emergency gloves for firefighters - tehpro. vatrogasne rukavice.pdf · diamond en 388 en 407 en...
TRANSCRIPT
CHELSEA
DIAMOND
EN 388 EN 407 EN 659:2003
EN 388 EN 407 EN 659:2003
Holík International s .r.o.Za Dvorem 305, 763 14 Zlín - Št ípaCzech Republic
● A four-layer whole-textile glove with a membrane● The basic and carrier layer of the back of the glove is a textile material Nomex®. The palm is made of Kevlar® speci-ally layered and resistant against heat, abrasion and cutting. Kevlar® with this treatment provides high sensitivity and comfort for work due to its flexibility. There is also Kevlar® reinforcement intensifying protection in the most stressed parts used in the back of the glove.● Technical Kevlar® and Nomex® put together make other two layers that increase heat, abrasion and cutting resistance.● The glove contains a special membrane that does not let through liquids, blood, bacteria and chemicals.● With such material composition Chelsea is predetermined to be used in the most demanding setting maintaining excel-lent sensitivity of fingers.● Chelsea is made with a long Nomex® wristband that ena-bles to put the glove on the coat and tighten it fast.● The gloves are tested and certified in accordance with EN 659:2003 standard - Protecting gloves for firefighters.
Size: 6 – 7 – 8 – 9 – 10 – 11 – 12
E m e r g e n c y g l o v e sf o r f i r e f i g h t e r s
● A four-layer whole-textile glove with a membrane● The basic and carrier layer of the back of the glove is a textile material Nomex®. The palm is made of Kevlar® speci-ally layered and resistant against heat, abrasion and cutting. Kevlar® with this treatment provides high sensitivity and comfort for work due to its flexibility. There is also Kevlar® reinforcement intensifying protection in the most stressed parts used in the back of the glove.● Technical Kevlar® and Nomex® put together make other two layers that increase heat, abrasion and cutting resistance.● The glove contains a special membrane that does not let through liquids, blood, bacteria and chemicals.● With such material composition Diamond is predetermined to be used in the most demanding setting maintaining excel-lent sensitivity of fingers.● Diamond is made with a short knitted Kevlar® wristband.● The gloves are tested and certified in accordance with EN 659:2003 standard - Protecting gloves for firefighters.
Size: 6 – 7 – 8 – 9 – 10 – 11 – 12
CRYSTAL
EN 388 EN 407 EN 659:2003
EN 388 EN 407 EN 659:2003
Holík International s .r.o.Za Dvorem 305, 763 14 Zlín - Št ípaCzech Republic
MERCEDES● A four-layer whole-textile glove with a membrane● The basic and carrier layer of the back of the glove is textile material Nomex®. The palm is made of Kevlar® specially layered and resistant against heat, abrasion and cutting. Kevlar® with this treatment provides high sensitivity and comfort for work due to its flexibility.● The system of kevlar reinforcements with inner anti-shock padding forms high protection of joints. These elements considerably increase protective function of the glove against mechanic risks.● Technical Kevlar® and Nomex® put together make other two layers that increase heat, abrasion and cutting resistance.● The glove contains a special membrane that does not let through liquids, blood, bacteria and chemicals.● Even with maximum mechanic protection the glove keeps high sensitivity. Sensitivity and protection do not conflict any more but they complement each other.● Mercedes is made with a long Nomex® wristband that enables to put the glove on the coat and tighten it fast.● The gloves are tested and certified in accordance with EN 659:2003 standard - Protecting gloves for firefighters.
Size: 6 – 7 – 8 – 9 – 10 – 11 – 12
E m e r g e n c y g l o v e sf o r f i r e f i g h t e r s
● A four-layer whole-textile glove with a membrane● The basic and carrier layer of the back of the glove is a textile material Nomex®. The palm is made of Kevlar® specially layered and resistant against heat, abrasion and cutting. Kevlar® with this treatment provides high sensitivity and comfort for work due to its flexibility. ● The system of kevlar reinforcements with inner anti-shock padding forms high protection of joints. These elements considerably increase protective function of the glove against mechanic risks.● Technical Kevlar® and Nomex® put together make other two layers that increase heat, abrasion and cutting resistance.● The glove contains a special membrane that does not let through liquids, blood, bacteria and chemicals.● Even with maximum mechanic protection the glove keeps high sensitivity. Sensitivity and protection do not conflict any more but they complement each other.● Crystal is made with a short knitted Kevlar® wristband.● The gloves are tested and certified in accordance with EN 659:2003 standard - Protecting gloves for firefighters.
