email your comments to: …shop.bsigroup.com/upload/shared-standards/new-2013-national... · bs...
TRANSCRIPT
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 10008:2008 Evidential weight and legal admissibility of electronic
information. Specification
IDT/1/3 current Revision in progress
BS 1044-1:2008 Specification for gauge blanks -- Plug, ring and calliper
gauges
TDW/4 current Confirmation
BS 1070:1993 Specification for black paint (tar-based) STI/27 confirmed (2008) Reconfirmation
BS 1088-1:2003 Marine plywood -- Requirements B/541 confirmed (2008) Reconfirmation
BS 1088-2:2003 Marine plywood -- Determination of bonding quality
using the knife test
B/541 confirmed (2008) Reconfirmation
BS 1109:1943 Specification for cold forged mild steel rivets for cold
closing
FME/9 obsolescent (2010) Withdrawal
BS 1129:1990 Specification for portable timber ladders, steps, trestles
and lightweight stagings
B/512 confirmed (2008) Reconfirmation
BS 1133-10.2:1991 Packaging code. Metal containers -- Metal drums PKW/0/-/8 confirmed (2008) Reconfirmation
BS 1133-18:1991 Packaging code -- Packaging in glass PKW/0/-/7 obsolescent (2008) Withdrawal
BS 1139-1.2:1990 Metal scaffolding. Tubes -- Specification for aluminium
tube
B/514 confirmed (2008)
BS 1139-4:1982 Metal scaffolding -- Specification for prefabricated steel
splitheads and trestles
B/514 confirmed (2008) Reconfirmation
BS 1154:2003 Natural rubber compounds. Specification PRI/54 confirmed (2008)
BS 1155:2003 Natural rubber compounds for extrusion. Specification PRI/54 confirmed (2008) Reconfirmation
BS 1170:1983 Recommendations for treatment of water for marine
boilers
CII/62 confirmed (2008) Reconfirmation
BS 1192:2007 Collaborative production of architectural, engineering
and construction information. Code of practice
B/555 current Confirmation
BS 1196:1989 Specification for clayware field drain pipes and junctions B/505 confirmed (2008) Reconfirmation
BS 1202-1:2002 Specification for nails -- Steel nails B/518 confirmed (2008) Reconfirmation
BS 1202-2:1974 Specification for nails -- Copper nails B/518 confirmed (2008) Reconfirmation
BS 1202-3:1974 Specification for nails -- Aluminium nails B/518 confirmed (2008) Reconfirmation
BS 1211:1958 Specification for centrifugally cast (spun) iron pressure
pipes for water, gas and sewage
PSE/10 partially replaced by
BS 4772:1988
Withdrawal
BS 1217:2008 Cast stone. Specification B/524/4 current Confirmation
BS 1262:2002 Metal packaging. Round lever-lid metal containers for
surface coatings. Specification
PKW/0/-/8 confirmed (2008) Reconfirmation
BS 1336:1971 Specification for knotting STI/3 confirmed (2008) Reconfirmation
BS 1339-1:2002 Humidity -- Terms, definitions and formulae CPI/29 confirmed (2008)
BS 1363-5:2008 13 A plugs, socket-outlets, adaptors and connection
units -- Specification for fused conversion plugs
PEL/23 current Revision in progress
BS 1411:1972 Specification for printers' cards and blanks (terms and
sizes)
I/- current Confirmation
BS 1425-1:1991 Cleanliness of fillings and stuffings for bedding,
upholstery and other domestic articles -- Specification
for fillings and stuffings other than feather and/or down
TCI/66 confirmed (2008) reconfirmation
BS 1427:2009 Guide to on-site test methods for the analysis of waters EH/3/2 current Confirmation
BS 1428-D1:1965 Microchemical apparatus. Volumetric analysis --
Specification for burettes with pressure-filling device and
automatic zero
LBI/1/2 obsolescent (2010) Withdrawal
BS 1434:1985 Specification for copper for electrical purposes: copper
sections in bars, blanks and segments for commutators
NFE/34 confirmed (2008) Reconfirmation
BS 1439:1992 Specification for single-ply wet-creped paper towelling I/- current Confirmation
Updated Nov 2013 1 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 1460:1967 Method for determination of apparent density after
compaction of precipitated calcium carbonate
I/- current Confirmation
BS 1473:1972 Specification for wrought aluminium and aluminium
alloys for general engineering purposes - rivet, bolt and
screw stock
NFE/35 confirmed (2008) Reconfirmation
BS 1489:1972 Specification for the packaging of covered winding wires
for electrical purposes
GEL/55 obsolescent (2008) Withdrawal
BS 1524:1993 Specification for cellulose acetate moulding materials PRI/82 confirmed (2008) Reconfirmation
BS 1563:1949 Specification. Cast iron sectional tanks (rectangular) PVE/20 obsolescent (2008) withdrawal
BS 1596:1992 Specification for fibreboard drums PKW/0/-/4 obsolescent (2008) Withdrawal
BS 16:1974 Specification for telegraph material (insulators, pole
fittings, etc.)
TCT/- current Confirmation
BS 1619-2:1988 Re-usable hypodermic syringes for insulin injection --
Specification for syringes for use with insulin of strength
100 units per millilitre
CH/84 obsolescent (2008) Withdrawal
BS 1659:1950 Specification for tractive armature direct current neutral
track and line relays for railway signalling
GEL/9 obsolescent (2009) Withdrawal
BS 1685:2008 Bevel protractors (mechanical and optical).
Requirements and test methods
TDW/4 current Confirmation
BS 1715-1:1991 Analysis of soaps -- General introduction, sampling, and
test for presence of synthetic anionic-active surface
active agents
CII/34 confirmed (2008) Reconfirmation
BS 1745:1951 Specification for alternating-current relays for railway
signalling: track relays (double-element, 2-position), line
relays (single-element, 2-position)
GEL/9 obsolescent (2009) Withdrawal
BS 1749:1985 Recommendations for alphabetical arrangement and the
filing order of numbers and symbols
IDT/2/2 obsolescent (2008) Withdrawal
BS 1781:1981 Specification for linen and linen union textiles TCI/66 confirmed (2008) Reconfirmation
BS 18004:2008 Guide to achieving effective occupational health and
safety performance
HS/1 current Confirmation
BS 1808:1985 Specification for cut business forms and letterheads I/- current Confirmation
BS 1846-2:1968 Glossary of terms relating to solid fuel burning
equipment -- Industrial water heating and steam raising
installations
E/- obsolescent (2010) withdrawal
BS 1873:1975 Specification for steel globe and globe stop and check
valves (flanged and butt-welding ends) for the
petroleum, petrochemical and allied industries
PSE/18/2 confirmed (2007) Reconfirmation
BS 1881-112:1983 Testing concrete -- Methods of accelerated curing of
test cubes
B/517/1 obsolescent (2010) Withdrawal
BS 1881-201:1986 Testing concrete -- Guide to the use of non-destructive
methods of test for hardened concrete
B/517/1 obsolescent (2010) Withdrawal
BS 1918-1:1978 Glass container finishes. -- Specification for continuous
thread finish
PKW/0/-/7 confirmed (2008) Reconfirmation
BS 1918-2:1981 Glass container finishes. -- Specification for crown finish PKW/0/-/7 obsolescent (2008) withdrawal
BS 192-2:1998 Open-ended wrenches -- BS and Whitworth MTE/15 confirmed (2008) Reconfirmation
BS 1924-1:1990 Stabilized materials for civil engineering purposes --
General requirements, sampling, sample preparation
and tests on materials before stabilization
B/510 obsolescent (2009) Withdrawal
BS 1924-2:1990 Stabilized materials for civil engineering purposes --
Methods of test for cement-stabilized and lime-stabilized
materials
B/510 obsolescent (2009) Withdrawal
BS 1974:1953 Specification for large aluminium alloy rivets ($9H in. to
1 in. nominal diameters)
FME/9 obsolescent (2010) Withdrawal
Updated Nov 2013 2 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 1982-0:1990 Fungal resistance of panel products made of or
containing materials of organic origin -- Guide to
methods for determination
B/515 confirmed (2008) Reconfirmation
BS 1982-1:1990 Fungal resistance of panel products made of or
containing materials of organic origin -- Method for
determination of resistance to wood-rotting
Basidiomycetes
B/515 confirmed (2008) Reconfirmation
BS 1982-2:1990 Fungal resistance of panel products made of or
containing materials of organic origin -- Method for
determination of resistance to cellulose-decomposing
microfungi
B/515 confirmed (2008) Reconfirmation
BS 1982-3:1990 Fungal resistance of panel products made of or
containing materials of organic origin -- Methods for
determination of resistance to mould or mildew
B/515 confirmed (2008) Reconfirmation
BS 1998:1970 Specification for triphenyl phosphate I/- current Withdrawal
BS 2035:1966 Specification for cast iron flanged pipes and flanged
fittings
PSE/10 partially replaced by
BS 4772:1988
Withdrawal
BS 2037:1994 Specification for portable aluminium ladders, steps,
trestles and lightweight stagings
B/512 confirmed (2008) Reconfirmation
BS 2051-1:1973 Tube and pipe fittings for engineering purposes --
Copper and copper alloys capillary and compression
tube fittings for engineering purposes
NFE/34 obsolescent (2008) Withdrawal
BS 2051-2:1984 Tube and pipe fittings for engineering purposes --
Specification for olive type copper alloy compression
tube fittings
NFE/34 obsolescent (2008) Withdrawal
BS 2058:1961 Specification for Lunge-Rey weighing pipette LBI/1/2 obsolescent (2010) Withdrawal
BS 2081-1:1998 Closets for use with chemicals -- Specification for
portable closets
B/505 confirmed (2008) Reconfirmation
BS 2081-2:1998 Closets for use with chemicals -- Specification for
permanently installed closets
B/505 confirmed (2008) Reconfirmation
BS 215-1:1970 Specification for aluminium conductors and aluminium
conductors, steel-reinforced for overhead power
transmission -- Aluminium stranded conductors
GEL/20/16 confirmed (2008) Reconfirmation
BS 215-2:1970 Specification for aluminium conductors and aluminium
conductors, steel-reinforced for overhead power
transmission -- Aluminium conductors, steel-reinforced
GEL/20/16 confirmed (2008) Reconfirmation
BS 2452:1954 Specification for electrically driven jib cranes mounted
on a high pedestal or portal carriage (high pedestal or
portal jib cranes)
MHE/3/3 obsolescent (2009) Withdrawal
BS 2464-3:1968 Specification for hose couplings for petrol, oil and
lubricants. -- Quick-acting couplings
GSE/42 obsolescent (2008) Withdrawal
BS 2464-4:1980 Hose couplings for petrol, oil and lubricants. --
Specification for 100 mm quick-acting couplings:
European type
GSE/42 obsolescent (2008) Withdrawal
BS 2474:1993 Recommendations for names for chemicals used in
industry
I/- current Withdrawal
BS 2483:1977 Specification for overbed tables CH/101 confirmed (2007) Reconfirmation
BS 2486:1997 Recommendations for treatment of water for steam
boilers and water heaters
CII/62 confirmed (2008) Reconfirmation
BS 2520:1983 Specification for barometer conventions and tables,
their application and use
SS/7 obsolescent (2008) withdrawal
BS 2540:1991 Specification for granular desiccant silica gel I/- obsolescent (2009) Withdrawal
BS 2565:1972 Specification for drums for covered winding wires and
strips for electrical purposes
GEL/55 obsolescent (2008) Withdrawal
Updated Nov 2013 3 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 2573-2:1980 Rules for the design of cranes -- Specification for
classification, stress calculations and design of
mechanisms
MHE/3/1 replaced by BS EN
13001-
1:2004+A1:2009, BS
EN 13001-
2:2004+A3:2009, DD
CEN/TS 13001-
3.1:2004 and DD
CEN/TS 13001-3-
2:2004 until part 3-3 of
the series is published
Reconfirmation
BS 2627:1970 Specification for wrought aluminium for electrical
purposes. Wire
GEL/20/16 confirmed (2008) Reconfirmation
BS 2656:1972 Specification for zinc anodes, zinc oxide and zinc salts
for electroplating
STI/33 obsolescent (2011) withdrawal
BS 275:1927 Specification for dimensions of rivets ($9H inch to 1$9L
inch diameter)
FME/9 obsolescent (2010) Withdrawal
BS 2752:2003 Chloroprene rubber compounds. Specification PRI/54 confirmed (2008)
BS 2754:1976+A1:1977 Construction of electrical equipment for protection
against electric shock
JPEL/64 confirmed (2008) Withdrawal
BS 2767:1991 Specification for manually operated copper alloy valves
for radiators
RHE/16 confirmed (2008) Reconfirmation
BS 2782-3:Method 327A:1993Methods of testing plastics. Mechanical properties --
Determination of tensile strength and elongation at
break of polytetrafluoroethylene (PTFE) products
PRI/82 confirmed (2008) Reconfirmation
BS 2782-3:Method 332A:1976Methods of testing plastics. Mechanical properties --
Stiffness of plastics film
PRI/21 obsolescent (2008) withdrawal
BS 2782-4:Method 451B:1978Methods of testing plastics. Chemical properties --
Determination of acetone-soluble matter in phenolic
moulding materials after moulding
PRI/21 obsolescent (2008) withdrawal
BS 2782-4:Method 452C:1979Methods of testing plastics. Chemical properties --
Determination of butyl rubber content of low density
polyethylene compounds
PRI/21 obsolescent (2008) withdrawal
BS 2782-5:Methods 530A and 530B:1976Methods of testing plastics. Optical and colour
properties, weathering -- Determination of yellowness
index. Determination of the colour of near-white or near-
colourless materials
PRI/21 obsolescent (2008) withdrawal
BS 2808:1969 Specification for artists' water-colour brushes for local
authorities
CW/11 confirmed (2008) Reconfirmation
BS 2846-1:1991 Guide to statistical interpretation of data -- Routine
analysis of quantitative data
SS/2 confirmed (2008) Reconfirmation
BS 2892:1974 Specification for non-returnable wooden trays for
tomatoes
PKW/0/-/11 confirmed (2008) withdrawal
BS 2897:1970 Specification for wrought aluminium for electrical
purposes. Strip with drawn or rolled edges
GEL/20/16 confirmed (2008) Reconfirmation
BS 2909:1957 Specification for cabinets for the electrical euthanasia of
dogs
CPL/61/8 confirmed (2008) Reconfirmation
BS 2930:1970 Specification for surgical spring trusses CH/168 obsolescent (2009) Withdrawal
BS 2975-2:2008 Sampling and analysis of glass-making sands --
Methods for chemical analysis
LBI/1/2 current Confirmation
BS 2992:1970 Specification for painters' and decorators' brushes for
local authorities and public institutions (excluding quality
of fillings)
CW/11 confirmed (2008) Reconfirmation
BS 2F 127:1991 Specification for nylon fabrics suitable for coating with
natural or synthetic elastomers for aerospace purposes
ACE/65 confirmed (2008) Reconfirmation
BS 2F 132:2002 Braided nylon cord with specified dimensional stability
for aerospace purposes
ACE/65 confirmed (2008) Reconfirmation
BS 2F 134:2002 Continuous filament polyester sewing thread suitable for
aerospace purposes
ACE/65 confirmed (2008) Reconfirmation
Updated Nov 2013 4 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 2F 142:1999 Hydrolysis resistant, thermoplastic polyether
polyurethane elastomer coated nylon fabric for
aerospace purposes
ACE/65 confirmed (2008) Reconfirmation
BS 2G 100-2:1962 Specification for general requirements for electrical
equipment and indicating instruments for aircraft --
Environmental and operating conditions
ACE/6 partially replaced by a
new revision (3G 100)
in several Parts,
Sections and
Subsections
Withdrawal
BS 2M 54:1991 Specification for temperature control in the heat
treatment of metals
ACE/61 obsolescent (2009) Withdrawal
BS 2S 510:1970 Specification for carbon steel sheet and strip (430/540
MPa) (suitable for welding)
ACE/61/-/15 obsolescent (2010) Reconfirmation
BS 2S 511:1970 Specification for deep drawing carbon steel sheet and
strip (280/400 MPa) (suitable for welding)
ACE/61/-/15 obsolescent (2010) Withdrawal
BS 2S 514:1969 Specification for carbon-manganese steel sheet and
strip (for use in the hardened and tempered condition:
770/1000 MPa) (suitable for welding)
ACE/61/-/15 obsolescent (2010) Reconfirmation
BS 2SP 90:2008 Specification for corrosion-resisting steel split cotter pins
for aircraft. Inch series
ACE/12 current Confirmation
BS 2X 35:2003 Selectively removable intermediate coating for
aerospace purposes
ACE/65/-/3 confirmed (2008)
BS 3031:1996 Specification for sulfuric acid used in lead-acid batteries I/- obsolescent (2009) Withdrawal
BS 3043:1973 Specification for storage envelopes for processed X-ray
films for medical radiography
I/- current Withdrawal
BS 3047:1988 Specification for sizes of posters I/- current Withdrawal
BS 3072:1989 Specification for nickel and nickel alloys: sheet and
plate
I/- obsolescent (2009) Withdrawal
BS 3075:1976 Specification for nickel and nickel alloys: wire I/- obsolescent (2009) Withdrawal
BS 3076:1989 Specification for nickel and nickel alloys: bar I/- obsolescent (2009) Withdrawal
BS 31:1940 Specification. Steel conduit and fittings for electrical
wiring
PEL/213 obsolescent (2011)
BS 3129:1959 Specification for latex foam rubber components for
furniture
PRI/71 obsolescent (2010) Withdrawal
BS 3157:1960 Specification for latex foam rubber components for
transport seating
PRI/71 obsolescent (2011) Withdrawal
BS 3175:1959 Specification for pentachlorophenol I/- obsolescent (2009) Withdrawal
BS 3193:2008 Specification for thermally toughened glass panels for
use in domestic appliances
CW/1 current Confirmation
BS 3224-5:1988 Lighting fittings for civil land aerodromes. --
Specification for inset lighting units
EPL/97 confirmed (2008) Reconfirmation
BS 3227:2003 Butyl rubber compounds (including halobutyl
compounds). Specification
PRI/54 confirmed (2008)
BS 3241:1960 Specification for toughened polystyrene for sheet
extrusion
PRI/82 confirmed (2008) Reconfirmation
BS 3271:1970 Specification for surgical elastic band trusses CH/168 obsolescent (2009) Reconfirmation
BS 3282:1969 Glossary of terms relating to gas chromatography I/- current Withdrawal
BS 3288-3:1989 Insulator and conductor fittings for overhead power lines
-- Dimensions of ball and socket couplings of string
insulator units
PEL/11 obsolescent (2008) Reconfirmation
BS 3348:1961 Specification for antral trocars and cannulae CH/170 obsolescent (2011) Withdrawal
BS 3375-1:1995 Management services -- Guide to organization study. MS/1 confirmed (2008) Reconfirmation
BS 3375-2:1993 Management services -- Guide to method study MS/1 confirmed (2008) Reconfirmation
BS 3375-3:1993 Management services -- Guide to work measurement MS/1 confirmed (2008) Reconfirmation
BS 3375-4:1993 Management services -- Guide to work performance
control
MS/1 confirmed (2008) Reconfirmation
Updated Nov 2013 5 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 3375-5:1997 Management services -- Guide to determination of
exposure limits, recovery times and relaxation times in
work measurement
MS/1 confirmed (2008) Reconfirmation
BS 3399:1961 Specification for transformers for use in ships PEL/14 obsolescent (2008) withdrawal
BS 3416:1991 Specification for bitumen-based coatings for cold
application, suitable for use in contact with potable
water
STI/27 confirmed (2008) Reconfirmation
BS 3424-5:1982 Testing coated fabrics -- Methods 7A, 7B and 7C.
