eliminate c3 fuel injector replacement with · - c3 injectors with flow limiters (part number...
TRANSCRIPT
Extend Injector Life with NanoNet® Fuel FiltersTake Your Injectors the Distance.
Eliminate C3 Fuel Injector
Replacement with
Sustain Like New Performance.Cummins Filtration and the Cummins Engine Company have eliminated the need for midlife fuel injector
replacement for C3 injectors, while still providing the best protection possible for your equipment.
Fleetguard technology extends fuel injector life resulting in the lowest total cost of ownership
and longest service intervals of any fuel injector, all backed by the best warranty in the business.
cumminsfiltration.comLT36638 ©2018 Cummins Filtration, Printed in USA
Cummins RequirementsIn order to meet the Cummins requirements for eliminating
C3 injector midlife replacement, you must meet the
requirements referred to in procedure 018-024, Section V
of the maintenance manual for fuel filter specifications or
the Extended Service Interval Program referenced in bulletin
4388840 (Mining) or 5411272 (Powergen).
Applicable Engines• QSK19 Tier 2• QSK38 Tier 2 & 3• QSK50 Tier 2 & 3• QSK60 Tier 2 & 3
Higher Performance. Lower Operating Expenses.
Typical Costs of C3 Injector Mid-life Service • Up to $48,000 ($3,000 per injector)
• 20 hours of downtime (1.3 hours per injector)
Dirty fuel injectors rob engines of their power. Clean injectors provide better
fuel economy, reduced emissions, smooth operation, and desired performance.
- C3 Injectors with flow limiters (Part number 2867148 or 2867148NX)
- Must have fuel sulfur level below 500ppm
- If not using C3 injectors with limiters, contact your local Cummins Distributor
Fleetguard fuel filters with NanoNet media are
specifically designed for the higher pressures and
tighter tolerances of an MCRS engine and provide:
• Removes and retains 10-13x more contaminants than competitive medias
• Up to 14x longer service life than the competition
• Unmatched fuel injection protection over the service life of the filter
Must use Fleetguard NanoNet Stage 1 and Stage 2 Filtration to Qualify
Best Case Fleetguard NanoNet Service Interval
Stage 1 Filtration4,000
3,500
3,000
2,500
2,000
1,500
1,000
500
0
Serv
ice
Inte
rval
s(Ho
urs)
Stage 2 Filtration
Typical Fleetguard NanoNet Service Interval
Best Case Conventional
Service Interval
Typical Conventional
Service Interval
Extends!
3500
2000
1000
500 500
250 250
Stage 1 Filtration
Engine Product Description Fleetguard ElementPart Number
QSK19 FH239 Series Industrial Pro FS53015 or FS53014
QSK38 FH240 SeaPro Series FS53021
QSK50 FH239 Series Industrial Pro FS53014
QSK60 FH240 SeaPro Series FS53022
Stage 2 Filtration
Engine Filter Part Number
QSK19 FF255, FF5782NN, FF63044NN
QSK38
FF256, FF5782NN, FF63042NNQSK50
QSK60
1000