDI digital video, BNC interface;

Audio Input 2 * AES / EBU stereo input Phoenix head (balanced);

2 * SDI embedded audio stereo input, BNC interface;

Video

Amount 2


Standard

PAL;

NTSC;

PAL-N;

PAL-M;

AUTO (for PAL, NTSC);

Frame rate PAL@25fps;

NTSC@30fps;


VBI Support Closed Caption(608, 708);

Audio

Amount 2

Format MPEG-1 layer II;

Dolby AC3 (optional);


Sampling

accuracy 16-bit;

Encoding bitrate 64kbps ~ 384kbps;

Volume



C160A - MEPG-2 Analog SD Encoding Card (New)

Overview

2 channels MPEG-2 4:2:0 MP@ML analog video encoding and 2 channels analog stereo audio encoding.

Physical Interface

Schematic

diagram



Video

Amount 2


Resolution 720 * 576/480;


576I@25fps;


VBI

Support CC;

Support TT;

Support WSS;

Audio

Amount 2

Format

MPEG-1 layer II;

AAC-LC, HE-AAC v1, HE-AAC v2 ;

Dolby Digital, Dolby Digital Plus;

Sampling rate 48kHz;

Sampling

accuracy 24-bit;

Encoding bitrate 32kbps - 384kbps;

Volume



C160D - MEPG-2 Digital Encoding Card (New)

Overview

2 channels MPEG-2 4:2:0 MP@ML digital video encoding and 4 channels digital stereo audio encoding.

Physical Interface

Schematic

diagram

Video Input 2 * SDI digital video, BNC interface;

Audio Input 2 * 8 SDI embedded audio stereo input, BNC interface;

Video

Amount 2



576I@25fps;

VBI

Support CC;

Support TT;

Support AFD;

Support Bar Data;

Audio

Amount 2 * 8 SDI embedded audio stereo input;

Format

MPEG-1 layer II;

AAC-LC, HE-AAC v1, HE-AAC v2 ;

Dolby Digital, Dolby Digital Plus;

Sampling rate 48kHz;

Sampling

accuracy 24-bit;

Encoding bitrate 32kbps ~ 384kbps;

Volume

adjustment -20 dB ~ +20dB;


C150 - H.264 HD Encoding & Transcoding Card

Overview

1 channel H.264 HD/SD video encoding/transcoding and 8 channels audio encoding.

Physical Interface

Schematic

diagram

Video Input 1 * HD-SDI digital video, BNC interface;

1 * HDMI digital video, HDMI interface;

1 * YPbPr analog component video, extensions via custom DVI interface;

1 * CVBS analog composite video, extensions via custom DVI interface ;

Audio Input 1 * HD-SDI embedded audio (8 selected 4);

1 * HDMI embedded audio (4 selected 4);

4 * AES/EBU digital audio, extensions via custom DVI interface (single

side/Balanced);

2 * Analog stereo audio, extensions via custom DVI interface (single side/Balanced);

Video

Amount 1

Format H.264

Standard

1920 * 1080 60i/59.94i/50i;

1280 * 720 60p/59.94p/50p;

720 * 576 50i;

720 * 480 59.94i;


Encoding bitrate

0.1Mb/s - 25Mb/s;

HD H.264 recommendation rate: 6 Mb/s - 12Mb/s;

SD H.264 recommendation rate: 1.5Mb/s - 3Mb/s;

Audio

Amount 8

Format

AAC-LC, HE-AAC v1, HE-AAC v2;

MPEG-1 Layer2;

DRA;

Dolby Digital Professional, Dolby Digital Plus;



Volume

adjustment Self-adapting;


C150A - H.264 Analog Encoding Card

Overview

2 channels H.264 SD analog video encoding and 2 channels analog stereo audio encoding.

Interface

Schematic

diagram

Video input 2 * CVBS analog videos, BNC interface;

Audio input 2 * Analog stereo audios (single side/balanced);

Video encoding

Quantity 2

Format H.264 BP/MP/[email protected];

Standard 720 x 576 50i;

720 x 480 59.94i;


Encoding level 3.0~3.2, 4.0;

Encoding bitrate H.264 SD recommended bit-rate: 1.5Mb/s - 3Mb/s;

Encoding delay 0.7s;

Audio encoding

Quantity 2

Format

MP2;

AAC-LC;

HE-AAC v1, HE-AAC v2;

Dolby Digital;

Sampling

frequency 48kHz/44.1kHz/32kHz;

Sampling

accuracy 24-bit;


C150D - H.264 Digital Encoding Card

Overview

2 channels H.264 SD digital video encoding and 2 channels digital audio encoding.

Interface

Schematic

diagram

Video input 2 x HD-SDI, BNC;

2 x HDMI, HDMI;

Audio input 2 x HD-SDI, embedded audio (4 in 8);

2 x HDMI, embedded audio (4 in 4);

Video encoding

Quantity 2

Format H.264;

Standard

1920× 1080 60i/59.94i/50i;

1280× 720 60p/59.94p/50p;

720× 576 50i;

720× 480 59.94i;


Encoding level 3.0~3.2, 4.0;

Encoding bitrate

Coding rate: 0.3Mb / s - 25Mb/s;

HD H.264 recommendation rate: 6 Mb/s - 12Mb/s;

SD H.264 recommendation rate: 1.5Mb/s - 3Mb/s;

Encoding delay 0.7s;

Audio encoding

Quantity 2

Format

MP2;

AAC-LC;

HE-AAC v1, HE-AAC v2;

Dolby Digital;

Sampling

frequency 48kHz/44.1kHz/32kHz;

Sampling

accuracy 24-bit;


C150L - H.264 HD Low-latency Encoding Card

Overview

1 channel H.264 HD/SD video coding and 8 channels audio encoding.