Methods for determination of tear strength
TCI/69 partially replaced by
BS EN ISO 4674-
1:2003
withdrawal
BS 3424-8:1983 Testing coated fabrics -- Methods 10A, 10B and 10C.
Methods for determination of low temperature
performance
TCI/69 partially replaced by
BS EN 1876-1:1998
and BS EN 1876-
2:1998
withdrawal
BS 3441:1995 Specification for tanks for the transport of milk and liquid
milk products
AW/22 obsolescent (2011) Withdrawal
BS 3454:1995 Specification for 1.9/3.3 kV, 300 A bolted flameproof
cable couplers and adaptors (including 380/660 V and
640/1100 V, 300 A adaptors) for use in coal mines
MRE/3 confirmed (2008) Reconfirmation
BS 3455:1973 Glossary of terms used in nuclear science and
technology
NCE/2 obsolescent (2010) Withdrawal
BS 3463:1975 Specification for observation and gauge glasses for
pressure vessels
PSE/18/6 confirmed (2008) Reconfirmation
BS 3482-1:1991 Methods of test for desiccants -- Sampling, and
preparation and storage of test samples
I/- obsolescent (2009) Withdrawal
BS 3482-10:1991 Methods of test for desiccants -- Determination of bulk
density (dry basis)
I/- obsolescent (2009) Withdrawal
BS 3482-11:1991 Methods of test for desiccants -- Determination of
friability and dust content
I/- obsolescent (2009) Withdrawal
BS 3482-2:1991 Methods of test for desiccants -- Determination of
moisture content
I/- obsolescent (2009) Withdrawal
BS 3482-3:1991 Methods of test for desiccants -- Determination of pH I/- obsolescent (2009) Withdrawal
BS 3482-4:1991 Methods of test for desiccants -- Determination of water-
soluble chlorides content
I/- obsolescent (2009) Withdrawal
BS 3482-5:1991 Methods of test for desiccants -- Determination of water-
soluble sulphates content
I/- obsolescent (2009) Withdrawal
BS 3482-6:1991 Methods of test for desiccants -- Determination of
adsorptive capacity
I/- obsolescent (2009) Withdrawal
BS 3482-7:1991 Methods of test for desiccants -- Determination of
particle size
I/- obsolescent (2009) Withdrawal
BS 3482-8:1991 Methods of test for desiccants -- Estimation of ammonia
and ammonium compounds content
I/- obsolescent (2009) Withdrawal
BS 3482-9:1991 Methods of test for desiccants -- Determination of cobalt
chloride content
I/- obsolescent (2009) Withdrawal
BS 3483-0:1990 Methods for testing pigments for paints -- General
introduction
STI/1 confirmed (2008) Reconfirmation
BS 3484-1:1991 Record inks. -- Specification for blue-black inks I/- current Confirmation
BS 3484-2:1994 Record inks. -- Specification for permanent inks I/- current Confirmation
BS 3504:1962 Specification for magnesium-activated nickel for
cathodes of electronic tubes and valves
EPL/39 obsolescent (2011) Withdrawal
BS 3505:1986 Specification for unplasticized polyvinyl chloride (PVC-
U) pressure pipes for cold potable water
PRI/88 replaced by BS EN
1452-1:1999, BS EN
1452-2:1999, BS EN
1452-3:1999, BS EN
1452-4:1999 and BS
EN 1452-5:1999
Reconfirmation
BS 3522:1962 Specification for hypodermic surgical mounted needles
(Luer fitting)
CH/84 obsolescent (2008) Withdrawal
BS 3523:1991 Specification for granular desiccant silica gel
impregnated with cobalt chloride
I/- obsolescent (2009) Withdrawal
Updated Nov 2013 6 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 3575:1963 Specification for rivets for the attachment of friction
linings
FME/9 obsolescent (2010) Withdrawal
BS 3598:1998 Fissile materials. Criticality safety in handling and
processing. Recommendations
NCE/9 confirmed (2008) Reconfirmation
BS 3630-16:1976 Methods for the sampling and analysis of zinc and zinc
alloys -- Nickel in zinc alloys (photometric method)
NFE/8 confirmed (2008) Reconfirmation
BS 3664:1963 Specification for film badges for personnel radiation
monitoring
NCE/2 obsolescent (2010) Withdrawal
BS 3668:1963 Specification for red and green filters used in ophthalmic
dichromatic and dissociation tests
CH/172 confirmed (2008) Reconfirmation
BS 3673-1:1968 Specification for spring retaining rings -- Carbon steel
circlips
FME/9 replaced by BS 3673-
4:1977
Withdrawal
BS 3698:1964 Specification for calcium plumbate priming paints STI/27 confirmed (2008) Reconfirmation
BS 3710:1964 Specification for brake hose couplings for locomotives
and rolling stock
GSE/42 obsolescent (2008) Withdrawal
BS 3727-1:1966 Methods for the analysis of nickel for use in electronic
tubes and valves -- Determination of aluminium
(photometric method)
EPL/39 obsolescent (2011) Withdrawal
BS 3727-10:1964 Methods for the analysis of nickel for use in electronic
tubes and valves -- Determination of silicon 0.020-0.25
per cent (photometric method)
EPL/39 obsolescent (2011) Withdrawal
BS 3727-11:1965 Methods for the analysis of nickel for use in electronic
tubes and valves -- Determination of silicon 0.001-0.020
per cent (photometric method)
EPL/39 obsolescent (2011) Withdrawal
BS 3727-12:1970 Methods for the analysis of nickel for use in electronic
tubes and valves -- Determination of sulphur
(combustion method)
EPL/39 obsolescent (2011) Withdrawal
BS 3727-13:1965 Methods for the analysis of nickel for use in electronic
tubes and valves -- Determination of titanium
(photometric method)
EPL/39 obsolescent (2011) Withdrawal
BS 3727-14:1964 Methods for the analysis of nickel for use in electronic
tubes and valves -- Determination of tungsten
(gravimetric method)
EPL/39 obsolescent (2011) Withdrawal
BS 3727-15:1968 Methods for the analysis of nickel for use in electronic
tubes and valves -- Determination of zinc (photometric
method)
EPL/39 obsolescent (2011) Withdrawal
BS 3727-16:1966 Methods for the analysis of nickel for use in electronic
tubes and valves -- Determination of combined and free
magnesium
EPL/39 obsolescent (2011) Withdrawal
BS 3727-2:1968 Methods for the analysis of nickel for use in electronic
tubes and valves -- Determination of boron (photometric
method)
EPL/39 obsolescent (2011) Withdrawal
BS 3727-20:1966 Methods for the analysis of nickel for use in electronic
tubes and valves -- Spectrographic method
EPL/39 obsolescent (2011) Withdrawal
BS 3727-21:1966 Methods for the analysis of nickel for use in electronic
tubes and valves -- Determination of magnesium
(atomic absorption method)
EPL/39 obsolescent (2011) Withdrawal
BS 3727-22:1966 Methods for the analysis of nickel for use in electronic
tubes and valves -- Determination of zinc (atomic
absorption method)
EPL/39 obsolescent (2008) Withdrawal
BS 3727-3:1966 Methods for the analysis of nickel for use in electronic
tubes and valves -- Determination of carbon
EPL/39 obsolescent (2011) Withdrawal
BS 3727-4:1964 Methods for the analysis of nickel for use in electronic
tubes and valves -- Determination of chromium
(photometric method)
EPL/39 obsolescent (2011) Withdrawal
BS 3727-5:1964 Methods for the analysis of nickel for use in electronic
tubes and valves -- Determination of cobalt (photometric
method)
EPL/39 obsolescent (2011) Withdrawal
Updated Nov 2013 7 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 3727-6:1964 Methods for the analysis of nickel for use in electronic
tubes and valves -- Determination of copper
(photometric method)
EPL/39 obsolescent (2011) Withdrawal
BS 3727-7:1964 Methods for the analysis of nickel for use in electronic
tubes and valves -- Determination of iron (photometric
method)
EPL/39 obsolescent (2011) Withdrawal
BS 3727-8:1964 Methods for the analysis of nickel for use in electronic
tubes and valves -- Determination of manganese
(photometric method)
EPL/39 obsolescent (2011) Withdrawal
BS 3727-9:1967 Methods for the analysis of nickel for use in electronic
tubes and valves -- Determination of magnesium
(photometric method)
EPL/39 obsolescent (2011) Withdrawal
BS 3728:1982 Specification for size designation of children's and
infants' wear
TCI/66 confirmed (2008) Reconfirmation
BS 373:1957 Methods of testing small clear specimens of timber B/518 confirmed (2008) Reconfirmation
BS 3762-0:1991 Analysis of formulated detergents -- General
introduction
CII/34 confirmed (2008) Reconfirmation
BS 3762-3.18:1986 Analysis of formulated detergents -- Method for
determination of chlorine oxidizing agents content
CII/34 confirmed (2008) Reconfirmation
BS 3762-3.5:1986 Analysis of formulated detergents -- Methods for
determination of total organic matter content
CII/34 confirmed (2008) Reconfirmation
BS 3762-3.6:1986 Analysis of formulated detergents -- Method for
determination of matter soluble in light petroleum
CII/34 confirmed (2008) Reconfirmation
BS 3762-3.7:1986 Analysis of formulated detergents -- Method for
determination of total non-ionic matter content
CII/34 confirmed (2008) Reconfirmation
BS 3762-3.8:1986 Analysis of formulated detergents -- Method for
determination of alkanolamides content
CII/34 confirmed (2008) Reconfirmation
BS 3769:1964 Specification for copper naphthenate and copper
naphthenate concentrates
I/- obsolescent (2009) Withdrawal
BS 3770:1964 Specification for zinc naphthenate and zinc naphthenate
concentrates
I/- obsolescent (2009) Withdrawal
BS 3775:1964 Specification for counting trays (planchets) for
radioactive assay
NCE/2 obsolescent (2010) Withdrawal
BS 3810-1:1964 Glossary of terms used in materials handling -- Terms
used in connection with pallets, stillages, hand and
powered trucks
MHE/7 obsolescent (2010) Withdrawal
BS 3810-2:1965 Glossary of terms used in materials handling -- Terms
used in connection with conveyors and elevators
(excluding pneumatic and hydraulic handling)
MHE/9 obsolescent (2008) Withdrawal
BS 3810-3:1967 Glossary of terms used in materials handling -- Terms
used in connection with pneumatic and hydraulic
handling
MHE/7 obsolescent (2008) Withdrawal
BS 3810-4:1968 Glossary of terms used in materials handling -- Terms
used in connection with cranes
MHE/3/1 obsolescent (2010) Withdrawal
BS 3810-5:1971 Glossary of terms used in materials handling -- Terms
used in connection with lifting tackle
MHE/7 obsolescent (2008) Withdrawal
BS 3810-6:1973 Glossary of terms used in materials handling -- Terms
used in connection with pulley blocks
MHE/7 obsolescent (2008) Withdrawal
BS 3810-7:1973 Glossary of terms used in materials handling -- Terms
used in connection with aerial ropeways and cableways
MHE/7 obsolescent (2008) Withdrawal
BS 3810-8:1975 Glossary of terms used in materials handling -- Terms
used in connection with lifts, lifting platforms and
inclined haulages
MHE/7 obsolescent (2008) Withdrawal
BS 3810-9:1975 Glossary of terms used in materials handling -- Terms
used in connection with rail transport
MHE/7 obsolescent (2008) Withdrawal
BS 3839:1978 Specification for oxygen-free high-conductivity copper
for electronic tubes and semiconductor devices
EPL/39 obsolescent (2011) Withdrawal
Updated Nov 2013 8 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 3890:1965 General recommendations for the testing, calibration
and processing of radiation monitoring films
NCE/2 obsolescent (2010) withdrawal
BS 3900-A11:1974 Methods of test for paints. Tests on liquid paints
(excluding chemical tests) -- Small scale test for
combustibility
STI/10 confirmed (2008) Reconfirmation
BS 3900-A5:1991 Methods of test for paints. -- Large-scale brushing tests
for paints and varnishes
STI/10 confirmed (2008) Reconfirmation
BS 3900-B15:1987 Methods of test for paints. -- Rapid method for
estimation of lead in liquid paints
STI/10 confirmed (2008) Reconfirmation
BS 3900-C1:1965 Methods of test for paints. Tests associated with paint
film formation -- Wet edge time
STI/10 confirmed (2008) Reconfirmation
BS 3900-E7:1974 Methods of test for paints. -- Resistance to impact
(falling ball test)
STI/10 confirmed (2008) Reconfirmation
BS 3900-E8:1974 Methods of test for paints. -- Resistance to impact
(pendulum test)
STI/10 confirmed (2008) Reconfirmation
BS 3900-F10:1985 Methods of test for paints. -- Determination of resistance
to cathodic disbonding of coatings for use in marine
environments
STI/10 confirmed (2008) Reconfirmation
BS 3900-F11:1985 Methods of test for paint. Durability tests on paint films --
Determination of resistance to cathodic disbonding of
coatings for use on land-based buried structures
STI/10 confirmed (2008) Reconfirmation
BS 3900-F2:1973 Methods of test for paint. Durability tests on paint films --
Determination of resistance to humidity (cyclic
condensation)
STI/10 confirmed (2008) Reconfirmation
BS 3900-F4:1968 Methods of test for paints -- Resistance to continuous
salt spray
STI/10 confirmed (2008) Reconfirmation
BS 3900-F5:1972 Methods of test for paints. -- Determination of light
fastness of paints for interior use exposed to artificial
light sources
STI/10 confirmed (2008) Reconfirmation
BS 3900-G6:1989 Methods of test for paints. -- Assessment of resistance
to fungal growth
STI/10 confirmed (2008) Reconfirmation
BS 3908-10:1989 Methods for the sampling and analysis of lead and lead
alloys -- Antimony in lead alloys (titrimetric method)
NFE/22 confirmed (2008) Reconfirmation
BS 3908-13:1970 Methods for the sampling and analysis of lead and lead
alloys -- Antimony in lead and lead alloys (low contents)
(photometric method)
NFE/22 confirmed (2008) Reconfirmation
BS 3908-2:1967 Methods for the sampling and analysis of lead and lead
alloys -- Arsenic in lead and lead alloys (photometric
method)
NFE/22 confirmed (2008) Reconfirmation
BS 3908-6:1971 Methods for the sampling and analysis of lead and lead
alloys -- Tellurium in lead and lead alloys (photometric
method)
NFE/22 confirmed (2008) Reconfirmation
BS 3908-9:1991 Methods for the sampling and analysis of lead and lead
alloys -- Sulphur in lead and lead alloys
NFE/22 confirmed (2008) Reconfirmation
BS 3909:1965 Specification for ingot lead for radiation shielding NFE/22 confirmed (2008) Reconfirmation
BS 3923-2:1972 Methods for ultrasonic examination of welds --
Automatic examination of fusion welded butt joints in
ferritic steels
WEE/46 obsolescent (2009) withdrawal
BS 3924:1978 Specification for pressure-sensitive adhesive tapes for
electrical insulating purposes
GEL/15 partially replaced by
Parts of BS EN 60454-
3
Withdrawal
BS 3929:1965 Specification for domestic solid fuel ignition pokers and
portable undergrate ignition burners for use with
commercial butane
RHE/28 obsolescent (2009) withdrawal
BS 3936-1:1992 Nursery stock -- Specification for trees and shrubs AW/1 confirmed (2008) Reconfirmation
BS 3936-11:1984 Nursery stock -- Specification for container-grown
culinary herbs
AW/1 confirmed (2008) Reconfirmation
Updated Nov 2013 9 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 3985:2003 Haemiglobincyanide (cyanmethaemoglobin) preparation
as a standard for spectrometric haemoglobinometry
CH/212 confirmed (2008) Reconfirmation
BS 3988:1970 Specification for wrought aluminium for electrical
purposes. Solid conductors for insulated cables
NFE/35 confirmed (2008) Reconfirmation
BS 3F 135:2002 Braided nylon cord with unspecified dimensional stability
for aerospace purposes
ACE/65 confirmed (2008) Reconfirmation
BS 3G 100-3:1979 Specification for general requirements for equipment for
use in aircraft. -- Characteristics of aircraft electrical
power supplies
ACE/6 obsolescent (2009) Withdrawal
BS 3G 100-4.1:1973 Specification for general requirements for equipment for
use in aircraft. Electrical equipment -- Construction and
general
ACE/58 obsolescent (2008) Withdrawal
BS 4024:1966 Specification for pentachlorophenyl laurate I/- obsolescent (2009) Withdrawal
BS 4088-1.3:1995 Carpet cleaning products. Methods of sampling and test
-- General methods for impregnated powder
formulations
I/- current Withdrawal
BS 4164:2002 Specification for coal-tar-based hot-applied coating
materials for protecting iron and steel, including a
suitable primer
ISE/110 confirmed (2008) Withdrawal
BS 4172-1:1999 Hand-held pressurized aerosol dispensers against
houseflies -- Specification for insecticidal performance
I/- current Confirmation
BS 4172-2:1999 Hand-held pressurized aerosol dispensers against
houseflies -- Method for determination of insecticidal
performance
I/- current Confirmation
BS 4211:2005+A1:2008 Specification for permanently fixed ladders B/208/1 current Confirmation
BS 4220-1:1974 Methods of test for seats on agricultural wheeled
tractors. -- Tests on artificial track
AGE/6 obsolescent (2010) Withdrawal
BS 4247-1:1981 Surface materials for use in radioactive areas. --
Methods of measuring and evaluating the
decontamination factor
NCE/2 obsolescent (2010) withdrawal
BS 4247-2:1982 Surface materials for use in radioactive areas. -- Guide
to the selection of materials
NCE/2 obsolescent (2010) withdrawal
BS 4255-1:1986 Rubber used in preformed gaskets for weather
exclusion from buildings -- Specification for non-cellular
gaskets
PRI/73 confirmed (2008) Reconfirmation
BS 4257:1967 Specification for the dimensions of E-cores made of
ferromagnetic oxides for use in telecommunication and
allied electronic equipment.