Size: 6 – 7 – 8 – 9 – 10 – 11 – 12
EN 388 EN 407 EN 659:2003
EN 388 EN 407 EN 659:2003
Holík International s .r.o.Za Dvorem 305, 763 14 Zlín - Št ípaCzech Republic
CAROLINE
SYDNEY
● a four-layer combined glove with a membrane● The basic and carrier layer of the back of the glove is a textile material Nomex®. The palm is made of specially treated beef split leather resistant against heat, water and abrasion and it ensures maximum sensitivity and comfort for work. There is also Kevlar® reinforcement intensifying protection in the most stressed parts used in the palm and back of the glove. ● Technical Kevlar® and Nomex® put together make other two layers that increase heat, abrasion and cutting resistance.● The glove contains a special membrane that does not let through liquids, blood, bacteria and chemicals.● With such material composition Caroline is predetermined to be used in the most demanding setting. ● Caroline is made with a short knitted Kevlar® wristband.● The gloves are tested and certified in accordance with EN 659:2003 standard - Protecting gloves for firefighters.
Size: 7 – 8 – 9 – 10 – 11 – 12
E m e r g e n c y g l o v e sf o r f i r e f i g h t e r s
● a four-layer combined glove with a membrane● The basic and carrier layer of the back of the glove is a textile material Nomex®. The palm is made of specially treated beef split leather resistant against heat, water and abrasion and it ensures maximum sensitivity and comfort for work. There is also Kevlar® reinforcement intensifying protection in the most stressed parts used in the palm and back of the glove. ● Technical Kevlar® and Nomex® put together make other two layers that increase heat, abrasion and cutting resistance.● The glove contains a special membrane that does not let through liquids, blood, bacteria and chemicals.● With such material composition Sydney is predetermined to be used in the most demanding setting. ● Sydney is made with a long Nomex® wristband that ena-bles to put the glove on the coat and tighten it fast.● The gloves are tested and certified in accordance with EN 659:2003 standard - Protecting gloves for firefighters.
Size: 7 – 8 – 9 – 10 – 11 – 12
EN 388 EN 407 EN 659:2003
EN 388 EN 407 EN 659:2003
Holík International s .r.o.Za Dvorem 305, 763 14 Zlín - Št ípaCzech Republic
MEGAN
SHARON
● a four-layer whole-leather glove with a membrane● The basic and carrier layer is specially treated and heat, water and abrasion resistant leather - beef split leather ensu-ring maximum sensitivity and comfort for work..● Technical Kevlar® and Nomex® put together make other two layers that increase heat, abrasion and cutting resistance.● The glove contains a special membrane that does not let through liquids, blood, bacteria and chemicals.● Megan is made with a short knitted Kevlar® wristband.● The gloves are tested and certified in accordance with EN 659:2003 standard - Protecting gloves for firefighters.
Size: 7 – 8 – 9 – 10 – 11 – 12
● a four-layer whole-leather glove with a membrane● The basic and carrier layer is specially treated and heat, water and abrasion resistant leather - beef split leather ensu-ring maximum sensitivity and comfort for work..● Technical Kevlar® and Nomex® put together make other two layers that increase heat, abrasion and cutting resistance.● The glove contains a special membrane that does not let through liquids, blood, bacteria and chemicals.● With such material composition Sharon can be used in the most demanding setting. ● Sharon is made with a long wristband that enables to put the glove on the coat and tighten it fast.● The gloves are tested and certified in accordance with EN 659:2003 standard - Protecting gloves for firefighters.
Size: 7 – 8 – 9 – 10 – 11 – 12
E m e r g e n c y g l o v e sf o r f i r e f i g h t e r s
EN 388 EN 407 EN 659:2003
EN 388 EN 407 EN 659:2003
Holík International s .r.o.Za Dvorem 305, 763 14 Zlín - Št ípaCzech Republic
CHEYENNE
DAKOTA
● a four-layer whole-leather glove with a membrane● The basic and carrier layer is specially treated grain lea-ther resistant against heat, water and abrasion and it ensu-res maximum sensitivity and comfort for work. There is also reinforcement in the palm of the glove. ● Technical Kevlar® and Nomex® put together make other two layers that increase heat, abrasion and cutting resistance.● The glove contains a special membrane that does not let through liquids, blood, bacteria and chemicals.● With such material composition Cheyenne can be used in the most demanding setting. ● Cheyenne is made with a short knitted Kevlar® wristband.● The gloves are tested and certified in accordance with EN 659:2003 standard - Protecting gloves for firefighters.
