emi filter shields - qualtek usa accessories/pdfdrawings/qsb...emi filter shields series fan size a...

Part Number QSB A Inch / mm B Inch / mm C Inch / mm D Inch / mm E Inch / mm F Inch / mm QSB-40-01 QSB-60-01 QSB-80-01 QSB-92-01 QSB-119-01 1.654 / 42.0 2.441 / 62.0 3.228 / 82.0 3.700 / 94.0 4.764 / 121.0 1.260 / 32.0 1.969 / 50.0 2.815 / 71.5 3.248 / 82.5 4.133 / 105.0 R .094 / 2.4 R .106 / 2.7 R .126 / 3.2 R .126 / 3.2 R .165 / 4.2 .098 / 2.5 .138 / 3.5 .138 / 3.5 .157 / 4.0 .197 / 5.0 .118 / 3.0 .157 / 4.0 .157 / 4.0 .177 / 4.5 .217 / 5.5 .008 / 0.2 .008 / 0.2 .008 / 0.2 .008 / 0.2 .008 / 0.2 40 01 Ordering Information: Series Fan Size A Type Code EMI Filter Shields Material: High-grade steel (spring V2a) / Material No. 1.4310 Material Thickness: 0.2mm The filter guard EMI-shield sheet is required to avoid intake of the filter into the fan should there be only one large air intake opening. It also protects against EMI/RFI transmissions if needed. The EMI filter shield can be mounted on the inside or the outside of the panel housing. A A B B F E E hole removed (free cross-section: ca. 75%) Ø D C REV. QSB004 7610 Jenther Drive, Mentor, OH 44060 Phone: 1-440-951-3300, Fax: 1-440-951-7252 E-Mail: [email protected] Web: www.qualtekusa.com QSB-30-01 1.260 / 32.0 0.945 / 24.0 R .082 / 2.1 .078 / 2.0 .098 / 2.5 .008 / 0.2 QSB-50-01 2.047 / 52.0 1.575 / 40.0 R .094 / 2.4 .118 / 3.0 .138 / 3.5 .008 / 0.2

Upload: hoangkhuong

Post on 27-Mar-2018

212 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: EMI Filter Shields - Qualtek USA Accessories/PDFDrawings/qsb...EMI Filter Shields Series Fan size A Type code A A B B F E E Hole removed ( Cross-section: ca. 75%) Ø D C Material:

Part Number

QSB

AInch / mm

BInch / mm

CInch / mm

DInch / mm

EInch / mm

FInch / mm

QSB-40-01

QSB-60-01

QSB-80-01

QSB-92-01

QSB-119-01

1.654 / 42.0

2.441 / 62.0

3.228 / 82.0

3.700 / 94.0

4.764 / 121.0

1.260 / 32.0

1.969 / 50.0

2.815 / 71.5

3.248 / 82.5

4.133 / 105.0

R .094 / 2.4

R .106 / 2.7

R .126 / 3.2

R .165 / 4.2

.098 / 2.5

.138 / 3.5

.157 / 4.0

.197 / 5.0

.118 / 3.0

.157 / 4.0

.177 / 4.5

.217 / 5.5

.008 / 0.2

40 01Ordering Information:Series Fan Size A Type Code

EMI Filter ShieldsMaterial: High-grade steel (spring V2a) / Material No. 1.4310Material Thickness: 0.2mmThe filter guard EMI-shield sheet is required to avoid intake of the filter into the fan should therebe only one large air intake opening. It also protects against EMI/RFI transmissions if needed. TheEMI filter shield can be mounted on the inside or the outside of the panel housing.

hole removed(free cross-section: ca. 75%)

Ø D

REV. QSB004

7610 Jenther Drive,Mentor, OH 44060Phone: 1-440-951-3300,Fax: 1-440-951-7252

E-Mail: [email protected]: www.qualtekusa.com

QSB-30-01 1.260 / 32.0 0.945 / 24.0 R .082 / 2.1 .078 / 2.0 .098 / 2.5 .008 / 0.2

QSB-50-01 2.047 / 52.0 1.575 / 40.0 R .094 / 2.4 .118 / 3.0 .138 / 3.5 .008 / 0.2

Shields orchard a hawkesbury harvest success story by jonathan shields

EMI Shields Made From Intercalated Graphite Composites · approximation of the EMI shielding effectiveness of these materials. There are two distinct realms of EMI shielding; far-field

Low Voltage Power Supply Filter Box - Fermilabhuffman/des_cam/vicorfilter/pdf...shield. The top, bottom and center layers of the circuit board will act as EMI shields and will be connected

Qualtek P C P 10Watts DC-DC Dual Output Electronics ... SITE/Stan/images/Power Supplies/pdf_files... · 10Watts DC-DC Dual Output QPDD10-48D Series Qualtek Electronics Corporation

Roman shields