EPL/51 obsolescent (2008) Withdrawal
BS 4300/10:1969 Wrought aluminium and aluminium alloys for general
engineering purposes (supplementary series) -- 5454
Drawn tube
NFE/35 confirmed (2008) Reconfirmation
BS 4345:1968 Specification for slotted angles MHE/8 confirmed (2008)
BS 4346-1:1969 Joints and fittings for use with unplasticized PVC
pressure pipes -- Injection moulded unplasticized PVC
fittings for solvent welding for use with pressure pipes,
including potable water supply
PRI/88 replaced by BS EN
1452-1:1999, BS EN
1452-2:1999, BS EN
1452-3:1999, BS EN
1452-4:1999 and BS
EN 1452-5:1999
Reconfirmation
BS 4346-2:1970 Joints and fittings for use with unplasticized PVC
pressure pipes -- Mechanical joints and fittings,
principally of unplasticized PVC
PRI/88 replaced by BS EN
1452-1:1999, BS EN
1452-2:1999, BS EN
1452-3:1999, BS EN
1452-4:1999 and BS
EN 1452-5:1999
Withdrawal
BS 437:2008 Specification for cast iron drain pipes, fittings and their
joints for socketed and socketless systems
PSE/10 current Confirmation
BS 4370-1:1988 Methods of test for rigid cellular materials -- Methods 1
to 5
PRI/24 obsolescent (2011) withdrawal
Updated Nov 2013 10 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 4370-3:1988 Methods of test for rigid cellular materials -- Methods 12
and 13
PRI/24 confirmed (2008) Reconfirmation
BS 4370-4:1991 Methods of test for rigid cellular materials -- Method 14.
Determination of flexural properties
PRI/24 confirmed (2008) Reconfirmation
BS 4409-1:1991 Screw conveyors -- Specification for fixed trough type MHE/9 confirmed (2008) Reconfirmation
BS 4409-2:1991 Screw conveyors -- Specification for portable and
mobile type (augers)
MHE/9 confirmed (2008) Reconfirmation
BS 442:1950 Specification for terminals for electrical apparatus for
railway signalling purposes
GEL/9 confirmed (2008) Reconfirmation
BS 4443-3:1988 Methods of test for flexible cellular materials -- Method
8. Determination of creep. Method 9. Determination of
dynamic cushioning performance
PRI/24 partially replaced by
BS EN ISO
4651:1995+A1:2008
withdrawal
BS 4443-7:1992+A1:2008Methods of test for flexible cellular materials -- Method
17. Determination of tear strength of flexible cellular
material with an integral skin
PRI/24 confirmed (2008) Reconfirmation
BS 4505-6:1976 Digital data transmission -- Complements to the basic
mode control procedures; recovery, abort and interrupt,
multiple station selection
IST/6 obsolescent (2008) Withdrawal
BS 4505-7:1976 Digital data transmission -- Basic mode control
procedures; conversational information message transer
IST/6 obsolescent (2008) Withdrawal
BS 4515-1:2009 Specification for welding of steel pipelines on land and
offshore -- Carbon and carbon manganese steel
pipelines
WEE/21/7 current Confirmation
BS 4532:1969 Specification for snorkels and face masks SW/136 confirmed (2008) Reconfirmation
BS 4549-1:1997 Guide to quality control requirements for reinforced
plastics mouldings -- Guide to the preparation of a
scheme to control the quality of glass reinforced
polyester mouldings
PRI/42 confirmed (2008) Reconfirmation
BS 456:1961 Specification for dimensions of track circuit insulation GEL/9 obsolescent (2010) Withdrawal
BS 4569:1983 Method of test for ignitability (surface flash) of pile
fabrics and assemblies having pile on the surface
TCI/66/-/8 confirmed (2008)
BS 4578:1970 Specification for methods of test for hardness of, and for
air flow through, infants' pillows
TCI/66 confirmed (2008) Reconfirmation
BS 4592-6:2008 Industrial type flooring and stair treads -- Glass
reinforced plastics (GRP) moulded open mesh gratings
and protective barriers. Specification
B/208/1 current Confirmation
BS 460:2002+A2:2007 Cast iron rainwater goods. Specification PSE/10 confirmed (2008) Reconfirmation
BS 4603:1970 Method for determination of residue on ignition or ash of
chemical products
I/- current Confirmation
BS 4618:Introduction:1970Recommendations for the presentation of plastics
design data -- General introduction
I/- obsolescent (2009) Withdrawal
BS 4618-1.1.1:1970 Recommendations for the presentation of plastics
design data. Mechanical properties -- Creep in uniaxial
tension or compression (with particular reference to
solid plastics)
I/- obsolescent (2009) Withdrawal
BS 4618-1.1.2:1976 Recommendations for the presentation of plastics
design data. Mechanical properties -- Creep in flexure at
low strains
I/- obsolescent (2009) Withdrawal
BS 4618-1.1:1970 Recommendations for the presentation of plastics
design data. Mechanical properties -- Creep
I/- obsolescent (2009) Withdrawal
BS 4618-1.2:1972 Recommendations for the presentation of plastics
design data. Mechanical properties -- Impact behaviour
I/- obsolescent (2009) Withdrawal
BS 4618-1.3.1:1975 Recommendations for the presentation of plastics
design data. Mechanical properties -- Static fatigue
failure
I/- obsolescent (2009) Withdrawal
Updated Nov 2013 11 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 4618-1.3.3:1976 Recommendations for the presentation of plastics
design data. Mechanical properties -- Environmental
stress cracking
I/- obsolescent (2009) Withdrawal
BS 4618-1.3:1975 Recommendations for the presentation of plastics
design data. Mechanical properties -- Strength
I/- obsolescent (2009) Withdrawal
BS 4618-2.1:1970 Recommendations for the presentation of plastics
design data. Electrical properties -- Permittivity
I/- obsolescent (2009) Withdrawal
BS 4618-2.2:1970 Recommendations for the presentation of plastics
design data. Electrical properties -- Loss tangent
I/- obsolescent (2009) Withdrawal
BS 4618-2.3:1975 Recommendations for the presentation of plastics
design data. Electrical properties -- Volume resistivity
I/- obsolescent (2009) Withdrawal
BS 4618-2.4:1975 Recommendations for the presentation of plastics
design data. Electrical properties -- Surface resistivity
I/- obsolescent (2009) Withdrawal
BS 4618-3.1:1970 Recommendations for the presentation of plastics
design data. Thermal properties -- Linear thermal
expansion
I/- obsolescent (2009) Withdrawal
BS 4618-3.2:1973 Recommendations for the presentation of plastics
design data. Thermal properties -- Heat content
I/- obsolescent (2009) Withdrawal
BS 4618-3.3:1973 Recommendations for the presentation of plastics
design data. Thermal properties -- Thermal conductivity
I/- obsolescent (2009) Withdrawal
BS 4618-4.1:1972 Recommendations for the presentation of plastics
design data. Environmental and chemical effects --
Chemical resistance to liquids
PRI/21 obsolescent (2009) withdrawal
BS 4618-4.2:1972 Recommendations for the presentation of plastics
design data. Environmental and chemical effects --
Resistance to natural weathering
PRI/21 obsolescent (2009) withdrawal
BS 4618-4.4:1973 Recommendations for the presentation of plastics
design data. Environmental and chemical effects -- The
effect of marine exposure
PRI/21 obsolescent (2009) withdrawal
BS 4618-4.5:1974 Recommendations for the presentation of plastics
design data. Environmental and chemical effects -- The
effect on plastics of soil burial and biological attack
PRI/21 obsolescent (2009) withdrawal
BS 4618-5.1:1970 Recommendations for the presentation of plastics
design data. Other properties -- Density
I/- obsolescent (2009) Withdrawal
BS 4618-5.2:1970 Recommendations for the presentation of plastics
design data. Other properties -- Change in linear
dimensions with moisture absorption
I/- obsolescent (2009) Withdrawal
BS 4618-5.3:1972 Recommendations for the presentation of plastics
design data. Other properties -- Optical properties
I/- obsolescent (2009) Withdrawal
BS 4618-5.4:1972 Recommendations for the presentation of plastics
design data. Other properties -- Acoustical properties
(mechanical damping capacity)
PRI/21 obsolescent (2009) withdrawal
BS 4618-5.5:1974 Recommendations for the presentation of plastics
design data. Other properties -- Data on diffusion
I/- obsolescent (2009) Withdrawal
BS 4618-5.6:1975 Recommendations for the presentation of plastics
design data. Other properties -- Guide to sliding friction
I/- obsolescent (2009) Withdrawal
BS 4620:1970 Specification for rivets for general engineering purposes FME/9 obsolescent (2010) Withdrawal
BS 4622:1970 Specification for grey iron pipes and fittings PSE/10 obsolescent (2009) Withdrawal
BS 4623:1989 Specification for folded continuous stationery for impact
printers
I/- obsolescent (2009) Withdrawal
BS 4630:1970 Specification for tributyltin oxide (di(tributyltin) oxide) I/- obsolescent (2009) Withdrawal
BS 4642:1970 Glossary of industrial furnace terms E/- current Withdrawal
BS 4652:1995 Specification for zinc-rich priming paint (organic media) STI/27 confirmed (2008) Reconfirmation
Updated Nov 2013 12 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 4653-2:1970 Specification for paper covered copper conductors --
Rectangular conductors
GEL/55 obsolescent (2008) Withdrawal
BS 4672-1:1971 Guide to hazards in the transport and storage of
packages -- Climatic hazards
PKW/0 obsolescent (2010) Reconfirmation
BS 4672-2:1971 Guide to hazards in the transport and storage of
packages. -- Climatic hazards (maps and diagrams)
PKW/0 obsolescent (2010) Reconfirmation
BS 4680:1996 Specification for clothes lockers MHE/8 confirmed (2008)
BS 4723:2002 Stretch covers for upholstered furniture. Specification TCI/66 confirmed (2008) Reconfirmation
BS 4727-2:Group 10:1985Glossary of electrotechnical, power, telecommunication,
electronics, lighting and colour terms. Terms particular
to power engineering -- Industrial electroheating
terminology
GEL/1 confirmed (2008) Reconfirmation
BS 476-10:2009 Fire tests on building materials and structures -- Guide
to the principles, selection, role and application of fire
testing and their outputs
FSH/21 current Confirmation
BS 4781:1990 Specification for pressure-sensitive adhesive plastics
labels for permanent use
I/- current Confirmation
BS 4799-1:1972 Specification for varnish-bonded glass-lapped copper
conductors -- Round wire
GEL/55 obsolescent (2008) Withdrawal
BS 4801-2:1972 Specification for varnish-bonded glass-braided copper
conductors -- Rectangular conductors
GEL/55 obsolescent (2008) Withdrawal
BS 4842:1984 Specification for liquid organic coatings for application to
aluminium alloy extrusions, sheet and preformed
sections for external architectural purposes, and for the
finish on aluminium alloy extrusions, sheet and
preformed sections coated with liquid organic coatings
STI/27 confirmed (2008) Reconfirmation
BS 4877:1972 Recommendations for general principles of nuclear
reactor instrumentation
NCE/8 confirmed (2008) Revision in progress
BS 490-2:1975 Conveyor and elevator belting -- Rubber and plastics
belting of textile construction for use on bucket elevators
PRI/67 partially replaced by
Sections 1 to 7 of BS
490-10 and BS ISO
251:2003
withdrawal
BS 4926:1973 Specification for dichlorophen I/- obsolescent (2009) Withdrawal
BS 4927-1:1974 Specification for paper-, cotton-, silk- or rayon-covered
copper conductors -- Round wire
GEL/55 obsolescent (2008) Withdrawal
BS 4940-1:1994 Technical information on construction products and
services -- Guide for management
B/555 confirmed (2008) Reconfirmation
BS 4940-2:1994 Technical information on construction products and
services -- Guide to content and arrangement
B/555 confirmed (2008) Reconfirmation
BS 4940-3:1994 Technical information on construction products and
services -- Guide to presentation
B/555 confirmed (2008) Reconfirmation
BS 4968-70:1973 Specifications for di-isobutyl phthalate, di-isooctyl
phthalate, di-isooctyl sebacate
I/- obsolescent (2009) Withdrawal
BS 4971:2002 Repair and allied processes for the conservation of
documents. Recommendations
IDT/2/9 confirmed (2008)
BS 4974:1975 Specification for water for lead-acid batteries I/- current Confirmation
BS 499-1:2009 Welding terms and symbols -- Glossary for welding,
brazing and thermal cutting
WEE/1 current Confirmation
BS 4994:1987 Specification for design and construction of vessels and
tanks in reinforced plastics
PRI/5 replaced by BS EN
13923:2005 and BS
EN 13121-
3:2008+A1:2010
Withdrawal
BS 5061:1974 Specification for cylindrical forage tower silos and
recommendations for their use
B/549 obsolescent (2009) Withdrawal
BS 5073:1982 Guide to stowage of goods in freight containers TW/1 confirmed (2008)
BS 5080-1:1993 Structural fixings in concrete and masonry -- Method of
test for tensile loading
B/514 confirmed (2008) Reconfirmation
Updated Nov 2013 13 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 5080-2:1986 Structural fixings in concrete and masonry -- Method for
determination of resistance to loading in shear
B/514 confirmed (2008) Reconfirmation
BS 5097-1:1974 Specification for loose leaf binders -- Ring binders with
metal mechanisms
I/- current Withdrawal
BS 5114:1975 Specification for performance requirements for joints
and compression fittings for use with polyethylene pipes
PRI/88 obsolescent (2009) Withdrawal
BS 5117-0:1992 Testing corrosion inhibiting, engine coolant concentrate
('antifreeze') -- General introduction
I/- obsolescent (2009) Withdrawal
BS 5117-1.1:1985 Testing corrosion inhibiting, engine coolant concentrate
('antifreeze'). Methods of test for determination of
physical and chemical properties -- Ancillary procedures
I/- current Withdrawal
BS 5117-1.2:1985 Testing corrosion inhibiting, engine coolant concentrate
('antifreeze'). Methods of test for determination of
physical and chemical properties -- Determination of
boiling point
I/- current Confirmation
BS 5117-1.3:1985 Testing corrosion inhibiting, engine coolant concentrate
('antifreeze'). Methods of test for determination of
physical and chemical properties. -- Determination of
freezing point
I/- current Confirmation
BS 5117-1.4:1985 Testing corrosion inhibiting, engine coolant concentrate
('antifreeze'). Methods of test for determination of
physical and chemical properties. -- Determination of
foaming characteristics
I/- current Withdrawal
BS 5117-1.5:1992 Testing corrosion inhibiting, engine coolant concentrate
('antifreeze'). Methods of test for determination of
physical and chemical properties -- Coolant hard water
stability test
I/- obsolescent (2009) Withdrawal
BS 5117-2.1:1985 Testing corrosion inhibiting, engine coolant concentrate
('antifreeze'). Methods of test for corrosion inhibition
performance. -- General procedures
I/- current Confirmation
BS 5117-2.2:1985 Testing corrosion inhibiting, engine coolant concentrate
('antifreeze'). Methods of test for corrosion inhibition
performance -- Glassware tests
I/- current Withdrawal
BS 5117-2.4:1985 Testing corrosion inhibiting, engine coolant concentrate
('antifreeze'). Methods of test for corrosion inhibition
performance. -- Static engine test
I/- current Withdrawal
BS 5117-2.5:1985 Testing corrosion inhibiting, engine coolant concentrate
('antifreeze'). Methods of test for corrosion inhibition
performance. -- Field test
I/- current Withdrawal
BS 5117-2.6:1992 Testing corrosion inhibiting, engine coolant concentrate
('antifreeze'). Methods of test for corrosion inhibition
performance -- Test for corrosion of cast aluminium
alloys under heat-transfer conditions
I/- current Confirmation
BS 5176:2003 Classification system for vulcanized rubbers.
Specification
PRI/54 confirmed (2008) Reconfirmation
BS 5237:1985 Specification for lifting twistlocks TW/1 confirmed (2008) Reconfirmation
BS 5254:1976 Specification for polypropylene waste pipe and fittings
(external diameter 34.6 mm, 41.0 mm and 54.1 mm)
PRI/88 replaced by BS EN
1451-1:2000
Reconfirmation
BS 5276-4:1977 Pressure vessel details (dimensions) -- Standardized
pressure vessels
PVE/1 obsolescent (2010) withdrawal
BS 5309-1:1976 Methods for sampling chemical products -- Introduction
and general principles
I/- obsolescent (2009) Withdrawal
Updated Nov 2013 14 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 5309-2:1976 Methods for sampling chemical products. -- Sampling of
gases
I/- obsolescent (2009) Withdrawal
BS 5309-3:1976 Methods for sampling chemical products. -- Sampling of
liquids
I/- obsolescent (2009) Withdrawal
BS 5309-4:1976 Methods for sampling chemical products. -- Sampling of
solids
I/- obsolescent (2009) Withdrawal
BS 5332:1982 Specification for data elements for the generation and
exchange of serials records
IDT/2/7 obsolescent (2008) Withdrawal
BS 5336:1976 Specification. Cores made of ferromagnetic oxides for
use in high flux density transformers
EPL/51 obsolescent (2011) Withdrawal
BS 5338:1976 Code of practice for zinc alloy pressure die casting for
engineering
NFE/8 confirmed (2008) Reconfirmation
BS 5410-1:1997 Code of practice for oil firing -- Installations up to 45 kW
output capacity for space heating and hot water supply
purposes
RHE/13 confirmed (2008) Reconfirmation
BS 5410-3:1976 Code of practice for oil firing -- Installations for furnaces,
kilns, ovens and other industrial purposes
RHE/13 confirmed (2008) Reconfirmation
BS 5412:1996 Specification for low-resistance single taps and
combination tap assemblies (nominal size $9H and $9L)
suitable for operation at PN 10 max. and a minimum
flow pressure of 0.01 MPa (0.1 bar)
B/504 replaced by BS EN
200:2008 and has
been declared
obsolescent
Withdrawal
BS 5427-1:1996 Code of practice for the use of profiled sheet for roof
and wall cladding on buildings -- Design
B/542/6 confirmed (2007) Revision in progress
BS 5431:1976 Specification for bending springs for use with copper
tubes for water, gas and sanitation
NFE/34 confirmed (2008) Reconfirmation
BS 5438:1976 Methods of test for flammability of vertically oriented
textile fabrics and fabric assemblies subjected to a
small igniting flame
TCI/66/-/8 confirmed (2008) Reconfirmation
BS 5438:1989 Methods of test for flammability of textile fabrics when
subjected to a small igniting flame applied to the face or
bottom edge of vertically oriented specimens
TCI/66/-/8 confirmed (2008) Withdrawal
BS 5444:2008 Physical attributes of documents for microfilming or
scanning. Code of practice
IDT/1/2 current Confirmation
BS 5446-2:2003 Fire detection and fire alarm devices for dwellings --
Specification for heat alarms
FSH/12/2 confirmed (2008) Reconfirmation
BS 545:1982 Specification for bevel gears (machine cut) MCE/5 current Withdrawal
BS 5477:1977 Method for visual assessment, by grid assay, of dirt in
paper for character recognition
IST/12 obsolescent (2008) Reconfirmation
BS 5489-2:2003+A1:2008Code of practice for the design of road lighting --
Lighting of tunnels
EL/1/2 current
BS 5498:1977 Specification for the safety of hand operated paper
cutting machines
I/- current Confirmation
BS 5537:1991 Guide to forms design sheet and layout chart I/- current Withdrawal
BS 5550-7.4.2:2000 Cinematography. Production and presentation. Sound --
Subsection 7.4.2: Sound - Specification for maximum
recording levels for commercials and trailers.
