electromagnetic compatibility of integrated circuits labo cem christophe lemoine winter summary (in...
Post on 19-Dec-2015
221 views
TRANSCRIPT
Electromagnetic Compatibility of Integrated Circuits
TMTM
LABO CEMChristophe Lemoine
Winter Summary
(in preparation for Jan, 20th, 2010)
2 TMTM
The Laboratory has moved to a bigger room since end of 2009 3 test benches available
Equipment Purchase Oscilloscope Lecroy 2GHz Amplifier Teseq 800 Mhz - 3.1 GHz, 50 W Amplifier Teseq 10MHz - 1GHz, 70 W
Planning Tool This tool gives a better visibility of laboratory use Each users can reserve test bench easily
Network. All test bench are connected to INSAT network Data security. Automatic backup are done A better data sharing between users Data are not user-dependant Accessibility with an INSAT login
LABO CEM - What’s New ?
3 TMTM
LABO CEM – Capability 1/2
CEM Measurements
Radiated Immunity1MHz – 3.1GHz
150 dBµV
Radiated Emission9kHz – 3GHz
Conducted Immunity1MHz – 3.1GHz
Conducted Emission9kHz – 3GHz Coupling Network
4 TMTM
LABO CEM – Capability 2/2
Ageing or temperature investigation with climatic chamber
Board Design with Altium Designer
S parameter measurements with VNA R&S ZVL 6GHz and 6 Coplanar GS probes with pitches from 500 µm to 1.2 mm
IV measurements with precision SourceMeter KEITHLEY
Advanced default monitoring with Lecroy oscilloscope LT342 500MHz WaveRunner 204MXi 2GHz
Soldering tool adapted to CMS component
5 TMTM
LABO CEM - Prospective 2010
Purchase Faraday Cage. 3mx2m for BCI and Emission measurements
BCI measurements The labo will be able to do BCI measurements with the purchase of the faraday cage and
the new amplifier TESEQ
DPI measurements Improve the repeatability of the Dpi measurements
Upgrade the Bias Tee
Upgrade Power control algorithm
Lab use Binhong Li - Mixity
? – EPEA
Christopher Peron – Rosie
Improve Lab visibility
Trainee about characterization of embedded sensor ?