Physical Interface

Schematic

diagram

Video Input

1 * HD-SDI digital video, BNC interface;

1 * HDMI digital video, HDMI interface;

1 * YPbPr analog component video, extensions via custom DVI interface;

1 * CVBS analog composite video, extensions via custom DVI interface;

Audio Input

1 * HD-SDI embedded audio (8 selected 4);

1 * HDMI embedded audio (4 selected 4);

4 * AES/EBU digital audio, extensions via custom DVI interface (single

side/Balanced);

2 * analog stereo audio, extensions via custom DVI interface (single side / Balanced);

Video

Amount 1

Format H.264;

Standard

1920 x 1080 60i/59.95i/50i;

1280 x 720 60p/59.94p/50p;

720 x 576 50i;

720 x 480 59.94i;

Chroma format 4:2:0; 4:2:2;

Encoding bitrate

0.1Mb / s - 25Mb/s

HD H.264 recommendation rate: 6 Mb / s - 12Mb / s

SD H.264 recommendation rate: 1.5Mb / s - 3Mb / s

Low-latency

Encoding

Support H.264 Low-latency (minimum 100ms), ultra-low latency (lowest 33.3ms)

encoding mode (Ultra-low latency encoding requires cooperation with the C204)

Audio

Amount 8

Format

AAC-LC, HE-AAC v1, HE-AAC v2;

MPEG-1 Layer2;

DRA;


Dolby Digital Professional, Dolby Digital Plus;


Volume

adjustment Self-adapting;


C131T - MPEG-2/H.264 Transcoding Card (New)

Overview

8 SD or 2 HD channels MPEG-2/H.264 transcoding card

Physical Interface

Schematic

diagram

Video Input Multiplexing input (via EMR3.0 backboard)

Audio Input Multiplexing input (via EMR3.0 backboard)

Video

Amount Single card support up to 8 SD or 2 HD

Format H.264

MPEG2

Standard

1920× 1080 60i/59.94i/50i/30p/29.97p/25p/24p/23.98p

1280× 720 60p/59.94p/50p/30p/29.97p/25p

720× 576 50i

720× 480 59.94i


Encoding level 3.0 ~ 3.2, 4.0 ~ 4.1

H.264 bitrate

SD: min: 300kbps

HD: min: 500kbps

Total input and output rate, max: 120Mbps

MPEG-2 bitrate

SD: min: 600kbps

HD: min: 1000kbps


Statistical

multiplexing Support

Audio

Amount Single program support 2 audio

Format

Mpeg-l layer2

AAC-LC, HE-AAC v1, HE-AAC v2

Dolby Digital, Dolby Digital Plus

LPCM



Sampling

accuracy 24-bit


C132 - High-density Multi MPEG-2/H.264 Transcoding Card (New)

Overview

24 SD or 6 HD channels MPEG-2/H.264 transcoding

Physical Interface

Schematic

diagram

Video Input Multiplexing input (via EMR3.0 backboard)

Audio Input Multiplexing input (via EMR3.0 backboard)

Video

Amount Single card support up to 24 SD or 6 HD

Format H.264

MPEG-2

Standard

1920× 1080 60i/59.94i/50i/30p/29.97p/25p/24p/23.98p

1280× 720 60p/59.94p/50p/30p/29.97p/25p

720× 576 50i

720× 480 59.94i


Encoding level 3.0 ~ 3.2, 4.0 ~ 4.1

H.264 bitrate

SD: min: 300kbps

HD: min: 500kbps


MPEG-2 bitrate

SD: min: 600kbps

HD: min: 1000kbps


Statistical

multiplexing Support

Audio

Amount Single program support 2 audio

Format Mpeg-l layer2

AAC-LC, HE-AAC v1, HE-AAC v2


Dolby Digital, Dolby Digital Plus

LPCM


Sampling

accuracy 24-bit


Decoding Modules

C210AS - Analog SD Decoding Card (New)

Overview

2 channels multi-format (MPEG-2/H.264/AVS+) SD analog video decoding and HD video to SD video

decoding

Physical Interface

Schematic

diagram

Video Output 2 * HD-SDI (BNC, 75 ohms);

Audio Output 2 * Analog balanced audio output (6-pin Phoenix head);

Video

Amount 2

Format

AVS: level 6.0;

AVS-p16;

H.264BP/MP/[email protected];

MPEG-2 SP@ML, MP@HL;

Standard

PAL-B/D/G/H/I/N;

NTSC;

SECAM;


Image

conversion

Supports HD transfer to SD, SD to SD;

Support aspect ratio conversion;

Support the letter-box, center-cut processing;

Audio

Amount 2

Format

DRA

Dolby Digital/Dolby Digital Plus;

AAC-LC, HE-AAC;

MPEG L1/L2;


Multichannel Supports multichannel down-converted to dual-channel stereo output;


Volume

adjustment -70dB ~ 0dB;


C210D – Multi-format Digital Decoding Card (New)

Overview

2 channels multi-format (MPEG-2/H.264/AVS+) HD digital decoding

Physical Interface

Schematic

diagram

Video Output 2 * HD-SDI (BNC, 75 ohms), embedded audio;

2 * HDMI, embedded audio;

Audio Output 2 * Digital audio, embedded SDI (output with video)

2 * Pass-through audio, embedded SDI (output with video)

Control Module control port (RJ-45);

Video

Amount 2

Format

AVS: level 6.0;

AVS-p16;

H.264 BP/MP/[email protected];

MPEG2 SP@ML, MP@HL;

Standard

1080I@25,29.97fps;

720P@50,59.94fps;

[email protected];

576I@25fps;


Image

conversion

Support resolution conversion;



Audio

Amount 2 * Audio decoding

2 * Dolby pass-through

Format

DRA;


AAC-LC, HE-AAC;

MPEG L1/L2;

LPCM;


Dolby Digital Pass through;


Volume

adjustment -70dB ~ +12dB;


C201AS - Analog Decoding Card

Overview

2 channels multi-format (MPEG-2/H.264) SD analog video decoding, support MPEG, AAC, AC3 audio

decoding.