CPW/36 confirmed (2008) Reconfirmation
BS 5561:1979 Specification for spools for copper wire NFE/34 confirmed (2008) Reconfirmation
BS 5576:1998 Specification for fire safety features of camping tents,
awnings, trailer tents and caravan awnings
SW/136/11 obsolescent (2011) withdrawal
BS 5651:1978 Cleansing and wetting procedures for use in the
assessment of the effect of cleansing and wetting on the
flammability of textile fabrics and fabric assemblies
TCI/66/-/8 confirmed (2008) Reconfirmation
BS 5651:1989 Method for cleansing and wetting procedures for use in
the assessment of the effect of cleansing and wetting on
the flammability of textile fabrics and fabric assemblies
TCI/66/-/8 confirmed (2008) Withdrawal
Updated Nov 2013 15 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 5655-10:1986 Lifts and service lifts -- Specification for the testing and
inspection of electric and hydraulic lifts
MHE/4 partially replaced by
BS 5655-10.1.1:1995
and BS 5655-
10.2.1:1995
Withdrawal
BS 5666-2:1980 Methods of analysis of wood preservatives and treated
timber -- Qualitative analysis
B/515 confirmed (2008) Reconfirmation
BS 5666-3:1991 Methods of analysis of wood preservatives and treated
timber -- Quantitative analysis of preservatives and
treated timber containing copper/chromium/arsenic
formulations
B/515 confirmed (2008) Reconfirmation
BS 5666-4:1979 Methods of analysis of wood preservatives and treated
timber -- Quantitative analysis of preservatives and
treated timber containing copper naphthenate
B/515 confirmed (2008) Reconfirmation
BS 5666-5:1986 Methods of analysis of wood preservatives and treated
timber -- Determination of zinc naphthenate in
preservative solutions and treated timber
B/515 confirmed (2008) Reconfirmation
BS 5666-6:1983 Methods of analysis of wood preservatives and treated
timber -- Quantitative analysis of preservative solutions
and treated timber containing pentachlorophenol,
pentachlorophenyl laurate, $Gg-hexachlorocyclohexane
and dieldrin
B/515 confirmed (2008) Reconfirmation
BS 5666-7:1991 Methods of analysis of wood preservatives and treated
timber -- Quantitative analysis of preservatives
containing bis(tri-$in-butyltin)oxide : determination of
total tin
B/515 confirmed (2008) Reconfirmation
BS 5685-5:1987 Electricity meters -- Specification for input and output
switching or logic arrangements for multi-rate registers
for electricity meters
PEL/13 obsolescent (2010) withdrawal
BS 5685-8:1991 Electricity meters -- Specification for impulse operated
multiple registers for use with induction electricity
meters
PEL/13 obsolescent (2010) withdrawal
BS 5701-1:2003 Guide to quality control and performance improvement
using qualitative (attribute) data -- Uses and value of
attribute charts in business, industry, commerce and
public service
SS/4 confirmed (2008) Reconfirmation
BS 5701-2:2003 Guide to quality control and performance improvement
using qualitative (attribute) data -- Fundamentals of
standard attribute charting for monitoring, control and
improvement
SS/4 confirmed (2008) Reconfirmation
BS 5701-3:2003 Guide to quality control and performance improvement
using qualitative (attribute) data -- Technical aspects of
attribute charting. Special situation handling
SS/4 confirmed (2008) Reconfirmation
BS 5701-4:2003 Guide to quality control and performance improvement
using qualitative (attribute) data -- Attribute inspection
performance control and improvement
SS/4 confirmed (2008) Reconfirmation
BS 5702-1:2001 Guide to statistical process control (SPC) charts for
variables -- Charts for mean, median, range and
standard deviation
SS/4 confirmed (2008) Reconfirmation
BS 5702-2:2008 Guide to statistical process control (SPC) charts for
variables -- Charts for individual values
SS/4 current Reconfirmation
BS 5702-3:2008 Guide to statistical process control (SPC) charts for
variables -- Charting techniques for short runs and small
mixed batches
SS/4 current Confirmation
BS 5722:1984 Specification for flammability performance of fabrics and
fabric assemblies used in sleepwear and dressing
gowns
TCI/66/-/8 confirmed (2008) Reconfirmation
BS 5722:1991 Specification for flammability performance of fabrics and
fabric combinations used in nightwear garments
TCI/66/-/8 confirmed (2008) Withdrawal
Updated Nov 2013 16 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 573; 574 [...]:1973 Specifications for plasticizer esters I/- current Withdrawal
BS 5803-2:1985 Thermal insulation for use in pitched roof spaces in
dwellings -- Specification for man-made mineral fibre
thermal insulation in pelleted or granular form for
application by blowing
B/540 confirmed (2008) Reconfirmation
BS 5803-3:1985 Thermal insulation for use in pitched roof spaces in
dwellings -- Specification for cellulose fibre thermal
insulation for application by blowing
B/540 confirmed (2008) Reconfirmation
BS 5803-4:1985 Thermal insulation for use in pitched roof spaces in
dwellings -- Methods for determining flammability and
resistance to smouldering
B/540 confirmed (2008) Reconfirmation
BS 581:1950 Specification for electrically-driven point-operating
machines for railways
GEL/9 obsolescent (2009) Withdrawal
BS 5827:1979 Specification for mobile, manually operated patient-
lifting devices
CH/173/-/6 obsolescent (2010) Withdrawal
BS 5839-3:1988 Fire detection and alarm systems for buildings --
Specification for automatic release mechanisms for
certain fire protection equipment
FSH/12 confirmed (2008) Reconfirmation
BS 585-1:1989 Wood stairs -- Specification for stairs with closed risers
for domestic use, including straight and winder flights
and quarter or half landings
B/208 obsolescent (2009) Reconfirmation
BS 585-2:1985 Wood stairs -- Specification for performance
requirements for domestic stairs constructed of wood-
based materials
B/208 obsolescent (2009) Reconfirmation
BS 5867-2:2008 Fabrics for curtains, drapes and window blinds --
Flammabililty requirements. Specification
TCI/66/-/8 current
BS 5871-1:2005 Specification for the installation and maintenance of gas
fires, convector heaters, fire/back boilers and decorative
fuel effect gas appliances -- Gas fires, convector
heaters, fire/back boilers and heating stoves (2nd and
3rd family gases)
GSE/30 current Confirmation
BS 5871-2:2005 Specification for the installation and maintenance of gas
fires, convector heaters, fire/back boilers and decorative
fuel effect gas appliances -- Inset live fuel effect gas
fires of heat input not exceeding 15 kW, and fire/back
boilers (2nd and 3rd family gases)
GSE/30/-/4 current Confirmation
BS 5871-3:2005 Specification for the installation and maintenance of gas
fires, convector heaters, fire/back boilers and decorative
fuel effect gas appliances -- Decorative fuel effect gas
appliances of heat input not exceeding 20 kW (2nd and
3rd family gases)
GSE/30 current Confirmation
BS 5871-4:2007 Specification for the installation and maintenance of gas
fires, convector heaters, fire/back boilers and decorative
fuel effect gas appliances -- Independent gas-fired
flueless fires, convector heaters and heating stoves of
nominal heat input not exceeding 6 kW (2nd and 3rd
family gases)
GSE/30 current Confirmation
BS 5925:1991 Code of practice for ventilation principles and designing
for natural ventilation
B/540 confirmed (2007) Reconfirmation
BS 5943:1980 Methods for measurement and recording for
orthopaedic footwear
CH/168 obsolescent (2009) Withdrawal
BS 5999:1980 Specification for serials holdings statements for libraries
and documentation centres
IDT/2/7 obsolescent (2008) Withdrawal
BS 5F 120:2002 Continuous filament nylon sewing threads for aerospace
purposes
ACE/65 confirmed (2008) Reconfirmation
BS 5F 54:2002 Heavy duty linen (flax) sewing thread for aerospace
purposes
ACE/65 confirmed (2008) Reconfirmation
BS 5F 58:2002 Cotton thread for aerospace purposes ACE/65 confirmed (2008) Reconfirmation
BS 5X 17:1998 Specification for oleoresinous varnish for aerospace
purposes
ACE/65/-/3 obsolescent (2010)
Updated Nov 2013 17 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 6014:2003 Ethylene propylene rubber compounds. Specification PRI/54 confirmed (2008)
BS 6031:1981 Code of practice for earthworks B/526 replaced by BS
6031:2009 and has
been declared
obsolescent
Withdrawal
BS 6043-4.0:1991 Methods of sampling and test for carbonaceous
materials used in aluminium manufacture. Cold
ramming pastes -- General introduction
CII/24 confirmed (2008) Reconfirmation
BS 6043-4.10:1991 Methods of sampling and test for carbonaceous
materials used in aluminium manufacture. Cold
ramming pastes -- Determination of the apparent
porosity of baked rammed paste
CII/24 confirmed (2008) Reconfirmation
BS 6043-4.11:1991 Methods of sampling and test for carbonaceous
materials used in aluminium manufacture. Cold
ramming pastes -- Determination of the thermal
expansion of baked rammed paste
CII/24 confirmed (2008) Reconfirmation
BS 6043-4.12:1992 Methods of sampling and test for carbonaceous
materials used in aluminium manufacture. Cold
ramming pastes -- Determination of the thermal
conductivity of baked rammed paste
CII/24 confirmed (2008) Reconfirmation
BS 6043-4.13:1991 Methods of sampling and test for carbonaceous
materials used in aluminium manufacture. Cold
ramming pastes -- Determination of ash of baked
rammed paste
CII/24 confirmed (2008) Reconfirmation
BS 6043-4.3:1991 Methods of sampling and test for carbonaceous
materials used in aluminium manufacture. Cold
ramming pastes -- Determination of aggregate size
distribution after extraction by dichloromethane
CII/24 confirmed (2008) Reconfirmation
BS 6043-4.5:1991 Methods of sampling and test for carbonaceous
materials used in aluminium manufacture. Cold
ramming pastes -- Determination of water content of
unbaked pastes
CII/24 confirmed (2008) Reconfirmation
BS 6043-4.6:1991 Methods of sampling and test for carbonaceous
materials used in aluminium manufacture. Cold
ramming pastes -- Determination of maximum rammed
apparent density of unbaked paste
CII/24 confirmed (2008) Reconfirmation
BS 6043-4.7:1991 Methods of sampling and test for carbonaceous
materials used in aluminium manufacture. Cold
ramming pastes -- Preparation of baked rammed test
pieces and determination of baked apparent density,
change in volume and loss in mass
CII/24 confirmed (2008) Reconfirmation
BS 6043-4.8:1991 Methods of sampling and test for carbonaceous
materials used in aluminium manufacture. Cold
ramming pastes -- Determination of electrical resistivity
of baked rammed paste
CII/24 confirmed (2008) Reconfirmation
BS 6043-4.9:1991 Methods of sampling and test for carbonaceous
materials used in aluminium manufacture. Cold
ramming pastes -- Determination of the cold crushing
strength of baked rammed paste
CII/24 confirmed (2008) Reconfirmation
BS 6073-2:2008 Precast concrete masonry units -- Guide for specifying
precast concrete masonry units
B/519/1 current Reconfirmation
BS 6079-2:2000 Project management -- Vocabulary MS/2 confirmed (2006) Reconfirmation
BS 6088:1981 Specification for solid glass beads for use with road
marking compounds and for other industrial uses
B/510 partially replaced by
BS EN 1423:1998
Withdrawal
BS 6100-12:2008 Building and civil engineering. Vocabulary -- Plant,
equipment and persons
CB/101 current Confirmation
BS 6100-4:2008 Building and civil engineering. Vocabulary -- Transport CB/101 current Confirmation
Updated Nov 2013 18 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 6100-5:2009 Building and civil engineering. Vocabulary -- Civil
engineering. Water engineering, environmental
engineering and pipe lines
CB/101 current Confirmation
BS 6100-6:2008 Building and civil engineering. Vocabulary --
Construction parts
CB/101 current Confirmation
BS 6100-7:2008 Building and civil engineering. Vocabulary -- Services CB/101 current Confirmation
BS 6102-1:1981 Cycles -- Specification for safety requirements for
bicycles
GME/25 replaced by BS 6102-
1:1992 as it is cited in
legislation
Withdrawal
BS 6102-1:1992 Cycles -- Specification for safety requirements for
bicycles
GME/25 partially replaced by
BS EN 14764, BS EN
14766:2005 and BS
EN 14781:2005
Withdrawal
BS 6118:1981 Specification for multi-trip glass bottles for beer and
cider
PKW/0/-/7 confirmed (2008) Reconfirmation
BS 6119-1:1981 Glass bottles for carbonated soft drinks -- Specification
for 750 ml and 1 litre multi-trip bottles
PKW/0/-/7 confirmed (2008) Reconfirmation
BS 6161-11:1985 Methods of test for anodic oxidation coatings on
aluminium and its alloys. -- Measurement of total
reflectance using a photoelectric reflectometer
STI/32 confirmed (2008) Reconfirmation
BS 6161-14:1987 Methods of test for anodic oxidation coatings on
aluminium and its alloys. -- Determination of infra-red
reflectance
STI/32 confirmed (2008) Reconfirmation
BS 6177:1982 Guide to selection and use of elastomeric bearings for
vibration isolation of buildings
B/522 obsolescent (2009) Withdrawal
BS 6182-3:1982 Intrinsically safe power supplies for use in coal mines. --
Specification for rechargeable battery units
MRE/3 confirmed (2008) Reconfirmation
BS 6200-1:1991 Sampling and analysis of iron, steel and other ferrous
metals -- Introduction and contents
ISE/102 confirmed (2008) Reconfirmation
BS 6200-2.1:1993 Sampling and analysis of iron, steel and other ferrous
metals. Sampling and sample preparation -- Methods
for iron and steel
ISE/102 confirmed (2008)
BS 6200-2.2:1993 Sampling and analysis of iron, steel and other ferrous
metals. Sampling and sample preparation -- Methods
for ferroalloys and other alloying additives
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.0:2002 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis -- Reference methods of
analysis. Summary of methods
ISE/102 confirmed (2008)
BS 6200-3.1.1:1991 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of
aluminium -- Steel, cast iron, low carbon ferro-chromium
and chromium metal: volumetric method
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.1.2:1991 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of
aluminium -- Steel and cast iron: spectrophotometric
method
ISE/102 current Confirmation
BS 6200-3.1.6:1991 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of
aluminium -- Permanent magnet alloys: volumetric
method
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.10.5:1992 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of
chromium -- Ferrochromium: volumetric method
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.11.1:1991 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of cobalt --
Steel and cast iron: spectrophotometric method
ISE/102 confirmed (2008) Reconfirmation
Updated Nov 2013 19 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 6200-3.11.2:1991 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of cobalt --
Steel, irons and steelmaking materials:
spectrophotometric method for trace amounts
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.12.1:1986 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of copper --
Steel and cast iron: volumetric method
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.12.4:1986 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of copper --
Cast iron: volumetric method
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.12.5:1986 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of copper --
Permanent magnet alloys: volumetric method
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.16.1:1986 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of lead --
Carbon steels and low alloy steels: gravimetric method
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.16.2:1986 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of lead --
Steel: spectrophotometric method
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.16.3:1991 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of lead --
Steel: spectrophotometric method for trace amounts
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.17.1:1992 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of
magnesium -- Cast iron: volumetric method
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.18.4:1991 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of
manganese -- Steel and cast iron: volumetric method
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.19.2:1992 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of
molybdenum -- Ferromolybdenum: gravimetric method
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.19.3:1992 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of
molybdenum -- Molybdenum oxide and high grade
molybdenite ores: gravimetric method
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.22.1:1992 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of nitrogen --
Steel: volumetric method
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.24.2:1992 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of
phosphorus -- Ferrochromium, ferromanganese and
ferromolybdenum: spectrophotometric method
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.26.2:1991 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of silicon --
Acid-resisting high silicon iron: gravimetric method
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.29.1:1986 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of tantalum -
- Steel: spectrophotometric method
ISE/102 confirmed (2008) Reconfirmation
Updated Nov 2013 20 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 6200-3.31.1:1992 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of tin --
Steel and cast iron: volumetric method
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.31.2:1992 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of tin --
Ferrotungsten and tungsten metal: volumetric method
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.33.1:1992 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of tungsten -
- Steel: gravimetric method
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.33.2:1992 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of tungsten -
- Steel: spectrophotometric method
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.37.1:1986 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of zirconium
-- Steel: gravimetric method
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.5.2:1991 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Sampling and analysis of
iron, steel and other ferrous metals. Methods of
analysis. Determination of boron -- Ferroboron:
volumetric method
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.8.2:1991 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of carbon --
Steel and cast iron: non-aqueous titrimetric method after
combustion
ISE/102 confirmed (2008) Reconfirmation
BS 6200-3.8.5:1991 Sampling and analysis of iron, steel and other ferrous
metals. Methods of analysis. Determination of carbon --
Cast iron and pig iron: gravimetric method for the
determination of non-combined carbon
ISE/102 confirmed (2008) Reconfirmation
BS 6200-4:1989 Sampling and analysis of iron, steel and other ferrous
metals -- Recommendations for the order of listing
elements in the chemical analysis of steel
ISE/102 confirmed (2008) Reconfirmation
BS 6200-5:1997 Sampling and analysis of iron, steel and other ferrous
metals -- Guidelines on statistical procedures
ISE/102 confirmed (2008) Reconfirmation
BS 6200-6.1:1990 Sampling and analysis of iron, steel and other ferrous
metals. Guidelines on atomic absorption spectrometric
techniques -- Recommendations for the drafting of
standard methods for the chemical analysis of iron and
steel by flame atomic absorption spectrometry
ISE/102 confirmed (2008) Reconfirmation
BS 6200-6.2:1990 Sampling and analysis of iron, steel and other ferrous
metals. Guidelines on atomic absorption spectrometric
techniques -- Recommendations for the application of
flame atomic absorption spectrometry in standard
methods for the chemical analysis of iron and steel
ISE/102 confirmed (2008) Reconfirmation
BS 6203:2003 Guide to fire characteristics and fire performance of
expanded polystyrene materials (EPS and XPS) used in
building applications
PRI/26 confirmed (2008) Reconfirmation
BS 6270-3:1991 Code of practice for cleaning and surface repair of
buildings -- Metals (cleaning only)
B/560 confirmed (2008) Reconfirmation
BS 6297:2007+A1:2008 Code of practice for the design and installation of
drainage fields for use in wastewater treatment
B/505 current Confirmation
Updated Nov 2013 21 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 6305:1982 Specification for general requirements for apparatus for
connection to the British Telecommunications public
switched telephone network
TCT/2 replaced by BS
6305:1992 as it is cited
in legislation
withdrawal
BS 6305:1992 Specification for general requirements for apparatus for
connection to public switched telephone networks run
by certain public telecommunication operators
TCT/2 obsolescent (2008) withdrawal
BS 6312:1982 Specification for plugs for use with British
Telecommunications line jack units
TCT/2 replaced by BS
6312:1985, pending
changes in legislation,
and has been declared
obsolescent
withdrawal
BS 6312:1985 Specification for plugs for use with British
Telecommunications line jack units
TCT/2 replaced by BS 6312-
1:1994 as it is cited in
legislation, and has
been declared
obsolescent
withdrawal
BS 6313:2003 Micrographics. 35 mm microfilming of serials.
