ssmmaarrtt ccaarrdd for the storage of about 200 tests

The Static Plate Bearing Test according to DIN 18134 : 2001-09 is used in earth-works and substructure for road and railway construction to determine thedeformability and bearing capacity of soils and sub bases.

■ Electronic evaluation

■ immediate printing

■ storage of test results

■ compact design

■ simple 4-button user interface

■ Excel-Sheets

■ high class design

■ long operation time

■ robust und durableMade in Germany

Anix GmbHELECTRONIC PRECISION INSTRUMENTS

Anix GmbHE L E C T R O N I C D E V E L O P M E N T

AX 01The new GenerationAAXX 0011 PPllaattee BBeeaarriinngg TTeesstteerreelleeccttrroonniicc eevvaalluuaattiioonn ·· mmiinnii pprriinntteerr ·· ccoommppaacctt ddeessiiggnn

AX 01The new GenerationAAXX 0011 PPllaattee BBeeaarriinngg TTeesstteerreelleeccttrroonniicc eevvaalluuaattiioonn ·· mmiinnii pprriinntteerr ·· ccoommppaacctt ddeessiiggnn

For the test, the soil is loaded and unlo-aded in fixed steps using a circular loa-ding plate and a hydraulic loadingdevice. The normal stress below theplate and the corresponding deflec-tions of the plate are recorded andshown in a diagram. The electronicdevice AX 01 is the simple solution todetermine the strain moduli Ev2 andEv1 (a figure for the bearing capacity)and the ratio Ev2/Ev1 (a figure for thecompaction level).

The results of the test are evaluatedimmediately, shown at the display, andprinted with the built-in thermo printerat the road-works. It is usable evenunder bad environmental conditions –e.g. in rain – because of the rain pro-ofed case, a illuminated display andbuttons at the outside. The test results– stored at the smart card – can be usedwith Microsoft Excel.

The unrivalled AX01 feature is itsoutstanding and stainless pro-duct design. It is equipped withruggedised and rain proofedindustrial sensors to achieve pre-cision test results.

Due to the compact design of thetest tripod the device fits in thecar boot.

The dimensions are:LxWxH 1150 mm x 340 x 260 mm

Meitzendorf, Hintern Hecken 1 · 39179 Barleben · Germany · Tel. + 49 (0)3 92 02 87 92 52 · Fax + 49 (0)3 92 02 87 92 57 · biz@anix.biz

compact design for comfortable trans-portation

Technical specifications: Subject to change without noticeMay, 2006

EElleeccttrroonniicc ddeevviiccee::- case made from PET, the transparent top cover with scratch-resistant surface- thermo printer with 57 mm print width- 1 smart card for the storage of approximately 200 tests- plate diameters are adjustable: 300 mm, 600 mm, 762 mm- lever ratio is adjustable in the range 1:1 to 1:2- precision (resolution):

deflection 0,01 mmnormal stress 0,0001 MN/m2 (printed and stored)0,001 MN/m2 (displayed)

- rechargeable battery, 9.6 volts, 5Ah, fast charger 2h, for about 48 h of non-stop use

- weight about 4.5 kg

TTeesstt ttrriippoodd::- direct measurement of the deflection according to DIN 18134

(displacement test with one sensor only)- test arm extractable/fold-out-able- round foots for optimal placement at rough and/or soft surfaces- short (250 mm) and long (500 mm) fixture for the displacement sensor- displacement sensor is made from stainless steel, stroke of the sensor: 15 mm- dimensions: folded L x B x H 1150 x 340 x 260 mm

unfolded L x B x H 2330 x 340 x 310 mm- distance (mid of loading plate – axis of front foots): 1500 mm- weight: 13.9kg

LLooaaddiinngg aappppaarraattuuss::- hydraulic jack assembly with jack for 100kN force, manual hydraulic pump and

2 m high pressure hose- bearing plate made from steel S355JO, stainless surface,

diameter 300 mm, tunnel for the displacement sensor- force sensor 100kN made from stainless steel- extension set (2 x 25 mm, 2 x 50 mm, 2 x 100 mm, 2 x 150 mm,

complete height 650 mm, complete weight 3.1 kg)- upper magnetic ball joint (loadable up to 60kN, weight 0.9 kg)

DDiimmeennssiioonnss::- height of the hydraulic jack (retracted): 285 mm, stroke 150 mm- weight of the hydraulic jack assembly (jack + pump + hose): 9.5 kg- bearing plate with force sensor mounted: diameter 300 mm, height 265mm,

weight: 22.6 kg

- weight complete: (without packaging, without transport box): 54.9 kg

Anix GmbHELECTRONIC PRECISION INSTRUMENTS

Anix GmbHELECTRONIC PRECISION INSTRUMENTS