Physical Interface

Schematic

diagram

Video Output 2 * CVBS (BNC, 75 ohms);

Audio Output 2 * Analog balanced audio output (6-pin Phoenix head);

Video

Amount 2

Format H.264: BP/MP/[email protected];

MPEG2: SP@ML, MP@HL;

Standard

PAL;

NTSC;

PAL-M;

PAL-N;

SECAM;


Image

conversion Supports HD down-converted to SD resolution output;

Audio

Amount 2

Format


AAC-LC, HE-AAC;

MPEG L1/L2;



Volume



C202DH - Digital HD Decoding Card

Overview

2 channels multi-format (MPEG-2/H.264) HD/SD digital video decoding

Physical Interface

Schematic

diagram

Video Output 2 * HD-SDI (BNC, 75 ohms), embedded audio;

Audio Output 2 * Digital audio, embedded in SDI (output with video);

2 * AES / EBU (3-pin phoenix), balanced digital audio;

Video

Amount 2

Format H.264: BP/MP/[email protected];

MPEG2: SP@ML, MP@HL;

Standard

1080I@25,29.97fps;

720P@50,59.94fps;

[email protected];

576I@25fps;


Image

conversion

Support resolution conversion;



Audio

Amount 2

Format


AAC-LC, HE-AAC;

MPEG L1/L2;



Volume



C204 - HD 4:2:2 Decoding Card

Overview

2 channels multi-format (MPEG-2/H.264) HD/SD decoding

Physical Interface

Schematic

diagram

Video Output 2 * HD-SDI (BNC, 75 ohms), output same content;

1 * CVBS (BNC, 75 ohms);

Audio Output

2 * Digital audio, embedded in SDI (output with video);

2 * AES / EBU (BNC), unbalanced digital audio;

2 * AUDIO (DB-9), including balance digital audio and balanced analog audio;

Frame

synchronization 1 * GENLOCK (BNC, 75 Ohm)

Video

Amount 2

Format H.264: High422(8bit)@Level4.0;

MPEG2: 422P@HL;

Standard

1080I@25,29.97fps;

720P@50,59.94fps;

[email protected];

576I@25fps;

CVBS output supports PAL, NTSC, PAL-M, PAL-N;

Chroma format 4:2:2, 4:2:0;

Frame

synchronization Support Black-burst, Tri-level reference input;

Low latency Cooperated with C150L, decoding delay can be less than 100ms;

Audio

Amount 2 * Audio decoding

1 * Dolby pass-through


Format

Dolby Digital / Dolby Digital Plus;

AAC-LC, HE-AAC;

MPEG L1 / L2;

LPCM; (Support only one channel)

Dolby Digital Pass-though;



Not support multi-channel surround sound output;

Volume



ASI Interface Modules

C304 - 4 ASI Output Card

Overview

C304 is an ASI output card, which can achieve 4 TS streams output.

Physical Interface

Schematic

diagram

ASI

Interface 4*DVB-ASI (F type BNC, 75 Ω);

Ethernet

Interface 1*10/100Mbps Ethernet Interface(RJ-45);

ASI

Interfac

e

Feature

Standard: EN50083-9;

Packet size: 188/204 Byte packets;

SPTS/MPTS;

Maximum output bitrate: 213Mbps;

Card Function

Function

Configuration Normal multiplexing, pass-through

Alarm

Configuration Card-level, port-level alarm setting;

Control Port Support setting and query based on HTTP, SNMP protocol

Other Functions

Support system bitrate, effective bitrate;

Output supports PCR regeneration function;

Output supports PCR structure adjustment function;


C350 - 5 ASI Input Card

Overview

C350 is an ASI input card, which support 5 TS streams input.

Physical Interface

Schematic

diagram

ASI

Interface 5*DVB-ASI (F type BNC, 75 Ω);

Interface

Feature



SPTS/MPTS;

Maximum input bitrate: 213Mbps;

Card Function

Function

Configuration Normal multiplexing, pass-through;

Alarm


Control Port Support setting and query based on HTTP, SNMP protocol

Other Functions Support system bitrate, effective bitrate, assigned PID bitrate monitoring


C355 - 5 ASI Input/ Output Card

Overview

C355 is a multi-functional card, which can realize input/ output function, support ASI interface two-way

configuration; achieve splitter/combiner function; realize SMPTE 310 function, support SMPTE 310 streams

output.

Physical Interface

Schematic

diagram

ASI

Interface 5*DVB-ASI (F type-BNC, 75 Ω);

Interface

Feature



SPTS/MPTS;

Maximum bitrate: 213Mbps;

SMPTE 310 output bitrate: 19392658bps;

Card Function

Function

Configuration Normal multiplexing, combiner, splitter, SMPTE310;

Port

Configuration Input/output can be configured;

Alarm


Control Port Support setting and query based on SNMP protocol

Other Functions

Support user-defined port name;

Support system bitrate, effective bitrate, assigned PID bitrate monitoring

Output supports PCR regeneration function;

Output supports PCR structure adjustment function;


Adapting Modules

C416 - DS3 adapter card

General

C416 is a multiprotocol card which supports bi-directional adapter between ASI and DS3/E3 interface.

Physical interface

Schematic

diagram

ASI

1*ASI_IN, 1*ASI_OUT;

Connect type: BNC(F), 75Ohm, independently used;


Max bitrate: 213Mbps;

DS3/E3

1*DS3_IN, 2*DS3_OUT;

Connect type: BNC(F), 75Ohm, independently used;

Standard: DS3: ETS 300813 E3: G.703, G.704 , G.751;

Max bitrate: 44.736Mbps(DS3)/34.368Mbps(E3);

Adapter features

Basic features

Support optional DS3/E3 interface;

Support PCR correction;

Support transparent TS transferring, applied for the terrestrial TV network

DS3/E3

Bit order: MSB/LSB;

Frame format: M13/C-bit/No frame;

TS packet length: 188/204;

Support RS encoding and RS decoding;

Support interleave encode and interleave decode;

Support scrambling and descrambling;

ASI output Support specified output system bitrate;

Support 188/204 packet length output;


C417 - Single Frequency Network adapter card

General

C417 is a SFN adapter card for digital terrestrial television, being used with GPS device; it receive one ASI

signal input and output two standard ASI signal which can be identified by actuator. Support Chinese

standard DTMB and European standard DVB-T.