Specification
IDT/1/2 confirmed (2008) Reconfirmation
BS 6317:1982 Specification for simple telephones for connection to
public switched telephone networks run by certain public
telecommunication operators
TCT/2 replaced by BS
6317:1992 pending
changes in legislation,
and has been declared
obsolescent
withdrawal
BS 6317:1992 Specification for simple telephones for connection to
public switched telephone networks run by certain public
telecommunications operators
TCT/2 obsolescent (2011) withdrawal
BS 6320:1982 Specification for modems for connection to the British
Telecommunications public switched telephone network
TCT/2 replaced by BS
6320:1992 to allow
manufacturers time to
change to the new
requirements, and has
been declared
obsolescent
withdrawal
BS 6320:1992 Specification for modems for connection to public
switched telephone networks and speech band private
circuits run by certain public telecommunications
operators
TCT/2 obsolescent (2011) withdrawal
BS 6321:1982 Specification for authorized signature lists and their
representation on microfiche in bank operations
IST/12 confirmed (2008) Withdrawal
BS 6328-2:1985 Apparatus for connection to private circuits run by
certain public telecommunication operators --
Specification for apparatus for connection to baseband
circuits
TCT/2 obsolescent (2011) withdrawal
BS 6328-3:1983 Apparatus for connection to private circuits run by
certain public telecommunication operators --
Specification for apparatus for connection to direct
current circuits
TCT/2 obsolescent (2011) withdrawal
BS 6328-4:1985 Apparatus for connection to private circuits run by
certain public telecommunication operators --
Specification for apparatus for connection to telegraph
circuits using SCVF signalling
TCT/2 obsolescent (2011) withdrawal
BS 6328-5:1984 Apparatus for connection to private circuits run by
certain public telecommunication operators --
Specification for apparatus for connection to wideband
(FDM) circuits
TCT/2 obsolescent (2011) withdrawal
Updated Nov 2013 22 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 6341:1983 Specification for fabrics for camping tents SW/136/11 obsolescent (2011) withdrawal
BS 6365:2008 Specification for precision vernier depth gauges TDW/4 replaced by BS EN
ISO 13385-2:2011 and
has been declared
obsolescent
withdrawal
BS 6375-2:2009 Performance of windows and doors -- Classification for
operation and strength characteristics and guidance on
selection and specification
B/538/1 current
BS 6396:2008 Electrical systems in office furniture and educational
furniture. Specification
FW/0/3 current Confirmation
BS 6398:1983 Specification for bitumen damp-proof courses for
masonry
B/546 current Confirmation
BS 6403:1983 Specification for simple telex terminals using single
channel voice frequency signalling for connection to
British Telecommunications telex network
TCT/2 obsolescent (2011) withdrawal
BS 641:1951 Dimensions of small rivets for general purposes FME/9 obsolescent (2010) Withdrawal
BS 6435:1984 Specification for unfilled enclosures for the dry
termination of HV cables for transformers and reactors
PEL/14 obsolescent (2008) withdrawal
BS 6436:1984 Specification for ground mounted distribution
transformers for cable box or unit substation connection
PEL/14 obsolescent (2008) withdrawal
BS 6446:1997 Specification for manufacture of glued structural
components of timber and wood based panels
B/518 confirmed (2008) Reconfirmation
BS 6463-101:1996 Quicklime, hydrated lime and natural calcium carbonate -
- Methods for preparing samples for testing
B/516/11 confirmed (2008) Reconfirmation
BS 6468:2008 Specification for depth micrometers TDW/4 current Confirmation
BS 6469-99-1:1992 Insulating and sheathing materials of electric cables --
Non-electrical tests
GEL/20/17 confirmed (2008) Reconfirmation
BS 6472-1:2008 Guide to evaluation of human exposure to vibration in
buildings -- Vibration sources other than blasting
GME/21/6 current Confirmation
BS 6472-2:2008 Guide to evaluation of human exposure to vibration in
buildings -- Blast-induced vibration
GME/21/6 current Confirmation
BS 6522:1984 Methods for determination of percentage water
saturation of insulating oil
GEL/10 confirmed (2008) Reconfirmation
BS 6529:1984 Recommendations for examining documents,
determining their subjects and selecting indexing terms
IDT/2/2 obsolescent (2008) Withdrawal
BS 6608:1985 Specification for cattle hide leathers for upholstered
furniture
TCI/69 obsolescent (2011)
BS 6612:1985 Specification for graduated compression hosiery CH/205/1 current Confirmation
BS 6616:1986 Specification for paper and print for optical character
recognition (OCR)
IST/12 obsolescent (2008) Reconfirmation
BS 6658:1985 Specification for protective helmets for vehicle users PH/6 confirmed (2008) Reconfirmation
BS 6684:1989 Specification for safety harnesses (including detachable
walking reins) for restraining children when in
perambulators (baby carriages), pushchairs and high
chairs and when walking
CW/1/5 current Withdrawal
BS 669-1:1989 Flexible hoses, end fittings and sockets for gas burning
appliances -- Specification for strip-wound metallic
flexible hoses, covers, end fittings and sockets for
domestic appliances burning 1st and 2nd family gases
GSE/42 current Confirmation
Updated Nov 2013 23 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 6724:1997+A3:2008 Electric cables. Thermosetting insulated, armoured
cables for voltages of 600/1000 V and 1900/3300 V,
having low emission of smoke and corrosive gases
when affected by fire
GEL/20/17 current Confirmation
BS 6735:1987 Specification for reach volumes for the location of
controls on agricultural tractors and machinery
AGE/6 obsolescent (2010) Withdrawal
BS 6753:1986 Specification for shotbolts (solenoid operated) for
guarding machinery
MCE/3 confirmed (2008) Reconfirmation
BS 6762-2:1991 Services for leisure accommodation vehicles and
transportable accommodation units -- Code of practice
for the installation of solid fuel fired heating in park
homes and transportable accommodation units
B/511 confirmed (2008) Reconfirmation
BS 6767-2:1998 Transportable accommodation units --
Recommendations for design and installation of
services and fittings with guidance on transportation,
siting and aspects relating to habitation
B/511 confirmed (2008) Reconfirmation
BS 6789-2:1984 Apparatus with one or more particular functions for
connection to public switched telephone networks run
by certain public telecommunications operators --
Specification for apparatus with loudspeaking facilities
TCT/2 obsolescent (2011) withdrawal
BS 6811-0:1993 Winding wires -- General introduction and list of Parts GEL/55 obsolescent (2008) Withdrawal
BS 6811-1.1:1987 Winding wires. Basic dimensions -- Specification for
diameters of conductors for round winding wires
GEL/55 obsolescent (2008) Withdrawal
BS 6829-0:1991 Analysis of surface active agents (raw materials) --
General introduction
CII/34 confirmed (2008) Reconfirmation
BS 6833-2:1992 Apparatus using cordless attachments (excluding
cellular radio apparatus) for connection to analogue
interfaces of public switched telephone networks --
Specification for cordless telephone apparatus using
radio links
TCT/2 obsolescent (2011) withdrawal
BS 6833-3:1992 Apparatus using cordless attachments (excluding
cellular radio apparatus) for connection to analogue
interfaces of public switched telephone networks --
Specification for the simple call routeing mode of
cordless PBX operation with analogue interfaces to the
PSTN and terminating stations treated as an entirety
TCT/2 obsolescent (2011) withdrawal
BS 6833-5:1991 Apparatus using cordless attachments (excluding
cellular radio apparatus) for connection to analogue
interfaces of public switched telephone networks --
Specification for the cordless elements within PBX
apparatus with analogue interfaces to the PSTN and
terminating stations treated as an entirety
TCT/2 obsolescent (2011) withdrawal
BS 684-2.32:1979 Methods of analysis of fats and fatty oils. Other methods
-- Determination of rancidity index
AW/307 obsolescent (2009) Withdrawal
BS 6867:1987 Code of practice for maintenance of electrical
switchgear for voltages above 36 kV
PEL/17/1 confirmed (2006) Revision in progress
BS 6889:1987 Specification for generating racks for synchronous belt
drive pulleys
MCE/10 confirmed (2008) Reconfirmation
BS 6915:2001 Design and construction of fully supported lead sheet
roof and wall coverings. Code of practice
B/542/11 confirmed (2008) Reconfirmation
BS 6938:1988 Recommendations for documentation of the preparation
of certified reference materials for metallurgical analysis
of non-ferrous metals
RMI/1 obsolescent (2009) withdrawal
BS 6943:1988 Classification of shapes of electronic components for
placement on printed wiring boards
EPL/40X obsolescent (2011) Withdrawal
Updated Nov 2013 24 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 6949:1991 Specification for bitumen-based coatings for cold
application excluding use in contact with potable water
STI/27 confirmed (2008) Reconfirmation
BS 6996:2003 Mineral oil resistant acrylonitrile-butadiene rubber
compounds. Specification
PRI/54 confirmed (2008)
BS 6F 100:1998 Procedure for inspection and testing of textiles for
aerospace purposes
ACE/65 confirmed (2008) Reconfirmation
BS 6F 55:1991 Specification for 345 g/m$u2 and 415 g/m$u2 cotton
canvas fabrics suitable for aerospace purposes
ACE/65 confirmed (2008) Reconfirmation
BS 7000-1:2008 Design management systems -- Guide to managing
innovation
IMS/1 current Confirmation
BS 7000-10:2008 Design management systems -- Vocabulary of terms
used in design management
IMS/1 current Confirmation
BS 7000-2:2008 Design management systems -- Guide to managing the
design of manufactured products
TDW/4/7 current
BS 7005:1988 Specification for design and manufacture of carbon
steel unfired pressure vessels for use in vapour
compression refrigeration systems
RHE/26 confirmed (2008) Reconfirmation
BS 7010:1988 Code of practice for a system of tolerances for the
dimensions of plastics mouldings
I/- current Confirmation
BS 7011-0:1989 Consumable accessories for light microscopes. --
General introduction
CPW/172 confirmed (2008) Reconfirmation
BS 7011-2.1:1989 Consumable accessories for light microscopes. Slides. --
Specification for dimensions and optical properties
CPW/172 confirmed (2008) Reconfirmation
BS 7012-0:1989 Light microscopes. -- General introduction CPW/172 confirmed (2008) Reconfirmation
BS 7029-1:1993 Method of specifying thermoplastics injection
mouldings. -- General requirements
I/- current Withdrawal
BS 7029-2:1993 Method of specifying thermoplastics injection
mouldings. -- Additional requirements for polycarbonate,
polyamide and polyethylene mouldings
I/- obsolescent (2009) Withdrawal
BS 7044-2.1:1989 Artificial sports surfaces. Methods of test -- Methods for
determination of ball/surface interaction
PRI/57 partially replaced by
BS EN 12234:2002
withdrawal
BS 7044-2.2:1990 Artificial sports surfaces. Methods of test -- Methods for
determination of person/surface interaction
PRI/57 partially replaced by
BS EN 14808:2005,
BS EN 14837:2006
and BS EN 15301-
1:2007
BS 7044-2.3:1990 Artificial sports surfaces. Methods of test -- Methods for
determination of durability
PRI/57 partially replaced by
BS EN 14810:2006
BS 7044-2.5:1991 Artificial sports surfaces. Methods of test --
Miscellaneous
PRI/57 partially replaced by
BS EN 12228:2002
and BS EN
12616:2003
withdrawal
BS 7079:2009 General introduction to standards for preparation of
steel substrates before application of paints and related
products
STI/21 current Confirmation
BS 7083:1996 Guide to the accommodation and operating environment
for information technology (IT) equipment
ICT/-/1 obsolescent (2009) Withdrawal
BS 7114-1:1988 Fireworks -- Classification of fireworks CII/47 obsolescent (2010)
BS 7114-2:1988 Fireworks -- Specification for fireworks CII/47 obsolescent (2010)
BS 7114-3:1988 Fireworks -- Methods of test for fireworks CII/47 partially replaced by
BS EN 14035 parts
and DD 14035:2007
Updated Nov 2013 25 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 7121-2:2003 Code of practice for safe use of cranes -- Inspection,
testing and examination
MHE/3/11 replaced by BS 7121-2-
1, BS 7121-2-3, BS
7121-2-4, BS 7121-2-
5 and BS 7121-2-7 but
will remain current
until all parts are
published
Reconfirmation
BS 7121-3:2000 Code of practice for safe use of cranes -- Mobile cranes MHE/3/11 confirmed (2007) Reconfirmation
BS 7157:1989 Method of test for ignitability of fabrics used in the
construction of large tented structures
TCI/66/-/8 confirmed (2008) Reconfirmation
BS 7175:1989 Methods of test for the ignitability of bedcovers and
pillows by smouldering and flaming ignition sources
TCI/66/-/8 confirmed (2008) Reconfirmation
BS 7208-2:1991 Contact lenses -- Method of classifying contact lens
materials
CH/172 obsolescent (2010) Withdrawal
BS 7231-1:1990 Body measurements of boys and girls from birth up to
16.9 years -- Information in the form of tables
TCI/66 confirmed (2008) Reconfirmation
BS 7231-2:1990 Body measurements of boys and girls from birth up to
16.9 years -- Recommendations of body dimensions for
children
TCI/66 confirmed (2008) Reconfirmation
BS 7273-1:2006 Code of practice for the operation of fire protection
measures -- Electrical actuation of gaseous total
flooding extinguishing systems
FSH/12/4 current Confirmation
BS 7273-2:1992 Code of practice for the operation of fire protection
measures -- Mechanical actuation of gaseous total
flooding and local application extinguishing systems
FSH/12/4 confirmed (2008) Reconfirmation
BS 7273-3:2008 Code of practice for the operation of fire protection
measures -- Electrical actuation of pre-action watermist
and sprinkler systems
FSH/12/4 current Confirmation
BS 7273-5:2008 Code of practice for the operation of fire protection
measures -- Electrical actuation of watermist systems
(except pre-action systems)
FSH/12/4 current Confirmation
BS 7288:1990 Specification for socket outlets incorporating residual
current devices (S.R.C.D.s)
PEL/23 confirmed (2008) Reconfirmation
BS 7291-4:1990 Thermoplastics pipes and associated fittings for hot and
cold water for domestic purposes and heating
installations in buildings -- Specification for chlorinated
polyvinyl chloride (PVC-C) pipes and associated fittings
and solvent cement
PRI/88 obsolescent (2009) Withdrawal
BS 7317-1:1990 Methods for analysis of high purity copper cathode Cu-
CATH-1 -- Method for determination of cadmium,
manganese and silver (screening procedure for
chromium, cobalt, iron, nickel and zinc) by atomic
absorption spectrophotometry
NFE/34 confirmed (2008) Reconfirmation
BS 7317-2:1990 Methods for analysis of high purity copper cathode Cu-
CATH-1 -- Method for determination of chromium,
cobalt, iron, nickel and zinc by discrete volume
nebulization atomic absorption spectrophotometry
NFE/34 confirmed (2008) Reconfirmation
BS 7317-3:1990 Methods for analysis of high purity copper cathode Cu-
CATH-1 -- Method for determination of antimony,
arsenic, bismuth, selenium, tellurium and tin by hydride
generation and atomic absorption spectrophotometry
NFE/34 confirmed (2008) Reconfirmation
BS 7317-4:1990 Methods for analysis of high purity copper cathode Cu-
CATH-1 -- Method for determination of antimony,
arsenic, bismuth, lead, selenium, tellurium and tin by
electrothermal atomization atomic absorption
spectrophotometry
NFE/34 confirmed (2008) Reconfirmation
Updated Nov 2013 26 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 7317-5:1990 Methods for analysis of high purity copper cathode Cu-
CATH-1 -- Method for determination of sulphur by
hydrogen sulphide evolution and spectrophotometry
NFE/34 confirmed (2008) Reconfirmation
BS 7317-6:1990 Methods for analysis of high purity copper cathode Cu-
CATH-1 -- Method for determination of phosphorus and
silicon by spectrophotometry
NFE/34 confirmed (2008) Reconfirmation
BS 7317-7:1990 Methods for analysis of high purity copper cathode Cu-
CATH-1 -- Method for determination of lead by
lanthanum hydroxide separation and atomic absorption
spectrophotometry
NFE/34 confirmed (2008) Reconfirmation
BS 7332:1990 Specification for decorative continuous laminates (DCL)
based on thermosetting resins
PRI/76 obsolescent (2010) Withdrawal
BS 7346-4:2003 Components for smoke and heat control systems --
Functional recommendations and calculation methods
for smoke and heat exhaust ventilation systems,
employing steady-state design fires. Code of practice
FSH/25 confirmed (2008) Reconfirmation
BS 7354:1990 Code of practice for design of high-voltage open-
terminal stations
PEL/17/1 it is partially
superseded by BS EN
61936-1:2010 and BS
EN 50522:2010
Withdrawal
BS 7361-1:1991 Cathodic protection -- Code of practice for land and
marine applications
GEL/603 partially replaced by
BS EN 15112:2006
and BS EN
13636:2004
Withdrawal
BS 7362:1990 Specification for telex terminal apparatus for connection
to public telecommunications operators' telex networks
TCT/2 obsolescent (2011) withdrawal
BS 7364:1990 Specification for galvanized steel studs and channels for
stud and sheet partitions and linings using screw fixed
gypsum wallboards
B/544 confirmed (2008) Reconfirmation
BS 7367:1991 Specification for manufacture of glass bottles for
carbonated soft drinks including carbonated water
PKW/0/-/7 confirmed (2008) Reconfirmation
BS 7371-12:2008 Coatings on metal fasteners -- Requirements for
imperial fasteners
FME/9 current Confirmation
BS 7378-1:1997 Apparatus for connection to public telecommunications
systems using the Digital Access Signalling System No.