Size: 7 – 8 – 9 – 10 – 11 – 12
● a four-layer whole-leather glove with a membrane● The basic and carrier layer is specially treated grain lea-ther resistant against heat, water and abrasion and it ensu-res maximum sensitivity and comfort for work. There is also reinforcement in the palm of the glove. ● Technical Kevlar® and Nomex® put together make other two layers that increase heat, abrasion and cutting resistance.● The glove contains a special membrane that does not let through liquids, blood, bacteria and chemicals.● With such material composition Dakota can be used in the most demanding setting. ● Dakota is made with a long wristband that enables to put the glove on the coat and tighten it fast.● The gloves are tested and certified in accordance with EN 659:2003 standard - Protecting gloves for firefighters.
Size: 7 – 8 – 9 – 10 – 11 – 12
E m e r g e n c y g l o v e sf o r f i r e f i g h t e r s
EN 388 EN 407 EN 659:2003
EN 388 EN 407 EN 659:2003
Holík International s .r.o.Za Dvorem 305, 763 14 Zlín - Št ípaCzech Republic
DESTINY
MELANIE
● a four-layer whole-leather glove with a membrane ● The basic and carrier layer is specially treated and heat, water and abrasion resistant leather. The palm is made of grain leather, the back is made of split leather ensuring maximum sensitivity and comfort for work. There is also Kevlar® reinforcement intensifying protection in the most stressed parts used in the palm and back of the glove. ● Technical Kevlar® and Nomex® put together make other two layers that increase heat, abrasion and cutting resistance.● The glove contains a special membrane that does not let through liquids, blood, bacteria and chemicals.● With such material composition Destiny is predetermined to be used in the most demanding setting. ● Destiny is made with a short knitted Kevlar® wristband.● The gloves are tested and certified in accordance with EN 659:2003 standard - Protecting gloves for firefighters.
Size: 7 – 8 – 9 – 10 – 11 – 12
● a two-layer whole-leather glove● The glove is made of specially treated grain leather resistant against heat, abrasion and water. High sensitivity and strength together with maximum wearing comfort is the advantage of this leather. Lining is made of knitted Kevlar® that is another protection against heat and cutting.● Melanie is made with a long wristband that enables to put the glove on the coat and tighten it fast.● The gloves are tested and certified in accordance with EN 659:2003 standard - Protecting gloves for firefighters.
Size: 7 – 8 – 9 – 10 – 11 – 12
E m e r g e n c y g l o v e sf o r f i r e f i g h t e r s
EN 388 EN 407 EN 659:2003
EN 388 EN 407
Holík International s .r.o.Za Dvorem 305, 763 14 Zlín - Št ípaCzech Republic
RUBY
WENDY
E m e r g e n c y g l o v e sf o r f i r e f i g h t e r s
● a four-layer whole-leather glove with a membrane● The outer material is the beef split leather specially treated against high temperature and intrusion of water and oils. The leather is also treated to be more resistant against mechani-cal risks. The other layer is Kevlar-Nomex® textile working as another heat barrier. ● The glove contains a special membrane that does not let through liquids, blood, bacteria and chemicals.● Wendy is made with both long and short wristband.● The gloves are tested and certified in accordance with EN 659:2003 standard - Protecting gloves for firefighters.
Size: 7 – 8 – 9 – 10 – 11 – 12
● is mainly for voluntary firefighters. It is used for mecha-nical work to clear of f the results of fire or road accidents. ● The glove has two layers. The outer material is the beef split leather specially treated against high temperature and intrusion of water and oils. The leather is also treated to be more resistant against mechanical risks. The second layer including wrist protection consists of Kevlar® knitted mate-rial by Du Pont. This layer increases protection against heat and mechanical demage.● Ruby is made with a short knitted Kevlar® wristband.● The gloves are tested and certified in accordance with EN 388 and EN 407 standards.
Size: 7 – 8 – 9 – 10 – 11 – 12