Physical interface

Schematic

diagram

GPS

interface

1*GPS 10M input;

1*GPS 1PPS input;

Adapter

interface

1*ASI input;

2*ASI adapter output;

Adaption

Amount 1*input, 2*adaption outputs (identical);

Technical

Specifications

Support all mode of GB20600-2006;

Support all functions of SFN adapter in GY/T 229.1-2008;

Fully support DVB-T standard, includes ETSIEN200 744, TR101 190, TR101 191,

etc.;

Output speed Auto-adjusting according to the mode;

Standard DTMB, auto-insert SIP packet;

DVB-T, auto-insert MIP packet;

Remarks Must be used with GPS device;


Demodulating& Descrambling Modules

C545 - DVB-S/S2 Demodulating Card

Overview

4 channels satellite signal receiver

Physical Interface

Schematic

diagram

Signal Input 4 * RF input (F-type, 75 ohms);

Demodulation

Amount 4

Frequency

Range 950~2150MHz;

Signal Strength -65dBm ~ -25dBm;

LNB Power 13V, 18V and optional disabled;

Modulation DVB-S: QPSK;

DVB-S2: QPSK, 8PSK, 16APSK, 32APSK;

Symbol rate 1Msps~45Msps;

FEC DVB-S: 1/2, 2/3, 3/4, 5/6, 7/8;

DVB-S2: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10;

Roll-off

coefficient

DVB-S: 0.35;

DVB-S2: 0.35, 0.25, 0.2;

0/22KHz 0 / 22KHz optional support version 1.0,1.1,2.0,2.1 DiSEqC protocol;

Standard DVB-S: ETSI EN 300 421;

DVB-S2: ETSI EN 302 307;

Remark Support for C / Ku-band compatible;

Support BISS descrambling, each port can descramble 8 program;


C544 - DVB-T/T2 Demodulating Card

Overview

4 channels DVB-T/T2/C signal receiver

Physical Interface

Schematic

diagram


DVB-T Demodulation

Modulation

Mode QPSK, 16QAM, 64QAM;

Standard ETSI EN 300 744;

FEC 1/2, 2/3, 3/4, 5/6, 7/8;

Protection

Interval 1/4, 1/8, 1/16, 1/32;

Carrier Mode 2k, 8k;

Input Bandwidth 6MHz, 7 MHz, 8 MHz;

Frequency range 47MHz ~ 870MHz;


DVB-T2 Demodulation

Modulation QPSK, 16QAM, 64QAM, 256QAM;

Standard ETSI EN 302 755;

FEC 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 7/8;

Protection

Interval

1/4, 1/8, 1/16, 1/32, 1/128, 19/128, 19/256;

Carrier Mode 1k, 2k, 4k, 8k, 16k, 32k;

Input Bandwidth 5MHz, 6MHz, 7 MHz, 8 MHz;

Frequency range 47MHz ~ 870MHz;



C561 - ISDB-T/TB Demodulating Card (New)

Overview

4 channels ISDB-T/TB signal receiver

Physical Interface

Schematic

diagram


Demodulation

Amount 4

Modulation DQPSK, QPSK, 16QAM, 64QAM;

Standard ARIB STD-B31;

FEC 1/2, 2/3, 3/4, 5/6, 7/8;

Protection

Interval 1/4, 1/8, 1/16, 1/32;

Input

Bandwidth 6MHz, 7 MHz, 8 MHz;

Frequency

range 42MHz ~ 870MHz;

Effective

receiving level -78dBm ~ -5dBm;


C523CI - DVB-C Demodulating & Descrambling Card

Overview

1 channel DVB-C signal demodulating & descrambling Card

Physical Interface

Schematic

diagram

Demodulation

Interface

1*RF Input (F head, 75 Ohm);

1*RF Loop output (For Monitoring);

DVB-CI

Interface 2*CAM Interface, Support EN50221 standard;

Demodulation

Amount 1

Frequency range 52 ~ 858MHz;


Modulation 64QAM, 128QAM, 256QAM;

Signal Standard Support ITU-T J.83 Annex A/B/C standards under DVB-C

Symbol rate ANNEX A: 3M ~ 7M;

ANNEX B: 64QAM(5.057M), 256QAM(5.360M)

Bandwidth 6M/8M

Descramble

Amount 2 CI card slots

CI Descrambling

performance

Support maximum 32 programs, each program supports up to 32 PID;

The actual number of PID depends on the capability of CAM card.


C525CI - DVB-S/S2 Demodulating & Descrambling Card (New)

Overview

1 channel DVB-S/S2 signal demodulating & descrambling Card

Physical Interface

Schematic

diagram

Demodulation

Interface 1*RF Input(F head, 75 Ohm);

DVB-CI

Interface 2* Independent CAM Interface, Support EN50221 standard;

Serial Port Debugging serial port, RS-232;

Demodulation

Amount 1

Frequency range 950 ~ 2150MHz;

Signal strength -65dBm ~ -25dBm;

LNB Power 13V, 18V, Disable the feeding is optional;

Modulation DVB-S: QPSK;

DVB-S2: QPSK, 8PSK, 16APSK, 32APSK;

Symbol rate 1Msps~45Msps;

FEC DVB-S: 1/2, 2/3, 3/4, 5/6, 7/8;

DVB-S2: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10;

Roll-off

Coefficient

DVB-S: 0.35;

DVB-S2: 0.35, 0.25, 0.2;

0/22KHz 0/22KHz are optional, support DiSEqC protocol with version 1.0, 1.1, 2.0, 2.1 ;

Remarks Support Cu/Ku band;

Descramble

Amount 2 * Independent CAM card slots

CI Descrambling

performance

The maximum transmission rate for single card is 200Mbps;


The actual number of PID depends on the capability of CAM card.

BISS

Descrambling


Support BISS-1, BISS-E Descrambling;


performance Support maximum 64 programs, each program supports up to 16 PID;

C526CI - ABS-S Demodulating & Descrambling Card (New)

Overview

1 channel ABS-S signal demodulating & descrambling Card

Physical Interface

Schematic

diagram

Demodulation

Interface 1*RF Input(F head, 75 Ohm);

DVB-CI

Interface 2* Independent CAM Interface, Support EN50221 standard;

Serial Port Debugging serial port, RS-232;

Demodulation

Amount 1

Frequency

range 950 ~ 2150MHz;

Signal strength -65dBm ~ -25dBm;

LNB Power 13V, 18V, Disable the feeding is optional;

Modulation QPSK, 8PSK;

Symbol rate 1Msps ~ 45Msps;

FEC QPSK: 1/4, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 13/15, 9/10;

8PSK: 3/5, 2/3, 3/4, 5/6, 13/15, 9/10;

Roll-off

Coefficient 0.35, 0.25, 0.2;

Remarks Support all frequency signals of the second generation and third generation

ChinaSat 9 live satellite;

Descramble

Amount 2 * Independent CAM card slots

CI Descrambling

performance



The Actual number of PID depends on the capability of CAM card.