2 (DASS 2) via a 2048 kbit/s CCITT Recommendation
G.703 interface -- General requirements
TCT/6 obsolescent (2008) withdrawal
BS 7402:1991 Guide to specifying electronic typographic markup
(SETM)
I/- current Withdrawal
BS 7436:1996 Specification for data transfer between agricultural
tractors and attached machinery (data bus protocol)
AGE/6 obsolescent (2010) Withdrawal
BS 7442-4.1:1992 Rubber or plastics covered rollers. Requirements --
Specification for apparent hardness
PRI/73 confirmed (2008) Reconfirmation
BS 7442-4.2:1994 Rubber or plastics covered rollers. Requirements --
Classification by surface finish
PRI/73 confirmed (2008) Reconfirmation
BS 7444:1991 Specification for molecular sieves (of type 4A) I/- obsolescent (2009) Withdrawal
BS 7445-1:2003 Description and measurement of environmental noise --
Guide to quantities and procedures
EH/1/3 confirmed (2008) Reconfirmation
BS 7453-1:1991 Procedures for UK registration for Open Systems
standards. -- Procedures for the UK Name Registration
Authority
ICT/-/1 confirmed (2008) Reconfirmation
BS 7460:1991 Code of practice for use of spray extraction machines
on carpets and soft floor coverings in hospitals
CPL/61/10 confirmed (2008) Reconfirmation
Updated Nov 2013 27 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 7488:1991 Recommendations for handling glass bottles, containing
carbonated soft drinks or carbonated water, in filling
plants, warehouses, and retailers' premises
PKW/0/-/7 confirmed (2008) Reconfirmation
BS 7500:1995 Specification for marking of recycled paper board I/- current Confirmation
BS 7505:1995 Specification for the elastic properties of flat, non-
adhesive, extensible fabric bandages
CH/205/1 confirmed (2008) Reconfirmation
BS 7506-1:1995 Methods for measurement in electrostatics -- Guide to
basic electrostatics
PRI/22/-/5 confirmed (2008) Reconfirmation
BS 7506-2:1996 Methods for measurement in electrostatics -- Test
methods
PRI/22/-/5 confirmed (2008) Reconfirmation
BS 7529:1991 Specification for desiccant activated clay I/- obsolescent (2009) Withdrawal
BS 7533-1:2001 Pavements constructed with clay, natural stone or
concrete pavers -- Guide for the structural design of
heavy duty pavements constructed of clay pavers or
precast concrete paving blocks
B/507 confirmed (2008) Reconfirmation
BS 7533-11:2003 Pavements constructed with clay, natural stone or
concrete pavers -- Code of practice for the opening,
maintenance and reinstatement of pavements of
concrete, clay and natural stone
B/507 confirmed (2008) Reconfirmation
BS 7533-2:2001 Pavements constructed with clay, natural stone or
concrete pavers -- Guide for the structural design of
lightly trafficked pavements constructed of clay pavers
or precast concrete paving blocks
B/507 confirmed (2008) Reconfirmation
BS 7533-6:1999 Pavements constructed with clay, natural stone or
concrete pavers -- Code of practice for laying natural
stone, precast concrete and clay kerb units
B/507 confirmed (2008) Reconfirmation
BS 7533-8:2003 Pavements constructed with clay, natural stone or
concrete pavers -- Guide for the structural design of
lightly trafficked pavements of precast concrete flags
and natural stone flags
B/507 confirmed (2008) Reconfirmation
BS 7546-1:1992 Hydrogen peroxide for industrial use -- Method for
determination of hydrogen peroxide content
I/- obsolescent (2009) Withdrawal
BS 7546-2:1992 Hydrogen peroxide for industrial use -- Method for
determination of stability at 100$0DC
I/- obsolescent (2009) Withdrawal
BS 7546-3:1992 Hydrogen peroxide for industrial use -- Method for
determination of apparent acidity
I/- obsolescent (2009) Withdrawal
BS 7554:1992 Specification for beaded desiccant silica gel I/- obsolescent (2009) Withdrawal
BS 7562-3:1995 Planning, design and installation of irrigation schemes --
Guide to irrigation water requirements
AGE/30 confirmed (2008) Reconfirmation
BS 7588:1993 Guide to hierarchical interconnection technology EPL/48 obsolescent (2008) Withdrawal
BS 759-1:1984 Valves, gauges and other safety fittings for application
to boilers and to piping installations for and in
connection with boilers -- Specification for valves,
mountings and fittings
PSE/18/6 confirmed (2008) Reconfirmation
BS 7592:2008 Sampling for Legionella bacteria in water systems. Code
of practice
EH/3/4 current Confirmation
BS 7609:1992+A2:2009 Code of practice for installation and inspection of
uninsulated compression and mechanical connectors
for power cables with copper or aluminium conductors
GEL/20/11 confirmed (2007) Reconfirmation
BS 7629-1:2008 Electric cables. Specification for 300/500 V fire resistant
screened cables having low emission of smoke and
corrosive gases when affected by fire -- Multicore and
multipair cables
GEL/20/17 current Confirmation
BS 7644-1:1993 Direct tension indicators. -- Specification for
compressible washers
FME/9 replaced by BS EN
14399-9:2009
Withdrawal
BS 7644-2:1993 Direct tension indicators -- Specification for nut face and
bolt face washers
FME/9 replaced by BS EN
14399-9:2009
Withdrawal
Updated Nov 2013 28 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 7663:1993 Methods of test for determination of permittivity and
dissipation factor of electrical insulating material in
sheet or tubular form
PRI/22/-/5 confirmed (2008) Reconfirmation
BS 7672:1993 Specification for compression, stiffness and labelling of
anti-embolism hosiery
CH/205/1 current Confirmation
BS 7752-1:1994+A1:2008Free running type wire thread inserts -- Specification for
ISO metric coarse pitch threads
FME/9 confirmed (2004) Reconfirmation
BS 7770:1995 Guide to the preparation of climatic data and its
application to building and civil engineering
CB/101 obsolescent (2009) Withdrawal
BS 78-2:1965 Specification for cast iron spigot and socket pipes
(vertically cast) and spigot and socket fittings -- Fittings
PSE/10 partially replaced by
BS 4772:1988
Withdrawal
BS 7825-3.1:1997 Calibration of rubber and plastics test equipment.
Calibration schedules -- Thermal properties
PRI/20 obsolescent (2008) Withdrawal
BS 7825-3.2:1997 Calibration of rubber and plastics test equipment.
Calibration schedules -- Electrical properties
PRI/20 obsolescent (2008) Withdrawal
BS 7825-3.3:1997 Calibration of rubber and plastics test equipment.
Calibration schedules -- Mechanical properties of
plastics
PRI/20 obsolescent (2008) Withdrawal
BS 7825-3.4:1998 Calibration of rubber and plastics test equipment.
Calibration schedules -- Mechanical properties of rubber
PRI/20 obsolescent (2008) Withdrawal
BS 7825-3.5:1997 Calibration of rubber and plastics test equipment.
Calibration schedules -- Optical and weathering
properties
PRI/20 obsolescent (2008) Withdrawal
BS 7825-3.6:1997 Calibration of rubber and plastics test equipment.
Calibration schedules -- Dimensional properties
PRI/20 obsolescent (2008) Withdrawal
BS 7833:1995 Specification for firefighters' axes with glass fibre shafts MTE/15 confirmed (2008) Reconfirmation
BS 7837:1996 Specification for flammability performance for textiles
used in the construction of marquees and similar textile
structures
TCI/66/-/8 confirmed (2008)
BS 7844-3:1998 Three-phase dry-type distribution transformers 50 Hz,
from 100 to 2500 kVA with highest voltage for
equipment not exceeding 36 kV -- Determination of the
power rating of a transformer loaded with non-sinusoidal
current
PEL/14 obsolescent (2008) withdrawal
BS 7870-7.1:2003 LV and MV polymeric insulated cables for use by
distribution and generation utilities. Specification for
power cables having rated voltages of 3.8/6.6 kV and
6.35/11 kV with special fire performance for use in
power stations -- Single core and 3-core cables with
halogenated materials and with aluminium or steel wire
armouring
GEL/20/16 obsolescent (2008) Withdrawal
BS 7870-7.2:2003 LV and MV polymeric insulated cables for use by
distribution and generation utilities. Specification for
power cables having rated voltages of 3.8/6.6 kV and
6.35/11 kV with special fire performance for use in
power stations -- Single-core and 3-core cables with
halogen-free materials and with aluminium or steel wire
armouring
GEL/20/16 obsolescent (2008) Withdrawal
BS 7870-8.1:2003 LV and MV polymeric insulated cables for use by
distribution and generation utilities. Specification for
multicore and multipair cables for installation above and
below ground -- Section 8.1 Single wire armoured and
PVC sheathed multicore cable with copper conductors
GEL/20/16 confirmed (2008) Reconfirmation
BS 7870-8.2:2003 LV and MV polymeric insulated cables for use by
distribution and generation utilities. Specification for
multicore and multipair cables for installation above and
below ground -- Section 8.2 Single wire armoured and
PVC sheathed multipair cable with copper conductors
GEL/20/16 confirmed (2008) Reconfirmation
Updated Nov 2013 29 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 7870-8.3:2003 LV and MV polymeric insulated cables for use by
distribution and generation utilities. Specification for
multicore and multipair cables for installation above and
below ground -- Section 8.3 Single wire armoured and
PVC sheathed multicore cable with copper conductors,
having reduced fire propagation performance
GEL/20/16 confirmed (2008) Reconfirmation
BS 7870-8.4:2003 LV and MV polymeric insulated cables for use by
distribution and generation utilities. Specification for
multicore and multipair cables for installation above and
below ground -- Section 8.4 Single wire or double steel
tape armoured and PVC sheathed multipair cable with
copper conductors, having reduced fire propagation
performance
GEL/20/16 confirmed (2008) Reconfirmation
BS 7870-8.5:2003 LV and MV polymeric insulated cables for use by
distribution and generation utilities. Specification for
multicore and multipair cables for installation above and
below ground -- Section 8.5 Single wire armoured and
unarmoured multicore cables with copper conductors
and non-halogenated sheath
GEL/20/16 confirmed (2008) Reconfirmation
BS 7870-8.6:2003 LV and MV polymeric insulated cables for use by
distribution and generation utilities. Specification for
multicore and multipair cables for installation above and
below ground -- Section 8.6 Single wire or double steel
tape armoured and non-halogenated sheathed multipair
cable with copper conductors
GEL/20/16 confirmed (2008) Reconfirmation
BS 7871-1:1996 Pneumatic conveying -- Glossary of terms MHE/9 confirmed (2008) Reconfirmation
BS 7876:1996 Classification of prints I/- current Confirmation
BS 7881:1997 Method of test for petrol filters MCE/21/6 obsolescent (2010) Withdrawal
BS 7884:1997 Specification for copper and copper-cadmium stranded
conductors for overhead electric traction and power
transmission systems
NFE/34 confirmed (2008) Reconfirmation
BS 7894:2003 MV impregnated paper insulated distribution cables of
rated voltages of 3.8/6.6 kV to 19/33 kV
GEL/20/16 obsolescent (2008) Withdrawal
BS 7903:1997 Guide to selection and use of gully tops and manhole
covers for installation within the highway
B/505 confirmed (2008) Reconfirmation
BS 7930-1:1998 Specification for eye-protectors for racket sports --
Squash
PH/2/9 confirmed (2008) Reconfirmation
BS 7932:2003 Determination of the unpolished and polished pendulum
test value of surfacing units
B/507 confirmed (2008) Reconfirmation
BS 7933-1:2007 Electric cables. Accessories. Material characterisation --
Fingerprinting and type tests for resinous compounds
GEL/20/11 current Confirmation
BS 7933-2:2007 Electric cables. Accessories. Material characterisation --
Fingerprinting and type tests for heat shrinkable
components for low voltage applications
GEL/20/11 current Confirmation
BS 7933-3:2008 Electric cables. Accessories. Material characterisation --
Fingerprinting for heat shrinkable components for
medium voltage applications from 3,6/6 (7,2) kV up to
20,8/36 (42) kV
GEL/20/11 current Confirmation
BS 7933-4:2008 Electric cables. Accessories. Material characterisation --
Fingerprinting for cold shrinkable components for low
and medium voltage applications up to 20,8/36 (42) kV
GEL/20/11 current Confirmation
BS 7943:1999 Guide to the interpretation of petrographical
examinations for alkali-silica reactivity
B/502 confirmed (2008) Reconfirmation
Updated Nov 2013 30 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 7948-1:1997 Films for wrapping rubber bales. -- Non-strippable high
melting point films
PRI/50 confirmed (2008) Reconfirmation
BS 7954:1999 Beaded desiccant activated alumina. Specification I/- obsolescent (2009) Withdrawal
BS 7977-2:2003 Specification for safety and rational use of energy of
domestic gas appliances -- Combined appliances. Gas
fire/back boiler
GSE/36 confirmed (2008) Reconfirmation
BS 7990:2003 Tube furnace method for the determination of toxic
product yields in fire effluents
FSH/16 confirmed (2008) Reconfirmation
BS 799-2:1991 Oil burning equipment -- Specification for vaporizing
burners
RHE/13 confirmed (2008) Reconfirmation
BS 799-3:1981 Oil burning equipment -- Automatic and semi-automatic
atomizing burners up to 36 litres per hour
GSE/27 confirmed (2008) Reconfirmation
BS 799-4:1991 Oil burning equipment -- Specification for atomizing
burners (other than monobloc type) together with
associated equipment for single burner and multi burner
installations
GSE/27 confirmed (2008) Reconfirmation
BS 7F 34:2002 Light and medium duty linen (flax) sewing thread for
aerospace purposes
ACE/65 confirmed (2008) Reconfirmation
BS 7F 8:1992 Specification for 140 g /m$u2 mercerized cotton fabrics
and serrated edge strip for aerospace purposes
ACE/65 confirmed (2008) Reconfirmation
BS 8000-3:2001 Workmanship on building sites -- Code of practice for
masonry
B/525/6 confirmed (2008) Reconfirmation
BS 8000-7:1990 Workmanship on building sites -- Code of practice for
glazing
B/520/4 confirmed (2008) Reconfirmation
BS 8104:1992 Code of practice for assessing exposure of walls to wind-
driven rain
B/525/6 confirmed (2008) Reconfirmation
BS 817:2008 Specification for surface plates TDW/4 current Confirmation
BS 8206-2:2008 Lighting for buildings -- Code of practice for daylighting EL/1 current Confirmation
BS 8214:2008 Code of practice for fire door assemblies B/538/2 current
BS 8215:1991 Code of practice for design and installation of damp-
proof courses in masonry construction
B/546 current Confirmation
BS 826:1978 Specification for steel single tier bolted shelving (angle
upright type)
MHE/8 confirmed (2008)
BS 8401:2003 Health informatics standards.Status as of July 2001.
Guide
IST/35 confirmed (2008) Withdrawal
BS 8403:2002 Specification for aquatic spineboards for recovering
casualties in controlled aquatic conditions
CH/239 current Confirmation
BS 8404:2001 Packaging. Child-resistant packaging. Requirements
and testing procedures for non-reclosable packages for
pharmaceutical products
PKW/0/3 replaced by BS EN
14375:2003 and has
been declared
obsolescent
Withdrawal
BS 8416:2002 Specification for hole-saws MTE/20 confirmed (2008) Reconfirmation
BS 8420:2003 Methods of measuring irregularities on surfaces of
roads, footways and other paved areas using
straightedges and wedges
B/510/5 confirmed (2008) Reconfirmation
BS 8421-1:2003 Guide to health informatics. Results of healthcare
service procedures. Delivery to end-users -- General
guidance and recommendations
IST/35 confirmed (2008) withdrawal
BS 8426:2003 A code of practice for e-support in e-learning systems IST/43 confirmed (2008) Reconfirmation
BS 8468-4:2008 Respiratory protective devices for use against chemical,
biological, radiological and nuclear (CBRN) agents --
Powered air-purifying respirators. Specification
PH/4 current
BS 8473:2006+A1:2008 Intruder and hold-up alarm systems. Management of
false alarms. Code of practice
GW/1 current Confirmation
Updated Nov 2013 31 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 8479:2008 Textiles. Method for determination of the propensity of
fabrics to snagging. Rotating chamber method
TCI/24 current Confirmation
BS 8498:2008 British Standards for screw threads and screw gauges.
