elgin self-priming, solids-handling centrifugal …...pump interior. with over 25 years of...

ELGINSEPARATION SOLUTIONS

10050 Cash RoadStafford, Texas 77477 • 281-261-5778www.elginseparationsolutions.com

Mining • Minerals • WaterOil & Gas • Rendering • TrenchlessRenewables • Utilities • Industrials

Self-Priming, Solids-Handling Centrifugal Pumps

Pump Features

------------------------

Solids Handling Impeller

Two-vane, semi-open, solids-handling impeller can handle solids up to 3’’ (76 mm) in diameter.

------------------------

Mechanical Cartridge Seal

Oil-lubricated mechanical cartridge seal with stationary

and rotating face of silicon carbide is

designed for abrasive service.

------------------------

Removable Rotating Assembly

As a single unit, the rotating assembly can be removed through

the removable coverplate.

------------------------

Easily Removed Coverplate

Coverplate comes standard with two

handles for quick and easy access to the

pump interior.

With over 25 years of experience in designing and manufacturing reliable solids control equipment for the oil & gas industry, Elgin recognizes the need for reliable and efficient self-priming pumps. Elgin’s line of self-priming, solids-handling pumps have been designed to reliably handle a myriad of solids-laden fluids with minimal maintenance.

Based on one of the industry’s most field-proven pump configurations, Elgin’s line of self-priming solids-handling pumps offer a trouble-free, non-clogging design. The large volute automatically reprimes in a fully open system, without the need for complicated suction or discharge plumbing.

As a self-priming pump, the pump can be installed at heights above the solids-laden fluid being pumped. Service can be performed in-situ, without the use of special tools or disconnecting the suction or discharge plumbing. The dual-vane impeller, seal, wear plate, and flap valve can be easily accessed via the removable coverplate.

Pump Models: ESS-SPP-T2 ESS-SPP-T3 ESS-SPP-T4

Inlet and Outlet Flange Size:

2’’ (51 mm) x 2’’ 3’’ (76 mm) x 3’’ 4’’ (102 mm) x 4’’

Max Lifting Head (1850 RPM):

25’ (7.6 m) 25’ (7.6 m) 25’ (7.6 m)

Max Solids Handling: 1.75’’ (44 mm) 2.5’’ (64 mm) 3’’ (76 mm)

Impeller Diameter: 6.25’’ (159 mm) 8.75’’ (222 mm) 9.75’’ (248 mm)

Total Net Weight: 203 lb (92 kg) 404 lb (183 kg) 600 lb (260 kg)

NEMA Motors Available:

10 & 15 hp 15, 20 & 25 hp 25, 30 & 40 hp




ESS-SPP-T22’’ x 2’’ Solids-handling, self-priming pump.

ESS-SPP-T33’’ x 3’’ Solids-handling, self-priming pump.

ESS-SPP-T4

4’’ x 4’’ Solids-handling, self-priming

pump.

Available in 2” (51 mm), 3” (76 mm), and 4” (102 mm), Elgin’s self-priming, solids-handling pumps are capable of achieving 1,300 gallons per minute (38 lps) at 25 feet (7.6 m) of head pressure. This can be achieved, even when handling solids up to 3” (76 mm) in diameter.










Submersible Trash Pumps

Elgin can also provide a host of submersible

trash pumps in hydraulic and electric

configurations.

Centrifugal Pumps

Based on the industry’s most

field-proven centrifugal pumps, Elgin maintains a complete line of

Series 118 and 250 centrifugal pumps.

Component Standard Materials Grade Alternatives (Available Upon Request)

Casing and Flange: Cast Iron ASTM-48 CL30

Austempered Ductile Iron and Stainless Steel (CD4MCu and 316)

Impeller: Ductile Iron ASTM 60-40-18

Wear Plate: Ductile Iron ASTM 60-40-18

Cover & Seal Plate Cast Iron ASTM 48-CL30

Bearing Housing: Cast Iron ASTM 48-CL30

Flap Valve: Neoprene N/A Viton

Sleeve Shaft: Carbon Steel SAE 4140 HT 17-4 Stainless

O-Rings: Buna Rubber N/A Viton

Impeller Shaft: Carbon Steel SAE 4140 HT 17-4 Stainless

Mechanical Seal: 316 Stainless Steel Body, Viton O-Rings & WC Faces N/A

Internal Coatings: N/A N/A Epoxy & Ceramic

Depending on the application, Elgin’s self-priming, solids-handling pumps can be provided in a variety of materials of construction. The table below highlights the standard materials of construction, along with the alternatives available:




Elgin Separation Solutions offers a complete line of Progressive Cavity Pumps

To ensure a well-balanced feed, with consistent feed pressure, Elgin can supply a variety of custom-configured progressive-cavity feed pumps (“PC pumps”). PC pumps can extend the life of a centrifuge, and reduce overall operations and maintenance costs when properly operated.

Elgin PC Pump packages can be supplied in a variety of skid configurations (i.e. wide field skid and narrow plant skid) and a variety of motor installation configurations (i.e. in-line, offset, and “piggy-back”).

Elgin’s PC pumps are mated with a premium gearbox and premium, continuous duty, energy-efficient, explosion-proof motor (non-explosion proof motors are for applications requiring UL or CSA certification for hazardous locations.

Pump Models: KTPC-NM063-P101 KTPC-NM090-P101

Capacity: 200 gpm (12.62 lps) 400 gpm (25 lps)

S.G.: 1.2 1.2

Suction: Flooded Flooded

Temp: 20oC / 68oF 20oC / 68oF

Viscosity: 600 cP 600 cP

Delivery: 50 psi (3.4 bars) 50 psi (3.4 bars)

NPSH(r): 8.2 ft (2.5m) 11.5 ft (3.5m)

Variation of above information may affect pump duty point, drive kW/ rpm or selected pump materials.

Elgin can supply a variety of custom-configured progressive-cavity feed pumps.

KTPC-NM063-P101

KTPC-NM090-P101

elgin self-priming, solids-handling centrifugal …...pump interior. with over 25 years of...

Documents