BISS

Descrambling

performance


Support BISS-1, BISS-E Descrambling;



Modulating Modules

C508 - QAM Modulating Card

Overview

6 frequency QAM modulating card

Physical Interface

Schematic

diagram

Output

Interface 1*RF Output (F head, 75 Ohm);

Input

Interface Multiplexing from other card via backboard of EMR

QAM index

Modulation 64QAM,128,256

Output symbol range (Maud) 5.0-7.0 (0.001M stepper)

Frequency Range (MHz) 52 ~ 1000 (single RF output interface Adjacent 6 QAM signal)

tuning frequency step (kHz) 125

Output level range (dBuV) 95 ~ 115

Output Impedance (Ω) 75

MER (dB) (off balance) ≥ 45 @ 64QAM

Carrier to noise ratio (dBc) ≥ 60 @ 256QAM

PCR Jitter (ns) ≤100

Phase noise (dB) ≤-80 @ 1kHz, ≤-103 @ 10kHz, ≤-115 @ 100kHz

PID value specified on the map Support

Each port supports maximum PID

number

64

Output

Frequency Amount 6

RF port 1 * RF output (Adjacent 6 frequency points), F-type interface


1 * RF test port (-20dB) output, SMA type interface

Other port 1 * 10 / 100Base-T CA scrambling mouth; Note: When inserting C471S

CA valid port


C518 - IPQAM Modulating Card (New)

Overview

24 un-adjacent frequency QAM modulating card

Physical Interface

Schematic

diagram

RF interface 1 * RF output, F-type interface;

CTRL

interface 1 * RJ45 10M / 100M adaptive Ethernet port

GbE interface 1 * SFP 100M / 1000M adaptive Ethernet port

RST button 1 * Reset button for resetting the card

GBE Input

GBE maximum rate (Mbps) 960

Anti-Jitter (ms) 0 ~ 1000

QAM Output

Frequency amount 24 (un-adjacent channel)

Modulation 64/128 / 256QAM

Symbol rate range (Mbaud) 3.5 ~ 7.0 adjustable, step: 1kBaud

Frequency Range (MHz) 45 ~ 1000, stepping: 1kHz

Tuning frequency step (kHz) 1





UDP mapping

The maximum UDP stream 1024

The maximum number of

programs per frequency 64


Maximum PID number of each

frequency mapping 256


C508T - DVB-T Modulating Card

Overview

DVB-T/H 4 channels un-adjacent frequencies modulating card

Physical Interface

Schematic

diagram

Modulation

Interface 1*RF Output(F head, 75 Ohm);

Input

Interface Multiplexing from other`s cards via backboard of EMR

QAM index

Modulation QPSK, 16QAM, 64QAM

Output bandwidth (MHz) 5,6,7,8

Frequency range (MHz) 42.000MHz ~ 870.000MHz

Tuning frequency step (kHz) 1

Output level range (dBuV)

1,2,3,4 respectively in the number of the output frequency, the

maximum output level was 120 dBuV, 117 dBuV, 115 dBuV,

114 dBuV, output minimum level of unity for 90 dBuV

Output Impedance (Ω) 75





PID value specified on the map Support

Each port supports maximum PID

number 256

Output

Frequency Amount 4

RF port 1 * RF output (Adjacent eight frequency points), F-type interface

1 * RF test port (-20dB) output, SMA type interface


Other port 1 * 10 / 100Base-T CA scrambling mouth: currently not supported

scrambling


C507S - DVB-S/S2 Modulating Card (New)

Overview

1 channel satellite signal modulating card

Physical Interface

Schematic

diagram

RF interface 1 * RF output, F-type interface;

CTRL interface 1 * RJ45 10M / 100M adaptive Ethernet port

GbE interface 1 * SFP 100M / 1000M adaptive Ethernet port

RST button 1 * Reset button for resetting the card

Modulation

Modulation standards Support DVB-S and DVB-S2 standard

Frequency range (MHz) 950000.000KHz ~ 2150000.000KHz

Output level range (dBuV) 73.0 dBuV ~ 113.0 dBuV, stepping 0.5 dBuV

Symbol rate (Ksps) Supports 50K ~ 45000K, stepping 1KHz

Forward error correction

and modulation

DVB-S with the support QPSK-1/2, QPSK-2/3, QPSK-3/4, QPSK-5/6,

QPSK-7/8;

DVB-S2 support QPSK-1/4; QPSK-1/3; QPSK-2/5; QPSK-1/2;

QPSK-3/5; QPSK-2/3; QPSK-3/4; QPSK- 4/5; QPSK-5/6; QPSK-8/9;

QPSK-9/10; 8PSK-3/5; 8PSK-2/3; 8PSK-3/4; 8PSK-5/6; 8PSK-8 / 9;

8PSK-9/10; 16APSK-2/3; 16APSK-3/4; 16APSK-4/5; 16APSK-5/6;

16APSK-8/9; 16APSK-9/10; 32APSK-3/4; 32APSK-4/5; 32APSK-5/6;

32APSK-8/9; 32APSK-9/10

Roll-off factor 35%, 25%, 20% optional

Other

SNMP protocol Support

Alarm switch control Support

Online upgrade Support

PSI / SI table editor Support


Switching Modules

CA01B - ASI Switching Card

Overview

3 channels ASI inputs switching to 2 channels ASI outputs

Physical Interface

Schematic

diagram

Input Interface

3 * DVB-ASI; BNC (F), 75Ohm, independently;


Packet length: 188/204 Byte packets;

Max-input bitrate: 213Mbps;

Output interface

2 * DVB-ASI; BNC (F), 75Ohm, independently;


Packet length: 188/204 Byte packets;

Max-output bitrate: 213Mbps;

Backup

Backup mode

Main channel priority

Assigned main channel

Assigned backup channel

Single direction switch

Floating mode

Switching conditions

Support assigned PID rate monitoring;