Introduction and guidance
FME/9 current Confirmation
BS 8502:2003 Graphical symbols and signs. Creation and design of
public information symbols. Requirements
PH/8/2 confirmed (2008) Reconfirmation
BS 8507-1:2008 Code of practice for close protection services --
Services within the United Kingdom
GW/3 current Confirmation
BS 8512:2008 Electric cables. Code of practice for the storage,
handling, installation and disposal of cables on wooden
drums
GEL/20/17 current Confirmation
BS 8555:2003 Environmental management systems. Guide to the
phased implementation of an environmental
management system including the use of environmental
performance evaluation
SES/1/1 current Confirmation
BS 8666:2005 Scheduling, dimensioning, bending and cutting of steel
reinforcement for concrete. Specification
ISE/104 current
BS 870:2008 Specification for external micrometers TDW/4 replaced by BS EN
ISO 3611:2010 and
has been declared
obsolescent
withdrawal
BS 879-1:1985 Water well casing. -- Specification for steel tubes for
casing
PSE/1 confirmed (2008) Reconfirmation
BS 879-2:1988 Water well casing. -- Specification for thermoplastics
tubes for casing and slotted casing
PSE/1 confirmed (2008) Reconfirmation
BS 887:2008 Precision vernier callipers. Requirements and test
methods
TDW/4 replaced by BS EN
ISO 13385-1:2011 and
has been declared
obsolescent
withdrawal
BS 9000-1:1989 General requirements for a system for electronic
components of assessed quality -- Specification of
general procedures
EPL/40X obsolescent (2010) Reconfirmation
BS 9000-5:1989 General requirements for a system for electronic
components of assessed quality -- Specification of
qualification approval and conformance testing
procedures
EPL/40X obsolescent (2010) Reconfirmation
BS 9000-6:1989 General requirements for a system for electronic
components of assessed quality -- Specification of
capability approval procedures
EPL/40X obsolescent (2010) Reconfirmation
BS 9000-7:1989 General requirements for a system for electronic
components of assessed quality -- Specification of lot
formation, release procedures and certified test records
EPL/40X obsolescent (2010) Reconfirmation
BS 9030:1971 Specification for magnetrons of assessed quality:
generic data and methods of test
EPL/39 obsolescent (2011) Withdrawal
BS 9031:1971 Rules for the preparation of detail specifications for
pulsed fixed-frequency magnetrons of assessed quality
EPL/39 obsolescent (2011) Withdrawal
BS 9032:1975 Rules for the preparation of detail specifications for
pulsed magnetrons (excluding frequency-agile
magnetrons) of assessed quality. Basic assessment
level
EPL/39 obsolescent (2011) Withdrawal
BS 9040:1978 Specification for gas-filled microwave switching tubes of
assessed quality: generic data and methods of test
EPL/39 obsolescent (2011) Withdrawal
BS 9041:1978 Rules for the preparation of detail specifications for gas
filled microwave switching tubes of assessed quality:
tunable and broadband TR tubes and TR limiters. Full
assessment level
EPL/39 obsolescent (2011) Withdrawal
Updated Nov 2013 32 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 9050:1971 Specification for cathode ray tubes of assessed quality:
generic data and methods of test
EPL/39 obsolescent (2011) Withdrawal
BS 9054:1971 Rules for the preparation of detail specifications for
radar display cathode ray tubes of assessed quality
EPL/39 obsolescent (2011) Withdrawal
BS 907:2008 Specification for dial gauges for linear measurement TDW/4 replaced by BS EN
ISO 463:2006 and has
been declared
obsolescent
withdrawal
BS 9100:1983 Specification for capability approval for custom-built
capacitors and capacitor modules: generic data and
methods of test
EPL/51 obsolescent (2008) Reconfirmation
BS 9124:2008 Specification for steel and aluminium access cover
systems with over 1 m clear opening
B/505 current Confirmation
BS 9125:1988 Specification for capability approval of manufacturers of
passive radio interference suppression filter units of
assessed quality generic data
EPL/40X partially replaced by
BS EN 133000:1997
Reconfirmation
BS 9133:1973 Rules for the preparation of detail specifications for
single turn low power rotary potentiometers of assessed
quality
EPL/40X obsolescent (2009) Reconfirmation
BS 93:2008 British Association (B.A.) screw threads. Requirements FME/9 current Confirmation
BS 9300 C199-276:1971 Detail specification for silicon voltage-regulator diodes EPL/47 obsolescent (2009) Withdrawal
BS 9300 C377-378:1971 Detail specifications for silicon coaxial mixer diodes EPL/47 obsolescent (2009) Withdrawal
BS 9300 C379-388:1971 Detail specifications for silicon stud mounted, power
rectifier diodes
EPL/47 obsolescent (2009) Withdrawal
BS 9300 C405-429:1971 Detail specifications for silicon voltage-regulator diodes EPL/47 obsolescent (2009) Withdrawal
BS 9300 C476:1973 Detail specification for silicon avalanche rectifier diode EPL/47 obsolescent (2009) Withdrawal
BS 9300 C534:1971 Detail specification for silicon coaxial resistive switching
diode
EPL/47 obsolescent (2009) Withdrawal
BS 9300 C582-584:1971 Detail specifications for reverse blocking triode
thyristors
EPL/47 obsolescent (2009) Withdrawal
BS 9300 C599:1971 Detail specification for silicon microwave switching
diode, rod mounted
EPL/47 obsolescent (2009) Withdrawal
BS 9300 C667-668:1971 Detail specification for silicon avalanche rectifier diodes EPL/47 obsolescent (2009) Withdrawal
BS 9300 C678-721:1971 Detail specification for silicon voltage regulator diodes EPL/47 obsolescent (2009) Withdrawal
BS 9300 C762:1971 Detail specification for mixer diodes for use at X-band
frequencies
EPL/47 obsolescent (2009) Withdrawal
BS 9300 C771-772:1971 Detail specification for coaxial mixer diodes EPL/47 obsolescent (2009) Withdrawal
BS 9300 C776-777:1971 Detail specification for germanium coaxial mixer diodes EPL/47 obsolescent (2009) Withdrawal
BS 9300 C778:1971 Detail specification for a matched pair of germanium
coaxial mixer diodes
EPL/47 obsolescent (2009) Withdrawal
BS 9300 C780-831:1971 Detail specification for silicon voltage regulator diodes EPL/47 obsolescent (2009) Withdrawal
BS 9300 C841-849:1971 Detail specification for silicon voltage regulator diodes EPL/47 obsolescent (2009) Withdrawal
BS 9301 N002:1971 Detail specification for general purpose silicon signal
diodes. 150 mA, 150 V, hermetically sealed, glass
encapsulation. General application category Q
EPL/47 obsolescent (2009) Withdrawal
BS 9305 N001:1972 Detail specification for silicon voltage regulator diodes.
1.5 W, 3.3 to 33 V (5%), hermetically sealed. General
application category Q
EPL/47 obsolescent (2009) Withdrawal
Updated Nov 2013 33 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 9305 N041:1972 Detail specification for silicon voltage regulator diodes.
400 mW, 2.7 to 33 V (5%), hermetically sealed, glass
encapsulation. General application category Q
EPL/47 obsolescent (2009) Withdrawal
BS 9305 N042:1972 Detail specification for silicon voltage regulator diodes.
1.5 W, 6.8 to 200 V (5%), hermetically sealed. General
application category C
EPL/47 obsolescent (2009) Withdrawal
BS 9305 N044:1974 Detail specification for silicon voltage regulator diodes.
1.0 W, 3.3 to 33 V (5%), hermetically sealed. Full
assessment level
EPL/47 obsolescent (2009) Withdrawal
BS 9364 N007 and N009:1978Detail specification for low power silicon n-p-n switching
transistors. 20 V, planar epitaxial, ambient rated,
hermetic encapsulation. Full plus additional assessment
level
EPL/47 obsolescent (2009) Withdrawal
BS 9364 N008 and N010:1978Detail specification for low power silicon n-p-n switching
transistors. 20 V, planar epitaxial, ambient rated,
hermetic encapsulation (long lead version). Full plus
additional assessment level
EPL/47 obsolescent (2009) Withdrawal
BS 9364 N011:1978 Detail specification for low power silicon p-n-p switching
transistors. 65 V, planar epitaxial, ambient rated,
hermetic encapsulation. Full plus additional assessment
level
EPL/47 obsolescent (2009) Withdrawal
BS 9364 N012:1978 Detail specification for low power silicon p-n-p switching
transistors. 65 V, planar epitaxial, ambient rated,
hermetic encapsulation (long lead version). Full plus
additional assessment level
EPL/47 obsolescent (2009) Withdrawal
BS 9364 N013:1979 Detail specification for low power silicon p-n-p switching
transistors. 25 V, planar epitaxial, ambient rated,
hermetic encapsulation. Full plus additional assessment
level
EPL/47 obsolescent (2009) Withdrawal
BS 9364 N016:1979 Detail specification for low power silicon n-p-n switching
transistors. 65 V, planar epitaxial, ambient rated,
hermetic encapsulation. Full plus additional assessment
level
EPL/47 obsolescent (2009) Withdrawal
BS 9364 N017:1979 Detail specification for low power silicon n-p-n switching
transistors. 65 V, planar epitaxial, ambient rated,
hermetic encapsulation (long lead version). Full plus
additional assessment level
EPL/47 obsolescent (2009) Withdrawal
BS 9450:1998 Specification for integrated electronic circuits and micro-
assemblies of assessed quality (capability approval
procedures). Generic data and methods of test
EPL/47 replaced by BS IEC
60747-10:1991 and BS
IEC 60748-11:2000
and has been declared
obsolescent
Withdrawal
BS 9520:1983 Specification for electrical connectors of assessed
quality for d.c. and low frequency application: generic
data, methods of test and capability approval
procedures
EPL/48 obsolescent (2008) Withdrawal
BS 9522 N0001:1982 Detail specification for multi-contact circular electrical
connectors for d.c. and low frequency applications.
Bayonet coupling with front release, rear removable
crimp contacts. Full assessment level
EPL/48 confirmed (2008) Reconfirmation
BS 9522 N0003:1990 Detail specification for multi-contact circular electrical
connectors for d.c. and low frequency applications.
Bayonet coupling non-barrier sealed, environment
resistant with rear insertable, rear release, rear
removable crimp contacts also barrier sealed with non-
removable solder contact styles. Full plus airframe fit
assessment.
EPL/48 obsolescent (2008) Withdrawal
BS 952-2:1980 Glass for glazing -- Terminology for work on glass B/520/4 confirmed (2007) Reconfirmation
Updated Nov 2013 34 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 9522:1990 Rules for the preparation of detail specifications for
circular electrical connectors of assessed quality for d.c.
and low frequency applications. Full, basic and full plus
airframe assessment levels
EPL/48 obsolescent (2008) Withdrawal
BS 9523:1984 Rules for the preparation of detail specifications for
rectangular electrical connectors of assessed quality
with integral metal housings for d.c. and low frequency
applications. Full and basic assessment levels
EPL/48 obsolescent (2008) Withdrawal
BS 9524:1984 Rules for the preparation of detail specifications for
rectangular electrical connectors of assessed quality
with moulded bodies for d.c. and low frequency
applications. Full and basic assessment levels
EPL/48 obsolescent (2008) Withdrawal
BS 9525 N0001:1982 Detail specification for multi-contact two-part printed
board electrical connectors
EPL/48 confirmed (2008) Reconfirmation
BS 9525:1984 Rules for the preparation of detail specifications for two-
part printed board electrical connectors and board-
mounted transition devices of assessed quality for d.c.
and l.f. applications: full and basic assessment levels
EPL/48 obsolescent (2008) Withdrawal
BS 957:2008 Specification for feeler gauges TDW/4 current Confirmation
BS 959:2008 Specification for internal micrometers (including stick
micrometers)
TDW/4 current
BS 9612 N004:1977 Detail specification for cold welded seal quartz crystal
units for oscillator applications. DN, 47 U/2, DQ and DP
enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency
ranges. Fundamental thickness-shear mode, AT-cut, for
operation over wide temperature ranges (non-
temperature controlled). Full assessment level
EPL/49 obsolescent (2011) Withdrawal
BS 9612 N005:1977 Detail specification for cold welded seal quartz crystal
units for oscillator applications. DN, DQ and DP
enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency
ranges. Fundamental thickness-shear mode, AT-cut, for
operation over narrow temperature ranges (temperature
controlled). Full assessment level
EPL/49 obsolescent (2011) Withdrawal
BS 9612 N006:1977 Detail specification for cold welded seal quartz crystal
units for oscillator applications. DN, 47 U/2, DQ and DP
enclosures, 17 to 75 MHz frequency range. Third
overtone thickness-shear mode, AT-cut, for operation
over wide temperature ranges (non-temperature
controlled). Full assessment level
EPL/49 obsolescent (2011) Withdrawal
BS 9612 N008:1977 Detail specification for cold welded seal quartz crystal
units for oscillator applications. DN, DQ and DP
enclosures, 50 to 125 MHz frequency range. Fifth
overtone thickness-shear mode, AT-cut, for operation
over wide temperature ranges (non-temperature
controlled). Full assessment level
EPL/49 obsolescent (2011) Withdrawal
BS 9612 N009:1977 Detail specification for cold welded seal quartz crystal
units for oscillator applications. DN, DQ and DP
enclosures, 50 to 125 MHz frequency range. Fifth
overtone thickness-shear mode, AT-cut, for operation
over narrow temperature ranges (temperature
controlled). Full assessment level
EPL/49 obsolescent (2011) Withdrawal
Updated Nov 2013 35 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS 9612 N010:1979 Detail specification for cold welded seal quartz crystal
units for oscillator applications. DK enclosure, 6.0 to 25
MHz frequency range. Fundamental thickness-shear
mode, AT-cut, for operation over wide temperature
ranges (non-temperature controlled). Full assessment
level
EPL/49 obsolescent (2011) Withdrawal
BS 9612 N016:1979 Detail specification for resistance welded seal quartz
crystal units for oscillator applications. DN, DZ, DQ and
DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz
frequency ranges. Fundamental thickness-shear mode,
AT-cut, for operation over wide temperature ranges (non-
temperature controlled). Full assessment level
EPL/49 obsolescent (2011) Withdrawal
BS 9612 N017:1979 Detail specification for resistance welded seal quartz
crystal units for oscillator applications. DN, DZ, DQ and
DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz
frequency ranges. Fundamental thickness-shear mode,
AT-cut, for operation over narrow temperature ranges
(temperature controlled). Full assessment level
EPL/49 obsolescent (2011) Withdrawal
BS 9612 N018:1979 Detail specification for resistance welded seal quartz
crystal units for oscillator applications. DN, DZ, DQ and
DP enclosures, 17 to 75 MHz frequency range. Third
overtone thickness-shear mode, AT-cut, for operation
over wide temperature ranges (non-temperature
controlled). Full assessment level
EPL/49 obsolescent (2011) Withdrawal
BS 9612 N019:1979 Detail specification for resistance welded seal quartz
crystal units for oscillator applications. DN, DZ, DQ and
DP enclosures, 17 to 75 MHz frequency range. Third
overtone thickness-shear mode, AT-cut, for operation
over narrow temperature ranges (temperature
controlled). Full assessment level
EPL/49 obsolescent (2011) Withdrawal
BS 9612 N020:1979 Detail specification for resistance welded seal quartz
crystal units for oscillator applications. DN, DZ, DQ and
DP enclosures, 50 to 125 MHz frequency range. Fifth
overtone thickness-shear mode, AT-cut, for operation
over wide temperature ranges (non-temperature
controlled). Full assessment level
EPL/49 obsolescent (2011) Withdrawal
BS 9612 N021:1979 Detail specification for resistance welded seal quartz
crystal units for oscillator applications. DN, DZ, DQ and
DP enclosures, 50 to 125 MHz frequency range. Fifth
overtone thickness-shear mode, AT-cut, for operation
over narrow temperature ranges (temperature
controlled). Full assessment level
EPL/49 obsolescent (2008) Withdrawal
BS 9617:1982 Rules for the preparation of detail specifications for
quartz crystal units of assessed quality. Full
assessment level
EPL/49 obsolescent (2011) Withdrawal
BS 9625:1983 Blank detail specification for quartz crystal oscillators of
assessed quality: full assessment level
EPL/49 obsolescent (2011) Withdrawal
BS 9720:1989 Specification for custom-built transformers and
inductors of assessed quality: generic data and
methods of test
EPL/51 obsolescent (2011) Reconfirmation
BS 999:1962 Schedule of tests for coke ovens E/- obsolescent (2010) Withdrawal
BS 9999:2008 Code of practice for fire safety in the design,
management and use of buildings
FSH/14 current
BS 9F 1:1992 Specification for 140 g/m$u2 linen (flax) fabric and
serrated edge strip for aerospace purposes
ACE/65 confirmed (2008) Reconfirmation
Updated Nov 2013 36 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
BS A 254; A 255 [...]:1976Specification. Hexagonal head titanium alloy bolts 160
000 lbf/in$u2 (1100 MPa)
ACE/12 confirmed (2008) Reconfirmation
BS A 266; A 267 [...]:1977Specification for 100$0D countersunk head titanium
alloy bolts 160 000 lbf/in$u2 (1100 MPa) with Hi-torque
speed drive recesses
ACE/12 confirmed (2008) Reconfirmation
BS A 272:1977 Specification for Hi-torque speed drive recess:
dimensions and gauging for countersunk head fasteners
ACE/12 confirmed (2008) Reconfirmation
BS A 273:1978 Specification for gauging practice for 100$0D
countersunk head fasteners for flushness control
ACE/12 confirmed (2008) Reconfirmation
BS AU 141a:1971 Specification for the performance of diesel engines for
road vehicles
MCE/22 obsolescent (2011) Withdrawal
BS AU 257:2002 Code of practice for remanufacture of spark and
compression ignition engines
MCE/22 confirmed (2008) Reconfirmation
BS AU 268:2003 Passenger cars and light vans. Commercial towing pole
assemblies. Specification
AUE/9 confirmed (2008) Reconfirmation
BS F 133:1988 Specification for warp knitted nylon fabric for aerospace
purposes
ACE/65 confirmed (2008) Reconfirmation
BS F 139:1989 Specification for aluminized polychloroprene rubber-
coated nylon fabric (350 g/m$u2) for aerospace
purposes
ACE/65 confirmed (2008) Reconfirmation
BS F 141:1992 Specification for closely woven cotton fabrics (L28 and
L34) for aerospace purposes
ACE/65 obsolescent (2008) Withdrawal
BS G 225:1979 Specification for performance of environment-resistant
terminal junction modules with removable crimp-type
contacts
ACE/6 obsolescent (2009) Withdrawal
BS HC 401:1974 Specification for 18% nickel maraging steel precision
castings (1600-1850 MPa)
ACE/61/-/15 obsolescent (2010) Reconfirmation
BS HC 402:1977 Specification for cast iron ring pots (centrifugally cast)
(suitable for piston rings up to 200 mm in diameter)
ACE/61/-/15 obsolescent (2010) Withdrawal
BS HC 404:1977 Specification for chromium-molybdenum alloy cast iron
ring pots (suitable for centrifugally cast and sand cast
sealing rings, piston rings and cylinder liners)
ACE/61/-/15 obsolescent (2008) Withdrawal
BS L 170:1989 Specification for extruded bars and sections of
aluminium-zinc-copper-chromium alloy (solution treated,
controlled stretched and artificially aged) (not exceeding
150 mm diameter or minor sectional dimension) (Zn 5.6,
Mg 2.5, Cu 1.6, Cr 0.23) (7075)
ACE/61/-/24 obsolescent (2010) Reconfirmation
BS MA 2-1:1985 Magnetic compasses and binnacles. -- Specification for
class A magnetic compasses, their binnacles and
azimuth reading devices (including test procedures)
EPL/80 confirmed (2008) Withdrawal
BS MA 2-4:1985 Magnetic compasses and binnacles. -- Glossary of
terms
EPL/80 confirmed (2008) Withdrawal
BS MA 2-8:1985 Magnetic compasses and binnacles -- Specification for
transmitting systems and off-course alarms for class A
magnetic compasses
EPL/80 confirmed (2008) Withdrawal
BS SP 55 and SP 56:1953Specifications for double coil spring washers for aircraft ACE/12 obsolescent (2011) Withdrawal
BS X 38:2005 Heat curing paint scheme for aerospace purposes.
