GF30.33-W-0003-01A Electronic engine control (EMR) function diagram

W07.12-0022-09

1 Operating lever (cruise control/Temposet) 14 14-pin diagnostic socket or, with FDS/FSS, display computer 2 EMR fault indicator lamp connection 3 Ignition lock 15 Actuator4 Retarder steering column switch (special equipment, actuation 16 Mechanical 2-shaft governor RQ, RQV or RQV-K characteristic)of engine brake function in stages 1-5) 17 RPM sensor (RPM from starter ring gear)5 I-module (connection for C3 signal) 18 Hand throttle actuator (special equipment or customer retrofit, to 6 MN module (engine not running/engine speed signal) control a power take-off)7 E-module (EMR control unit) 19 Shut-off cylinder (acts on shut-off shaft)8 Connecting linkage 20 Compressed-air reservoir (circuit 4)9 Accelerator pedal sensor 21 Starter button on engine10 Accelerator pedal 22 Engine shut-off solenoid valve11 Emergency driving cable pull (if necessary, remove lead seal 23 Actuation by throttle valve pressure switch (standard production) and hook in) when engine brake is operated.12 Tachograph 24 Actuation of engine brake flaps (with special equipment ASR 13 ABS/ASR control unit (special equipment, ASR control) only)

25 Engine brake switch (electrical foot-operated switch with special equipment ASR)

Copyright Daimler AG 2008.12.12. G/04/08. Ezt a WIS-nyomtatást a módosításszolgáltató nem regisztrálta. 1 oldal