Support port-level effective bitrate monitoring;

Support program-level effective bitrate monitoring;

to backup and backup to main delay;

Backup Levels Support port-level backup and program-level backup;

Support triple level backup ;

Backup Output

Supports power-off through and power-off memory;

Third-level backup support PCR restructure;

Output 2 support setting: the main / backup / third-level backup road and

the same output selection with output 1;

When power-off through, output 1can select an arbitrary input;

Support the custom setting of main


CA04 - IP Switching Card

Overview

2 channels GbE inputs switching to 1 channel GbE output

Physical Interface

Schematic

diagram

Control Interface 1 * 10 / 100Mbps Ethernet port (RJ-45);

Input Interface 2 * 1000Mbps Ethernet (RJ-45);

Output interface 1 * 1000Mbps Ethernet (RJ-45);

Key 1 * Key button, upgrades and manually switch;

LED 1 * Two-color LED status indicator;

Input

Amount 2

Bandwidth 960Mbps

Multicast / Unicast Support

VLAN Support

Protocol ARP/ICMP/IGMP

UDP Port monitoring 128 UDP ports to monitor

MAC Address

Learning 64 MACs per Ethernet port

Output

Amount 1

Bandwidth 960Mbps


VLAN Support


UDP Port monitoring 128 UDP ports to monitor

MAC Address


Switching

Manual switching Support

Automatic switching Support


Switching mode Main channel priority / Assigned main channel / Assigned backup channel

/ Single direction switch / Floating mode

CA05 - RF Switching Card

Overview

2 channels RF inputs switching to 1 channel RF output

Physical Interface

Schematic

diagram

RF input 2 * RF (F-type, 75 ohms);

RF output 1 * RF (F-type, 75 ohms);

ASI output 1 * DVB-ASI (F-type BNC, 75 ohms);

Backup

Input & Output

Input modulation modes: QAM64 / QAM128 / QAM256;

Input frequency range: 52MHz-858MHz;

Input baud rate: 3.5-7.0Mbaud;

through and memory when power off;

ASI output for monitoring after switching the RF output;

Backup mode





Floating mode


Input power-level;

Frequency synchronization;

PID rate;

Backup Levels Support port-level backup;

Output supports pass


CA06 & CA16 - IP Optical Detection Switching Card (New)

Overview

2 channels optical signal inputs switching to 1 channel optical signal output

CA06 Physical Interface

Schematic

diagram

Control Interface 1 * 10 / 100Mbps Ethernet port (RJ-45);

Input Interface 2 * 1000Mbps Ethernet (RJ-45);

Output interface 1 * 1000Mbps Ethernet (RJ-45);

Key 1 * Key button, upgrades and manually switch;


Function Complete monitoring and arbitration, cooperated with CA16

CA16 Physical Interface

Schematic

diagram

Interface 2 * 4 associated LC interfaces, fiber optic and optical switch


Function Complete switching operation of the optical system, cooperated withCA06

Input

Amount 2

Bandwidth 960Mbps


VLAN Support


UDP Port monitoring 128 UDP ports monitoring

MAC Address


Output

Amount 1

Bandwidth 960Mbps



VLAN Support


UDP Port monitoring 128 UDP ports monitoring

MAC Address


Switching

Manual switching Support

Automatic switching Support

Switching mode





Floating mode


Lost connection;

Ethernet packets abnormal;

IP packets abnormal;

UDP packets abnormal;

Switching time [1,60000] ms

Control and monitoring

Remote Online Support

SNMP Support

Web Support

Output status

indication Support


Other Functional Modules

C302SI - EPG Processing Card (New)

Overview

C302SI can achieve EPG generation, EPG multiplexing and data transmission. This card can be adopted

independently for EPG stream generation and also helps to realize frequency plan together with multiplexing

platform.

Physical Interface

Schematic

diagram

Control port GBE_1: RJ-45 100/1000Mbps Self-adaptive;

EPG Edit

Program

Quantity Support 256 programs EPG editing;

File Format

Support XML format EPG file;

Other formats EPG files can be converted into XML format via format conversion

software;

Program

Information Support program info match(ts_id, service_id, nit_id)

Overview

Support short event descriptor;

Support extended event descriptor;

Support content descriptor;

EPG Multiplexing

Program

Quantity 1024

Multiplexing

Mode Automatic multiplexing

Data Transmission

File Quantity Support 16 TS files;

Support parental rating descriptor


Transmission

Function

Support send bitrate configuration;

Support send bitrate control;

C404D - T2MI De-multiplexing Card (New)

General

C404D is a processing card which can support de-multiplex from one T2MI signal to TS.

16 PLP could be de-multiplexed in maximum for one card.

C404D can be used in the scenario like reverse gateway of DVB-T2.

Physical Interface

Schematic

diagram

Input interface 1*DVB-ASI (BNC, 75Ω);

Output interface 4*DVB-ASI (BNC, 75Ω);

De-capsulation Performance

Standard ETSI TS 102 773;

Processing

Capability

1 T2MI signal, support maximum 16 PLPs;

Output bitrate balancing function to ensure the integrity of stream;

Work Mode

Self-adaption:

-- (Normal Mode);

-- (High Efficiency Mode);

Status

Monitoring

T2MI stream system/effective bitrate;

Each PLP system/effective bitrate;

T2MI source information monitoring: T2 Version, PLP Mode, Code Rate,

Modulation, PLP Type, PLP quantity, etc.;


C404R - T2MI Replacing Card (New)

General

C404R can make PLP replacement between two T2MI input streams, and also SI replacement between PLP

is supported.

Physical Interface

Schematic

diagram

Input interface 2*DVB-ASI (BNC, 75Ω);

Output interface 1*DVB-ASI (BNC, 75Ω);

2*DVB-ASI (BNC, 75Ω), mirror output;

Replacement Processing Capability

Standard ETSI TS 102 773;

Processing

Capability Two T2MI signal input, support maximum 4 PLP replacement

Local Content

Replacement &

Insertion

PLP replacement; Service stream localization replacement in the level of PLP;

SI replacement; support localization replacement below: NIT, SDTo, EITo & TOT;

Work Mode High Efficiency Mode;

Application

Environment Fully support DVB-T2 SFN

Encapsulation

Mode T2MI Over TS (ASI or IP) encapsulation output;

Security Main T2MI stream will output automatically when the backup stream is cut off;

Status

Monitoring

T2MI system bitrate/effective bitrate;

PLP bitrate;

Multi-type of T2MI packet rate;

T2MI source information: T2 Version, PLP Mode, Code Rate, Modulation, PLP

Type, PLP quantity , etc.