Specification
ACE/65/-/3 current
CP 1018:1971 Electric floorwarming systems for use with off-peak and
similar supplies of electricity
JPEL/64 obsolescent (2008) Withdrawal
CP 143-1:1958 Code of practice for sheet roof and wall coverings --
Aluminium, corrugated and troughed
B/542/6 obsolescent (2010) Withdrawal
DD 180:1989 Guide for the assessment of toxic hazards in fire in
buildings and transport
FSH/16 partially replaced by
BS 7899-1:1997 and
BS 7899-2:1999
Withdrawal
Updated Nov 2013 37 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
DD 261:2010 Human reliability. Guide to the fundamental
considerations
DS/1 current Withdrawal
DD 263:2010 Intruder and hold-up alarm systems. Commissioning,
maintenance and remote support. Code of practice
GW/1/2 current
DD 61010-100:2007 Safety requirements for electrical equipment for
measurement, control and laboratory use -- Particular
requirements for equipment rated for use by children
and young people in educational establishments
EPL/66 current Withdrawal
DD 8458-1:2010 Fixed fire protection systems. Residential and domestic
watermist systems -- Code of practice for design and
installation
FSH/18/2 current
DD 8489-1:2011 Fixed fire protection systems. Industrial and commercial
watermist systems -- Code of practice for design and
installation
FSH/18 current
DD 8489-4:2011 Fixed fire protection systems. Industrial and commercial
watermist systems -- Tests and requirements for
watermist systems for local applications involving
flammable liquid fires
FSH/18 current
DD 8489-5:2011 Fixed fire protection systems. Industrial and commercial
watermist systems -- Tests and requirements for
watermist systems for the protection of combustion
turbines and machinery spaces with volumes up to and
including 80 m$u3
FSH/18 current
DD 8489-6:2011 Fixed fire protection systems. Industrial and commercial
watermist systems -- Tests and requirements for
watermist systems for the protection of industrial oil
cookers
FSH/18 current
DD 8489-7:2011 Fixed fire protection systems. Industrial and commercial
watermist systems -- Tests and requirements for
watermist systems for the protection of low hazard
occupancies
FSH/18 current
NA to BS EN 1990:2002+A1:2005UK National Annex for Eurocode. Basis of structural
design
B/525/1 current Confirmation
NA to BS EN 1991-1-1:2002UK National Annex to Eurocode 1. Actions on structures
-- Densities, self-weight, imposed loads for buildings
B/525/1 current Confirmation
NA to BS EN 1991-1-2:2002UK National Annex to Eurocode 1. Actions on structures
-- Actions on structures exposed to fire
B/525/1 current Confirmation
NA to BS EN 1991-1-3:2003UK National Annex to Eurocode 1. Actions on structures
-- Snow loads
B/525/1 current Confirmation
NA to BS EN 1991-1-4:2005+A1:2010UK National Annex to Eurocode 1. Actions on structures
-- Wind actions
B/525/1 current Confirmation
NA to BS EN 1991-1-5:2003UK National Annex to Eurocode 1. Actions on structures
-- Thermal actions
B/525/1 current Confirmation
NA to BS EN 1991-1-6:2005UK National Annex to Eurocode 1. Actions on structures
-- Actions during execution
B/525/1 current Confirmation
NA to BS EN 1991-1-7:2006National Annex to Eurocode 1. Actions on structures --
Accidental actions
B/525/1 current Confirmation
NA to BS EN 1991-2:2003UK National Annex to Eurocode 1. Actions on structures
-- Traffic loads on bridges
B/525/10 current Confirmation
NA to BS EN 1991-3:2006UK National Annex to Eurocode 1. Actions on structures
-- Actions induced by cranes and machinery
B/525/1 current Confirmation
NA to BS EN 1991-4:2006UK National Annex to Eurocode 1. Actions on structures
-- Silos and tanks
B/525/1 current Confirmation
NA to BS EN 1992-1-1:2004UK National Annex to Eurocode 2. Design of concrete
structures -- General rules and rules for buildings
B/525/2 current Confirmation
NA to BS EN 1992-1-2:2004UK National Annex to Eurocode 2. Design of concrete
structures -- Structural fire design
B/525/2 current Confirmation
Updated Nov 2013 38 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
NA to BS EN 1992-2:2005UK National Annex to Eurocode 2. Design of concrete
structures -- Concrete bridges. Design and detailing
rules
B/525/2 current confirmation
NA to BS EN 1992-3:2006UK National Annex to Eurocode 2. Design of concrete
structures -- Liquid retaining and containment structures
B/525/2 current Confirmation
NA to BS EN 1993-1-1:2005UK National Annex to Eurocode 3. Design of steel
structures -- General rules and rules for buildings
CB/203 current Confirmation
NA to BS EN 1993-1-10:2005National Annex (informative) to Eurocode 3. Design of
steel structures -- Material toughness and through
thickness properties
CB/203 current Confirmation
NA to BS EN 1993-1-11:2006UK National Annex to Eurocode 3. Design of steel
structures -- Design of structures with tension
components
CB/203 current Confirmation
NA to BS EN 1993-1-12:2007UK National Annex to Eurocode 3. Design of steel
structures -- Additional rules for the extension of EN
1993 up to steel grades S 700
CB/203 current Confirmation
NA to BS EN 1993-1-2:2005UK National Annex to Eurocode 3. Design of steel
structures -- Structural fire design
CB/203 current Confirmation
NA to BS EN 1993-1-3:2006UK National Annex to Eurocode 3. Design of steel
structures -- Supplementary rules for cold-formed
members and sheeting
CB/203 current Confirmation
NA to BS EN 1993-1-4:2006UK National Annex to Eurocode 3. Design of steel
structures -- Supplementary rules for stainless steels
CB/203 current Confirmation
NA to BS EN 1993-1-5:2006UK National Annex to Eurocode 3. Design of steel
structures -- Plated structural elements
CB/203 current Confirmation
NA to BS EN 1993-1-8:2005UK National Annex to Eurocode 3. Design of steel
structures -- Design of joints
CB/203 current Confirmation
NA to BS EN 1993-1-9:2005UK National Annex to Eurocode 3. Design of steel
structures -- Fatigue
CB/203 current Confirmation
NA to BS EN 1993-3-1:2006UK National Annex to Eurocode 3. Design of steel
structures -- Towers and masts
CB/203 current Confirmation
NA to BS EN 1993-6:2007UK National Annex to Eurocode 3. Design of steel
structures -- Crane supporting structures
CB/203 current Confirmation
NA to BS EN 1994-1-1:2004UK National Annex to Eurocode 4. Design of composite
steel and concrete structures -- General rules and rules
for buildings
B/525/4 current Confirmation
NA to BS EN 1994-1-2:2005UK National Annex to Eurocode 4. Design of composite
steel and concrete structures -- Structural fire design
B/525/4 current Confirmation
NA to BS EN 1994-2:2005UK National Annex to Eurocode 4. Design of composite
steel and concrete structures -- General rules and rules
for bridges
B/525/4 current Confirmation
NA to BS EN 1995-1-1:2004+A1:2008UK National Annex to Eurocode 5: Design of timber
structures -- General. Common rules and rules for
buildings
B/525/5 current Confirmation
NA to BS EN 1995-1-2:2004UK National Annex to Eurocode 5. Design of timber
structures -- Structural fire design
B/525/5 current Confirmation
NA to BS EN 1995-2:2004UK National Annex to Eurocode 5. Design of timber
structures -- Bridges
B/525/5 current Confirmation
NA to BS EN 1996-1-2:2005UK National Annex to Eurocode 6. Design of masonry
structures -- Structural fire design
B/525/6 current Confirmation
NA to BS EN 1996-2:2006UK National Annex to Eurocode 6. Design of masonry
structures -- Design considerations, selection of
materials and execution of masonry
B/525/6 current Confirmation
NA to BS EN 1996-3:2006UK National Annex to Eurocode 6. Design of masonry
structures -- Simplified calculation methods for
unreinforced masonry structures
B/525/6 current Confirmation
NA to BS EN 1997-1:2004UK National Annex to Eurocode 7. Geotechnical design -
- General rules
B/526 current Revision in progress
NA to BS EN 1997-2:2007UK National Annex to Eurocode 7. Geotechnical design -
- Ground investigation and testing
B/526/3 current Confirmation
Updated Nov 2013 39 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
NA to BS EN 1998-1:2004UK National Annex to Eurocode 8. Design of structures
for earthquake resistance -- General rules, seismic
actions and rules for buildings
B/525/8 current Confirmation
NA to BS EN 1998-2:2005UK National Annex to Eurocode 8. Design of structures
for earthquake resistance -- Bridges
B/525/8 current Confirmation
NA to BS EN 1998-4:2006UK National Annex to Eurocode 8. Design of structures
for earthquake resistance -- Silos, tanks and pipelines
B/525/8 current Confirmation
NA to BS EN 1998-5:2004UK National Annex to Eurocode 8. Design of structures
for earthquake resistance -- Foundations, retaining
structures and geotechnical aspects
B/525/8 current Confirmation
NA to BS EN 1998-6:2005UK National Annex to Eurocode 8. Design of structures
for earthquake resistance -- Towers, masts and
chimneys
B/525/8 current Confirmation
NA to BS EN 1999-1-1:2007+A1:2009UK National Annex to Eurocode 9. Design of aluminium
structures -- General structural rules
B/525/9 current Confirmation
NA to BS EN 1999-1-2:2007UK National Annex to Eurocode 9. Design of aluminium
structures -- Structural fire design
B/525/9 current Confirmation
NA to BS EN 1999-1-3:2007+A1:2011UK National Annex to Eurocode 9. Design of aluminium
structures -- Structures susceptible to fatigue
B/525/9 current Confirmation
NA to BS EN 1999-1-4:2007UK National Annex to Eurocode 9. Design of aluminium
structures -- Cold-formed structural sheeting
B/525/9 current Confirmation
NA to BS EN 1999-1-5:2007UK National Annex to Eurocode 9. Design of aluminium
structures -- Shell structures
B/525/9 current Confirmation
NA+A1:2012 to BS EN 1993-2:2006UK National Annex to Eurocode 3. Design of structures -
- Steel bridges
B/525/10 current Confirmation
NA+A1:2012 to BS EN 1993-5:2007UK National Annex to Eurocode 3: Design of steel
structures -- Piling
CB/203 current Confirmation
PD 0026:2003 Software and systems quality framework. A guide to the
use of ISO/IEC and other standards for understanding
quality in software and systems
IST/15 confirmed (2008) Reconfirmation
PD 156865:2008 Standardized method of life cycle costing for
construction procurement. A supplement to BS ISO
15686-5. Buildings and constructed assets. Service life
planning. Life cycle costing
CB/101 current Confirmation
PD 2777:1994 Fabric flammability and burning accidents TCI/66/-/8 obsolescent (2008) Withdrawal
PD 6487:1979 Guide for calculating the life of ball bearings when used
in contact with fire resistant hydraulic fluids
MCE/18 obsolescent (2009) Withdrawal
PD 6505:1982 Guide to the romanization of Korean IDT/2 obsolescent (2010) Withdrawal
PD 6510:1983 A review of the present state of the art of assessing
remanent life of pressure vessels and pressurized
systems designed for high temperature service
PVE/1 obsolescent (2010) withdrawal
PD 6523:1989 Information on access to and movement within and
around buildings and on certain facilities for disabled
people
B/559 obsolescent (2008) Withdrawal
PD 6533:1993 Guide to methods for assessing the durability of
geotextiles. An interim document
B/553 confirmed (2008) Reconfirmation
PD 6560:1992 A draft amendment to BS 6305:1992 "Specification for
general requirements for apparatus for connection to
public switched telephone networks run by certain public
telecommunications operators"
TCT/2 obsolescent (2011) withdrawal
Updated Nov 2013 40 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
PD 6561:1992 A draft amendment to BS 6789-1:1984 "Apparatus with
one or more particular functions for connection to the
British Telecommunications public switched telephone
network. Part 1. Specification for general requirements"
TCT/2 obsolescent (2011) withdrawal
PD 6562:1992 A draft amendment to BS 6789-3.1:1985 'Apparatus
with one or more particular functions for connection to
the British Telecommunications public switched
network. Part 3. Apparatus with auto-calling, auto-
answering and auto-clearing facilities. Section 3.1.
Specification for auto-calling facilities'
TCT/2 obsolescent (2011) withdrawal
PD 6563:1992 A draft amendment to BS 6789-3.2:1987 "Apparatus
with one or more particular functions for connection to
certain public switched telephone networks. Part 3.
Apparatus with auto-calling, auto-answering and auto-
clearing facilities. Section 3.2. Specification for auto-
answering and auto-clearing facilities"
TCT/2 obsolescent (2011) withdrawal
PD 6564:1992 A draft amendment to BS 6789-6.1:1986 "Apparatus
with one or more particular functions for connection to
certain public switched telephone networks. Part 6.
Specification for series connected apparatus. Section
6.1. Apparatus having maximum allowable impairments"
TCT/2 obsolescent (2011) withdrawal
PD 6565:1992 A draft amendment to BS 6789-6.2:1989 "Apparatus
with one or more particular functions for connection to
public switched telephone networks run by certain public
telecommunications operators. Part 6. Specification for
series connected apparatus. Section 6.2. Apparatus
having less than maximum allowable impairments"
TCT/2 obsolescent (2011) withdrawal
PD 6566:1992 A draft amendment to BS 6789-7:1988 "Apparatus with
one or more particular functions for connection to public
switched telephone networks run by certain public
telecommunications operators. Part 7. Specification for
apparatus with call barring facilities"
TCT/2 obsolescent (2011) withdrawal
PD 6567:1992 A draft amendment to BS 6833-1:1987 "Apparatus
using cordless attachments (excluding cellular radio
apparatus) for connection to analogue interfaces of
public switched telephone networks. Part 1.
Specification for general requirements"
TCT/2 obsolescent (2011) withdrawal
PD 6571:1992 Text for BS 6789-2:1992 "Apparatus with one or more
particular functions for connection to public switched
telephone networks run by certain public
telecommunication operators. Part 2. Specification for
apparatus with loudspeaking facilities"
TCT/2 obsolescent (2011) withdrawal
PD 6572:1992 Text for BS 6833:Part 6:1992 "Apparatus using cordless
attachments (excluding cellular radio apparatus) for
connection to analogue interfaces of public switched
telephone networks. Part 6. Specification for cordless
portable parts and cordless fixed parts as separate
stand alone items of apparatus"
TCT/2 obsolescent (2011) withdrawal
PD 6634-1:1999 Vehicle restraint systems -- Fundamentals. Database B/509/1 obsolescent (2011) Reconfirmation
Updated Nov 2013 41 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
PD 6634-2:1999 Vehicle restraint systems -- Fundamentals of highway
restraint systems
B/509/1 obsolescent (2011) Reconfirmation
PD 6634-3:1999 Vehicle restraint systems -- Development of vehicle
highway barriers in the United Kingdom
B/509/1 obsolescent (2011) Reconfirmation
PD 6634-4:1999 Vehicle restraint systems -- Development of bridge
parapets in the United Kingdom
B/509/1 obsolescent (2011) Reconfirmation
PD 6634-5:1999 Vehicle restraint systems -- Development of barrier
transitions and terminals
B/509/1 obsolescent (2011) Reconfirmation
PD 6634-6:1999 Vehicle restraint systems -- Crashworthy roadside
features. Impact attenuators
B/509/1 obsolescent (2011) Reconfirmation
PD 6687-2:2008 Recommendations for the design of structures to BS EN
1992-2:2005
B/525/2 current Confirmation
PD 6688-1-7:2009 Recommendations for the design of structures to BS EN
1991-1-7
B/525/1 current Confirmation
PD 7002:1996 Essential requirements for connection of terminal
equipment to 2-wire analogue interfaces, without
capacitive termination, of public switched
telecommunication networks using either the earth
calling, the loop calling-disconnect clearing, the loop
calling-guarded clearing or the loop calling-unguarded
clearing signalling method
TCT/2 current
PD 7003:1996 Essential requirements for terminal equipment intended
for connection to analogue interfaces of the PSTN using
direct dialling in
TCT/2 current
PD 7004:1995 Essential requirements for terminal equipment intended
for connection to digital interfaces of the PSTN using
Digital Access Signalling System No.2 (DASS 2)
TCT/6 current Confirmation
PD 7005:1996 Essential requirements for terminal equipment intended
for connection to the extended total access
communications system (ETACS)
TCT/- current Confirmation
PD 7006:1995 Essential requirements for terminal equipment intended
for connection to digital interfaces of the PSTN using
channel associated signalling
TCT/6 current Confirmation
PD 7010:1997 Essential requirements for a handset telephony facility
provided by terminal equipment intended for direct
connection to an analogue interface of the public
switched telephone network
TCT/2 current Withdrawal
PD 7020:1996 Essential requirements for terminal equipment intended
for connection to 2-wire analogue speechband leased
lines of the public telecommunications network
TCT/2 current
PD 7021:1996 Essential requirements for terminal equipment intended
for connection to 4-wire analogue speechband leased
lines of the public telecommunications network
TCT/2 current
PD 7024:1994 Essential requirements for terminal equipment intended
for connection to unstructured digital leased circuits of
the public telecommunications network using a CCITT
Recommendation G.703 interface at a rate of 2048
kbit/s with a 75 $Gw unbalanced presentation
TCT/6 current Confirmation
PD 7025:1994 Essential requirements for terminal equipment intended
for connection to unstructured digital leased circuits of
the public telecommunications network using a CCITT
Recommendation G.703 interface at a rate of 8448
kbit/s with a 75 ohms unbalanced presentation
TCT/6 current Confirmation
Updated Nov 2013 42 of 43
Email your comments to: [email protected]
Your email subject line: eg: 2013 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier Title Committee Status (previous) Final Review Outcome
PD 7026:1994 Essential requirements for terminal equipment intended
for connection to unstructured digital leased circuits of
the public telecommunications network using a CCITT
Recommendation G.703 interface at a rate of 34368
kbit/s with a 75 $GW unbalanced presentation
TCT/6 current Confirmation
PD 7027:1995 Essential requirements for terminal equipment intended
for connection to digital leased circuits of the public
telecommunications network using a CCITT
Recommendation X.21bis interface
TCT/6 current Confirmation
PD 7028:1996 Essential requirements for terminal equipment intended
for connection to analogue baseband leased lines of the
public telecommunications network
TCT/2 current
Updated Nov 2013 43 of 43