embedded system development tools

3

Click here to load reader

Upload: aimag-in

Post on 13-Apr-2017

336 views

Category:

Business


2 download

TRANSCRIPT

Page 1: Embedded System Development Tools

FiO boards and Waijung Blockset is for anyone who needs to create an electronic control board but

don't know how to write a program for it. If want to bring in real world data from any kind of sensors

into a PC, control external hardware from a PC, create a stand-alone system for any kind applications

such as a data logger, automation, or signal processing system, monitor and control anything via

internet.

Then FiO boards and Waijung Blockset is definitely for you.

All you need is Matlab, Waijung Blockset and FiO evaluation board. No need to write a single line of

code.

FiO Mote - ST Based on ARM Cortex-M0 STM32F072CB MCU

o 48MHz CPU Frequency Max

o 128 KB Flash

o 16 KB RAM

o 37 GPIO

o Timers: 1 Advanced, 6 General Purpose, 2

Basic

o Comms: 2 SPI, 2 I2C, 4 USART (+LIN), 1 CAN, 1

USB, 1 CEC

o 10 Channels 12-bits ADC

o 2 Channels 12-bits DAC

o 2.0 - 3.6 V

All IO pins available via pin headers upto 37 pins

Pin compatible with FiO Glide and other stackable

add-on modules, for examples;

o Temperture/Humidity/Pressure/Light Sensors module

Page 2: Embedded System Development Tools

o Current sense module (to aid low power design)

o Power supply module

o Motor driver module

Onboard 8MHz crystal (for HSE clock)

SWD Debugger port available

Program via built-in STMicroelectronics' UART IAP Protocol (aMG USB Connect required for USB-

to-serial conversion)

Support Automatic Compile and Download when working with Matlab & Simulink, Waijung

Blockset, and STM32F0 Target

FiO Glide

Based on ARM Cortex-M0 nRF51422 MCU

o 16MHz CPU Frequency Max

o 256 KB Flash (without Aimagin

Bootloader and S310 ANT/BLE Soft

Device)

o 128 KB Flash (with Aimagin Bootloader

and SoftDevice)

o 16 KB RAM

o 31 GPIO

o 2.4 GHz RF Transceiver upto 2Mbps data

rates

o Timers: 1 x 32-bits, 2 x 16-bits

o Comms: SPI, I2C, USART, AES, RTC,

Quadrature Decoder

o 8 Channels 10-bits ADC

o 1.8 - 3.6 V

Approximate Range (with default short antenna):

o Outdoor line-of-site: 100 m

o Indoor between different rooms with wall: 40 m

All IO pins available via pin headers upto 31 pins

Pin compatible with FiO Mote and other stackable add-on modules, for examples;

o Temperture/Humidity/Pressure/Light Sensors module

o Current sense module (to aid low power design)

Power supply module

Motor driver module

Onboard RTC crystal

SWD Debugger port available

Page 3: Embedded System Development Tools

Program via UART using Aimagin bootloader (aMG USB Connect required for USB-to-serial

conversion)

Support Automatic Compile and Download when working with Matlab & Simulink, Waijung

Blockset, and nRF51 Target

More background information

FiO Mote - ST Starter Pack The starter pack include:

1x FiO Mote - ST

1x aMG USB Connect

1x aMG PWS 3V3/5V v2

1x USB Cable

About FiO Mote - ST

Based on ARM Cortex-M0 STM32F072CB MCU

o 48MHz CPU Frequency Max

o 128 KB Flash

o 16 KB RAM

o 37 GPIO

o Timers: 1 Advanced, 6 General Purpose, 2

Basic

o Comms: 2 SPI, 2 I2C, 4 USART (+LIN), 1 CAN, 1 USB, 1 CEC

o 10 Channels 12-bits ADC

o 2 Channels 12-bits DAC

o 2.0 - 3.6 V

All IO pins available via pin headers upto 37 pins

Pin compatible with FiO Glide and other stackable add-on modules, for examples;

o Temperture/Humidity/Pressure/Light Sensors module

o Current sense module (to aid low power design)

o Power supply module

o Motor driver module

Onboard 8MHz crystal (for HSE clock)

SWD Debugger port available

Program via built-in STMicroelectronics' UART IAP Protocol (aMG USB Connect required for USB-

to-serial conversion)

Support Automatic Compile and Download when working with Matlab & Simulink, Waijung

Blockset, and STM32F0 Target

https://www.aimagin.com