C603 - HD SDI optical interface card

General

C603 is an optical transmitting or receiving card, can support 1 channel HD/SD digital video signal.

Physical Interface

Schematic

diagram

Signal Input

1 * ASI/SDI/HDSDI Input (BNC F type, 75Ω);

1 * ASI/SDI/HDSDI Loop out (BNC F type, 75Ω);

2 * ASI/SDI/HDSDI Output (BNC F type, 75Ω);

1 * Optical interface (SFP type)

Parameter

Indicator

Support optical communication of ASI/SDI/HDSDI signal;

Support ASI/SDI/HDSDI signal loop out;

Support optical module with SFP interface;

Support optical module of type dual-fiber bi-directional and single-fiber

bi-directional;

Support single mode fiber and multi-mode fiber;

Optical transmission distance: 20km, 40km, 60km, 80km;

Power range of optical transmission output: -5dBm~+3dBm (related with

transmission distance);

Wavelength: 1310nm, 1550nm optional;


C707 - Statistic Multiplexing Card

General

C707 is a statistic multiplexing card, and support three types of processing model, like statistic multiplexing,

repair bitrate, and pass through. C707 can be applied to the system with stringent program bitrate demand,

such as DVB-T, VOD etc.

Physical Interface

Schematic

diagram

Output 4*DVB-ASI (BNC, 75Ω);

Interface

specialty


Length of packet: 188/204 Byte packets;

SPTS/MPTS;

Maximum bitrate: 213Mbps;

Card Function

Statistic

Multiplex

Support three modes: statistic multiplexing, repair bitrate, pass through, and can be

mixed to use;

Processing

capacity

Support 30 SD channels statistic multiplexing/repair bitrate;

Support 6 HD channels statistic multiplexing/repair bitrate;

Support HD&SD mixed statistic multiplexing, 1 HD channel equals to 5 SD

channels;

Other Function

Support settings of priority/ min. & max. bitrate/ repair bitrate;

Support DTS interval adjustment;

Support PCR regenerate function;

Status Monitor

Support monitor of output system bitrate/ valid bitrate of port;

Support input & output video bitrate of program, video compression ratio real time

monitor on the web page;

Support input source error rate monitoring;

Control Interface Support settings & query based on SNMP;


Typical ApplicationsⅠ

ⅠDigital TV head-end platform solutions

Support functions: The complete digital TV head-end network platform achieves source

receiving, multiplexing, scrambling, modulation, RF switching etc.

EMR3.0 can realize satellite receiving, program encoding, adapting and other functions;

one single device can achieve 80 frequencies multiplexing &scrambling or 36 frequencies QAM

modulation.

Capacity: 19 sets EMR3.0 can build a complete head-end platform, which can provide

more than 200 programs, and achieve all the core equipment 1 + 1 hot backup.

Main features: Platform products, Digital TV unified platform, easy for management and


maintenance.

Typical applications: A network company want to build digital TV head-end platform,

about 160 programs, planning 30 frequency points. This platform only use 8 sets of EMR3.0 to

complete. For 1 + 1 hot backup requirement, 17 sets of EMR 3.0 can be realized.


ⅡHigh efficient sub head-end solution

Support functions: One single device can build a sub head-end and complete all

required functions of sub head-end (include satellite receiving, local program encoding,

adapting, multiplexing, scrambling, modulating)

Processing capacity: 1U device can complete eight satellite stream (FTA), four local

programs receiving, multiplexing, modulated output. Customized card combination depends on

customer request.

Main features: flexible combination, can complete a variety of sub head-end

requirement.


ⅢHotel solution

Support functions: 1U device can complete local program encoding, satellite program

receiving, and all programs multiplexing, modulation. One single device can complete hotel sub

head-end.

Processing capacity: 1U device can complete eight satellite stream (FTA), one

scrambled satellite stream, two local programs and all programs multiplexing, modulation

output. Customized card combination depends on customer request of variety hotels.

Main features: flexible combination, easy expansion, one single device can build a hotel

sub head-end.

Typical Case: Beijing hotel.


ⅣEncoding & decoding solution

Support Function: EU300 is based on EMR3.0.It can encoding 8 SD MPEG-2 / H.264

programs, and EMR3.0 (with decoding cards) to complete H.264 / MPEG-2 program decoding.

Processing capacity: 1U EU300 can complete 8 SD multi-format program encoding, 1U

EMR3.0 can complete 12 multi-format (MPEG-2, H.264) HD or SD program decoding.

Main features: High performance capacity of encoding & decoding, industry leading

technical indicators, support 4:2:2 decoding

Typical applications: Program monitoring, satellite broadcast truck and television

production broadcast


Ⅴ Satellite signal monitoring solution

Support Function: EMR3.0 with satellite receiving card, can complete satellite signals

receiving, sent to the monitoring system via IP multicast or unicast.

Processing capacity: 1U devices can receive 24 channels satellite signal, which can be

sent by 512 UDP SPTS / MPTS.

Main features: High performance capacity of satellite signal receiving and IP signaling,

industry leading technical indicators, support multiple protocols

Typical applications: Satellite signal program monitoring


Ⅵ OTT/IPTV head-end solution

Support functions: The complete OTT/IPTV head-end network platform achieves source

receiving, multiplexing, transcoding, IP output.

EMR3.0 can achieves satellite receiving, program encoding and transcoding, multicast /

unicast IP output.

Capacity: 1U device support 24 satellite signal receiving, 12 SD/HD programs encoding

and achieve 144 SD / 36 HD programs transcoding, 512 UDP SPTS/MPTS IP output.

Main features: Platform products, High performance signal processing capabilities, easy


management and maintenance.

Typical applications: Signal receiving and transcoding part of OTT / IPTV head-end.


Typical Applications Ⅱ

IRDs based on EMR

6× 4 CH QPSK Input Card

Details: This application can receive 24 QPSK FTA streams (DVB-S/S2)

from satellites as well as GbE IP, and output in one GbE IP after re-multiplexing.

Input: 24× QPSK (DVB-S/S2), GbE IP

Output: GbE IP

Multi-Encoding& Transcoding based on EMR

6× MPEG-2 Analog SD Encoding Card(12ch MPEG2 SD CVBS)

Details: This application can encode 12× CVBS signals to MPEG-2 streams and output GbE IP after re-multiplexing.

Input: 12× CVBS, 10× balanced stereo, GbE IP

Output: GbE IP

6× MPEG-2 Digital SD Encoding Card(12ch MPEG2 SD SDI)

Details: This application can encode 12× SDI signals to MPEG-2 streams and output GbE IP after re-multiplexing.


Input: 12× SDI, 12× balanced stereo, GbE IP

Output: GbE IP

6× H.264 Digital SD/HD Encoding Card(12ch H.264 SD/HD SDI)

Details: This application can encode 12× SDI signals to H264 streams and output GbE IP after re-multiplexing.

Input: 12× SDI, 12× balanced stereo, GbE IP

Output: GbE IP

6× H.264 Analog SD Encoding Card (12ch H.264 SD CVBS)

Details: This application can encode 12× CVBS signals to H264 streams and output GbE IP after re-multiplexing.

Input: 12× CVBS 12× balanced stereo, GbE IP

Output: GbE IP

Multi-interface transmission

Details: This application can encode 1 H.264 HD 4:2:2 program and support DS3 adaptation with up to 7 ASI inputs.

Simultaneously support modulated followed by DVB-T/S/S2 and output GbE IP after re-multiplexing.

Input: ASI , SDI, Expand port, GBE IP, DS3

Output: GbE IP, DVB-T/S/S2 Modulation, DS3, ASI


Multi-interface receiving

Details: This application can decode 1 MPEG2/H.264 HD 4:2:2 program and support DS3 adaptation with up to 5 ASI inputs.

Simultaneously support demodulated 4 streams followed by DVB-T/T2 and 1 stream received followed by

DVB-S/S2 with descrambling module and output GbE IP after re-multiplexing.

Input: ASI , RF, GBE IP, DS3

Output: GbE IP, CVBS, YPbPr, DS3, ASI

6xMPEG2/H.264 SD Decoding Card (12ch MPEG2/H.264 DEC)

Details: This application can Decode 12× SDI signals to MPEG2/H264 streams

Input: GbE IP

Output: 12× SDI 12× AES/EBU

Bulk Receiving based on EMR

6x DVB-S/S2 satellite receiving cards(24 DVB-S/S2 satellite streams receiving)

Details: This application can receive up to 24 satellite streams

Input: RF

Output: GbE IP

6x DVB-T/T2 Demodulation cards (24 DVB-T/T2 Streams receiving)


Details: This application can receive up to 24 DVB-T/T2 streams

Input: RF

Output: GbE IP

6x QAM Descrambling cards (6ch QAM signals receiving with descrambling module)

Details: This application can receive up to 6 QAM streams with descrambling

Input: RF

Output: GbE IP

HITS based on EMR

4x DVB-S/S2 satellite receiving cards + 2x 6 frequencies QAM output cards(16ch HITS)

Details: This application can receive up to 16 satellite streams and 24-frequencies QAM modulation outputs

Input: RF

Output: GbE IP, RF

ASI-IP Gateway based on EMR

6x ASI input/output cards (30ch ASI-IP Gateway)


Details: This application can receive up to 30 ASI inputs of 30 ASI outputs signals by GBE IP In/out

Input: ASI , GbE IP

Output: GbE IP, ASI

DSNG based on EMR

Details: This application can demodulate 4 DVB-T/T2 streams and encode 1 H264 HD 4:2:2 low delay encoding program and

up to 5 ASI inputs of 5 ASI outputs signals which be modulated by DVB-S/S2 modulating module.

Input: ASI , GbE IP,RF,HD-SDI

Output: GbE IP, ASI, RF

Head-end based on EMR

4x DVB-T Modulation cards with 2x QAM descrambling cards(Hotel Headend)

Details: This application can modulate 4 DVB-T streams by the 2 QAM streams with descrambling module

Input: GbE IP, RF

Output: GbE IP, RF

4xQAM Modulation cards + ASI input & output card + EPG card (500-1000 ch. Head-end)


Details: This application can modulate 4 QAM streams by the 5 ASI I/O signals with EPG generating module

Input: GbE IP, ASI

Output: GbE IP, RF

ATSC-M/H based on EMR

Details: This application can encoding one MPEG2 program and mux programs from other ASI interface, then output by M/H

module

Input: GbE IP, ASI, CVBS, HDSDI

Output: GbE IP, ASI

Decoders based on EMR

DS3/E3 Input MPEG-2 Digital SD Decoders

5× MPEG-2 Digital Decoding Card +1× DS3/E3 Card

Details: This application can decode MPEG-2/H.264 streams from 1× DS3/E3/ASI /GEB IP to 10× HDSDI.

Input: 1× DS3/E3, 1× ASI, GbE IP

Output: 10× HDSDI, 1× ASI, 1× DS3/E3,GBE IP


Gateway based on EMR

ASI<-->IP gateway

4× 5 ASI Input Card+2× 4 ASI Output Cards

Details: This application can realize 20 ASI to GBE IP and IP to 10 ASI gateways.

Input: 1× IP, 20× ASI, GBE IP

Output: 10× ASI, GBE IP

Trans-modulators based on EMR

4× QPSK Card+2× QAM Card

Details: This application can trans-modulate streams from 16× QPSK to 12× QAM after re-multiplexing.

Input: 16× QPSK, GBE IP

Output: 12× QAM, GBE IP

Bulk Transcoder based on EMR

6× MPEG-2 HD to H.264 HD transcoding Card

Details: This application can transcode in between 144× MPEG-2 and H.264 (SD).


emr overview - tvbs€¦ · emr3.0 back-board. overview. high density multiplexing scrambling...

Documents